RE: REVO Help

[bulkeley]

Richard don’t knock the shorter 900 too much I will be good for rotary table 
work you will get more height for it over the revo and a larger dia

Bill

 

 

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Richard Ellis
Sent: Monday, 29 July 2019 4:38 PM
To: Legacy Ornamental Mills 
Subject: Re: REVO Help

 

Hi Tim

I think there is a mix up. I have all the pen making equipment and as for the 
large chuck  adapter, that was made by me when I had a metal work lathe

I had no problems cutting threads ,welding or other things that were needed to 
improve the LOM's

I just can't see  myself rushing out to buy a 200  

The larger chuck with all the different jaws came with a fitting to fit my 
normal wood lathe , that I hardly use. I am not into bowl turning and I try to 
make the Revo do all I need

Now like Bill, I have increased the rail length (from the 900 ) it is a better 
tool.

I do not know what the 900 will be like when fitted with the shorter Revo rails 
and leadscrew probably a disaster???

Regards

Richard

On Monday, July 29, 2019 at 6:12:12 AM UTC+1, aussiman wrote:

Nice one master yoda as always you are the man Tim

 

Bill

 

From: legacy-orna...@googlegroups.com   
 > On Behalf Of Tim Krause
Sent: Monday, 29 July 2019 2:28 PM
To: Legacy Ornamental Mills  >
Subject: Re: REVO Help

 

Hi Richard,

This is really nerdy stuff, but here it goes. Legacy on the model 200 came with 
the option of a pen mandrel that screwed into the spindle. Then pen mandrel was 
proprietary to the 200. So when they started offering the revo, they made a 
change to the spindle that would be able to take a standard to the USA drill 
chuck and that was used to hold a standard pen mandrel that every woodturning 
supplier sells. 

As pointed out earlier, the revo uses a 5/8" mandrel which is a shopsmith 
standard. So if you need to use your 4 jaw chuck most people sell and you would 
only use on the revo, you would get the shopsmith adapter for say you nova 
chuck. Otherwise, you would use the 1-8 to adapter to go with the standard 
lathes available here an get the adapter that Bill pointed out to fit the revo.

How's that for a complete answer!

Tim

On Jul 28, 2019, at 1:57 AM, Richard Ellis  > 
wrote:

Ray

 I have measured the thread and it is definitely 3/8 x24 tpi unf

What exactly do you want to hold in such a small chuck, is it pen making stuff 
? If so I have some I don't use.

Richard 

On Sunday, July 28, 2019 at 4:51:51 AM UTC+1, Tim wrote:

Hey, my 200 is tricked out, I would miss it! I recall paying more than retail, 
but it came complete with a router, rust, and wrong parts.  No wonder he didn't 
use it much.

On Jul 27, 2019, at 7:37 PM, MWF mailto:mwfo...@earthlink.net> > wrote:

Roger,

You just haven't offered him a "King's Ransom" - he's holding out.

Offer him enough, and when his wife finds out - you'll have a deal!

To be honest, I don't think you (or I) would want a Model 200 bad enough to 
offer up a "King's Ransom"for one.

Heck, I bet if your offer got high enough, Tim Krause would ship you his!  But, 
you better make the offer in US Dollars.

Cheers.

Mac


  _  


-Original Message- 
From: Bawdsey64 
Sent: Jul 27, 2019 1:29 PM 
To: MWF , Legacy Group 
Subject: RE: REVO Help 

​Thanks Mac

However you are wrong, for this gentleman wishes to keep this wonderful piece 
of machinery because unlike his CNC machines it does not take up a lot of room!

And by the way, what are these Pounds you mention because they have now been re 
launched as Boris Dollars as he is so keen to suck up to Donald.

Please be aware that normal political service will be resumed but currently we 
don't know when.

Cheers

Roger


  _  


From: MWF

Received: 27/07/2019 17:12:59 +01:00

To: legacy-orna...@googlegroups.com <mailto:legacy-orna...@googlegroups.com> 

Roger,

 

EVERYTHING is "for sale"!  Including his Model 200!

You just haven't put enough "Pounds" in his paws!  LoL!

Economists call it "Supply and Demand".

 

Mac


  _  


-Original Message- 
From: Bawdsey64 
Sent: Jul 27, 2019 11:38 AM 
To: Ray Clements , Legacy Group 
Subject: RE: REVO Help 

Hi Ray

 

First of all I remember delivering your machine to you.  

Now if you send me a picture of the Headstock on your REVO I might be able to 
tell what NOVA Insert you need, since retiring I have done a bit of consultancy 
work for Teknatool (NOVA).

On the subject of the Model 200 I know where one resides in the UK and I would 
buy it if I could but he won't sell it.

Cheers

Roger 


  _  


​​

From: Ray Clements

Received: 27/07/2019 12:12:18 +01:00

To:

Thanks Bill – that’s just what I need.  Can someone  tell me what a 3/8- 24 
thread is?  Is that 3/8” diameter and 24 tpi?​

Ideally I’d like an insert for my Supernova Chuck but not found one with that 
small a diameter.  There is a firm that will cut a customised one I 

Re: REVO Help

[Tim Krause]

I thought we were educating another fella.  Don't mind me.

On Jul 28, 2019, 11:38 PM, at 11:38 PM, Richard Ellis  
wrote:
>Hi Tim
>*I think there is a mix up*. I have all the pen making equipment and as
>for 
>the large chuck  adapter, that was made by me when I had a metal work
>lathe
>I had no problems cutting threads ,welding or other things that were
>needed 
>to improve the LOM's
>I just can't see  myself rushing out to buy a 200  
>The larger chuck with all the different jaws came with a fitting to fit
>my 
>normal wood lathe , that I hardly use. I am not into bowl turning and I
>try 
>to make the Revo do all I need
>Now like Bill, I have increased the rail length (from the 900 ) it is a
>
>better tool.
>I do not know what the 900 will be like when fitted with the shorter
>Revo 
>rails and leadscrew probably a disaster???
>Regards
>Richard
>
>On Monday, July 29, 2019 at 6:12:12 AM UTC+1, aussiman wrote:
>>
>> Nice one master yoda as always you are the man Tim
>>
>>  
>>
>> Bill
>>
>>  
>>
>> *From:* legacy-orna...@googlegroups.com  <
>> legacy-orna...@googlegroups.com > *On Behalf Of *Tim
>Krause
>> *Sent:* Monday, 29 July 2019 2:28 PM
>> *To:* Legacy Ornamental Mills > >
>> *Subject:* Re: REVO Help
>>
>>  
>>
>> Hi Richard,
>>
>> This is really nerdy stuff, but here it goes. Legacy on the model 200
>came 
>> with the option of a pen mandrel that screwed into the spindle. Then
>pen 
>> mandrel was proprietary to the 200. So when they started offering the
>revo, 
>> they made a change to the spindle that would be able to take a
>standard to 
>> the USA drill chuck and that was used to hold a standard pen mandrel
>that 
>> every woodturning supplier sells. 
>>
>> As pointed out earlier, the revo uses a 5/8" mandrel which is a
>shopsmith 
>> standard. So if you need to use your 4 jaw chuck most people sell and
>you 
>> would only use on the revo, you would get the shopsmith adapter for
>say you 
>> nova chuck. Otherwise, you would use the 1-8 to adapter to go with
>the 
>> standard lathes available here an get the adapter that Bill pointed
>out to 
>> fit the revo.
>>
>> How's that for a complete answer!
>>
>> Tim
>>
>> On Jul 28, 2019, at 1:57 AM, Richard Ellis > > wrote:
>>
>> Ray
>>
>>  I have measured the thread and it is definitely 3/8 x24 tpi unf
>>
>> What exactly do you want to hold in such a small chuck, is it pen
>making 
>> stuff ? If so I have some I don't use.
>>
>> Richard 
>>
>> On Sunday, July 28, 2019 at 4:51:51 AM UTC+1, Tim wrote:
>>
>> Hey, my 200 is tricked out, I would miss it! I recall paying more
>than 
>> retail, but it came complete with a router, rust, and wrong parts. 
>No 
>> wonder he didn't use it much.
>>
>> On Jul 27, 2019, at 7:37 PM, MWF  wrote:
>>
>> Roger,
>>
>> You just haven't offered him a "King's Ransom" - he's holding out.
>>
>> Offer him enough, and when his wife finds out - you'll have a deal!
>>
>> To be honest, I don't think you (or I) would want a Model 200 bad
>enough 
>> to offer up a "King's Ransom"for one.
>>
>> Heck, I bet if your offer got high enough, Tim Krause would ship you
>his!  
>> But, you better make the offer in US Dollars.
>>
>> Cheers.
>>
>> Mac
>> --
>>
>> -Original Message- 
>> From: Bawdsey64 
>> Sent: Jul 27, 2019 1:29 PM 
>> To: MWF , Legacy Group 
>> Subject: RE: REVO Help 
>>
>> ​Thanks Mac
>>
>> However you are wrong, for this gentleman wishes to keep this
>wonderful 
>> piece of machinery because unlike his CNC machines it does not take
>up a 
>> lot of room!
>>
>> And by the way, what are these Pounds you mention because they have
>now 
>> been re launched as Boris Dollars as he is so keen to suck up to
>Donald.
>>
>> Please be aware that normal political service will be resumed but 
>> currently we don't know when.
>>
>> Cheers
>>
>> Roger
>> --
>>
>> *From:* MWF
>>
>> *Received:* 27/07/2019 17:12:59 +01:00
>>
>> *To:* legacy-orna...@googlegroups.com
>>
>> Roger,
>>
>>  
>>
>> EVERYTHING is "for sale"!  Including his Model 200!
>>
>> You just haven't put enough "Pounds" in his paws!  LoL!
>>
>> Economists call it &

Re: REVO Help

[Richard Ellis]

