Re: Legacy Design Kit

[M.W.Foscue]

Welcome Denis!

That helps ot avoid confusion.  LoL!
Thanks for joining into The Group.

What LOM do you have?

Mac
-Original Message-
From: 
Sent: Mar 26, 2023 8:47 PM
To: 
Subject: Re: Legacy Design Kit

My first name is Tim, but I'm good with people calling me by my second name, 
Denis, that's pronounced Den E. 
Take care 
Denis 
Hamilton Ontario Canada  


On Sun, Mar 19, 2023, 10:43 p.m. mailto:bulke...@mmnet.com.au)> wrote:
Obviously it will be Tim Kn 
 
Bill
 
From: legacy-ornamental-mills@googlegroups.com 
(mailto:legacy-ornamental-mills@googlegroups.com) 
mailto:legacy-ornamental-mills@googlegroups.com)> On Behalf Of M.W.Foscue
Sent: Monday, 20 March 2023 12:11 PM
To: legacy-ornamental-mills@googlegroups.com 
(mailto:legacy-ornamental-mills@googlegroups.com)
Subject: Re: Legacy Design Kit

 
Ok "Tims" - 
We need to get ya'll's "names" (what we are going to refer to you as) worked 
out sooner than later.
We started with Tim Krause (Tim K) - then added Tim Ziegler (Tim Z). 
Now that we have another Tim K (Knight) - we will depend upon ya'll to work out 
what Tim Knight
will be referred to as. (Tim K2?)
Mac



-Original Message-
From: mailto:legacy-ornamental-mills@googlegroups.com)>
Sent: Mar 19, 2023 8:06 PM
To: mailto:legacy-ornamental-mills@googlegroups.com)>
Subject: Re: Legacy Design Kit
 
Tim Z thanks for the welcome actually my name is also Tim Knight my wife and I 
share the google account we do a lot of crafts together so we use the same 
accounts to communicate with other so we dont over look each 
others orders when they come up. But Im the only one that uses 
the Legacy 1200. The account is under her name but I dont mine if you 
call me out as Kelly because I have seen a few Tims around on here. Just 
like my work we have 3 Tims there also better known as Tim 1, Tim 2 and 
Tim 3, Im know as Tim 1 since Ive been there the longest.

 
On Thu, Mar 16, 2023 at 6:01 AM Tim Ziegler mailto:timjzieg...@gmail.com)> wrote:

Hey Kelly welcome and thanks for stepping up to the plate to help those out.  

Kind Regards, 
 

Timothy J. Ziegler

Ziegler WoodWork  Specialty

14171 160th Ave. 
(https://www.google.com/maps/search/14171+160th+Ave.+Foreston+MN+56330?entry=gmailsource=g)

Foreston MN 56330 
(https://www.google.com/maps/search/14171+160th+Ave.+Foreston+MN+56330?entry=gmailsource=g)

 

320-294-5798 shop

320-630-2243 cell






 
 

On Wed, Mar 15, 2023 at 11:16 PM Kelly Knight mailto:tkms...@gmail.com)> wrote:


 

If someone has DWG or DXF files I can convert them into just about any format 
that is needed. I use AutoCAD just about every day. If anyone wants to send me 
the file to convert, be glad to help.

 
On Wed, Mar 15, 2023 at 6:54 AM Cole Andrews mailto:coleandrew...@gmail.com)> wrote:

i will make copies at work , dont have a scanner at home , be glad to
mail it to you.

On Tue, Mar 14, 2023 at 10:01 PM M.W.Foscue mailto:mwfos...@earthlink.net)> wrote:
>
> Cole,
>
> Do you happen to have a copy of the "3 - Router Bit Keys for easy 
> identification of the bits"?
>
> If so, are they something that can be emailed or snail-mailed?  If they are, 
> I'd like to work something out with you to get a copy.
>
> Thanks.
>
> Mac
>
> 
>
> -Original Message-
> From:  (mailto:legacy-ornamental-mills@googlegroups.com)>
> Sent: Mar 14, 2023 7:34 PM
> To:  (mailto:legacy-ornamental-mills@googlegroups.com)>
> Subject: Re: Legacy Design Kit
>
>
>
> Nat can email me so I can get his address.. mine is
> coleandrew...@gmail.com (mailto:coleandrew...@gmail.com)
>
> Sent from my iPhone
>
> On Mar 13, 2023, at 9:45 PM, bulke...@mmnet.com.au 
> (mailto:bulke...@mmnet.com.au) wrote:
>
> Your right mac there isnt anything about a piece of plexiglass I guess 
> thats why I dont know anything about it lol
>
>
>
> The other thing that the design kit doesnt have which need making is 
> templates for all the combination bits
>
> 
>
>
>
> 
>
>
>
> Bill
>
>
>
>
>
> From: legacy-ornamental-mills@googlegroups.com 
> (mailto:legacy-ornamental-mills@googlegroups.com) 
>  (mailto:legacy-ornamental-mills@googlegroups.com)> On Behalf Of M.W.Foscue
> Sent: Tuesday, 14 March 2023 11:59 AM
> To: legacy-ornamental-mills@googlegroups.com 
> (mailto:legacy-ornamental-mills@googlegroups.com)
> Subject: RE: Legacy Design Kit
>
>
>
> According to the below images of the Design Kit - it states "The Legacy 
> Design Kit consists of:
>
> and it lists the components.  Nowhere in that list is any mention of a "blank 
> sheet of plexiglas".
>
> I suspect it was something the earlier owner added/used(?) - but was not a 
> component of the kit when purchased new.
>
>
>
> Does anyon

Re: Legacy Design Kit

[Tim Ziegler]

That sounds good. Really starting to sound like the "Tim's" trump lol
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Sun, Mar 26, 2023 at 7:47 PM Tim Stevens  wrote:

> My first name is Tim, but I'm good with people calling me by my second
> name, Denis, that's pronounced Den E.
>
> Take care
> Denis
> Hamilton Ontario Canada 
>
> On Sun, Mar 19, 2023, 10:43 p.m.  wrote:
>
>> Obviously it will be Tim Kn
>>
>>
>>
>> Bill
>>
>>
>>
>> *From:* legacy-ornamental-mills@googlegroups.com <
>> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *M.W.Foscue
>> *Sent:* Monday, 20 March 2023 12:11 PM
>> *To:* legacy-ornamental-mills@googlegroups.com
>> *Subject:* Re: Legacy Design Kit
>>
>>
>>
>> Ok "Tims" -
>>
>> We need to get ya'll's "names" (what we are going to refer to you as)
>> worked out sooner than later.
>>
>> We started with Tim Krause (Tim K) - then added Tim Ziegler (Tim Z).
>>
>> Now that we have another Tim K (Knight) - we will depend upon ya'll to
>> work out what Tim Knight
>>
>> will be referred to as. (Tim K2?)
>>
>> Mac
>> --
>> --
>>
>> -Original Message-
>> From: 
>> Sent: Mar 19, 2023 8:06 PM
>> To: 
>> Subject: Re: Legacy Design Kit
>>
>>
>>
>> Tim Z thanks for the welcome actually my name is also Tim Knight my wife
>> and I share the google account we do a lot of crafts together so we use the
>> same accounts to communicate with other so we don’t over look each other’s
>> orders when they come up. But I’m the only one that uses the Legacy 1200.
>> The account is under her name but I don’t mine if you call me out as Kelly
>> because I have seen a few Tim’s around on here. Just like my work we have 3
>> Tim’s there also better known as Tim 1, Tim 2 and Tim 3, I’m know as Tim 1
>> since I’ve been there the longest.
>>
>>
>>
>> On Thu, Mar 16, 2023 at 6:01 AM Tim Ziegler 
>> wrote:
>>
>> Hey Kelly welcome and thanks for stepping up to the plate to help those
>> out.
>>
>>
>> Kind Regards,
>>
>>
>>
>> Timothy J. Ziegler
>>
>> Ziegler WoodWork & Specialty
>>
>> 14171 160th Ave.
>> <https://www.google.com/maps/search/14171+160th+Ave.+Foreston+MN+56330?entry=gmail=g>
>>
>> Foreston MN 56330
>> <https://www.google.com/maps/search/14171+160th+Ave.+Foreston+MN+56330?entry=gmail=g>
>>
>>
>>
>> 320-294-5798 shop
>>
>> 320-630-2243 cell
>>
>>
>>
>>
>>
>> On Wed, Mar 15, 2023 at 11:16 PM Kelly Knight  wrote:
>>
>>
>>
>> If someone has DWG or DXF files I can convert them into just about any
>> format that is needed. I use AutoCAD just about every day. If anyone wants
>> to send me the file to convert, be glad to help.
>>
>>
>>
>> On Wed, Mar 15, 2023 at 6:54 AM Cole Andrews 
>> wrote:
>>
>> i will make copies at work , dont have a scanner at home , be glad to
>> mail it to you.
>>
>> On Tue, Mar 14, 2023 at 10:01 PM M.W.Foscue 
>> wrote:
>> >
>> > Cole,
>> >
>> > Do you happen to have a copy of the "3 - Router Bit Keys for easy
>> identification of the bits"?
>> >
>> > If so, are they something that can be emailed or snail-mailed?  If they
>> are, I'd like to work something out with you to get a copy.
>> >
>> > Thanks.
>> >
>> > Mac
>> >
>> > 
>> >
>> > -Original Message-
>> > From: 
>> > Sent: Mar 14, 2023 7:34 PM
>> > To: 
>> > Subject: Re: Legacy Design Kit
>> >
>> >
>> >
>> > Nat can email me so I can get his address.. mine is
>> coleandrew...@gmail.com
>> >
>> > Sent from my iPhone
>> >
>> > On Mar 13, 2023, at 9:45 PM, bulke...@mmnet.com.au wrote:
>> >
>> > Your right mac there isn’t anything about a piece of plexiglass I guess
>> that’s why I don’t know anything about it lol
>> >
>> >
>> >
>> > The other thing that the design kit doesn’t have which need making is
>> templates for all the combination bits
>> >
>> > 
>> >
>> >
>> >
>> > 
>> >
&

Re: Legacy Design Kit

['Curt George' via Legacy Ornamental Mills]

 Welcome Tim/Denis To the Group.
Any and all ideas or questions are welcome here.  The ONLY dumb question is the 
one Not asked. We are all here to lean and share what we know, in the hope of 
becoming the best wood worker we can be. 
C.A.G.
On Sunday, March 26, 2023 at 08:47:38 PM EDT, Tim Stevens 
 wrote:  
 
 My first name is Tim, but I'm good with people calling me by my second name, 
Denis, that's pronounced Den E.
Take care Denis Hamilton Ontario Canada  
On Sun, Mar 19, 2023, 10:43 p.m.  wrote:


Obviously it will be Tim Kn 

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of M.W.Foscue
Sent: Monday, 20 March 2023 12:11 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Legacy Design Kit

 

Ok "Tims" - 

We need to get ya'll's "names" (what we are going to refer to you as) worked 
out sooner than later.

We started with Tim Krause (Tim K) - then added Tim Ziegler (Tim Z). 

Now that we have another Tim K (Knight) - we will depend upon ya'll to work out 
what Tim Knight

will be referred to as. (Tim K2?)

Mac

-Original Message-
From: 
Sent: Mar 19, 2023 8:06 PM
To: 
Subject: Re: Legacy Design Kit

 

Tim Z thanks for the welcome actually my name is also Tim Knight my wife and I 
share the google account we do a lot of crafts together so we use the same 
accounts to communicate with other so we don’t over look each other’s orders 
when they come up. But I’m the only one that uses the Legacy 1200. The account 
is under her name but I don’t mine if you call me out as Kelly because I have 
seen a few Tim’s around on here. Just like my work we have 3 Tim’s there also 
better known as Tim 1, Tim 2 and Tim 3, I’m know as Tim 1 since I’ve been there 
the longest.

 

On Thu, Mar 16, 2023 at 6:01 AM Tim Ziegler  wrote:


Hey Kelly welcome and thanks for stepping up to the plate to help those out.  




Kind Regards, 

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Wed, Mar 15, 2023 at 11:16 PM Kelly Knight  wrote:

 


If someone has DWG or DXF files I can convert them into just about any format 
that is needed. I use AutoCAD just about every day. If anyone wants to send me 
the file to convert, be glad to help.

 

On Wed, Mar 15, 2023 at 6:54 AM Cole Andrews  wrote:


i will make copies at work , dont have a scanner at home , be glad to
mail it to you.

On Tue, Mar 14, 2023 at 10:01 PM M.W.Foscue  wrote:
>
> Cole,
>
> Do you happen to have a copy of the "3 - Router Bit Keys for easy 
> identification of the bits"?
>
> If so, are they something that can be emailed or snail-mailed?  If they are, 
> I'd like to work something out with you to get a copy.
>
> Thanks.
>
> Mac
>
> 
>
> -Original Message-
> From: 
> Sent: Mar 14, 2023 7:34 PM
> To: 
> Subject: Re: Legacy Design Kit
>
>
>
> Nat can email me so I can get his address.. mine is    coleandrew...@gmail.com
>
> Sent from my iPhone
>
> On Mar 13, 2023, at 9:45 PM, bulke...@mmnet.com.au wrote:
>
> Your right mac there isn’t anything about a piece of plexiglass I guess 
> that’s why I don’t know anything about it lol
>
>
>
> The other thing that the design kit doesn’t have which need making is 
> templates for all the combination bits
>
> 
>
>
>
> 
>
>
>
> Bill
>
>
>
>
>
> From: legacy-ornamental-mills@googlegroups.com 
>  On Behalf Of M.W.Foscue
> Sent: Tuesday, 14 March 2023 11:59 AM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: RE: Legacy Design Kit
>
>
>
> According to the below images of the Design Kit - it states "The Legacy 
> Design Kit consists of:
>
> and it lists the components.  Nowhere in that list is any mention of a "blank 
> sheet of plexiglas".
>
> I suspect it was something the earlier owner added/used(?) - but was not a 
> component of the kit when purchased new.
>
>
>
> Does anyone have a copy of the "3 - Router Bit Keys for easy identification 
> of the bits"?
>
> A bought my Design Kit from someone in our Group - and it did not have them.
>
> I'd sure like to get a copy - if possible.
>
>
>
> The other question I have:
>
> Has anyone ever taken a Design Kit sheet (round, long rectangle, or both) to 
> a copy shop, like Staples, FedEx, etc. and had copies made?  If so, how'd 
> they turn out and what was the cost?
>
>
>
> Here's an early "Happy St Patrick's Day" wish to all of ya'll!!
>
> Mac
>
> 
> 
>
> -Original Message-
> From: 
> Sent: Mar 13, 2023 5:27 PM
> To: 
> Subject: RE: Legacy Design Kit
>
>
>
&

Re: Legacy Design Kit

[Tim Stevens]

My first name is Tim, but I'm good with people calling me by my second
name, Denis, that's pronounced Den E.

Take care
Denis
Hamilton Ontario Canada 

On Sun, Mar 19, 2023, 10:43 p.m.  wrote:

> Obviously it will be Tim Kn
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *M.W.Foscue
> *Sent:* Monday, 20 March 2023 12:11 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Legacy Design Kit
>
>
>
> Ok "Tims" -
>
> We need to get ya'll's "names" (what we are going to refer to you as)
> worked out sooner than later.
>
> We started with Tim Krause (Tim K) - then added Tim Ziegler (Tim Z).
>
> Now that we have another Tim K (Knight) - we will depend upon ya'll to
> work out what Tim Knight
>
> will be referred to as. (Tim K2?)
>
> Mac
> --
> ----------
>
> -Original Message-
> From: 
> Sent: Mar 19, 2023 8:06 PM
> To: 
> Subject: Re: Legacy Design Kit
>
>
>
> Tim Z thanks for the welcome actually my name is also Tim Knight my wife
> and I share the google account we do a lot of crafts together so we use the
> same accounts to communicate with other so we don’t over look each other’s
> orders when they come up. But I’m the only one that uses the Legacy 1200.
> The account is under her name but I don’t mine if you call me out as Kelly
> because I have seen a few Tim’s around on here. Just like my work we have 3
> Tim’s there also better known as Tim 1, Tim 2 and Tim 3, I’m know as Tim 1
> since I’ve been there the longest.
>
>
>
> On Thu, Mar 16, 2023 at 6:01 AM Tim Ziegler  wrote:
>
> Hey Kelly welcome and thanks for stepping up to the plate to help those
> out.
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
> <https://www.google.com/maps/search/14171+160th+Ave.+Foreston+MN+56330?entry=gmail=g>
>
> Foreston MN 56330
> <https://www.google.com/maps/search/14171+160th+Ave.+Foreston+MN+56330?entry=gmail=g>
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Wed, Mar 15, 2023 at 11:16 PM Kelly Knight  wrote:
>
>
>
> If someone has DWG or DXF files I can convert them into just about any
> format that is needed. I use AutoCAD just about every day. If anyone wants
> to send me the file to convert, be glad to help.
>
>
>
> On Wed, Mar 15, 2023 at 6:54 AM Cole Andrews 
> wrote:
>
> i will make copies at work , dont have a scanner at home , be glad to
> mail it to you.
>
> On Tue, Mar 14, 2023 at 10:01 PM M.W.Foscue 
> wrote:
> >
> > Cole,
> >
> > Do you happen to have a copy of the "3 - Router Bit Keys for easy
> identification of the bits"?
> >
> > If so, are they something that can be emailed or snail-mailed?  If they
> are, I'd like to work something out with you to get a copy.
> >
> > Thanks.
> >
> > Mac
> >
> > 
> >
> > -Original Message-
> > From: 
> > Sent: Mar 14, 2023 7:34 PM
> > To: 
> > Subject: Re: Legacy Design Kit
> >
> >
> >
> > Nat can email me so I can get his address.. mine is
> coleandrew...@gmail.com
> >
> > Sent from my iPhone
> >
> > On Mar 13, 2023, at 9:45 PM, bulke...@mmnet.com.au wrote:
> >
> > Your right mac there isn’t anything about a piece of plexiglass I guess
> that’s why I don’t know anything about it lol
> >
> >
> >
> > The other thing that the design kit doesn’t have which need making is
> templates for all the combination bits
> >
> > 
> >
> >
> >
> > 
> >
> >
> >
> > Bill
> >
> >
> >
> >
> >
> > From: legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> On Behalf Of M.W.Foscue
> > Sent: Tuesday, 14 March 2023 11:59 AM
> > To: legacy-ornamental-mills@googlegroups.com
> > Subject: RE: Legacy Design Kit
> >
> >
> >
> > According to the below images of the Design Kit - it states "The Legacy
> Design Kit consists of:
> >
> > and it lists the components.  Nowhere in that list is any mention of a
> "blank sheet of plexiglas".
> >
> > I suspect it was something the earlier owner added/used(?) - but was not
> a component of the kit when purchased new.
> >
> >
> >
> > Does anyone have a copy of the "3 - Router Bit Keys for easy
> iden

Re: Legacy Design Kit

[Tim Ziegler]

lol
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Sun, Mar 19, 2023 at 9:43 PM  wrote:

> Obviously it will be Tim Kn
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *M.W.Foscue
> *Sent:* Monday, 20 March 2023 12:11 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Legacy Design Kit
>
>
>
> Ok "Tims" -
>
> We need to get ya'll's "names" (what we are going to refer to you as)
> worked out sooner than later.
>
> We started with Tim Krause (Tim K) - then added Tim Ziegler (Tim Z).
>
> Now that we have another Tim K (Knight) - we will depend upon ya'll to
> work out what Tim Knight
>
> will be referred to as. (Tim K2?)
>
> Mac
> --
> ----------
>
> -Original Message-
> From: 
> Sent: Mar 19, 2023 8:06 PM
> To: 
> Subject: Re: Legacy Design Kit
>
>
>
> Tim Z thanks for the welcome actually my name is also Tim Knight my wife
> and I share the google account we do a lot of crafts together so we use the
> same accounts to communicate with other so we don’t over look each other’s
> orders when they come up. But I’m the only one that uses the Legacy 1200.
> The account is under her name but I don’t mine if you call me out as Kelly
> because I have seen a few Tim’s around on here. Just like my work we have 3
> Tim’s there also better known as Tim 1, Tim 2 and Tim 3, I’m know as Tim 1
> since I’ve been there the longest.
>
>
>
> On Thu, Mar 16, 2023 at 6:01 AM Tim Ziegler  wrote:
>
> Hey Kelly welcome and thanks for stepping up to the plate to help those
> out.
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
> <https://www.google.com/maps/search/14171+160th+Ave.+Foreston+MN+56330?entry=gmail=g>
>
> Foreston MN 56330
> <https://www.google.com/maps/search/14171+160th+Ave.+Foreston+MN+56330?entry=gmail=g>
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Wed, Mar 15, 2023 at 11:16 PM Kelly Knight  wrote:
>
>
>
> If someone has DWG or DXF files I can convert them into just about any
> format that is needed. I use AutoCAD just about every day. If anyone wants
> to send me the file to convert, be glad to help.
>
>
>
> On Wed, Mar 15, 2023 at 6:54 AM Cole Andrews 
> wrote:
>
> i will make copies at work , dont have a scanner at home , be glad to
> mail it to you.
>
> On Tue, Mar 14, 2023 at 10:01 PM M.W.Foscue 
> wrote:
> >
> > Cole,
> >
> > Do you happen to have a copy of the "3 - Router Bit Keys for easy
> identification of the bits"?
> >
> > If so, are they something that can be emailed or snail-mailed?  If they
> are, I'd like to work something out with you to get a copy.
> >
> > Thanks.
> >
> > Mac
> >
> > 
> >
> > -Original Message-
> > From: 
> > Sent: Mar 14, 2023 7:34 PM
> > To: 
> > Subject: Re: Legacy Design Kit
> >
> >
> >
> > Nat can email me so I can get his address.. mine is
> coleandrew...@gmail.com
> >
> > Sent from my iPhone
> >
> > On Mar 13, 2023, at 9:45 PM, bulke...@mmnet.com.au wrote:
> >
> > Your right mac there isn’t anything about a piece of plexiglass I guess
> that’s why I don’t know anything about it lol
> >
> >
> >
> > The other thing that the design kit doesn’t have which need making is
> templates for all the combination bits
> >
> > 
> >
> >
> >
> > 
> >
> >
> >
> > Bill
> >
> >
> >
> >
> >
> > From: legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> On Behalf Of M.W.Foscue
> > Sent: Tuesday, 14 March 2023 11:59 AM
> > To: legacy-ornamental-mills@googlegroups.com
> > Subject: RE: Legacy Design Kit
> >
> >
> >
> > According to the below images of the Design Kit - it states "The Legacy
> Design Kit consists of:
> >
> > and it lists the components.  Nowhere in that list is any mention of a
> "blank sheet of plexiglas".
> >
> > I suspect it was something the earlier owner added/used(?) - but was not
> a component of the kit when purchased new.
> >
> >
> >
> > Does anyone have a copy of the "3 - Router Bit Keys for easy
> identification

RE: Legacy Design Kit

[bulkeley]

Obviously it will be Tim Kn 

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of M.W.Foscue
Sent: Monday, 20 March 2023 12:11 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Legacy Design Kit

 

Ok "Tims" - 

We need to get ya'll's "names" (what we are going to refer to you as) worked 
out sooner than later.

We started with Tim Krause (Tim K) - then added Tim Ziegler (Tim Z). 

Now that we have another Tim K (Knight) - we will depend upon ya'll to work out 
what Tim Knight

will be referred to as. (Tim K2?)

Mac

  _  

  _  

-Original Message-
From: mailto:legacy-ornamental-mills@googlegroups.com> >
Sent: Mar 19, 2023 8:06 PM
To: mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: Re: Legacy Design Kit

 

Tim Z thanks for the welcome actually my name is also Tim Knight my wife and I 
share the google account we do a lot of crafts together so we use the same 
accounts to communicate with other so we don’t over look each other’s orders 
when they come up. But I’m the only one that uses the Legacy 1200. The account 
is under her name but I don’t mine if you call me out as Kelly because I have 
seen a few Tim’s around on here. Just like my work we have 3 Tim’s there also 
better known as Tim 1, Tim 2 and Tim 3, I’m know as Tim 1 since I’ve been there 
the longest.

 

On Thu, Mar 16, 2023 at 6:01 AM Tim Ziegler mailto:timjzieg...@gmail.com> > wrote:

Hey Kelly welcome and thanks for stepping up to the plate to help those out.  




Kind Regards, 

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave. 
<https://www.google.com/maps/search/14171+160th+Ave.+Foreston+MN+56330?entry=gmail=g>
 

Foreston MN 56330 
<https://www.google.com/maps/search/14171+160th+Ave.+Foreston+MN+56330?entry=gmail=g>
 

 

320-294-5798 shop

320-630-2243 cell

 

 

On Wed, Mar 15, 2023 at 11:16 PM Kelly Knight mailto:tkms...@gmail.com> > wrote:

 

If someone has DWG or DXF files I can convert them into just about any format 
that is needed. I use AutoCAD just about every day. If anyone wants to send me 
the file to convert, be glad to help.

 

On Wed, Mar 15, 2023 at 6:54 AM Cole Andrews mailto:coleandrew...@gmail.com> > wrote:

i will make copies at work , dont have a scanner at home , be glad to
mail it to you.

On Tue, Mar 14, 2023 at 10:01 PM M.W.Foscue mailto:mwfos...@earthlink.net> > wrote:
>
> Cole,
>
> Do you happen to have a copy of the "3 - Router Bit Keys for easy 
> identification of the bits"?
>
> If so, are they something that can be emailed or snail-mailed?  If they are, 
> I'd like to work something out with you to get a copy.
>
> Thanks.
>
> Mac
>
> 
>
> -Original Message-
> From:  <mailto:legacy-ornamental-mills@googlegroups.com> >
> Sent: Mar 14, 2023 7:34 PM
> To:  <mailto:legacy-ornamental-mills@googlegroups.com> >
> Subject: Re: Legacy Design Kit
>
>
>
> Nat can email me so I can get his address.. mine is
> coleandrew...@gmail.com <mailto:coleandrew...@gmail.com> 
>
> Sent from my iPhone
>
> On Mar 13, 2023, at 9:45 PM, bulke...@mmnet.com.au 
> <mailto:bulke...@mmnet.com.au>  wrote:
>
> Your right mac there isn’t anything about a piece of plexiglass I guess 
> that’s why I don’t know anything about it lol
>
>
>
> The other thing that the design kit doesn’t have which need making is 
> templates for all the combination bits
>
> 
>
>
>
> 
>
>
>
> Bill
>
>
>
>
>
> From: legacy-ornamental-mills@googlegroups.com 
> <mailto:legacy-ornamental-mills@googlegroups.com>  
>  <mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of M.W.Foscue
> Sent: Tuesday, 14 March 2023 11:59 AM
> To: legacy-ornamental-mills@googlegroups.com 
> <mailto:legacy-ornamental-mills@googlegroups.com> 
> Subject: RE: Legacy Design Kit
>
>
>
> According to the below images of the Design Kit - it states "The Legacy 
> Design Kit consists of:
>
> and it lists the components.  Nowhere in that list is any mention of a "blank 
> sheet of plexiglas".
>
> I suspect it was something the earlier owner added/used(?) - but was not a 
> component of the kit when purchased new.
>
>
>
> Does anyone have a copy of the "3 - Router Bit Keys for easy identification 
> of the bits"?
>
> A bought my Design Kit from someone in our Group - and it did not have them.
>
> I'd sure like to get a copy - if possible.
>
>
>
> The other question I have:
>
> Has anyone ever taken a Design Kit sheet (round, long rectangle, or both) to 
> a copy shop, like Staples, FedEx, etc. and had copies made?  If so, how'd 
> they turn out and 

Re: Legacy Design Kit

[Tim Ziegler]

Otherwise  perfect Mac.

