subject:"RE\: New live center for my 200"

Re: New live center for my 200

2023-06-26 Thread Tim Ziegler

Great stuff Curt, was good you posted a pic of your pedal lathe too. Many
may have not seen that
great innovation. bone turning was great too. Yeah a real bummer on the
power going out , but at least you got
a good pic of you and your dog.
Keep smiling my Friend.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Mon, Jun 26, 2023 at 8:16 PM 'Curt George' via Legacy Ornamental Mills <
legacy-ornamental-mills@googlegroups.com> wrote:

> Hello and good evening everyone.
>
> Sunday's and Mondays are my weekends.  But sadly, We had a storm Saturday
> evening, which caused a power outage for me, The power was restored appx.
> 6pm today.  3 hours in the shop form me over a weekend is NOT normal, And I
> was having withdrawal systems. (Yes people my Feet hurt!  You see with out
> electricity the only way for me to spend my time at home is to walk our
> dog. We walked 10 miles today and even more yesterday.) ;-)
>
> OK (sorry guys, I don't mean to cry over spilled milk, so to speak... This
> weekend was Horrible! )  ;-p
>
> Today's shop time was meant to turn some bone blanks that I got ready for
> turning last weekend.
>
> I did one turning, which turned out pretty good, but after switching form
> machines I noticed that the dead center on my 200 was wearing badly.
> (Note: the 200 was meant to by turned by hand, the motor I use , is way
> more rotations then the dead center was meant to handle.)
> I found an old live center that I used on my pedal lathe, (see Bill web
> site. https://www.youtube.com/watch?v=gpAz-xgLynU )
> The live center has a 1/2-24 thread that holds it onto the MT-1 shaft.
> knowing this I removed it form its shaft and used a fine thread bolt to
> mount it onto my 200.  It was a simple matter of drilling out the 3/8" hole
> that the old dead center used for its mountings and making it 1/2" then
> screwing the bolt onto and in the live center.
> Over all this weekend was not a total lost cause.
> A new toy and bonding time with our puppy. ;-)
>
> Have a good night everyone.
> talk to you all more latter.
>
> C.A.G.
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/579673123.3026508.1687828572139%40mail.yahoo.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHJ5SLRNgqEVtR%2BChCJQq14hNYVezGeT%3DYOzSus0%2BEjsg%40mail.gmail.com.

Re: New live center for my 200

2023-06-26 Thread 'Curt George' via Legacy Ornamental Mills

Thank you Tim.
I hope you have a good night as well.
C.A.G.
On Monday, June 26, 2023 at 10:58:02 PM EDT, Tim Ziegler
wrote:

Great stuff Curt, was good you posted a pic of your pedal lathe too. Many may
have not seen that great innovation. bone turning was great too. Yeah a real
bummer on the power going out , but at least you got a good pic of you and your
dog. Keep smiling my Friend.
Kind Regards,
Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330
320-294-5798 shop320-630-2243 cell

On Mon, Jun 26, 2023 at 8:16 PM 'Curt George' via Legacy Ornamental Mills
wrote:

Hello and good evening everyone.
Sunday's and Mondays are my weekends. But sadly, We had a storm Saturday
evening, which caused a power outage for me, The power was restored appx. 6pm
today. 3 hours in the shop form me over a weekend is NOT normal, And I was
having withdrawal systems. (Yes people my Feet hurt! You see with out
electricity the only way for me to spend my time at home is to walk our dog. We
walked 10 miles today and even more yesterday.) ;-)
OK (sorry guys, I don't mean to cry over spilled milk, so to speak... This
weekend was Horrible! ) ;-p
Today's shop time was meant to turn some bone blanks that I got ready for
turning last weekend.
I did one turning, which turned out pretty good, but after switching form
machines I noticed that the dead center on my 200 was wearing badly.(Note: the
200 was meant to by turned by hand, the motor I use , is way more rotations
then the dead center was meant to handle.) I found an old live center that I
used on my pedal lathe, (see Bill web site.
https://www.youtube.com/watch?v=gpAz-xgLynU )The live center has a 1/2-24
thread that holds it onto the MT-1 shaft. knowing this I removed it form its
shaft and used a fine thread bolt to mount it onto my 200. It was a simple
matter of drilling out the 3/8" hole that the old dead center used for its
mountings and making it 1/2" then screwing the bolt onto and in the live
center.Over all this weekend was not a total lost cause. A new toy and bonding
time with our puppy. ;-)
Have a good night everyone.talk to you all more latter.
C.A.G.

--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/579673123.3026508.1687828572139%40mail.yahoo.com.

