subject:"Re\: Shoe Horn Handle on the REVO"

Re: Shoe Horn Handle on the REVO

2023-06-17 Thread Jeff Richmond

Nice Job Tim 👍Jeff from Connecticut Sent from my iPhoneOn Jun 17, 2023, at 2:25 PM, Tim Ziegler wrote:Hey Curt, you'd asked about the Router I was using on my REVO, here it is, Mac, and any exotic wood guru, I also attached a few pic's of the wood species I used. in the raw so one can get a better look at it.Kind Regards,Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330320-294-5798 shop320-630-2243 cellOn Mon, Jun 12, 2023 at 9:41 PM Tim Ziegler wrote:Good evening,Well I thought it was time to turn something of use again so I had a shoe horn kit that has been sitting in my "Kits" drawer long enough. So I turned this on my REVO. 6 start 3/8 pitch spiral. about 9.5 inches long. Species, honestly I have to look it up, so stay tuned. No its not cherry either. Fun little project that will serve me well. Kind Regards,Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330320-294-5798 shop320-630-2243 cell

--
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLGtuu7j_eu1%2BOqe92SCe%2BJrs78ZuJTi0R19vnMK-PrGrA%40mail.gmail.com.

Re: Shoe Horn Handle on the REVO

2023-06-17 Thread 'Curt George' via Legacy Ornamental Mills

Nice!
Thank you.
C.A.G.
On Saturday, June 17, 2023 at 02:25:55 PM EDT, Tim Ziegler
wrote:

Hey Curt, you'd asked about the Router I was using on my REVO, here it is,
Mac, and any exotic wood guru, I also attached a few pic's of the wood species
I used. in the raw so one can get a better look at it.
Kind Regards,
Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330
320-294-5798 shop320-630-2243 cell

On Mon, Jun 12, 2023 at 9:41 PM Tim Ziegler wrote:

Good evening,
Well I thought it was time to turn something of use again so I had a shoe horn
kit that has been sitting in my "Kits" drawer long enough. So I turned this on
my REVO. 6 start 3/8 pitch spiral. about 9.5 inches long. Species, honestly I
have to look it up, so stay tuned. No its not cherry either. Fun little project
that will serve me well.
Kind Regards,
Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330
320-294-5798 shop320-630-2243 cell

--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLGtuu7j_eu1%2BOqe92SCe%2BJrs78ZuJTi0R19vnMK-PrGrA%40mail.gmail.com.

--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/1707640309.696579.1687041492282%40mail.yahoo.com.

Re: Shoe Horn Handle on the REVO

2023-06-16 Thread Tim Ziegler

Hey Bill & all,

So the finished diameter is 5/8 on the tapered end and the large end is 7/8.
The original size of my blank was about 1 1/8, I milled it down to about 1
inch then proceeded to run the taper.
>From there I did all the pretty stuff.
12 flutes and 6 starts on the spiral or (rope)

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Fri, Jun 16, 2023 at 12:59 AM  wrote:

> Another question I’m not sure if it was asked how many flutes? and what
> dia was the blank?
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Friday, June 16, 2023 12:54 PM
> *To:* LOM Group ; Tim Ziegler <
> timjzieg...@gmail.com>
> *Subject:* Re: Shoe Horn Handle on the REVO
>
>
>
> So I was asked today what bits I used on my shoe horn handle so I have
> attached the two I used to do the
>
> rope, and the flutes.
>
> Magnate still makes these bits if anyone is interested.
>
> I am still contemplating the species of wood, though Mac has been a great
> help, I did not buy
>
> much exotic wood until the last couple of years.
>
> It could be a piece of  GRANADILLO. Scientific Name:* Platymiscium* spp.
> Also known as: Macacauba, Cristobal, Coyote, Macawood, Amazon Rosewood,
> Nambar, Trebol, Guayacan. Status: RARE. Origin: Mexico, Central America
> down to the Brazilian Amazon region.
>
> *I have ordered that in a fairly large quantity so.?*
>
> *Now I am not saying it is, as Mac showed some TEAK that really looked
> close and has*
>
> *less pronounced grain, which is what the handle looks like. *
>
> *Maybe a picture of the wood in the square will help lol. *
>
> *Stay tuned for the mystery wood.*
>
>
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Mon, Jun 12, 2023 at 9:41 PM Tim Ziegler  wrote:
>
> Good evening,
>
>
>
> Well I thought it was time to turn something of use again so I had a shoe
> horn kit that has been sitting in my "Kits" drawer long enough.
>
> So I turned this on my REVO.
>
> 6 start 3/8 pitch spiral. about 9.5 inches long.
>
> Species, honestly I have to look it up, so stay tuned. No its not cherry
> either.
>
> Fun little project that will serve me well.
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFufPZhEbTmSD%2BSgU26VEZiWoJwn3UPPH-at1iDvrOjZA%40mail.gmail.com
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFufPZhEbTmSD%2BSgU26VEZiWoJwn3UPPH-at1iDvrOjZA%40mail.gmail.com?utm_medium=email&utm_source=footer>
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/01d9a017%24bb7db510%2432791f30%24%40mmnet.com.au
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/01d9a017%24bb7db510%2432791f30%24%40mmnet.com.au?utm_medium=email&utm_source=footer>
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLH2UoyNNYaKt5rFxFFx9_LsmR4kgBO%2ByLQUY_Lgq%2BtUaA%40mail.gmail.com.