Hi Tim
*I think there is a mix up*. I have all the pen making equipment and as for 
the large chuck  adapter, that was made by me when I had a metal work lathe
I had no problems cutting threads ,welding or other things that were needed 
to improve the LOM's
I just can't see  myself rushing out to buy a 200  
The larger chuck with all the different jaws came with a fitting to fit my 
normal wood lathe , that I hardly use. I am not into bowl turning and I try 
to make the Revo do all I need
Now like Bill, I have increased the rail length (from the 900 ) it is a 
better tool.
I do not know what the 900 will be like when fitted with the shorter Revo 
rails and leadscrew probably a disaster???
Regards
Richard

On Monday, July 29, 2019 at 6:12:12 AM UTC+1, aussiman wrote:
>
> Nice one master yoda as always you are the man Tim
>
>  
>
> Bill
>
>  
>
> *From:* legacy-orna...@googlegroups.com  <
> legacy-orna...@googlegroups.com > *On Behalf Of *Tim Krause
> *Sent:* Monday, 29 July 2019 2:28 PM
> *To:* Legacy Ornamental Mills  >
> *Subject:* Re: REVO Help
>
>  
>
> Hi Richard,
>
> This is really nerdy stuff, but here it goes. Legacy on the model 200 came 
> with the option of a pen mandrel that screwed into the spindle. Then pen 
> mandrel was proprietary to the 200. So when they started offering the revo, 
> they made a change to the spindle that would be able to take a standard to 
> the USA drill chuck and that was used to hold a standard pen mandrel that 
> every woodturning supplier sells. 
>
> As pointed out earlier, the revo uses a 5/8" mandrel which is a shopsmith 
> standard. So if you need to use your 4 jaw chuck most people sell and you 
> would only use on the revo, you would get the shopsmith adapter for say you 
> nova chuck. Otherwise, you would use the 1-8 to adapter to go with the 
> standard lathes available here an get the adapter that Bill pointed out to 
> fit the revo.
>
> How's that for a complete answer!
>
> Tim
>
> On Jul 28, 2019, at 1:57 AM, Richard Ellis  > wrote:
>
> Ray
>
>  I have measured the thread and it is definitely 3/8 x24 tpi unf
>
> What exactly do you want to hold in such a small chuck, is it pen making 
> stuff ? If so I have some I don't use.
>
> Richard 
>
> On Sunday, July 28, 2019 at 4:51:51 AM UTC+1, Tim wrote:
>
> Hey, my 200 is tricked out, I would miss it! I recall paying more than 
> retail, but it came complete with a router, rust, and wrong parts.  No 
> wonder he didn't use it much.
>
> On Jul 27, 2019, at 7:37 PM, MWF  wrote:
>
> Roger,
>
> You just haven't offered him a "King's Ransom" - he's holding out.
>
> Offer him enough, and when his wife finds out - you'll have a deal!
>
> To be honest, I don't think you (or I) would want a Model 200 bad enough 
> to offer up a "King's Ransom"for one.
>
> Heck, I bet if your offer got high enough, Tim Krause would ship you his!  
> But, you better make the offer in US Dollars.
>
> Cheers.
>
> Mac
> --
>
> -Original Message- 
> From: Bawdsey64 
> Sent: Jul 27, 2019 1:29 PM 
> To: MWF , Legacy Group 
> Subject: RE: REVO Help 
>
> ​Thanks Mac
>
> However you are wrong, for this gentleman wishes to keep this wonderful 
> piece of machinery because unlike his CNC machines it does not take up a 
> lot of room!
>
> And by the way, what are these Pounds you mention because they have now 
> been re launched as Boris Dollars as he is so keen to suck up to Donald.
>
> Please be aware that normal political service will be resumed but 
> currently we don't know when.
>
> Cheers
>
> Roger
> --
>
> *From:* MWF
>
> *Received:* 27/07/2019 17:12:59 +01:00
>
> *To:* legacy-orna...@googlegroups.com
>
> Roger,
>
>  
>
> EVERYTHING is "for sale"!  Including his Model 200!
>
> You just haven't put enough "Pounds" in his paws!  LoL!
>
> Economists call it "Supply and Demand".
>
>  
>
> Mac
> --
>
> -Original Message- 
> From: Bawdsey64 
> Sent: Jul 27, 2019 11:38 AM 
> To: Ray Clements , Legacy Group 
> Subject: RE: REVO Help 
>
> Hi Ray
>
>  
>
> First of all I remember delivering your machine to you.  
>
> Now if you send me a picture of the Headstock on your REVO I might be able 
> to tell what NOVA Insert you need, since retiring I have done a bit of 
> consultancy work for Teknatool (NOVA).
>
> On the subject of the Model 200 I know where one resides in the UK and I 
> would buy it if I could but he won't sell it.
>
> Cheers
>
> Roger 
> --

Re: REVO Help

[Richard Ellis]

On Friday, July 26, 2019 at 6:15:11 PM UTC+1, Brafield Bodger wrote:
>
> OK - here we go.
>
> The REVO was supposed to have a 2MT morse taper - but for the life of me I 
> cannot find out where it is.  Anyone?
>
> Does anyone know what the thread is on the headstock - there is a nut 
> holding the Index Hub (female) to the geared section?
>
> If you do/dont know the size of the thread - do you know any chuck or 
> drill chuck that fits?
>
> Thanks.
>
>
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1c40a9e8-8034-4a33-9d6a-5e4f0fde4a24%40googlegroups.com.

RE: REVO Help

[bulkeley]

Nice one master yoda as always you are the man Tim

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Krause
Sent: Monday, 29 July 2019 2:28 PM
To: Legacy Ornamental Mills 
Subject: Re: REVO Help

 

Hi Richard,

This is really nerdy stuff, but here it goes. Legacy on the model 200 came with 
the option of a pen mandrel that screwed into the spindle. Then pen mandrel was 
proprietary to the 200. So when they started offering the revo, they made a 
change to the spindle that would be able to take a standard to the USA drill 
chuck and that was used to hold a standard pen mandrel that every woodturning 
supplier sells. 

As pointed out earlier, the revo uses a 5/8" mandrel which is a shopsmith 
standard. So if you need to use your 4 jaw chuck most people sell and you would 
only use on the revo, you would get the shopsmith adapter for say you nova 
chuck. Otherwise, you would use the 1-8 to adapter to go with the standard 
lathes available here an get the adapter that Bill pointed out to fit the revo.

How's that for a complete answer!

Tim

On Jul 28, 2019, at 1:57 AM, Richard Ellis mailto:rchrd.ell...@gmail.com> > wrote:

Ray

 I have measured the thread and it is definitely 3/8 x24 tpi unf

What exactly do you want to hold in such a small chuck, is it pen making stuff 
? If so I have some I don't use.

Richard 

On Sunday, July 28, 2019 at 4:51:51 AM UTC+1, Tim wrote:

Hey, my 200 is tricked out, I would miss it! I recall paying more than retail, 
but it came complete with a router, rust, and wrong parts.  No wonder he didn't 
use it much.

On Jul 27, 2019, at 7:37 PM, MWF  > wrote:

Roger,

You just haven't offered him a "King's Ransom" - he's holding out.

Offer him enough, and when his wife finds out - you'll have a deal!

To be honest, I don't think you (or I) would want a Model 200 bad enough to 
offer up a "King's Ransom"for one.

Heck, I bet if your offer got high enough, Tim Krause would ship you his!  But, 
you better make the offer in US Dollars.

Cheers.

Mac


  _  


-Original Message- 
From: Bawdsey64 
Sent: Jul 27, 2019 1:29 PM 
To: MWF , Legacy Group 
Subject: RE: REVO Help 

​Thanks Mac

However you are wrong, for this gentleman wishes to keep this wonderful piece 
of machinery because unlike his CNC machines it does not take up a lot of room!

And by the way, what are these Pounds you mention because they have now been re 
launched as Boris Dollars as he is so keen to suck up to Donald.

Please be aware that normal political service will be resumed but currently we 
don't know when.

Cheers

Roger


  _  


From: MWF

Received: 27/07/2019 17:12:59 +01:00

To: legacy-orna...@googlegroups.com  

Roger,

 

EVERYTHING is "for sale"!  Including his Model 200!

You just haven't put enough "Pounds" in his paws!  LoL!

Economists call it "Supply and Demand".

 

Mac


  _  


-Original Message- 
From: Bawdsey64 
Sent: Jul 27, 2019 11:38 AM 
To: Ray Clements , Legacy Group 
Subject: RE: REVO Help 

Hi Ray

 

First of all I remember delivering your machine to you.  

Now if you send me a picture of the Headstock on your REVO I might be able to 
tell what NOVA Insert you need, since retiring I have done a bit of consultancy 
work for Teknatool (NOVA).

On the subject of the Model 200 I know where one resides in the UK and I would 
buy it if I could but he won't sell it.

Cheers

Roger 


  _  


​​

From: Ray Clements

Received: 27/07/2019 12:12:18 +01:00

To:

Thanks Bill – that’s just what I need.  Can someone  tell me what a 3/8- 24 
thread is?  Is that 3/8” diameter and 24 tpi?​

Ideally I’d like an insert for my Supernova Chuck but not found one with that 
small a diameter.  There is a firm that will cut a customised one I found – now 
all I have to do is find them again ​

Ray​

From: legacy-orna...@googlegroups.com   
 > On Behalf Of 
bulk...@mmnet.com.au  
Sent: Saturday, July 27, 2019 2:28 AM
To: legacy-orna...@googlegroups.com  
Subject: RE: REVO Help​

The revo to my knowledge never had a morse taper. Only people modifying the 
mill would have. as for the thread on the headstock look at the attached pic 
legacy used to sell a chuck to fit the thread size is on the pic of their add 
from way back when​

Bill​


  _  


From: legacy-orna...@googlegroups.com   
 > On Behalf Of Brafield 
Bodger
Sent: Saturday, 27 July 2019 3:15 AM
To: Legacy Ornamental Mills  >
Subject: REVO Help​

OK - here we go.​

The REVO was supposed to have a 2MT morse taper - but for the life of me I 
cannot find out where it is.  Anyone?​

Does anyone know what the thread is on the headstock - there is a nut holding 
the Index Hub (female) to the geared section?​

If you do/dont know the size of the thread - do you know any chuck or drill 
chuck that fits?​

Thanks.​

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills&

Re: REVO Help

[Tim Krause]

Hi Richard,

This is really nerdy stuff, but here it goes. Legacy on the model 200 came with 
the option of a pen mandrel that screwed into the spindle. Then pen mandrel was 
proprietary to the 200. So when they started offering the revo, they made a 
change to the spindle that would be able to take a standard to the USA drill 
chuck and that was used to hold a standard pen mandrel that every woodturning 
supplier sells. 