Re: New live center for my 200

2023-06-26 Thread Tim Ziegler

Thank you Curt, about time to hit the hay here.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Mon, Jun 26, 2023 at 10:09 PM 'Curt George' via Legacy Ornamental Mills <
legacy-ornamental-mills@googlegroups.com> wrote:

> Thank you Tim.
>
> I hope you have a good night as well.
>
> C.A.G.
>
> On Monday, June 26, 2023 at 10:58:02 PM EDT, Tim Ziegler <
> timjzieg...@gmail.com> wrote:
>
>
> Great stuff Curt, was good you posted a pic of your pedal lathe too. Many
> may have not seen that
> great innovation. bone turning was great too. Yeah a real bummer on the
> power going out , but at least you got
> a good pic of you and your dog.
> Keep smiling my Friend.
>
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> Foreston MN 56330
>
> 320-294-5798 shop
> 320-630-2243 cell
>
>
> On Mon, Jun 26, 2023 at 8:16 PM 'Curt George' via Legacy Ornamental Mills <
> legacy-ornamental-mills@googlegroups.com> wrote:
>
> Hello and good evening everyone.
>
> Sunday's and Mondays are my weekends.  But sadly, We had a storm Saturday
> evening, which caused a power outage for me, The power was restored appx.
> 6pm today.  3 hours in the shop form me over a weekend is NOT normal, And I
> was having withdrawal systems. (Yes people my Feet hurt!  You see with out
> electricity the only way for me to spend my time at home is to walk our
> dog. We walked 10 miles today and even more yesterday.) ;-)
>
> OK (sorry guys, I don't mean to cry over spilled milk, so to speak... This
> weekend was Horrible! )  ;-p
>
> Today's shop time was meant to turn some bone blanks that I got ready for
> turning last weekend.
>
> I did one turning, which turned out pretty good, but after switching form
> machines I noticed that the dead center on my 200 was wearing badly.
> (Note: the 200 was meant to by turned by hand, the motor I use , is way
> more rotations then the dead center was meant to handle.)
> I found an old live center that I used on my pedal lathe, (see Bill web
> site. https://www.youtube.com/watch?v=gpAz-xgLynU )
> The live center has a 1/2-24 thread that holds it onto the MT-1 shaft.
> knowing this I removed it form its shaft and used a fine thread bolt to
> mount it onto my 200.  It was a simple matter of drilling out the 3/8" hole
> that the old dead center used for its mountings and making it 1/2" then
> screwing the bolt onto and in the live center.
> Over all this weekend was not a total lost cause.
> A new toy and bonding time with our puppy. ;-)
>
> Have a good night everyone.
> talk to you all more latter.
>
> C.A.G.
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/579673123.3026508.1687828572139%40mail.yahoo.com
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHJ5SLRNgqEVtR%2BChCJQq14hNYVezGeT%3DYOzSus0%2BEjsg%40mail.gmail.com
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/537993551.3115886.1687835365699%40mail.yahoo.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLGDJJxSLPG3BHJ97vGtbSXNJ0dVAjKhO1iMgwSkDYWgiA%40mail.gmail.com.

RE: New live center for my 200

2023-06-26 Thread bulkeley

You need a gas generator curt like I have power outages I just start it up and 
keep on going

 

Bill

 

From: 'Curt George' via Legacy Ornamental Mills 
 
Sent: Tuesday, June 27, 2023 11:16 AM
To: Legacy ornamental mills 
Subject: New live center for my 200

 

Hello and good evening everyone.

 

Sunday's and Mondays are my weekends.  But sadly, We had a storm Saturday 
evening, which caused a power outage for me, The power was restored appx. 6pm 
today.  3 hours in the shop form me over a weekend is NOT normal, And I was 
having withdrawal systems. (Yes people my Feet hurt!  You see with out 
electricity the only way for me to spend my time at home is to walk our dog. We 
walked 10 miles today and even more yesterday.) ;-)

 

OK (sorry guys, I don't mean to cry over spilled milk, so to speak... This 
weekend was Horrible! )  ;-p

 

Today's shop time was meant to turn some bone blanks that I got ready for 
turning last weekend. 

 

I did one turning, which turned out pretty good, but after switching form 
machines I noticed that the dead center on my 200 was wearing badly.

(Note: the 200 was meant to by turned by hand, the motor I use , is way more 
rotations then the dead center was meant to handle.)   

I found an old live center that I used on my pedal lathe, (see Bill web site. 
https://www.youtube.com/watch?v=gpAz-xgLynU )

The live center has a 1/2-24 thread that holds it onto the MT-1 shaft. knowing 
this I removed it form its shaft and used a fine thread bolt to mount it onto 
my 200.  It was a simple matter of drilling out the 3/8" hole that the old dead 
center used for its mountings and making it 1/2" then screwing the bolt onto 
and in the live center.

Over all this weekend was not a total lost cause. 

A new toy and bonding time with our puppy. ;-)

 

Have a good night everyone.

talk to you all more latter.

 

C.A.G.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/579673123.3026508.1687828572139%40mail.yahoo.com
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000c01d9a8ae%24ca614b10%245f23e130%24%40mmnet.com.au.

Re: New live center for my 200

2023-06-26 Thread 'Curt George' via Legacy Ornamental Mills

 Thanks Bill. I own one (Mine is propane powered/not gasoline), but its in 
parts at this time. I had an oil leak and took it apart to repair the leak, 
Sadly, it looks like I had bad timing. ;-p
Have a good night.
C.A.G.
On Tuesday, June 27, 2023 at 12:21:18 AM EDT,  
wrote:  
 
 
You need a gas generator curt like I have power outages I just start it up and 
keep on going

  

Bill

  

From: 'Curt George' via Legacy Ornamental Mills 
 
Sent: Tuesday, June 27, 2023 11:16 AM
To: Legacy ornamental mills 
Subject: New live center for my 200

  

Hello and good evening everyone.