And yes we are getting  more snow again Tuesday-Wednesday

On Sun, Mar 19, 2023, 8:40 PM M.W.Foscue  wrote:

> #1: TK (Krause)
>
> #2: TZ (Ziegler)
>
> #3: TK2 (Knight)
>
> Mac
> --
> --
>
> -Original Message-
> From: 
> Sent: Mar 19, 2023 9:19 PM
> To: 
> Subject: Re: Legacy Design Kit
>
>
> yup or through a middle initial in there, have to do something simple lol.
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> Foreston MN 56330
>
> 320-294-5798 shop
> 320-630-2243 cell
>
> On Sun, Mar 19, 2023 at 8:10 PM M.W.Foscue  wrote:
>
>> Ok "Tims" -
>>
>> We need to get ya'll's "names" (what we are going to refer to you as)
>> worked out sooner than later.
>>
>> We started with Tim Krause (Tim K) - then added Tim Ziegler (Tim Z).
>>
>> Now that we have another Tim K (Knight) - we will depend upon ya'll to
>> work out what Tim Knight
>>
>> will be referred to as. (Tim K2?)
>>
>> Mac
>> --
>> --
>>
>> -Original Message-
>> From: 
>> Sent: Mar 19, 2023 8:06 PM
>> To: 
>> Subject: Re: Legacy Design Kit
>>
>>
>> Tim Z thanks for the welcome actually my name is also Tim Knight my wife
>> and I share the google account we do a lot of crafts together so we use the
>> same accounts to communicate with other so we don’t over look each other’s
>> orders when they come up. But I’m the only one that uses the Legacy 1200.
>> The account is under her name but I don’t mine if you call me out as Kelly
>> because I have seen a few Tim’s around on here. Just like my work we have 3
>> Tim’s there also better known as Tim 1, Tim 2 and Tim 3, I’m know as Tim 1
>> since I’ve been there the longest.
>>
>> On Thu, Mar 16, 2023 at 6:01 AM Tim Ziegler 
>> wrote:
>>
>>> Hey Kelly welcome and thanks for stepping up to the plate to help those
>>> out.
>>>
>>> Kind Regards,
>>>
>>> Timothy J. Ziegler
>>> Ziegler WoodWork & Specialty
>>> 14171 160th Ave.
>>> <https://www.google.com/maps/search/14171+160th+Ave.+Foreston+MN+56330?entry=gmail=g>
>>> Foreston MN 56330
>>> <https://www.google.com/maps/search/14171+160th+Ave.+Foreston+MN+56330?entry=gmail=g>
>>>
>>> 320-294-5798 shop
>>> 320-630-2243 cell
>>>
>>>
>>> On Wed, Mar 15, 2023 at 11:16 PM Kelly Knight  wrote:
>>>
>>>
>>>> If someone has DWG or DXF files I can convert them into just about any
>>>> format that is needed. I use AutoCAD just about every day. If anyone wants
>>>> to send me the file to convert, be glad to help.
>>>>
>>>> On Wed, Mar 15, 2023 at 6:54 AM Cole Andrews 
>>>> wrote:
>>>>
>>>>> i will make copies at work , dont have a scanner at home , be glad to
>>>>> mail it to you.
>>>>>
>>>>> On Tue, Mar 14, 2023 at 10:01 PM M.W.Foscue 
>>>>> wrote:
>>>>> >
>>>>> > Cole,
>>>>> >
>>>>> > Do you happen to have a copy of the "3 - Router Bit Keys for easy
>>>>> identification of the bits"?
>>>>> >
>>>>> > If so, are they something that can be emailed or snail-mailed?  If
>>>>> they are, I'd like to work something out with you to get a copy.
>>>>> >
>>>>> > Thanks.
>>>>> >
>>>>> > Mac
>>>>> >
>>>>> > 
>>>>> >
>>>>> > -Original Message-
>>>>> > From: 
>>>>> > Sent: Mar 14, 2023 7:34 PM
>>>>> > To: 
>>>>> > Subject: Re: Legacy Design Kit
>>>>> >
>>>>> >
>>>>> >
>>>>> > Nat can email me so I can get his address.. mine is
>>>>> coleandrew...@gmail.com
>>>>> >
>>>>> > Sent from my iPhone
>>>>> >
>>>>> > On Mar 13, 2023, at 9:45 PM, bulke...@mmnet.com.au wrote:
>>>>> >
>>>>> > Your right mac there isn’t anything about a piece of plexiglass I
>>>>> guess that’s why I don’t know anything about it lol
>>>>> >
>>

Re: Legacy Design Kit

[Tim Ziegler]

Except there's at least  1-2 more Tim's  on the forum.  Lol

On Sun, Mar 19, 2023, 8:40 PM M.W.Foscue  wrote:

> #1: TK (Krause)
>
> #2: TZ (Ziegler)
>
> #3: TK2 (Knight)
>
> Mac
> --
> --
>
> -Original Message-
> From: 
> Sent: Mar 19, 2023 9:19 PM
> To: 
> Subject: Re: Legacy Design Kit
>
>
> yup or through a middle initial in there, have to do something simple lol.
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> Foreston MN 56330
>
> 320-294-5798 shop
> 320-630-2243 cell
>
> On Sun, Mar 19, 2023 at 8:10 PM M.W.Foscue  wrote:
>
>> Ok "Tims" -
>>
>> We need to get ya'll's "names" (what we are going to refer to you as)
>> worked out sooner than later.
>>
>> We started with Tim Krause (Tim K) - then added Tim Ziegler (Tim Z).
>>
>> Now that we have another Tim K (Knight) - we will depend upon ya'll to
>> work out what Tim Knight
>>
>> will be referred to as. (Tim K2?)
>>
>> Mac
>> --
>> --
>>
>> -Original Message-
>> From: 
>> Sent: Mar 19, 2023 8:06 PM
>> To: 
>> Subject: Re: Legacy Design Kit
>>
>>
>> Tim Z thanks for the welcome actually my name is also Tim Knight my wife
>> and I share the google account we do a lot of crafts together so we use the
>> same accounts to communicate with other so we don’t over look each other’s
>> orders when they come up. But I’m the only one that uses the Legacy 1200.
>> The account is under her name but I don’t mine if you call me out as Kelly
>> because I have seen a few Tim’s around on here. Just like my work we have 3
>> Tim’s there also better known as Tim 1, Tim 2 and Tim 3, I’m know as Tim 1
>> since I’ve been there the longest.
>>
>> On Thu, Mar 16, 2023 at 6:01 AM Tim Ziegler 
>> wrote:
>>
>>> Hey Kelly welcome and thanks for stepping up to the plate to help those
>>> out.
>>>
>>> Kind Regards,
>>>
>>> Timothy J. Ziegler
>>> Ziegler WoodWork & Specialty
>>> 14171 160th Ave.
>>> <https://www.google.com/maps/search/14171+160th+Ave.+Foreston+MN+56330?entry=gmail=g>
>>> Foreston MN 56330
>>> <https://www.google.com/maps/search/14171+160th+Ave.+Foreston+MN+56330?entry=gmail=g>
>>>
>>> 320-294-5798 shop
>>> 320-630-2243 cell
>>>
>>>
>>> On Wed, Mar 15, 2023 at 11:16 PM Kelly Knight  wrote:
>>>
>>>
>>>> If someone has DWG or DXF files I can convert them into just about any
>>>> format that is needed. I use AutoCAD just about every day. If anyone wants
>>>> to send me the file to convert, be glad to help.
>>>>
>>>> On Wed, Mar 15, 2023 at 6:54 AM Cole Andrews 
>>>> wrote:
>>>>
>>>>> i will make copies at work , dont have a scanner at home , be glad to
>>>>> mail it to you.
>>>>>
>>>>> On Tue, Mar 14, 2023 at 10:01 PM M.W.Foscue 
>>>>> wrote:
>>>>> >
>>>>> > Cole,
>>>>> >
>>>>> > Do you happen to have a copy of the "3 - Router Bit Keys for easy
>>>>> identification of the bits"?
>>>>> >
>>>>> > If so, are they something that can be emailed or snail-mailed?  If
>>>>> they are, I'd like to work something out with you to get a copy.
>>>>> >
>>>>> > Thanks.
>>>>> >
>>>>> > Mac
>>>>> >
>>>>> > 
>>>>> >
>>>>> > -Original Message-
>>>>> > From: 
>>>>> > Sent: Mar 14, 2023 7:34 PM
>>>>> > To: 
>>>>> > Subject: Re: Legacy Design Kit
>>>>> >
>>>>> >
>>>>> >
>>>>> > Nat can email me so I can get his address.. mine is
>>>>> coleandrew...@gmail.com
>>>>> >
>>>>> > Sent from my iPhone
>>>>> >
>>>>> > On Mar 13, 2023, at 9:45 PM, bulke...@mmnet.com.au wrote:
>>>>> >
>>>>> > Your right mac there isn’t anything about a piece of plexiglass I
>>>>> guess that’s why I don’t know anything about it lol
>>>>> >
>>>>> >
>>&

Re: Legacy Design Kit

[M.W.Foscue]

#1: TK (Krause)
#2: TZ (Ziegler)
#3: TK2 (Knight)
Mac
-Original Message-
From: 
Sent: Mar 19, 2023 9:19 PM
To: 
Subject: Re: Legacy Design Kit

yup or through a middle initial in there, have to do something simple lol. Kind 
Regards, 
Timothy J. Ziegler
Ziegler WoodWork  Specialty
14171 160th Ave.
Foreston MN 56330
 
320-294-5798 shop
320-630-2243 cell





On Sun, Mar 19, 2023 at 8:10 PM M.W.Foscue mailto:mwfos...@earthlink.net)> wrote:
Ok "Tims" -
We need to get ya'll's "names" (what we are going to refer to you as) worked 
out sooner than later.
We started with Tim Krause (Tim K) - then added Tim Ziegler (Tim Z). 
Now that we have another Tim K (Knight) - we will depend upon ya'll to work out 
what Tim Knight
will be referred to as. (Tim K2?)
Mac

-Original Message-
From: mailto:legacy-ornamental-mills@googlegroups.com)>
Sent: Mar 19, 2023 8:06 PM
To: mailto:legacy-ornamental-mills@googlegroups.com)>
Subject: Re: Legacy Design Kit

Tim Z thanks for the welcome actually my name is also Tim Knight my wife and I 
share the google account we do a lot of crafts together so we use the same 
accounts to communicate with other so we dont over look each 
others orders when they come up. But Im the only one that uses 
the Legacy 1200. The account is under her name but I dont mine if you 
call me out as Kelly because I have seen a few Tims around on here. Just 
like my work we have 3 Tims there also better known as Tim 1, Tim 2 and 
Tim 3, Im know as Tim 1 since Ive been there the longest.

On Thu, Mar 16, 2023 at 6:01 AM Tim Ziegler mailto:timjzieg...@gmail.com)> wrote:
Hey Kelly welcome and thanks for stepping up to the plate to help those out. 
Kind Regards, 
Timothy J. Ziegler
Ziegler WoodWork  Specialty
14171 160th Ave. 
(https://www.google.com/maps/search/14171+160th+Ave.+Foreston+MN+56330?entry=gmailsource=g)
Foreston MN 56330 
(https://www.google.com/maps/search/14171+160th+Ave.+Foreston+MN+56330?entry=gmailsource=g)
 
320-294-5798 shop
320-630-2243 cell






 
On Wed, Mar 15, 2023 at 11:16 PM Kelly Knight mailto:tkms...@gmail.com)> wrote:

 
If someone has DWG or DXF files I can convert them into just about any format 
that is needed. I use AutoCAD just about every day. If anyone wants to send me 
the file to convert, be glad to help.

On Wed, Mar 15, 2023 at 6:54 AM Cole Andrews mailto:coleandrew...@gmail.com)> wrote:
i will make copies at work , dont have a scanner at home , be glad to
mail it to you.

On Tue, Mar 14, 2023 at 10:01 PM M.W.Foscue mailto:mwfos...@earthlink.net)> wrote:
>
> Cole,
>
> Do you happen to have a copy of the "3 - Router Bit Keys for easy 
> identification of the bits"?
>
> If so, are they something that can be emailed or snail-mailed?  If they are, 
> I'd like to work something out with you to get a copy.
>
> Thanks.
>
> Mac
>
> 
>
> -Original Message-
> From:  (mailto:legacy-ornamental-mills@googlegroups.com)>
> Sent: Mar 14, 2023 7:34 PM
> To:  (mailto:legacy-ornamental-mills@googlegroups.com)>
> Subject: Re: Legacy Design Kit
>
>
>
> Nat can email me so I can get his address.. mine is
> coleandrew...@gmail.com (mailto:coleandrew...@gmail.com)
>
> Sent from my iPhone
>
> On Mar 13, 2023, at 9:45 PM, bulke...@mmnet.com.au 
> (mailto:bulke...@mmnet.com.au) wrote:
>
> Your right mac there isnt anything about a piece of plexiglass I guess 
> thats why I dont know anything about it lol
>
>
>
> The other thing that the design kit doesnt have which need making is 
> templates for all the combination bits
>
> 
>
>
>
> 
>
>
>
> Bill
>
>
>
>
>
> From: legacy-ornamental-mills@googlegroups.com 
> (mailto:legacy-ornamental-mills@googlegroups.com) 
>  (mailto:legacy-ornamental-mills@googlegroups.com)> On Behalf Of M.W.Foscue
> Sent: Tuesday, 14 March 2023 11:59 AM
> To: legacy-ornamental-mills@googlegroups.com 
> (mailto:legacy-ornamental-mills@googlegroups.com)
> Subject: RE: Legacy Design Kit
>
>
>
> According to the below images of the Design Kit - it states "The Legacy 
> Design Kit consists of:
>
> and it lists the components.  Nowhere in that list is any mention of a "blank 
> sheet of plexiglas".
>
> I suspect it was something the earlier owner added/used(?) - but was not a 
> component of the kit when purchased new.
>
>
>
> Does anyone have a copy of the "3 - Router Bit Keys for easy identification 
> of the bits"?
>
> A bought my Design Kit from someone in our Group - and it did not have them.
>
> I'd sure like to get a copy - if possible.
>
>
>
> The other question I have:
>
> Has anyone ever taken a Design Kit sheet (round, long rectangle, or both) to 
> a copy shop, like Staples

Re: Legacy Design Kit

[Tim Ziegler]

yup or through a middle initial in there, have to do something simple lol.
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Sun, Mar 19, 2023 at 8:10 PM M.W.Foscue  wrote:

> Ok "Tims" -
>
> We need to get ya'll's "names" (what we are going to refer to you as)
> worked out sooner than later.
>
> We started with Tim Krause (Tim K) - then added Tim Ziegler (Tim Z).
>
> Now that we have another Tim K (Knight) - we will depend upon ya'll to
> work out what Tim Knight
>
> will be referred to as. (Tim K2?)
>
> Mac
> --
> --
>
> -Original Message-
> From: 
> Sent: Mar 19, 2023 8:06 PM
> To: 
> Subject: Re: Legacy Design Kit
>
>
> Tim Z thanks for the welcome actually my name is also Tim Knight my wife
> and I share the google account we do a lot of crafts together so we use the
> same accounts to communicate with other so we don’t over look each other’s
> orders when they come up. But I’m the only one that uses the Legacy 1200.
> The account is under her name but I don’t mine if you call me out as Kelly
> because I have seen a few Tim’s around on here. Just like my work we have 3
> Tim’s there also better known as Tim 1, Tim 2 and Tim 3, I’m know as Tim 1
> since I’ve been there the longest.
>
> On Thu, Mar 16, 2023 at 6:01 AM Tim Ziegler  wrote:
>
>> Hey Kelly welcome and thanks for stepping up to the plate to help those
>> out.
>>
>> Kind Regards,
>>
>> Timothy J. Ziegler
>> Ziegler WoodWork & Specialty
>> 14171 160th Ave.
>> <https://www.google.com/maps/search/14171+160th+Ave.+Foreston+MN+56330?entry=gmail=g>
>> Foreston MN 56330
>> <https://www.google.com/maps/search/14171+160th+Ave.+Foreston+MN+56330?entry=gmail=g>
>>
>> 320-294-5798 shop
>> 320-630-2243 cell
>>
>>
>> On Wed, Mar 15, 2023 at 11:16 PM Kelly Knight  wrote:
>>
>>
>>> If someone has DWG or DXF files I can convert them into just about any
>>> format that is needed. I use AutoCAD just about every day. If anyone wants
>>> to send me the file to convert, be glad to help.
>>>
>>> On Wed, Mar 15, 2023 at 6:54 AM Cole Andrews 
>>> wrote:
>>>
>>>> i will make copies at work , dont have a scanner at home , be glad to
>>>> mail it to you.
>>>>
>>>> On Tue, Mar 14, 2023 at 10:01 PM M.W.Foscue 
>>>> wrote:
>>>> >
>>>> > Cole,
>>>> >
>>>> > Do you happen to have a copy of the "3 - Router Bit Keys for easy
>>>> identification of the bits"?
>>>> >
>>>> > If so, are they something that can be emailed or snail-mailed?  If
>>>> they are, I'd like to work something out with you to get a copy.
>>>> >
>>>> > Thanks.
>>>> >
>>>> > Mac
>>>> >
>>>> > 
>>>> >
>>>> > -Original Message-
>>>> > From: 
>>>> > Sent: Mar 14, 2023 7:34 PM
>>>> > To: 
>>>> > Subject: Re: Legacy Design Kit
>>>> >
>>>> >
>>>> >
>>>> > Nat can email me so I can get his address.. mine is
>>>> coleandrew...@gmail.com
>>>> >
>>>> > Sent from my iPhone
>>>> >
>>>> > On Mar 13, 2023, at 9:45 PM, bulke...@mmnet.com.au wrote:
>>>> >
>>>> > Your right mac there isn’t anything about a piece of plexiglass I
>>>> guess that’s why I don’t know anything about it lol
>>>> >
>>>> >
>>>> >
>>>> > The other thing that the design kit doesn’t have which need making is
>>>> templates for all the combination bits
>>>> >
>>>> > 
>>>> >
>>>> >
>>>> >
>>>> > 
>>>> >
>>>> >
>>>> >
>>>> > Bill
>>>> >
>>>> >
>>>> >
>>>> >
>>>> >
>>>> > From: legacy-ornamental-mills@googlegroups.com <
>>>> legacy-ornamental-mills@googlegroups.com> On Behalf Of M.W.Foscue
>>>> > Sent: Tuesday, 14 March 2023 11:59 AM
>>>> > To: legacy-ornamental-mills@googlegroups.com
>>>> > Subject: RE: Legacy Design Kit
>>>> >
>&g

Re: Legacy Design Kit

[M.W.Foscue]

Ok "Tims" - 
We need to get ya'll's "names" (what we are going to refer to you as) worked 
out sooner than later.
We started with Tim Krause (Tim K) - then added Tim Ziegler (Tim Z). 
Now that we have another Tim K (Knight) - we will depend upon ya'll to work out 
what Tim Knight
will be referred to as. (Tim K2?)
Mac
-Original Message-
From: 
Sent: Mar 19, 2023 8:06 PM
To: 
Subject: Re: Legacy Design Kit

Tim Z thanks for the welcome actually my name is also Tim Knight my wife and I 
share the google account we do a lot of crafts together so we use the same 
accounts to communicate with other so we dont over look each 
others orders when they come up. But Im the only one that uses 
the Legacy 1200. The account is under her name but I dont mine if you 
call me out as Kelly because I have seen a few Tims around on here. Just 
like my work we have 3 Tims there also better known as Tim 1, Tim 2 and 
Tim 3, Im know as Tim 1 since Ive been there the longest.

On Thu, Mar 16, 2023 at 6:01 AM Tim Ziegler mailto:timjzieg...@gmail.com)> wrote:
Hey Kelly welcome and thanks for stepping up to the plate to help those out. 
Kind Regards, 
Timothy J. Ziegler
Ziegler WoodWork  Specialty
14171 160th Ave. 
(https://www.google.com/maps/search/14171+160th+Ave.+Foreston+MN+56330?entry=gmailsource=g)
Foreston MN 56330 
(https://www.google.com/maps/search/14171+160th+Ave.+Foreston+MN+56330?entry=gmailsource=g)
 
320-294-5798 shop
320-630-2243 cell






 
On Wed, Mar 15, 2023 at 11:16 PM Kelly Knight mailto:tkms...@gmail.com)> wrote:

 
If someone has DWG or DXF files I can convert them into just about any format 
that is needed. I use AutoCAD just about every day. If anyone wants to send me 
the file to convert, be glad to help.

On Wed, Mar 15, 2023 at 6:54 AM Cole Andrews mailto:coleandrew...@gmail.com)> wrote:
i will make copies at work , dont have a scanner at home , be glad to
mail it to you.

On Tue, Mar 14, 2023 at 10:01 PM M.W.Foscue mailto:mwfos...@earthlink.net)> wrote:
>
> Cole,
>
> Do you happen to have a copy of the "3 - Router Bit Keys for easy 
> identification of the bits"?
>
> If so, are they something that can be emailed or snail-mailed?  If they are, 
> I'd like to work something out with you to get a copy.
>
> Thanks.
>
> Mac
>
> 
>
> -Original Message-
> From:  (mailto:legacy-ornamental-mills@googlegroups.com)>
> Sent: Mar 14, 2023 7:34 PM
> To:  (mailto:legacy-ornamental-mills@googlegroups.com)>
> Subject: Re: Legacy Design Kit
>
>
>
> Nat can email me so I can get his address.. mine is
> coleandrew...@gmail.com (mailto:coleandrew...@gmail.com)
>
> Sent from my iPhone
>
> On Mar 13, 2023, at 9:45 PM, bulke...@mmnet.com.au 
> (mailto:bulke...@mmnet.com.au) wrote:
>
> Your right mac there isnt anything about a piece of plexiglass I guess 
> thats why I dont know anything about it lol
>
>
>
> The other thing that the design kit doesnt have which need making is 
> templates for all the combination bits
>
> 
>
>
>
> 
>
>
>
> Bill
>
>
>
>
>
> From: legacy-ornamental-mills@googlegroups.com 
> (mailto:legacy-ornamental-mills@googlegroups.com) 
>  (mailto:legacy-ornamental-mills@googlegroups.com)> On Behalf Of M.W.Foscue
> Sent: Tuesday, 14 March 2023 11:59 AM
> To: legacy-ornamental-mills@googlegroups.com 
> (mailto:legacy-ornamental-mills@googlegroups.com)
> Subject: RE: Legacy Design Kit
>
>
>
> According to the below images of the Design Kit - it states "The Legacy 
> Design Kit consists of:
>
> and it lists the components.  Nowhere in that list is any mention of a "blank 
> sheet of plexiglas".
>
> I suspect it was something the earlier owner added/used(?) - but was not a 
> component of the kit when purchased new.
>
>
>
> Does anyone have a copy of the "3 - Router Bit Keys for easy identification 
> of the bits"?
>
> A bought my Design Kit from someone in our Group - and it did not have them.
>
> I'd sure like to get a copy - if possible.
>
>
>
> The other question I have:
>
> Has anyone ever taken a Design Kit sheet (round, long rectangle, or both) to 
> a copy shop, like Staples, FedEx, etc. and had copies made?  If so, how'd 
> they turn out and what was the cost?
>
>
>
> Here's an early "Happy St Patrick's Day" wish to all of ya'll!!
>
> Mac
>
> 
> 
>
> -Original Message-
> From:  (mailto:legacy-ornamental-mills@googlegroups.com)>
> Sent: Mar 13, 2023 5:27 PM
> To:  (mailto:legacy-ornamental-mills@googlegroups.com)>
> Subject: RE: Legacy Design Kit
>
>
>
> Thats great Cole Im

Re: Legacy Design Kit

[Tim Ziegler]

Hey Tim,

Yeah and we have some trouble with so many Tims.
Where I use to work we had about 4 of them too. I was TZ, then we had TS,
TH and I can't remember the other guys nick name.
1,2,3,4 would have been easier.
I have asked the Forum guys to at least use our last initial for that very
reason. lol
Well anyway welcome and hope to see some of your posts.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Sun, Mar 19, 2023 at 7:06 PM Kelly Knight  wrote:

> Tim Z thanks for the welcome actually my name is also Tim Knight my wife
> and I share the google account we do a lot of crafts together so we use the
> same accounts to communicate with other so we don’t over look each other’s
> orders when they come up. But I’m the only one that uses the Legacy 1200.
> The account is under her name but I don’t mine if you call me out as Kelly
> because I have seen a few Tim’s around on here. Just like my work we have 3
> Tim’s there also better known as Tim 1, Tim 2 and Tim 3, I’m know as Tim 1
> since I’ve been there the longest.
>
> On Thu, Mar 16, 2023 at 6:01 AM Tim Ziegler  wrote:
>
>> Hey Kelly welcome and thanks for stepping up to the plate to help those
>> out.
>>
>> Kind Regards,
>>
>> Timothy J. Ziegler
>> Ziegler WoodWork & Specialty
>> 14171 160th Ave.
>> <https://www.google.com/maps/search/14171+160th+Ave.+Foreston+MN+56330?entry=gmail=g>
>> Foreston MN 56330
>> <https://www.google.com/maps/search/14171+160th+Ave.+Foreston+MN+56330?entry=gmail=g>
>>
>> 320-294-5798 shop
>> 320-630-2243 cell
>>
>>
>> On Wed, Mar 15, 2023 at 11:16 PM Kelly Knight  wrote:
>>
>>> If someone has DWG or DXF files I can convert them into just about any
>>> format that is needed. I use AutoCAD just about every day. If anyone wants
>>> to send me the file to convert, be glad to help.
>>>
>>> On Wed, Mar 15, 2023 at 6:54 AM Cole Andrews 
>>> wrote:
>>>
>>>> i will make copies at work , dont have a scanner at home , be glad to
>>>> mail it to you.
>>>>
>>>> On Tue, Mar 14, 2023 at 10:01 PM M.W.Foscue 
>>>> wrote:
>>>> >
>>>> > Cole,
>>>> >
>>>> > Do you happen to have a copy of the "3 - Router Bit Keys for easy
>>>> identification of the bits"?
>>>> >
>>>> > If so, are they something that can be emailed or snail-mailed?  If
>>>> they are, I'd like to work something out with you to get a copy.
>>>> >
>>>> > Thanks.
>>>> >
>>>> > Mac
>>>> >
>>>> > 
>>>> >
>>>> > -----Original Message-
>>>> > From: 
>>>> > Sent: Mar 14, 2023 7:34 PM
>>>> > To: 
>>>> > Subject: Re: Legacy Design Kit
>>>> >
>>>> >
>>>> >
>>>> > Nat can email me so I can get his address.. mine is
>>>> coleandrew...@gmail.com
>>>> >
>>>> > Sent from my iPhone
>>>> >
>>>> > On Mar 13, 2023, at 9:45 PM, bulke...@mmnet.com.au wrote:
>>>> >
>>>> > Your right mac there isn’t anything about a piece of plexiglass I
>>>> guess that’s why I don’t know anything about it lol
>>>> >
>>>> >
>>>> >
>>>> > The other thing that the design kit doesn’t have which need making is
>>>> templates for all the combination bits
>>>> >
>>>> > 
>>>> >
>>>> >
>>>> >
>>>> > 
>>>> >
>>>> >
>>>> >
>>>> > Bill
>>>> >
>>>> >
>>>> >
>>>> >
>>>> >
>>>> > From: legacy-ornamental-mills@googlegroups.com <
>>>> legacy-ornamental-mills@googlegroups.com> On Behalf Of M.W.Foscue
>>>> > Sent: Tuesday, 14 March 2023 11:59 AM
>>>> > To: legacy-ornamental-mills@googlegroups.com
>>>> > Subject: RE: Legacy Design Kit
>>>> >
>>>> >
>>>> >
>>>> > According to the below images of the Design Kit - it states "The
>>>> Legacy Design Kit consists of:
>>>> >
>>>> > and it lists the components.  Nowhere in that list is any mention of
>>>> a "blank sheet of pl

Re: Legacy Design Kit

[Kelly Knight]

Tim Z thanks for the welcome actually my name is also Tim Knight my wife
and I share the google account we do a lot of crafts together so we use the
same accounts to communicate with other so we don’t over look each other’s
orders when they come up. But I’m the only one that uses the Legacy 1200.
The account is under her name but I don’t mine if you call me out as Kelly
because I have seen a few Tim’s around on here. Just like my work we have 3
Tim’s there also better known as Tim 1, Tim 2 and Tim 3, I’m know as Tim 1
since I’ve been there the longest.

On Thu, Mar 16, 2023 at 6:01 AM Tim Ziegler  wrote:

> Hey Kelly welcome and thanks for stepping up to the plate to help those
> out.
>
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> <https://www.google.com/maps/search/14171+160th+Ave.+Foreston+MN+56330?entry=gmail=g>
> Foreston MN 56330
> <https://www.google.com/maps/search/14171+160th+Ave.+Foreston+MN+56330?entry=gmail=g>
>
> 320-294-5798 shop
> 320-630-2243 cell
>
>
> On Wed, Mar 15, 2023 at 11:16 PM Kelly Knight  wrote:
>
>> If someone has DWG or DXF files I can convert them into just about any
>> format that is needed. I use AutoCAD just about every day. If anyone wants
>> to send me the file to convert, be glad to help.
>>
>> On Wed, Mar 15, 2023 at 6:54 AM Cole Andrews 
>> wrote:
>>
>>> i will make copies at work , dont have a scanner at home , be glad to
>>> mail it to you.
>>>
>>> On Tue, Mar 14, 2023 at 10:01 PM M.W.Foscue 
>>> wrote:
>>> >
>>> > Cole,
>>> >
>>> > Do you happen to have a copy of the "3 - Router Bit Keys for easy
>>> identification of the bits"?
>>> >
>>> > If so, are they something that can be emailed or snail-mailed?  If
>>> they are, I'd like to work something out with you to get a copy.
>>> >
>>> > Thanks.
>>> >
>>> > Mac
>>> >
>>> > 
>>> >
>>> > -Original Message-
>>> > From: 
>>> > Sent: Mar 14, 2023 7:34 PM
>>> > To: 
>>> > Subject: Re: Legacy Design Kit
>>> >
>>> >
>>> >
>>> > Nat can email me so I can get his address.. mine is
>>> coleandrew...@gmail.com
>>> >
>>> > Sent from my iPhone
>>> >
>>> > On Mar 13, 2023, at 9:45 PM, bulke...@mmnet.com.au wrote:
>>> >
>>> > Your right mac there isn’t anything about a piece of plexiglass I
>>> guess that’s why I don’t know anything about it lol
>>> >
>>> >
>>> >
>>> > The other thing that the design kit doesn’t have which need making is
>>> templates for all the combination bits
>>> >
>>> > 
>>> >
>>> >
>>> >
>>> > 
>>> >
>>> >
>>> >
>>> > Bill
>>> >
>>> >
>>> >
>>> >
>>> >
>>> > From: legacy-ornamental-mills@googlegroups.com <
>>> legacy-ornamental-mills@googlegroups.com> On Behalf Of M.W.Foscue
>>> > Sent: Tuesday, 14 March 2023 11:59 AM
>>> > To: legacy-ornamental-mills@googlegroups.com
>>> > Subject: RE: Legacy Design Kit
>>> >
>>> >
>>> >
>>> > According to the below images of the Design Kit - it states "The
>>> Legacy Design Kit consists of:
>>> >
>>> > and it lists the components.  Nowhere in that list is any mention of a
>>> "blank sheet of plexiglas".
>>> >
>>> > I suspect it was something the earlier owner added/used(?) - but was
>>> not a component of the kit when purchased new.
>>> >
>>> >
>>> >
>>> > Does anyone have a copy of the "3 - Router Bit Keys for easy
>>> identification of the bits"?
>>> >
>>> > A bought my Design Kit from someone in our Group - and it did not have
>>> them.
>>> >
>>> > I'd sure like to get a copy - if possible.
>>> >
>>> >
>>> >
>>> > The other question I have:
>>> >
>>> > Has anyone ever taken a Design Kit sheet (round, long rectangle, or
>>> both) to a copy shop, like Staples, FedEx, etc. and had copies made?  If
>>> so, how'd they turn out and what was the cost?
>>> >
>>> >
>>> >
>>> > Her

Re: Legacy Design Kit

[Tim Ziegler]

Very Good Jim, hats off to you for getting those made your self.
I appreciate your knowledge and motivation.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Sat, Mar 18, 2023 at 6:53 PM jrig...@gmail.com 
wrote:

> To All,
>
> Attached are some templates of the bits commonly used with the LOM.  I
> made them to fit on a 11"x8.5" piece of paper.  They are in PDF format with
> a ruler imbedded to validate the print size. When you print them be sure
> the 'scaling' in Adobe Reader is set to 'none'.
>
> We have a library in town that has a Laser engraver that is available to
> the public. I acquired some thin flexible plastic and took my drawings with
> the plastic and cut the templates.  We also have a plastics store in town
> and I got the plastic from their 'scrap' bin so the total cost was about
> $10.
>
> Enjoy,
>
> Jim
>
> On Sunday, March 12, 2023 at 12:06:01 AM UTC-6 Nathaniel Bacon wrote:
>
>> To all "Google Legacy Group" members:
>>
>> Included in a recent purchase was a box labeled "Design Kit".  The kit
>> only contained:
>> One large blank sheet of plexiglass
>> Three 50-page pads of 11" x 39" spindle layout graph paper
>> Two -- square pads of 13" round layout paper
>>
>> Missing were:
>> The three clear acrylic templates
>> The 12 sample designs
>> The "How-to-do" VHS Tape
>>
>> Question:
>> If I provide the large paper, would one of the members be willing to copy
>> the clear acrylic templates onto the paper?   From there I would make the
>> templates.
>>
>> Also, if I provide the large paper, would one of the members be willing
>> to copy the "sample Designs" onto the paper?  From there I would make the
>> templates.
>>
>> Lastly, would one of the members be willing to send me their VHS tape to
>> copy and return their VHS [image: Legacy Cover Page.png][image: Legacy
>> Design Kit - 1.png][image: Legacy Design Kit - 2.png]tape?
>>
>> A word Doc showing the Legacy "Design Kit" information in the Legacy
>> instruction manual is attached.
>>
>> Nat
>>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/7100e217-50a3-4ce4-b48f-25c90ad28552n%40googlegroups.com
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/7100e217-50a3-4ce4-b48f-25c90ad28552n%40googlegroups.com?utm_medium=email_source=footer>
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHnXh_SEHqA%2BG1WiTDhZr1Dn1x2A2w-b1uzYXuBgOKBLw%40mail.gmail.com.

Re: Legacy Design Kit

[jrig...@gmail.com]

To All,

Attached are some templates of the bits commonly used with the LOM.  I made 
them to fit on a 11"x8.5" piece of paper.  They are in PDF format with a 
ruler imbedded to validate the print size. When you print them be sure the 
'scaling' in Adobe Reader is set to 'none'.

We have a library in town that has a Laser engraver that is available to 
the public. I acquired some thin flexible plastic and took my drawings with 
the plastic and cut the templates.  We also have a plastics store in town 
and I got the plastic from their 'scrap' bin so the total cost was about 
$10.

