subject:"Re\: Feb 5 bone turnings"

Re: Feb 5 bone turnings

2024-03-02 Thread Tim Ziegler

yes I  agree a video would be good. Exciting stuff for sure.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
Ziegler Laser Worx LLC
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Sat, Mar 2, 2024 at 11:50 AM  wrote:

> Very interesting stuff curt perhaps a video some day showing it working
> would help to show us
>
>
>
> Bill
>
>
>
> *From:* 'Curt George' via Legacy Ornamental Mills <
> legacy-ornamental-mills@googlegroups.com>
> *Sent:* Saturday, March 2, 2024 4:33 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Feb 5 bone turnings
>
>
>
> Hey Guys!
>
>
>
> Bill I have a way to make this chatter wave 100% every time. but it
> involves another jig to make it work. What I did the first time is supper
> Kool, but Its not easy to get the results prefect every time.
>
> I called this cut a chatter cut, mainly due to that is exactly what is
> happening, the route bit chatters/bounces over the wood as it is cutting.
>
> There are a number of variables that are needed to make the Chatter cut
> work on the Legacy at this time it is not an exact science . (those
> variables are, speed of cut/RPM of the bit, depth of cut from the side/Y
> axis , and  Speed of the motor drive/carriage movement. all have to be the
> same, to get the good results. If one is off the cut will not be
> consistent.)
>
>
>
> C.A.G.
>
>
>
> On Friday, March 1, 2024 at 06:23:14 PM EST, 
> wrote:
>
>
>
>
>
> Well however you did it I think it needs more research I think it’s a very
> interesting look
>
>
>
> Bill
>
>
>
> *From:* 'Curt George' via Legacy Ornamental Mills <
> legacy-ornamental-mills@googlegroups.com>
> *Sent:* Saturday, March 2, 2024 1:43 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Feb 5 bone turnings
>
>
>
> Hello Bill
>
>
>
> The chatter wave was cut form the side of the work piece, I used the clime
> cutting method, (the router bit is spinning like a car tire on wet
> pavement)  Sadly I do not remember the pitch or speed I used at this time.
>
> What I do remember is the chatter happened on the first cut, I liked the
> look, so I repeated all the cut the exact way to repeat this process.
>
> Here are some more Wave' y cuts that I have made.
>
>
>
> C.A.G.
>
>
>
> On Friday, March 1, 2024 at 03:21:38 AM EST, 
> wrote:
>
>
>
>
>
> Nice chatter wave curt what pitch did you set the mill at? And what wave
> width did you set the attachment at? also how many starts? and last what
> router bit did you use to side cut that wave? And what was the blank size?
> Lots of questions I know lol sorry
>
>
>
> Bill
>
>
>
> *From:* 'Curt George' via Legacy Ornamental Mills <
> legacy-ornamental-mills@googlegroups.com>
> *Sent:* Friday, March 1, 2024 4:25 PM
> *To:* 'parr...@aol.com' via Legacy Ornamental Mills <
> legacy-ornamental-mills@googlegroups.com>
> *Subject:* Re: Feb 5 bone turnings
>
>
>
> Hello Everyone. (just got home form work.)
>
> Thank you all for the kind words.
>
>
>
> Using and Making the Wave attachment is not all that hard to do.
>
>
>
> I too enjoy the look of the waves, in wood as well as in my bone turnings.
>
> If anyone would like to know more, We can open a posting on the process of
> making
>
> one. With Tim K. Bill, and my self,(who have all made our own versions.)
> as well as a few
>
> others in the group who own the wave attachment, I'm sure anyone in the
> group could make there
>
> own. The concept of how they work, as well as the simple construction it
> takes to
>
> make a attachment. Is pretty easy.
>
>
>
> Just let me know what you all think?
>
> Here are a few photo's of both, works and attachment.
>
> C.A.G.
>
> On Thursday, February 29, 2024 at 01:48:19 PM EST, 'parr...@aol.com' via
> Legacy Ornamental Mills  wrote:
>
>
>
>
>
> Beautiful
>
> Sent from the all new AOL app for iOS
> <https://apps.apple.com/us/app/aol-news-email-weather-video/id646100661>
>
>
>
> On Thursday, February 29, 2024, 8:44 AM, 'Curt George' via Legacy
> Ornamental Mills  wrote:
>
> Good morning everyone
>
> Tim here is the photos you asked for.  I hope these photo work for you?
>
> for some reason taking photo's of these bone handles, just don't quite
> look the same as they do by eye.  The cut is .250 of an inch deep (appx.
> the same depth as a piece of paper) the wave off-set is 1/8" with a 3"
> pitch.
>
> I hope this helps?
>
>
>
> Have a good day.
>
>
>
> C.A.

RE: Feb 5 bone turnings

2024-03-02 Thread bulkeley

Very interesting stuff curt perhaps a video some day showing it working would 
help to show us

 

Bill

 

From: 'Curt George' via Legacy Ornamental Mills 
 
Sent: Saturday, March 2, 2024 4:33 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Feb 5 bone turnings

 

Hey Guys!

 

Bill I have a way to make this chatter wave 100% every time. but it involves 
another jig to make it work. What I did the first time is supper Kool, but Its 
not easy to get the results prefect every time. 

I called this cut a chatter cut, mainly due to that is exactly what is 
happening, the route bit chatters/bounces over the wood as it is cutting.

There are a number of variables that are needed to make the Chatter cut work on 
the Legacy at this time it is not an exact science . (those variables are, 
speed of cut/RPM of the bit, depth of cut from the side/Y axis , and  Speed of 
the motor drive/carriage movement. all have to be the same, to get the good 
results. If one is off the cut will not be consistent.) 

 

C.A.G.

 

On Friday, March 1, 2024 at 06:23:14 PM EST, mailto:bulke...@mmnet.com.au> > wrote: 

 

 

Well however you did it I think it needs more research I think it’s a very 
interesting look 

 

Bill

 

From: 'Curt George' via Legacy Ornamental Mills 
mailto:legacy-ornamental-mills@googlegroups.com> > 
Sent: Saturday, March 2, 2024 1:43 AM
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com> 
Subject: Re: Feb 5 bone turnings

 

Hello Bill

 

The chatter wave was cut form the side of the work piece, I used the clime 
cutting method, (the router bit is spinning like a car tire on wet pavement)  
Sadly I do not remember the pitch or speed I used at this time.

What I do remember is the chatter happened on the first cut, I liked the look, 
so I repeated all the cut the exact way to repeat this process. 

Here are some more Wave' y cuts that I have made.

 

C.A.G.

 

On Friday, March 1, 2024 at 03:21:38 AM EST, mailto:bulke...@mmnet.com.au> > wrote: 

 

 

Nice chatter wave curt what pitch did you set the mill at? And what wave width 
did you set the attachment at? also how many starts? and last what router bit 
did you use to side cut that wave? And what was the blank size? Lots of 
questions I know lol sorry

 

Bill

 

From: 'Curt George' via Legacy Ornamental Mills 
mailto:legacy-ornamental-mills@googlegroups.com> > 
Sent: Friday, March 1, 2024 4:25 PM
To: 'parr...@aol.com' via Legacy Ornamental Mills 
mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: Re: Feb 5 bone turnings

 

Hello Everyone. (just got home form work.)