Re: Shoe Horn Handle on the REVO

2023-06-16 Thread Tim Ziegler

thanks Curt.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Thu, Jun 15, 2023 at 11:06 PM 'Curt George' via Legacy Ornamental Mills <
legacy-ornamental-mills@googlegroups.com> wrote:

> Hey there Tim
>
> Thanks for the note on the router bits. choosing the right bit profile and
> the pitch all really matter when working with small spindles. using the
> wrong bit and or pitch will throw off the look of any job.
> I still say, you Hit a home run on this project.  Good for you!
>
> Have a good night.
>
> C.A.G.
>
> On Thursday, June 15, 2023 at 10:54:07 PM EDT, Tim Ziegler <
> timjzieg...@gmail.com> wrote:
>
>
> So I was asked today what bits I used on my shoe horn handle so I have
> attached the two I used to do the
> rope, and the flutes.
> Magnate still makes these bits if anyone is interested.
> I am still contemplating the species of wood, though Mac has been a great
> help, I did not buy
> much exotic wood until the last couple of years.
> It could be a piece of  GRANADILLO. Scientific Name: Platymiscium spp.
> Also known as: Macacauba, Cristobal, Coyote, Macawood, Amazon Rosewood,
> Nambar, Trebol, Guayacan. Status: RARE. Origin: Mexico, Central America
> down to the Brazilian Amazon region.
> *I have ordered that in a fairly large quantity so.?*
> *Now I am not saying it is, as Mac showed some TEAK that really looked
> close and has*
> *less pronounced grain, which is what the handle looks like. *
> *Maybe a picture of the wood in the square will help lol. *
> *Stay tuned for the mystery wood.*
>
>
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> Foreston MN 56330
>
> 320-294-5798 shop
> 320-630-2243 cell
>
>
> On Mon, Jun 12, 2023 at 9:41 PM Tim Ziegler  wrote:
>
> Good evening,
>
> Well I thought it was time to turn something of use again so I had a shoe
> horn kit that has been sitting in my "Kits" drawer long enough.
> So I turned this on my REVO.
> 6 start 3/8 pitch spiral. about 9.5 inches long.
> Species, honestly I have to look it up, so stay tuned. No its not cherry
> either.
> Fun little project that will serve me well.
>
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> Foreston MN 56330
>
> 320-294-5798 shop
> 320-630-2243 cell
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFufPZhEbTmSD%2BSgU26VEZiWoJwn3UPPH-at1iDvrOjZA%40mail.gmail.com
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/877957623.406168.1686888392230%40mail.yahoo.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLF3qoGmYk3CX3eS50%2BgCM7SO%3DztwQcjsGEvYAT0C9pUzA%40mail.gmail.com.

RE: Shoe Horn Handle on the REVO

2023-06-15 Thread bulkeley

Another question I’m not sure if it was asked how many flutes? and what dia was 
the blank?

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Friday, June 16, 2023 12:54 PM
To: LOM Group ; Tim Ziegler 

Subject: Re: Shoe Horn Handle on the REVO

 

So I was asked today what bits I used on my shoe horn handle so I have attached 
the two I used to do the 

rope, and the flutes. 

Magnate still makes these bits if anyone is interested. 

I am still contemplating the species of wood, though Mac has been a great help, 
I did not buy

much exotic wood until the last couple of years. 

It could be a piece of  GRANADILLO. Scientific Name: Platymiscium spp. Also 
known as: Macacauba, Cristobal, Coyote, Macawood, Amazon Rosewood, Nambar, 
Trebol, Guayacan. Status: RARE. Origin: Mexico, Central America down to the 
Brazilian Amazon region.

I have ordered that in a fairly large quantity so.?

Now I am not saying it is, as Mac showed some TEAK that really looked close and 
has

less pronounced grain, which is what the handle looks like. 

Maybe a picture of the wood in the square will help lol. 

Stay tuned for the mystery wood.

 




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Mon, Jun 12, 2023 at 9:41 PM Tim Ziegler mailto:timjzieg...@gmail.com> > wrote:

Good evening,

 

Well I thought it was time to turn something of use again so I had a shoe horn 
kit that has been sitting in my "Kits" drawer long enough. 

So I turned this on my REVO. 

6 start 3/8 pitch spiral. about 9.5 inches long. 

Species, honestly I have to look it up, so stay tuned. No its not cherry 
either. 

Fun little project that will serve me well. 




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFufPZhEbTmSD%2BSgU26VEZiWoJwn3UPPH-at1iDvrOjZA%40mail.gmail.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFufPZhEbTmSD%2BSgU26VEZiWoJwn3UPPH-at1iDvrOjZA%40mail.gmail.com?utm_medium=email&utm_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/01d9a017%24bb7db510%2432791f30%24%40mmnet.com.au.

Re: Shoe Horn Handle on the REVO

2023-06-15 Thread 'Curt George' via Legacy Ornamental Mills

Hey there Tim
Thanks for the note on the router bits. choosing the right bit profile and the
pitch all really matter when working with small spindles. using the wrong bit
and or pitch will throw off the look of any job.I still say, you Hit a home run
on this project. Good for you!
Have a good night.
C.A.G.
On Thursday, June 15, 2023 at 10:54:07 PM EDT, Tim Ziegler
wrote:

So I was asked today what bits I used on my shoe horn handle so I have
attached the two I used to do the rope, and the flutes. Magnate still makes
these bits if anyone is interested. I am still contemplating the species of
wood, though Mac has been a great help, I did not buymuch exotic wood until the
last couple of years. It could be a piece of GRANADILLO. Scientific Name:
Platymiscium spp. Also known as: Macacauba, Cristobal, Coyote, Macawood, Amazon
Rosewood, Nambar, Trebol, Guayacan. Status: RARE. Origin: Mexico, Central
America down to the Brazilian Amazon region.I have ordered that in a fairly
large quantity so.?Now I am not saying it is, as Mac showed some TEAK that
really looked close and hasless pronounced grain, which is what the handle
looks like. Maybe a picture of the wood in the square will help lol. Stay tuned
for the mystery wood.