Enjoy,

Jim

On Sunday, March 12, 2023 at 12:06:01 AM UTC-6 Nathaniel Bacon wrote:

> To all "Google Legacy Group" members:
>
> Included in a recent purchase was a box labeled "Design Kit".  The kit 
> only contained:
> One large blank sheet of plexiglass
> Three 50-page pads of 11" x 39" spindle layout graph paper
> Two -- square pads of 13" round layout paper
>
> Missing were:
> The three clear acrylic templates
> The 12 sample designs
> The "How-to-do" VHS Tape
>
> Question:
> If I provide the large paper, would one of the members be willing to copy 
> the clear acrylic templates onto the paper?   From there I would make the 
> templates.
>
> Also, if I provide the large paper, would one of the members be willing to 
> copy the "sample Designs" onto the paper?  From there I would make the 
> templates.
>
> Lastly, would one of the members be willing to send me their VHS tape to 
> copy and return their VHS [image: Legacy Cover Page.png][image: Legacy 
> Design Kit - 1.png][image: Legacy Design Kit - 2.png]tape?
>
> A word Doc showing the Legacy "Design Kit" information in the Legacy 
> instruction manual is attached.
>
> Nat
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/7100e217-50a3-4ce4-b48f-25c90ad28552n%40googlegroups.com.


Router Bit Profiles for Templates 5.pdf
Description: Adobe PDF document


Router Bit Profiles for Templates 4.pdf
Description: Adobe PDF document


Router Bit Profiles for Templates 1.pdf
Description: Adobe PDF document


Router Bit Profiles for Templates 2.pdf
Description: Adobe PDF document


Router Bit Profiles for Templates 3.pdf
Description: Adobe PDF document

Re: Legacy Design Kit

[Tim Ziegler]

Hey Kelly welcome and thanks for stepping up to the plate to help those
out.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Wed, Mar 15, 2023 at 11:16 PM Kelly Knight  wrote:

> If someone has DWG or DXF files I can convert them into just about any
> format that is needed. I use AutoCAD just about every day. If anyone wants
> to send me the file to convert, be glad to help.
>
> On Wed, Mar 15, 2023 at 6:54 AM Cole Andrews 
> wrote:
>
>> i will make copies at work , dont have a scanner at home , be glad to
>> mail it to you.
>>
>> On Tue, Mar 14, 2023 at 10:01 PM M.W.Foscue 
>> wrote:
>> >
>> > Cole,
>> >
>> > Do you happen to have a copy of the "3 - Router Bit Keys for easy
>> identification of the bits"?
>> >
>> > If so, are they something that can be emailed or snail-mailed?  If they
>> are, I'd like to work something out with you to get a copy.
>> >
>> > Thanks.
>> >
>> > Mac
>> >
>> > 
>> >
>> > -Original Message-
>> > From: 
>> > Sent: Mar 14, 2023 7:34 PM
>> > To: 
>> > Subject: Re: Legacy Design Kit
>> >
>> >
>> >
>> > Nat can email me so I can get his address.. mine is
>> coleandrew...@gmail.com
>> >
>> > Sent from my iPhone
>> >
>> > On Mar 13, 2023, at 9:45 PM, bulke...@mmnet.com.au wrote:
>> >
>> > Your right mac there isn’t anything about a piece of plexiglass I guess
>> that’s why I don’t know anything about it lol
>> >
>> >
>> >
>> > The other thing that the design kit doesn’t have which need making is
>> templates for all the combination bits
>> >
>> > 
>> >
>> >
>> >
>> > 
>> >
>> >
>> >
>> > Bill
>> >
>> >
>> >
>> >
>> >
>> > From: legacy-ornamental-mills@googlegroups.com <
>> legacy-ornamental-mills@googlegroups.com> On Behalf Of M.W.Foscue
>> > Sent: Tuesday, 14 March 2023 11:59 AM
>> > To: legacy-ornamental-mills@googlegroups.com
>> > Subject: RE: Legacy Design Kit
>> >
>> >
>> >
>> > According to the below images of the Design Kit - it states "The Legacy
>> Design Kit consists of:
>> >
>> > and it lists the components.  Nowhere in that list is any mention of a
>> "blank sheet of plexiglas".
>> >
>> > I suspect it was something the earlier owner added/used(?) - but was
>> not a component of the kit when purchased new.
>> >
>> >
>> >
>> > Does anyone have a copy of the "3 - Router Bit Keys for easy
>> identification of the bits"?
>> >
>> > A bought my Design Kit from someone in our Group - and it did not have
>> them.
>> >
>> > I'd sure like to get a copy - if possible.
>> >
>> >
>> >
>> > The other question I have:
>> >
>> > Has anyone ever taken a Design Kit sheet (round, long rectangle, or
>> both) to a copy shop, like Staples, FedEx, etc. and had copies made?  If
>> so, how'd they turn out and what was the cost?
>> >
>> >
>> >
>> > Here's an early "Happy St Patrick's Day" wish to all of ya'll!!
>> >
>> > Mac
>> >
>> > 
>> > 
>> >
>> > -Original Message-
>> > From: 
>> > Sent: Mar 13, 2023 5:27 PM
>> > To: 
>> > Subject: RE: Legacy Design Kit
>> >
>> >
>> >
>> > That’s great Cole I’m sure Nat will be contacting you soon ,you know I
>> still don’t know what the large blank sheet of plexiglass
>> >
>> > Is for, maybe its just to keep the paper from getting creases in it ???
>> >
>> >
>> >
>> > Bill
>> >
>> >
>> >
>> > From: legacy-ornamental-mills@googlegroups.com <
>> legacy-ornamental-mills@googlegroups.com> On Behalf Of Cole Andrews
>> > Sent: Tuesday, 14 March 2023 3:25 AM
>> > To: legacy-ornamental-mills@googlegroups.com
>> > Subject: Re: Legacy Design Kit
>> >
>> >
>> >
>> > I might have some extra templates , when I bought mine they sent extra
>> of some and none of the others , took awhile to get straight.
&

Re: Legacy Design Kit

[Kelly Knight]

If someone has DWG or DXF files I can convert them into just about any
format that is needed. I use AutoCAD just about every day. If anyone wants
to send me the file to convert, be glad to help.

On Wed, Mar 15, 2023 at 6:54 AM Cole Andrews 
wrote:

> i will make copies at work , dont have a scanner at home , be glad to
> mail it to you.
>
> On Tue, Mar 14, 2023 at 10:01 PM M.W.Foscue 
> wrote:
> >
> > Cole,
> >
> > Do you happen to have a copy of the "3 - Router Bit Keys for easy
> identification of the bits"?
> >
> > If so, are they something that can be emailed or snail-mailed?  If they
> are, I'd like to work something out with you to get a copy.
> >
> > Thanks.
> >
> > Mac
> >
> > 
> >
> > -Original Message-
> > From: 
> > Sent: Mar 14, 2023 7:34 PM
> > To: 
> > Subject: Re: Legacy Design Kit
> >
> >
> >
> > Nat can email me so I can get his address.. mine is
> coleandrew...@gmail.com
> >
> > Sent from my iPhone
> >
> > On Mar 13, 2023, at 9:45 PM, bulke...@mmnet.com.au wrote:
> >
> > Your right mac there isn’t anything about a piece of plexiglass I guess
> that’s why I don’t know anything about it lol
> >
> >
> >
> > The other thing that the design kit doesn’t have which need making is
> templates for all the combination bits
> >
> > 
> >
> >
> >
> > 
> >
> >
> >
> > Bill
> >
> >
> >
> >
> >
> > From: legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> On Behalf Of M.W.Foscue
> > Sent: Tuesday, 14 March 2023 11:59 AM
> > To: legacy-ornamental-mills@googlegroups.com
> > Subject: RE: Legacy Design Kit
> >
> >
> >
> > According to the below images of the Design Kit - it states "The Legacy
> Design Kit consists of:
> >
> > and it lists the components.  Nowhere in that list is any mention of a
> "blank sheet of plexiglas".
> >
> > I suspect it was something the earlier owner added/used(?) - but was not
> a component of the kit when purchased new.
> >
> >
> >
> > Does anyone have a copy of the "3 - Router Bit Keys for easy
> identification of the bits"?
> >
> > A bought my Design Kit from someone in our Group - and it did not have
> them.
> >
> > I'd sure like to get a copy - if possible.
> >
> >
> >
> > The other question I have:
> >
> > Has anyone ever taken a Design Kit sheet (round, long rectangle, or
> both) to a copy shop, like Staples, FedEx, etc. and had copies made?  If
> so, how'd they turn out and what was the cost?
> >
> >
> >
> > Here's an early "Happy St Patrick's Day" wish to all of ya'll!!
> >
> > Mac
> >
> > 
> > 
> >
> > -Original Message-
> > From: 
> > Sent: Mar 13, 2023 5:27 PM
> > To: 
> > Subject: RE: Legacy Design Kit
> >
> >
> >
> > That’s great Cole I’m sure Nat will be contacting you soon ,you know I
> still don’t know what the large blank sheet of plexiglass
> >
> > Is for, maybe its just to keep the paper from getting creases in it ???
> >
> >
> >
> > Bill
> >
> >
> >
> > From: legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> On Behalf Of Cole Andrews
> > Sent: Tuesday, 14 March 2023 3:25 AM
> > To: legacy-ornamental-mills@googlegroups.com
> > Subject: Re: Legacy Design Kit
> >
> >
> >
> > I might have some extra templates , when I bought mine they sent extra
> of some and none of the others , took awhile to get straight.
> >
> >
> >
> > On Sun, Mar 12, 2023 at 12:06 AM Nathaniel Bacon 
> wrote:
> >
> > To all "Google Legacy Group" members:
> >
> >
> >
> > Included in a recent purchase was a box labeled "Design Kit".  The kit
> only contained:
> >
> > One large blank sheet of plexiglass
> >
> > Three 50-page pads of 11" x 39" spindle layout graph paper
> >
> > Two -- square pads of 13" round layout paper
> >
> >
> >
> > Missing were:
> >
> > The three clear acrylic templates
> >
> > The 12 sample designs
> >
> > The "How-to-do" VHS Tape
> >
> >
> >
> > Question:
> >
> > If I provide the larg

Re: Legacy Design Kit

[jrig...@gmail.com]

Cole,
Would you email me a copy also?

Thank you,
Jim Riggen
jrigge...@gmail.com




On Wednesday, March 15, 2023 at 6:54:09 AM UTC-5 Cole Andrews wrote:

> i will make copies at work , dont have a scanner at home , be glad to
> mail it to you.
>
> On Tue, Mar 14, 2023 at 10:01 PM M.W.Foscue  wrote:
> >
> > Cole,
> >
> > Do you happen to have a copy of the "3 - Router Bit Keys for easy 
> identification of the bits"?
> >
> > If so, are they something that can be emailed or snail-mailed? If they 
> are, I'd like to work something out with you to get a copy.
> >
> > Thanks.
> >
> > Mac
> >
> > 
> >
> > -Original Message-
> > From: 
> > Sent: Mar 14, 2023 7:34 PM
> > To: 
> > Subject: Re: Legacy Design Kit
> >
> >
> >
> > Nat can email me so I can get his address.. mine is colean...@gmail.com
> >
> > Sent from my iPhone
> >
> > On Mar 13, 2023, at 9:45 PM, bulk...@mmnet.com.au wrote:
> >
> > Your right mac there isn’t anything about a piece of plexiglass I guess 
> that’s why I don’t know anything about it lol
> >
> >
> >
> > The other thing that the design kit doesn’t have which need making is 
> templates for all the combination bits
> >
> > 
> >
> >
> >
> > 
> >
> >
> >
> > Bill
> >
> >
> >
> >
> >
> > From: legacy-orna...@googlegroups.com  
> On Behalf Of M.W.Foscue
> > Sent: Tuesday, 14 March 2023 11:59 AM
> > To: legacy-orna...@googlegroups.com
> > Subject: RE: Legacy Design Kit
> >
> >
> >
> > According to the below images of the Design Kit - it states "The Legacy 
> Design Kit consists of:
> >
> > and it lists the components. Nowhere in that list is any mention of a 
> "blank sheet of plexiglas".
> >
> > I suspect it was something the earlier owner added/used(?) - but was not 
> a component of the kit when purchased new.
> >
> >
> >
> > Does anyone have a copy of the "3 - Router Bit Keys for easy 
> identification of the bits"?
> >
> > A bought my Design Kit from someone in our Group - and it did not have 
> them.
> >
> > I'd sure like to get a copy - if possible.
> >
> >
> >
> > The other question I have:
> >
> > Has anyone ever taken a Design Kit sheet (round, long rectangle, or 
> both) to a copy shop, like Staples, FedEx, etc. and had copies made? If so, 
> how'd they turn out and what was the cost?
> >
> >
> >
> > Here's an early "Happy St Patrick's Day" wish to all of ya'll!!
> >
> > Mac
> >
> > 
> > ____________
> >
> > -Original Message-
> > From: 
> > Sent: Mar 13, 2023 5:27 PM
> > To: 
> > Subject: RE: Legacy Design Kit
> >
> >
> >
> > That’s great Cole I’m sure Nat will be contacting you soon ,you know I 
> still don’t know what the large blank sheet of plexiglass
> >
> > Is for, maybe its just to keep the paper from getting creases in it ???
> >
> >
> >
> > Bill
> >
> >
> >
> > From: legacy-orna...@googlegroups.com  
> On Behalf Of Cole Andrews
> > Sent: Tuesday, 14 March 2023 3:25 AM
> > To: legacy-orna...@googlegroups.com
> > Subject: Re: Legacy Design Kit
> >
> >
> >
> > I might have some extra templates , when I bought mine they sent extra 
> of some and none of the others , took awhile to get straight.
> >
> >
> >
> > On Sun, Mar 12, 2023 at 12:06 AM Nathaniel Bacon  
> wrote:
> >
> > To all "Google Legacy Group" members:
> >
> >
> >
> > Included in a recent purchase was a box labeled "Design Kit". The kit 
> only contained:
> >
> > One large blank sheet of plexiglass
> >
> > Three 50-page pads of 11" x 39" spindle layout graph paper
> >
> > Two -- square pads of 13" round layout paper
> >
> >
> >
> > Missing were:
> >
> > The three clear acrylic templates
> >
> > The 12 sample designs
> >
> > The "How-to-do" VHS Tape
> >
> >
> >
> > Question:
> >
> > If I provide the large paper, would one of the members be willing to 
> copy the clear acrylic templates onto the paper? From there I would make 
> the templates.
> >
> >
> >
> > Also, if I provide the large paper, would on

Re: Legacy Design Kit

[Cole Andrews]

i will make copies at work , dont have a scanner at home , be glad to
mail it to you.

On Tue, Mar 14, 2023 at 10:01 PM M.W.Foscue  wrote:
>
> Cole,
>
> Do you happen to have a copy of the "3 - Router Bit Keys for easy 
> identification of the bits"?
>
> If so, are they something that can be emailed or snail-mailed?  If they are, 
> I'd like to work something out with you to get a copy.
>
> Thanks.
>
> Mac
>
> 
>
> -Original Message-
> From: 
> Sent: Mar 14, 2023 7:34 PM
> To: 
> Subject: Re: Legacy Design Kit
>
>
>
> Nat can email me so I can get his address.. mine iscoleandrew...@gmail.com
>
> Sent from my iPhone
>
> On Mar 13, 2023, at 9:45 PM, bulke...@mmnet.com.au wrote:
>
> Your right mac there isn’t anything about a piece of plexiglass I guess 
> that’s why I don’t know anything about it lol
>
>
>
> The other thing that the design kit doesn’t have which need making is 
> templates for all the combination bits
>
> 
>
>
>
> 
>
>
>
> Bill
>
>
>
>
>
> From: legacy-ornamental-mills@googlegroups.com 
>  On Behalf Of M.W.Foscue
> Sent: Tuesday, 14 March 2023 11:59 AM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: RE: Legacy Design Kit
>
>
>
> According to the below images of the Design Kit - it states "The Legacy 
> Design Kit consists of:
>
> and it lists the components.  Nowhere in that list is any mention of a "blank 
> sheet of plexiglas".
>
> I suspect it was something the earlier owner added/used(?) - but was not a 
> component of the kit when purchased new.
>
>
>
> Does anyone have a copy of the "3 - Router Bit Keys for easy identification 
> of the bits"?
>
> A bought my Design Kit from someone in our Group - and it did not have them.
>
> I'd sure like to get a copy - if possible.
>
>
>
> The other question I have:
>
> Has anyone ever taken a Design Kit sheet (round, long rectangle, or both) to 
> a copy shop, like Staples, FedEx, etc. and had copies made?  If so, how'd 
> they turn out and what was the cost?
>
>
>
> Here's an early "Happy St Patrick's Day" wish to all of ya'll!!
>
> Mac
>
> 
> 
>
> -Original Message-
> From: 
> Sent: Mar 13, 2023 5:27 PM
> To: 
> Subject: RE: Legacy Design Kit
>
>
>
> That’s great Cole I’m sure Nat will be contacting you soon ,you know I still 
> don’t know what the large blank sheet of plexiglass
>
> Is for, maybe its just to keep the paper from getting creases in it ???
>
>
>
> Bill
>
>
>
> From: legacy-ornamental-mills@googlegroups.com 
>  On Behalf Of Cole Andrews
> Sent: Tuesday, 14 March 2023 3:25 AM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: Re: Legacy Design Kit
>
>
>
> I might have some extra templates , when I bought mine they sent extra of 
> some and none of the others , took awhile to get straight.
>
>
>
> On Sun, Mar 12, 2023 at 12:06 AM Nathaniel Bacon  wrote:
>
> To all "Google Legacy Group" members:
>
>
>
> Included in a recent purchase was a box labeled "Design Kit".  The kit only 
> contained:
>
> One large blank sheet of plexiglass
>
> Three 50-page pads of 11" x 39" spindle layout graph paper
>
> Two -- square pads of 13" round layout paper
>
>
>
> Missing were:
>
> The three clear acrylic templates
>
> The 12 sample designs
>
> The "How-to-do" VHS Tape
>
>
>
> Question:
>
> If I provide the large paper, would one of the members be willing to copy the 
> clear acrylic templates onto the paper?   From there I would make the 
> templates.
>
>
>
> Also, if I provide the large paper, would one of the members be willing to 
> copy the "sample Designs" onto the paper?  From there I would make the 
> templates.
>
>
>
> Lastly, would one of the members be willing to send me their VHS tape to copy 
> and return their VHS
>
> 
> 
> 
>
> tape?
>
>
>
> A word Doc showing the Legacy "Design Kit" information in the Legacy 
> instruction manual is attached.
>
>
>
> Nat
>
> --
> You received this message because you are subscribed to the Google Groups 
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/legacy-ornamental-mills/d0c3de

Re: Legacy Design Kit

[Tim Ziegler]

I thought maybe the Archives ? no?

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Tue, Mar 14, 2023 at 10:28 PM  wrote:

> Not sure I don’t have them on computer I will look in my design kit pack
> and see whats there
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Wednesday, 15 March 2023 2:15 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Legacy Design Kit
>
>
>
> Mac that might already be posted somewhere, Bill
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Tue, Mar 14, 2023 at 10:01 PM M.W.Foscue 
> wrote:
>
> Cole,
>
> Do you happen to have a copy of the "3 - Router Bit Keys for easy
> identification of the bits"?
>
> If so, are they something that can be emailed or snail-mailed?  If they
> are, I'd like to work something out with you to get a copy.
>
> Thanks.
>
> Mac
> --
>
> -Original Message-
> From: 
> Sent: Mar 14, 2023 7:34 PM
> To: 
> Subject: Re: Legacy Design Kit
>
>
>
> Nat can email me so I can get his address.. mine is
> coleandrew...@gmail.com
>
> Sent from my iPhone
>
>
>
> On Mar 13, 2023, at 9:45 PM, bulke...@mmnet.com.au wrote:
>
> Your right mac there isn’t anything about a piece of plexiglass I guess
> that’s why I don’t know anything about it lol
>
>
>
> The other thing that the design kit doesn’t have which need making is
> templates for all the combination bits
>
> 
>
>
>
> 
>
>
>
> Bill
>
>
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *M.W.Foscue
> *Sent:* Tuesday, 14 March 2023 11:59 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* RE: Legacy Design Kit
>
>
>
> According to the below images of the Design Kit - it states "The Legacy
> Design Kit consists of:
>
> and it lists the components.  Nowhere in that list is any mention of a
> "blank sheet of plexiglas".
>
> I suspect it was something the earlier owner added/used(?) - but was not a
> component of the kit when purchased new.
>
>
>
> Does anyone have a copy of the "3 - Router Bit Keys for easy
> identification of the bits"?
>
> A bought my Design Kit from someone in our Group - and it did not have
> them.
>
> I'd sure like to get a copy - if possible.
>
>
>
> The other question I have:
>
> Has anyone ever taken a Design Kit sheet (round, long rectangle, or both)
> to a copy shop, like Staples, FedEx, etc. and had copies made?  If so,
> how'd they turn out and what was the cost?
>
>
>
> Here's an early "Happy St Patrick's Day" wish to all of ya'll!!
>
> Mac
> --
> --
>
> -Original Message-
> From: 
> Sent: Mar 13, 2023 5:27 PM
> To: 
> Subject: RE: Legacy Design Kit
>
>
>
> That’s great Cole I’m sure Nat will be contacting you soon ,you know I
> still don’t know what the large blank sheet of plexiglass
>
> Is for, maybe its just to keep the paper from getting creases in it ???
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Cole Andrews
> *Sent:* Tuesday, 14 March 2023 3:25 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Legacy Design Kit
>
>
>
> I might have some extra templates , when I bought mine they sent extra of
> some and none of the others , took awhile to get straight.
>
>
>
> On Sun, Mar 12, 2023 at 12:06 AM Nathaniel Bacon 
> wrote:
>
> To all "Google Legacy Group" members:
>
>
>
> Included in a recent purchase was a box labeled "Design Kit".  The kit
> only contained:
>
> One large blank sheet of plexiglass
>
> Three 50-page pads of 11" x 39" spindle layout graph paper
>
> Two -- square pads of 13" round layout paper
>
>
>
> Missing were:
>
> The three clear acrylic templates
>
> The 12 sample designs
>
> The "How-to-do" VHS Tape
>
>
>
> Question:
>
> If I provide the large paper, would one of the members be willing to copy
> the clear acrylic templat

RE: Legacy Design Kit

[bulkeley]

Not sure I don’t have them on computer I will look in my design kit pack and 
see whats there

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Wednesday, 15 March 2023 2:15 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Legacy Design Kit

 

Mac that might already be posted somewhere, Bill


Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Tue, Mar 14, 2023 at 10:01 PM M.W.Foscue mailto:mwfos...@earthlink.net> > wrote:

Cole,

Do you happen to have a copy of the "3 - Router Bit Keys for easy 
identification of the bits"?

If so, are they something that can be emailed or snail-mailed?  If they are, 
I'd like to work something out with you to get a copy.

Thanks.

Mac


  _  


-Original Message-
From: mailto:legacy-ornamental-mills@googlegroups.com> >
Sent: Mar 14, 2023 7:34 PM
To: mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: Re: Legacy Design Kit

 

Nat can email me so I can get his address.. mine iscoleandrew...@gmail.com 
<mailto:coleandrew...@gmail.com> 

Sent from my iPhone

 

On Mar 13, 2023, at 9:45 PM, bulke...@mmnet.com.au 
<mailto:bulke...@mmnet.com.au>  wrote:

Your right mac there isn’t anything about a piece of plexiglass I guess that’s 
why I don’t know anything about it lol

 

The other thing that the design kit doesn’t have which need making is templates 
for all the combination bits 



 



 

Bill

 

 

From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of M.W.Foscue
Sent: Tuesday, 14 March 2023 11:59 AM
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com> 
Subject: RE: Legacy Design Kit

 

According to the below images of the Design Kit - it states "The Legacy Design 
Kit consists of:

and it lists the components.  Nowhere in that list is any mention of a "blank 
sheet of plexiglas".

I suspect it was something the earlier owner added/used(?) - but was not a 
component of the kit when purchased new.

 

Does anyone have a copy of the "3 - Router Bit Keys for easy identification of 
the bits"?

A bought my Design Kit from someone in our Group - and it did not have them.

I'd sure like to get a copy - if possible.

 

The other question I have: 

Has anyone ever taken a Design Kit sheet (round, long rectangle, or both) to a 
copy shop, like Staples, FedEx, etc. and had copies made?  If so, how'd they 
turn out and what was the cost?

 

Here's an early "Happy St Patrick's Day" wish to all of ya'll!!

Mac

  _  

  _  

-Original Message-
From: mailto:legacy-ornamental-mills@googlegroups.com> >
Sent: Mar 13, 2023 5:27 PM
To: mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: RE: Legacy Design Kit

 

That’s great Cole I’m sure Nat will be contacting you soon ,you know I still 
don’t know what the large blank sheet of plexiglass

Is for, maybe its just to keep the paper from getting creases in it ???

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Cole Andrews
Sent: Tuesday, 14 March 2023 3:25 AM
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com> 
Subject: Re: Legacy Design Kit

 

I might have some extra templates , when I bought mine they sent extra of some 
and none of the others , took awhile to get straight.

 

On Sun, Mar 12, 2023 at 12:06 AM Nathaniel Bacon mailto:natbac...@gmail.com> > wrote:

To all "Google Legacy Group" members:

 

Included in a recent purchase was a box labeled "Design Kit".  The kit only 
contained:

One large blank sheet of plexiglass

Three 50-page pads of 11" x 39" spindle layout graph paper

Two -- square pads of 13" round layout paper

 

Missing were:

The three clear acrylic templates

The 12 sample designs

The "How-to-do" VHS Tape

 

Question:

If I provide the large paper, would one of the members be willing to copy the 
clear acrylic templates onto the paper?   From there I would make the templates.

 

Also, if I provide the large paper, would one of the members be willing to copy 
the "sample Designs" onto the paper?  From there I would make the templates.

 

Lastly, would one of the members be willing to send me their VHS tape to copy 
and return their VHS







tape?

 

A word Doc showing the Legacy "Design Kit" information in the Legacy 
instruction manual is attached.

 

Nat

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
T

Re: Legacy Design Kit

[Tim Ziegler]

Mac that might already be posted somewhere, Bill
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Tue, Mar 14, 2023 at 10:01 PM M.W.Foscue  wrote:

> Cole,
>
> Do you happen to have a copy of the "3 - Router Bit Keys for easy
> identification of the bits"?
>
> If so, are they something that can be emailed or snail-mailed?  If they
> are, I'd like to work something out with you to get a copy.
>
> Thanks.
>
> Mac
> --
>
> -Original Message-
> From: 
> Sent: Mar 14, 2023 7:34 PM
> To: 
> Subject: Re: Legacy Design Kit
>
>
> Nat can email me so I can get his address.. mine is
> coleandrew...@gmail.com
>
> Sent from my iPhone
>
> On Mar 13, 2023, at 9:45 PM, bulke...@mmnet.com.au wrote:
>
> Your right mac there isn’t anything about a piece of plexiglass I guess
> that’s why I don’t know anything about it lol
>
>
>
> The other thing that the design kit doesn’t have which need making is
> templates for all the combination bits
> 
>
>
> 
>
>
>
> Bill
>
>
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *M.W.Foscue
> *Sent:* Tuesday, 14 March 2023 11:59 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* RE: Legacy Design Kit
>
>
>
> According to the below images of the Design Kit - it states "The Legacy
> Design Kit consists of:
>
> and it lists the components.  Nowhere in that list is any mention of a
> "blank sheet of plexiglas".
>
> I suspect it was something the earlier owner added/used(?) - but was not a
> component of the kit when purchased new.
>
>
>
> Does anyone have a copy of the "3 - Router Bit Keys for easy
> identification of the bits"?
>
> A bought my Design Kit from someone in our Group - and it did not have
> them.
>
> I'd sure like to get a copy - if possible.
>
>
>
> The other question I have:
>
> Has anyone ever taken a Design Kit sheet (round, long rectangle, or both)
> to a copy shop, like Staples, FedEx, etc. and had copies made?  If so,
> how'd they turn out and what was the cost?
>
>
>
> Here's an early "Happy St Patrick's Day" wish to all of ya'll!!
>
> Mac
> --
> --
>
> -Original Message-
> From: 
> Sent: Mar 13, 2023 5:27 PM
> To: 
> Subject: RE: Legacy Design Kit
>
>
>
> That’s great Cole I’m sure Nat will be contacting you soon ,you know I
> still don’t know what the large blank sheet of plexiglass
>
> Is for, maybe its just to keep the paper from getting creases in it ???
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Cole Andrews
> *Sent:* Tuesday, 14 March 2023 3:25 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Legacy Design Kit
>
>
>
> I might have some extra templates , when I bought mine they sent extra of
> some and none of the others , took awhile to get straight.
>
>
>
> On Sun, Mar 12, 2023 at 12:06 AM Nathaniel Bacon 
> wrote:
>
> To all "Google Legacy Group" members:
>
>
>
> Included in a recent purchase was a box labeled "Design Kit".  The kit
> only contained:
>
> One large blank sheet of plexiglass
>
> Three 50-page pads of 11" x 39" spindle layout graph paper
>
> Two -- square pads of 13" round layout paper
>
>
>
> Missing were:
>
> The three clear acrylic templates
>
> The 12 sample designs
>
> The "How-to-do" VHS Tape
>
>
>
> Question:
>
> If I provide the large paper, would one of the members be willing to copy
> the clear acrylic templates onto the paper?   From there I would make the
> templates.
>
>
>
> Also, if I provide the large paper, would one of the members be willing to
> copy the "sample Designs" onto the paper?  From there I would make the
> templates.
>
>
>
> Lastly, would one of the members be willing to send me their VHS tape to
> copy and return their VHS
> 
> 
> 
>
> tape?
>
>
>
> A word Doc showing the Legacy "Design Kit" information in the Legacy
> instruction manual is attached.
>
>
>
> Nat
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send 

Re: Legacy Design Kit

[M.W.Foscue]

Cole,
Do you happen to have a copy of the "3 - Router Bit Keys for easy 
identification of the bits"?
If so, are they something that can be emailed or snail-mailed?  If they are, 
I'd like to work something out with you to get a copy.
Thanks.
Mac
-Original Message-
From: 
Sent: Mar 14, 2023 7:34 PM
To: 
Subject: Re: Legacy Design Kit

Nat can email me so I can get his address.. mine iscoleandrew...@gmail.com

Sent from my iPhone

On Mar 13, 2023, at 9:45 PM, bulke...@mmnet.com.au wrote:


Your right mac there isnt anything about a piece of plexiglass I guess 
thats why I dont know anything about it lol
 
The other thing that the design kit doesnt have which need making is 
templates for all the combination bits 

 

 
Bill
 
 
From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of M.W.Foscue
Sent: Tuesday, 14 March 2023 11:59 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: Legacy Design Kit


According to the below images of the Design Kit - it states "The Legacy Design 
Kit consists of:
and it lists the components.  Nowhere in that list is any mention of a "blank 
sheet of plexiglas".
I suspect it was something the earlier owner added/used(?) - but was not a 
component of the kit when purchased new.
 
Does anyone have a copy of the "3 - Router Bit Keys for easy identification of 
the bits"?
A bought my Design Kit from someone in our Group - and it did not have them.
I'd sure like to get a copy - if possible.
 