As pointed out earlier, the revo uses a 5/8" mandrel which is a shopsmith 
standard. So if you need to use your 4 jaw chuck most people sell and you would 
only use on the revo, you would get the shopsmith adapter for say you nova 
chuck. Otherwise, you would use the 1-8 to adapter to go with the standard 
lathes available here an get the adapter that Bill pointed out to fit the revo.

How's that for a complete answer!

Tim

On Jul 28, 2019, 1:57 AM, at 1:57 AM, Richard Ellis  
wrote:
>Ray
> I have measured the thread and it is definitely 3/8 x24 tpi unf
>What exactly do you want to hold in such a small chuck, is it pen
>making 
>stuff ? If so I have some I don't use.
>Richard 
>
>On Sunday, July 28, 2019 at 4:51:51 AM UTC+1, Tim wrote:
>>
>> Hey, my 200 is tricked out, I would miss it! I recall paying more
>than 
>> retail, but it came complete with a router, rust, and wrong parts. 
>No 
>> wonder he didn't use it much.
>> On Jul 27, 2019, at 7:37 PM, MWF > 
>> wrote:
>>>
>>> Roger,
>>> You just haven't offered him a "King's Ransom" - he's holding out.
>>> Offer him enough, and when his wife finds out - you'll have a deal!
>>> To be honest, I don't think you (or I) would want a Model 200 bad
>enough 
>>> to offer up a "King's Ransom"for one.
>>> Heck, I bet if your offer got high enough, Tim Krause would ship you
>
>>> his!  But, you better make the offer in US Dollars.
>>> Cheers.
>>> Mac
>>> --
>>>
>>> -Original Message- 
>>> From: Bawdsey64 
>>> Sent: Jul 27, 2019 1:29 PM 
>>> To: MWF , Legacy Group 
>>> Subject: RE: REVO Help 
>>>
>>> ​Thanks Mac
>>>
>>> However you are wrong, for this gentleman wishes to keep this
>wonderful 
>>> piece of machinery because unlike his CNC machines it does not take
>up a 
>>> lot of room!
>>>
>>> And by the way, what are these Pounds you mention because they have
>now 
>>> been re launched as Boris Dollars as he is so keen to suck up to
>Donald.
>>>
>>> Please be aware that normal political service will be resumed but 
>>> currently we don't know when.
>>>
>>> Cheers
>>>
>>> Roger
>>> --
>>> From: MWF
>>> Received: 27/07/2019 17:12:59 +01:00
>>> To: legacy-orna...@googlegroups.com 
>>> Roger,
>>>
>>> EVERYTHING is "for sale"!  Including his Model 200!
>>> You just haven't put enough "Pounds" in his paws!  LoL!
>>> Economists call it "Supply and Demand".
>>>
>>> Mac
>>> --
>>> -Original Message- 
>>> From: Bawdsey64 
>>> Sent: Jul 27, 2019 11:38 AM 
>>> To: Ray Clements , Legacy Group 
>>> Subject: RE: REVO Help 
>>>
>>> Hi Ray
>>>
>>> First of all I remember delivering your machine to you.  
>>>
>>> Now if you send me a picture of the Headstock on your REVO I might
>be 
>>> able to tell what NOVA Insert you need, since retiring I have done a
>bit of 
>>> consultancy work for Teknatool (NOVA).
>>>
>>> On the subject of the Model 200 I know where one resides in the UK
>and I 
>>> would buy it if I could but he won't sell it.
>>>
>>> Cheers
>>>
>>> Roger 
>>> --
>>> ​​
>>> From: Ray Clements
>>> Received: 27/07/2019 12:12:18 +01:00
>>> To:
>>>
>>> Thanks Bill – that’s just what I need.  Can someone  tell me what a
>3/8- 
>>> 24 thread is?  Is that 3/8” diameter and 24 tpi?​
>>>
>>> Ideally I’d like an insert for my Supernova Chuck but not found one
>with 
>>> that small a diameter.  There is a firm that will cut a customised
>one I 
>>> found – now all I have to do is find them again ​
>>>
>>> Ray​
>>>
>>> From: legacy-orna...@googlegroups.com  <
>>> legacy-orna...@googlegroups.com > On Behalf Of 
>>> bulk...@mmnet.com.au 
&

RE: REVO Help

[Ray Clements]

Hi Richard

 

Yes – pen and the like – you are very kind

 

Ray

 

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Richard Ellis
Sent: Sunday, July 28, 2019 9:57 AM
To: Legacy Ornamental Mills 
Subject: Re: REVO Help

 

Ray

 I have measured the thread and it is definitely 3/8 x24 tpi unf

What exactly do you want to hold in such a small chuck, is it pen making stuff 
? If so I have some I don't use.

Richard 

.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/!%26!AAAuAAWidzIP7QpEnnD3kqJmMtQBAMO2jhD3dRHOtM0AqgC7tuYAAA4AABCEgcnD1w/mRaKRTm/i1wnNAQA%3D%40sky.com.

Re: REVO Help

[Richard Ellis]

Ray
 I have measured the thread and it is definitely 3/8 x24 tpi unf
What exactly do you want to hold in such a small chuck, is it pen making 
stuff ? If so I have some I don't use.
Richard 

On Sunday, July 28, 2019 at 4:51:51 AM UTC+1, Tim wrote:
>
> Hey, my 200 is tricked out, I would miss it! I recall paying more than 
> retail, but it came complete with a router, rust, and wrong parts.  No 
> wonder he didn't use it much.
> On Jul 27, 2019, at 7:37 PM, MWF > 
> wrote:
>>
>> Roger,
>> You just haven't offered him a "King's Ransom" - he's holding out.
>> Offer him enough, and when his wife finds out - you'll have a deal!
>> To be honest, I don't think you (or I) would want a Model 200 bad enough 
>> to offer up a "King's Ransom"for one.
>> Heck, I bet if your offer got high enough, Tim Krause would ship you 
>> his!  But, you better make the offer in US Dollars.
>> Cheers.
>> Mac
>> --
>>
>> -----Original Message- 
>> From: Bawdsey64 
>> Sent: Jul 27, 2019 1:29 PM 
>> To: MWF , Legacy Group 
>> Subject: RE: REVO Help 
>>
>> ​Thanks Mac
>>
>> However you are wrong, for this gentleman wishes to keep this wonderful 
>> piece of machinery because unlike his CNC machines it does not take up a 
>> lot of room!
>>
>> And by the way, what are these Pounds you mention because they have now 
>> been re launched as Boris Dollars as he is so keen to suck up to Donald.
>>
>> Please be aware that normal political service will be resumed but 
>> currently we don't know when.
>>
>> Cheers
>>
>> Roger
>> --
>> From: MWF
>> Received: 27/07/2019 17:12:59 +01:00
>> To: legacy-orna...@googlegroups.com 
>> Roger,
>>
>> EVERYTHING is "for sale"!  Including his Model 200!
>> You just haven't put enough "Pounds" in his paws!  LoL!
>> Economists call it "Supply and Demand".
>>
>> Mac
>> --
>> -Original Message- 
>> From: Bawdsey64 
>> Sent: Jul 27, 2019 11:38 AM 
>> To: Ray Clements , Legacy Group 
>> Subject: RE: REVO Help 
>>
>> Hi Ray
>>
>> First of all I remember delivering your machine to you.  
>>
>> Now if you send me a picture of the Headstock on your REVO I might be 
>> able to tell what NOVA Insert you need, since retiring I have done a bit of 
>> consultancy work for Teknatool (NOVA).
>>
>> On the subject of the Model 200 I know where one resides in the UK and I 
>> would buy it if I could but he won't sell it.
>>
>> Cheers
>>
>> Roger 
>> --
>> ​​
>> From: Ray Clements
>> Received: 27/07/2019 12:12:18 +01:00
>> To:
>>
>> Thanks Bill – that’s just what I need.  Can someone  tell me what a 3/8- 
>> 24 thread is?  Is that 3/8” diameter and 24 tpi?​
>>
>> Ideally I’d like an insert for my Supernova Chuck but not found one with 
>> that small a diameter.  There is a firm that will cut a customised one I 
>> found – now all I have to do is find them again ​
>>
>> Ray​
>>
>> From: legacy-orna...@googlegroups.com  <
>> legacy-orna...@googlegroups.com > On Behalf Of 
>> bulk...@mmnet.com.au 
>> Sent: Saturday, July 27, 2019 2:28 AM
>> To: legacy-orna...@googlegroups.com 
>> Subject: RE: REVO Help​
>>
>> The revo to my knowledge never had a morse taper. Only people modifying 
>> the mill would have. as for the thread on the headstock look at the 
>> attached pic legacy used to sell a chuck to fit the thread size is on the 
>> pic of their add from way back when​
>>
>> Bill​
>> --
>>
>> From: legacy-orna...@googlegroups.com  <
>> legacy-ornamental-mills@googlegroups.com > On Behalf Of 
>> Brafield 
>> Bodger
>> Sent: Saturday, 27 July 2019 3:15 AM
>> To: Legacy Ornamental Mills > >
>> Subject: REVO Help​
>>
>> OK - here we go.​
>>
>> The REVO was supposed to have a 2MT morse taper - but for the life of me 
>> I cannot find out where it is.  Anyone?​
>>
>> Does anyone know what the thread is on the headstock - there is a nut 
>> holding the Index Hub (female) to the geared section?​
>>
>> If you do/dont know the size of the thread - do you know any chuck or 
>> drill chuck that fits?​
>>
>> Thanks.​
>>
>>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/baadb1ac-5b98-4c3d-b9ce-9332c59ca1d1%40googlegroups.com.