  

Sunday's and Mondays are my weekends.  But sadly, We had a storm Saturday 
evening, which caused a power outage for me, The power was restored appx. 6pm 
today.  3 hours in the shop form me over a weekend is NOT normal, And I was 
having withdrawal systems. (Yes people my Feet hurt!  You see with out 
electricity the only way for me to spend my time at home is to walk our dog. We 
walked 10 miles today and even more yesterday.) ;-)

  

OK (sorry guys, I don't mean to cry over spilled milk, so to speak... This 
weekend was Horrible! )  ;-p

  

Today's shop time was meant to turn some bone blanks that I got ready for 
turning last weekend. 

  

I did one turning, which turned out pretty good, but after switching form 
machines I noticed that the dead center on my 200 was wearing badly.

(Note: the 200 was meant to by turned by hand, the motor I use , is way more 
rotations then the dead center was meant to handle.)   

I found an old live center that I used on my pedal lathe, (see Bill web site. 
https://www.youtube.com/watch?v=gpAz-xgLynU )

The live center has a 1/2-24 thread that holds it onto the MT-1 shaft. knowing 
this I removed it form its shaft and used a fine thread bolt to mount it onto 
my 200.  It was a simple matter of drilling out the 3/8" hole that the old dead 
center used for its mountings and making it 1/2" then screwing the bolt onto 
and in the live center.

Over all this weekend was not a total lost cause. 

A new toy and bonding time with our puppy. ;-)

  

Have a good night everyone.

talk to you all more latter.

  

C.A.G.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/579673123.3026508.1687828572139%40mail.yahoo.com.


-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000c01d9a8ae%24ca614b10%245f23e130%24%40mmnet.com.au.
  

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/80131890.3056120.1687840159496%40mail.yahoo.com.

RE: New live center for my 200

2023-06-26 Thread M.W.Foscue

Bill,

What juice (mains?) do you run in your house/shop?
Do you have 110 and 220; or only 220 like in Europe? 
Many "home shops" in America add 220v AC/60 cycles if they didn't already have 
it before outfitting their shop.
What cycle do you have - 50?  Or 60 - like here in America?

Thanks.
Mac
-Original Message-
From: 
Sent: Jun 27, 2023 12:21 AM
To: 
Subject: RE: New live center for my 200

You need a gas generator curt like I have power outages I just start it up and 
keep on going
 
Bill
 From: 'Curt George' via Legacy Ornamental Mills 
 
Sent: Tuesday, June 27, 2023 11:16 AM
To: Legacy ornamental mills 
Subject: New live center for my 200

Hello and good evening everyone.

 

Sunday's and Mondays are my weekends.  But sadly, We had a storm Saturday 
evening, which caused a power outage for me, The power was restored appx. 6pm 
today.  3 hours in the shop form me over a weekend is NOT normal, And I was 
having withdrawal systems. (Yes people my Feet hurt!  You see with out 
electricity the only way for me to spend my time at home is to walk our dog. We 
walked 10 miles today and even more yesterday.) ;-)

 

OK (sorry guys, I don't mean to cry over spilled milk, so to speak... This 
weekend was Horrible! )  ;-p

 

Today's shop time was meant to turn some bone blanks that I got ready for 
turning last weekend. 

 

I did one turning, which turned out pretty good, but after switching form 
machines I noticed that the dead center on my 200 was wearing badly.

(Note: the 200 was meant to by turned by hand, the motor I use , is way more 
rotations then the dead center was meant to handle.)   

I found an old live center that I used on my pedal lathe, (see Bill web site. 
https://www.youtube.com/watch?v=gpAz-xgLynU )

The live center has a 1/2-24 thread that holds it onto the MT-1 shaft. knowing 
this I removed it form its shaft and used a fine thread bolt to mount it onto 
my 200.  It was a simple matter of drilling out the 3/8" hole that the old dead 
center used for its mountings and making it 1/2" then screwing the bolt onto 
and in the live center.

Over all this weekend was not a total lost cause. 

A new toy and bonding time with our puppy. ;-)

 

Have a good night everyone.

talk to you all more latter.

 

C.A.G.




-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1059378b-ed45-f0b4-47a2-4274a02414a7%40earthlink.net.

RE: New live center for my 200

2023-06-26 Thread bulkeley

Yea talk about bad timing

 

Bill

 

From: 'Curt George' via Legacy Ornamental Mills 
 
Sent: Tuesday, June 27, 2023 2:29 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: New live center for my 200

 

Thanks Bill. 

I own one (Mine is propane powered/not gasoline), but its in parts at this 
time. I had an oil leak and took it apart to repair the leak, Sadly, it looks 
like I had bad timing. ;-p

 

Have a good night.

 

C.A.G.

 

On Tuesday, June 27, 2023 at 12:21:18 AM EDT, mailto:bulke...@mmnet.com.au> > wrote: 

 

 

You need a gas generator curt like I have power outages I just start it up and 
keep on going

 

Bill

 

From: 'Curt George' via Legacy Ornamental Mills 
mailto:legacy-ornamental-mills@googlegroups.com> > 
Sent: Tuesday, June 27, 2023 11:16 AM
To: Legacy ornamental mills mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: New live center for my 200

 

Hello and good evening everyone.