The other question I have: 
Has anyone ever taken a Design Kit sheet (round, long rectangle, or both) to a 
copy shop, like Staples, FedEx, etc. and had copies made?  If so, how'd they 
turn out and what was the cost?
 
Here's an early "Happy St Patrick's Day" wish to all of ya'll!!
Mac



-Original Message-
From: mailto:legacy-ornamental-mills@googlegroups.com)>
Sent: Mar 13, 2023 5:27 PM
To: mailto:legacy-ornamental-mills@googlegroups.com)>
Subject: RE: Legacy Design Kit

Thats great Cole Im sure Nat will be contacting you soon ,you 
know I still dont know what the large blank sheet of plexiglass
Is for, maybe its just to keep the paper from getting creases in it ???
 
Bill
 
From: legacy-ornamental-mills@googlegroups.com 
(mailto:legacy-ornamental-mills@googlegroups.com) 
mailto:legacy-ornamental-mills@googlegroups.com)> On Behalf Of Cole Andrews
Sent: Tuesday, 14 March 2023 3:25 AM
To: legacy-ornamental-mills@googlegroups.com 
(mailto:legacy-ornamental-mills@googlegroups.com)
Subject: Re: Legacy Design Kit


I might have some extra templates , when I bought mine they sent extra of some 
and none of the others , took awhile to get straight.


On Sun, Mar 12, 2023 at 12:06 AM Nathaniel Bacon mailto:natbac...@gmail.com)> wrote:

To all "Google Legacy Group" members:



Included in a recent purchase was a box labeled "Design Kit".  The kit only 
contained:
One large blank sheet of plexiglass

Three 50-page pads of 11" x 39" spindle layout graph paper
Two -- square pads of 13" round layout paper



Missing were:

The three clear acrylic templates

The 12 sample designs

The "How-to-do" VHS Tape



Question:

If I provide the large paper, would one of the members be willing to copy the 
clear acrylic templates onto the paper?   From there I would make the templates.



Also, if I provide the large paper, would one of the members be willing to copy 
the "sample Designs" onto the paper?  From there I would make the templates.



Lastly, would one of the members be willing to send me their VHS tape to copy 
and return their VHS



tape?



A word Doc showing the Legacy "Design Kit" information in the Legacy 
instruction manual is attached.




Nat

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
(mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com).
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/d0c3deef-e6a9-4afc-bb21-864839bcc61bn%40googlegroups.com.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
(mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com).
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAM7C%3D9Br3ruhnGE2U-yWrhcUcqCWcwZCivt-pbs91h6tLSOqKQ%40mail.gmail.com.


-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr..

Re: Legacy Design Kit

[Cole Andrews]

Nat can email me so I can get his address.. mine is    coleandrew...@gmail.comSent from my iPhoneOn Mar 13, 2023, at 9:45 PM, bulke...@mmnet.com.au wrote:Your right mac there isn’t anything about a piece of plexiglass I guess that’s why I don’t know anything about it lol The other thing that the design kit doesn’t have which need making is templates for all the combination bits   Bill  From: legacy-ornamental-mills@googlegroups.com  On Behalf Of M.W.FoscueSent: Tuesday, 14 March 2023 11:59 AMTo: legacy-ornamental-mills@googlegroups.comSubject: RE: Legacy Design Kit According to the below images of the Design Kit - it states "The Legacy Design Kit consists of:and it lists the components.  Nowhere in that list is any mention of a "blank sheet of plexiglas".I suspect it was something the earlier owner added/used(?) - but was not a component of the kit when purchased new. Does anyone have a copy of the "3 - Router Bit Keys for easy identification of the bits"?A bought my Design Kit from someone in our Group - and it did not have them.I'd sure like to get a copy - if possible. The other question I have: Has anyone ever taken a Design Kit sheet (round, long rectangle, or both) to a copy shop, like Staples, FedEx, etc. and had copies made?  If so, how'd they turn out and what was the cost? Here's an early "Happy St Patrick's Day" wish to all of ya'll!!Mac-Original Message-From: <legacy-ornamental-mills@googlegroups.com>Sent: Mar 13, 2023 5:27 PMTo: <legacy-ornamental-mills@googlegroups.com>Subject: RE: Legacy Design Kit That’s great Cole I’m sure Nat will be contacting you soon ,you know I still don’t know what the large blank sheet of plexiglassIs for, maybe its just to keep the paper from getting creases in it ??? Bill From: legacy-ornamental-mills@googlegroups.com <legacy-ornamental-mills@googlegroups.com> On Behalf Of Cole AndrewsSent: Tuesday, 14 March 2023 3:25 AMTo: legacy-ornamental-mills@googlegroups.comSubject: Re: Legacy Design Kit I might have some extra templates , when I bought mine they sent extra of some and none of the others , took awhile to get straight. On Sun, Mar 12, 2023 at 12:06 AM Nathaniel Bacon <natbac...@gmail.com> wrote:To all "Google Legacy Group" members: Included in a recent purchase was a box labeled "Design Kit".  The kit only contained:One large blank sheet of plexiglassThree 50-page pads of 11" x 39" spindle layout graph paperTwo -- square pads of 13" round layout paper Missing were:The three clear acrylic templatesThe 12 sample designsThe "How-to-do" VHS Tape Question:If I provide the large paper, would one of the members be willing to copy the clear acrylic templates onto the paper?   From there I would make the templates. Also, if I provide the large paper, would one of the members be willing to copy the "sample Designs" onto the paper?  From there I would make the templates. Lastly, would one of the members be willing to send me their VHS tape to copy and return their VHS tape? A word Doc showing the Legacy "Design Kit" information in the Legacy instruction manual is attached. Nat-- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/d0c3deef-e6a9-4afc-bb21-864839bcc61bn%40googlegroups.com.-- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAM7C%3D9Br3ruhnGE2U-yWrhcUcqCWcwZCivt-pbs91h6tLSOqKQ%40mail.gmail.com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/001101d955f2%247ec86850%247c5938f0%24%40mmnet.com.au. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/643afd6a-ff54-2368-776f-e4ec914e18a2%40earthlink.net.



-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubs

Re: Legacy Design Kit

[Tim Ziegler]

Could be a DXF file too; they are both used in Auto Cad.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Tue, Mar 14, 2023 at 9:42 AM  wrote:

> Is it a DWG file? I found a site online that will convert it.
>
>
>
> Bill Henry
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Jim Riggen
> *Sent:* Tuesday, March 14, 2023 9:48 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Legacy Design Kit
>
>
>
> I don't know how to convert it or if it is even possibly.
>
>
>
> Jim
>
>
>
> On Tue, Mar 14, 2023, 7:45 AM  wrote:
>
> Jim,
>
>
>
> Can you post the AutoCAD drawing in a format that can be opened without
> AutoCAD software?
>
>
>
> Bill Henry
>
> Baltimore
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *jrig...@gmail.com
> *Sent:* Monday, March 13, 2023 6:02 PM
> *To:* Legacy Ornamental Mills 
> *Subject:* Re: Legacy Design Kit
>
>
>
> You can also buy Magnate bits directly from Magnate.
> https://www.magnate.net/default.asp
>
>
>
> I have an Autocad drawing of the router bit templates if that would help.
>
>
>
> Jim Riggen
>
> On Sunday, March 12, 2023 at 6:29:26 PM UTC-5 Nathaniel Bacon wrote:
>
> Sunday March 12, 2023 @ 4pm PDT
>
>
>
> To: bulk...@mmnet.com.au
>
> Bill:
>
>
>
> Thank you so much for your offer.
>
> I'm new to Legacy Mills.  I've been persistent in buying as much as I can,
> to obtain tools that are as complete as possible.
>
> My objectives are to take one step at a time. The first is to get the
> tools and the next is to learn how to use them properly.
>
> That's where the design kit has become important to me.  Learning the
> correct way and not guessing.
>
>
>
> On the router bits, Magnate router bits are still available on eBay from
> eBay seller: "*mbauc*
> <https://www.ebay.com/usr/mbauc?_trksid=p2047675.m3561.l2559>" located in 
> Fullerton,
> California, USA.
>
> That makes it easier to coordinate the Legacy Design Center guides to the
> description of the router bits by reference numbers.
>
>
>
> Anything you can do will help.  Is there anything that you are looking
> for?
>
> On a side note, yes my surname "Bacon" is English.  My family originated
> in England and has been in America since 1635, before it became the USA!
>
> I've been to both Sydney and Perth, back in the 1960's.  I was very
> impressed by the warm and friendly people and the locations!
>
>
>
> Sincerely,
>
> Nathaniel Bacon
>
> email: natb...@hotmail.com
>
> Vacaville, CA, USA
>
>
>
> On Sun, Mar 12, 2023 at 10:50 AM  wrote:
>
> Hi Nathaniel
>
> I would do this for you but I am in Australia, if you can’t get anyone
> privet message me by email and we will see what I can do
>
> I might be able to scan the templates and email them to you the problem
> with that is printing them the correct size
>
> One of the members with a laser cutter might be able to help you I had a
> template set once that was cut out of 1mm thick
>
> plastic worked ok for years. I might be able to help with the video too
> maybe. Also some members have extra sets they might sell you a set of
> templates .
>
>
>
> Bill
>
>
>
> *From:* legacy-orna...@googlegroups.com  *On
> Behalf Of *Nathaniel Bacon
> *Sent:* Sunday, 12 March 2023 5:06 PM
> *To:* Legacy Ornamental Mills 
> *Subject:* Legacy Design Kit
>
>
>
> To all "Google Legacy Group" members:
>
>
>
> Included in a recent purchase was a box labeled "Design Kit".  The kit
> only contained:
>
> One large blank sheet of plexiglass
>
> Three 50-page pads of 11" x 39" spindle layout graph paper
>
> Two -- square pads of 13" round layout paper
>
>
>
> Missing were:
>
> The three clear acrylic templates
>
> The 12 sample designs
>
> The "How-to-do" VHS Tape
>
>
>
> Question:
>
> If I provide the large paper, would one of the members be willing to copy
> the clear acrylic templates onto the paper?   From there I would make the
> templates.
>
>
>
> Also, if I provide the large paper, would one of the members be willing to
> copy the "sample Designs" onto the paper?  From there I would make the
> templates.
>
>
>
> Lastly, would one of the members be willing to send me their VHS tape to
> copy and ret

Re: Legacy Design Kit

[Tim Ziegler]

Jim you should be able to go into "Save as" and save it as PDF or something?
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Tue, Mar 14, 2023 at 8:48 AM Jim Riggen  wrote:

> I don't know how to convert it or if it is even possibly.
>
> Jim
>
> On Tue, Mar 14, 2023, 7:45 AM  wrote:
>
>> Jim,
>>
>>
>>
>> Can you post the AutoCAD drawing in a format that can be opened without
>> AutoCAD software?
>>
>>
>>
>> Bill Henry
>>
>> Baltimore
>>
>>
>>
>> *From:* legacy-ornamental-mills@googlegroups.com <
>> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *
>> jrig...@gmail.com
>> *Sent:* Monday, March 13, 2023 6:02 PM
>> *To:* Legacy Ornamental Mills 
>> *Subject:* Re: Legacy Design Kit
>>
>>
>>
>> You can also buy Magnate bits directly from Magnate.
>> https://www.magnate.net/default.asp
>>
>>
>>
>> I have an Autocad drawing of the router bit templates if that would help.
>>
>>
>>
>> Jim Riggen
>>
>> On Sunday, March 12, 2023 at 6:29:26 PM UTC-5 Nathaniel Bacon wrote:
>>
>> Sunday March 12, 2023 @ 4pm PDT
>>
>>
>>
>> To: bulk...@mmnet.com.au
>>
>> Bill:
>>
>>
>>
>> Thank you so much for your offer.
>>
>> I'm new to Legacy Mills.  I've been persistent in buying as much as I
>> can, to obtain tools that are as complete as possible.
>>
>> My objectives are to take one step at a time. The first is to get the
>> tools and the next is to learn how to use them properly.
>>
>> That's where the design kit has become important to me.  Learning the
>> correct way and not guessing.
>>
>>
>>
>> On the router bits, Magnate router bits are still available on eBay from
>> eBay seller: "*mbauc*
>> <https://www.ebay.com/usr/mbauc?_trksid=p2047675.m3561.l2559>" located
>> in Fullerton, California, USA.
>>
>> That makes it easier to coordinate the Legacy Design Center guides to the
>> description of the router bits by reference numbers.
>>
>>
>>
>> Anything you can do will help.  Is there anything that you are looking
>> for?
>>
>> On a side note, yes my surname "Bacon" is English.  My family originated
>> in England and has been in America since 1635, before it became the USA!
>>
>> I've been to both Sydney and Perth, back in the 1960's.  I was very
>> impressed by the warm and friendly people and the locations!
>>
>>
>>
>> Sincerely,
>>
>> Nathaniel Bacon
>>
>> email: natb...@hotmail.com
>>
>> Vacaville, CA, USA
>>
>>
>>
>> On Sun, Mar 12, 2023 at 10:50 AM  wrote:
>>
>> Hi Nathaniel
>>
>> I would do this for you but I am in Australia, if you can’t get anyone
>> privet message me by email and we will see what I can do
>>
>> I might be able to scan the templates and email them to you the problem
>> with that is printing them the correct size
>>
>> One of the members with a laser cutter might be able to help you I had a
>> template set once that was cut out of 1mm thick
>>
>> plastic worked ok for years. I might be able to help with the video too
>> maybe. Also some members have extra sets they might sell you a set of
>> templates .
>>
>>
>>
>> Bill
>>
>>
>>
>> *From:* legacy-orna...@googlegroups.com 
>> *On Behalf Of *Nathaniel Bacon
>> *Sent:* Sunday, 12 March 2023 5:06 PM
>> *To:* Legacy Ornamental Mills 
>> *Subject:* Legacy Design Kit
>>
>>
>>
>> To all "Google Legacy Group" members:
>>
>>
>>
>> Included in a recent purchase was a box labeled "Design Kit".  The kit
>> only contained:
>>
>> One large blank sheet of plexiglass
>>
>> Three 50-page pads of 11" x 39" spindle layout graph paper
>>
>> Two -- square pads of 13" round layout paper
>>
>>
>>
>> Missing were:
>>
>> The three clear acrylic templates
>>
>> The 12 sample designs
>>
>> The "How-to-do" VHS Tape
>>
>>
>>
>> Question:
>>
>> If I provide the large paper, would one of the members be willing to copy
>> the clear acrylic templates onto the paper?   From there I would make the
>> templates.
>>
>>
>>
>> Also, if I provide the large paper

Re: Legacy Design Kit

[Tim Ziegler]

If he saves it under a different Format he should be able to.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Tue, Mar 14, 2023 at 7:45 AM  wrote:

> Jim,
>
>
>
> Can you post the AutoCAD drawing in a format that can be opened without
> AutoCAD software?
>
>
>
> Bill Henry
>
> Baltimore
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *jrig...@gmail.com
> *Sent:* Monday, March 13, 2023 6:02 PM
> *To:* Legacy Ornamental Mills 
> *Subject:* Re: Legacy Design Kit
>
>
>
> You can also buy Magnate bits directly from Magnate.
> https://www.magnate.net/default.asp
>
>
>
> I have an Autocad drawing of the router bit templates if that would help.
>
>
>
> Jim Riggen
>
> On Sunday, March 12, 2023 at 6:29:26 PM UTC-5 Nathaniel Bacon wrote:
>
> Sunday March 12, 2023 @ 4pm PDT
>
>
>
> To: bulk...@mmnet.com.au
>
> Bill:
>
>
>
> Thank you so much for your offer.
>
> I'm new to Legacy Mills.  I've been persistent in buying as much as I can,
> to obtain tools that are as complete as possible.
>
> My objectives are to take one step at a time. The first is to get the
> tools and the next is to learn how to use them properly.
>
> That's where the design kit has become important to me.  Learning the
> correct way and not guessing.
>
>
>
> On the router bits, Magnate router bits are still available on eBay from
> eBay seller: "*mbauc*
> <https://www.ebay.com/usr/mbauc?_trksid=p2047675.m3561.l2559>" located in 
> Fullerton,
> California, USA.
>
> That makes it easier to coordinate the Legacy Design Center guides to the
> description of the router bits by reference numbers.
>
>
>
> Anything you can do will help.  Is there anything that you are looking
> for?
>
> On a side note, yes my surname "Bacon" is English.  My family originated
> in England and has been in America since 1635, before it became the USA!
>
> I've been to both Sydney and Perth, back in the 1960's.  I was very
> impressed by the warm and friendly people and the locations!
>
>
>
> Sincerely,
>
> Nathaniel Bacon
>
> email: natb...@hotmail.com
>
> Vacaville, CA, USA
>
>
>
> On Sun, Mar 12, 2023 at 10:50 AM  wrote:
>
> Hi Nathaniel
>
> I would do this for you but I am in Australia, if you can’t get anyone
> privet message me by email and we will see what I can do
>
> I might be able to scan the templates and email them to you the problem
> with that is printing them the correct size
>
> One of the members with a laser cutter might be able to help you I had a
> template set once that was cut out of 1mm thick
>
> plastic worked ok for years. I might be able to help with the video too
> maybe. Also some members have extra sets they might sell you a set of
> templates .
>
>
>
> Bill
>
>
>
> *From:* legacy-orna...@googlegroups.com  *On
> Behalf Of *Nathaniel Bacon
> *Sent:* Sunday, 12 March 2023 5:06 PM
> *To:* Legacy Ornamental Mills 
> *Subject:* Legacy Design Kit
>
>
>
> To all "Google Legacy Group" members:
>
>
>
> Included in a recent purchase was a box labeled "Design Kit".  The kit
> only contained:
>
> One large blank sheet of plexiglass
>
> Three 50-page pads of 11" x 39" spindle layout graph paper
>
> Two -- square pads of 13" round layout paper
>
>
>
> Missing were:
>
> The three clear acrylic templates
>
> The 12 sample designs
>
> The "How-to-do" VHS Tape
>
>
>
> Question:
>
> If I provide the large paper, would one of the members be willing to copy
> the clear acrylic templates onto the paper?   From there I would make the
> templates.
>
>
>
> Also, if I provide the large paper, would one of the members be willing to
> copy the "sample Designs" onto the paper?  From there I would make the
> templates.
>
>
>
> Lastly, would one of the members be willing to send me their VHS tape to
> copy and return their VHS tape?
>
>
>
> A word Doc showing the Legacy "Design Kit" information in the Legacy
> instruction manual is attached.
>
>
>
> Nat
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/

RE: Legacy Design Kit

[wm.o.henry]

Is it a DWG file? I found a site online that will convert it. 

 

Bill Henry

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Jim Riggen
Sent: Tuesday, March 14, 2023 9:48 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Legacy Design Kit

 

I don't know how to convert it or if it is even possibly.

 

Jim

 

On Tue, Mar 14, 2023, 7:45 AM mailto:wm.o.he...@gmail.com> > wrote:

Jim,

 

Can you post the AutoCAD drawing in a format that can be opened without AutoCAD 
software? 

 

Bill Henry

Baltimore

 

From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of 
jrig...@gmail.com <mailto:jrig...@gmail.com> 
Sent: Monday, March 13, 2023 6:02 PM
To: Legacy Ornamental Mills mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: Re: Legacy Design Kit

 

You can also buy Magnate bits directly from Magnate. 
https://www.magnate.net/default.asp

 

I have an Autocad drawing of the router bit templates if that would help.

 

Jim Riggen

On Sunday, March 12, 2023 at 6:29:26 PM UTC-5 Nathaniel Bacon wrote:

Sunday March 12, 2023 @ 4pm PDT

 

To: bulk...@mmnet.com.au <mailto:bulk...@mmnet.com.au> 

Bill:

 

Thank you so much for your offer.

I'm new to Legacy Mills.  I've been persistent in buying as much as I can, to 
obtain tools that are as complete as possible.

My objectives are to take one step at a time. The first is to get the tools and 
the next is to learn how to use them properly.  

That's where the design kit has become important to me.  Learning the correct 
way and not guessing.

 

On the router bits, Magnate router bits are still available on eBay from eBay 
seller: " <https://www.ebay.com/usr/mbauc?_trksid=p2047675.m3561.l2559> mbauc" 
located in Fullerton, California, USA.

That makes it easier to coordinate the Legacy Design Center guides to the 
description of the router bits by reference numbers. 

 

Anything you can do will help.  Is there anything that you are looking for?  

On a side note, yes my surname "Bacon" is English.  My family originated in 
England and has been in America since 1635, before it became the USA!  

I've been to both Sydney and Perth, back in the 1960's.  I was very impressed 
by the warm and friendly people and the locations! 

 

Sincerely, 

Nathaniel Bacon

email: natb...@hotmail.com <mailto:natb...@hotmail.com> 

Vacaville, CA, USA

 

On Sun, Mar 12, 2023 at 10:50 AM mailto:bulk...@mmnet.com.au> > wrote:

Hi Nathaniel 

I would do this for you but I am in Australia, if you can’t get anyone privet 
message me by email and we will see what I can do

I might be able to scan the templates and email them to you the problem with 
that is printing them the correct size 

One of the members with a laser cutter might be able to help you I had a 
template set once that was cut out of 1mm thick

plastic worked ok for years. I might be able to help with the video too maybe. 
Also some members have extra sets they might sell you a set of templates .

 

Bill

 

From: legacy-orna...@googlegroups.com <mailto:legacy-orna...@googlegroups.com>  
mailto:legacy-orna...@googlegroups.com> > On 
Behalf Of Nathaniel Bacon
Sent: Sunday, 12 March 2023 5:06 PM
To: Legacy Ornamental Mills mailto:legacy-orna...@googlegroups.com> >
Subject: Legacy Design Kit

 

To all "Google Legacy Group" members:

 

Included in a recent purchase was a box labeled "Design Kit".  The kit only 
contained:

One large blank sheet of plexiglass

Three 50-page pads of 11" x 39" spindle layout graph paper

Two -- square pads of 13" round layout paper

 

Missing were:

The three clear acrylic templates

The 12 sample designs

The "How-to-do" VHS Tape

 

Question:

If I provide the large paper, would one of the members be willing to copy the 
clear acrylic templates onto the paper?   From there I would make the templates.

 

Also, if I provide the large paper, would one of the members be willing to copy 
the "sample Designs" onto the paper?  From there I would make the templates.

 

Lastly, would one of the members be willing to send me their VHS tape to copy 
and return their VHS   
<https://groups.google.com/group/legacy-ornamental-mills/attach/63f7ba9a33da0/image001.png?part=0.1=1>
   
<https://groups.google.com/group/legacy-ornamental-mills/attach/63f7ba9a33da0/image002.png?part=0.2=1>
   
<https://groups.google.com/group/legacy-ornamental-mills/attach/63f7ba9a33da0/image003.png?part=0.3=1>
 tape?

 

A word Doc showing the Legacy "Design Kit" information in the Legacy 
instruction manual is attached.

 

Nat

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails

RE: Legacy Design Kit

[wm.o.henry]

If you send it to me I may be able to figure out how to do it. I have some 
AutoCAD products that may do it

 

Thanks,

 

Bill Henry

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Jim Riggen
Sent: Tuesday, March 14, 2023 9:48 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Legacy Design Kit

 

I don't know how to convert it or if it is even possibly.

 

Jim

 

On Tue, Mar 14, 2023, 7:45 AM mailto:wm.o.he...@gmail.com> > wrote:

Jim,

 

Can you post the AutoCAD drawing in a format that can be opened without AutoCAD 
software? 

 

Bill Henry

Baltimore

 

From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of 
jrig...@gmail.com <mailto:jrig...@gmail.com> 
Sent: Monday, March 13, 2023 6:02 PM
To: Legacy Ornamental Mills mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: Re: Legacy Design Kit

 

You can also buy Magnate bits directly from Magnate. 
https://www.magnate.net/default.asp

 

I have an Autocad drawing of the router bit templates if that would help.

 

Jim Riggen

On Sunday, March 12, 2023 at 6:29:26 PM UTC-5 Nathaniel Bacon wrote:

Sunday March 12, 2023 @ 4pm PDT

 

To: bulk...@mmnet.com.au <mailto:bulk...@mmnet.com.au> 

Bill:

 

Thank you so much for your offer.

I'm new to Legacy Mills.  I've been persistent in buying as much as I can, to 
obtain tools that are as complete as possible.

My objectives are to take one step at a time. The first is to get the tools and 
the next is to learn how to use them properly.  

That's where the design kit has become important to me.  Learning the correct 
way and not guessing.

 

On the router bits, Magnate router bits are still available on eBay from eBay 
seller: " <https://www.ebay.com/usr/mbauc?_trksid=p2047675.m3561.l2559> mbauc" 
located in Fullerton, California, USA.

That makes it easier to coordinate the Legacy Design Center guides to the 
description of the router bits by reference numbers. 

 

Anything you can do will help.  Is there anything that you are looking for?  

On a side note, yes my surname "Bacon" is English.  My family originated in 
England and has been in America since 1635, before it became the USA!  

I've been to both Sydney and Perth, back in the 1960's.  I was very impressed 
by the warm and friendly people and the locations! 

 

Sincerely, 

Nathaniel Bacon

email: natb...@hotmail.com <mailto:natb...@hotmail.com> 

Vacaville, CA, USA

 

On Sun, Mar 12, 2023 at 10:50 AM mailto:bulk...@mmnet.com.au> > wrote:

Hi Nathaniel 

I would do this for you but I am in Australia, if you can’t get anyone privet 
message me by email and we will see what I can do

I might be able to scan the templates and email them to you the problem with 
that is printing them the correct size 

One of the members with a laser cutter might be able to help you I had a 
template set once that was cut out of 1mm thick

plastic worked ok for years. I might be able to help with the video too maybe. 
Also some members have extra sets they might sell you a set of templates .

 

Bill

 

From: legacy-orna...@googlegroups.com <mailto:legacy-orna...@googlegroups.com>  
mailto:legacy-orna...@googlegroups.com> > On 
Behalf Of Nathaniel Bacon
Sent: Sunday, 12 March 2023 5:06 PM
To: Legacy Ornamental Mills mailto:legacy-orna...@googlegroups.com> >
Subject: Legacy Design Kit

 

To all "Google Legacy Group" members:

 

Included in a recent purchase was a box labeled "Design Kit".  The kit only 
contained:

One large blank sheet of plexiglass

Three 50-page pads of 11" x 39" spindle layout graph paper

Two -- square pads of 13" round layout paper

 

Missing were:

The three clear acrylic templates

The 12 sample designs

The "How-to-do" VHS Tape

 

Question:

If I provide the large paper, would one of the members be willing to copy the 
clear acrylic templates onto the paper?   From there I would make the templates.

 

Also, if I provide the large paper, would one of the members be willing to copy 
the "sample Designs" onto the paper?  From there I would make the templates.

 

Lastly, would one of the members be willing to send me their VHS tape to copy 
and return their VHS   
<https://groups.google.com/group/legacy-ornamental-mills/attach/63f7ba9a33da0/image001.png?part=0.1=1>
   
<https://groups.google.com/group/legacy-ornamental-mills/attach/63f7ba9a33da0/image002.png?part=0.2=1>
   
<https://groups.google.com/group/legacy-ornamental-mills/attach/63f7ba9a33da0/image003.png?part=0.3=1>
 tape?

 

A word Doc showing the Legacy "Design Kit" information in the Legacy 
instruction manual is attached.

 

Nat

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" g

Re: Legacy Design Kit

[Jim Riggen]

I don't know how to convert it or if it is even possibly.

Jim

On Tue, Mar 14, 2023, 7:45 AM  wrote:

> Jim,
>
>
>
> Can you post the AutoCAD drawing in a format that can be opened without
> AutoCAD software?
>
>
>
> Bill Henry
>
> Baltimore
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *jrig...@gmail.com
> *Sent:* Monday, March 13, 2023 6:02 PM
> *To:* Legacy Ornamental Mills 
> *Subject:* Re: Legacy Design Kit
>
>
>
> You can also buy Magnate bits directly from Magnate.
> https://www.magnate.net/default.asp
>
>
>
> I have an Autocad drawing of the router bit templates if that would help.
>
>
>
> Jim Riggen
>
> On Sunday, March 12, 2023 at 6:29:26 PM UTC-5 Nathaniel Bacon wrote:
>
> Sunday March 12, 2023 @ 4pm PDT
>
>
>
> To: bulk...@mmnet.com.au
>
> Bill:
>
>
>
> Thank you so much for your offer.
>
> I'm new to Legacy Mills.  I've been persistent in buying as much as I can,
> to obtain tools that are as complete as possible.
>
> My objectives are to take one step at a time. The first is to get the
> tools and the next is to learn how to use them properly.
>
> That's where the design kit has become important to me.  Learning the
> correct way and not guessing.
>
>
>
> On the router bits, Magnate router bits are still available on eBay from
> eBay seller: "*mbauc*
> <https://www.ebay.com/usr/mbauc?_trksid=p2047675.m3561.l2559>" located in 
> Fullerton,
> California, USA.
>
> That makes it easier to coordinate the Legacy Design Center guides to the
> description of the router bits by reference numbers.
>
>
>
> Anything you can do will help.  Is there anything that you are looking
> for?
>
> On a side note, yes my surname "Bacon" is English.  My family originated
> in England and has been in America since 1635, before it became the USA!
>
> I've been to both Sydney and Perth, back in the 1960's.  I was very
> impressed by the warm and friendly people and the locations!
>
>
>
> Sincerely,
>
> Nathaniel Bacon
>
> email: natb...@hotmail.com
>
> Vacaville, CA, USA
>
>
>
> On Sun, Mar 12, 2023 at 10:50 AM  wrote:
>
> Hi Nathaniel
>
> I would do this for you but I am in Australia, if you can’t get anyone
> privet message me by email and we will see what I can do
>
> I might be able to scan the templates and email them to you the problem
> with that is printing them the correct size
>
> One of the members with a laser cutter might be able to help you I had a
> template set once that was cut out of 1mm thick
>
> plastic worked ok for years. I might be able to help with the video too
> maybe. Also some members have extra sets they might sell you a set of
> templates .
>
>
>
> Bill
>
>
>
> *From:* legacy-orna...@googlegroups.com  *On
> Behalf Of *Nathaniel Bacon
> *Sent:* Sunday, 12 March 2023 5:06 PM
> *To:* Legacy Ornamental Mills 
> *Subject:* Legacy Design Kit
>
>
>
> To all "Google Legacy Group" members:
>
>
>
> Included in a recent purchase was a box labeled "Design Kit".  The kit
> only contained:
>
> One large blank sheet of plexiglass
>
> Three 50-page pads of 11" x 39" spindle layout graph paper
>
> Two -- square pads of 13" round layout paper
>
>
>
> Missing were:
>
> The three clear acrylic templates
>
> The 12 sample designs
>
> The "How-to-do" VHS Tape
>
>
>
> Question:
>
> If I provide the large paper, would one of the members be willing to copy
> the clear acrylic templates onto the paper?   From there I would make the
> templates.
>
>
>
> Also, if I provide the large paper, would one of the members be willing to
> copy the "sample Designs" onto the paper?  From there I would make the
> templates.
>
>
>
> Lastly, would one of the members be willing to send me their VHS tape to
> copy and return their VHS tape?
>
>
>
> A word Doc showing the Legacy "Design Kit" information in the Legacy
> instruction manual is attached.
>
>
>
> Nat
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/d0c3deef-e6a9-4afc-bb21-864839bcc61bn%40googlegroups.com
> <https://groups.google.com/d/msgid/legacy-orn

RE: Legacy Design Kit

[wm.o.henry]

Jim,

 

Can you post the AutoCAD drawing in a format that can be opened without AutoCAD 
software? 

