RE: Need help with Clamping systems and contour following setup

[Bill Bulkeley]

Hi welcome to the group not sure why anybody else hasn’t answered your email 
yet, i have an old video on template work using the woodchuck legacy mill it’s 
not the same mill as yours but the principle is the same will try and post a 
link to it. 
https://www.dropbox.com/s/su4ag2he31ruqr3/woodchuck%20training%20video%203%20contour%20duplicator.VOB?dl=0

 

It might work let me know again welcome

 

Bill 

 

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Turan Tekin
Sent: Tuesday, 17 April 2018 11:29 AM
To: Legacy Ornamental Mills
Subject: Need help with Clamping systems and contour following setup

 

Hi everyone!

 

I'm a new member here, thanks for letting me join the group. 

 

I'm a woodworking hobbyist in Atlanta, GA. I bought my LOM 15 years ago, set it 
up and moved to Europe before ever milling a single piece! I've just got it out 
of storage a few weeks ago and am anxious to get to work!

 

I have the 1000EX version (I think!?!) - no motor, just hand cranks. 

 

Apparently, I only partially finished setting it up and I have bags of parts 
for the horizontal and vertical clamps but no instructions on how to install 
them. 

 

I'm also interested in setting things up for contour following- I understand 
the premise of a pin following a template but can't seem to find any specifics 
on the setup or mounting systems. 

 

I'm a visual learner, so any images of your setups would be incredibly helpful. 

 

I'm looking forward to learning from you all and hope to have something to 
share soon. 

 

Thanks!

 

Turan 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

 


 

 

Virus-free.  

 www.avg.com 

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

RE: Need help with Clamping systems and contour following setup

[Bill Bulkeley]

https://www.dropbox.com/home/Public

try this one too it might work i always have trouble with this please anyone 
let me know if any of these links works the video goes for like 20 minuets

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Bill Bulkeley
Sent: Wednesday, 18 April 2018 7:43 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: Need help with Clamping systems and contour following setup

 

Hi welcome to the group not sure why anybody else hasn’t answered your email 
yet, i have an old video on template work using the woodchuck legacy mill it’s 
not the same mill as yours but the principle is the same will try and post a 
link to it. 
https://www.dropbox.com/s/su4ag2he31ruqr3/woodchuck%20training%20video%203%20contour%20duplicator.VOB?dl=0

 

It might work let me know again welcome

 

Bill 

 

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Turan Tekin
Sent: Tuesday, 17 April 2018 11:29 AM
To: Legacy Ornamental Mills
Subject: Need help with Clamping systems and contour following setup

 

Hi everyone!

 

I'm a new member here, thanks for letting me join the group. 

 

I'm a woodworking hobbyist in Atlanta, GA. I bought my LOM 15 years ago, set it 
up and moved to Europe before ever milling a single piece! I've just got it out 
of storage a few weeks ago and am anxious to get to work!

 

I have the 1000EX version (I think!?!) - no motor, just hand cranks. 

 

Apparently, I only partially finished setting it up and I have bags of parts 
for the horizontal and vertical clamps but no instructions on how to install 
them. 

 

I'm also interested in setting things up for contour following- I understand 
the premise of a pin following a template but can't seem to find any specifics 
on the setup or mounting systems. 

 

I'm a visual learner, so any images of your setups would be incredibly helpful. 

 

I'm looking forward to learning from you all and hope to have something to 
share soon. 

 

Thanks!

 

Turan 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

 


 

 

Virus-free.  

 www.avg.com 

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: legacy for sale dallas texas

[Dexter Bland]

I have purchased tools from this auction site before. Bidding does get 
crazy sometimes like any auction. You do have to consider the 15% they are 
going to add to your winning bid in what you are willing to pay. Have the 
money ready to send if you are the winner. They want payment sent right 
away. 
Although it is not an issue on this sale, Some places charge a 
non-negotiable loading fee. Sometimes the loading fee is as much as the 
item is worth. You really don't want to pay $50 to load something you won 
on a $120 bid and something you can bring a dolly and get all by yourself.
db

On Monday, April 16, 2018 at 3:09:01 AM UTC-5, Tim wrote:

> The reserve has been met at $500. The only thing that I see is missing 
> gears including the standard duplex and main gear and all the letter gears 
> except the one that is one the machine. I bet there is a box sitting around 
> that shop with them! There's a huge load of router bits that come with the 
> mill that is worth over $1000 alone. The router has the eliminator chuck so 
> that's ready to go. It looks like this could go really cheap relatively 
> speaking.
>
> Tim
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: Need help with Clamping systems and contour following setup

[Tekin Turan]

Thanks, Bill!