 

Sunday's and Mondays are my weekends.  But sadly, We had a storm Saturday 
evening, which caused a power outage for me, The power was restored appx. 6pm 
today.  3 hours in the shop form me over a weekend is NOT normal, And I was 
having withdrawal systems. (Yes people my Feet hurt!  You see with out 
electricity the only way for me to spend my time at home is to walk our dog. We 
walked 10 miles today and even more yesterday.) ;-)

 

OK (sorry guys, I don't mean to cry over spilled milk, so to speak... This 
weekend was Horrible! )  ;-p

 

Today's shop time was meant to turn some bone blanks that I got ready for 
turning last weekend. 

 

I did one turning, which turned out pretty good, but after switching form 
machines I noticed that the dead center on my 200 was wearing badly.

(Note: the 200 was meant to by turned by hand, the motor I use , is way more 
rotations then the dead center was meant to handle.)   

I found an old live center that I used on my pedal lathe, (see Bill web site. 
https://www.youtube.com/watch?v=gpAz-xgLynU )

The live center has a 1/2-24 thread that holds it onto the MT-1 shaft. knowing 
this I removed it form its shaft and used a fine thread bolt to mount it onto 
my 200.  It was a simple matter of drilling out the 3/8" hole that the old dead 
center used for its mountings and making it 1/2" then screwing the bolt onto 
and in the live center.

Over all this weekend was not a total lost cause. 

A new toy and bonding time with our puppy. ;-)

 

Have a good night everyone.

talk to you all more latter.

 

C.A.G.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/579673123.3026508.1687828572139%40mail.yahoo.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/579673123.3026508.1687828572139%40mail.yahoo.com?utm_medium=email&utm_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000c01d9a8ae%24ca614b10%245f23e130%24%40mmnet.com.au
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/000c01d9a8ae%24ca614b10%245f23e130%24%40mmnet.com.au?utm_medium=email&utm_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/80131890.3056120.1687840159496%40mail.yahoo.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/80131890.3056120.1687840159496%40mail.yahoo.com?utm_medium=email&utm_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000b01d9a8b7%244ffe7ce0%24effb76a0%24%40mmnet.com.au.

RE: New live center for my 200

2023-06-26 Thread bulkeley

We use 240volt 50 cycles but we call cycles Hertz 

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of M.W.Foscue
Sent: Tuesday, June 27, 2023 2:41 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: New live center for my 200

 

Bill,

 

What juice (mains?) do you run in your house/shop?

Do you have 110 and 220; or only 220 like in Europe? 

Many "home shops" in America add 220v AC/60 cycles if they didn't already have 
it before outfitting their shop.

What cycle do you have - 50?  Or 60 - like here in America?

 

Thanks.

Mac

  _  

  _  

-Original Message-
From: mailto:legacy-ornamental-mills@googlegroups.com> >
Sent: Jun 27, 2023 12:21 AM
To: mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: RE: New live center for my 200

 

You need a gas generator curt like I have power outages I just start it up and 
keep on going

 

Bill

  _  

  _  

 From: 'Curt George' via Legacy Ornamental Mills 
mailto:legacy-ornamental-mills@googlegroups.com> > 
Sent: Tuesday, June 27, 2023 11:16 AM
To: Legacy ornamental mills mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: New live center for my 200

 

Hello and good evening everyone.

 

Sunday's and Mondays are my weekends.  But sadly, We had a storm Saturday 
evening, which caused a power outage for me, The power was restored appx. 6pm 
today.  3 hours in the shop form me over a weekend is NOT normal, And I was 
having withdrawal systems. (Yes people my Feet hurt!  You see with out 
electricity the only way for me to spend my time at home is to walk our dog. We 
walked 10 miles today and even more yesterday.) ;-)

 

OK (sorry guys, I don't mean to cry over spilled milk, so to speak... This 
weekend was Horrible! )  ;-p

 

Today's shop time was meant to turn some bone blanks that I got ready for 
turning last weekend. 

 

I did one turning, which turned out pretty good, but after switching form 
machines I noticed that the dead center on my 200 was wearing badly.

(Note: the 200 was meant to by turned by hand, the motor I use , is way more 
rotations then the dead center was meant to handle.)   

I found an old live center that I used on my pedal lathe, (see Bill web site. 
https://www.youtube.com/watch?v=gpAz-xgLynU )

The live center has a 1/2-24 thread that holds it onto the MT-1 shaft. knowing 
this I removed it form its shaft and used a fine thread bolt to mount it onto 
my 200.  It was a simple matter of drilling out the 3/8" hole that the old dead 
center used for its mountings and making it 1/2" then screwing the bolt onto 
and in the live center.

Over all this weekend was not a total lost cause. 

A new toy and bonding time with our puppy. ;-)

 

Have a good night everyone.

talk to you all more latter.

 

C.A.G.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1059378b-ed45-f0b4-47a2-4274a02414a7%40earthlink.net
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/1059378b-ed45-f0b4-47a2-4274a02414a7%40earthlink.net?utm_medium=email&utm_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/001201d9a8b9%241f6e9fe0%245e4bdfa0%24%40mmnet.com.au.