Kind Regards,
Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330
320-294-5798 shop320-630-2243 cell

On Mon, Jun 12, 2023 at 9:41 PM Tim Ziegler wrote:

--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFufPZhEbTmSD%2BSgU26VEZiWoJwn3UPPH-at1iDvrOjZA%40mail.gmail.com.

--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/877957623.406168.1686888392230%40mail.yahoo.com.

Re: Shoe Horn Handle on the REVO

2023-06-15 Thread Tim Ziegler

So I was asked today what bits I used on my shoe horn handle so I have
attached the two I used to do the
rope, and the flutes.
Magnate still makes these bits if anyone is interested.
I am still contemplating the species of wood, though Mac has been a great
help, I did not buy
much exotic wood until the last couple of years.
It could be a piece of  GRANADILLO. Scientific Name: Platymiscium spp. Also
known as: Macacauba, Cristobal, Coyote, Macawood, Amazon Rosewood, Nambar,
Trebol, Guayacan. Status: RARE. Origin: Mexico, Central America down to the
Brazilian Amazon region.
*I have ordered that in a fairly large quantity so.?*
*Now I am not saying it is, as Mac showed some TEAK that really looked
close and has*
*less pronounced grain, which is what the handle looks like. *
*Maybe a picture of the wood in the square will help lol. *
*Stay tuned for the mystery wood.*

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell

On Mon, Jun 12, 2023 at 9:41 PM Tim Ziegler  wrote:

> Good evening,
>
> Well I thought it was time to turn something of use again so I had a shoe
> horn kit that has been sitting in my "Kits" drawer long enough.
> So I turned this on my REVO.
> 6 start 3/8 pitch spiral. about 9.5 inches long.
> Species, honestly I have to look it up, so stay tuned. No its not cherry
> either.
> Fun little project that will serve me well.
>
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> Foreston MN 56330
>
> 320-294-5798 shop
> 320-630-2243 cell
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFufPZhEbTmSD%2BSgU26VEZiWoJwn3UPPH-at1iDvrOjZA%40mail.gmail.com.

Re: Shoe Horn Handle on the REVO

2023-06-14 Thread Tim Ziegler

I just can't recall ever buying anything like that. But one never knows lol.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Wed, Jun 14, 2023 at 12:18 AM 'Curt George' via Legacy Ornamental Mills <
legacy-ornamental-mills@googlegroups.com> wrote:

> Hey MAC
>
> I think you are right.  Hard, dense wood, radish heugh.
> Jatoba - AKA "Brazilian Cherry" looks like it fits the bill. ;-)
>
> Good call.
>
> C.A.G.
>
> On Wednesday, June 14, 2023 at 01:14:01 AM EDT, M.W.Foscue <
> mwfos...@earthlink.net> wrote:
>
>
> Tim,
>
>
>
> One more possibility (probability):
>
> Jatoba - AKA "Brazilian Cherry"
>
>
>
> Check it out.
>
> Mac
> ----------
> --------------
>
> -Original Message-
> From: 
> Sent: Jun 13, 2023 2:23 PM
> To: 
> Subject: Re: Shoe Horn Handle on the REVO
>
>
> Well of them 3 it really looks like this.
> I just have to remember if I would have done a job with that species.
>
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> Foreston MN 56330
>
> 320-294-5798 shop
> 320-630-2243 cell
>
> On Tue, Jun 13, 2023 at 6:13 AM  wrote:
>
> https://www.wood-database.com/cumaru/
>
> https://www.wood-database.com/african-padauk/
>
> https://www.wood-database.com/peruvian-walnut/
>
>
>
> here you go Tim
> ------
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Tuesday, June 13, 2023 8:51 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Shoe Horn Handle on the REVO
>
>
>
> Thanks Mac,
>
>
>
> I am actually still trying to decide what species it is. I don't recall
> any of those species you mentioned.
>
> But I will be looking it up. Just happened to be the exact size I was
> looking for and was a very dense and
>
> hard wood that seemed it would take the everyday use of a shoe horn.
>
> Stay tuned.
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
> --
> --
>  On Mon, Jun 12, 2023 at 10:03 PM M.W.Foscue 
> wrote:
>
> Tim,
>
>
>
> Very nice - thanks for sharing.
>
> The pics are low res. - so a bit difficult deciding the wood type.  But a
> couple guesses are:
>
> Peruvian Walnut?
>
> Paduk?
>
> Cumaru?
>
>
>
> Cheers!
>
> Mac
> --
> --
>
> -Original Message-
> From: 
> Sent: Jun 12, 2023 10:41 PM
> To: LOM Group , Tim Ziegler <
> timjzieg...@gmail.com>
> Subject: Shoe Horn Handle on the REVO
>
>
>
> Good evening,
>
>
>
> Well I thought it was time to turn something of use again so I had a shoe
> horn kit that has been sitting in my "Kits" drawer long enough.
>
> So I turned this on my REVO.
>
> 6 start 3/8 pitch spiral. about 9.5 inches long.
>
> Species, honestly I have to look it up, so stay tuned. No its not cherry
> either.
>
> Fun little project that will serve me well.
>
>
> Kind Regards,
>
> Timothy J. Ziegler
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/0e705ce6-c147-a44d-0c46-26eb284b200b%40earthlink.net
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/0e705ce6-c147-a44d-0c46-26eb284b200b%40earthlink.net?utm_medium=email&utm_source=footer>
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/1929954088.1429981.1686719932388%40mail.yahoo.com
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/1929954088.1429981.1686719932388%40mail.yahoo.com?utm_medium=email&utm_source=footer>
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLH3ANqPA6DViODrLfNT3Tr0Ztw26jQmwVLBPPn%2BHaRADA%40mail.gmail.com.