RE: REVO Help

[Tim Krause]

Hey, my 200 is tricked out, I would miss it! I recall paying more than retail, 
but it came complete with a router, rust, and wrong parts.  No wonder he didn't 
use it much.

On Jul 27, 2019, 7:37 PM, at 7:37 PM, MWF  wrote:
>Roger,
>
>You just haven't offered him a "King's Ransom" - he's holding out.
>
>Offer him enough, and when his wife finds out - you'll have a deal!
>
>To be honest, I don't think you (or I) would want a Model 200 bad
>enough to offer up a "King's Ransom"for one.
>
>Heck, I bet if your offer got high enough, Tim Krause would ship you
>his!  But, you better make the offer in US Dollars.
>
>Cheers.
>
>Mac
>_
>
>-Original Message- 
>From: Bawdsey64 
>Sent: Jul 27, 2019 1:29 PM 
>To: MWF , Legacy Group 
>Subject: RE: REVO Help 
>
>​Thanks Mac
>
>However you are wrong, for this gentleman wishes to keep this wonderful
>piece of machinery because unlike his CNC machines it does not take up
>a lot of room!
>
>And by the way, what are these Pounds you mention because they have now
>been re launched as Boris Dollars as he is so keen to suck up to
>Donald.
>
>Please be aware that normal political service will be resumed but
>currently we don't know when.
>
>Cheers
>
>Roger
>
>_
>
>From: MWF
>
>Received: 27/07/2019 17:12:59 +01:00
>
>To: legacy-ornamental-mills@googlegroups.com
>
>Roger,
>
>
>EVERYTHING is "for sale"!  Including his Model 200!
>
>You just haven't put enough "Pounds" in his paws!  LoL!
>
>Economists call it "Supply and Demand".
>
>
>Mac
>_
>
>-Original Message- 
>From: Bawdsey64 
>Sent: Jul 27, 2019 11:38 AM 
>To: Ray Clements , Legacy Group 
>Subject: RE: REVO Help 
>
>Hi Ray
>
>
>First of all I remember delivering your machine to you.  
>
>Now if you send me a picture of the Headstock on your REVO I might be
>able to tell what NOVA Insert you need, since retiring I have done a
>bit of consultancy work for Teknatool (NOVA).
>
>On the subject of the Model 200 I know where one resides in the UK and
>I would buy it if I could but he won't sell it.
>
>Cheers
>
>Roger 
>
>_
>​​
>
>From: Ray Clements
>
>Received: 27/07/2019 12:12:18 +01:00
>
>To:
>
>Thanks Bill – that’s just what I need.  Can someone  tell me what a
>3/8- 24 thread is?  Is that 3/8” diameter and 24 tpi?​
>
>Ideally I’d like an insert for my Supernova Chuck but not found one
>with that small a diameter.  There is a firm that will cut a customised
>one I found – now all I have to do is find them again ​
>
>Ray​
>
>From: legacy-ornamental-mills@googlegroups.com
> On Behalf Of
>bulke...@mmnet.com.au
>Sent: Saturday, July 27, 2019 2:28 AM
>To: legacy-ornamental-mills@googlegroups.com
>Subject: RE: REVO Help​
>
>The revo to my knowledge never had a morse taper. Only people modifying
>the mill would have. as for the thread on the headstock look at the
>attached pic legacy used to sell a chuck to fit the thread size is on
>the pic of their add from way back when​
>
>Bill​
>
>_
>
>From: legacy-ornamental-mills@googlegroups.com
> On Behalf Of Brafield Bodger
>Sent: Saturday, 27 July 2019 3:15 AM
>To: Legacy Ornamental Mills 
>Subject: REVO Help​
>
>OK - here we go.​
>
>The REVO was supposed to have a 2MT morse taper - but for the life of
>me I cannot find out where it is.  Anyone?​
>
>Does anyone know what the thread is on the headstock - there is a nut
>holding the Index Hub (female) to the geared section?​
>
>If you do/dont know the size of the thread - do you know any chuck or
>drill chuck that fits?​
>
>Thanks.​
>
>-- 
>You received this message because you are subscribed to the Google
>Groups "Legacy Ornamental Mills" group.
>To unsubscribe from this group and stop receiving emails from it, send
>an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>To view this discussion on the web visit
>https://groups.google.com/d/msgid/legacy-ornamental-mills/388821048.8555.1564281418833%40wamui-agami.atl.sa.earthlink.net.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/9c298acc-012c-4034-b530-e2dd319e0e29%40comcast.net.

RE: REVO Help

[MWF]

Roger,You just haven't offered him a "King's Ransom" - he's holding out.Offer him enough, and when his wife finds out - you'll have a deal!To be honest, I don't think you (or I) would want a Model 200 bad enough to offer up a "King's Ransom"for one.Heck, I bet if your offer got high enough, Tim Krause would ship you his!  But, you better make the offer in US Dollars.Cheers.Mac-Original Message-
From: Bawdsey64 
Sent: Jul 27, 2019 1:29 PM
To: MWF , Legacy Group 
Subject: RE: REVO Help

​Thanks MacHowever you are wrong, for this gentleman wishes to keep this wonderful piece of machinery because unlike his CNC machines it does not take up a lot of room!And by the way, what are these Pounds you mention because they have now been re launched as Boris Dollars as he is so keen to suck up to Donald.Please be aware that normal political service will be resumed but currently we don't know when.CheersRogerFrom: MWFReceived: 27/07/2019 17:12:59 +01:00To: legacy-ornamental-mills@googlegroups.comRoger,EVERYTHING is "for sale"!  Including his Model 200!You just haven't put enough "Pounds" in his paws!  LoL!Economists call it "Supply and Demand".Mac-Original Message- From: Bawdsey64 Sent: Jul 27, 2019 11:38 AM To: Ray Clements , Legacy Group Subject: RE: REVO Help Hi RayFirst of all I remember delivering your machine to you.  Now if you send me a picture of the Headstock on your REVO I might be able to tell what NOVA Insert you need, since retiring I have done a bit of consultancy work for Teknatool (NOVA).On the subject of the Model 200 I know where one resides in the UK and I would buy it if I could but he won't sell it.CheersRoger ​​From: Ray ClementsReceived: 27/07/2019 12:12:18 +01:00To:Thanks Bill – that’s just what I need.  Can someone  tell me what a 3/8- 24 thread is?  Is that 3/8” diameter and 24 tpi?​Ideally I’d like an insert for my Supernova Chuck but not found one with that small a diameter.  There is a firm that will cut a customised one I found – now all I have to do is find them again ​Ray​From: legacy-ornamental-mills@googlegroups.com  On Behalf Of bulke...@mmnet.com.auSent: Saturday, July 27, 2019 2:28 AMTo: legacy-ornamental-mills@googlegroups.comSubject: RE: REVO Help​The revo to my knowledge never had a morse taper. Only people modifying the mill would have. as for the thread on the headstock look at the attached pic legacy used to sell a chuck to fit the thread size is on the pic of their add from way back when​Bill​From: legacy-ornamental-mills@googlegroups.com <legacy-ornamental-mills@googlegroups.com> On Behalf Of Brafield BodgerSent: Saturday, 27 July 2019 3:15 AMTo: Legacy Ornamental Mills <legacy-ornamental-mills@googlegroups.com>Subject: REVO Help​OK - here we go.​The REVO was supposed to have a 2MT morse taper - but for the life of me I cannot find out where it is.  Anyone?​Does anyone know what the thread is on the headstock - there is a nut holding the Index Hub (female) to the geared section?​If you do/dont know the size of the thread - do you know any chuck or drill chuck that fits?​Thanks.​



-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/388821048.8555.1564281418833%40wamui-agami.atl.sa.earthlink.net.

RE: REVO Help

[Tim Krause]

For a lathe chuck, you would use the shopsmith adapter for your chuck like bill 
said.

On Jul 27, 2019, 3:39 PM, at 3:39 PM, bulke...@mmnet.com.au wrote:
>To be clear here, the Jacobs chuck screws on to the revo thread but the
>lathe chucks don’t, they use an adaptor and just slides on the revos
>headstock shaft. And is held in place with grub screws
>
> 
>
>Bill
>
> 
>
>From: legacy-ornamental-mills@googlegroups.com
> On Behalf Of Brafield Bodger
>Sent: Sunday, 28 July 2019 7:56 AM
>To: Legacy Ornamental Mills 
>Subject: Re: REVO Help
>
> 
>
>That would be ideal.  Is the female thread the same as the REVO?
>
>-- 
>You received this message because you are subscribed to the Google
>Groups "Legacy Ornamental Mills" group.
>To unsubscribe from this group and stop receiving emails from it, send
>an email to legacy-ornamental-mills+unsubscr...@googlegroups.com
><mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
>To view this discussion on the web visit
>https://groups.google.com/d/msgid/legacy-ornamental-mills/e8f1bb23-943f-4a1c-817c-ece5f92389e5%40googlegroups.com
><https://groups.google.com/d/msgid/legacy-ornamental-mills/e8f1bb23-943f-4a1c-817c-ece5f92389e5%40googlegroups.com?utm_medium=email_source=footer>
>.
>
>
>
>---
>This email has been checked for viruses by Avast antivirus software.
>https://www.avast.com/antivirus
>
>-- 
>You received this message because you are subscribed to the Google
>Groups "Legacy Ornamental Mills" group.
>To unsubscribe from this group and stop receiving emails from it, send
>an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>To view this discussion on the web visit
>https://groups.google.com/d/msgid/legacy-ornamental-mills/001601d544cc%2410a03690%2431e0a3b0%24%40mmnet.com.au.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/8d216233-a590-4319-b858-10a30e1eb573%40comcast.net.