 

Bill Henry

Baltimore

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of jrig...@gmail.com
Sent: Monday, March 13, 2023 6:02 PM
To: Legacy Ornamental Mills 
Subject: Re: Legacy Design Kit

 

You can also buy Magnate bits directly from Magnate. 
https://www.magnate.net/default.asp

 

I have an Autocad drawing of the router bit templates if that would help.

 

Jim Riggen

On Sunday, March 12, 2023 at 6:29:26 PM UTC-5 Nathaniel Bacon wrote:

Sunday March 12, 2023 @ 4pm PDT

 

To: bulk...@mmnet.com.au <mailto:bulk...@mmnet.com.au> 

Bill:

 

Thank you so much for your offer.

I'm new to Legacy Mills.  I've been persistent in buying as much as I can, to 
obtain tools that are as complete as possible.

My objectives are to take one step at a time. The first is to get the tools and 
the next is to learn how to use them properly.  

That's where the design kit has become important to me.  Learning the correct 
way and not guessing.

 

On the router bits, Magnate router bits are still available on eBay from eBay 
seller: " <https://www.ebay.com/usr/mbauc?_trksid=p2047675.m3561.l2559> mbauc" 
located in Fullerton, California, USA.

That makes it easier to coordinate the Legacy Design Center guides to the 
description of the router bits by reference numbers. 

 

Anything you can do will help.  Is there anything that you are looking for?  

On a side note, yes my surname "Bacon" is English.  My family originated in 
England and has been in America since 1635, before it became the USA!  

I've been to both Sydney and Perth, back in the 1960's.  I was very impressed 
by the warm and friendly people and the locations! 

 

Sincerely, 

Nathaniel Bacon

email: natb...@hotmail.com <mailto:natb...@hotmail.com> 

Vacaville, CA, USA

 

On Sun, Mar 12, 2023 at 10:50 AM mailto:bulk...@mmnet.com.au> > wrote:

Hi Nathaniel 

I would do this for you but I am in Australia, if you can’t get anyone privet 
message me by email and we will see what I can do

I might be able to scan the templates and email them to you the problem with 
that is printing them the correct size 

One of the members with a laser cutter might be able to help you I had a 
template set once that was cut out of 1mm thick

plastic worked ok for years. I might be able to help with the video too maybe. 
Also some members have extra sets they might sell you a set of templates .

 

Bill

 

From: legacy-orna...@googlegroups.com <mailto:legacy-orna...@googlegroups.com>  
mailto:legacy-orna...@googlegroups.com> > On 
Behalf Of Nathaniel Bacon
Sent: Sunday, 12 March 2023 5:06 PM
To: Legacy Ornamental Mills mailto:legacy-orna...@googlegroups.com> >
Subject: Legacy Design Kit

 

To all "Google Legacy Group" members:

 

Included in a recent purchase was a box labeled "Design Kit".  The kit only 
contained:

One large blank sheet of plexiglass

Three 50-page pads of 11" x 39" spindle layout graph paper

Two -- square pads of 13" round layout paper

 

Missing were:

The three clear acrylic templates

The 12 sample designs

The "How-to-do" VHS Tape

 

Question:

If I provide the large paper, would one of the members be willing to copy the 
clear acrylic templates onto the paper?   From there I would make the templates.

 

Also, if I provide the large paper, would one of the members be willing to copy 
the "sample Designs" onto the paper?  From there I would make the templates.

 

Lastly, would one of the members be willing to send me their VHS tape to copy 
and return their VHS   
<https://groups.google.com/group/legacy-ornamental-mills/attach/63f7ba9a33da0/image001.png?part=0.1=1>
   
<https://groups.google.com/group/legacy-ornamental-mills/attach/63f7ba9a33da0/image002.png?part=0.2=1>
   
<https://groups.google.com/group/legacy-ornamental-mills/attach/63f7ba9a33da0/image003.png?part=0.3=1>
 tape?

 

A word Doc showing the Legacy "Design Kit" information in the Legacy 
instruction manual is attached.

 

Nat

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental...@googlegroups.com 
<mailto:legacy-ornamental...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/d0c3deef-e6a9-4afc-bb21-864839bcc61bn%40googlegroups.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/d0c3deef-e6a9-4afc-bb21-864839bcc61bn%40googlegroups.com?utm_medium=email_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it,

Re: Legacy Design Kit

[jrig...@gmail.com]

You can also buy Magnate bits directly from 
Magnate. https://www.magnate.net/default.asp

I have an Autocad drawing of the router bit templates if that would help.

Jim Riggen

On Sunday, March 12, 2023 at 6:29:26 PM UTC-5 Nathaniel Bacon wrote:

> Sunday March 12, 2023 @ 4pm PDT
>
> To: bulk...@mmnet.com.au
> Bill:
>
> Thank you so much for your offer.
> I'm new to Legacy Mills.  I've been persistent in buying as much as I can, 
> to obtain tools that are as complete as possible.
> My objectives are to take one step at a time. The first is to get the 
> tools and the next is to learn how to use them properly.  
> That's where the design kit has become important to me.  Learning the 
> correct way and not guessing.
>
> On the router bits, Magnate router bits are still available on eBay from 
> eBay seller: "mbauc 
> <https://www.ebay.com/usr/mbauc?_trksid=p2047675.m3561.l2559>" located in 
> Fullerton, 
> California, USA.
> That makes it easier to coordinate the Legacy Design Center guides to the 
> description of the router bits by reference numbers. 
>
> Anything you can do will help.  Is there anything that you are looking 
> for?  
> On a side note, yes my surname "Bacon" is English.  My family originated 
> in England and has been in America since 1635, before it became the USA!  
> I've been to both Sydney and Perth, back in the 1960's.  I was very 
> impressed by the warm and friendly people and the locations! 
>
> Sincerely, 
> Nathaniel Bacon
> email: natb...@hotmail.com
> Vacaville, CA, USA
>
> On Sun, Mar 12, 2023 at 10:50 AM  wrote:
>
>> Hi Nathaniel 
>>
>> I would do this for you but I am in Australia, if you can’t get anyone 
>> privet message me by email and we will see what I can do
>>
>> I might be able to scan the templates and email them to you the problem 
>> with that is printing them the correct size 
>>
>> One of the members with a laser cutter might be able to help you I had a 
>> template set once that was cut out of 1mm thick
>>
>> plastic worked ok for years. I might be able to help with the video too 
>> maybe. Also some members have extra sets they might sell you a set of 
>> templates .
>>
>>  
>>
>> Bill
>>
>>  
>>
>> *From:* legacy-orna...@googlegroups.com  
>> *On Behalf Of *Nathaniel Bacon
>> *Sent:* Sunday, 12 March 2023 5:06 PM
>> *To:* Legacy Ornamental Mills 
>> *Subject:* Legacy Design Kit
>>
>>  
>>
>> To all "Google Legacy Group" members:
>>
>>  
>>
>> Included in a recent purchase was a box labeled "Design Kit".  The kit 
>> only contained:
>>
>> One large blank sheet of plexiglass
>>
>> Three 50-page pads of 11" x 39" spindle layout graph paper
>>
>> Two -- square pads of 13" round layout paper
>>
>>  
>>
>> Missing were:
>>
>> The three clear acrylic templates
>>
>> The 12 sample designs
>>
>> The "How-to-do" VHS Tape
>>
>>  
>>
>> Question:
>>
>> If I provide the large paper, would one of the members be willing to copy 
>> the clear acrylic templates onto the paper?   From there I would make the 
>> templates.
>>
>>  
>>
>> Also, if I provide the large paper, would one of the members be willing 
>> to copy the "sample Designs" onto the paper?  From there I would make the 
>> templates.
>>
>>  
>>
>> Lastly, would one of the members be willing to send me their VHS tape to 
>> copy and return their VHS tape?
>>
>>  
>>
>> A word Doc showing the Legacy "Design Kit" information in the Legacy 
>> instruction manual is attached.
>>
>>  
>>
>> Nat
>>
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to legacy-ornamental...@googlegroups.com.
>> To view this discussion on the web visit 
>> https://groups.google.com/d/msgid/legacy-ornamental-mills/d0c3deef-e6a9-4afc-bb21-864839bcc61bn%40googlegroups.com
>>  
>> <https://groups.google.com/d/msgid/legacy-ornamental-mills/d0c3deef-e6a9-4afc-bb21-864839bcc61bn%40googlegroups.com?utm_medium=email_source=footer>
>> .
>>
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop recei

Re: Winner of the Legacy design kit.

[Tim Ziegler]

Well thats sure great to hear. yay!
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Tue, Dec 1, 2020 at 1:33 AM  wrote:

> Yay congrats Tim I had a feeling you would win good for you buddy very
> very useful tool the design kit
>
> You can see what a whole project looks like without cutting a single chip
>
> And unlike a computer it works without power lol
>
>
>
> Bill
>
>
>
> *From:* 'Curt George' via Legacy Ornamental Mills <
> legacy-ornamental-mills@googlegroups.com>
> *Sent:* Tuesday, 1 December 2020 5:02 PM
> *To:* Legacy ornamental mills 
> *Subject:* Winner of the Legacy design kit.
>
>
>
> Hello Everyone.
>
>
>
> Let me start by saying the Google has not been my friend this month...
>
>
>
> Starting on Nov 3 the Google web site went with the new format to all
> Groups.
>
> I was not aware of this change over until NOV 5.
> When I could not check on the number of posting this month for our/this
> contest.
>
>
>
> So all posting needed to be counted by hand.(BY ME!) And Yesterday! I
> almost had a stroke when I saw 85 new postings, in one day! ;-)
>
>
>
> I can say this Month has been one for the record books. (if those record
> books were still in use.) ;-p
>
>
>
> The top three posters .
>
>
>
> In 3rd place with 71 postings. is Mac.
>
> In 2nd place with 116 postings is BILL.
>
>
>
> And the winner of this design kit. with 125 postings is.
>
>
>
> Tim Z. .
>
>
>
> Tim, I will be sending you, your package latter this week.
>
>
>
> I would like to Thank you all for a Great month of some very interesting
> topics and good information. Its been a lot of FUN.
>
> Thank you all.
>
>
>
> C.A.G.
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/703602592.1946362.1606802490325%40mail.yahoo.com
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/703602592.1946362.1606802490325%40mail.yahoo.com?utm_medium=email_source=footer>
> .
>
>
> <https://www.avast.com/sig-email?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
>  Virus-free.
> www.avast.com
> <https://www.avast.com/sig-email?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
> <#m_-6874995627259131372_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/001101d6c7b4%242de79240%2489b6b6c0%24%40mmnet.com.au
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/001101d6c7b4%242de79240%2489b6b6c0%24%40mmnet.com.au?utm_medium=email_source=footer>
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHa1-0eaSY5XLrZ1SOBU5dNek2b7Xyu8gq5Yyedtvc65A%40mail.gmail.com.

RE: Winner of the Legacy design kit.

[bulkeley]

Yay congrats Tim I had a feeling you would win good for you buddy very very 
useful tool the design kit 

You can see what a whole project looks like without cutting a single chip

And unlike a computer it works without power lol

 

Bill

 

From: 'Curt George' via Legacy Ornamental Mills 
 
Sent: Tuesday, 1 December 2020 5:02 PM
To: Legacy ornamental mills 
Subject: Winner of the Legacy design kit.

 

Hello Everyone.

 

Let me start by saying the Google has not been my friend this month...

 

Starting on Nov 3 the Google web site went with the new format to all Groups.

I was not aware of this change over until NOV 5. 
When I could not check on the number of posting this month for our/this contest.

 

So all posting needed to be counted by hand.(BY ME!) And Yesterday! I almost 
had a stroke when I saw 85 new postings, in one day! ;-)

 

I can say this Month has been one for the record books. (if those record books 
were still in use.) ;-p

 

The top three posters .

 

In 3rd place with 71 postings. is Mac.

In 2nd place with 116 postings is BILL.

 

And the winner of this design kit. with 125 postings is.

 

Tim Z. .

 

Tim, I will be sending you, your package latter this week.

 

I would like to Thank you all for a Great month of some very interesting topics 
and good information. Its been a lot of FUN.

Thank you all.

 

C.A.G.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/703602592.1946362.1606802490325%40mail.yahoo.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/703602592.1946362.1606802490325%40mail.yahoo.com?utm_medium=email_source=footer>
 .



-- 
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/001101d6c7b4%242de79240%2489b6b6c0%24%40mmnet.com.au.

Winner of the Legacy design kit.

['Curt George' via Legacy Ornamental Mills]

Hello Everyone.
Let me start by saying the Google has not been my friend this month...
Starting on Nov 3 the Google web site went with the new format to all Groups.I 
was not aware of this change over until NOV 5. 
When I could not check on the number of posting this month for our/this contest.

So all posting needed to be counted by hand.(BY ME!) And Yesterday! I almost 
had a stroke when I saw 85 new postings, in one day! ;-)
I can say this Month has been one for the record books. (if those record books 
were still in use.) ;-p
The top three posters .
In 3rd place with 71 postings. is Mac.In 2nd place with 116 postings is BILL.
And the winner of this design kit. with 125 postings is.
Tim Z. .
Tim, I will be sending you, your package latter this week.
I would like to Thank you all for a Great month of some very interesting topics 
and good information. Its been a lot of FUN.Thank you all.
C.A.G.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/703602592.1946362.1606802490325%40mail.yahoo.com.

Re: November 1st. Who wants a Legacy Design kit?

['Curt George' via Legacy Ornamental Mills]

Hello Everyone,  6 more day left in this month.
The posting have been up this month,  so far its been a horse race between 
Bill, Mac and Tim Z.
for the most postings.  Its been a lot of fun reading everyone reply's and 
ideas.
Please keep up the good work. 

C.A.G.

On Sunday, November 1, 2020 at 5:56:40 PM UTC-5 Curt George wrote:

> Hello everyone.
>
> Who wants to win a Legacy Design kit?  In the past a number of our group 
> were all looking to buy one.  Since I found one.  This could be a good 
> chance that someone here could win it.
> What I would like to do, This month, Whom ever posts the most ,will win 
> this design kit.
>
> The Google system counts every posting everyone makes, So you don't have 
> to make your own topics, if you don't want to to win this design kit, all 
> you need to do is correspondence with the group.
>  By sharing ideas we all grow, by covering the ideas in more detail, gives 
> up more to think about.  So as I see it, this will be a win, win... for 
> everyone. 
> NOW lets keep this on the Up and Up. Lets have some fun, and start 
> talking. ;-)
>
> C.A.G.
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1872b601-872b-4116-810f-fe818ce500f3n%40googlegroups.com.

November 1st. Who wants a Legacy Design kit?

['Curt George' via Legacy Ornamental Mills]

Hello everyone.
Who wants to win a Legacy Design kit?  In the past a number of our group were 
all looking to buy one.  Since I found one.  This could be a good chance that 
someone here could win it.What I would like to do, This month, Whom ever posts 
the most ,will win this design kit.
The Google system counts every posting everyone makes, So you don't have to 
make your own topics, if you don't want to to win this design kit, all you need 
to do is correspondence with the group. By sharing ideas we all grow, by 
covering the ideas in more detail, gives up more to think about.  So as I see 
it, this will be a win, win... for everyone. NOW lets keep this on the Up and 
Up. Lets have some fun, and start talking. ;-)
C.A.G.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/265445270.760906.1604271396480%40mail.yahoo.com.

Re: legacy design kit

[Paul Richmond]

There is a video on the design kit located in the Videos directory of the 
following link;

https://drive.google.com/drive/folders/122Gx6u5a9GiXFQBPtbKwOdJ6f_kVnw3t?usp=sharing

Not the greatest quality but better than nothing.

Paul

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/273c25b5-f37b-4b18-a892-a28de27d87bf%40googlegroups.com.

RE: legacy design kit

[Stan Partin]

Thx.

Sent from Mail for Windows 10

From: rtjurg...@gmail.com
Sent: Saturday, August 24, 2019 8:08 PM
To: legacy-ornamental-mills@googlegroups.com; Stan Partin; 
legacy-ornamental-mills@googlegroups.com
Subject: RE: legacy design kit

https://minneapolis.craigslist.org/hnp/tls/d/northfield-legacy-ornamental-milling/6961228117.html

I took a look at the craigslist posting. Looks good!
Sent from Yahoo Mail on Android

On Sat, Aug 24, 2019 at 7:26 PM, Stan Partin
 wrote:
Hi all,
I have a Legacy 60" Ornamental Mill model EX 1000 with EX floor stand package. 
I am probably never going to use it due to space limitations. I  am considering 
offers. It is listed on Craigslist, Northfield, MN.
Have  look
Stan
 
Sent from Mail for Windows 10
 
From: 'Curt George' via Legacy Ornamental Mills
Sent: Saturday, August 24, 2019 2:40 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: legacy design kit
 
HI Jim
 
take a photo. You know what they say, "a photo is worth a 1000 words".  :-)
 
C.A.G.
 
On Saturday, August 24, 2019, 02:58:40 PM EDT, 4 Jim Carpenter 
 wrote: 
 
 
Yes, support  is great, so while all are reading. I have a .25x gear with
16 flat edged double back plates but only a red index 36 with 12 flat edges.
do they go together and what value (s) if and not ?
 
On Thu, Aug 15, 2019 at 6:41 AM Brafield Bodger  wrote:
I keep getting the feeling I've been shortchanged.
 
Good news is I have now received the headstock screw to enable me to mount the 
supernova chuck.  Wasn't cheap but this was the only one I found that had the 
right screw thread so I think I've saves a few £ pounds by not having to 
purchase a new insert.
 
Think that is the lot for my wallet for now so I suppose I better get on and 
actually try and make something :)
 
Thanks for all the advice and support folks.
 
Ray
 
 
 
-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/daba69ff-7372-4d87-b604-9a3f24780bb8%40googlegroups.com.
-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CA%2BTVV5scKU%2B6fj8wAyPzTa-uG9UGRBR8_JUAR%2BgkEEYRt_A8ag%40mail.gmail.com.
-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/2112128153.1166836.1566675649366%40mail.yahoo.com.
 
-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/5d61d5b2.1c69fb81.2814d.0ee4SMTPIN_ADDED_MISSING%40gmr-mx.google.com.
-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/250261216.1204260.1566695310704%40mail.yahoo.com.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/5d61e6b4.1c69fb81.632df.b8d6SMTPIN_ADDED_MISSING%40gmr-mx.google.com.

RE: legacy design kit

[rtjurg...@gmail.com]

https://minneapolis.craigslist.org/hnp/tls/d/northfield-legacy-ornamental-milling/6961228117.html
I took a look at the craigslist posting. Looks good!

Sent from Yahoo Mail on Android 
 
  On Sat, Aug 24, 2019 at 7:26 PM, Stan Partin wrote:   
#yiv6715920036 #yiv6715920036 -- _filtered #yiv6715920036 
{font-family:Helvetica;panose-1:2 11 5 4 2 2 2 2 2 4;} _filtered #yiv6715920036 
{panose-1:2 4 5 3 5 4 6 3 2 4;} _filtered #yiv6715920036 
{font-family:Calibri;panose-1:2 15 5 2 2 2 4 3 2 4;}#yiv6715920036 
#yiv6715920036 p.yiv6715920036MsoNormal, #yiv6715920036 
li.yiv6715920036MsoNormal, #yiv6715920036 div.yiv6715920036MsoNormal 
{margin:0in;margin-bottom:.0001pt;font-size:11.0pt;font-family:sans-serif;}#yiv6715920036
 a:link, #yiv6715920036 span.yiv6715920036MsoHyperlink 
{color:blue;text-decoration:underline;}#yiv6715920036 
.yiv6715920036MsoChpDefault {} _filtered #yiv6715920036 {margin:1.0in 1.0in 
1.0in 1.0in;}#yiv6715920036 div.yiv6715920036WordSection1 {}#yiv6715920036 
Hi all,

I have a Legacy 60" Ornamental Mill model EX 1000 with EX floor stand package. 
I am probably never going to use it due to space limitations. I  am considering 
offers. It is listed on Craigslist, Northfield, MN.

Have  look

Stan

  

Sent from Mail for Windows 10

  

From: 'Curt George' via Legacy Ornamental Mills
Sent: Saturday, August 24, 2019 2:40 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: legacy design kit

  

HI Jim

  

take a photo. You know what they say, "a photo is worth a 1000 words".  :-)

  

C.A.G.

  

On Saturday, August 24, 2019, 02:58:40 PM EDT, 4 Jim Carpenter 
 wrote: 

  

  

Yes, support  is great, so while all are reading. I have a .25x gear with

16 flat edged double back plates but only a red index 36 with 12 flat edges.

do they go together and what value (s) if and not ?

  

On Thu, Aug 15, 2019 at 6:41 AM Brafield Bodger  wrote:


I keep getting the feeling I've been shortchanged.

  

Good news is I have now received the headstock screw to enable me to mount the 
supernova chuck.  Wasn't cheap but this was the only one I found that had the 
right screw thread so I think I've saves a few £ pounds by not having to 
purchase a new insert.

  

Think that is the lot for my wallet for now so I suppose I better get on and 
actually try and make something :)

  

Thanks for all the advice and support folks.

  

Ray

  

  

  

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/daba69ff-7372-4d87-b604-9a3f24780bb8%40googlegroups.com.


-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CA%2BTVV5scKU%2B6fj8wAyPzTa-uG9UGRBR8_JUAR%2BgkEEYRt_A8ag%40mail.gmail.com.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/2112128153.1166836.1566675649366%40mail.yahoo.com.

  


-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/5d61d5b2.1c69fb81.2814d.0ee4SMTPIN_ADDED_MISSING%40gmr-mx.google.com.
  

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/250261216.1204260.1566695310704%40mail.yahoo.com.

RE: legacy design kit

[Stan Partin]

Hi all,
I have a Legacy 60" Ornamental Mill model EX 1000 with EX floor stand package. 
I am probably never going to use it due to space limitations. I  am considering 
offers. It is listed on Craigslist, Northfield, MN.
Have  look
Stan

Sent from Mail for Windows 10

From: 'Curt George' via Legacy Ornamental Mills
Sent: Saturday, August 24, 2019 2:40 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: legacy design kit

HI Jim

take a photo. You know what they say, "a photo is worth a 1000 words".  :-)

C.A.G.

On Saturday, August 24, 2019, 02:58:40 PM EDT, 4 Jim Carpenter 
 wrote: 


Yes, support  is great, so while all are reading. I have a .25x gear with
16 flat edged double back plates but only a red index 36 with 12 flat edges.
do they go together and what value (s) if and not ?

On Thu, Aug 15, 2019 at 6:41 AM Brafield Bodger  wrote:
I keep getting the feeling I've been shortchanged.

Good news is I have now received the headstock screw to enable me to mount the 
supernova chuck.  Wasn't cheap but this was the only one I found that had the 
right screw thread so I think I've saves a few £ pounds by not having to 
purchase a new insert.

Think that is the lot for my wallet for now so I suppose I better get on and 
actually try and make something :)

Thanks for all the advice and support folks.

Ray



-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/daba69ff-7372-4d87-b604-9a3f24780bb8%40googlegroups.com.
-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CA%2BTVV5scKU%2B6fj8wAyPzTa-uG9UGRBR8_JUAR%2BgkEEYRt_A8ag%40mail.gmail.com.
-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/2112128153.1166836.1566675649366%40mail.yahoo.com.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/5d61d5b2.1c69fb81.2814d.0ee4SMTPIN_ADDED_MISSING%40gmr-mx.google.com.

Re: legacy design kit

['Curt George' via Legacy Ornamental Mills]

 HI Jim
take a photo. You know what they say, "a photo is worth a 1000 words".  :-)
C.A.G.
On Saturday, August 24, 2019, 02:58:40 PM EDT, 4 Jim Carpenter 
 wrote:  
 
 Yes, support  is great, so while all are reading. I have a .25x gear with16 
flat edged double back plates but only a red index 36 with 12 flat edges.do 
they go together and what value (s) if and not ?

On Thu, Aug 15, 2019 at 6:41 AM Brafield Bodger  wrote:

I keep getting the feeling I've been shortchanged.
Good news is I have now received the headstock screw to enable me to mount the 
supernova chuck.  Wasn't cheap but this was the only one I found that had the 
right screw thread so I think I've saves a few £ pounds by not having to 
purchase a new insert.
Think that is the lot for my wallet for now so I suppose I better get on and 
actually try and make something :)
Thanks for all the advice and support folks.
Ray




-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/daba69ff-7372-4d87-b604-9a3f24780bb8%40googlegroups.com.



-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CA%2BTVV5scKU%2B6fj8wAyPzTa-uG9UGRBR8_JUAR%2BgkEEYRt_A8ag%40mail.gmail.com.
  

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/2112128153.1166836.1566675649366%40mail.yahoo.com.

Re: legacy design kit

[4 Jim Carpenter]

Yes, support  is great, so while all are reading. I have a .25x gear with
16 flat edged double back plates but only a red index 36 with 12 flat edges.
do they go together and what value (s) if and not ?

On Thu, Aug 15, 2019 at 6:41 AM Brafield Bodger  wrote:

> I keep getting the feeling I've been shortchanged.
>
> Good news is I have now received the headstock screw to enable me to mount
> the supernova chuck.  Wasn't cheap but this was the only one I found that
> had the right screw thread so I think I've saves a few £ pounds by not
> having to purchase a new insert.
>
> Think that is the lot for my wallet for now so I suppose I better get on
> and actually try and make something :)
>
> Thanks for all the advice and support folks.
>
> Ray
>
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/daba69ff-7372-4d87-b604-9a3f24780bb8%40googlegroups.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CA%2BTVV5scKU%2B6fj8wAyPzTa-uG9UGRBR8_JUAR%2BgkEEYRt_A8ag%40mail.gmail.com.

RE: legacy design kit

[Ray]

Well – I bought the design kit when I got the machine.  Mine didn’t contain 
either the booklet or the DVD ☹

 

 

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of bulke...@mmnet.com.au
Sent: Wednesday, August 14, 2019 11:08 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: legacy design kit

 

Ok for all newbies out there the design kit is used to make drawings of spirals 
and shapes of things you can make on your mills

Sort of like blue prints. Here is part of the lessons that used to be available 
on line sorry but due to size I had to remove the video parts. And I don’t have 
lesson 3 but you get the idea maybe ray can get the instructions from legacy.

 

Bill 

.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/!%26!AAAYAGqWEOEXgXVNjDlMx5Hm6VPCgAAAEMkKbXRWmMNNjJaQZ3yRfdsBAA%3D%3D%40sky.com.

RE: Design Kit and Router Bit Templates

[Bill Bulkeley]

Nice mike how about adding these ones to it I always wanted them in the design 
kit

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Okla Mike 
(Liltwisted)
Sent: Saturday, 16 February 2019 10:22 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Design Kit and Router Bit Templates

 

Here you go I just busted them into single pages

Mike OK

On 2/13/2019 10:31 AM, jrigge...@gmail.com wrote:

To All,

 

I noticed that Legacy has now posted router bit profiles in the CNC portion of 
their website.  Does this mean we can now create our own router bit templates 
since they no longer make the Design Kit available for sale?

 

Our local library has a laser engraver/cutter available for public use that 
would work quite well for this task.

 

Just asking.

 

Jim

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

 


 
<http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
 

Virus-free.  
<http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
 www.avg.com 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: Design Kit and Router Bit Templates

[MWF]

I was able to "download" the link; however, the images of the profiles are REALLY REALLY SMALL!  So much so that I have to zoom in about 1000%.I understand they were saved in a CAD format - which probably opens them in their actual/true size.My computer is a Mac (Apple).  Does anyone know of a free program that will open the file on an Apple computer?Thanks - Have a Wonderful Weekend.Mac -Original Message-
From: 4 Jim Carpenter 
Sent: Feb 15, 2019 12:16 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Design Kit and Router Bit Templates

Thanks Bill, need to get more printer paper so can include the pages with my 1000xl steelyon Ebay. On Thu, Feb 14, 2019 at 3:01 PM Bill Bulkeley <bulke...@mmnet.com.au> wrote:













Not sure what you’re asking but you might find
this legacy training page on the design kit useful it has lots of picture of
the templates to show you what they are like very useful tool the design kit.



Bill

 



From:
legacy-ornamental-mills@googlegroups.com
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of 4 Jim Carpenter
Sent: Thursday, 14 February 2019
12:52 PM
To:
legacy-ornamental-mills@googlegroups.com
Subject: Re: Design Kit and Router
Bit Templates



 





Who has a picture of the router template - bit template





 





Are they the same ?





 





On Wed, Feb 13, 2019 at 10:31 AM <jrigge...@gmail.com> wrote:









To All,





 





I noticed that Legacy has now posted router bit profiles in the CNC
portion of their website.  Does this mean we can now create our own router
bit templates since they no longer make the Design Kit available for sale?





 





Our local library has a laser engraver/cutter available for public
use that would work quite well for this task.







Just asking.





 





Jim





-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: Design Kit and Router Bit Templates

[4 Jim Carpenter]

Thanks Bill, need to get more printer paper so can include the pages with
my 1000xl steely
on Ebay.

On Thu, Feb 14, 2019 at 3:01 PM Bill Bulkeley  wrote:

> Not sure what you’re asking but you might find this legacy training page
> on the design kit useful it has lots of picture of the templates to show
> you what they are like very useful tool the design kit.
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com [mailto:
> legacy-ornamental-mills@googlegroups.com] *On Behalf Of *4 Jim Carpenter
> *Sent:* Thursday, 14 February 2019 12:52 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Design Kit and Router Bit Templates
>
>
>
> Who has a picture of the router template - bit template
>
>
>
> Are they the same ?
>
>
>
> On Wed, Feb 13, 2019 at 10:31 AM  wrote:
>
> To All,
>
>
>
> I noticed that Legacy has now posted router bit profiles in the CNC
> portion of their website.  Does this mean we can now create our own router
> bit templates since they no longer make the Design Kit available for sale?
>
>
>
> Our local library has a laser engraver/cutter available for public
> use that would work quite well for this task.
>
>
>
> Just asking.
>
>
>
> Jim
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to
> legacy-ornamental-mills@googlegroups.com.
> Visit this group at
> https://groups.google.com/group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/d/optout.
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to
> legacy-ornamental-mills@googlegroups.com.
> Visit this group at
> https://groups.google.com/group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/d/optout.
>
>
>
>
> <http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
>
> Virus-free. www.avg.com
> <http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
>
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to
> legacy-ornamental-mills@googlegroups.com.
> Visit this group at
> https://groups.google.com/group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: Design Kit and Router Bit Templates

[4 Jim Carpenter]

Yes, also found on Acme, loads of bits and picture samples of the use
results. Thought I posted the link but will see if the link is still in
history.  Good guidance chart but would like in a 24 font.
Maybe after Lasik it will be better - lol. Ya, old

On Thu, Feb 14, 2019 at 1:29 AM Arkady Paka  wrote:

> Hi Jim.   Can  you  reed this file?
>
> чт, 14 февр. 2019 г. в 04:37, 4 Jim Carpenter :
>
>> Did google - www.Acmetools.com shows each bit cut for designing
>> edge or cut.
>>
>> On Wed, Feb 13, 2019 at 7:51 PM 4 Jim Carpenter <
>> carpenter.62...@gmail.com> wrote:
>>
>>> Who has a picture of the router template - bit template
>>>
>>> Are they the same ?
>>>
>>> On Wed, Feb 13, 2019 at 10:31 AM  wrote:
>>>
>>>> To All,
>>>>
>>>> I noticed that Legacy has now posted router bit profiles in the CNC
>>>> portion of their website.  Does this mean we can now create our own router
>>>> bit templates since they no longer make the Design Kit available for sale?
>>>>
>>>> Our local library has a laser engraver/cutter available for public
>>>> use that would work quite well for this task.
>>>>
>>>> Just asking.
>>>>
>>>> Jim
>>>>
>>>> --
>>>> You received this message because you are subscribed to the Google
>>>> Groups "Legacy Ornamental Mills" group.
>>>> To unsubscribe from this group and stop receiving emails from it, send
>>>> an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>>>> To post to this group, send email to
>>>> legacy-ornamental-mills@googlegroups.com.
>>>> Visit this group at
>>>> https://groups.google.com/group/legacy-ornamental-mills.
>>>> For more options, visit https://groups.google.com/d/optout.
>>>>
>>> --
>> You received this message because you are subscribed to the Google Groups
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>> To post to this group, send email to
>> legacy-ornamental-mills@googlegroups.com.
>> Visit this group at
>> https://groups.google.com/group/legacy-ornamental-mills.
>> For more options, visit https://groups.google.com/d/optout.
>>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to
> legacy-ornamental-mills@googlegroups.com.
> Visit this group at
> https://groups.google.com/group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: Design Kit and Router Bit Templates

[4 Jim Carpenter]

Did google - www.Acmetools.com shows each bit cut for designing
edge or cut.