Re: Shoe Horn Handle on the REVO

2023-06-14 Thread Tim Ziegler

Thanks Mac I will.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Wed, Jun 14, 2023 at 12:14 AM M.W.Foscue  wrote:

> Tim,
>
>
>
> One more possibility (probability):
>
> Jatoba - AKA "Brazilian Cherry"
>
>
>
> Check it out.
>
> Mac
> --
> --
>
> -Original Message-
> From: 
> Sent: Jun 13, 2023 2:23 PM
> To: 
> Subject: Re: Shoe Horn Handle on the REVO
>
>
> Well of them 3 it really looks like this.
> I just have to remember if I would have done a job with that species.
>
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> Foreston MN 56330
>
> 320-294-5798 shop
> 320-630-2243 cell
>
> On Tue, Jun 13, 2023 at 6:13 AM  wrote:
>
>> https://www.wood-database.com/cumaru/
>>
>> https://www.wood-database.com/african-padauk/
>>
>> https://www.wood-database.com/peruvian-walnut/
>>
>>
>>
>> here you go Tim
>> --
>>
>> *From:* legacy-ornamental-mills@googlegroups.com <
>> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
>> *Sent:* Tuesday, June 13, 2023 8:51 PM
>> *To:* legacy-ornamental-mills@googlegroups.com
>> *Subject:* Re: Shoe Horn Handle on the REVO
>>
>>
>>
>> Thanks Mac,
>>
>>
>>
>> I am actually still trying to decide what species it is. I don't recall
>> any of those species you mentioned.
>>
>> But I will be looking it up. Just happened to be the exact size I was
>> looking for and was a very dense and
>>
>> hard wood that seemed it would take the everyday use of a shoe horn.
>>
>> Stay tuned.
>>
>>
>> Kind Regards,
>>
>>
>>
>> Timothy J. Ziegler
>> --
>> --
>>  On Mon, Jun 12, 2023 at 10:03 PM M.W.Foscue 
>> wrote:
>>
>> Tim,
>>
>>
>>
>> Very nice - thanks for sharing.
>>
>> The pics are low res. - so a bit difficult deciding the wood type.  But a
>> couple guesses are:
>>
>> Peruvian Walnut?
>>
>> Paduk?
>>
>> Cumaru?
>>
>>
>>
>> Cheers!
>>
>> Mac
>> --
>> --
>>
>> -Original Message-
>> From: 
>> Sent: Jun 12, 2023 10:41 PM
>> To: LOM Group , Tim Ziegler <
>> timjzieg...@gmail.com>
>> Subject: Shoe Horn Handle on the REVO
>>
>>
>>
>> Good evening,
>>
>>
>>
>> Well I thought it was time to turn something of use again so I had a shoe
>> horn kit that has been sitting in my "Kits" drawer long enough.
>>
>> So I turned this on my REVO.
>>
>> 6 start 3/8 pitch spiral. about 9.5 inches long.
>>
>> Species, honestly I have to look it up, so stay tuned. No its not cherry
>> either.
>>
>> Fun little project that will serve me well.
>>
>>
>> Kind Regards,
>>
>> Timothy J. Ziegler
>>
>> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/0e705ce6-c147-a44d-0c46-26eb284b200b%40earthlink.net
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/0e705ce6-c147-a44d-0c46-26eb284b200b%40earthlink.net?utm_medium=email&utm_source=footer>
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEs8x1smfdG5GM1MwRgkR-we2%3Dwv7nwd3-HDVQujvG3mQ%40mail.gmail.com.

Re: Shoe Horn Handle on the REVO

2023-06-14 Thread Tim Ziegler

yup I have 2 more that i need to outfit with motors lol.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Tue, Jun 13, 2023 at 11:52 PM  wrote:

> Totally, once you go drive motors you will never go back to handing crank
> again
>
>
>
> Bill
>
> *From:* 'Curt George' via Legacy Ornamental Mills <
> legacy-ornamental-mills@googlegroups.com>
> *Sent:* Wednesday, June 14, 2023 2:36 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Shoe Horn Handle on the REVO
>
>
>
> Thanks Bill. ;-)
>
>
>
> It (adding the motors) really makes all the Legacy equipment into a Very
> different machine.
>
>
>
> C.A.G.
>
>
>
> On Wednesday, June 14, 2023 at 12:24:41 AM EDT, 
> wrote:
>
>
>
>
>
> I listen to you curt I have a drive motor and a spindle motor on my revo
> for years now
>
>
>
> Bill
>
>
>
> *From:* 'Curt George' via Legacy Ornamental Mills <
> legacy-ornamental-mills@googlegroups.com>
> *Sent:* Wednesday, June 14, 2023 2:00 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Shoe Horn Handle on the REVO
>
>
>
> Drive motor? You mean someone finally listened to me? ;-P
>
>
>
> Keep up the good work, Tim.
>
> I cant wait to see more of your work. ;-)
>
>
>
> Have a good night.
>
>
>
> C.A.G.
>
>
>
> On Tuesday, June 13, 2023 at 10:43:14 PM EDT, Tim Ziegler <
> timjzieg...@gmail.com> wrote:
>
>
>
>
>
> Thanks Mike, it was a lot of fun to do too. I am looking forward to doing
> more small items on the
>
> Revo, since I have a drive motor on it, it really makes it much easier.
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Tue, Jun 13, 2023 at 9:33 PM Mike Newman 
> wrote:
>
> Very nice.  I like the look of the flute/spiral combo design.
>
> On Tuesday, June 13, 2023 at 1:24:45 PM UTC-5 Tim Ziegler wrote:
>
> Thanks Dan
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
> On Tue, Jun 13, 2023 at 8:09 AM cdkr...@gmail.com 
> wrote:
>
> Yes, Tim.  Nicely done!
>
> DanK
>
>
>
> On Tuesday, June 13, 2023 at 7:15:11 AM UTC-4 bulk...@mmnet.com.au wrote:
>
> Me too
>
>
>
> Bill
>
>
>
> *From:* legacy-orna...@googlegroups.com  *On
> Behalf Of *Tim Ziegler
> *Sent:* Tuesday, June 13, 2023 8:53 PM
> *To:* legacy-orna...@googlegroups.com
> *Subject:* Re: Shoe Horn Handle on the REVO
>
>
>
> thanks Bill,
>
> yeah wasn't much for mod's used on it. I sure like how it came out.
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Tue, Jun 13, 2023 at 12:41 AM  wrote:
>
> Very nice Tim totally proves simple looks great.
>
> Done with your new fine pitch gears no doubt
>
>
>
> Bill
>
>
>
> *From:* legacy-orna...@googlegroups.com  *On
> Behalf Of *Tim Ziegler
> *Sent:* Tuesday, June 13, 2023 12:41 PM
> *To:* LOM Group ; Tim Ziegler <
> timjz...@gmail.com>
> *Subject:* Shoe Horn Handle on the REVO
>
>
>
> Good evening,
>
>
>
> Well I thought it was time to turn something of use again so I had a shoe
> horn kit that has been sitting in my "Kits" drawer long enough.
>
> So I turned this on my REVO.
>
> 6 start 3/8 pitch spiral. about 9.5 inches long.
>
> Species, honestly I have to look it up, so stay tuned. No its not cherry
> either.
>
> Fun little project that will serve me well.
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/