RE: REVO Help

[Ray Clements]

Yes – I saw it – thanks

 

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Sunday, July 28, 2019 12:43 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: REVO Help

 

Did anyone see my email this morning or didn't it come through?

.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/!%26!AAAuAAWidzIP7QpEnnD3kqJmMtQBAMO2jhD3dRHOtM0AqgC7tuYAAA4AABCCAgJ%2BvI54QqBGq88PYvkFAQA%3D%40sky.com.

Re: REVO Help

[Tim Ziegler]

Did anyone see my email this morning or didn't it come through?

On Sat, Jul 27, 2019, 5:38 PM  wrote:

> To be clear here, the Jacobs chuck screws on to the revo thread but the
> lathe chucks don’t, they use an adaptor and just slides on the revos
> headstock shaft. And is held in place with grub screws
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Brafield Bodger
> *Sent:* Sunday, 28 July 2019 7:56 AM
> *To:* Legacy Ornamental Mills 
> *Subject:* Re: REVO Help
>
>
>
> That would be ideal.  Is the female thread the same as the REVO?
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/e8f1bb23-943f-4a1c-817c-ece5f92389e5%40googlegroups.com
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/e8f1bb23-943f-4a1c-817c-ece5f92389e5%40googlegroups.com?utm_medium=email_source=footer>
> .
>
>
> <https://www.avast.com/sig-email?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
>  Virus-free.
> www.avast.com
> <https://www.avast.com/sig-email?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
> <#m_2568128782746871357_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/001601d544cc%2410a03690%2431e0a3b0%24%40mmnet.com.au
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/001601d544cc%2410a03690%2431e0a3b0%24%40mmnet.com.au?utm_medium=email_source=footer>
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEM86UBz0S6QMPeW%3D%3DKLZtNm%2BCoidQbP1HKtPOe3ZN1YQ%40mail.gmail.com.

Re: REVO Help

[Brafield Bodger]

That would be ideal.  Is the female thread the same as the REVO?

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/e8f1bb23-943f-4a1c-817c-ece5f92389e5%40googlegroups.com.

Re: REVO Help

[Brafield Bodger]

That would be ideal.  You can get practically everything you need with a 
1*8 thread. Is the shopsmith the same thread as the REVO?



On Saturday, 27 July 2019 14:01:24 UTC+1, aussiman wrote:
>
> I think this is the one Tim is referring too  
> https://www.pennstateind.com/store/L5818.html
>
>  
>
> Bill
>
>  
>
> *From:* legacy-orna...@googlegroups.com  <
> legacy-orna...@googlegroups.com > *On Behalf Of *Tim Krause
> *Sent:* Saturday, 27 July 2019 10:35 PM
> *To:* legacy-orna...@googlegroups.com 
> *Subject:* Re: REVO Help
>
>  
>
> Penn state industries has what you need.  It's a shop Smith adapter that 
> you are looking for.  It fits over the 5/8" shaft and it has the 1-8 
> threads that fit most chucks.
>
> On Jul 27, 2019, at 4:21 AM, Tim Ziegler > 
> wrote:
>
> Hey good morning Ray,
>
>  
>
> Have you checked with Legacy them selves?
>
> I just bought my LOM 1200 this winter from a private party, and was able 
> to purchase several things. Gears, index plates,
>
> T nuts, thread adapters etc...direct from Legacy.  Was not super fast as 
> some was still being made as the order come in.
>
> Of course I am not sure exactly what you need but sure worth checking out 
> right guys?
>
>
> Kind Regards,
>
>  
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>  
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>  
>
>  
>
> On Sat, Jul 27, 2019 at 6:12 AM Ray Clements > 
> wrote:
>
> Thanks Bill – that’s just what I need.  Can someone  tell me what a 3/8- 
> 24 thread is?  Is that 3/8” diameter and 24 tpi?
>
>  
>
> Ideally I’d like an insert for my Supernova Chuck but not found one with 
> that small a diameter.  There is a firm that will cut a customised one I 
> found – now all I have to do is find them again 
>
>  
>
>  
>
> Ray
>
>  
>
> *From:* legacy-orna...@googlegroups.com  <
> legacy-orna...@googlegroups.com > *On Behalf Of *
> bulk...@mmnet.com.au 
> *Sent:* Saturday, July 27, 2019 2:28 AM
> *To:* legacy-orna...@googlegroups.com 
> *Subject:* RE: REVO Help
>
>  
>
> The revo to my knowledge never had a morse taper. Only people modifying 
> the mill would have. as for the thread on the headstock look at the 
> attached pic legacy used to sell a chuck to fit the thread size is on the 
> pic of their add from way back when
>
>  
>
> Bill
>
>  
>
>  
>
>  
>
> *From:* legacy-orna...@googlegroups.com  <
> legacy-orna...@googlegroups.com > *On Behalf Of *Brafield 
> Bodger
> *Sent:* Saturday, 27 July 2019 3:15 AM
> *To:* Legacy Ornamental Mills  >
> *Subject:* REVO Help
>
>  
>
> OK - here we go.
>
>  
>
> The REVO was supposed to have a 2MT morse taper - but for the life of me I 
> cannot find out where it is.  Anyone?
>
>  
>
> Does anyone know what the thread is on the headstock - there is a nut 
> holding the Index Hub (female) to the geared section?
>
>  
>
> If you do/dont know the size of the thread - do you know any chuck or 
> drill chuck that fits?
>
>  
>
> Thanks.
>
>  
>
>  
>
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com 
> .
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/legacy-ornamental-mills/a5c635b2-ad6f-4450-893a-172e3adb88c2%40googlegroups.com
>  
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/a5c635b2-ad6f-4450-893a-172e3adb88c2%40googlegroups.com?utm_medium=email_source=footer>
> .
>
>  
>
> [image: 
> https://ipmcdn.avast.com/images/icons/icon-envelope-tick-round-orange-animated-no-repeat-v1.gif]
>  
> <https://www.avast.com/sig-email?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
>
> Virus-free. www.avast.com 
> <https://www.avast.com/sig-email?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
>  
>
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com 
> .
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/legacy-ornamental-mills/000701d5441a%2490370120%24b0a50360%24%40mmnet.com.au
>  
> <https://groups.google

RE: REVO Help

[Bawdsey64]

Thanks Mac
However you are wrong, for this gentleman wishes to keep this wonderful piece 
of machinery because unlike his CNC machines it does not take up a lot of room!
And by the way, what are these Pounds you mention because they have now been re 
launched as Boris Dollars as he is so keen to suck up to Donald.
Please be aware that normal political service will be resumed but currently we 
don't know when.
Cheers
Roger  






From: MWF
Received: 27/07/2019 17:12:59 +01:00
To: legacy-ornamental-mills@googlegroups.com
Roger,

EVERYTHING is "for sale"!  Including his Model 200!

You just haven't put enough "Pounds" in his paws!  LoL!
Economists call it "Supply and Demand".


Mac

-Original Message-
From: Bawdsey64 
Sent: Jul 27, 2019 11:38 AM
To: Ray Clements , Legacy Group 
Subject: RE: REVO Help



Hi Ray
First of all I remember delivering your machine to you.  
Now if you send me a picture of the Headstock on your REVO I might be able to 
tell what NOVA Insert you need, since retiring I have done a bit of consultancy 
work for Teknatool (NOVA).
On the subject of the Model 200 I know where one resides in the UK and I would 
buy it if I could but he won't sell it.
Cheers
Roger


From: Ray Clements
Received: 27/07/2019 12:12:18 +01:00
To:
Thanks Bill – that’s just what I need.  Can someone  tell me what a 3/8- 24 
thread is?  Is that 3/8” diameter and 24 tpi?
Ideally I’d like an insert for my Supernova Chuck but not found one with that 
small a diameter.  There is a firm that will cut a customised one I found – now 
all I have to do is find them again 
Ray
From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of bulke...@mmnet.com.au
Sent: Saturday, July 27, 2019 2:28 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: REVO Help
The revo to my knowledge never had a morse taper. Only people modifying the 
mill would have. as for the thread on the headstock look at the attached pic 
legacy used to sell a chuck to fit the thread size is on the pic of their add 
from way back when
Bill

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] 
mailto:legacy-ornamental-mills@googlegroups.com]> On Behalf Of Brafield Bodger
Sent: Saturday, 27 July 2019 3:15 AM
To: Legacy Ornamental Mills mailto:legacy-ornamental-mills@googlegroups.com]>
Subject: REVO Help
OK - here we go.
The REVO was supposed to have a 2MT morse taper - but for the life of me I 
cannot find out where it is.  Anyone?
Does anyone know what the thread is on the headstock - there is a nut holding 
the Index Hub (female) to the geared section?
If you do/dont know the size of the thread - do you know any chuck or drill 
chuck that fits?
Thanks.
--
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
[mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com].
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/432153822.2457.1564243980014%40wamui-agami.atl.sa.earthlink.net
 
[https://groups.google.com/d/msgid/legacy-ornamental-mills/432153822.2457.1564243980014%40wamui-agami.atl.sa.earthlink.net?utm_medium=emailutm_source=footer].

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/07e67c2c-3a30-4849-a3cd-341baaaf993f%40mail.dll.