RE: New live center for my 200

2023-06-26 Thread M.W.Foscue

Bill,

We mostly use "cycles" - but on rare occasion, you will see Hz.  On electric 
appliances, motors, etc. you will see one or the other.

As for voltage, I see our lower voltage mentioned as any of these: 110, 115, or 
120.
And I see our higher household voltage usually mentioned as either 220 or 240. 
(Never seen mention of 230v)

When I was growing up (very younger years) in the Panama Canal Zone - I 
remember we had 25 cycle electricity.  Not sure if it was 110v or something 
else.  Then one day they had a truck come thru the neighborhood - and families 
could swap out their "cycles sensitive" devices - like clocks - for new ones 
that ran on 60 cycles.  Strange, huh?

Mac
  -Original Message-
From: 
Sent: Jun 27, 2023 1:35 AM
To: 
Subject: RE: New live center for my 200

We use 240volt 50 cycles but we call cycles Hertz 
 
Bill
 
From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of M.W.Foscue
Sent: Tuesday, June 27, 2023 2:41 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: New live center for my 200


Bill,
 
What juice (mains?) do you run in your house/shop?
Do you have 110 and 220; or only 220 like in Europe? 
Many "home shops" in America add 220v AC/60 cycles if they didn't already have 
it before outfitting their shop.
What cycle do you have - 50?  Or 60 - like here in America?
 
Thanks.
Mac



-Original Message-
From: mailto:legacy-ornamental-mills@googlegroups.com)>
Sent: Jun 27, 2023 12:21 AM
To: mailto:legacy-ornamental-mills@googlegroups.com)>
Subject: RE: New live center for my 200

You need a gas generator curt like I have power outages I just start it up and 
keep on going
 
Bill


 From: 'Curt George' via Legacy Ornamental Mills 
mailto:legacy-ornamental-mills@googlegroups.com)> 
Sent: Tuesday, June 27, 2023 11:16 AM
To: Legacy ornamental mills mailto:legacy-ornamental-mills@googlegroups.com)>
Subject: New live center for my 200

Hello and good evening everyone.

 

Sunday's and Mondays are my weekends.  But sadly, We had a storm Saturday 
evening, which caused a power outage for me, The power was restored appx. 6pm 
today.  3 hours in the shop form me over a weekend is NOT normal, And I was 
having withdrawal systems. (Yes people my Feet hurt!  You see with out 
electricity the only way for me to spend my time at home is to walk our dog. We 
walked 10 miles today and even more yesterday.) ;-)

 

OK (sorry guys, I don't mean to cry over spilled milk, so to speak... This 
weekend was Horrible! )  ;-p

 

Today's shop time was meant to turn some bone blanks that I got ready for 
turning last weekend. 

 

I did one turning, which turned out pretty good, but after switching form 
machines I noticed that the dead center on my 200 was wearing badly.

(Note: the 200 was meant to by turned by hand, the motor I use , is way more 
rotations then the dead center was meant to handle.)   

I found an old live center that I used on my pedal lathe, (see Bill web site. 
https://www.youtube.com/watch?v=gpAz-xgLynU )

The live center has a 1/2-24 thread that holds it onto the MT-1 shaft. knowing 
this I removed it form its shaft and used a fine thread bolt to mount it onto 
my 200.  It was a simple matter of drilling out the 3/8" hole that the old dead 
center used for its mountings and making it 1/2" then screwing the bolt onto 
and in the live center.

Over all this weekend was not a total lost cause. 

A new toy and bonding time with our puppy. ;-)

 

Have a good night everyone.

talk to you all more latter.

 

C.A.G.






-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/69fe5eff-6ed5-fb1f-b6ec-faff21655e83%40earthlink.net.

RE: New live center for my 200

2023-06-26 Thread bulkeley

I don’t understand it eather 220 volt things work here and I bought a 240 to 
110v transformer on ebay for all your stuff like legacy drive motors they work 
so I don’t complain lol

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of M.W.Foscue
Sent: Tuesday, June 27, 2023 3:58 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: New live center for my 200

 

Bill,

 

We mostly use "cycles" - but on rare occasion, you will see Hz.  On electric 
appliances, motors, etc. you will see one or the other.

 

As for voltage, I see our lower voltage mentioned as any of these: 110, 115, or 
120.

And I see our higher household voltage usually mentioned as either 220 or 240. 
(Never seen mention of 230v)

 

When I was growing up (very younger years) in the Panama Canal Zone - I 
remember we had 25 cycle electricity.  Not sure if it was 110v or something 
else.  Then one day they had a truck come thru the neighborhood - and families 
could swap out their "cycles sensitive" devices - like clocks - for new ones 
that ran on 60 cycles.  Strange, huh?

 

Mac

  _  

  _  

  -Original Message-
From: mailto:legacy-ornamental-mills@googlegroups.com> >
Sent: Jun 27, 2023 1:35 AM
To: mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: RE: New live center for my 200

 

We use 240volt 50 cycles but we call cycles Hertz 

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of M.W.Foscue
Sent: Tuesday, June 27, 2023 2:41 PM
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com> 
Subject: RE: New live center for my 200

 

Bill,

 

What juice (mains?) do you run in your house/shop?