I’ll take a look when I get home- I really appreciate your help. 

> On Apr 17, 2018, at 5:54 PM, Bill Bulkeley  wrote:
> 
> https://www.dropbox.com/home/Public
> try this one too it might work i always have trouble with this please anyone 
> let me know if any of these links works the video goes for like 20 minuets
>  
> Bill
>  
> From: legacy-ornamental-mills@googlegroups.com 
> [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Bill Bulkeley
> Sent: Wednesday, 18 April 2018 7:43 AM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: RE: Need help with Clamping systems and contour following setup
>  
> Hi welcome to the group not sure why anybody else hasn’t answered your email 
> yet, i have an old video on template work using the woodchuck legacy mill 
> it’s not the same mill as yours but the principle is the same will try and 
> post a link to it. 
> https://www.dropbox.com/s/su4ag2he31ruqr3/woodchuck%20training%20video%203%20contour%20duplicator.VOB?dl=0
>  
> It might work let me know again welcome
>  
> Bill
>  
> From: legacy-ornamental-mills@googlegroups.com 
> [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Turan Tekin
> Sent: Tuesday, 17 April 2018 11:29 AM
> To: Legacy Ornamental Mills
> Subject: Need help with Clamping systems and contour following setup
>  
> Hi everyone!
>  
> I'm a new member here, thanks for letting me join the group. 
>  
> I'm a woodworking hobbyist in Atlanta, GA. I bought my LOM 15 years ago, set 
> it up and moved to Europe before ever milling a single piece! I've just got 
> it out of storage a few weeks ago and am anxious to get to work!
>  
> I have the 1000EX version (I think!?!) - no motor, just hand cranks. 
>  
> Apparently, I only partially finished setting it up and I have bags of parts 
> for the horizontal and vertical clamps but no instructions on how to install 
> them. 
>  
> I'm also interested in setting things up for contour following- I understand 
> the premise of a pin following a template but can't seem to find any 
> specifics on the setup or mounting systems. 
>  
> I'm a visual learner, so any images of your setups would be incredibly 
> helpful. 
>  
> I'm looking forward to learning from you all and hope to have something to 
> share soon. 
>  
> Thanks!
>  
> Turan 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
> Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/d/optout.
>  
> 
> Virus-free. www.avg.com
>  
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
> Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/d/optout.
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
> Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: Need help with Clamping systems and contour following setup

[Tim Krause]

Do you have the manual?  That should cover assembly of the horizontal and 
vertical clamps.

Are you planning on using the templates to turn something or for doing some 
flat work?  

Tim

PS. Welcome to the group.

On Apr 16, 2018, 6:28 PM, at 6:28 PM, Turan Tekin  wrote:
>Hi everyone!
>
>I'm a new member here, thanks for letting me join the group. 
>
>I'm a woodworking hobbyist in Atlanta, GA. I bought my LOM 15 years
>ago, 
>set it up and moved to Europe before ever milling a single piece! I've
>just 
>got it out of storage a few weeks ago and am anxious to get to work!
>
>I have the 1000EX version (I think!?!) - no motor, just hand cranks. 
>
>Apparently, I only partially finished setting it up and I have bags of 
>parts for the horizontal and vertical clamps but no instructions on how
>to 
>install them. 
>
>I'm also interested in setting things up for contour following- I 
>understand the premise of a pin following a template but can't seem to
>find 
>any specifics on the setup or mounting systems. 
>
>I'm a visual learner, so any images of your setups would be incredibly 
>helpful. 
>
>I'm looking forward to learning from you all and hope to have something
>to 
>share soon. 
>
>Thanks!
>
>Turan 
>
>-- 
>You received this message because you are subscribed to the Google
>Groups "Legacy Ornamental Mills" group.
>To unsubscribe from this group and stop receiving emails from it, send
>an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>To post to this group, send email to
>legacy-ornamental-mills@googlegroups.com.
>Visit this group at
>https://groups.google.com/group/legacy-ornamental-mills.
>For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: Need help with Clamping systems and contour following setup

[Tekin Turan]

Hi Tim-

Cannot find the manual. Is it available online somewhere you could point me?

