RE: need help in identifying a 1500 (?)

[Bill Bulkeley]

This does look legacy and should mesh if it is legacy try it with one of the 
known legacy gears and see if it does mesh ok. place them both on 6 blocks all 
the same 3 on each gear flat on a table push then together and rotate they will 
either be right or totally wrong

 

That’s to my way of thinking

 

Bill

 

From: 'joe biunno' via Legacy Ornamental Mills 
[mailto:legacy-ornamental-mills@googlegroups.com] 
Sent: Tuesday, 1 August 2017 5:52 AM
To: Legacy Ornamental Mills
Subject: Re: need help in identifying a 1500 (?)

 

next up is a close-up of one of the gears...the gears seem to be a bit 
different in that there is no flat spot in the "valley" between two gear teeth, 
as the gears that came with my 1800(and some gears that I purchased from legacy 
not too long ago)...the gear teeth here are pointed and the "valley" also comes 
to a point(i.e. no flat spot)...is this how earlier gears were made?...does 
this type of gear work with the newer type of gears?...thanks...joe

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

 


 

 

Virus-free.  

 www.avg.com 

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

RE: need help in identifying a 1500 (?)

[Bill Bulkeley]

I do not believe that is legacy i have never seen anything like it and it looks 
too roughly made to be genuine and of course it’s not red

 

Bill

 

From: 'joe biunno' via Legacy Ornamental Mills 
[mailto:legacy-ornamental-mills@googlegroups.com] 
Sent: Tuesday, 1 August 2017 5:43 AM
To: Legacy Ornamental Mills
Subject: Re: need help in identifying a 1500 (?)

 

i'll start with a photo of the tailstock...is this a legacy piece?...seems to 
fit too well to think that someone found a tailstock from a different machine 
and modified it to fit this legacy...number 2 morse taper...I might think the 
long slots in the base of the tailstock could accommodate some taper 
work?...but how it is made and finished suggests it is not a factory, legacy 
piece...again, I welcome any and all comments and explanations...thanks...joe

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

 


 

 

Virus-free.  

 www.avg.com 

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

RE: new video on youtube, dust collection

[Bill Bulkeley]

Nice but how do you see what’s going on when milling

 

Bill

 

 

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Russ Veinot
Sent: Tuesday, 1 August 2017 10:20 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: new video on youtube, dust collection

 

Sorry, I gave the wrong link to the legacy video.  The right one is 
https://www.youtube.com/watch?v=cvtOb84CmRw 
 =12s 

 

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Russ Veinot
Sent: Monday, July 31, 2017 5:58 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: new video on youtube, dust collection

 

I just publish another video about dust collection improvements on my 1200 if 
interested  https://www.youtube.com/watch?v=ogy_c94Yt3o 
 =192s 

Comments are always welcome :>)

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

 


 

 

Virus-free.  

 www.avg.com 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: new video on youtube, dust collection

[parr454 via Legacy Ornamental Mills]

Nice !

 

 

 

-Original Message-
From: Russ Veinot 
To: legacy-ornamental-mills 
Sent: Mon, Jul 31, 2017 8:20 pm
Subject: RE: new video on youtube, dust collection



Sorry, I gave the wrong link to the legacy video.  The right one is 
https://www.youtube.com/watch?v=cvtOb84CmRw=12s 
 

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Russ Veinot
Sent: Monday, July 31, 2017 5:58 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: new video on youtube, dust collection

 
I just publish another video about dust collection improvements on my 1200 if 
interested  https://www.youtube.com/watch?v=ogy_c94Yt3o=192s 
Comments are always welcome :>)
 
-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.


-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: need help in identifying a 1500 (?)

[Tim Krause]

Hi Joe,

Yes that is a model 1500 in theory.  Essentially a model 1500 is the same as a 
model 1000 except for it came with all the options.  It was built pre 1998.  
The gears that you are seeing are the same as all of the modern aluminum rail 
model 1000.  They are fine pitch so the main gear of the modern machines will 
not work.

The headstock is not a stock model.  The slots do make an interesting idea.  On 
the early machines with no tilt the user would mill from the side to get a 
taper.  Something few people it think even try.

We do not have a copy of the manual for that machine and unfortunately neither 
does Legacy.  If anyone does, please pass it on to myself for legal copyrights 
and distribution.

Did I cover everything?