Thank you all for the kind words.

 

Using and Making the Wave attachment is not all that hard to do.

 

I too enjoy the look of the waves, in wood as well as in my bone turnings.

If anyone would like to know more, We can open a posting on the process of 
making

one. With Tim K. Bill, and my self,(who have all made our own versions.) as 
well as a few 

others in the group who own the wave attachment, I'm sure anyone in the group 
could make there

own. The concept of how they work, as well as the simple construction it takes 
to 

make a attachment. Is pretty easy.

 

Just let me know what you all think?

Here are a few photo's of both, works and attachment.

C.A.G.

On Thursday, February 29, 2024 at 01:48:19 PM EST, 'parr...@aol.com' via Legacy 
Ornamental Mills mailto:legacy-ornamental-mills@googlegroups.com> > wrote: 

 

 

Beautiful 

Sent from the all new AOL app for iOS 
<https://apps.apple.com/us/app/aol-news-email-weather-video/id646100661> 

 

On Thursday, February 29, 2024, 8:44 AM, 'Curt George' via Legacy Ornamental 
Mills mailto:legacy-ornamental-mills@googlegroups.com> > wrote:

Good morning everyone

Tim here is the photos you asked for.  I hope these photo work for you?

for some reason taking photo's of these bone handles, just don't quite look the 
same as they do by eye.  The cut is .250 of an inch deep (appx. the same depth 
as a piece of paper) the wave off-set is 1/8" with a 3" pitch.

I hope this helps?

 

Have a good day.

 

C.A.G.

 

On Thursday, February 29, 2024 at 06:35:29 AM EST, Tim Ziegler 
mailto:timjzieg...@gmail.com> > wrote: 

 

 

Hey Curt,

 

Those are some extremely nice looking bone handles. 

Thanks for sharing them.  You are truely the Bone turning Master.

Can you take a close up of the one you used the wave attachment

on?  I would like to zoom in on the pattern a little bit closer. 

Great work as always. 




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

Ziegler Laser Worx LLC

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Wed, Feb 28, 2024 at 11:45 PM 'Curt George' via Legacy Ornamental Mills 
mailto:legacy-ornamental-mills@googlegroups.com> > wrote:

Hello Everyone. (Just got home form work.)

Here are some of my lat

Re: Feb 5 bone turnings

2024-03-02 Thread Tim Ziegler

Wow that's interesting to hear about Curt. I did not realize you were
creating a controlled
chatter on the LOM's. Very interesting. We will have to discuss that in
more detail for sure.
Look forward to learning more.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
Ziegler Laser Worx LLC
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Fri, Mar 1, 2024 at 11:32 PM 'Curt George' via Legacy Ornamental Mills <
legacy-ornamental-mills@googlegroups.com> wrote:

> Hey Guys!
>
> Bill I have a way to make this chatter wave 100% every time. but it
> involves another jig to make it work. What I did the first time is supper
> Kool, but Its not easy to get the results prefect every time.
> I called this cut a chatter cut, mainly due to that is exactly what is
> happening, the route bit chatters/bounces over the wood as it is cutting.
> There are a number of variables that are needed to make the Chatter cut
> work on the Legacy at this time it is not an exact science . (those
> variables are, speed of cut/RPM of the bit, depth of cut from the side/Y
> axis , and  Speed of the motor drive/carriage movement. all have to be the
> same, to get the good results. If one is off the cut will not be
> consistent.)
>
> C.A.G.
>
> On Friday, March 1, 2024 at 06:23:14 PM EST, 
> wrote:
>
>
> Well however you did it I think it needs more research I think it’s a very
> interesting look
>
>
>
> Bill
>
>
>
> *From:* 'Curt George' via Legacy Ornamental Mills <
> legacy-ornamental-mills@googlegroups.com>
> *Sent:* Saturday, March 2, 2024 1:43 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Feb 5 bone turnings
>
>
>
> Hello Bill
>
>
>
> The chatter wave was cut form the side of the work piece, I used the clime
> cutting method, (the router bit is spinning like a car tire on wet
> pavement)  Sadly I do not remember the pitch or speed I used at this time.
>
> What I do remember is the chatter happened on the first cut, I liked the
> look, so I repeated all the cut the exact way to repeat this process.
>
> Here are some more Wave' y cuts that I have made.
>
>
>
> C.A.G.
>
>
>
> On Friday, March 1, 2024 at 03:21:38 AM EST, 
> wrote:
>
>
>
>
>
> Nice chatter wave curt what pitch did you set the mill at? And what wave
> width did you set the attachment at? also how many starts? and last what
> router bit did you use to side cut that wave? And what was the blank size?
> Lots of questions I know lol sorry
>
>
>
> Bill
>
>
>
> *From:* 'Curt George' via Legacy Ornamental Mills <
> legacy-ornamental-mills@googlegroups.com>
> *Sent:* Friday, March 1, 2024 4:25 PM
> *To:* 'parr...@aol.com' via Legacy Ornamental Mills <
> legacy-ornamental-mills@googlegroups.com>
> *Subject:* Re: Feb 5 bone turnings
>
>
>
> Hello Everyone. (just got home form work.)
>
> Thank you all for the kind words.
>
>
>
> Using and Making the Wave attachment is not all that hard to do.
>
>
>
> I too enjoy the look of the waves, in wood as well as in my bone turnings.
>
> If anyone would like to know more, We can open a posting on the process of
> making
>
> one. With Tim K. Bill, and my self,(who have all made our own versions.)
> as well as a few
>
> others in the group who own the wave attachment, I'm sure anyone in the
> group could make there
>
> own. The concept of how they work, as well as the simple construction it
> takes to
>
> make a attachment. Is pretty easy.
>
>
>
> Just let me know what you all think?
>
> Here are a few photo's of both, works and attachment.
>
> C.A.G.
>
> On Thursday, February 29, 2024 at 01:48:19 PM EST, 'parr...@aol.com' via
> Legacy Ornamental Mills  wrote:
>
>
>
>
>
> Beautiful
>
> Sent from the all new AOL app for iOS
> <https://apps.apple.com/us/app/aol-news-email-weather-video/id646100661>
>
>
>
> On Thursday, February 29, 2024, 8:44 AM, 'Curt George' via Legacy
> Ornamental Mills  wrote:
>
> Good morning everyone
>
> Tim here is the photos you asked for.  I hope these photo work for you?
>
> for some reason taking photo's of these bone handles, just don't quite
> look the same as they do by eye.  The cut is .250 of an inch deep (appx.
> the same depth as a piece of paper) the wave off-set is 1/8" with a 3"
> pitch.
>
> I hope this helps?
>
>
>
> Have a good day.
>
>
>
> C.A.G.
>
>
>
> On Thursday, February 29, 2024 at 06:35:29 AM EST, Tim Ziegler <
> timjzieg...@gmail.com> wrote:
>
>
>
>
>
> Hey Curt,
>
>
>
> Those are some ext

Re: Feb 5 bone turnings

2024-03-02 Thread Rick Hutley

Wow - I now have an even greater appreciation for the results you produce On Mar 2, 2024, at 00:32, 'Curt George' via Legacy Ornamental Mills  wrote:
Hey Guys!Bill I have a way to make this chatter wave 100% every time. but it involves another jig to make it work. What I did the first time is supper Kool, but Its not easy to get the results prefect every time. I called this cut a chatter cut, mainly due to that is exactly what is happening, the route bit chatters/bounces over the wood as it is cutting.There are a number of variables that are needed to make the Chatter cut work on the Legacy at this time it is not an exact science . (those variables are, speed of cut/RPM of the bit, depth of cut from the side/Y axis , and  Speed of the motor drive/carriage movement. all have to be the same, to get the good results. If one is off the cut will not be consistent.) C.A.G.