For templates, my thought was to do round work like a copy lathe. A few of the 
posts I’ve read here lead me to believe that isn’t something the LOM is 
designed for. 

> On Apr 17, 2018, at 9:22 PM, Tim Krause  wrote:
> 
> Do you have the manual?  That should cover assembly of the horizontal and 
> vertical clamps.
> 
> Are you planning on using the templates to turn something or for doing some 
> flat work?  
> 
> Tim
> 
> PS. Welcome to the group.
>> On Apr 16, 2018, at 6:28 PM, Turan Tekin  wrote:
>> Hi everyone!
>> 
>> I'm a new member here, thanks for letting me join the group. 
>> 
>> I'm a woodworking hobbyist in Atlanta, GA. I bought my LOM 15 years ago, set 
>> it up and moved to Europe before ever milling a single piece! I've just got 
>> it out of storage a few weeks ago and am anxious to get to work!
>> 
>> I have the 1000EX version (I think!?!) - no motor, just hand cranks. 
>> 
>> Apparently, I only partially finished setting it up and I have bags of parts 
>> for the horizontal and vertical clamps but no instructions on how to install 
>> them. 
>> 
>> I'm also interested in setting things up for contour following- I understand 
>> the premise of a pin following a template but can't seem to find any 
>> specifics on the setup or mounting systems. 
>> 
>> I'm a visual learner, so any images of your setups would be incredibly 
>> helpful. 
>> 
>> I'm looking forward to learning from you all and hope to have something to 
>> share soon. 
>> 
>> Thanks!
>> 
>> Turan 
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
> Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: Need help with Clamping systems and contour following setup

[Harvey Matyas]

I don't know if this will help you.

https://groups.google.com/forum/#!msg/legacy-ornamental-mills/V9bvBJB7iJw/1NYRG2J8NQAJ;context-place=forum/legacy-ornamental-mills

Go to the user's group email and type manual in the search.

Harvey



On Tue, Apr 17, 2018 at 9:54 PM, Tekin Turan  wrote:

> Hi Tim-
>
> Cannot find the manual. Is it available online somewhere you could point
> me?
>
> For templates, my thought was to do round work like a copy lathe. A few of
> the posts I’ve read here lead me to believe that isn’t something the LOM is
> designed for.
>
> On Apr 17, 2018, at 9:22 PM, Tim Krause  wrote:
>
> Do you have the manual?  That should cover assembly of the horizontal and
> vertical clamps.
>
> Are you planning on using the templates to turn something or for doing
> some flat work?
>
> Tim
>
> PS. Welcome to the group.
> On Apr 16, 2018, at 6:28 PM, Turan Tekin  wrote:
>>
>> Hi everyone!
>>
>> I'm a new member here, thanks for letting me join the group.
>>
>> I'm a woodworking hobbyist in Atlanta, GA. I bought my LOM 15 years ago,
>> set it up and moved to Europe before ever milling a single piece! I've just
>> got it out of storage a few weeks ago and am anxious to get to work!
>>
>> I have the 1000EX version (I think!?!) - no motor, just hand cranks.
>>
>> Apparently, I only partially finished setting it up and I have bags of
>> parts for the horizontal and vertical clamps but no instructions on how to
>> install them.
>>
>> I'm also interested in setting things up for contour following- I
>> understand the premise of a pin following a template but can't seem to find
>> any specifics on the setup or mounting systems.
>>
>> I'm a visual learner, so any images of your setups would be incredibly
>> helpful.
>>
>> I'm looking forward to learning from you all and hope to have something
>> to share soon.
>>
>> Thanks!
>>
>> Turan
>>
>> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to legacy-ornamental-mills@
> googlegroups.com.
> Visit this group at https://groups.google.com/
> group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/d/optout.
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to legacy-ornamental-mills@
> googlegroups.com.
> Visit this group at https://groups.google.com/
> group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: Need help with Clamping systems and contour following setup

['Curt George' via Legacy Ornamental Mills]

Hello TekinThe key words here are designed for... The Legacy can do a lot, but 
there are somethings that is dose better then others. making your Legacy into a 
copy lathe of sorts would not be my first choice of projects, I would try 
starting a new.And starting with some basics first.
 Bill's video "Profile following" is a very good example of some of the 
possibility's that are open to you. but ... you will have to make and or modify 
your machine a little to do it.  Wait until you see the video for your self.
If you need any help putting your machine together, Just ask, I also own a 
1000ex. I know your model pretty well.
Have a good night.C.A.G. 