Tim

As far as the 

⁣Sent from BlueMail ​

On Jul 31, 2017, 12:16 PM, at 12:16 PM, 'joe biunno' via Legacy Ornamental 
Mills  wrote:
>just picked up this legacy and need assistance in identifying it...I
>looked 
>in the "history of ornamental mills", and it seems this is a 1500 (or 
>1500L?)...the photos show it is of the type with the 1 1/2" X 1 1/2", 
>square , steel tubing as a bed and "uni-strut P-1000" as the
>rails...can 
>anyone pinpoint the year or time frame this machine was made?...serial
># is 
>1656C...has some things that seem a bit odd to me, that if anyone could
>
>explain, would be appreciated(see follow up comments)...also looking
>for 
>the assembly manual/owner's manual, if anyone has that...certainly a 
>download would do...I will include other pictures and/or requests in
>follow 
>up posts...thanks...joe biunno
>
>-- 
>You received this message because you are subscribed to the Google
>Groups "Legacy Ornamental Mills" group.
>To unsubscribe from this group and stop receiving emails from it, send
>an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>To post to this group, send email to
>legacy-ornamental-mills@googlegroups.com.
>Visit this group at
>https://groups.google.com/group/legacy-ornamental-mills.
>For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

RE: new video on youtube, dust collection

[Russ Veinot]

Sorry, I gave the wrong link to the legacy video.  The right one is 
https://www.youtube.com/watch?v=cvtOb84CmRw 
 =12s 

 

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Russ Veinot
Sent: Monday, July 31, 2017 5:58 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: new video on youtube, dust collection

 

I just publish another video about dust collection improvements on my 1200 if 
interested  https://www.youtube.com/watch?v=ogy_c94Yt3o 
 =192s 

Comments are always welcome :>)

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

new video on youtube, dust collection

[Russ Veinot]

I just publish another video about dust collection improvements on my 1200 if 
interested  https://www.youtube.com/watch?v=ogy_c94Yt3o 
 =192s 

Comments are always welcome :>)

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: need help in identifying a 1500 (?)

['joe biunno' via Legacy Ornamental Mills]

the entire machine is steel...no aluminum whatsoever...and I actually saw 
some welds!...LOL!...on the leg units...center to center is 87" +/-...but 
other than the lead screw(and a support for it), lengthening this machine 
would seem to be easy as the 1 1/2" square tubing and the uni-strut are 
readily available in longer lengths


>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

RE: need help in identifying a 1500 (?)

[Russ Veinot]

Wow, I have never seen the 1500 up close.  Sure is different than my 1200.  Are 
those rails steel?

 

From: 'joe biunno' via Legacy Ornamental Mills 
[mailto:legacy-ornamental-mills@googlegroups.com] 
Sent: Monday, July 31, 2017 3:10 PM
To: Legacy Ornamental Mills
Subject: Re: need help in identifying a 1500 (?)

 

and now for some of the ugly!...seems the Y carriage was modified with a ball 
bearing concept...some oak was cut and attached to the underside of the 
carriage...a small bearing was set up on a round headed machine screw that then 
went into the oak...this provided front-to-back, ball bearing action, but 
nothing for the vertical, just the weight of the Y carriage onto the oak and 
thus onto the top of the steel rail, which I might think they perhaps used some 
dyna glide or other material to reduce the friction...what did legacy do 
here?...perhaps some Teflon "pads"?if so, were they adjustable so there 
would be little to no play in the carriage?...and adjustable for wear?...a 
photo of the original set up, as it came from legacy, would be very 
helpful...or the owner's manual would answer all of these 
questions...thanks...joe

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: need help in identifying a 1500 (?)

['joe biunno' via Legacy Ornamental Mills]

and now for some of the ugly!...seems the Y carriage was modified with a 
ball bearing concept...some oak was cut and attached to the underside of 
the carriage...a small bearing was set up on a round headed machine screw 
that then went into the oak...this provided front-to-back, ball bearing 
action, but nothing for the vertical, just the weight of the Y carriage 
onto the oak and thus onto the top of the steel rail, which I might think 
they perhaps used some dyna glide or other material to reduce the 
friction...what did legacy do here?...perhaps some Teflon "pads"?if so, 
were they adjustable so there would be little to no play in the 
carriage?...and adjustable for wear?...a photo of the original set up, as 
it came from legacy, would be very helpful...or the owner's manual would 
answer all of these questions...thanks...joe


>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: need help in identifying a 1500 (?)