On Friday, March 1, 2024 at 06:23:14 PM EST,   wrote:



Well however you did it I think it needs more research I think it’s a very interesting look   Bill  From: 'Curt George' via Legacy Ornamental Mills  Sent: Saturday, March 2, 2024 1:43 AMTo: legacy-ornamental-mills@googlegroups.comSubject: Re: Feb 5 bone turnings  Hello Bill  The chatter wave was cut form the side of the work piece, I used the clime cutting method, (the router bit is spinning like a car tire on wet pavement)  Sadly I do not remember the pitch or speed I used at this time.What I do remember is the chatter happened on the first cut, I liked the look, so I repeated all the cut the exact way to repeat this process. Here are some more Wave' y cuts that I have made.  C.A.G.  On Friday, March 1, 2024 at 03:21:38 AM EST, <bulke...@mmnet.com.au> wrote:     Nice chatter wave curt what pitch did you set the mill at? And what wave width did you set the attachment at? also how many starts? and last what router bit did you use to side cut that wave? And what was the blank size? Lots of questions I know lol sorry Bill From: 'Curt George' via Legacy Ornamental Mills <legacy-ornamental-mills@googlegroups.com> Sent: Friday, March 1, 2024 4:25 PMTo: 'parr...@aol.com' via Legacy Ornamental Mills <legacy-ornamental-mills@googlegroups.com>Subject: Re: Feb 5 bone turnings Hello Everyone. (just got home form work.)Thank you all for the kind words. Using and Making the Wave attachment is not all that hard to do. I too enjoy the look of the waves, in wood as well as in my bone turnings.If anyone would like to know more, We can open a posting on the process of makingone. With Tim K. Bill, and my self,(who have all made our own versions.) as well as a few others in the group who own the wave attachment, I'm sure anyone in the group could make thereown. The concept of how they work, as well as the simple construction it takes to make a attachment. Is pretty easy. Just let me know what you all think?Here are a few photo's of both, works and attachment.C.A.G.On Thursday, February 29, 2024 at 01:48:19 PM EST, 'parr...@aol.com' via Legacy Ornamental Mills <legacy-ornamental-mills@googlegroups.com> wrote:   Beautiful Sent from the all new AOL app for iOS On Thursday, February 29, 2024, 8:44 AM, 'Curt George' via Legacy Ornamental Mills <legacy-ornamental-mills@googlegroups.com> wrote:Good morning everyoneTim here is the photos you asked for.  I hope these photo work for you?for some reason taking photo's of these bone handles, just don't quite look the same as they do by eye.  The cut is .250 of an inch deep (appx. the same depth as a piece of paper) the wave off-set is 1/8" with a 3" pitch.I hope this helps? Have a good day. C.A.G. On Thursday, February 29, 2024 at 06:35:29 AM EST, Tim Ziegler <timjzieg...@gmail.com> wrote:   Hey Curt, Those are some extremely nice looking bone handles. Thanks for sharing them.  You are truely the Bone turning Master.Can you take a close up of the one you used the wave attachmenton?  I would like to zoom in on the pattern a little bit closer. Great work as always. Kind Regards, Timothy J. ZieglerZiegler WoodWork & SpecialtyZiegler Laser Worx LLC14171 160th Ave.Foreston MN 56330 320-294-5798 shop320-630-2243 cell  On Wed, Feb 28, 2024 at 11:45 PM 'Curt George' via Legacy Ornamental Mills <legacy-ornamental-mills@googlegroups.com> wrote:Hello Everyone. (Just got home form work.)Here are some of my latest turnings. I am really having a lot of fun with my Legacy. Any question or comments are, as always welcome.I am learning new tricks that are really helping me achievemy personal best. ;-) C.A.G.-- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.To view this di

Re: Feb 5 bone turnings

2024-03-01 Thread 'Curt George' via Legacy Ornamental Mills

 Hey Guys!
Bill I have a way to make this chatter wave 100% every time. but it involves 
another jig to make it work. What I did the first time is supper Kool, but Its 
not easy to get the results prefect every time. I called this cut a chatter 
cut, mainly due to that is exactly what is happening, the route bit 
chatters/bounces over the wood as it is cutting.There are a number of variables 
that are needed to make the Chatter cut work on the Legacy at this time it is 
not an exact science . (those variables are, speed of cut/RPM of the bit, depth 
of cut from the side/Y axis , and  Speed of the motor drive/carriage movement. 
all have to be the same, to get the good results. If one is off the cut will 
not be consistent.) 
C.A.G.
On Friday, March 1, 2024 at 06:23:14 PM EST,  wrote: 
 
 
 
Well however you did it I think it needs more research I think it’s a very 
interesting look 

  

Bill

  

From: 'Curt George' via Legacy Ornamental Mills 
 
Sent: Saturday, March 2, 2024 1:43 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Feb 5 bone turnings

  

Hello Bill

  

The chatter wave was cut form the side of the work piece, I used the clime 
cutting method, (the router bit is spinning like a car tire on wet pavement)  
Sadly I do not remember the pitch or speed I used at this time.

What I do remember is the chatter happened on the first cut, I liked the look, 
so I repeated all the cut the exact way to repeat this process. 

Here are some more Wave' y cuts that I have made.

  

C.A.G.

  

On Friday, March 1, 2024 at 03:21:38 AM EST,  wrote: 

  

  

Nice chatter wave curt what pitch did you set the mill at? And what wave width 
did you set the attachment at? also how many starts? and last what router bit 
did you use to side cut that wave? And what was the blank size? Lots of 
questions I know lol sorry

 

Bill

 

From: 'Curt George' via Legacy Ornamental Mills 
 
Sent: Friday, March 1, 2024 4:25 PM
To: 'parr...@aol.com' via Legacy Ornamental Mills 

Subject: Re: Feb 5 bone turnings

 

Hello Everyone. (just got home form work.)

Thank you all for the kind words.

 

Using and Making the Wave attachment is not all that hard to do.

 

I too enjoy the look of the waves, in wood as well as in my bone turnings.

If anyone would like to know more, We can open a posting on the process of 
making

one. With Tim K. Bill, and my self,(who have all made our own versions.) as 
well as a few 

others in the group who own the wave attachment, I'm sure anyone in the group 
could make there

own. The concept of how they work, as well as the simple construction it takes 
to 

make a attachment. Is pretty easy.