RE: REVO Help

[MWF]

Roger,EVERYTHING is "for sale"!  Including his Model 200!You just haven't put enough "Pounds" in his paws!  LoL!Economists call it "Supply and Demand".Mac-Original Message-
From: Bawdsey64 
Sent: Jul 27, 2019 11:38 AM
To: Ray Clements , Legacy Group 
Subject: RE: REVO Help

​Hi RayFirst of all I remember delivering your machine to you.  Now if you send me a picture of the Headstock on your REVO I might be able to tell what NOVA Insert you need, since retiring I have done a bit of consultancy work for Teknatool (NOVA).On the subject of the Model 200 I know where one resides in the UK and I would buy it if I could but he won't sell it.CheersRoger From: Ray ClementsReceived: 27/07/2019 12:12:18 +01:00To:Thanks Bill – that’s just what I need.  Can someone  tell me what a 3/8- 24 thread is?  Is that 3/8” diameter and 24 tpi?Ideally I’d like an insert for my Supernova Chuck but not found one with that small a diameter.  There is a firm that will cut a customised one I found – now all I have to do is find them again RayFrom: legacy-ornamental-mills@googlegroups.com  On Behalf Of bulke...@mmnet.com.auSent: Saturday, July 27, 2019 2:28 AMTo: legacy-ornamental-mills@googlegroups.comSubject: RE: REVO HelpThe revo to my knowledge never had a morse taper. Only people modifying the mill would have. as for the thread on the headstock look at the attached pic legacy used to sell a chuck to fit the thread size is on the pic of their add from way back whenBillFrom: legacy-ornamental-mills@googlegroups.com <legacy-ornamental-mills@googlegroups.com> On Behalf Of Brafield BodgerSent: Saturday, 27 July 2019 3:15 AMTo: Legacy Ornamental Mills <legacy-ornamental-mills@googlegroups.com>Subject: REVO HelpOK - here we go.The REVO was supposed to have a 2MT morse taper - but for the life of me I cannot find out where it is.  Anyone?Does anyone know what the thread is on the headstock - there is a nut holding the Index Hub (female) to the geared section?If you do/dont know the size of the thread - do you know any chuck or drill chuck that fits?Thanks.



-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/432153822.2457.1564243980014%40wamui-agami.atl.sa.earthlink.net.

RE: REVO Help

[Bawdsey64]

Hi Ray
First of all I remember delivering your machine to you.  
Now if you send me a picture of the Headstock on your REVO I might be able to 
tell what NOVA Insert you need, since retiring I have done a bit of consultancy 
work for Teknatool (NOVA).
On the subject of the Model 200 I know where one resides in the UK and I would 
buy it if I could but he won't sell it.
Cheers
Roger





From: Ray Clements
Received: 27/07/2019 12:12:18 +01:00
To:
Thanks Bill – that’s just what I need.  Can someone  tell me what a 3/8- 24 
thread is?  Is that 3/8” diameter and 24 tpi?
 
Ideally I’d like an insert for my Supernova Chuck but not found one with that 
small a diameter.  There is a firm that will cut a customised one I found – now 
all I have to do is find them again 
 
 
Ray
 
From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of bulke...@mmnet.com.au
Sent: Saturday, July 27, 2019 2:28 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: REVO Help
 
The revo to my knowledge never had a morse taper. Only people modifying the 
mill would have. as for the thread on the headstock look at the attached pic 
legacy used to sell a chuck to fit the thread size is on the pic of their add 
from way back when
 
Bill
 
 
 
From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] 
mailto:legacy-ornamental-mills@googlegroups.com]> On Behalf Of Brafield Bodger
Sent: Saturday, 27 July 2019 3:15 AM
To: Legacy Ornamental Mills mailto:legacy-ornamental-mills@googlegroups.com]>
Subject: REVO Help
 
OK - here we go.
 
The REVO was supposed to have a 2MT morse taper - but for the life of me I 
cannot find out where it is.  Anyone?
 
Does anyone know what the thread is on the headstock - there is a nut holding 
the Index Hub (female) to the geared section?
 
If you do/dont know the size of the thread - do you know any chuck or drill 
chuck that fits?
 
Thanks.
 
 
--
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
[mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com].
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/a5c635b2-ad6f-4450-893a-172e3adb88c2%40googlegroups.com
 
[https://groups.google.com/d/msgid/legacy-ornamental-mills/a5c635b2-ad6f-4450-893a-172e3adb88c2%40googlegroups.com?utm_medium=emailutm_source=footer].
 
[https://www.avast.com/sig-email?utm_medium=emailutm_source=linkutm_campaign=sig-emailutm_content=emailclient]
Virus-free. www.avast.com 
[https://www.avast.com/sig-email?utm_medium=emailutm_source=linkutm_campaign=sig-emailutm_content=emailclient]
--
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
[mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com].
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000701d5441a%2490370120%24b0a50360%24%40mmnet.com.au
 
[https://groups.google.com/d/msgid/legacy-ornamental-mills/000701d5441a%2490370120%24b0a50360%24%40mmnet.com.au?utm_medium=emailutm_source=footer].
--
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
[mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com].
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/!%26!AAAuAAWidzIP7QpEnnD3kqJmMtQBAMO2jhD3dRHOtM0AqgC7tuYAAA4AABCxm6lhq%2BrvTb97/CvE3pxqAQA%3D%40sky.com
 
[https://groups.google.com/d/msgid/legacy-ornamental-mills/!%26!AAAuAAWidzIP7QpEnnD3kqJmMtQBAMO2jhD3dRHOtM0AqgC7tuYAAA4AABCxm6lhq%2BrvTb97/CvE3pxqAQA%3D%40sky.com?utm_medium=emailutm_source=footer].

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/8fc94f82-8763-4422-96c5-a96dc047b917%40mail.dll.

RE: REVO Help

[Tim Krause]

That's the one.  5/8" smooth bore to 1-8 threads.

On Jul 27, 2019, 6:01 AM, at 6:01 AM, bulke...@mmnet.com.au wrote:
>I think this is the one Tim is referring too 
>https://www.pennstateind.com/store/L5818.html
>
> 
>
>Bill
>
> 
>
>From: legacy-ornamental-mills@googlegroups.com
> On Behalf Of Tim Krause
>Sent: Saturday, 27 July 2019 10:35 PM
>To: legacy-ornamental-mills@googlegroups.com
>Subject: Re: REVO Help
>
> 
>
>Penn state industries has what you need.  It's a shop Smith adapter
>that you are looking for.  It fits over the 5/8" shaft and it has the
>1-8 threads that fit most chucks.
>
>On Jul 27, 2019, at 4:21 AM, Tim Ziegler <mailto:timjzieg...@gmail.com> > wrote:
>
>Hey good morning Ray,
>
> 
>
>Have you checked with Legacy them selves?
>
>I just bought my LOM 1200 this winter from a private party, and was
>able to purchase several things. Gears, index plates,
>
>T nuts, thread adapters etc...direct from Legacy.  Was not super fast
>as some was still being made as the order come in.
>
>Of course I am not sure exactly what you need but sure worth checking
>out right guys?
>
>
>
>
>Kind Regards,
>
> 
>
>Timothy J. Ziegler
>
>Ziegler WoodWork & Specialty
>
>14171 160th Ave.
>
>Foreston MN 56330
>
> 
>
>320-294-5798 shop
>
>320-630-2243 cell
>
> 
>
> 
>
>On Sat, Jul 27, 2019 at 6:12 AM Ray Clements <mailto:rayu...@sky.com> > wrote:
>
>Thanks Bill – that’s just what I need.  Can someone  tell me what a
>3/8- 24 thread is?  Is that 3/8” diameter and 24 tpi?
>
> 
>
>Ideally I’d like an insert for my Supernova Chuck but not found one
>with that small a diameter.  There is a firm that will cut a customised
>one I found – now all I have to do is find them again 
>
> 
>
> 
>
>Ray
>
> 
>
>From: legacy-ornamental-mills@googlegroups.com
><mailto:legacy-ornamental-mills@googlegroups.com> 
><mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of
>bulke...@mmnet.com.au <mailto:bulke...@mmnet.com.au> 
>Sent: Saturday, July 27, 2019 2:28 AM
>To: legacy-ornamental-mills@googlegroups.com
><mailto:legacy-ornamental-mills@googlegroups.com> 
>Subject: RE: REVO Help
>
> 
>
>The revo to my knowledge never had a morse taper. Only people modifying
>the mill would have. as for the thread on the headstock look at the
>attached pic legacy used to sell a chuck to fit the thread size is on
>the pic of their add from way back when
>
> 
>
>Bill
>
> 
>
> 
>
> 
>
>From: legacy-ornamental-mills@googlegroups.com
><mailto:legacy-ornamental-mills@googlegroups.com> 
><mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of
>Brafield Bodger
>Sent: Saturday, 27 July 2019 3:15 AM
>To: Legacy Ornamental Mills <mailto:legacy-ornamental-mills@googlegroups.com> >
>Subject: REVO Help
>
> 
>
>OK - here we go.
>
> 
>
>The REVO was supposed to have a 2MT morse taper - but for the life of
>me I cannot find out where it is.  Anyone?
>
> 
>
>Does anyone know what the thread is on the headstock - there is a nut
>holding the Index Hub (female) to the geared section?
>
> 
>
>If you do/dont know the size of the thread - do you know any chuck or
>drill chuck that fits?
>
> 
>
>Thanks.
>
> 
>
> 
>
>-- 
>You received this message because you are subscribed to the Google
>Groups "Legacy Ornamental Mills" group.
>To unsubscribe from this group and stop receiving emails from it, send
>an email to legacy-ornamental-mills+unsubscr...@googlegroups.com
><mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
>To view this discussion on the web visit
>https://groups.google.com/d/msgid/legacy-ornamental-mills/a5c635b2-ad6f-4450-893a-172e3adb88c2%40googlegroups.com
><https://groups.google.com/d/msgid/legacy-ornamental-mills/a5c635b2-ad6f-4450-893a-172e3adb88c2%40googlegroups.com?utm_medium=email_source=footer>
>.
>
> 
>
>
><https://www.avast.com/sig-email?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
>
>
>Virus-free. 
><https://www.avast.com/sig-email?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
>www.avast.com 
>
>-- 
>You received this message because you are subscribed to the Google
>Groups "Legacy Ornamental Mills" group.
>To unsubscribe from this group and stop receiving emails from it, send
>an email to legacy-ornamental-mills+unsubscr...@googlegroups.com
><mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
>To view this discussio