Do you have 110 and 220; or only 220 like in Europe? 

Many "home shops" in America add 220v AC/60 cycles if they didn't already have 
it before outfitting their shop.

What cycle do you have - 50?  Or 60 - like here in America?

 

Thanks.

Mac

  _  

  _  

-Original Message-
From: mailto:legacy-ornamental-mills@googlegroups.com> >
Sent: Jun 27, 2023 12:21 AM
To: mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: RE: New live center for my 200

 

You need a gas generator curt like I have power outages I just start it up and 
keep on going

 

Bill

  _  

  _  

 From: 'Curt George' via Legacy Ornamental Mills 
mailto:legacy-ornamental-mills@googlegroups.com> > 
Sent: Tuesday, June 27, 2023 11:16 AM
To: Legacy ornamental mills mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: New live center for my 200

 

Hello and good evening everyone.

 

Sunday's and Mondays are my weekends.  But sadly, We had a storm Saturday 
evening, which caused a power outage for me, The power was restored appx. 6pm 
today.  3 hours in the shop form me over a weekend is NOT normal, And I was 
having withdrawal systems. (Yes people my Feet hurt!  You see with out 
electricity the only way for me to spend my time at home is to walk our dog. We 
walked 10 miles today and even more yesterday.) ;-)

 

OK (sorry guys, I don't mean to cry over spilled milk, so to speak... This 
weekend was Horrible! )  ;-p

 

Today's shop time was meant to turn some bone blanks that I got ready for 
turning last weekend. 

 

I did one turning, which turned out pretty good, but after switching form 
machines I noticed that the dead center on my 200 was wearing badly.

(Note: the 200 was meant to by turned by hand, the motor I use , is way more 
rotations then the dead center was meant to handle.)   

I found an old live center that I used on my pedal lathe, (see Bill web site. 
https://www.youtube.com/watch?v=gpAz-xgLynU )

The live center has a 1/2-24 thread that holds it onto the MT-1 shaft. knowing 
this I removed it form its shaft and used a fine thread bolt to mount it onto 
my 200.  It was a simple matter of drilling out the 3/8" hole that the old dead 
center used for its mountings and making it 1/2" then screwing the bolt onto 
and in the live center.

Over all this weekend was not a total lost cause. 

A new toy and bonding time with our puppy. ;-)

 

Have a good night everyone.

talk to you all more latter.

 

C.A.G.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/69fe5eff-6ed5-fb1f-b6ec-faff21655e83%40earthlink.net
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/69fe5eff-6ed5-fb1f-b6ec-faff21655e83

Re: New live center for my 200

2023-06-27 Thread Joseph Greenleaf

I'm sure your dog was happy!

Joe G

On Mon, Jun 26, 2023, 9:16 PM 'Curt George' via Legacy Ornamental Mills <
legacy-ornamental-mills@googlegroups.com> wrote:

> Hello and good evening everyone.
>
> Sunday's and Mondays are my weekends.  But sadly, We had a storm Saturday
> evening, which caused a power outage for me, The power was restored appx.
> 6pm today.  3 hours in the shop form me over a weekend is NOT normal, And I
> was having withdrawal systems. (Yes people my Feet hurt!  You see with out
> electricity the only way for me to spend my time at home is to walk our
> dog. We walked 10 miles today and even more yesterday.) ;-)
>
> OK (sorry guys, I don't mean to cry over spilled milk, so to speak... This
> weekend was Horrible! )  ;-p
>
> Today's shop time was meant to turn some bone blanks that I got ready for
> turning last weekend.
>
> I did one turning, which turned out pretty good, but after switching form
> machines I noticed that the dead center on my 200 was wearing badly.
> (Note: the 200 was meant to by turned by hand, the motor I use , is way
> more rotations then the dead center was meant to handle.)
> I found an old live center that I used on my pedal lathe, (see Bill web
> site. https://www.youtube.com/watch?v=gpAz-xgLynU )
> The live center has a 1/2-24 thread that holds it onto the MT-1 shaft.
> knowing this I removed it form its shaft and used a fine thread bolt to
> mount it onto my 200.  It was a simple matter of drilling out the 3/8" hole
> that the old dead center used for its mountings and making it 1/2" then
> screwing the bolt onto and in the live center.
> Over all this weekend was not a total lost cause.
> A new toy and bonding time with our puppy. ;-)
>
> Have a good night everyone.
> talk to you all more latter.
>
> C.A.G.
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/579673123.3026508.1687828572139%40mail.yahoo.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CALhOGXiRqayhTxy7CBikZhHW9%2BkXWBMWUafP16EV1WYAQp-6sA%40mail.gmail.com.