On Wed, Feb 13, 2019 at 7:51 PM 4 Jim Carpenter 
wrote:

> Who has a picture of the router template - bit template
>
> Are they the same ?
>
> On Wed, Feb 13, 2019 at 10:31 AM  wrote:
>
>> To All,
>>
>> I noticed that Legacy has now posted router bit profiles in the CNC
>> portion of their website.  Does this mean we can now create our own router
>> bit templates since they no longer make the Design Kit available for sale?
>>
>> Our local library has a laser engraver/cutter available for public
>> use that would work quite well for this task.
>>
>> Just asking.
>>
>> Jim
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>> To post to this group, send email to
>> legacy-ornamental-mills@googlegroups.com.
>> Visit this group at
>> https://groups.google.com/group/legacy-ornamental-mills.
>> For more options, visit https://groups.google.com/d/optout.
>>
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: Design Kit and Router Bit Templates

[4 Jim Carpenter]

Who has a picture of the router template - bit template

Are they the same ?

On Wed, Feb 13, 2019 at 10:31 AM  wrote:

> To All,
>
> I noticed that Legacy has now posted router bit profiles in the CNC
> portion of their website.  Does this mean we can now create our own router
> bit templates since they no longer make the Design Kit available for sale?
>
> Our local library has a laser engraver/cutter available for public
> use that would work quite well for this task.
>
> Just asking.
>
> Jim
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to
> legacy-ornamental-mills@googlegroups.com.
> Visit this group at
> https://groups.google.com/group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: Design Kit and Router Bit Templates

[jwb...@windstream.net]

The profiles have been around for a very long time. If you buy a program like 
Turbo Cad (And learn to use it) this program can make turning spindles very 
easy (Even give you depth of cut) And yes, you can use the drawings to make 
your own Design kit. 


From: jrigge...@gmail.com 
To: "Legacy Ornamental Mills"  
Sent: Wednesday, February 13, 2019 11:31:47 AM 
Subject: Design Kit and Router Bit Templates 

To All, 

I noticed that Legacy has now posted router bit profiles in the CNC portion of 
their website. Does this mean we can now create our own router bit templates 
since they no longer make the Design Kit available for sale? 

Our local library has a laser engraver/cutter available for public use that 
would work quite well for this task. 

Just asking. 

Jim 


-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group. 
To unsubscribe from this group and stop receiving emails from it, send an email 
to [ mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com | 
legacy-ornamental-mills+unsubscr...@googlegroups.com ] . 
To post to this group, send email to [ 
mailto:legacy-ornamental-mills@googlegroups.com | 
legacy-ornamental-mills@googlegroups.com ] . 
Visit this group at [ https://groups.google.com/group/legacy-ornamental-mills | 
https://groups.google.com/group/legacy-ornamental-mills ] . 
For more options, visit [ https://groups.google.com/d/optout | 
https://groups.google.com/d/optout ] . 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Design Kit and Router Bit Templates

[jriggen55]

To All,

I noticed that Legacy has now posted router bit profiles in the CNC portion 
of their website.  Does this mean we can now create our own router bit 
templates since they no longer make the Design Kit available for sale?

Our local library has a laser engraver/cutter available for public use that 
would work quite well for this task.

Just asking.

Jim

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: Design Kit

[viewof2]

Any pogress?

On Wednesday, September 5, 2018 at 5:58:06 AM UTC-4, Tim wrote:
>
> I've got a email into Andy on the distribution of the router bit profiles 
> 2017.  I'll update the group when I know more.
>
> Tim
> On Aug 29, 2018, at 12:23 AM, Bill Bulkeley  > wrote:
>>
>>  Agreed Tim last thing we need is any trouble with legacy I imagine they 
>> wouldn’t be too expensive to buy the profiles from them.
>>
>>  
>>
>> Bill
>>
>>  
>>
>> *From:* legacy-orna...@googlegroups.com  [mailto:
>> legacy-ornamental-mills@googlegroups.com ] *On Behalf Of *Tim 
>> Krause
>> *Sent:* Wednesday, 29 August 2018 10:06 AM
>> *To:* legacy-orna...@googlegroups.com 
>> *Cc:* Ray Leaman
>> *Subject:* Re: Design Kit
>>
>>  
>>
>> I had an agreement with Tracy Anderson to not distribute the router bit 
>> profiles in this group.  He wanted anyone in the group that is interested 
>> in the profiles in cad format to contact him.  We need to honor this 
>> agreement until otherwise instructed.
>>
>> Tim
>>
>> On Aug 28, 2018, at 3:14 PM, Bawdsey64 > 
>> wrote:
>>
>> Èb;Hi Ray
>>
>> The Legacy Design Kit comprised one to one profile templates of many of 
>> the Magnate Cutters, and they were on three or four clear plastic sheets so 
>> you could draw straight on to graph paper (supplied by Legacy).  
>>
>> The plastic templates were bought in and when Legacy were unable to get 
>> the plastic sheets produced out of house they did have a set of the 
>> profiles in an industry graphics format so you could draw using something 
>> like Coral Draw. The reason they stopped selling the product was that their 
>> supplier's Laser packed up and the Laser that the company bought to replace 
>> their old one burnt the plastic sheet when producing the Legacy Templates 
>> as it was much higher powered.
>>
>> Someone in the group should have that graphics package.
>>
>> Now I do not have it as sold my business, which was selling Legacy 
>> products in Europe, and I do not have a Legacy machine.  If you have no 
>> luck finding the graphics package get back to me and i will see if I have 
>> it on an old computer or someone I know has it.
>>
>> Regards
>>
>> Roger in UK
>>
>> Èb;
>>
>>  
>>
>> Èb;
>>
>> *From:* Ray Leaman
>>
>> *Received:* 28/08/2018 22:55:50 +01:00
>>
>> *To:* legacy-orna...@googlegroups.com 
>>
>> Thanks for your reply Dexter.  So the design kit was for making a 
>> "drawing" on paper of what the stock will look like once cut rather than 
>> applying it to the stock per se.  I assume it was for spindle turning for 
>> the most part?
>>
>>  
>>
>> Are the Magnate profiles on the attachment you sent full size or scaled 
>> down?
>>
>>  
>>
>> On Tue, Aug 28, 2018 at 5:35 PM, Dexter Bland > > wrote:
>>
>>  
>>
>> Ray,
>>
>> A design kit is no longer available from Legacy or anywhere that I am 
>> aware of. It was a clear set of templates of the router shapes that Magnate 
>> sells that you could use to draw out the cuts on scaled paper to refine 
>> your design. You could then use your drawing to lay out your cuts on the 
>> machine. Attached is a PDF of the router shapes available from Magnate.
>>
>> db
>>
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com 
>> .
>> To post to this group, send email to legacy-orna...@googlegroups.com 
>> .
>> Visit this group at 
>> https://groups.google.com/group/legacy-ornamental-mills.
>> For more options, visit https://groups.google.com/d/optout.
>>
>>  
>>
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com 
>> .
>> To post to this group, send email to legacy-orna...@googlegroups.com 
>> .
>> Visit this group at 
>> https://groups.google.com/group/legacy-ornamental-mills.
>> For more options, visit https://groups.google.com/d/optout.
>>
>>  
>>
>>
>> <http://www.avg.com/email-sign

RE: Design Kit

[Tim Krause]

I've got a email into Andy on the distribution of the router bit profiles 2017. 
 I'll update the group when I know more.

Tim

On Aug 29, 2018, 12:23 AM, at 12:23 AM, Bill Bulkeley  
wrote:
>Agreed Tim last thing we need is any trouble with legacy I imagine they
>wouldn’t be too expensive to buy the profiles from them.
>
> 
>
>Bill
>
> 
>
>From: legacy-ornamental-mills@googlegroups.com
>[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim
>Krause
>Sent: Wednesday, 29 August 2018 10:06 AM
>To: legacy-ornamental-mills@googlegroups.com
>Cc: Ray Leaman
>Subject: Re: Design Kit
>
> 
>
>I had an agreement with Tracy Anderson to not distribute the router bit
>profiles in this group.  He wanted anyone in the group that is
>interested in the profiles in cad format to contact him.  We need to
>honor this agreement until otherwise instructed.
>
>Tim
>
>
>
>On Aug 28, 2018, at 3:14 PM, Bawdsey64  wrote:
>
>Èb;Hi Ray
>
>The Legacy Design Kit comprised one to one profile templates of many of
>the Magnate Cutters, and they were on three or four clear plastic
>sheets so you could draw straight on to graph paper (supplied by
>Legacy).  
>
>The plastic templates were bought in and when Legacy were unable to get
>the plastic sheets produced out of house they did have a set of the
>profiles in an industry graphics format so you could draw using
>something like Coral Draw. The reason they stopped selling the product
>was that their supplier's Laser packed up and the Laser that the
>company bought to replace their old one burnt the plastic sheet when
>producing the Legacy Templates as it was much higher powered.
>
>Someone in the group should have that graphics package.
>
>Now I do not have it as sold my business, which was selling Legacy
>products in Europe, and I do not have a Legacy machine.  If you have no
>luck finding the graphics package get back to me and i will see if I
>have it on an old computer or someone I know has it.
>
>Regards
>
>Roger in UK
>
>Èb;
>
> 
>
>Èb;
>
>From: Ray Leaman
>
>Received: 28/08/2018 22:55:50 +01:00
>
>To: legacy-ornamental-mills@googlegroups.com
>
>Thanks for your reply Dexter.  So the design kit was for making a
>"drawing" on paper of what the stock will look like once cut rather
>than applying it to the stock per se.  I assume it was for spindle
>turning for the most part?
>
> 
>
>Are the Magnate profiles on the attachment you sent full size or scaled
>down?
>
> 
>
>On Tue, Aug 28, 2018 at 5:35 PM, Dexter Bland 
>wrote:
>
> 
>
>Ray,
>
>A design kit is no longer available from Legacy or anywhere that I am
>aware of. It was a clear set of templates of the router shapes that
>Magnate sells that you could use to draw out the cuts on scaled paper
>to refine your design. You could then use your drawing to lay out your
>cuts on the machine. Attached is a PDF of the router shapes available
>from Magnate.
>
>db
>
>-- 
>You received this message because you are subscribed to the Google
>Groups "Legacy Ornamental Mills" group.
>To unsubscribe from this group and stop receiving emails from it, send
>an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>To post to this group, send email to
>legacy-ornamental-mills@googlegroups.com.
>Visit this group at
>https://groups.google.com/group/legacy-ornamental-mills.
>For more options, visit https://groups.google.com/d/optout.
>
> 
>
>-- 
>You received this message because you are subscribed to the Google
>Groups "Legacy Ornamental Mills" group.
>To unsubscribe from this group and stop receiving emails from it, send
>an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>To post to this group, send email to
>legacy-ornamental-mills@googlegroups.com.
>Visit this group at
>https://groups.google.com/group/legacy-ornamental-mills.
>For more options, visit https://groups.google.com/d/optout.
>
> 
>
>
><http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
>
>
>Virus-free. 
><http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
>www.avg.com 
>
>-- 
>You received this message because you are subscribed to the Google
>Groups "Legacy Ornamental Mills" group.
>To unsubscribe from this group and stop receiving emails from it, send
>an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>To post to this group, send email to
>legacy-ornamental-mills@googlegroups.com.
>Visit this group at
>https://groups.google.com/group/legacy-ornamental-mills.
>For more opt

RE: Design Kit

[Tim Krause]

That file has been available for a while. It's for use with a cad programs.  
You can turn the profiles into library components to use.

What is not is an exact copy of the templates that where offered in the past.  

The way I see it now, is the router bit profiles could be used to manufacture 
router bits and that was the primary reason that we were not to make the file 
available.  

The file is not blocked behind passworded area and is available to all with a 
cad programs to make a working template to have laser cut.  


Tim

On Sep 4, 2018, 4:26 PM, at 4:26 PM, Bill Bulkeley  
wrote:
>I was looking at legacys sight 
>https://lwmcnc.com/customer-support-files/
>
> 
>
>The design kit profiles are there I just clicked on them followed the
>prompts and was looking at them all
>
> 
>
>Bill
>
> 
>
>From: Bill Bulkeley [mailto:bulke...@mmnet.com.au] 
>Sent: Friday, 31 August 2018 12:19 PM
>To: 'legacy-ornamental-mills@googlegroups.com'
>Subject: RE: Design Kit
>
> 
>
>Go to the magnate sight copy and paste the picture of the router bit
>you want, enlarge or reduce it in size till it is the correct size to
>match its recorded cutting dia print it, cut it out with scissors stick
>it to your piece of acrylic and cut the shape with your scroll saw or
>laser that’s what I would do if I didn’t already own a design kit
>
>And couldn’t buy the profiles.
>
>But I can’t see why legacy would not supply the profiles to make your
>own design kit they no longer support the old mills and you’re not
>making it to sell its just for your own privet use so they have
>absolutely nothing too loose and they are always saying they have
>wonderful customer support so it should be all good .
>
>Our group has had differences of opinions with legacy in the past but
>time has passed and I would like to think we all have moved on now and
>bear each other no ill will I for one have.
>
> 
>
>Bill
>
> 
>
> 
>
> 
>
> 
>
>From: legacy-ornamental-mills@googlegroups.com
>[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of
>view...@gmail.com
>Sent: Friday, 31 August 2018 10:10 AM
>To: Legacy Ornamental Mills
>Subject: Re: Design Kit
>
> 
>
>So-o-o.  If you can't get the design kit anywhere and you have an
>agreement with Legacy not to put it out on line and they won't sell it
>to those with manual machines (ie they want someone to call them for a
>cad version???)  what are people who just got manual legacy ornamental
>mills supposed to do?  I do my own drawing having learned engineering
>drawing while developing my patternmaking skills.  I don't use cad. 
>Seems odd to me that Legacy controls who can get Magnate cutter
>profiles. Obviously you have reasons for the agreement with Tracy. 
>Seems to me though that they should be more willing to help out
>historical owners of legacy manual mills and users groups if it is
>something they have readily available.  What am I misising?. 
>
> 
>
> at 8:06:20 PM UTC-4, Tim wrote:
>
>I had an agreement with Tracy Anderson to not distribute the router bit
>profiles in this group.  He wanted anyone in the group that is
>interested in the profiles in cad format to contact him.  We need to
>honor this agreement until otherwise instructed.
>
>Tim
>
>On Aug 28, 2018, at 3:14 PM, Bawdsey64 
>> wrote:
>
>Èb;Hi Ray
>
>The Legacy Design Kit comprised one to one profile templates of many of
>the Magnate Cutters, and they were on three or four clear plastic
>sheets so you could draw straight on to graph paper (supplied by
>Legacy).  
>
>The plastic templates were bought in and when Legacy were unable to get
>the plastic sheets produced out of house they did have a set of the
>profiles in an industry graphics format so you could draw using
>something like Coral Draw. The reason they stopped selling the product
>was that their supplier's Laser packed up and the Laser that the
>company bought to replace their old one burnt the plastic sheet when
>producing the Legacy Templates as it was much higher powered.
>
>Someone in the group should have that graphics package.
>
>Now I do not have it as sold my business, which was selling Legacy
>products in Europe, and I do not have a Legacy machine.  If you have no
>luck finding the graphics package get back to me and i will see if I
>have it on an old computer or someone I know has it.
>
>Regards
>
>Roger in UK
>
>Èb;
>
> 
>
>Èb;
>
>From: Ray Leaman
>
>Received: 28/08/2018 22:55:50 +01:00
>
>To: legacy-orna...@googlegroups.com  
>
>Thanks for your reply Dexter.  So the design kit was for making a
>"drawing" on paper of what the stock will look like once cut rather
>than applying i

RE: Design Kit

[Bill Bulkeley]

I was looking at legacys sight  https://lwmcnc.com/customer-support-files/

 

The design kit profiles are there I just clicked on them followed the prompts 
and was looking at them all

 

Bill

 

From: Bill Bulkeley [mailto:bulke...@mmnet.com.au] 
Sent: Friday, 31 August 2018 12:19 PM
To: 'legacy-ornamental-mills@googlegroups.com'
Subject: RE: Design Kit

 

Go to the magnate sight copy and paste the picture of the router bit you want, 
enlarge or reduce it in size till it is the correct size to match its recorded 
cutting dia print it, cut it out with scissors stick it to your piece of 
acrylic and cut the shape with your scroll saw or laser that’s what I would do 
if I didn’t already own a design kit

And couldn’t buy the profiles.

But I can’t see why legacy would not supply the profiles to make your own 
design kit they no longer support the old mills and you’re not making it to 
sell its just for your own privet use so they have absolutely nothing too loose 
and they are always saying they have wonderful customer support so it should be 
all good .

Our group has had differences of opinions with legacy in the past but time has 
passed and I would like to think we all have moved on now and bear each other 
no ill will I for one have.

 

Bill

 

 

 

 

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of view...@gmail.com
Sent: Friday, 31 August 2018 10:10 AM
To: Legacy Ornamental Mills
Subject: Re: Design Kit

 

So-o-o.  If you can't get the design kit anywhere and you have an agreement 
with Legacy not to put it out on line and they won't sell it to those with 
manual machines (ie they want someone to call them for a cad version???)  what 
are people who just got manual legacy ornamental mills supposed to do?  I do my 
own drawing having learned engineering drawing while developing my 
patternmaking skills.  I don't use cad.  Seems odd to me that Legacy controls 
who can get Magnate cutter profiles. Obviously you have reasons for the 
agreement with Tracy.  Seems to me though that they should be more willing to 
help out historical owners of legacy manual mills and users groups if it is 
something they have readily available.  What am I misising?. 

 

 at 8:06:20 PM UTC-4, Tim wrote:

I had an agreement with Tracy Anderson to not distribute the router bit 
profiles in this group.  He wanted anyone in the group that is interested in 
the profiles in cad format to contact him.  We need to honor this agreement 
until otherwise instructed.

Tim

On Aug 28, 2018, at 3:14 PM, Bawdsey64  > wrote:

Èb;Hi Ray

The Legacy Design Kit comprised one to one profile templates of many of the 
Magnate Cutters, and they were on three or four clear plastic sheets so you 
could draw straight on to graph paper (supplied by Legacy).  

The plastic templates were bought in and when Legacy were unable to get the 
plastic sheets produced out of house they did have a set of the profiles in an 
industry graphics format so you could draw using something like Coral Draw. The 
reason they stopped selling the product was that their supplier's Laser packed 
up and the Laser that the company bought to replace their old one burnt the 
plastic sheet when producing the Legacy Templates as it was much higher powered.

Someone in the group should have that graphics package.

Now I do not have it as sold my business, which was selling Legacy products in 
Europe, and I do not have a Legacy machine.  If you have no luck finding the 
graphics package get back to me and i will see if I have it on an old computer 
or someone I know has it.

Regards

Roger in UK

Èb;

 

Èb;

From: Ray Leaman

Received: 28/08/2018 22:55:50 +01:00

To: legacy-orna...@googlegroups.com  

Thanks for your reply Dexter.  So the design kit was for making a "drawing" on 
paper of what the stock will look like once cut rather than applying it to the 
stock per se.  I assume it was for spindle turning for the most part?

 

Are the Magnate profiles on the attachment you sent full size or scaled down?

 

On Tue, Aug 28, 2018 at 5:35 PM, Dexter Bland  
> wrote:

 

Ray,

A design kit is no longer available from Legacy or anywhere that I am aware of. 
It was a clear set of templates of the router shapes that Magnate sells that 
you could use to draw out the cuts on scaled paper to refine your design. You 
could then use your drawing to lay out your cuts on the machine. Attached is a 
PDF of the router shapes available from Magnate.

db

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com  .
To post to this group, send email to legacy-orna...@googlegroups.com 
 .
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google

Re: Design Kit

[Richard Ellis]

Roger
I have the complete design kit, If anyone wants to see it they will have to 
visit me, here in the U.K.
If I were to send it via. post  it would likely to get lost.
Legacy
I would never try to buy machine from them,  " History often repeats 
it'self "
Richard

On Saturday, August 25, 2018 at 8:23:03 AM UTC+1, Richard Ellis wrote:
>
> I have the Legacy Design kit, and have never used it- it came with my 
> Revo Craftsman which is very useful. Great tool.
> A great pity that the designers at Legacy did not follow it up with larger 
> models on the same principle.
> Back to the Design Kit , what use is it if I can't buy Magnate Cutters 
> here in the U.K.
> Does any one want it, here in the U.K. only ? ? ?
> Richard
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

RE: Design Kit

[Bill Bulkeley]

Go to the magnate sight copy and paste the picture of the router bit you want, 
enlarge or reduce it in size till it is the correct size to match its recorded 
cutting dia print it, cut it out with scissors stick it to your piece of 
acrylic and cut the shape with your scroll saw or laser that’s what I would do 
if I didn’t already own a design kit

And couldn’t buy the profiles.

But I can’t see why legacy would not supply the profiles to make your own 
design kit they no longer support the old mills and you’re not making it to 
sell its just for your own privet use so they have absolutely nothing too loose 
and they are always saying they have wonderful customer support so it should be 
all good .

Our group has had differences of opinions with legacy in the past but time has 
passed and I would like to think we all have moved on now and bear each other 
no ill will I for one have.

 

Bill

 

 

 

 

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of view...@gmail.com
Sent: Friday, 31 August 2018 10:10 AM
To: Legacy Ornamental Mills
Subject: Re: Design Kit

 

So-o-o.  If you can't get the design kit anywhere and you have an agreement 
with Legacy not to put it out on line and they won't sell it to those with 
manual machines (ie they want someone to call them for a cad version???)  what 
are people who just got manual legacy ornamental mills supposed to do?  I do my 
own drawing having learned engineering drawing while developing my 
patternmaking skills.  I don't use cad.  Seems odd to me that Legacy controls 
who can get Magnate cutter profiles. Obviously you have reasons for the 
agreement with Tracy.  Seems to me though that they should be more willing to 
help out historical owners of legacy manual mills and users groups if it is 
something they have readily available.  What am I misising?. 

 

 at 8:06:20 PM UTC-4, Tim wrote:

I had an agreement with Tracy Anderson to not distribute the router bit 
profiles in this group.  He wanted anyone in the group that is interested in 
the profiles in cad format to contact him.  We need to honor this agreement 
until otherwise instructed.

Tim



On Aug 28, 2018, at 3:14 PM, Bawdsey64  > wrote:

Èb;Hi Ray

The Legacy Design Kit comprised one to one profile templates of many of the 
Magnate Cutters, and they were on three or four clear plastic sheets so you 
could draw straight on to graph paper (supplied by Legacy).  

The plastic templates were bought in and when Legacy were unable to get the 
plastic sheets produced out of house they did have a set of the profiles in an 
industry graphics format so you could draw using something like Coral Draw. The 
reason they stopped selling the product was that their supplier's Laser packed 
up and the Laser that the company bought to replace their old one burnt the 
plastic sheet when producing the Legacy Templates as it was much higher powered.

Someone in the group should have that graphics package.

Now I do not have it as sold my business, which was selling Legacy products in 
Europe, and I do not have a Legacy machine.  If you have no luck finding the 
graphics package get back to me and i will see if I have it on an old computer 
or someone I know has it.

Regards

Roger in UK

Èb;

 

Èb;

From: Ray Leaman

Received: 28/08/2018 22:55:50 +01:00

To: legacy-orna...@googlegroups.com  

Thanks for your reply Dexter.  So the design kit was for making a "drawing" on 
paper of what the stock will look like once cut rather than applying it to the 
stock per se.  I assume it was for spindle turning for the most part?

 

Are the Magnate profiles on the attachment you sent full size or scaled down?

 

On Tue, Aug 28, 2018 at 5:35 PM, Dexter Bland  
> wrote:

 

Ray,

A design kit is no longer available from Legacy or anywhere that I am aware of. 
It was a clear set of templates of the router shapes that Magnate sells that 
you could use to draw out the cuts on scaled paper to refine your design. You 
could then use your drawing to lay out your cuts on the machine. Attached is a 
PDF of the router shapes available from Magnate.

db

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com  .
To post to this group, send email to legacy-orna...@googlegroups.com 
 .
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com  .
To post to this group, send email to legacy-orna...@googlegroups.com 
 .
Visit thi

Re: Design Kit

[Tim Krause]

The agreement stemmed from the concerns of competition from others in the 
market.  The router bits that Magnate sell are Legacy's designs and only 
manufactured by Magnate.  Having the profiles out there in dxf format simply 
makes it too easy to copy them.  At least this was part of the original 
conversation that lead to the agreement. It may be time to possibly renegotiate?

If you contact Tracy Anderson at Legacy and ask for the router bit profiles in 
cad format, you can find free cad programs to make your own templates with the 
bits you own.  Do you have a paper or CD/DVD catalog from Magnate?  They have 
very clear dimensions of each Legacy bit they sell. You could draw each profile 
with that information.  I realize this is not easy.  

I'll give Tracy or Andy next week and see what the current thought process is.

Tim



On Aug 30, 2018, 5:09 PM, at 5:09 PM, view...@gmail.com wrote:
>So-o-o.  If you can't get the design kit anywhere and you have an
>agreement 
>with Legacy not to put it out on line and they won't sell it to those
>with 
>manual machines (ie they want someone to call them for a cad
>version???)  
>what are people who just got manual legacy ornamental mills supposed to
>
>do?  I do my own drawing having learned engineering drawing while 
>developing my patternmaking skills.  I don't use cad.  Seems odd to me
>that 
>Legacy controls who can get Magnate cutter profiles. Obviously you have
>
>reasons for the agreement with Tracy.  Seems to me though that they
>should 
>be more willing to help out historical owners of legacy manual mills
>and 
>users groups if it is something they have readily available.  What am I
>
>misising?. 
>
> at 8:06:20 PM UTC-4, Tim wrote:
>>
>> I had an agreement with Tracy Anderson to not distribute the router
>bit 
>> profiles in this group.  He wanted anyone in the group that is
>interested 
>> in the profiles in cad format to contact him.  We need to honor this 
>> agreement until otherwise instructed.
>>
>> Tim
>>
>>
>> On Aug 28, 2018, at 3:14 PM, Bawdsey64 > 
>> wrote:
>>>
>>> Èb;Hi Ray
>>>
>>> The Legacy Design Kit comprised one to one profile templates of many
>of 
>>> the Magnate Cutters, and they were on three or four clear plastic
>sheets so 
>>> you could draw straight on to graph paper (supplied by Legacy).  
>>>
>>> The plastic templates were bought in and when Legacy were unable to
>get 
>>> the plastic sheets produced out of house they did have a set of the 
>>> profiles in an industry graphics format so you could draw using
>something 
>>> like Coral Draw. The reason they stopped selling the product was
>that their 
>>> supplier's Laser packed up and the Laser that the company bought to
>replace 
>>> their old one burnt the plastic sheet when producing the Legacy
>Templates 
>>> as it was much higher powered.
>>>
>>> Someone in the group should have that graphics package.
>>>
>>> Now I do not have it as sold my business, which was selling Legacy 
>>> products in Europe, and I do not have a Legacy machine.  If you have
>no 
>>> luck finding the graphics package get back to me and i will see if I
>have 
>>> it on an old computer or someone I know has it.
>>>
>>> Regards
>>>
>>> Roger in UK
>>>
>>> Èb;
>>>
>>>
>>> Èb;
>>> From: Ray Leaman
>>> Received: 28/08/2018 22:55:50 +01:00
>>> To: legacy-orna...@googlegroups.com 
>>> Thanks for your reply Dexter.  So the design kit was for making a 
>>> "drawing" on paper of what the stock will look like once cut rather
>than 
>>> applying it to the stock per se.  I assume it was for spindle
>turning for 
>>> the most part?
>>>
>>> Are the Magnate profiles on the attachment you sent full size or
>scaled 
>>> down?
>>>
>>> On Tue, Aug 28, 2018 at 5:35 PM, Dexter Bland >> > wrote:
>>>
>>> Ray,
>>> A design kit is no longer available from Legacy or anywhere that I
>am 
>>> aware of. It was a clear set of templates of the router shapes that
>Magnate 
>>> sells that you could use to draw out the cuts on scaled paper to
>refine 
>>> your design. You could then use your drawing to lay out your cuts on
>the 
>>> machine. Attached is a PDF of the router shapes available from
>Magnate.
>>> db
>>>
>>> -- 
>>> You received this message because you are subscribed to the Google
>Groups 
>>> "Legacy Ornamental Mills" 

Re: Design Kit

[viewof2]

So-o-o.  If you can't get the design kit anywhere and you have an agreement 
with Legacy not to put it out on line and they won't sell it to those with 
manual machines (ie they want someone to call them for a cad version???)  
what are people who just got manual legacy ornamental mills supposed to 
do?  I do my own drawing having learned engineering drawing while 
developing my patternmaking skills.  I don't use cad.  Seems odd to me that 
Legacy controls who can get Magnate cutter profiles. Obviously you have 
reasons for the agreement with Tracy.  Seems to me though that they should 
be more willing to help out historical owners of legacy manual mills and 
users groups if it is something they have readily available.  What am I 
misising?. 

 at 8:06:20 PM UTC-4, Tim wrote:
>
> I had an agreement with Tracy Anderson to not distribute the router bit 
> profiles in this group.  He wanted anyone in the group that is interested 
> in the profiles in cad format to contact him.  We need to honor this 
> agreement until otherwise instructed.
>
> Tim
>
>
> On Aug 28, 2018, at 3:14 PM, Bawdsey64 > 
> wrote:
>>
>> Èb;Hi Ray
>>
>> The Legacy Design Kit comprised one to one profile templates of many of 
>> the Magnate Cutters, and they were on three or four clear plastic sheets so 
>> you could draw straight on to graph paper (supplied by Legacy).  
>>
>> The plastic templates were bought in and when Legacy were unable to get 
>> the plastic sheets produced out of house they did have a set of the 
>> profiles in an industry graphics format so you could draw using something 
>> like Coral Draw. The reason they stopped selling the product was that their 
>> supplier's Laser packed up and the Laser that the company bought to replace 
>> their old one burnt the plastic sheet when producing the Legacy Templates 
>> as it was much higher powered.
>>
>> Someone in the group should have that graphics package.
>>
>> Now I do not have it as sold my business, which was selling Legacy 
>> products in Europe, and I do not have a Legacy machine.  If you have no 
>> luck finding the graphics package get back to me and i will see if I have 
>> it on an old computer or someone I know has it.
>>
>> Regards
>>
>> Roger in UK
>>
>> Èb;
>>
>>
>> Èb;
>> From: Ray Leaman
>> Received: 28/08/2018 22:55:50 +01:00
>> To: legacy-orna...@googlegroups.com 
>> Thanks for your reply Dexter.  So the design kit was for making a 
>> "drawing" on paper of what the stock will look like once cut rather than 
>> applying it to the stock per se.  I assume it was for spindle turning for 
>> the most part?
>>
>> Are the Magnate profiles on the attachment you sent full size or scaled 
>> down?
>>
>> On Tue, Aug 28, 2018 at 5:35 PM, Dexter Bland > > wrote:
>>
>> Ray,
>> A design kit is no longer available from Legacy or anywhere that I am 
>> aware of. It was a clear set of templates of the router shapes that Magnate 
>> sells that you could use to draw out the cuts on scaled paper to refine 
>> your design. You could then use your drawing to lay out your cuts on the 
>> machine. Attached is a PDF of the router shapes available from Magnate.
>> db
>>
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com 
>> .
>> To post to this group, send email to legacy-orna...@googlegroups.com 
>> .
>> Visit this group at https://groups.google.com/
>> group/legacy-ornamental-mills.
>> For more options, visit https://groups.google.com/d/optout.
>>
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com 
>> .
>> To post to this group, send email to legacy-orna...@googlegroups.com 
>> .
>> Visit this group at 
>> https://groups.google.com/group/legacy-ornamental-mills.
>> For more options, visit https://groups.google.com/d/optout.
>>
>>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

RE: Design Kit

[Bill Bulkeley]

 Agreed Tim last thing we need is any trouble with legacy I imagine they 
wouldn’t be too expensive to buy the profiles from them.