Re: REVO Help

[Tim Ziegler]

Another great resource for turning supplies is "Craft Supplies USA" aka the
"The WoodTurners Catolog"
The have very top notch supplies and are very prompt in getting what you
need.
Also have a good customer service team. Check them out while your at too.
www.woodturnerscatalog.com
1-800-551-8876
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Sat, Jul 27, 2019 at 8:01 AM  wrote:

> I think this is the one Tim is referring too
> https://www.pennstateind.com/store/L5818.html
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Krause
> *Sent:* Saturday, 27 July 2019 10:35 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: REVO Help
>
>
>
> Penn state industries has what you need.  It's a shop Smith adapter that
> you are looking for.  It fits over the 5/8" shaft and it has the 1-8
> threads that fit most chucks.
>
> On Jul 27, 2019, at 4:21 AM, Tim Ziegler  wrote:
>
> Hey good morning Ray,
>
>
>
> Have you checked with Legacy them selves?
>
> I just bought my LOM 1200 this winter from a private party, and was able
> to purchase several things. Gears, index plates,
>
> T nuts, thread adapters etc...direct from Legacy.  Was not super fast as
> some was still being made as the order come in.
>
> Of course I am not sure exactly what you need but sure worth checking out
> right guys?
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Sat, Jul 27, 2019 at 6:12 AM Ray Clements  wrote:
>
> Thanks Bill – that’s just what I need.  Can someone  tell me what a 3/8-
> 24 thread is?  Is that 3/8” diameter and 24 tpi?
>
>
>
> Ideally I’d like an insert for my Supernova Chuck but not found one with
> that small a diameter.  There is a firm that will cut a customised one I
> found – now all I have to do is find them again 
>
>
>
>
>
> Ray
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *
> bulke...@mmnet.com.au
> *Sent:* Saturday, July 27, 2019 2:28 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* RE: REVO Help
>
>
>
> The revo to my knowledge never had a morse taper. Only people modifying
> the mill would have. as for the thread on the headstock look at the
> attached pic legacy used to sell a chuck to fit the thread size is on the
> pic of their add from way back when
>
>
>
> Bill
>
>
>
>
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Brafield Bodger
> *Sent:* Saturday, 27 July 2019 3:15 AM
> *To:* Legacy Ornamental Mills 
> *Subject:* REVO Help
>
>
>
> OK - here we go.
>
>
>
> The REVO was supposed to have a 2MT morse taper - but for the life of me I
> cannot find out where it is.  Anyone?
>
>
>
> Does anyone know what the thread is on the headstock - there is a nut
> holding the Index Hub (female) to the geared section?
>
>
>
> If you do/dont know the size of the thread - do you know any chuck or
> drill chuck that fits?
>
>
>
> Thanks.
>
>
>
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/a5c635b2-ad6f-4450-893a-172e3adb88c2%40googlegroups.com
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/a5c635b2-ad6f-4450-893a-172e3adb88c2%40googlegroups.com?utm_medium=email_source=footer>
> .
>
>
>
> [image:
> https://ipmcdn.avast.com/images/icons/icon-envelope-tick-round-orange-animated-no-repeat-v1.gif]
> <https://www.avast.com/sig-email?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
>
> Virus-free. www.avast.com
> <https://www.avast.com/sig-email?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+u

RE: REVO Help

[bulkeley]

The thread is 3/8 unf (Unified National Fine Thread)  3/8 of an inch diameter 
0.375” and 24 threads per inch

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Ray Clements
Sent: Saturday, 27 July 2019 9:12 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: REVO Help

 

Thanks Bill – that’s just what I need.  Can someone  tell me what a 3/8- 24 
thread is?  Is that 3/8” diameter and 24 tpi?

 

Ideally I’d like an insert for my Supernova Chuck but not found one with that 
small a diameter.  There is a firm that will cut a customised one I found – now 
all I have to do is find them again 

 

 

Ray

 

From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of 
bulke...@mmnet.com.au <mailto:bulke...@mmnet.com.au> 
Sent: Saturday, July 27, 2019 2:28 AM
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com> 
Subject: RE: REVO Help

 

The revo to my knowledge never had a morse taper. Only people modifying the 
mill would have. as for the thread on the headstock look at the attached pic 
legacy used to sell a chuck to fit the thread size is on the pic of their add 
from way back when

 

Bill

 

 

 

From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Brafield Bodger
Sent: Saturday, 27 July 2019 3:15 AM
To: Legacy Ornamental Mills mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: REVO Help

 

OK - here we go.

 

The REVO was supposed to have a 2MT morse taper - but for the life of me I 
cannot find out where it is.  Anyone?

 

Does anyone know what the thread is on the headstock - there is a nut holding 
the Index Hub (female) to the geared section?

 

If you do/dont know the size of the thread - do you know any chuck or drill 
chuck that fits?

 

Thanks.

 

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/a5c635b2-ad6f-4450-893a-172e3adb88c2%40googlegroups.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/a5c635b2-ad6f-4450-893a-172e3adb88c2%40googlegroups.com?utm_medium=email_source=footer>
 .

 


 
<https://www.avast.com/sig-email?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
 

Virus-free.  
<https://www.avast.com/sig-email?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
 www.avast.com 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000701d5441a%2490370120%24b0a50360%24%40mmnet.com.au
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/000701d5441a%2490370120%24b0a50360%24%40mmnet.com.au?utm_medium=email_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/!%26!AAAuAAWidzIP7QpEnnD3kqJmMtQBAMO2jhD3dRHOtM0AqgC7tuYAAA4AABCxm6lhq%2BrvTb97/CvE3pxqAQA%3D%40sky.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/!%26!AAAuAAWidzIP7QpEnnD3kqJmMtQBAMO2jhD3dRHOtM0AqgC7tuYAAA4AABCxm6lhq%2BrvTb97/CvE3pxqAQA%3D%40sky.com?utm_medium=email_source=footer>
 .



---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/01d54478%24542cbcc0%24fc863640%24%40mmnet.com.au.

Re: REVO Help

[Tim Krause]

Penn state industries has what you need.  It's a shop Smith adapter that you 
are looking for.  It fits over the 5/8" shaft and it has the 1-8 threads that 
fit most chucks.

On Jul 27, 2019, 4:21 AM, at 4:21 AM, Tim Ziegler  wrote:
>Hey good morning Ray,
>
>Have you checked with Legacy them selves?
>I just bought my LOM 1200 this winter from a private party, and was
>able to
>purchase several things. Gears, index plates,
>T nuts, thread adapters etc...direct from Legacy.  Was not super fast
>as
>some was still being made as the order come in.
>Of course I am not sure exactly what you need but sure worth checking
>out
>right guys?
>
>Kind Regards,
>
>Timothy J. Ziegler
>Ziegler WoodWork & Specialty
>14171 160th Ave.
>Foreston MN 56330
>
>320-294-5798 shop
>320-630-2243 cell
>
>
>On Sat, Jul 27, 2019 at 6:12 AM Ray Clements  wrote:
>
>> Thanks Bill – that’s just what I need.  Can someone  tell me what a
>3/8-
>> 24 thread is?  Is that 3/8” diameter and 24 tpi?
>>
>>
>>
>> Ideally I’d like an insert for my Supernova Chuck but not found one
>with
>> that small a diameter.  There is a firm that will cut a customised
>one I
>> found – now all I have to do is find them again 
>>
>>
>>
>>
>>
>> Ray
>>
>>
>>
>> *From:* legacy-ornamental-mills@googlegroups.com <
>> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *
>> bulke...@mmnet.com.au
>> *Sent:* Saturday, July 27, 2019 2:28 AM
>> *To:* legacy-ornamental-mills@googlegroups.com
>> *Subject:* RE: REVO Help
>>
>>
>>
>> The revo to my knowledge never had a morse taper. Only people
>modifying
>> the mill would have. as for the thread on the headstock look at the
>> attached pic legacy used to sell a chuck to fit the thread size is on
>the
>> pic of their add from way back when
>>
>>
>>
>> Bill
>>
>>
>>
>>
>>
>>
>>
>> *From:* legacy-ornamental-mills@googlegroups.com <
>> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Brafield
>Bodger
>> *Sent:* Saturday, 27 July 2019 3:15 AM
>> *To:* Legacy Ornamental Mills
>
>> *Subject:* REVO Help
>>
>>
>>
>> OK - here we go.
>>
>>
>>
>> The REVO was supposed to have a 2MT morse taper - but for the life of
>me I
>> cannot find out where it is.  Anyone?
>>
>>
>>
>> Does anyone know what the thread is on the headstock - there is a nut
>> holding the Index Hub (female) to the geared section?
>>
>>
>>
>> If you do/dont know the size of the thread - do you know any chuck or
>> drill chuck that fits?
>>
>>
>>
>> Thanks.
>>
>>
>>
>>
>>
>> --
>> You received this message because you are subscribed to the Google
>Groups
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it,
>send an
>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>> To view this discussion on the web visit
>>
>https://groups.google.com/d/msgid/legacy-ornamental-mills/a5c635b2-ad6f-4450-893a-172e3adb88c2%40googlegroups.com
>>
><https://groups.google.com/d/msgid/legacy-ornamental-mills/a5c635b2-ad6f-4450-893a-172e3adb88c2%40googlegroups.com?utm_medium=email_source=footer>
>> .
>>
>>
>>
>>
>>
><https://www.avast.com/sig-email?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
>>
>> Virus-free. www.avast.com
>>
><https://www.avast.com/sig-email?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
>>
>> --
>> You received this message because you are subscribed to the Google
>Groups
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it,
>send an
>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>> To view this discussion on the web visit
>>
>https://groups.google.com/d/msgid/legacy-ornamental-mills/000701d5441a%2490370120%24b0a50360%24%40mmnet.com.au
>>
><https://groups.google.com/d/msgid/legacy-ornamental-mills/000701d5441a%2490370120%24b0a50360%24%40mmnet.com.au?utm_medium=email_source=footer>
>> .
>>
>> --
>> You received this message because you are subscribed to the Google
>Groups
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it,
>send an
>> email to legacy-ornamental-mills+uns

RE: REVO Help

[bulkeley]

It’s a standard 4 jaw chuck with 1 inch by 8 tpi  and supplied with a screw in 
adaptor then it all slips on the revos spindle and done up with grub screws you 
can see it all in the pic in the last posting I sent

 

Bill

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Richard Ellis
Sent: Saturday, 27 July 2019 4:26 PM
To: Legacy Ornamental Mills 
Subject: Re: REVO Help

 

Hi Bill

I have one of those small chucks, it came with the Revo with all the pen making 
equipment. That looks to me as that might be the thread size that Ray was 
asking about  3/8 24 tpi.