Re: New live center for my 200

2023-06-27 Thread 'Curt George' via Legacy Ornamental Mills

"O"Yes! She was A Very Happy Puppy! ( if you could have seen her face. Big
smiles. As if she was saying, Isn't this great! Lets do it again!)
C.A.G.
On Tuesday, June 27, 2023 at 06:23:09 AM EDT, Joseph Greenleaf
wrote:

I'm sure your dog was happy!
Joe G
On Mon, Jun 26, 2023, 9:16 PM 'Curt George' via Legacy Ornamental Mills
wrote:

Re: New live center for my 200

2023-06-27 Thread Tim Ziegler

yup, we have a big one we can run with the tractor.
Though I think you might have a hard time hiding a tractor in town lol.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Mon, Jun 26, 2023 at 11:21 PM  wrote:

> You need a gas generator curt like I have power outages I just start it up
> and keep on going
>
>
>
> Bill
>
>
>
> *From:* 'Curt George' via Legacy Ornamental Mills <
> legacy-ornamental-mills@googlegroups.com>
> *Sent:* Tuesday, June 27, 2023 11:16 AM
> *To:* Legacy ornamental mills 
> *Subject:* New live center for my 200
>
>
>
> Hello and good evening everyone.
>
>
>
> Sunday's and Mondays are my weekends.  But sadly, We had a storm Saturday
> evening, which caused a power outage for me, The power was restored appx.
> 6pm today.  3 hours in the shop form me over a weekend is NOT normal, And I
> was having withdrawal systems. (Yes people my Feet hurt!  You see with out
> electricity the only way for me to spend my time at home is to walk our
> dog. We walked 10 miles today and even more yesterday.) ;-)
>
>
>
> OK (sorry guys, I don't mean to cry over spilled milk, so to speak... This
> weekend was Horrible! )  ;-p
>
>
>
> Today's shop time was meant to turn some bone blanks that I got ready for
> turning last weekend.
>
>
>
> I did one turning, which turned out pretty good, but after switching form
> machines I noticed that the dead center on my 200 was wearing badly.
>
> (Note: the 200 was meant to by turned by hand, the motor I use , is way
> more rotations then the dead center was meant to handle.)
>
> I found an old live center that I used on my pedal lathe, (see Bill web
> site. https://www.youtube.com/watch?v=gpAz-xgLynU )
>
> The live center has a 1/2-24 thread that holds it onto the MT-1 shaft.
> knowing this I removed it form its shaft and used a fine thread bolt to
> mount it onto my 200.  It was a simple matter of drilling out the 3/8" hole
> that the old dead center used for its mountings and making it 1/2" then
> screwing the bolt onto and in the live center.
>
> Over all this weekend was not a total lost cause.
>
> A new toy and bonding time with our puppy. ;-)
>
>
>
> Have a good night everyone.
>
> talk to you all more latter.
>
>
>
> C.A.G.
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/579673123.3026508.1687828572139%40mail.yahoo.com
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/000c01d9a8ae%24ca614b10%245f23e130%24%40mmnet.com.au
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHWDSwJ4dfzVM4ZCuUVYgsWawQSdnnQBFvrViE3pn%2BW_A%40mail.gmail.com.

Re: New live center for my 200

2023-06-27 Thread Tim Ziegler

lol
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Mon, Jun 26, 2023 at 11:29 PM 'Curt George' via Legacy Ornamental Mills <
legacy-ornamental-mills@googlegroups.com> wrote:

> Thanks Bill.
> I own one (Mine is propane powered/not gasoline), but its in parts at this
> time. I had an oil leak and took it apart to repair the leak, Sadly, it
> looks like I had bad timing. ;-p
>
> Have a good night.
>
> C.A.G.
>
> On Tuesday, June 27, 2023 at 12:21:18 AM EDT, 
> wrote:
>
>
> You need a gas generator curt like I have power outages I just start it up
> and keep on going
>
>
>
> Bill
>
>
>
> *From:* 'Curt George' via Legacy Ornamental Mills <
> legacy-ornamental-mills@googlegroups.com>
> *Sent:* Tuesday, June 27, 2023 11:16 AM
> *To:* Legacy ornamental mills 
> *Subject:* New live center for my 200
>
>
>
> Hello and good evening everyone.
>
>
>
> Sunday's and Mondays are my weekends.  But sadly, We had a storm Saturday
> evening, which caused a power outage for me, The power was restored appx.
> 6pm today.  3 hours in the shop form me over a weekend is NOT normal, And I
> was having withdrawal systems. (Yes people my Feet hurt!  You see with out
> electricity the only way for me to spend my time at home is to walk our
> dog. We walked 10 miles today and even more yesterday.) ;-)
>
>
>
> OK (sorry guys, I don't mean to cry over spilled milk, so to speak... This
> weekend was Horrible! )  ;-p
>
>
>
> Today's shop time was meant to turn some bone blanks that I got ready for
> turning last weekend.
>
>
>
> I did one turning, which turned out pretty good, but after switching form
> machines I noticed that the dead center on my 200 was wearing badly.
>
> (Note: the 200 was meant to by turned by hand, the motor I use , is way
> more rotations then the dead center was meant to handle.)
>
> I found an old live center that I used on my pedal lathe, (see Bill web
> site. https://www.youtube.com/watch?v=gpAz-xgLynU )
>
> The live center has a 1/2-24 thread that holds it onto the MT-1 shaft.
> knowing this I removed it form its shaft and used a fine thread bolt to
> mount it onto my 200.  It was a simple matter of drilling out the 3/8" hole
> that the old dead center used for its mountings and making it 1/2" then
> screwing the bolt onto and in the live center.
>
> Over all this weekend was not a total lost cause.
>
> A new toy and bonding time with our puppy. ;-)
>
>
>
> Have a good night everyone.
>
> talk to you all more latter.
>
>
>
> C.A.G.
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/579673123.3026508.1687828572139%40mail.yahoo.com
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/000c01d9a8ae%24ca614b10%245f23e130%24%40mmnet.com.au
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/80131890.3056120.1687840159496%40mail.yahoo.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLF_%3DthvN-4rVp_NDnLHHZQ%3DYjBMQGg0Mg_ZoU%2BGHE2z%2Bw%40mail.gmail.com.