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim Krause
Sent: Wednesday, 29 August 2018 10:06 AM
To: legacy-ornamental-mills@googlegroups.com
Cc: Ray Leaman
Subject: Re: Design Kit

 

I had an agreement with Tracy Anderson to not distribute the router bit 
profiles in this group.  He wanted anyone in the group that is interested in 
the profiles in cad format to contact him.  We need to honor this agreement 
until otherwise instructed.

Tim



On Aug 28, 2018, at 3:14 PM, Bawdsey64  wrote:

Èb;Hi Ray

The Legacy Design Kit comprised one to one profile templates of many of the 
Magnate Cutters, and they were on three or four clear plastic sheets so you 
could draw straight on to graph paper (supplied by Legacy).  

The plastic templates were bought in and when Legacy were unable to get the 
plastic sheets produced out of house they did have a set of the profiles in an 
industry graphics format so you could draw using something like Coral Draw. The 
reason they stopped selling the product was that their supplier's Laser packed 
up and the Laser that the company bought to replace their old one burnt the 
plastic sheet when producing the Legacy Templates as it was much higher powered.

Someone in the group should have that graphics package.

Now I do not have it as sold my business, which was selling Legacy products in 
Europe, and I do not have a Legacy machine.  If you have no luck finding the 
graphics package get back to me and i will see if I have it on an old computer 
or someone I know has it.

Regards

Roger in UK

Èb;

 

Èb;

From: Ray Leaman

Received: 28/08/2018 22:55:50 +01:00

To: legacy-ornamental-mills@googlegroups.com

Thanks for your reply Dexter.  So the design kit was for making a "drawing" on 
paper of what the stock will look like once cut rather than applying it to the 
stock per se.  I assume it was for spindle turning for the most part?

 

Are the Magnate profiles on the attachment you sent full size or scaled down?

 

On Tue, Aug 28, 2018 at 5:35 PM, Dexter Bland  wrote:

 

Ray,

A design kit is no longer available from Legacy or anywhere that I am aware of. 
It was a clear set of templates of the router shapes that Magnate sells that 
you could use to draw out the cuts on scaled paper to refine your design. You 
could then use your drawing to lay out your cuts on the machine. Attached is a 
PDF of the router shapes available from Magnate.

db

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

 


 
<http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
 

Virus-free.  
<http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
 www.avg.com 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: Design Kit

[Tim Krause]

I had an agreement with Tracy Anderson to not distribute the router bit 
profiles in this group.  He wanted anyone in the group that is interested in 
the profiles in cad format to contact him.  We need to honor this agreement 
until otherwise instructed.

Tim




On Aug 28, 2018, 3:14 PM, at 3:14 PM, Bawdsey64  wrote:
>Hi Ray
>The Legacy Design Kit comprised one to one profile templates of many of
>the Magnate Cutters, and they were on three or four clear plastic
>sheets so you could draw straight on to graph paper (supplied by
>Legacy).  
>The plastic templates were bought in and when Legacy were unable to get
>the plastic sheets produced out of house they did have a set of the
>profiles in an industry graphics format so you could draw using
>something like Coral Draw. The reason they stopped selling the product
>was that their supplier's Laser packed up and the Laser that the
>company bought to replace their old one burnt the plastic sheet when
>producing the Legacy Templates as it was much higher powered.
>Someone in the group should have that graphics package.
>Now I do not have it as sold my business, which was selling Legacy
>products in Europe, and I do not have a Legacy machine.  If you have no
>luck finding the graphics package get back to me and i will see if I
>have it on an old computer or someone I know has it.
>Regards
>Roger in UK
>
>
>
>
>
>
>From: Ray Leaman
>Received: 28/08/2018 22:55:50 +01:00
>To: legacy-ornamental-mills@googlegroups.com
>Thanks for your reply Dexter.  So the design kit was for making a
>"drawing" on paper of what the stock will look like once cut rather
>than applying it to the stock per se.  I assume it was for spindle
>turning for the most part?
>
>Are the Magnate profiles on the attachment you sent full size or scaled
>down?
>
>On Tue, Aug 28, 2018 at 5:35 PM, Dexter Bland [mailto:dexterbl...@gmail.com]> wrote:
>
>
>Ray,
>A design kit is no longer available from Legacy or anywhere that I am
>aware of. It was a clear set of templates of the router shapes that
>Magnate sells that you could use to draw out the cuts on scaled paper
>to refine your design. You could then use your drawing to lay out your
>cuts on the machine. Attached is a PDF of the router shapes available
>from Magnate.
>db
>
>--
>You received this message because you are subscribed to the Google
>Groups "Legacy Ornamental Mills" group.
>To unsubscribe from this group and stop receiving emails from it, send
>an email to legacy-ornamental-mills+unsubscr...@googlegroups.com
>[mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com].
>To post to this group, send email
>to legacy-ornamental-mills@googlegroups.com
>[mailto:legacy-ornamental-mills@googlegroups.com].
>Visit this group
>at https://groups.google.com/group/legacy-ornamental-mills
>[https://groups.google.com/group/legacy-ornamental-mills].
>For more options, visit https://groups.google.com/d/optout
>[https://groups.google.com/d/optout].
>
>
>--
>You received this message because you are subscribed to the Google
>Groups "Legacy Ornamental Mills" group.
>To unsubscribe from this group and stop receiving emails from it, send
>an email to legacy-ornamental-mills+unsubscr...@googlegroups.com
>[mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com].
>To post to this group, send email
>to legacy-ornamental-mills@googlegroups.com
>[mailto:legacy-ornamental-mills@googlegroups.com].
>Visit this group
>at https://groups.google.com/group/legacy-ornamental-mills
>[https://groups.google.com/group/legacy-ornamental-mills].
>For more options, visit https://groups.google.com/d/optout
>[https://groups.google.com/d/optout].
>
>-- 
>You received this message because you are subscribed to the Google
>Groups "Legacy Ornamental Mills" group.
>To unsubscribe from this group and stop receiving emails from it, send
>an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>To post to this group, send email to
>legacy-ornamental-mills@googlegroups.com.
>Visit this group at
>https://groups.google.com/group/legacy-ornamental-mills.
>For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

RE: Design Kit

[Bill Bulkeley]

The design kit has saved me many trial and errors on timber, I know you can do 
it all on computer now days but the design kit produces it full scale so I can 
pin it up and get a real feel of how it looks, like a 4 poster bed

I was going to do for someone once and then they found the ceiling in their 
bedroom was too low and it didn’t look right. saved me hours of work for 
nothing they went with a lower polished brass bed instead I wasn’t worried it 
was a freebee for friends all that was waisted was a sheet of paper and not 
even that I rubbed the pencil off and used it again for another projects. 
Anyone who is a scroll sawer could make their own design kit

And there are free programs out there for printing your own graph paper of 
different sizes. or find someone with a laser cutter. Cheaper than buying a 
expensive computer program which I probably couldn’t use without a lot of 
learning I like the old school approach. 

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Ray Leaman
Sent: Wednesday, 29 August 2018 8:25 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Design Kit

 

Thanks. Pictures are truly worth a 1,000 words.

 

On Tue, Aug 28, 2018 at 6:17 PM, Bill Bulkeley  wrote:

Here is a pic of the design kit it comes with graph paper as you see in the pic

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Ray Leaman
Sent: Tuesday, 28 August 2018 11:57 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Design Kit

 

Newbie here.  What's a design kit?  How is it used?  Is it used for all manual 
model LOM's? How would somebody get one today?

 

Thanks

 

On Tue, Aug 28, 2018 at 2:14 AM, Richard Ellis  wrote:

Bill

I have taken your advice and decided to keep it.

I apologise to all who have sent emails and replied to my post on this site

At present I am having to answer stupid questions from the purchasers solicitor 
via my solicitor--- an extremely slow   process. I will now answer 
all the emails that I received re: the kit

Richard

On Saturday, August 25, 2018 at 11:25:17 AM UTC+1, aussiman wrote:

Don’t be too quick to get rid of it, magnate ships internationally I can buy a 
magnate router bit with shipping cheaper than I can buy one here in Australia.

I use my design kit all the time when I’m designing a job with a spiral on it 

I will even buy it from you and I already own one.

 

Bill

 

From: legacy-orna...@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Richard Ellis
Sent: Saturday, 25 August 2018 5:23 PM
To: Legacy Ornamental Mills
Subject: Design Kit

 

I have the Legacy Design kit, and have never used it- it came with my Revo 
Craftsman which is very useful. Great tool.

A great pity that the designers at Legacy did not follow it up with larger 
models on the same principle.

Back to the Design Kit , what use is it if I can't buy Magnate Cutters here in 
the U.K.

Does any one want it, here in the U.K. only ? ? ?

Richard

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills%2bunsubscr...@googlegroups.com> .
To post to this group, send email to legacy-orna...@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

 


 
<http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
 

Virus-free.  
<http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
 www.avg.com 

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

 


 
<http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emai

Re: Design Kit

[Ray Leaman]

Thanks. Pictures are truly worth a 1,000 words.

On Tue, Aug 28, 2018 at 6:17 PM, Bill Bulkeley 
wrote:

> Here is a pic of the design kit it comes with graph paper as you see in
> the pic
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com [mailto:
> legacy-ornamental-mills@googlegroups.com] *On Behalf Of *Ray Leaman
> *Sent:* Tuesday, 28 August 2018 11:57 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Design Kit
>
>
>
> Newbie here.  What's a design kit?  How is it used?  Is it used for all
> manual model LOM's? How would somebody get one today?
>
>
>
> Thanks
>
>
>
> On Tue, Aug 28, 2018 at 2:14 AM, Richard Ellis 
> wrote:
>
> Bill
>
> *I have taken your advice and decided to keep it.*
>
> I apologise to all who have sent emails and replied to my post on this site
>
> At present I am having to answer stupid questions from the purchasers
> solicitor via my solicitor--- an extremely slow   process. I
> will now answer all the emails that I received re: the kit
>
> Richard
>
> On Saturday, August 25, 2018 at 11:25:17 AM UTC+1, aussiman wrote:
>
> Don’t be too quick to get rid of it, magnate ships internationally I can
> buy a magnate router bit with shipping cheaper than I can buy one here in
> Australia.
>
> I use my design kit all the time when I’m designing a job with a spiral on
> it
>
> I will even buy it from you and I already own one.
>
>
>
> Bill
>
>
>
> *From:* legacy-orna...@googlegroups.com [mailto:legacy-ornamental-
> mi...@googlegroups.com] *On Behalf Of *Richard Ellis
> *Sent:* Saturday, 25 August 2018 5:23 PM
> *To:* Legacy Ornamental Mills
> *Subject:* Design Kit
>
>
>
> I have the Legacy Design kit, and have never used it- it came with my
> Revo Craftsman which is very useful. Great tool.
>
> A great pity that the designers at Legacy did not follow it up with larger
> models on the same principle.
>
> Back to the Design Kit , what use is it if I can't buy Magnate Cutters
> here in the U.K.
>
> Does any one want it, here in the U.K. only ? ? ?
>
> Richard
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to legacy-orna...@googlegroups.com.
> Visit this group at https://groups.google.com/
> group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/d/optout.
>
>
>
>
> <http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
>
> Virus-free. www.avg.com
> <http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
>
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to legacy-ornamental-mills@
> googlegroups.com.
> Visit this group at https://groups.google.com/
> group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/d/optout.
>
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to legacy-ornamental-mills@
> googlegroups.com.
> Visit this group at https://groups.google.com/
> group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/d/optout.
>
>
>
>
> <http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
>
> Virus-free. www.avg.com
> <http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
>
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to legacy-ornamental-mills@
> googlegroups.com.
> Visit this group at https://groups.google.com/
> group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

RE: Design Kit

[Bill Bulkeley]

Here is a pic of the design kit it comes with graph paper as you see in the pic

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Ray Leaman
Sent: Tuesday, 28 August 2018 11:57 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Design Kit

 

Newbie here.  What's a design kit?  How is it used?  Is it used for all manual 
model LOM's? How would somebody get one today?

 

Thanks

 

On Tue, Aug 28, 2018 at 2:14 AM, Richard Ellis  wrote:

Bill

I have taken your advice and decided to keep it.

I apologise to all who have sent emails and replied to my post on this site

At present I am having to answer stupid questions from the purchasers solicitor 
via my solicitor--- an extremely slow   process. I will now answer 
all the emails that I received re: the kit

Richard

On Saturday, August 25, 2018 at 11:25:17 AM UTC+1, aussiman wrote:

Don’t be too quick to get rid of it, magnate ships internationally I can buy a 
magnate router bit with shipping cheaper than I can buy one here in Australia.

I use my design kit all the time when I’m designing a job with a spiral on it 

I will even buy it from you and I already own one.

 

Bill

 

From: legacy-orna...@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Richard Ellis
Sent: Saturday, 25 August 2018 5:23 PM
To: Legacy Ornamental Mills
Subject: Design Kit

 

I have the Legacy Design kit, and have never used it- it came with my Revo 
Craftsman which is very useful. Great tool.

A great pity that the designers at Legacy did not follow it up with larger 
models on the same principle.

Back to the Design Kit , what use is it if I can't buy Magnate Cutters here in 
the U.K.

Does any one want it, here in the U.K. only ? ? ?

Richard

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-orna...@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

 


 
<http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
 

Virus-free.  
<http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
 www.avg.com 

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

 


 
<http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
 

Virus-free.  
<http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
 www.avg.com 

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: Design Kit

[Bawdsey64]

Hi Ray
The Legacy Design Kit comprised one to one profile templates of many of the 
Magnate Cutters, and they were on three or four clear plastic sheets so you 
could draw straight on to graph paper (supplied by Legacy).  
The plastic templates were bought in and when Legacy were unable to get the 
plastic sheets produced out of house they did have a set of the profiles in an 
industry graphics format so you could draw using something like Coral Draw. The 
reason they stopped selling the product was that their supplier's Laser packed 
up and the Laser that the company bought to replace their old one burnt the 
plastic sheet when producing the Legacy Templates as it was much higher powered.
Someone in the group should have that graphics package.
Now I do not have it as sold my business, which was selling Legacy products in 
Europe, and I do not have a Legacy machine.  If you have no luck finding the 
graphics package get back to me and i will see if I have it on an old computer 
or someone I know has it.
Regards
Roger in UK






From: Ray Leaman
Received: 28/08/2018 22:55:50 +01:00
To: legacy-ornamental-mills@googlegroups.com
Thanks for your reply Dexter.  So the design kit was for making a "drawing" on 
paper of what the stock will look like once cut rather than applying it to the 
stock per se.  I assume it was for spindle turning for the most part?

Are the Magnate profiles on the attachment you sent full size or scaled down?

On Tue, Aug 28, 2018 at 5:35 PM, Dexter Bland mailto:dexterbl...@gmail.com]> wrote:


Ray,
A design kit is no longer available from Legacy or anywhere that I am aware of. 
It was a clear set of templates of the router shapes that Magnate sells that 
you could use to draw out the cuts on scaled paper to refine your design. You 
could then use your drawing to lay out your cuts on the machine. Attached is a 
PDF of the router shapes available from Magnate.
db

--
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
[mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com].
To post to this group, send email to legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com].
Visit this group at https://groups.google.com/group/legacy-ornamental-mills 
[https://groups.google.com/group/legacy-ornamental-mills].
For more options, visit https://groups.google.com/d/optout 
[https://groups.google.com/d/optout].


--
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
[mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com].
To post to this group, send email to legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com].
Visit this group at https://groups.google.com/group/legacy-ornamental-mills 
[https://groups.google.com/group/legacy-ornamental-mills].
For more options, visit https://groups.google.com/d/optout 
[https://groups.google.com/d/optout].

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: Design Kit

[Ray Leaman]

Thanks for your reply Dexter.  So the design kit was for making a "drawing"
on paper of what the stock will look like once cut rather than applying it
to the stock per se.  I assume it was for spindle turning for the most part?

Are the Magnate profiles on the attachment you sent full size or scaled
down?

On Tue, Aug 28, 2018 at 5:35 PM, Dexter Bland  wrote:

>
> Ray,
> A design kit is no longer available from Legacy or anywhere that I am
> aware of. It was a clear set of templates of the router shapes that Magnate
> sells that you could use to draw out the cuts on scaled paper to refine
> your design. You could then use your drawing to lay out your cuts on the
> machine. Attached is a PDF of the router shapes available from Magnate.
> db
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to legacy-ornamental-mills@
> googlegroups.com.
> Visit this group at https://groups.google.com/
> group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: Design Kit

[Dexter Bland]

Ray,
A design kit is no longer available from Legacy or anywhere that I am aware 
of. It was a clear set of templates of the router shapes that Magnate sells 
that you could use to draw out the cuts on scaled paper to refine your 
design. You could then use your drawing to lay out your cuts on the 
machine. Attached is a PDF of the router shapes available from Magnate. 
db

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.


Router Bit Profiles.pdf
Description: Adobe PDF document

Re: Design Kit

[Ray Leaman]

Newbie here.  What's a design kit?  How is it used?  Is it used for all
manual model LOM's? How would somebody get one today?

Thanks

On Tue, Aug 28, 2018 at 2:14 AM, Richard Ellis 
wrote:

> Bill
> *I have taken your advice and decided to keep it.*
> I apologise to all who have sent emails and replied to my post on this site
> At present I am having to answer stupid questions from the purchasers
> solicitor via my solicitor--- an extremely slow   process. I
> will now answer all the emails that I received re: the kit
> Richard
>
> On Saturday, August 25, 2018 at 11:25:17 AM UTC+1, aussiman wrote:
>>
>> Don’t be too quick to get rid of it, magnate ships internationally I can
>> buy a magnate router bit with shipping cheaper than I can buy one here in
>> Australia.
>>
>> I use my design kit all the time when I’m designing a job with a spiral
>> on it
>>
>> I will even buy it from you and I already own one.
>>
>>
>>
>> Bill
>>
>>
>>
>> *From:* legacy-orna...@googlegroups.com [mailto:legacy-ornamental-mill
>> s...@googlegroups.com] *On Behalf Of *Richard Ellis
>> *Sent:* Saturday, 25 August 2018 5:23 PM
>> *To:* Legacy Ornamental Mills
>> *Subject:* Design Kit
>>
>>
>>
>> I have the Legacy Design kit, and have never used it- it came with my
>> Revo Craftsman which is very useful. Great tool.
>>
>> A great pity that the designers at Legacy did not follow it up with
>> larger models on the same principle.
>>
>> Back to the Design Kit , what use is it if I can't buy Magnate Cutters
>> here in the U.K.
>>
>> Does any one want it, here in the U.K. only ? ? ?
>>
>> Richard
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>> To post to this group, send email to legacy-orna...@googlegroups.com.
>> Visit this group at https://groups.google.com/grou
>> p/legacy-ornamental-mills.
>> For more options, visit https://groups.google.com/d/optout.
>>
>>
>>
>>
>> <http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
>>
>> Virus-free. www.avg.com
>> <http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
>>
>>
>>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to legacy-ornamental-mills@
> googlegroups.com.
> Visit this group at https://groups.google.com/
> group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

RE: Design Kit

[Bill Bulkeley]

Wise choice Richard it’s not like you can just go buy another when you miss it 
and wish you hadn’t sold it,.

 I want to even make another with bit shapes that are not on legacy’s one, like 
the combo bits that make up the really large spirals like used on a 6X6 inch 
post with a single start or 12X12inch post with a big 2 start barley or rope. 
and any other bits that aren’t legacy that I use.

 

Bill 

 

 

 

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Richard Ellis
Sent: Tuesday, 28 August 2018 4:14 PM
To: Legacy Ornamental Mills
Subject: Re: Design Kit

 

Bill

I have taken your advice and decided to keep it.

I apologise to all who have sent emails and replied to my post on this site

At present I am having to answer stupid questions from the purchasers solicitor 
via my solicitor--- an extremely slow   process. I will now answer 
all the emails that I received re: the kit

Richard

On Saturday, August 25, 2018 at 11:25:17 AM UTC+1, aussiman wrote:

Don’t be too quick to get rid of it, magnate ships internationally I can buy a 
magnate router bit with shipping cheaper than I can buy one here in Australia.

I use my design kit all the time when I’m designing a job with a spiral on it 

I will even buy it from you and I already own one.

 

Bill

 

From: legacy-orna...@googlegroups.com   
[mailto:legacy-ornamental-mills@googlegroups.com  ] On Behalf Of 
Richard Ellis
Sent: Saturday, 25 August 2018 5:23 PM
To: Legacy Ornamental Mills
Subject: Design Kit

 

I have the Legacy Design kit, and have never used it- it came with my Revo 
Craftsman which is very useful. Great tool.

A great pity that the designers at Legacy did not follow it up with larger 
models on the same principle.

Back to the Design Kit , what use is it if I can't buy Magnate Cutters here in 
the U.K.

Does any one want it, here in the U.K. only ? ? ?

Richard

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com  .
To post to this group, send email to legacy-orna...@googlegroups.com 
 .
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

 


 
<http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
 

Virus-free.  
<http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
 www.avg.com 

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

 


 
<http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
 

Virus-free.  
<http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
 www.avg.com 

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: Design Kit

[Richard Ellis]

Bill
*I have taken your advice and decided to keep it.*
I apologise to all who have sent emails and replied to my post on this site
At present I am having to answer stupid questions from the purchasers 
solicitor via my solicitor--- an extremely slow   process. I 
will now answer all the emails that I received re: the kit
Richard

On Saturday, August 25, 2018 at 11:25:17 AM UTC+1, aussiman wrote:
>
> Don’t be too quick to get rid of it, magnate ships internationally I can 
> buy a magnate router bit with shipping cheaper than I can buy one here in 
> Australia.
>
> I use my design kit all the time when I’m designing a job with a spiral on 
> it 
>
> I will even buy it from you and I already own one.
>
>  
>
> Bill
>
>  
>
> *From:* legacy-orna...@googlegroups.com  [mailto:
> legacy-ornamental-mills@googlegroups.com ] *On Behalf Of 
> *Richard 
> Ellis
> *Sent:* Saturday, 25 August 2018 5:23 PM
> *To:* Legacy Ornamental Mills
> *Subject:* Design Kit
>
>  
>
> I have the Legacy Design kit, and have never used it- it came with my 
> Revo Craftsman which is very useful. Great tool.
>
> A great pity that the designers at Legacy did not follow it up with larger 
> models on the same principle.
>
> Back to the Design Kit , what use is it if I can't buy Magnate Cutters 
> here in the U.K.
>
> Does any one want it, here in the U.K. only ? ? ?
>
> Richard
>
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com 
> .
> To post to this group, send email to legacy-orna...@googlegroups.com 
> .
> Visit this group at 
> https://groups.google.com/group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/d/optout.
>
>  
>
>
> <http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
>
> Virus-free. www.avg.com 
> <http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
>  
>
>  
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: Design Kit

['Bruce Wellard' via Legacy Ornamental Mills]

JimHave checked everything do not see any email can you resend it thanks for 
your replyBruce bruce.well...@yahoo.com   On ‎Sunday‎, ‎August‎ ‎26‎, ‎2018‎ 
‎12‎:‎07‎:‎15‎ ‎PM‎ ‎CDT, Jim AKA Mattox  wrote:  
 
 Check your spam for my email - pictures and asking prices Bruce, haven't heard 
back ?

On Sat, Aug 25, 2018 at 8:32 AM 'Bruce' via Legacy Ornamental Mills 
 wrote:

How much do you want for it and if I pay shipping would you consider shipping 
to the US.Thanks Bruce Wellard.
On Saturday, August 25, 2018 at 2:23:03 AM UTC-5, Richard Ellis wrote:
I have the Legacy Design kit, and have never used it- it came with my Revo 
Craftsman which is very useful. Great tool.A great pity that the designers at 
Legacy did not follow it up with larger models on the same principle.Back to 
the Design Kit , what use is it if I can't buy Magnate Cutters here in the 
U.K.Does any one want it, here in the U.K. only ? ? ?Richard


-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.



-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.
  

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: Design Kit

[Jim AKA Mattox]

Check your spam for my email - pictures and asking prices Bruce, haven't
heard back ?

On Sat, Aug 25, 2018 at 8:32 AM 'Bruce' via Legacy Ornamental Mills <
legacy-ornamental-mills@googlegroups.com> wrote:

> How much do you want for it and if I pay shipping would you consider
> shipping to the US.Thanks Bruce Wellard.
>
> On Saturday, August 25, 2018 at 2:23:03 AM UTC-5, Richard Ellis wrote:
>>
>> I have the Legacy Design kit, and have never used it- it came with my
>> Revo Craftsman which is very useful. Great tool.
>> A great pity that the designers at Legacy did not follow it up with
>> larger models on the same principle.
>> Back to the Design Kit , what use is it if I can't buy Magnate Cutters
>> here in the U.K.
>> Does any one want it, here in the U.K. only ? ? ?
>> Richard
>>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to
> legacy-ornamental-mills@googlegroups.com.
> Visit this group at
> https://groups.google.com/group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: Design Kit

['Bruce' via Legacy Ornamental Mills]

How much do you want for it and if I pay shipping would you consider 
shipping to the US.Thanks Bruce Wellard.

On Saturday, August 25, 2018 at 2:23:03 AM UTC-5, Richard Ellis wrote:
>
> I have the Legacy Design kit, and have never used it- it came with my 
> Revo Craftsman which is very useful. Great tool.
> A great pity that the designers at Legacy did not follow it up with larger 
> models on the same principle.
> Back to the Design Kit , what use is it if I can't buy Magnate Cutters 
> here in the U.K.
> Does any one want it, here in the U.K. only ? ? ?
> Richard
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: Design Kit

[MAX LATHAM]

Walmart even sells the Magnate bits!

and delivery has been free or very inexpensive.

max



From: legacy-ornamental-mills@googlegroups.com 
 on behalf of Bill Bulkeley 

Sent: Saturday, August 25, 2018 5:25 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: Design Kit


Don’t be too quick to get rid of it, magnate ships internationally I can buy a 
magnate router bit with shipping cheaper than I can buy one here in Australia.

I use my design kit all the time when I’m designing a job with a spiral on it

I will even buy it from you and I already own one.



Bill



From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Richard Ellis
Sent: Saturday, 25 August 2018 5:23 PM
To: Legacy Ornamental Mills
Subject: Design Kit



I have the Legacy Design kit, and have never used it- it came with my Revo 
Craftsman which is very useful. Great tool.

A great pity that the designers at Legacy did not follow it up with larger 
models on the same principle.

Back to the Design Kit , what use is it if I can't buy Magnate Cutters here in 
the U.K.

Does any one want it, here in the U.K. only ? ? ?

Richard

--
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to 
legacy-ornamental-mills+unsubscr...@googlegroups.com<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com>.
To post to this group, send email to 
legacy-ornamental-mills@googlegroups.com<mailto:legacy-ornamental-mills@googlegroups.com>.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.



[https://ipmcdn.avast.com/images/icons/icon-envelope-tick-green-avg-v1.png]<http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient>


Virus-free. 
www.avg.com<http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient>




--
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to 
legacy-ornamental-mills+unsubscr...@googlegroups.com<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com>.
To post to this group, send email to 
legacy-ornamental-mills@googlegroups.com<mailto:legacy-ornamental-mills@googlegroups.com>.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

RE: Design Kit

[Bill Bulkeley]

Don’t be too quick to get rid of it, magnate ships internationally I can buy a 
magnate router bit with shipping cheaper than I can buy one here in Australia.

I use my design kit all the time when I’m designing a job with a spiral on it 

I will even buy it from you and I already own one.

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Richard Ellis
Sent: Saturday, 25 August 2018 5:23 PM
To: Legacy Ornamental Mills
Subject: Design Kit

 

I have the Legacy Design kit, and have never used it- it came with my Revo 
Craftsman which is very useful. Great tool.

A great pity that the designers at Legacy did not follow it up with larger 
models on the same principle.

Back to the Design Kit , what use is it if I can't buy Magnate Cutters here in 
the U.K.

Does any one want it, here in the U.K. only ? ? ?

Richard

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

 


 
<http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
 

Virus-free.  
<http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
 www.avg.com 

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Design Kit

[Richard Ellis]

I have the Legacy Design kit, and have never used it- it came with my 
Revo Craftsman which is very useful. Great tool.
A great pity that the designers at Legacy did not follow it up with larger 
models on the same principle.
Back to the Design Kit , what use is it if I can't buy Magnate Cutters here 
in the U.K.
Does any one want it, here in the U.K. only ? ? ?
Richard

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: Designing with Cad vs Design Kit

[Jim Riggen]

Tim,

Thank you very much.

Jim

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: Designing with Cad vs Design Kit

[Tim Krause]

That was only 10 years ago, I'm not done yet :-)  Tracy at Legacy requested 
that any one wanting the router bit profiles in a dxf format will need to get 
them from him.  If I recall correctly his email address is 
tr...@legacywoodworking.com.  If that is not the right address I would call 
him.  The phone is the best way of talking to any one at Legacy.  If all else 
fails, get back in contact with me. 

-Tim


  - Original Message - 
  From: Jim Riggen 
  To: Legacy Ornamental Mills 
  Cc: Legacy-Ornamental-Mills@googlegroups.com 
  Sent: Friday, February 24, 2017 2:30 PM
  Subject: Re: Designing with Cad vs Design Kit


  Tim,


  Did you ever get the profiles separated?  The message thread sorta ends 
abruptly.