 

Just let me know what you all think?

Here are a few photo's of both, works and attachment.

C.A.G.

On Thursday, February 29, 2024 at 01:48:19 PM EST, 'parr...@aol.com' via Legacy 
Ornamental Mills  wrote: 

 

 

Beautiful 

Sent from the all new AOL app for iOS

 

On Thursday, February 29, 2024, 8:44 AM, 'Curt George' via Legacy Ornamental 
Mills  wrote:


Good morning everyone

Tim here is the photos you asked for.  I hope these photo work for you?

for some reason taking photo's of these bone handles, just don't quite look the 
same as they do by eye.  The cut is .250 of an inch deep (appx. the same depth 
as a piece of paper) the wave off-set is 1/8" with a 3" pitch.

I hope this helps?

 

Have a good day.

 

C.A.G.

 

On Thursday, February 29, 2024 at 06:35:29 AM EST, Tim Ziegler 
 wrote: 

 

 

Hey Curt,

 

Those are some extremely nice looking bone handles. 

Thanks for sharing them.  You are truely the Bone turning Master.

Can you take a close up of the one you used the wave attachment

on?  I would like to zoom in on the pattern a little bit closer. 

Great work as always. 




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

Ziegler Laser Worx LLC

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Wed, Feb 28, 2024 at 11:45 PM 'Curt George' via Legacy Ornamental Mills 
 wrote:


Hello Everyone. (Just got home form work.)

Here are some of my latest turnings. 

I am really having a lot of fun with my Legacy.

 

Any question or comments are, as always welcome.

I am learning new tricks that are really helping me achieve

my personal best. ;-)

 

C.A.G.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/253088644.1267098.1709185539973%40mail.yahoo.com.


-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+uns

RE: Feb 5 bone turnings

2024-03-01 Thread bulkeley

Well however you did it I think it needs more research I think it’s a very 
interesting look 

 

Bill

 

From: 'Curt George' via Legacy Ornamental Mills 
 
Sent: Saturday, March 2, 2024 1:43 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Feb 5 bone turnings

 

Hello Bill

 

The chatter wave was cut form the side of the work piece, I used the clime 
cutting method, (the router bit is spinning like a car tire on wet pavement)  
Sadly I do not remember the pitch or speed I used at this time.

What I do remember is the chatter happened on the first cut, I liked the look, 
so I repeated all the cut the exact way to repeat this process. 

Here are some more Wave' y cuts that I have made.

 

C.A.G.

 

On Friday, March 1, 2024 at 03:21:38 AM EST, mailto:bulke...@mmnet.com.au> > wrote: 

 

 

Nice chatter wave curt what pitch did you set the mill at? And what wave width 
did you set the attachment at? also how many starts? and last what router bit 
did you use to side cut that wave? And what was the blank size? Lots of 
questions I know lol sorry

 

Bill

 

From: 'Curt George' via Legacy Ornamental Mills 
mailto:legacy-ornamental-mills@googlegroups.com> > 
Sent: Friday, March 1, 2024 4:25 PM
To: 'parr...@aol.com' via Legacy Ornamental Mills 
mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: Re: Feb 5 bone turnings

 

Hello Everyone. (just got home form work.)

Thank you all for the kind words.

 

Using and Making the Wave attachment is not all that hard to do.

 

I too enjoy the look of the waves, in wood as well as in my bone turnings.

If anyone would like to know more, We can open a posting on the process of 
making

one. With Tim K. Bill, and my self,(who have all made our own versions.) as 
well as a few 

others in the group who own the wave attachment, I'm sure anyone in the group 
could make there

own. The concept of how they work, as well as the simple construction it takes 
to 

make a attachment. Is pretty easy.

 

Just let me know what you all think?

Here are a few photo's of both, works and attachment.

C.A.G.

On Thursday, February 29, 2024 at 01:48:19 PM EST, 'parr...@aol.com' via Legacy 
Ornamental Mills mailto:legacy-ornamental-mills@googlegroups.com> > wrote: 

 

 

Beautiful 

Sent from the all new AOL app for iOS 
<https://apps.apple.com/us/app/aol-news-email-weather-video/id646100661> 

 

On Thursday, February 29, 2024, 8:44 AM, 'Curt George' via Legacy Ornamental 
Mills mailto:legacy-ornamental-mills@googlegroups.com> > wrote:

Good morning everyone

Tim here is the photos you asked for.  I hope these photo work for you?

for some reason taking photo's of these bone handles, just don't quite look the 
same as they do by eye.  The cut is .250 of an inch deep (appx. the same depth 
as a piece of paper) the wave off-set is 1/8" with a 3" pitch.

I hope this helps?

 

Have a good day.

 

C.A.G.

 

On Thursday, February 29, 2024 at 06:35:29 AM EST, Tim Ziegler 
mailto:timjzieg...@gmail.com> > wrote: 

 

 

Hey Curt,

 

Those are some extremely nice looking bone handles. 

Thanks for sharing them.  You are truely the Bone turning Master.

Can you take a close up of the one you used the wave attachment

on?  I would like to zoom in on the pattern a little bit closer. 

Great work as always. 




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

Ziegler Laser Worx LLC

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Wed, Feb 28, 2024 at 11:45 PM 'Curt George' via Legacy Ornamental Mills 
mailto:legacy-ornamental-mills@googlegroups.com> > wrote:

Hello Everyone. (Just got home form work.)

Here are some of my latest turnings. 

I am really having a lot of fun with my Legacy.

 

Any question or comments are, as always welcome.

I am learning new tricks that are really helping me achieve

my personal best. ;-)

 

C.A.G.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/253088644.1267098.1709185539973%40mail.yahoo.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/253088644.1267098.1709185539973%40mail.yahoo.com?utm_medium=email_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/

Re: Feb 5 bone turnings

2024-03-01 Thread Tim Ziegler

Hey Bill questions just keep the conversation interesting. Nothing wrong
with that. lol.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
Ziegler Laser Worx LLC
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Fri, Mar 1, 2024 at 2:21 AM  wrote:

> Nice chatter wave curt what pitch did you set the mill at? And what wave
> width did you set the attachment at? also how many starts? and last what
> router bit did you use to side cut that wave? And what was the blank size?
> Lots of questions I know lol sorry
>
>
>
> Bill
>
>
>
> *From:* 'Curt George' via Legacy Ornamental Mills <
> legacy-ornamental-mills@googlegroups.com>
> *Sent:* Friday, March 1, 2024 4:25 PM
> *To:* 'parr...@aol.com' via Legacy Ornamental Mills <
> legacy-ornamental-mills@googlegroups.com>
> *Subject:* Re: Feb 5 bone turnings
>
>
>
> Hello Everyone. (just got home form work.)
>
> Thank you all for the kind words.
>
>
>
> Using and Making the Wave attachment is not all that hard to do.
>
>
>
> I too enjoy the look of the waves, in wood as well as in my bone turnings.
>
> If anyone would like to know more, We can open a posting on the process of
> making
>
> one. With Tim K. Bill, and my self,(who have all made our own versions.)
> as well as a few
>
> others in the group who own the wave attachment, I'm sure anyone in the
> group could make there
>
> own. The concept of how they work, as well as the simple construction it
> takes to
>
> make a attachment. Is pretty easy.
>
>
>
> Just let me know what you all think?
>
> Here are a few photo's of both, works and attachment.
>
> C.A.G.
>
> On Thursday, February 29, 2024 at 01:48:19 PM EST, 'parr...@aol.com' via
> Legacy Ornamental Mills  wrote:
>
>
>
>
>
> Beautiful
>
> Sent from the all new AOL app for iOS
> <https://apps.apple.com/us/app/aol-news-email-weather-video/id646100661>
>
>
>
> On Thursday, February 29, 2024, 8:44 AM, 'Curt George' via Legacy
> Ornamental Mills  wrote:
>
> Good morning everyone
>
> Tim here is the photos you asked for.  I hope these photo work for you?
>
> for some reason taking photo's of these bone handles, just don't quite
> look the same as they do by eye.  The cut is .250 of an inch deep (appx.
> the same depth as a piece of paper) the wave off-set is 1/8" with a 3"
> pitch.
>
> I hope this helps?
>
>
>
> Have a good day.
>
>
>
> C.A.G.
>
>
>
> On Thursday, February 29, 2024 at 06:35:29 AM EST, Tim Ziegler <
> timjzieg...@gmail.com> wrote:
>
>
>
>
>
> Hey Curt,
>
>
>
> Those are some extremely nice looking bone handles.
>
> Thanks for sharing them.  You are truely the Bone turning Master.
>
> Can you take a close up of the one you used the wave attachment
>
> on?  I would like to zoom in on the pattern a little bit closer.
>
> Great work as always.
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> Ziegler Laser Worx LLC
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Wed, Feb 28, 2024 at 11:45 PM 'Curt George' via Legacy Ornamental Mills
>  wrote:
>
> Hello Everyone. (Just got home form work.)
>
> Here are some of my latest turnings.
>
> I am really having a lot of fun with my Legacy.
>
>
>
> Any question or comments are, as always welcome.
>
> I am learning new tricks that are really helping me achieve
>
> my personal best. ;-)
>
>
>
> C.A.G.
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/253088644.1267098.1709185539973%40mail.yahoo.com
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/253088644.1267098.1709185539973%40mail.yahoo.com?utm_medium=email_source=footer>
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHQRoGuHokz28RU2GK7saH_8hn-aZYodDe6%3DGOfWoOjVg%40mail.gmail.com
> <https://groups.go

Re: Feb 5 bone turnings

2024-03-01 Thread Tim Ziegler

The wave attachment is super cool. I may dig mine out this weekend too.
Just to play. Thanks for sharing.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
Ziegler Laser Worx LLC
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Thu, Feb 29, 2024 at 11:25 PM 'Curt George' via Legacy Ornamental Mills <
legacy-ornamental-mills@googlegroups.com> wrote:

> Hello Everyone. (just got home form work.)
> Thank you all for the kind words.
>
> Using and Making the Wave attachment is not all that hard to do.
>
> I too enjoy the look of the waves, in wood as well as in my bone turnings.
> If anyone would like to know more, We can open a posting on the process of
> making
> one. With Tim K. Bill, and my self,(who have all made our own versions.)
> as well as a few
> others in the group who own the wave attachment, I'm sure anyone in the
> group could make there
> own. The concept of how they work, as well as the simple construction it
> takes to
> make a attachment. Is pretty easy.
>
> Just let me know what you all think?
> Here are a few photo's of both, works and attachment.
> C.A.G.
> On Thursday, February 29, 2024 at 01:48:19 PM EST, 'parr...@aol.com' via
> Legacy Ornamental Mills  wrote:
>
>
> Beautiful
>
>
> Sent from the all new AOL app for iOS
> 
>
> On Thursday, February 29, 2024, 8:44 AM, 'Curt George' via Legacy
> Ornamental Mills  wrote:
>
> Good morning everyone
> Tim here is the photos you asked for.  I hope these photo work for you?
> for some reason taking photo's of these bone handles, just don't quite
> look the same as they do by eye.  The cut is .250 of an inch deep (appx.
> the same depth as a piece of paper) the wave off-set is 1/8" with a 3"
> pitch.
> I hope this helps?
>
> Have a good day.
>
> C.A.G.
>
> On Thursday, February 29, 2024 at 06:35:29 AM EST, Tim Ziegler <
> timjzieg...@gmail.com> wrote:
>
>
> Hey Curt,
>
> Those are some extremely nice looking bone handles.
> Thanks for sharing them.  You are truely the Bone turning Master.
> Can you take a close up of the one you used the wave attachment
> on?  I would like to zoom in on the pattern a little bit closer.
> Great work as always.
>
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> Ziegler Laser Worx LLC
> 14171 160th Ave.
> Foreston MN 56330
>
> 320-294-5798 shop
> 320-630-2243 cell
>
>
> On Wed, Feb 28, 2024 at 11:45 PM 'Curt George' via Legacy Ornamental Mills
>  wrote:
>
> Hello Everyone. (Just got home form work.)
> Here are some of my latest turnings.
> I am really having a lot of fun with my Legacy.
>
> Any question or comments are, as always welcome.
> I am learning new tricks that are really helping me achieve
> my personal best. ;-)
>
> C.A.G.
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/253088644.1267098.1709185539973%40mail.yahoo.com
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHQRoGuHokz28RU2GK7saH_8hn-aZYodDe6%3DGOfWoOjVg%40mail.gmail.com
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/414358743.1323126.1709214276991%40mail.yahoo.com
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/491761846.1954023.1709232490150%40mail.yahoo.com
>

RE: Feb 5 bone turnings

2024-03-01 Thread bulkeley

Nice chatter wave curt what pitch did you set the mill at? And what wave width 
did you set the attachment at? also how many starts? and last what router bit 
did you use to side cut that wave? And what was the blank size? Lots of 
questions I know lol sorry

 

Bill

 

From: 'Curt George' via Legacy Ornamental Mills 
 
Sent: Friday, March 1, 2024 4:25 PM
To: 'parr...@aol.com' via Legacy Ornamental Mills 

Subject: Re: Feb 5 bone turnings

 

Hello Everyone. (just got home form work.)

Thank you all for the kind words.

 

Using and Making the Wave attachment is not all that hard to do.

 

I too enjoy the look of the waves, in wood as well as in my bone turnings.

If anyone would like to know more, We can open a posting on the process of 
making

one. With Tim K. Bill, and my self,(who have all made our own versions.) as 
well as a few 

others in the group who own the wave attachment, I'm sure anyone in the group 
could make there

own. The concept of how they work, as well as the simple construction it takes 
to 

make a attachment. Is pretty easy.

 

Just let me know what you all think?

Here are a few photo's of both, works and attachment.

C.A.G.