Re: Shoe Horn Handle on the REVO

2023-06-14 Thread Tim Ziegler

yes much more control and smoother.
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Tue, Jun 13, 2023 at 11:36 PM 'Curt George' via Legacy Ornamental Mills <
legacy-ornamental-mills@googlegroups.com> wrote:

> Thanks Bill. ;-)
>
> It (adding the motors) really makes all the Legacy equipment into a Very
> different machine.
>
> C.A.G.
>
> On Wednesday, June 14, 2023 at 12:24:41 AM EDT, 
> wrote:
>
>
> I listen to you curt I have a drive motor and a spindle motor on my revo
> for years now
>
>
>
> Bill
>
>
>
> *From:* 'Curt George' via Legacy Ornamental Mills <
> legacy-ornamental-mills@googlegroups.com>
> *Sent:* Wednesday, June 14, 2023 2:00 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Shoe Horn Handle on the REVO
>
>
>
> Drive motor? You mean someone finally listened to me? ;-P
>
>
>
> Keep up the good work, Tim.
>
> I cant wait to see more of your work. ;-)
>
>
>
> Have a good night.
>
>
>
> C.A.G.
>
>
>
> On Tuesday, June 13, 2023 at 10:43:14 PM EDT, Tim Ziegler <
> timjzieg...@gmail.com> wrote:
>
>
>
>
>
> Thanks Mike, it was a lot of fun to do too. I am looking forward to doing
> more small items on the
>
> Revo, since I have a drive motor on it, it really makes it much easier.
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Tue, Jun 13, 2023 at 9:33 PM Mike Newman 
> wrote:
>
> Very nice.  I like the look of the flute/spiral combo design.
>
> On Tuesday, June 13, 2023 at 1:24:45 PM UTC-5 Tim Ziegler wrote:
>
> Thanks Dan
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
> On Tue, Jun 13, 2023 at 8:09 AM cdkr...@gmail.com 
> wrote:
>
> Yes, Tim.  Nicely done!
>
> DanK
>
>
>
> On Tuesday, June 13, 2023 at 7:15:11 AM UTC-4 bulk...@mmnet.com.au wrote:
>
> Me too
>
>
>
> Bill
>
>
>
> *From:* legacy-orna...@googlegroups.com  *On
> Behalf Of *Tim Ziegler
> *Sent:* Tuesday, June 13, 2023 8:53 PM
> *To:* legacy-orna...@googlegroups.com
> *Subject:* Re: Shoe Horn Handle on the REVO
>
>
>
> thanks Bill,
>
> yeah wasn't much for mod's used on it. I sure like how it came out.
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Tue, Jun 13, 2023 at 12:41 AM  wrote:
>
> Very nice Tim totally proves simple looks great.
>
> Done with your new fine pitch gears no doubt
>
>
>
> Bill
>
>
>
> *From:* legacy-orna...@googlegroups.com  *On
> Behalf Of *Tim Ziegler
> *Sent:* Tuesday, June 13, 2023 12:41 PM
> *To:* LOM Group ; Tim Ziegler <
> timjz...@gmail.com>
> *Subject:* Shoe Horn Handle on the REVO
>
>
>
> Good evening,
>
>
>
> Well I thought it was time to turn something of use again so I had a shoe
> horn kit that has been sitting in my "Kits" drawer long enough.
>
> So I turned this on my REVO.
>
> 6 start 3/8 pitch spiral. about 9.5 inches long.
>
> Species, honestly I have to look it up, so stay tuned. No its not cherry
> either.
>
> Fun little project that will serve me well.
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEF7e7aPeZ821y%3D0UXcao2essNCwTukQCNsn1MMR_x79w%40mail.gmail.com
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEF7e7aPeZ821y%3D0UXcao2essNCwTukQCNsn1MMR_x79w%40mail.gmail.com?utm_medium=email&utm_source=footer>
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy O

Re: Shoe Horn Handle on the REVO

2023-06-14 Thread Tim Ziegler

lol
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Tue, Jun 13, 2023 at 11:24 PM  wrote:

> I listen to you curt I have a drive motor and a spindle motor on my revo
> for years now
>
>
>
> Bill
>
>
>
> *From:* 'Curt George' via Legacy Ornamental Mills <
> legacy-ornamental-mills@googlegroups.com>
> *Sent:* Wednesday, June 14, 2023 2:00 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Shoe Horn Handle on the REVO
>
>
>
> Drive motor? You mean someone finally listened to me? ;-P
>
>
>
> Keep up the good work, Tim.
>
> I cant wait to see more of your work. ;-)
>
>
>
> Have a good night.
>
>
>
> C.A.G.
>
>
>
> On Tuesday, June 13, 2023 at 10:43:14 PM EDT, Tim Ziegler <
> timjzieg...@gmail.com> wrote:
>
>
>
>
>
> Thanks Mike, it was a lot of fun to do too. I am looking forward to doing
> more small items on the
>
> Revo, since I have a drive motor on it, it really makes it much easier.
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Tue, Jun 13, 2023 at 9:33 PM Mike Newman 
> wrote:
>
> Very nice.  I like the look of the flute/spiral combo design.
>
> On Tuesday, June 13, 2023 at 1:24:45 PM UTC-5 Tim Ziegler wrote:
>
> Thanks Dan
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
> On Tue, Jun 13, 2023 at 8:09 AM cdkr...@gmail.com 
> wrote:
>
> Yes, Tim.  Nicely done!
>
> DanK
>
>
>
> On Tuesday, June 13, 2023 at 7:15:11 AM UTC-4 bulk...@mmnet.com.au wrote:
>
> Me too
>
>
>
> Bill
>
>
>
> *From:* legacy-orna...@googlegroups.com  *On
> Behalf Of *Tim Ziegler
> *Sent:* Tuesday, June 13, 2023 8:53 PM
> *To:* legacy-orna...@googlegroups.com
> *Subject:* Re: Shoe Horn Handle on the REVO
>
>
>
> thanks Bill,
>
> yeah wasn't much for mod's used on it. I sure like how it came out.
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Tue, Jun 13, 2023 at 12:41 AM  wrote:
>
> Very nice Tim totally proves simple looks great.
>
> Done with your new fine pitch gears no doubt
>
>
>
> Bill
>
>
>
> *From:* legacy-orna...@googlegroups.com  *On
> Behalf Of *Tim Ziegler
> *Sent:* Tuesday, June 13, 2023 12:41 PM
> *To:* LOM Group ; Tim Ziegler <
> timjz...@gmail.com>
> *Subject:* Shoe Horn Handle on the REVO
>
>
>
> Good evening,
>
>
>
> Well I thought it was time to turn something of use again so I had a shoe
> horn kit that has been sitting in my "Kits" drawer long enough.
>
> So I turned this on my REVO.
>
> 6 start 3/8 pitch spiral. about 9.5 inches long.
>
> Species, honestly I have to look it up, so stay tuned. No its not cherry
> either.
>
> Fun little project that will serve me well.
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEF7e7aPeZ821y%3D0UXcao2essNCwTukQCNsn1MMR_x79w%40mail.gmail.com
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEF7e7aPeZ821y%3D0UXcao2essNCwTukQCNsn1MMR_x79w%40mail.gmail.com?utm_medium=email&utm_source=footer>
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/003a01d99db9%24ac355ff0%2404a01fd0%24%40mmnet.com.au
> <https://groups.google.com/d/m

Re: Shoe Horn Handle on the REVO

2023-06-14 Thread Tim Ziegler

It is indeed and a lot of fun learning its little quirks.
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Tue, Jun 13, 2023 at 11:16 PM  wrote:

> Like I always say great mill the revo
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Wednesday, June 14, 2023 12:43 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Shoe Horn Handle on the REVO
>
>
>
> Thanks Mike, it was a lot of fun to do too. I am looking forward to doing
> more small items on the
>
> Revo, since I have a drive motor on it, it really makes it much easier.
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Tue, Jun 13, 2023 at 9:33 PM Mike Newman 
> wrote:
>
> Very nice.  I like the look of the flute/spiral combo design.
>
> On Tuesday, June 13, 2023 at 1:24:45 PM UTC-5 Tim Ziegler wrote:
>
> Thanks Dan
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 <(320)%20294-5798> shop
>
> 320-630-2243 <(320)%20630-2243> cell
>
>
>
> On Tue, Jun 13, 2023 at 8:09 AM cdkr...@gmail.com 
> wrote:
>
> Yes, Tim.  Nicely done!
>
> DanK
>
>
>
> On Tuesday, June 13, 2023 at 7:15:11 AM UTC-4 bulk...@mmnet.com.au wrote:
>
> Me too
>
>
>
> Bill
>
>
>
> *From:* legacy-orna...@googlegroups.com  *On
> Behalf Of *Tim Ziegler
> *Sent:* Tuesday, June 13, 2023 8:53 PM
> *To:* legacy-orna...@googlegroups.com
> *Subject:* Re: Shoe Horn Handle on the REVO
>
>
>
> thanks Bill,
>
> yeah wasn't much for mod's used on it. I sure like how it came out.
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 <(320)%20294-5798> shop
>
> 320-630-2243 <(320)%20630-2243> cell
>
>
>
>
>
> On Tue, Jun 13, 2023 at 12:41 AM  wrote:
>
> Very nice Tim totally proves simple looks great.
>
> Done with your new fine pitch gears no doubt
>
>
>
> Bill
>
>
>
> *From:* legacy-orna...@googlegroups.com  *On
> Behalf Of *Tim Ziegler
> *Sent:* Tuesday, June 13, 2023 12:41 PM
> *To:* LOM Group ; Tim Ziegler <
> timjz...@gmail.com>
> *Subject:* Shoe Horn Handle on the REVO
>
>
>
> Good evening,
>
>
>
> Well I thought it was time to turn something of use again so I had a shoe
> horn kit that has been sitting in my "Kits" drawer long enough.
>
> So I turned this on my REVO.
>
> 6 start 3/8 pitch spiral. about 9.5 inches long.
>
> Species, honestly I have to look it up, so stay tuned. No its not cherry
> either.
>
> Fun little project that will serve me well.
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 <(320)%20294-5798> shop
>
> 320-630-2243 <(320)%20630-2243> cell
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEF7e7aPeZ821y%3D0UXcao2essNCwTukQCNsn1MMR_x79w%40mail.gmail.com
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEF7e7aPeZ821y%3D0UXcao2essNCwTukQCNsn1MMR_x79w%40mail.gmail.com?utm_medium=email&utm_source=footer>
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/003a01d99db9%24ac355ff0%2404a01fd0%24%40mmnet.com.au
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/003a01d99db9%24ac355ff0%2404a01fd0%24%40mmnet.com.au?utm_medium=email&utm_source=footer>
> .
>
> --
> You received this message because you are subscribe