Will have a look later today.

I wonder how Legacy fit the larger chuck, slip on and nut, or just slip on.

I bought the larger type chuck but can't for the life of me what I wanted it 
for !???

Richard

On Saturday, July 27, 2019 at 2:44:58 AM UTC+1, aussiman wrote:

Ps I almost forgot legacy also used to sell a chuck for the revo too

 

Bill

 

From: legacy-orna...@googlegroups.com   
 > On Behalf Of 
bulk...@mmnet.com.au  
Sent: Saturday, 27 July 2019 11:28 AM
To: legacy-orna...@googlegroups.com  
Subject: RE: REVO Help

 

The revo to my knowledge never had a morse taper. Only people modifying the 
mill would have. as for the thread on the headstock look at the attached pic 
legacy used to sell a chuck to fit the thread size is on the pic of their add 
from way back when

 

Bill

 

 

 

From: legacy-orna...@googlegroups.com   
 > On Behalf Of Brafield Bodger
Sent: Saturday, 27 July 2019 3:15 AM
To: Legacy Ornamental Mills  >
Subject: REVO Help

 

OK - here we go.

 

The REVO was supposed to have a 2MT morse taper - but for the life of me I 
cannot find out where it is.  Anyone?

 

Does anyone know what the thread is on the headstock - there is a nut holding 
the Index Hub (female) to the geared section?

 

If you do/dont know the size of the thread - do you know any chuck or drill 
chuck that fits?

 

Thanks.

 

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com  .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/a5c635b2-ad6f-4450-893a-172e3adb88c2%40googlegroups.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/a5c635b2-ad6f-4450-893a-172e3adb88c2%40googlegroups.com?utm_medium=email_source=footer>
 .

 


 
<https://www.avast.com/sig-email?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
 

Virus-free.  
<https://www.avast.com/sig-email?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
 www.avast.com 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com  .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000701d5441a%2490370120%24b0a50360%24%40mmnet.com.au
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/000701d5441a%2490370120%24b0a50360%24%40mmnet.com.au?utm_medium=email_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/01936454-bdd9-40fd-97fe-57749f63ea69%40googlegroups.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/01936454-bdd9-40fd-97fe-57749f63ea69%40googlegroups.com?utm_medium=email_source=footer>
 .



---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000e01d54474%24c53bbfa0%244fb33ee0%24%40mmnet.com.au.

RE: REVO Help

[Ray Clements]

Thanks Bill – that’s just what I need.  Can someone  tell me what a 3/8- 24 
thread is?  Is that 3/8” diameter and 24 tpi?

 

Ideally I’d like an insert for my Supernova Chuck but not found one with that 
small a diameter.  There is a firm that will cut a customised one I found – now 
all I have to do is find them again 

 

 

Ray

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of bulke...@mmnet.com.au
Sent: Saturday, July 27, 2019 2:28 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: REVO Help

 

The revo to my knowledge never had a morse taper. Only people modifying the 
mill would have. as for the thread on the headstock look at the attached pic 
legacy used to sell a chuck to fit the thread size is on the pic of their add 
from way back when

 

Bill

 

 

 

From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Brafield Bodger
Sent: Saturday, 27 July 2019 3:15 AM
To: Legacy Ornamental Mills mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: REVO Help

 

OK - here we go.

 

The REVO was supposed to have a 2MT morse taper - but for the life of me I 
cannot find out where it is.  Anyone?

 

Does anyone know what the thread is on the headstock - there is a nut holding 
the Index Hub (female) to the geared section?

 

If you do/dont know the size of the thread - do you know any chuck or drill 
chuck that fits?

 

Thanks.

 

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/a5c635b2-ad6f-4450-893a-172e3adb88c2%40googlegroups.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/a5c635b2-ad6f-4450-893a-172e3adb88c2%40googlegroups.com?utm_medium=email_source=footer>
 .

 


 
<https://www.avast.com/sig-email?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
 

Virus-free.  
<https://www.avast.com/sig-email?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
 www.avast.com 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000701d5441a%2490370120%24b0a50360%24%40mmnet.com.au
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/000701d5441a%2490370120%24b0a50360%24%40mmnet.com.au?utm_medium=email_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/!%26!AAAuAAWidzIP7QpEnnD3kqJmMtQBAMO2jhD3dRHOtM0AqgC7tuYAAA4AABCxm6lhq%2BrvTb97/CvE3pxqAQA%3D%40sky.com.

RE: REVO Help

[bulkeley]

Ps I almost forgot legacy also used to sell a chuck for the revo too

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of bulke...@mmnet.com.au
Sent: Saturday, 27 July 2019 11:28 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: REVO Help

 

The revo to my knowledge never had a morse taper. Only people modifying the 
mill would have. as for the thread on the headstock look at the attached pic 
legacy used to sell a chuck to fit the thread size is on the pic of their add 
from way back when

 

Bill

 

 

 

From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Brafield Bodger
Sent: Saturday, 27 July 2019 3:15 AM
To: Legacy Ornamental Mills mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: REVO Help

 

OK - here we go.

 

The REVO was supposed to have a 2MT morse taper - but for the life of me I 
cannot find out where it is.  Anyone?

 

Does anyone know what the thread is on the headstock - there is a nut holding 
the Index Hub (female) to the geared section?

 

If you do/dont know the size of the thread - do you know any chuck or drill 
chuck that fits?

 

Thanks.

 

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/a5c635b2-ad6f-4450-893a-172e3adb88c2%40googlegroups.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/a5c635b2-ad6f-4450-893a-172e3adb88c2%40googlegroups.com?utm_medium=email_source=footer>
 .

 


 
<https://www.avast.com/sig-email?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
 

Virus-free.  
<https://www.avast.com/sig-email?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
 www.avast.com 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000701d5441a%2490370120%24b0a50360%24%40mmnet.com.au
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/000701d5441a%2490370120%24b0a50360%24%40mmnet.com.au?utm_medium=email_source=footer>
 .



---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000f01d5441c%24df3ce260%249db6a720%24%40mmnet.com.au.

RE: REVO Help

[bulkeley]

The revo to my knowledge never had a morse taper. Only people modifying the 
mill would have. as for the thread on the headstock look at the attached pic 
legacy used to sell a chuck to fit the thread size is on the pic of their add 
from way back when

 

Bill

 

 

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Brafield Bodger
Sent: Saturday, 27 July 2019 3:15 AM
To: Legacy Ornamental Mills 
Subject: REVO Help

 

OK - here we go.

 

The REVO was supposed to have a 2MT morse taper - but for the life of me I 
cannot find out where it is.  Anyone?

 

Does anyone know what the thread is on the headstock - there is a nut holding 
the Index Hub (female) to the geared section?

 

If you do/dont know the size of the thread - do you know any chuck or drill 
chuck that fits?

 

Thanks.

 

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/a5c635b2-ad6f-4450-893a-172e3adb88c2%40googlegroups.com
 

 .



---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000701d5441a%2490370120%24b0a50360%24%40mmnet.com.au.

Re: REVO Help

[Brafield Bodger]

Yes - got it thanks.  Nice to meet you today.

On Friday, 26 July 2019 18:15:11 UTC+1, Brafield Bodger wrote:
>
> OK - here we go.
>
> The REVO was supposed to have a 2MT morse taper - but for the life of me I 
> cannot find out where it is.  Anyone?
>
> Does anyone know what the thread is on the headstock - there is a nut 
> holding the Index Hub (female) to the geared section?
>
> If you do/dont know the size of the thread - do you know any chuck or 
> drill chuck that fits?
>
> Thanks.
>
>
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/d7287ead-66cb-49c1-b91d-88ad54dd1ad3%40googlegroups.com.

Re: REVO Help

[Richard Ellis]

Ray
I did send you an email as to how I fitted a chuck to my Revo. I made an 
adapter that enabled me to fit a small chuck. From Rutlands Tools
I do not think the Revo could have a 2 MT there does not seem to be enough 
room. When you come over to see me you will see my adapter. If you know an 
engineer with a metal work lathe is a quite easy to do, Just take him the 
headstock spindle for an exact fit. Tomorrow I will see if I can find my 
thread guages If you want , if I still have them ???  for the thread 
size
Richard

On Friday, July 26, 2019 at 6:15:11 PM UTC+1, Brafield Bodger wrote:
>
> OK - here we go.
>
> The REVO was supposed to have a 2MT morse taper - but for the life of me I 
> cannot find out where it is.  Anyone?
>
> Does anyone know what the thread is on the headstock - there is a nut 
> holding the Index Hub (female) to the geared section?
>
> If you do/dont know the size of the thread - do you know any chuck or 
> drill chuck that fits?
>
> Thanks.
>
>
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/40e4f867-8536-49f3-88b7-2f963474384d%40googlegroups.com.