On Tuesday, April 17, 2018 10:54 PM, Tekin Turan  wrote:
 

 Hi Tim-
Cannot find the manual. Is it available online somewhere you could point me?
For templates, my thought was to do round work like a copy lathe. A few of the 
posts I’ve read here lead me to believe that isn’t something the LOM is 
designed for. 
On Apr 17, 2018, at 9:22 PM, Tim Krause  wrote:


Do you have the manual?  That should cover assembly of the horizontal and 
vertical clamps.

Are you planning on using the templates to turn something or for doing some 
flat work?  

Tim

PS. Welcome to the group.On Apr 16, 2018, at 6:28 PM, Turan Tekin 
 wrote:
Hi everyone!
I'm a new member here, thanks for letting me join the group. 
I'm a woodworking hobbyist in Atlanta, GA. I bought my LOM 15 years ago, set it 
up and moved to Europe before ever milling a single piece! I've just got it out 
of storage a few weeks ago and am anxious to get to work!
I have the 1000EX version (I think!?!) - no motor, just hand cranks. 
Apparently, I only partially finished setting it up and I have bags of parts 
for the horizontal and vertical clamps but no instructions on how to install 
them. 
I'm also interested in setting things up for contour following- I understand 
the premise of a pin following a template but can't seem to find any specifics 
on the setup or mounting systems. 
I'm a visual learner, so any images of your setups would be incredibly helpful. 
I'm looking forward to learning from you all and hope to have something to 
share soon. 
Thanks!
Turan 
-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.


   

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: Need help with Clamping systems and contour following setup

[Tim Krause]

Can you take a photo of your mill so I can get you the correct manual.  
Template turning does work, it just take practice.  There is very little 
documentation on the technique.  The video bill pointed out is a very good 
reference.

Tim

On Apr 17, 2018, 7:54 PM, at 7:54 PM, Tekin Turan  wrote:
>Hi Tim-
>
>Cannot find the manual. Is it available online somewhere you could
>point me?
>
>For templates, my thought was to do round work like a copy lathe. A few
>of the posts I’ve read here lead me to believe that isn’t something the
>LOM is designed for. 
>
>> On Apr 17, 2018, at 9:22 PM, Tim Krause 
>wrote:
>> 
>> Do you have the manual?  That should cover assembly of the horizontal
>and vertical clamps.
>> 
>> Are you planning on using the templates to turn something or for
>doing some flat work?  
>> 
>> Tim
>> 
>> PS. Welcome to the group.
>>> On Apr 16, 2018, at 6:28 PM, Turan Tekin  wrote:
>>> Hi everyone!
>>> 
>>> I'm a new member here, thanks for letting me join the group. 
>>> 
>>> I'm a woodworking hobbyist in Atlanta, GA. I bought my LOM 15 years
>ago, set it up and moved to Europe before ever milling a single piece!
>I've just got it out of storage a few weeks ago and am anxious to get
>to work!
>>> 
>>> I have the 1000EX version (I think!?!) - no motor, just hand cranks.
>
>>> 
>>> Apparently, I only partially finished setting it up and I have bags
>of parts for the horizontal and vertical clamps but no instructions on
>how to install them. 
>>> 
>>> I'm also interested in setting things up for contour following- I
>understand the premise of a pin following a template but can't seem to
>find any specifics on the setup or mounting systems. 
>>> 
>>> I'm a visual learner, so any images of your setups would be
>incredibly helpful. 
>>> 
>>> I'm looking forward to learning from you all and hope to have
>something to share soon. 
>>> 
>>> Thanks!
>>> 
>>> Turan 
>> 
>> -- 
>> You received this message because you are subscribed to the Google
>Groups "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it,
>send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>> To post to this group, send email to
>legacy-ornamental-mills@googlegroups.com.
>> Visit this group at
>https://groups.google.com/group/legacy-ornamental-mills.
>> For more options, visit https://groups.google.com/d/optout.
>
>-- 
>You received this message because you are subscribed to the Google
>Groups "Legacy Ornamental Mills" group.
>To unsubscribe from this group and stop receiving emails from it, send
>an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>To post to this group, send email to
>legacy-ornamental-mills@googlegroups.com.
>Visit this group at
>https://groups.google.com/group/legacy-ornamental-mills.
>For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.