Re: Shoe Horn Handle on the REVO

2023-06-14 Thread Tim Ziegler

wouldn't want it any other way lol.
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Tue, Jun 13, 2023 at 11:00 PM 'Curt George' via Legacy Ornamental Mills <
legacy-ornamental-mills@googlegroups.com> wrote:

> Drive motor? You mean someone finally listened to me? ;-P
>
> Keep up the good work, Tim.
> I cant wait to see more of your work. ;-)
>
> Have a good night.
>
> C.A.G.
>
> On Tuesday, June 13, 2023 at 10:43:14 PM EDT, Tim Ziegler <
> timjzieg...@gmail.com> wrote:
>
>
> Thanks Mike, it was a lot of fun to do too. I am looking forward to doing
> more small items on the
> Revo, since I have a drive motor on it, it really makes it much easier.
>
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> Foreston MN 56330
>
> 320-294-5798 shop
> 320-630-2243 cell
>
>
> On Tue, Jun 13, 2023 at 9:33 PM Mike Newman 
> wrote:
>
> Very nice.  I like the look of the flute/spiral combo design.
>
> On Tuesday, June 13, 2023 at 1:24:45 PM UTC-5 Tim Ziegler wrote:
>
> Thanks Dan
>
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> Foreston MN 56330
>
> 320-294-5798 shop
> 320-630-2243 cell
>
> On Tue, Jun 13, 2023 at 8:09 AM cdkr...@gmail.com 
> wrote:
>
> Yes, Tim.  Nicely done!
> DanK
>
> On Tuesday, June 13, 2023 at 7:15:11 AM UTC-4 bulk...@mmnet.com.au wrote:
>
> Me too
>
>
>
> Bill
>
>
>
> *From:* legacy-orna...@googlegroups.com  *On
> Behalf Of *Tim Ziegler
> *Sent:* Tuesday, June 13, 2023 8:53 PM
> *To:* legacy-orna...@googlegroups.com
> *Subject:* Re: Shoe Horn Handle on the REVO
>
>
>
> thanks Bill,
>
> yeah wasn't much for mod's used on it. I sure like how it came out.
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Tue, Jun 13, 2023 at 12:41 AM  wrote:
>
> Very nice Tim totally proves simple looks great.
>
> Done with your new fine pitch gears no doubt
>
>
>
> Bill
>
>
>
> *From:* legacy-orna...@googlegroups.com  *On
> Behalf Of *Tim Ziegler
> *Sent:* Tuesday, June 13, 2023 12:41 PM
> *To:* LOM Group ; Tim Ziegler <
> timjz...@gmail.com>
> *Subject:* Shoe Horn Handle on the REVO
>
>
>
> Good evening,
>
>
>
> Well I thought it was time to turn something of use again so I had a shoe
> horn kit that has been sitting in my "Kits" drawer long enough.
>
> So I turned this on my REVO.
>
> 6 start 3/8 pitch spiral. about 9.5 inches long.
>
> Species, honestly I have to look it up, so stay tuned. No its not cherry
> either.
>
> Fun little project that will serve me well.
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEF7e7aPeZ821y%3D0UXcao2essNCwTukQCNsn1MMR_x79w%40mail.gmail.com
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEF7e7aPeZ821y%3D0UXcao2essNCwTukQCNsn1MMR_x79w%40mail.gmail.com?utm_medium=email&utm_source=footer>
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/003a01d99db9%24ac355ff0%2404a01fd0%24%40mmnet.com.au
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/003a01d99db9%24ac355ff0%2404a01fd0%24%40mmnet.com.au?utm_medium=email&utm_source=footer>
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental...@googlegroups.com.
>
> To view this discussion on the web visit
> https:/

Re: Shoe Horn Handle on the REVO

2023-06-13 Thread 'Curt George' via Legacy Ornamental Mills

 Hey MAC
I think you are right.  Hard, dense wood, radish heugh. Jatoba - AKA "Brazilian 
Cherry" looks like it fits the bill. ;-)

Good call.
C.A.G.
On Wednesday, June 14, 2023 at 01:14:01 AM EDT, M.W.Foscue 
 wrote:  
 
 
Tim,

 

One more possibility (probability):

Jatoba - AKA "Brazilian Cherry"

 

Check it out.