On Thursday, February 29, 2024 at 01:48:19 PM EST, 'parr...@aol.com' via Legacy 
Ornamental Mills mailto:legacy-ornamental-mills@googlegroups.com> > wrote: 

 

 

Beautiful 



Sent from the all new AOL app for iOS 
<https://apps.apple.com/us/app/aol-news-email-weather-video/id646100661> 

 

On Thursday, February 29, 2024, 8:44 AM, 'Curt George' via Legacy Ornamental 
Mills mailto:legacy-ornamental-mills@googlegroups.com> > wrote:

Good morning everyone

Tim here is the photos you asked for.  I hope these photo work for you?

for some reason taking photo's of these bone handles, just don't quite look the 
same as they do by eye.  The cut is .250 of an inch deep (appx. the same depth 
as a piece of paper) the wave off-set is 1/8" with a 3" pitch.

I hope this helps?

 

Have a good day.

 

C.A.G.

 

On Thursday, February 29, 2024 at 06:35:29 AM EST, Tim Ziegler 
mailto:timjzieg...@gmail.com> > wrote: 

 

 

Hey Curt,

 

Those are some extremely nice looking bone handles. 

Thanks for sharing them.  You are truely the Bone turning Master.

Can you take a close up of the one you used the wave attachment

on?  I would like to zoom in on the pattern a little bit closer. 

Great work as always. 




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

Ziegler Laser Worx LLC

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Wed, Feb 28, 2024 at 11:45 PM 'Curt George' via Legacy Ornamental Mills 
mailto:legacy-ornamental-mills@googlegroups.com> > wrote:

Hello Everyone. (Just got home form work.)

Here are some of my latest turnings. 

I am really having a lot of fun with my Legacy.

 

Any question or comments are, as always welcome.

I am learning new tricks that are really helping me achieve

my personal best. ;-)

 

C.A.G.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/253088644.1267098.1709185539973%40mail.yahoo.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/253088644.1267098.1709185539973%40mail.yahoo.com?utm_medium=email_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHQRoGuHokz28RU2GK7saH_8hn-aZYodDe6%3DGOfWoOjVg%40mail.gmail.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHQRoGuHokz28RU2GK7saH_8hn-aZYodDe6%3DGOfWoOjVg%40mail.gmail.com?utm_medium=email_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/414358743.1323126.1709214276991%40mail.yahoo.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/414358743.1323126.1709214276991%40mail.yahoo.com?utm_medium=email_source=footer>
 .

-- 
You received this message be

Re: Feb 5 bone turnings

2024-02-29 Thread 'parr...@aol.com' via Legacy Ornamental Mills

Beautiful

Sent from the all new AOL app for iOS

On Thursday, February 29, 2024, 8:44 AM, 'Curt George' via Legacy Ornamental
Mills wrote:

Good morning everyoneTim here is the photos you asked for. I hope these photo
work for you?for some reason taking photo's of these bone handles, just don't
quite look the same as they do by eye. The cut is .250 of an inch deep (appx.
the same depth as a piece of paper) the wave off-set is 1/8" with a 3" pitch.I
hope this helps?
Have a good day.
C.A.G.
On Thursday, February 29, 2024 at 06:35:29 AM EST, Tim Ziegler
wrote:

Hey Curt,
Those are some extremely nice looking bone handles. Thanks for sharing them.
You are truely the Bone turning Master.Can you take a close up of the one you
used the wave attachmenton? I would like to zoom in on the pattern a little
bit closer. Great work as always.
Kind Regards,
Timothy J. ZieglerZiegler WoodWork & SpecialtyZiegler Laser Worx LLC14171 160th
Ave.Foreston MN 56330
320-294-5798 shop320-630-2243 cell

On Wed, Feb 28, 2024 at 11:45 PM 'Curt George' via Legacy Ornamental Mills
wrote:

Hello Everyone. (Just got home form work.)Here are some of my latest turnings.
I am really having a lot of fun with my Legacy.
Any question or comments are, as always welcome.I am learning new tricks that
are really helping me achievemy personal best. ;-)
C.A.G.

--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/253088644.1267098.1709185539973%40mail.yahoo.com.

Re: Feb 5 bone turnings

2024-02-29 Thread Ccm Ccm

Curt, some very nice work

On Wednesday, February 28, 2024, 'Curt George' via Legacy Ornamental Mills <
legacy-ornamental-mills@googlegroups.com> wrote:

> Hello Everyone. (Just got home form work.)
> Here are some of my latest turnings.
> I am really having a lot of fun with my Legacy.
>
> Any question or comments are, as always welcome.
> I am learning new tricks that are really helping me achieve
> my personal best. ;-)
>
> C.A.G.
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit https://groups.google.com/d/
> msgid/legacy-ornamental-mills/253088644.1267098.
> 1709185539973%40mail.yahoo.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CABP3DRHjTUVFm07%2BybMYXpbys88K3qZ4-HqHeQh99OqpN%2BZ2sw%40mail.gmail.com.

Re: Feb 5 bone turnings

2024-02-29 Thread Bob Mark

Very nice work..it’s amazing seeing your talent. Thanks for sharing.Sent from Bob Mark's iPadOn Feb 29, 2024, at 7:04 AM, Tim Ziegler  wrote:yeah now one can really see it up close and personal. Kind Regards,Timothy J. ZieglerZiegler WoodWork & SpecialtyZiegler Laser Worx LLC14171 160th Ave.Foreston MN 56330320-294-5798 shop320-630-2243 cellOn Thu, Feb 29, 2024 at 8:18 AM <bulke...@mmnet.com.au> wrote:try this one i enlarged for you Bill From: legacy-ornamental-mills@googlegroups.com <legacy-ornamental-mills@googlegroups.com> On Behalf Of Tim ZieglerSent: Thursday, February 29, 2024 10:35 PMTo: legacy-ornamental-mills@googlegroups.comSubject: Re: Feb 5 bone turnings Hey Curt, Those are some extremely nice looking bone handles. Thanks for sharing them.  You are truely the Bone turning Master.Can you take a close up of the one you used the wave attachmenton?  I would like to zoom in on the pattern a little bit closer. Great work as always. Kind Regards, Timothy J. ZieglerZiegler WoodWork & SpecialtyZiegler Laser Worx LLC14171 160th Ave.Foreston MN 56330 320-294-5798 shop320-630-2243 cell  On Wed, Feb 28, 2024 at 11:45 PM 'Curt George' via Legacy Ornamental Mills <legacy-ornamental-mills@googlegroups.com> wrote:Hello Everyone. (Just got home form work.)Here are some of my latest turnings. I am really having a lot of fun with my Legacy. Any question or comments are, as always welcome.I am learning new tricks that are really helping me achievemy personal best. ;-) C.A.G.-- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/253088644.1267098.1709185539973%40mail.yahoo.com.-- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHQRoGuHokz28RU2GK7saH_8hn-aZYodDe6%3DGOfWoOjVg%40mail.gmail.com.



-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/01da6b1a%2418eeb5f0%244acc21d0%24%40mmnet.com.au.




-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEV9wHKdVNJQMi4R8w%3DANY160XfLaFiPN4VtYLD4weOXw%40mail.gmail.com.