  If you got them separated, are you willing to share them?


  Thanks,


  Jim




  On Saturday, June 2, 2007 at 2:02:54 PM UTC-5, Tim wrote:
Hi Jeff,
I'd like to share my files, but I just found out it is going to take an
extra step for me to do this. I turns out all of my profiles are stored in a
single collection. I will need to convert them to dxf files individually now
that I have them stored as symbols. I guessing this is a proprietary format.

I'm thinking about using acad version 14 as a shareable standard. Does that
work for anyone interested?  I can export version 9 - 2006.

-Tim

- Original Message - 
From: "Love to turn in Oregon" <jwi...@comcast.net>
To: "Legacy Ornamental Mills" <legacy-orna...@googlegroups.com>
Sent: Saturday, June 02, 2007 8:09 AM
Subject: Re: Designing with Cad vs Design Kit


>
> Would you mind sharing your designed profiles, and/or the technique
> you use to create your profiles? I would be interested in trying them
> with CAD.
>
> -Jeff
>
> On Jun 2, 8:02 am, "Steve Hunt" <s.hu...@tiscali.co.uk> wrote:
> > Hi..
> >
> > I have the design kit, but do not use it for the same reason as you guys
> > have mentioned, acad is much easier. The other problem I have with both
    > > magnate and the legacy design kit is that nothing is labelled.. On the
> > design kit templates, there are no numbers to tell you which cutter you
are
> > drawing, similarly, magnate do not bother to put the cutter number on
their
> > router bits. Once the cutter is in acad, you can label it with its
number
> > and always keep track of what you are using..
> >
> > If it would be of any use to you, I could scan the design templates
(1:1)
> > and then maybe you could try to incorporate it into cad? Of course, you
will
> > still have to figure out which cutter is which.
> >
> > Steve..
> >
> >   _
> >
> > From: legacy-orna...@googlegroups.com
> > [mailto:Legacy-Ornamental-Mills@googlegroups.com] On Behalf Of Grant
Lasson
> > Sent: 02 June 2007 14:01
> > To: legacy-orna...@googlegroups.com
> > Subject: RE: Designing with Cad vs Design Kit
> >
> > Been there and tried that. They seemed very suspicious about why I would
> > want them. Anyway, they claimed to me that they didn't have them. I said
I
> > was a little surprised because I thought all that cutting and shaping
was
> > done by CNC machines these days. They said that was true but that they
> > didn't make the bits. They outsourced that activity to another company.
> >
> > I'd much prefer to use CAD as my design kit. Much more flexible. Easy to
> > save a dozen different versions, etc. The difficulty, of course, is that
> > there isn't enough information given in the Magnate catalog to replicate
the
> > bit profile. One would either need the Design Kit or the actual bit. So,
> > this idea sits on the shelf with the rest of my good ideas waiting for
> > sufficient time.
> >
    > > Grant
> >
> > From: legacy-orna...@googlegroups.com
> > [mailto:Legacy-Ornamental-Mills@googlegroups.com] On Behalf Of Steve
Hunt
> > Sent: Friday, June 01, 2007 2:32 PM
> > To: legacy-orna...@googlegroups.com
> > Subject: RE: Designing with Cad vs Design Kit
> >
> > Hi Tim.
> >
> > Have you tried emailing magnate? Maybe they already have cad files for
all
> > their cutters?
> >
> > Steve..
> >
> >   _
> >
> > From: legacy-orna...@googlegroups.com
> > [mailto:Legacy-Ornamental-Mills@googlegroups.com] On Behalf Of Tim
Krause
> > Sent: 01 June 2007 22:18
> > To: legac

Re: legacy design kit

[Brandon Khoury]

I'm curious to know if anyone has tried out the sketchup method for designing 
spindles,  so I thought I would post a reply to keep the thread active.

Brandon

-- 
You received this message because you are subscribed to the Google Groups 
Legacy Ornamental Mills group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: legacy design kit

[Brandon Khoury]

Did anyone get a chance to try out this method? I'm curious to hear your 
experience.  Especially, for those who have used the paper design kit, how this 
compares to the pen/paper method. Also,  are there any suggestions/tips to make 
this easier to use? 

I look forward to hearing your thoughts. 
Brandon

-- 
You received this message because you are subscribed to the Google Groups 
Legacy Ornamental Mills group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: legacy design kit

[Stan Shuford]

That's great Brandon. I'm in the process of learnining Sketchup and this
will help. Aspire (my CNC software) has recently announced Sketchup import
for tool path generation. Haven't tried it yet.
Thanks!

Stan Shuford
s...@shuford.com


On Wed, Jul 9, 2014 at 9:52 PM, Brandon Khoury blkhou...@gmail.com wrote:

 Ok, this went quicker than I thought. I got home early tonight  and had
 some time to hash this out. I have attached the Bit Profiles needed, along
 with a few screenshots to help visualize the process.
 First, save the Bit Profiles to a folder that you can easily locate. You
 will need that file location to load them into sketchup. You will also need
 to find and install the Grid plugin. If I recall correctly, it can be found
 in the extension warehouse. I have listed out the process and how they
 correspond to the screenshots.

 1) Set view to Parallel Projection and set the view to Top.
 2) Go to Tools and open Components
 3) Click the menu button on the side of the Components window and click
 Open Collection. (Screenshot 1)
 4) Locate the Bit Profiles to load them.
 5) Go to Tools, and select Grid from the bottom of the list.
 6) Set the scale by typing 1 into the Measurements box at the bottom
 right. Then press enter to set the scale.
 7) Click to set the start point, drag to set the length along the x-axis
 then click again. Then drag up to set the y-axis. (Screenshot 2)
 8) Use the line tool, as normal, to create any flat surfaces.
 9) Drag and drop the desired profile onto the grid. (Screenshot 3)
 10) The side edges of the bits are still in place to help identify
 overlapping, but can be erased if desired to clean up the image.
 (Screenshot 4)

 That's the quick and dirty version. Let me know if you have any other
 questions.
 By the way, I created the profiles by outlining the profiles that were
 distributed by Tracy at Legacy. Hopefully, distributing my sketchup
 versions doesn't create any issue.

 Enjoy!
 Brandon

 --
 You received this message because you are subscribed to the Google Groups
 Legacy Ornamental Mills group.
 To unsubscribe from this group and stop receiving emails from it, send an
 email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
 To post to this group, send email to
 legacy-ornamental-mills@googlegroups.com.
 Visit this group at http://groups.google.com/group/legacy-ornamental-mills
 .
 For more options, visit https://groups.google.com/d/optout.


-- 
You received this message because you are subscribed to the Google Groups 
Legacy Ornamental Mills group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: legacy design kit

[Brandon Khoury]

A quick FYI. You will probably notice that there are some profiles that are 
missing. I am still working on creating them. I haven't had much time to 
dedicate to them lately, but I will upload them when once I get them 
finished.

Brandon

-- 
You received this message because you are subscribed to the Google Groups 
Legacy Ornamental Mills group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: legacy design kit

[stormin...@snet.net]

 Brandon,

I would be interested in how you use sketchup for profiles. 

-- 
You received this message because you are subscribed to the Google Groups 
Legacy Ornamental Mills group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: legacy design kit

[CURTIS GEORGE]

Brandon 
I too would like to see how you do what you do. 
When you have the time. please let us know. 
C.A.G. 

- Original Message -






Brandon, 


I would be interested in how you use sketchup for profiles. 

-- 
You received this message because you are subscribed to the Google Groups 
Legacy Ornamental Mills group. 
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com . 
To post to this group, send email to legacy-ornamental-mills@googlegroups.com . 
Visit this group at http://groups.google.com/group/legacy-ornamental-mills . 
For more options, visit https://groups.google.com/d/optout . 

-- 
You received this message because you are subscribed to the Google Groups 
Legacy Ornamental Mills group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: legacy design kit

[Bill Bulkeley]

if possible could you also do some profiles of the combination bits that 
would be great i have been wanting them for quite some time

Bill


- Original Message - 
From: Brandon Khoury blkhou...@gmail.com

To: legacy-ornamental-mills@googlegroups.com
Sent: Wednesday, July 09, 2014 6:02 AM
Subject: Re: legacy design kit


I have developed a method for designing spindles using sketchup.  Give me 
some time and I'll do a write up and see if I can attach the bit profiles I 
created.  I made them using the profiles from Tracy. There are a couple 
plug-ins needed as well.


Again,  give me some time to get this done.  I am extraordinarily busy at 
work at I'm doing a lot of traveling currently. Hopefully,  I can get his 
done in the next week or so.


Brandon

--
You received this message because you are subscribed to the Google Groups 
Legacy Ornamental Mills group.
To unsubscribe from this group and stop receiving emails from it, send an 
email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to 
legacy-ornamental-mills@googlegroups.com.
Visit this group at 
http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout. 


--
You received this message because you are subscribed to the Google Groups Legacy 
Ornamental Mills group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

RE: legacy design kit

[MAX LATHAM]

Did you ever get a set?max latham

From: bulke...@mmnet.com.au
To: legacy-ornamental-mills@googlegroups.com
Subject: legacy design kit
Date: Mon, 12 May 2014 14:35:53 +1000

Has anybody out there got the sheets with all the router bit shapes and numbers 
of the bits on it that comes with the legacy design kit .my kit I got second 
hand doesn't have this sheet and I would like to get one again Not the plastic 
sheets the paper ones If so could someone scan it and either post it here or 
email it to meI started to design some stair balustrades  and found out I 
didn't have itI have to keep going to the router cupboard to check if I have 
the bits I'm tracing and the number on them it's a pain  Bill













This email is free from viruses and malware 
because avast! Antivirus protection is active.











-- 

You received this message because you are subscribed to the Google Groups 
Legacy Ornamental Mills group.

To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.

To post to this group, send email to legacy-ornamental-mills@googlegroups.com.

Visit this group at http://groups.google.com/group/legacy-ornamental-mills.

For more options, visit https://groups.google.com/d/optout.
  

-- 
You received this message because you are subscribed to the Google Groups 
Legacy Ornamental Mills group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

RE: legacy design kit

[mwfoscue]

Max,No, I have been searching for one for well over a year. Still no luck.Why, do you have one you are no longer using and are willing to part with?Thanks.Mac-Original Message-
From: MAX LATHAM <ma...@hotmail.com>
Sent: Jun 12, 2014 9:56 AM
To: "legacy-ornamental-mills@googlegroups.com" <legacy-ornamental-mills@googlegroups.com>
Subject: RE: legacy design kit




Did you ever get a set?max lathamFrom: bulke...@mmnet.com.auTo: legacy-ornamental-mills@googlegroups.comSubject: legacy design kitDate: Mon, 12 May 2014 14:35:53 +1000Has anybody out there got the sheets with all the router bit shapes and numbers of the bits on it that comes with the legacy design kit .my kit I got second hand doesn’t have this sheet and I would like to get one again Not the plastic sheets the paper ones If so could someone scan it and either post it here or email it to meI started to design some stair balustrades and found out I didn’t have itI have to keep going to the router cupboard to check if I have the bits I’m tracing and the number on them it’s a pain Bill



	
		
			

			
		
		
			
This email is free from viruses and malware because avast! Antivirus protection is active.
			
		
	






-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout. 		 	   		  




-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.




-- 
You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: legacy design kit

[Milt on Gmail]

I just found mine.  Will PDF and post by the weekend. 

Sent from my Iphone 5

 On Jun 12, 2014, at 7:51 AM, mwfos...@earthlink.net wrote:
 
 Max,
 No, I have been searching for one for well over a year.  Still no luck.
 Why, do you have one you are no longer using and are willing to part with?
 Thanks.
 Mac
 -Original Message- 
 From: MAX LATHAM 
 Sent: Jun 12, 2014 9:56 AM 
 To: legacy-ornamental-mills@googlegroups.com 
 Subject: RE: legacy design kit 
 
 Did you ever get a set?
 max latham
 
 
 From: bulke...@mmnet.com.au
 To: legacy-ornamental-mills@googlegroups.com
 Subject: legacy design kit
 Date: Mon, 12 May 2014 14:35:53 +1000
 
 Has anybody out there got the sheets with all the router bit shapes and 
 numbers of the bits on it that comes with the legacy design kit .my kit I got 
 second hand doesn’t have this sheet and I would like to get one again
 Not the plastic sheets the paper ones
 If so could someone scan it and either post it here or email it to me
 I started to design some stair balustrades  and found out I didn’t have it
 I have to keep going to the router cupboard to check if I have the bits I’m 
 tracing and the number on them it’s a pain  
 Bill
 
 
   
 This email is free from viruses and malware because avast! Antivirus 
 protection is active.
 
 
 -- 
 You received this message because you are subscribed to the Google Groups 
 Legacy Ornamental Mills group.
 To unsubscribe from this group and stop receiving emails from it, send an 
 email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
 To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
 Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
 For more options, visit https://groups.google.com/d/optout.
 -- 
 You received this message because you are subscribed to the Google Groups 
 Legacy Ornamental Mills group.
 To unsubscribe from this group and stop receiving emails from it, send an 
 email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
 To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
 Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
 For more options, visit https://groups.google.com/d/optout.
 -- 
 You received this message because you are subscribed to the Google Groups 
 Legacy Ornamental Mills group.
 To unsubscribe from this group and stop receiving emails from it, send an 
 email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
 To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
 Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
 For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups 
Legacy Ornamental Mills group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: legacy design kit

['joe biunno' via Legacy Ornamental Mills]

if anyone is up for a trade of some sort, here is what i have...a pad of 
paper that has a 1 grid pattern laid out on it, with the legacy trademark 
on it...the pad measures 13 x 40 overall...approx. 30 pages...also a pad 
that has a circular graph on it that you would use with your rotary table, 
also with the legacy info on it...this pad is full and about 40 
pages...three thick plastic sheets with template cut outs that i would 
assume would correspond to various router bit profiles...they still have 
the protective plastic on each side of the piece so my guess is that they 
were never used...and all of this is still in the original box as shipped 
by legacy...i'd be interested in trading for some legacy 
items...railing?...let me know...thanks...joe...e-mail   finun...@aol.com

On Thursday, June 12, 2014 3:06:12 PM UTC-4, Milt wrote:

 I just found mine.  Will PDF and post by the weekend. 

 Sent from my Iphone 5

 On Jun 12, 2014, at 7:51 AM, mwfo...@earthlink.net javascript: wrote:

 Max,
 No, I have been searching for one for well over a year.  Still no luck.
 Why, do you have one you are no longer using and are willing to part with?
 Thanks.
 Mac
 --
 --

 -Original Message- 
 From: MAX LATHAM 
 Sent: Jun 12, 2014 9:56 AM 
 To: legacy-orna...@googlegroups.com javascript: 
 Subject: RE: legacy design kit 

 Did you ever get a set?
 max latham


 --
 From: bulk...@mmnet.com.au javascript:
 To: legacy-orna...@googlegroups.com javascript:
 Subject: legacy design kit
 Date: Mon, 12 May 2014 14:35:53 +1000

 Has anybody out there got the sheets with all the router bit shapes and 
 numbers of the bits on it that comes with the legacy design kit .my kit I 
 got second hand doesn’t have this sheet and I would like to get one again 

 Not the plastic sheets the paper ones 

 If so could someone scan it and either post it here or email it to me

 I started to design some stair balustrades  and found out I didn’t have it

 I have to keep going to the router cupboard to check if I have the bits 
 I’m tracing and the number on them it’s a pain  

 Bill


 --
http://www.avast.com/  

 This email is free from viruses and malware because avast! Antivirus 
 http://www.avast.com/ protection is active. 
   

 -- 
 You received this message because you are subscribed to the Google Groups 
 Legacy Ornamental Mills group.
 To unsubscribe from this group and stop receiving emails from it, send an 
 email to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 javascript:.
 To post to this group, send email to legacy-orna...@googlegroups.com 
 javascript:.
 Visit this group at http://groups.google.com/group/legacy-ornamental-mills
 .
 For more options, visit https://groups.google.com/d/optout.
  
 -- 
 You received this message because you are subscribed to the Google Groups 
 Legacy Ornamental Mills group.
 To unsubscribe from this group and stop receiving emails from it, send an 
 email to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 javascript:.
 To post to this group, send email to legacy-orna...@googlegroups.com 
 javascript:.
 Visit this group at http://groups.google.com/group/legacy-ornamental-mills
 .
 For more options, visit https://groups.google.com/d/optout.

  -- 
 You received this message because you are subscribed to the Google Groups 
 Legacy Ornamental Mills group.
 To unsubscribe from this group and stop receiving emails from it, send an 
 email to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 javascript:.
 To post to this group, send email to legacy-orna...@googlegroups.com 
 javascript:.
 Visit this group at http://groups.google.com/group/legacy-ornamental-mills
 .
 For more options, visit https://groups.google.com/d/optout.



-- 
You received this message because you are subscribed to the Google Groups 
Legacy Ornamental Mills group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: legacy design kit

[Bill Bulkeley]

yes i did get the sheets but i didnt get any one to draw up the combination bit 
profiles so i can make templeats for them I dont have a drawing program to do it
perhaps some one on the group that has a drawing program migh post some for me 
one day hint hint hint 
Bill
  - Original Message - 
  From: MAX LATHAM 
  To: legacy-ornamental-mills@googlegroups.com 
  Sent: Thursday, June 12, 2014 11:56 PM
  Subject: RE: legacy design kit


  Did you ever get a set?
  max latham




--
  From: bulke...@mmnet.com.au
  To: legacy-ornamental-mills@googlegroups.com
  Subject: legacy design kit
  Date: Mon, 12 May 2014 14:35:53 +1000


  Has anybody out there got the sheets with all the router bit shapes and 
numbers of the bits on it that comes with the legacy design kit .my kit I got 
second hand doesn't have this sheet and I would like to get one again 

  Not the plastic sheets the paper ones 

  If so could someone scan it and either post it here or email it to me

  I started to design some stair balustrades  and found out I didn't have it

  I have to keep going to the router cupboard to check if I have the bits I'm 
tracing and the number on them it's a pain  

  Bill




--
  This email is free from viruses and malware because avast! Antivirus 
protection is active. 
   


  -- 
  You received this message because you are subscribed to the Google Groups 
Legacy Ornamental Mills group.
  To unsubscribe from this group and stop receiving emails from it, send an 
email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
  To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
  Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
  For more options, visit https://groups.google.com/d/optout.


  -- 
  You received this message because you are subscribed to the Google Groups 
Legacy Ornamental Mills group.
  To unsubscribe from this group and stop receiving emails from it, send an 
email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
  To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
  Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
  For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups 
Legacy Ornamental Mills group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: legacy design kit

[Bill Bulkeley]

I have the profiles if you want to make your own with a scroll saw
Bill
  - Original Message - 
  From: mwfos...@earthlink.net 
  To: legacy-ornamental-mills@googlegroups.com 
  Sent: Friday, June 13, 2014 12:51 AM
  Subject: RE: legacy design kit


  Max,
  No, I have been searching for one for well over a year.  Still no luck.
  Why, do you have one you are no longer using and are willing to part with?
  Thanks.
  Mac

--

--

-Original Message- 
From: MAX LATHAM 
Sent: Jun 12, 2014 9:56 AM 
To: legacy-ornamental-mills@googlegroups.com 
Subject: RE: legacy design kit 


Did you ever get a set?
max latham





From: bulke...@mmnet.com.au
To: legacy-ornamental-mills@googlegroups.com
Subject: legacy design kit
Date: Mon, 12 May 2014 14:35:53 +1000


Has anybody out there got the sheets with all the router bit shapes and 
numbers of the bits on it that comes with the legacy design kit .my kit I got 
second hand doesn’t have this sheet and I would like to get one again 

Not the plastic sheets the paper ones 

If so could someone scan it and either post it here or email it to me

I started to design some stair balustrades  and found out I didn’t have it

I have to keep going to the router cupboard to check if I have the bits I’m 
tracing and the number on them it’s a pain  

Bill





This email is free from viruses and malware because avast! 
Antivirus protection is active. 
 


-- 
You received this message because you are subscribed to the Google Groups 
Legacy Ornamental Mills group.
To unsubscribe from this group and stop receiving emails from it, send an 
email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to 
legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.


-- 
You received this message because you are subscribed to the Google Groups 
Legacy Ornamental Mills group.
To unsubscribe from this group and stop receiving emails from it, send an 
email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to 
legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.


  -- 
  You received this message because you are subscribed to the Google Groups 
Legacy Ornamental Mills group.
  To unsubscribe from this group and stop receiving emails from it, send an 
email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
  To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
  Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
  For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups 
Legacy Ornamental Mills group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: legacy design kit

[mwfoscue]

Tim,No file included or attached - please re-send. Thanks.Mac===-Original Message-
From: "regal...@juno.com" <regal...@juno.com>
Sent: May 16, 2014 10:42 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: legacy design kit

A long time ago I made this file that covers what is in the design kit.  It is for the groups benefit.  I'd assume not what Bill is looking for but interesting. -Tim  - Original Message -   From: mwfos...@earthlink.net   To: legacy-ornamental-mills@googlegroups.com   Sent: Monday, May 12, 2014 1:34 PM  Subject: Re: legacy design kitMike,Yes, I am interested in getting a set of the Magnate Legacy Ornamental Mill router bit templates.I'm not in a hurry - so give The Group a  bit of time to reply back to you on this.  I assume you have a set of the "Originals"?  I have a couple sheets of the rectangular grid - unfortunately, none of the round sheets.  I was thinking I could probably take one of my sheets to a "printing shop" and have then produce a couple "tablets" of the graph paper. (Or better yet a Community College where they teach printing - could be a "project" for a student.  That way it would cost less.)Do you have an Epilogue laser cutter?  Thanks for the offer.Mac--Original Message- From: mike Sent: May 12, 2014 3:01 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: legacy design kit I attached the router bit profile dxf file, I can make the templates out of 1/8in plexiglass if anybody is interested let me know.On Sunday, May 11, 2014 11:35:53 PM UTC-5, aussiman wrote: Has anybody out there got the sheets with all the router bit shapes and      numbers of the bits on it that comes with the legacy design kit .my kit I  got second hand doesn’t have this sheet and I would like to get one again  Not the plastic sheets the paper ones  If so could someone scan it and either post it here or email it to me I started to design some stair balustrades and found out I didn’t have it I have to keep going to the router cupboard to check if I have the bits  I’m tracing and the number on them it’s a pain  Bill



-- 
You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: legacy design kit

[regal...@juno.com]

A long time ago I made this file that covers what is in the design kit.  It is 
for the groups benefit.  I'd assume not what Bill is looking for but 
interesting. 

-Tim

  - Original Message - 
  From: mwfos...@earthlink.net 
  To: legacy-ornamental-mills@googlegroups.com 
  Sent: Monday, May 12, 2014 1:34 PM
  Subject: Re: legacy design kit


Mike,
Yes, I am interested in getting a set of the Magnate Legacy Ornamental Mill 
router bit templates.
I'm not in a hurry - so give The Group a  bit of time to reply back to you 
on this.  I assume you have a set of the Originals?  I have a couple sheets 
of the rectangular grid - unfortunately, none of the round sheets.  I was 
thinking I could probably take one of my sheets to a printing shop and have 
then produce a couple tablets of the graph paper. (Or better yet a Community 
College where they teach printing - could be a project for a student.  That 
way it would cost less.)
Do you have an Epilogue laser cutter?  
Thanks for the offer.
Mac

-
-Original Message- 
From: mike 
Sent: May 12, 2014 3:01 PM 
To: legacy-ornamental-mills@googlegroups.com 
Subject: Re: legacy design kit 

I attached the router bit profile dxf file, I can make the templates out of 
1/8in plexiglass if anybody is interested let me know.

On Sunday, May 11, 2014 11:35:53 PM UTC-5, aussiman wrote:

 Has anybody out there got the sheets with all the router bit shapes and 
 numbers of the bits on it that comes with the legacy design kit .my kit I 
 got second hand doesn’t have this sheet and I would like to get one again 

 Not the plastic sheets the paper ones 

 If so could someone scan it and either post it here or email it to me

 I started to design some stair balustrades and found out I didn’t have it

 I have to keep going to the router cupboard to check if I have the bits 
 I’m tracing and the number on them it’s a pain 

 Bill


  -- 
  You received this message because you are subscribed to the Google Groups 
Legacy Ornamental Mills group.
  To unsubscribe from this group and stop receiving emails from it, send an 
email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
  To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
  Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
  For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups 
Legacy Ornamental Mills group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

legacy design kit

[Bill Bulkeley]

Has anybody out there got the sheets with all the router bit shapes and
numbers of the bits on it that comes with the legacy design kit .my kit I
got second hand doesn't have this sheet and I would like to get one again 

Not the plastic sheets the paper ones 

If so could someone scan it and either post it here or email it to me

I started to design some stair balustrades  and found out I didn't have it

I have to keep going to the router cupboard to check if I have the bits I'm
tracing and the number on them it's a pain  

Bill



---
This email is free from viruses and malware because avast! Antivirus protection 
is active.
http://www.avast.com

-- 
You received this message because you are subscribed to the Google Groups 
Legacy Ornamental Mills group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: legacy design kit

[mwfoscue]

Bill,Glad you brought up the subject of the Legacy Design Kit. I'd love to get my hands on one. If that is not possible, perhaps someone in The Group has the ability (or knows someone who does) to reproduce the Lexan/plastic (?) bit templates like what came in the no-longer-produced kit. If we have enough Group Members interested is getting the plastic templates - their production may be economically feasible.I do know that you used to be able to get the CAD shapes/sizes from Legacy (and perhaps Tim?). Perhaps you can then print them out to do what you are wanting to do.You bring up a "beef" I have with the Magnate router bits: On the few Magnate router bits I have, the plastic container/box they came in has a label with most of the bit's info on it. HOWEVER! - the router bits only have "Magnate" etched on the shank - NO bit model number! I HATE that! Why don't they etch the bit's stock/model number on the shank?A related "beef": Magnate has changed the Model numbers of a number of their bits. I don't know why - nor have I seen a cross-reference table, where you can look up a bit you have and the table tells you its "equivalent" bit: "old to new" or new to old". Does anyone have such a cross-reference table/list they can scan and post here?Can anyone explain why Magnate changed their model numbers? All info anyone can share with The Group regarding Magnate's Legacy Ornamental Mill bits will be greatly appreciated.Thanks.Mac---Original Message-
From: Bill Bulkeley <bulke...@mmnet.com.au>
Sent: May 12, 2014 12:35 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: legacy design kit

Has anybody out there got the sheets with all the router bit shapes andnumbers of the bits on it that comes with the legacy design kit .my kit Igot second hand doesn't have this sheet and I would like to get one again Not the plastic sheets the paper ones If so could someone scan it and either post it here or email it to meI started to design some stair balustrades  and found out I didn't have itI have to keep going to the router cupboard to check if I have the bits I'mtracing and the number on them it's a pain  Bill



-- 
You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

What's Wrong Here? Design Kit Sells for $125 , Mills for less than $1000

[Begat]

Hello All, 

A design kit from Legacy recently sold for $125.  Loaded mills are going 
for only $800 to $1200.  

http://www.ebay.com/itm/Legacy-Ornamental-Mill-Design-Kit-/181264037101?ViewItem=ssPageName=ADME%3AB%3ASS%3AUS%3A3160item=181264037101nma=truesi=ODacsOZR79Xmlqrx94nzS8N8rac%253Dorig_cvip=truert=nc_trksid=p2047675.l2557

I guess people with mills want accessories, but people without mills have 
to be lured with a great deal.

Begat


-- 
You received this message because you are subscribed to the Google Groups 
Legacy Ornamental Mills group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/groups/opt_out.

RE: What's Wrong Here? Design Kit Sells for $125 , Mills for less than $1000

[Bill Bulkeley]

I missed that one how much did they cost when they were available?

I wonder if it was any one here who bought it.

I always hoped they would have made a template in the the design kit for the
large combination bits

But they never did

Bill

 

From: legacy-ornamental-mills@googlegroups.com
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Begat
Sent: Monday, 18 November 2013 10:36 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: What's Wrong Here? Design Kit Sells for $125 , Mills for less than
$1000

 

Hello All, 

A design kit from Legacy recently sold for $125.  Loaded mills are going for
only $800 to $1200.  

http://www.ebay.com/itm/Legacy-Ornamental-Mill-Design-Kit-/181264037101?View
Item=
http://www.ebay.com/itm/Legacy-Ornamental-Mill-Design-Kit-/181264037101?Vie
wItem=ssPageName=ADME%3AB%3ASS%3AUS%3A3160item=181264037101nma=truesi=OD
acsOZR79Xmlqrx94nzS8N8rac%253Dorig_cvip=truert=nc_trksid=p2047675.l2557
ssPageName=ADME%3AB%3ASS%3AUS%3A3160item=181264037101nma=truesi=ODacsOZR
79Xmlqrx94nzS8N8rac%253Dorig_cvip=truert=nc_trksid=p2047675.l2557

I guess people with mills want accessories, but people without mills have to
be lured with a great deal.

Begat



-- 
You received this message because you are subscribed to the Google Groups
Legacy Ornamental Mills group.
To unsubscribe from this group and stop receiving emails from it, send an
email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to
legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/groups/opt_out.



No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4158 / Virus Database: 3629/6834 - Release Date: 11/13/13

-- 
You received this message because you are subscribed to the Google Groups 
Legacy Ornamental Mills group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/groups/opt_out.

What's Wrong Here? Design Kit Sells for $125 , Mills for less than $1000

[Michael Kratky]

With that in mind I've been looking unsuccessfully for some time now for a
deal on Magnate router bits to finally get my 1200 into production. 

 

Mike Kratky

 

 

 

 

 

From: legacy-ornamental-mills@googlegroups.com
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Begat
Sent: Monday, November 18, 2013 6:36 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: What's Wrong Here? Design Kit Sells for $125 , Mills for less than
$1000

 

Hello All, 

A design kit from Legacy recently sold for $125.  Loaded mills are going for
only $800 to $1200.  

http://www.ebay.com/itm/Legacy-Ornamental-Mill-Design-Kit-/181264037101?View
Item=
http://www.ebay.com/itm/Legacy-Ornamental-Mill-Design-Kit-/181264037101?Vie
wItem=ssPageName=ADME%3AB%3ASS%3AUS%3A3160item=181264037101nma=truesi=OD
acsOZR79Xmlqrx94nzS8N8rac%253Dorig_cvip=truert=nc_trksid=p2047675.l2557
ssPageName=ADME%3AB%3ASS%3AUS%3A3160item=181264037101nma=truesi=ODacsOZR
79Xmlqrx94nzS8N8rac%253Dorig_cvip=truert=nc_trksid=p2047675.l2557

I guess people with mills want accessories, but people without mills have to
be lured with a great deal.

Begat



-- 
You received this message because you are subscribed to the Google Groups
Legacy Ornamental Mills group.
To unsubscribe from this group and stop receiving emails from it, send an
email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to
legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/groups/opt_out.

-- 
You received this message because you are subscribed to the Google Groups 
Legacy Ornamental Mills group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at http://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/groups/opt_out.

Re[2]: design kit

[arge]

Hi Bill.
My mill is 900.
I purchased Design Kit from Legacy by $109
I`l give it for you by S100.
Shipping cost is $30-40. ( I don`t know exact weight) 
Shipping time is 2-4 weeks.

Arkady.

P.S.
I can`t post to group. I don`t know why. Maybe because my poor English I don`t understand all posting rules. Can you help me?





--