Re: New live center for my 200

2023-06-27 Thread Tim Ziegler

Wow I don't remember all that?

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Tue, Jun 27, 2023 at 12:58 AM M.W.Foscue  wrote:

> Bill,
>
>
>
> We mostly use "cycles" - but on rare occasion, you will see Hz.  On
> electric appliances, motors, etc. you will see one or the other.
>
>
>
> As for voltage, I see our lower voltage mentioned as any of these: 110,
> 115, or 120.
>
> And I see our higher household voltage usually mentioned as either 220 or
> 240. (Never seen mention of 230v)
>
>
>
> When I was growing up (very younger years) in the Panama Canal Zone - I
> remember we had 25 cycle electricity.  Not sure if it was 110v or something
> else.  Then one day they had a truck come thru the neighborhood - and
> families could swap out their "cycles sensitive" devices - like clocks -
> for new ones that ran on 60 cycles.  Strange, huh?
>
>
>
> Mac
> --
> ------------------
>
>   -Original Message-
> From: 
> Sent: Jun 27, 2023 1:35 AM
> To: 
> Subject: RE: New live center for my 200
>
>
>
> We use 240volt 50 cycles but we call cycles Hertz
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *M.W.Foscue
> *Sent:* Tuesday, June 27, 2023 2:41 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* RE: New live center for my 200
>
>
>
> Bill,
>
>
>
> What juice (mains?) do you run in your house/shop?
>
> Do you have 110 and 220; or only 220 like in Europe?
>
> Many "home shops" in America add 220v AC/60 cycles if they didn't already
> have it before outfitting their shop.
>
> What cycle do you have - 50?  Or 60 - like here in America?
>
>
>
> Thanks.
>
> Mac
> --
> --
>
> -Original Message-
> From: 
> Sent: Jun 27, 2023 12:21 AM
> To: 
> Subject: RE: New live center for my 200
>
>
>
> You need a gas generator curt like I have power outages I just start it up
> and keep on going
>
>
>
> Bill
> --
> --
>
>  *From:* 'Curt George' via Legacy Ornamental Mills <
> legacy-ornamental-mills@googlegroups.com>
> *Sent:* Tuesday, June 27, 2023 11:16 AM
> *To:* Legacy ornamental mills 
> *Subject:* New live center for my 200
>
>
>
> Hello and good evening everyone.
>
>
>
> Sunday's and Mondays are my weekends.  But sadly, We had a storm Saturday
> evening, which caused a power outage for me, The power was restored appx.
> 6pm today.  3 hours in the shop form me over a weekend is NOT normal, And I
> was having withdrawal systems. (Yes people my Feet hurt!  You see with out
> electricity the only way for me to spend my time at home is to walk our
> dog. We walked 10 miles today and even more yesterday.) ;-)
>
>
>
> OK (sorry guys, I don't mean to cry over spilled milk, so to speak... This
> weekend was Horrible! )  ;-p
>
>
>
> Today's shop time was meant to turn some bone blanks that I got ready for
> turning last weekend.
>
>
>
> I did one turning, which turned out pretty good, but after switching form
> machines I noticed that the dead center on my 200 was wearing badly.
>
> (Note: the 200 was meant to by turned by hand, the motor I use , is way
> more rotations then the dead center was meant to handle.)
>
> I found an old live center that I used on my pedal lathe, (see Bill web
> site. https://www.youtube.com/watch?v=gpAz-xgLynU )
>
> The live center has a 1/2-24 thread that holds it onto the MT-1 shaft.
> knowing this I removed it form its shaft and used a fine thread bolt to
> mount it onto my 200.  It was a simple matter of drilling out the 3/8" hole
> that the old dead center used for its mountings and making it 1/2" then
> screwing the bolt onto and in the live center.
>
> Over all this weekend was not a total lost cause.
>
> A new toy and bonding time with our puppy. ;-)
>
>
>
> Have a good night everyone.
>
> talk to you all more latter.
>
>
>
> C.A.G.
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-o

Re: New live center for my 200

Re: New live center for my 200

Re: New live center for my 200

RE: New live center for my 200

Re: New live center for my 200

RE: New live center for my 200

RE: New live center for my 200

RE: New live center for my 200

RE: New live center for my 200

RE: New live center for my 200

Re: New live center for my 200

Re: New live center for my 200

Re: New live center for my 200

Re: New live center for my 200

Re: New live center for my 200

15 matches

Site Navigation

Mail list logo

Footer information