['joe biunno' via Legacy Ornamental Mills]

i'll start with a photo of the tailstock...is this a legacy piece?...seems 
to fit too well to think that someone found a tailstock from a different 
machine and modified it to fit this legacy...number 2 morse taper...I might 
think the long slots in the base of the tailstock could accommodate some 
taper work?...but how it is made and finished suggests it is not a factory, 
legacy piece...again, I welcome any and all comments and 
explanations...thanks...joe


>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: early Legacy CNC unit on E-bay.

[Richard Ellis]

Roger
I do know I am a complete CNC (complete nut case ) but a Legacy  cnc in non 
caps is a no no no for me in any shape or form. Who to, and where in the 
U.K. could I sell anything it produces??
Having it as a toy,  would be a waste of time on the computer as that is 
what the two Legacy's that I have are 
Richard

On Friday, July 28, 2017 at 4:20:40 PM UTC+1, ITwoodwork wrote:
>
> ​Nice find Curtis
>
> Looking at it I think, from memory that it is a very early CNC up-grade. I 
> cannot see Rack & Pinion Drive which makes me suspect it is first 
> generation.
>
>
> Shame it is in the USA as Richard might have been keen to try CNC!!!
>
>
> Cheers
>
> Roger
>
>
> Sent from TouchMail for Windows 10 
>
> ​
>
>
> *From:* CURTIS GEORGE
> *Received:* 28/07/2017 16:15:54 +01:00
> *To:* Legacy-Ornamental-Mills
> Hello Everyone. 
> I know its vacation time for most of us. but here is some eye candy for 
> you guys who are thinking of making the jump into the CNC world. I honestly 
> do not know if this is a good deal. (electronics become old rather quickly 
> this unit might be to OLD for any real use???) But at the very least its 
> something to look at and ponder???  ;-)
> C.A.G.
>
>
>
> http://www.ebay.com/itm/Legacy-Woodworking-Ornamental-Router-Mill-Model-1200-CNC-with-computer-/152634030587?hash=item2389b279fb:g:DeMAAOSwIcdZc4eZ
>  
>
>
>- Business & Industrial 
>
>- >
>- Manufacturing & Metalworking 
>
>- >
>- Woodworking 
>- >
>- Equipment & Machinery 
>
>- >
>- Other Woodworking Equip 
>
>
>
>
>
>
>
>
> [image: 
> Legacy-Woodworking-Ornamental-Router-Mill-Model-1200-CNC-with-computer]
>
>
> *Mouse over to Zoom-Click to enlarge*
>
>
>
>- 
>[image: 
>Legacy-Woodworking-Ornamental-Router-Mill-Model-1200-CNC-with-computer]
>- 
>[image: 
>Legacy-Woodworking-Ornamental-Router-Mill-Model-1200-CNC-with-computer]
>- 
>[image: 
>Legacy-Woodworking-Ornamental-Router-Mill-Model-1200-CNC-with-computer]
>- 
>[image: 
>Legacy-Woodworking-Ornamental-Router-Mill-Model-1200-CNC-with-computer]
>- 
>[image: 
>Legacy-Woodworking-Ornamental-Router-Mill-Model-1200-CNC-with-computer]
>- 
>[image: 
>Legacy-Woodworking-Ornamental-Router-Mill-Model-1200-CNC-with-computer]
>- 
>[image: 
>Legacy-Woodworking-Ornamental-Router-Mill-Model-1200-CNC-with-computer]
>- 
>[image: 
>Legacy-Woodworking-Ornamental-Router-Mill-Model-1200-CNC-with-computer]
>- 
>[image: 
>Legacy-Woodworking-Ornamental-Router-Mill-Model-1200-CNC-with-computer]
>- 
>[image: 
>Legacy-Woodworking-Ornamental-Router-Mill-Model-1200-CNC-with-computer]
>- 
>[image: 
>Legacy-Woodworking-Ornamental-Router-Mill-Model-1200-CNC-with-computer]
>- 
>[image: 
>Legacy-Woodworking-Ornamental-Router-Mill-Model-1200-CNC-with-computer]
>
> *Have one to sell?* Sell now 
> 
> Legacy Woodworking Ornamental Router Mill Model 1200 CNC with computer
>
> [image: Popular] 1 viewed per hour
>
> Email to friendsShare on Facebook - opens in a new window or tab 
> Share
>  
> on Twitter - opens in a new window or tab 
> Share
>  
> on Pinterest - opens in a new window or tab 
> 
> | Add to watch list 
>