-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/3B70677A-AC90-4A58-894B-5A20ADEB11AE%40gmail.com.

Re: Feb 5 bone turnings

2024-02-29 Thread Tim Ziegler

yeah now one can really see it up close and personal.
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
Ziegler Laser Worx LLC
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Thu, Feb 29, 2024 at 8:18 AM  wrote:

> try this one i enlarged for you
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Thursday, February 29, 2024 10:35 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Feb 5 bone turnings
>
>
>
> Hey Curt,
>
>
>
> Those are some extremely nice looking bone handles.
>
> Thanks for sharing them.  You are truely the Bone turning Master.
>
> Can you take a close up of the one you used the wave attachment
>
> on?  I would like to zoom in on the pattern a little bit closer.
>
> Great work as always.
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> Ziegler Laser Worx LLC
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Wed, Feb 28, 2024 at 11:45 PM 'Curt George' via Legacy Ornamental
> Mills  wrote:
>
> Hello Everyone. (Just got home form work.)
>
> Here are some of my latest turnings.
>
> I am really having a lot of fun with my Legacy.
>
>
>
> Any question or comments are, as always welcome.
>
> I am learning new tricks that are really helping me achieve
>
> my personal best. ;-)
>
>
>
> C.A.G.
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/253088644.1267098.1709185539973%40mail.yahoo.com
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/253088644.1267098.1709185539973%40mail.yahoo.com?utm_medium=email_source=footer>
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHQRoGuHokz28RU2GK7saH_8hn-aZYodDe6%3DGOfWoOjVg%40mail.gmail.com
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHQRoGuHokz28RU2GK7saH_8hn-aZYodDe6%3DGOfWoOjVg%40mail.gmail.com?utm_medium=email_source=footer>
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/01da6b1a%2418eeb5f0%244acc21d0%24%40mmnet.com.au
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/01da6b1a%2418eeb5f0%244acc21d0%24%40mmnet.com.au?utm_medium=email_source=footer>
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEV9wHKdVNJQMi4R8w%3DANY160XfLaFiPN4VtYLD4weOXw%40mail.gmail.com.

Re: Feb 5 bone turnings

2024-02-29 Thread Tim Ziegler

thanks Bill
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
Ziegler Laser Worx LLC
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Thu, Feb 29, 2024 at 8:18 AM  wrote:

> try this one i enlarged for you
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Thursday, February 29, 2024 10:35 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Feb 5 bone turnings
>
>
>
> Hey Curt,
>
>
>
> Those are some extremely nice looking bone handles.
>
> Thanks for sharing them.  You are truely the Bone turning Master.
>
> Can you take a close up of the one you used the wave attachment
>
> on?  I would like to zoom in on the pattern a little bit closer.
>
> Great work as always.
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> Ziegler Laser Worx LLC
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Wed, Feb 28, 2024 at 11:45 PM 'Curt George' via Legacy Ornamental
> Mills  wrote:
>
> Hello Everyone. (Just got home form work.)
>
> Here are some of my latest turnings.
>
> I am really having a lot of fun with my Legacy.
>
>
>
> Any question or comments are, as always welcome.
>
> I am learning new tricks that are really helping me achieve
>
> my personal best. ;-)
>
>
>
> C.A.G.
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/253088644.1267098.1709185539973%40mail.yahoo.com
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/253088644.1267098.1709185539973%40mail.yahoo.com?utm_medium=email_source=footer>
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHQRoGuHokz28RU2GK7saH_8hn-aZYodDe6%3DGOfWoOjVg%40mail.gmail.com
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHQRoGuHokz28RU2GK7saH_8hn-aZYodDe6%3DGOfWoOjVg%40mail.gmail.com?utm_medium=email_source=footer>
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/01da6b1a%2418eeb5f0%244acc21d0%24%40mmnet.com.au
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/01da6b1a%2418eeb5f0%244acc21d0%24%40mmnet.com.au?utm_medium=email_source=footer>
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLH_i9Oxo4Xyw40NfhMFBhLdDoudzOBqCkrCD6PgmgsZUQ%40mail.gmail.com.

Re: Feb 5 bone turnings

2024-02-29 Thread cdkr...@gmail.com

I'm impressed.
DanK

On Thursday, February 29, 2024 at 9:18:15 AM UTC-5 bulk...@mmnet.com.au 
wrote:

> try this one i enlarged for you 
>
> Bill
>
>  
>
> *From:* legacy-orna...@googlegroups.com  *On 
> Behalf Of *Tim Ziegler
> *Sent:* Thursday, February 29, 2024 10:35 PM
> *To:* legacy-orna...@googlegroups.com
> *Subject:* Re: Feb 5 bone turnings
>
>  
>
> Hey Curt,
>
>  
>
> Those are some extremely nice looking bone handles. 
>
> Thanks for sharing them.  You are truely the Bone turning Master.
>
> Can you take a close up of the one you used the wave attachment
>
> on?  I would like to zoom in on the pattern a little bit closer. 
>
> Great work as always. 
>
>
> Kind Regards,
>
>  
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> Ziegler Laser Worx LLC
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>  
>
> 320-294-5798 <(320)%20294-5798> shop
>
> 320-630-2243 <(320)%20630-2243> cell
>
>  
>
>  
>
> On Wed, Feb 28, 2024 at 11:45 PM 'Curt George' via Legacy Ornamental 
> Mills  wrote:
>
> Hello Everyone. (Just got home form work.)
>
> Here are some of my latest turnings. 
>
> I am really having a lot of fun with my Legacy.
>
>  
>
> Any question or comments are, as always welcome.
>
> I am learning new tricks that are really helping me achieve
>
> my personal best. ;-)
>
>  
>
> C.A.G.
>
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to legacy-ornamental...@googlegroups.com.
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/legacy-ornamental-mills/253088644.1267098.1709185539973%40mail.yahoo.com
>  
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/253088644.1267098.1709185539973%40mail.yahoo.com?utm_medium=email_source=footer>
> .
>
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to legacy-ornamental...@googlegroups.com.
>
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHQRoGuHokz28RU2GK7saH_8hn-aZYodDe6%3DGOfWoOjVg%40mail.gmail.com
>  
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHQRoGuHokz28RU2GK7saH_8hn-aZYodDe6%3DGOfWoOjVg%40mail.gmail.com?utm_medium=email_source=footer>
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1415a747-8279-4643-ab25-f87b342bcfa0n%40googlegroups.com.

RE: Feb 5 bone turnings

2024-02-29 Thread bulkeley

try this one i enlarged for you 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Thursday, February 29, 2024 10:35 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Feb 5 bone turnings

 

Hey Curt,

 

Those are some extremely nice looking bone handles. 

Thanks for sharing them.  You are truely the Bone turning Master.

Can you take a close up of the one you used the wave attachment

on?  I would like to zoom in on the pattern a little bit closer. 

Great work as always. 




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

Ziegler Laser Worx LLC

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Wed, Feb 28, 2024 at 11:45 PM 'Curt George' via Legacy Ornamental Mills 
mailto:legacy-ornamental-mills@googlegroups.com> > wrote:

Hello Everyone. (Just got home form work.)

Here are some of my latest turnings. 

I am really having a lot of fun with my Legacy.

 

Any question or comments are, as always welcome.

I am learning new tricks that are really helping me achieve

my personal best. ;-)

 

C.A.G.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/253088644.1267098.1709185539973%40mail.yahoo.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/253088644.1267098.1709185539973%40mail.yahoo.com?utm_medium=email_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHQRoGuHokz28RU2GK7saH_8hn-aZYodDe6%3DGOfWoOjVg%40mail.gmail.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHQRoGuHokz28RU2GK7saH_8hn-aZYodDe6%3DGOfWoOjVg%40mail.gmail.com?utm_medium=email_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/01da6b1a%2418eeb5f0%244acc21d0%24%40mmnet.com.au.

Re: Feb 5 bone turnings

2024-02-29 Thread Tim Ziegler

Very nice Curt. I really like that look.
Thanks again for sharing it.
Really sparks me to get out and put on the wave attachment and do something
again.
I have some discs I could glue up too.


Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
Ziegler Laser Worx LLC
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Thu, Feb 29, 2024 at 7:44 AM 'Curt George' via Legacy Ornamental Mills <
legacy-ornamental-mills@googlegroups.com> wrote:

> Good morning everyone
> Tim here is the photos you asked for.  I hope these photo work for you?
> for some reason taking photo's of these bone handles, just don't quite
> look the same as they do by eye.  The cut is .250 of an inch deep (appx.
> the same depth as a piece of paper) the wave off-set is 1/8" with a 3"
> pitch.
> I hope this helps?
>
> Have a good day.
>
> C.A.G.
>
> On Thursday, February 29, 2024 at 06:35:29 AM EST, Tim Ziegler <
> timjzieg...@gmail.com> wrote:
>
>
> Hey Curt,
>
> Those are some extremely nice looking bone handles.
> Thanks for sharing them.  You are truely the Bone turning Master.
> Can you take a close up of the one you used the wave attachment
> on?  I would like to zoom in on the pattern a little bit closer.
> Great work as always.
>
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> Ziegler Laser Worx LLC
> 14171 160th Ave.
> Foreston MN 56330
>
> 320-294-5798 shop
> 320-630-2243 cell
>
>
> On Wed, Feb 28, 2024 at 11:45 PM 'Curt George' via Legacy Ornamental Mills
>  wrote:
>
> Hello Everyone. (Just got home form work.)
> Here are some of my latest turnings.
> I am really having a lot of fun with my Legacy.
>
> Any question or comments are, as always welcome.
> I am learning new tricks that are really helping me achieve
> my personal best. ;-)
>
> C.A.G.
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/253088644.1267098.1709185539973%40mail.yahoo.com
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHQRoGuHokz28RU2GK7saH_8hn-aZYodDe6%3DGOfWoOjVg%40mail.gmail.com
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/414358743.1323126.1709214276991%40mail.yahoo.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHMJu6rA4AcV5WpZfjguhAQnwj-swRqetFnrS9qRVNBvw%40mail.gmail.com.

Re: Feb 5 bone turnings

2024-02-29 Thread Tim Ziegler

Hey Curt,

Those are some extremely nice looking bone handles.
Thanks for sharing them.  You are truely the Bone turning Master.
Can you take a close up of the one you used the wave attachment
on?  I would like to zoom in on the pattern a little bit closer.
Great work as always.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
Ziegler Laser Worx LLC
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell

On Wed, Feb 28, 2024 at 11:45 PM 'Curt George' via Legacy Ornamental Mills <
legacy-ornamental-mills@googlegroups.com> wrote:

> Hello Everyone. (Just got home form work.)
> Here are some of my latest turnings.
> I am really having a lot of fun with my Legacy.
>
> Any question or comments are, as always welcome.
> I am learning new tricks that are really helping me achieve
> my personal best. ;-)
>
> C.A.G.
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/253088644.1267098.1709185539973%40mail.yahoo.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHQRoGuHokz28RU2GK7saH_8hn-aZYodDe6%3DGOfWoOjVg%40mail.gmail.com.

Re: Feb 5 bone turnings

2024-02-28 Thread 'Curt George' via Legacy Ornamental Mills

 Thank you Bill.
Perhaps one day I will sell some of my works?In truth I feel my skills are 
getting better. I'm learning new tricks to make my Legacywork beyond with I 
could do in the past. Its not hard, its just learning different ways to get the 
jobdone. ;-)
C.A.G.
On Thursday, February 29, 2024 at 01:21:25 AM EST,  
wrote:  
 
 
These are well and truly good enough to sell curt why not make a few bucks from 
them now 

As always fantastic work

  

Bill

  

From: 'Curt George' via Legacy Ornamental Mills 
 
Sent: Thursday, February 29, 2024 4:46 PM
To: Legacy ornamental mills 
Subject: Feb 5 bone turnings

  

Hello Everyone. (Just got home form work.)

Here are some of my latest turnings. 

I am really having a lot of fun with my Legacy.

  

Any question or comments are, as always welcome.

I am learning new tricks that are really helping me achieve

my personal best. ;-)

  

C.A.G.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/253088644.1267098.1709185539973%40mail.yahoo.com.


-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/01da6ad7%2476f4ab70%2464de0250%24%40mmnet.com.au.
  

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1647916697.1270743.1709188413879%40mail.yahoo.com.

RE: Feb 5 bone turnings

2024-02-28 Thread bulkeley

These are well and truly good enough to sell curt why not make a few bucks from 
them now 

As always fantastic work

 

Bill

 

From: 'Curt George' via Legacy Ornamental Mills 
 
Sent: Thursday, February 29, 2024 4:46 PM
To: Legacy ornamental mills 
Subject: Feb 5 bone turnings

 

Hello Everyone. (Just got home form work.)

Here are some of my latest turnings. 

I am really having a lot of fun with my Legacy.

 

Any question or comments are, as always welcome.

I am learning new tricks that are really helping me achieve

my personal best. ;-)

 

C.A.G.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/253088644.1267098.1709185539973%40mail.yahoo.com
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/01da6ad7%2476f4ab70%2464de0250%24%40mmnet.com.au.

Re: Feb 5 bone turnings

RE: Feb 5 bone turnings

Re: Feb 5 bone turnings

Re: Feb 5 bone turnings

Re: Feb 5 bone turnings

RE: Feb 5 bone turnings

Re: Feb 5 bone turnings

Re: Feb 5 bone turnings

RE: Feb 5 bone turnings

Re: Feb 5 bone turnings

Re: Feb 5 bone turnings

Re: Feb 5 bone turnings

Re: Feb 5 bone turnings

Re: Feb 5 bone turnings

Re: Feb 5 bone turnings

RE: Feb 5 bone turnings

Re: Feb 5 bone turnings

Re: Feb 5 bone turnings

Re: Feb 5 bone turnings

RE: Feb 5 bone turnings

20 matches

Site Navigation

Mail list logo

Footer information