Mac

-Original Message-
From: 
Sent: Jun 13, 2023 2:23 PM
To: 
Subject: Re: Shoe Horn Handle on the REVO

 
Well of them 3 it really looks like this. I just have to remember if I would 
have done a job with that species. 
Kind Regards, Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th 
Ave.Foreston MN 56330 320-294-5798 shop320-630-2243 cell
On Tue, Jun 13, 2023 at 6:13 AM  wrote:

https://www.wood-database.com/cumaru/

https://www.wood-database.com/african-padauk/

https://www.wood-database.com/peruvian-walnut/

 

here you go Tim


From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Tuesday, June 13, 2023 8:51 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Shoe Horn Handle on the REVO

 

Thanks Mac,

 

I am actually still trying to decide what species it is. I don't recall any of 
those species you mentioned. 

But I will be looking it up. Just happened to be the exact size I was looking 
for and was a very dense and

hard wood that seemed it would take the everyday use of a shoe horn.

Stay tuned. 




Kind Regards,

 

Timothy J. Ziegler
 On Mon, Jun 12, 2023 at 10:03 PM M.W.Foscue  wrote:

Tim,

 

Very nice - thanks for sharing.

The pics are low res. - so a bit difficult deciding the wood type.  But a 
couple guesses are:

Peruvian Walnut?

Paduk?

Cumaru?

 

Cheers!

Mac

-Original Message-
From: 
Sent: Jun 12, 2023 10:41 PM
To: LOM Group , Tim Ziegler 

Subject: Shoe Horn Handle on the REVO

 

Good evening, 

 

Well I thought it was time to turn something of use again so I had a shoe horn 
kit that has been sitting in my "Kits" drawer long enough. 

So I turned this on my REVO. 

6 start 3/8 pitch spiral. about 9.5 inches long. 

Species, honestly I have to look it up, so stay tuned. No its not cherry 
either. 

Fun little project that will serve me well. 




Kind Regards, 

Timothy J. Ziegler




-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/0e705ce6-c147-a44d-0c46-26eb284b200b%40earthlink.net.
  

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1929954088.1429981.1686719932388%40mail.yahoo.com.

Re: Shoe Horn Handle on the REVO

2023-06-13 Thread M.W.Foscue

Tim,

One more possibility (probability):
Jatoba - AKA "Brazilian Cherry"

Check it out.
Mac
-Original Message-
From: 
Sent: Jun 13, 2023 2:23 PM
To: 
Subject: Re: Shoe Horn Handle on the REVO

Well of them 3 it really looks like this. I just have to remember if I would 
have done a job with that species. 
Kind Regards, 
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
 
320-294-5798 shop
320-630-2243 cell






On Tue, Jun 13, 2023 at 6:13 AM mailto:bulke...@mmnet.com.au)> wrote:
https://www.wood-database.com/cumaru/
https://www.wood-database.com/african-padauk/
https://www.wood-database.com/peruvian-walnut/
 
here you go Tim

From: legacy-ornamental-mills@googlegroups.com 
(mailto:legacy-ornamental-mills@googlegroups.com) 
mailto:legacy-ornamental-mills@googlegroups.com)> On Behalf Of Tim Ziegler
Sent: Tuesday, June 13, 2023 8:51 PM
To: legacy-ornamental-mills@googlegroups.com 
(mailto:legacy-ornamental-mills@googlegroups.com)
Subject: Re: Shoe Horn Handle on the REVO

 
Thanks Mac,
 

I am actually still trying to decide what species it is. I don't recall any of 
those species you mentioned. 

But I will be looking it up. Just happened to be the exact size I was looking 
for and was a very dense and

hard wood that seemed it would take the everyday use of a shoe horn.

Stay tuned. 


Kind Regards,
 

Timothy J. Ziegler

 On Mon, Jun 12, 2023 at 10:03 PM M.W.Foscue mailto:mwfos...@earthlink.net)> wrote:





Tim,
 
Very nice - thanks for sharing.
The pics are low res. - so a bit difficult deciding the wood type.  But a 
couple guesses are:
Peruvian Walnut?
Paduk?
Cumaru?
 
Cheers!
Mac



-Original Message-
From: mailto:legacy-ornamental-mills@googlegroups.com)>
Sent: Jun 12, 2023 10:41 PM
To: LOM Group mailto:legacy-ornamental-mills@googlegroups.com)>, Tim Ziegler 
mailto:timjzieg...@gmail.com)>
Subject: Shoe Horn Handle on the REVO
 
Good evening, 
 

Well I thought it was time to turn something of use again so I had a shoe horn 
kit that has been sitting in my "Kits" drawer long enough. 

So I turned this on my REVO. 

6 start 3/8 pitch spiral. about 9.5 inches long. 

Species, honestly I have to look it up, so stay tuned. No its not cherry 
either. 

Fun little project that will serve me well. 


Kind Regards, 
Timothy J. Ziegler













-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/0e705ce6-c147-a44d-0c46-26eb284b200b%40earthlink.net.

RE: Shoe Horn Handle on the REVO

2023-06-13 Thread bulkeley

Totally, once you go drive motors you will never go back to handing crank again

 

Bill

From: 'Curt George' via Legacy Ornamental Mills 
 
Sent: Wednesday, June 14, 2023 2:36 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Shoe Horn Handle on the REVO

 

Thanks Bill. ;-)

 

It (adding the motors) really makes all the Legacy equipment into a Very 
different machine.

 

C.A.G.

 

On Wednesday, June 14, 2023 at 12:24:41 AM EDT, mailto:bulke...@mmnet.com.au> > wrote: 

 

 

I listen to you curt I have a drive motor and a spindle motor on my revo for 
years now

 

Bill

 

From: 'Curt George' via Legacy Ornamental Mills 
mailto:legacy-ornamental-mills@googlegroups.com> > 
Sent: Wednesday, June 14, 2023 2:00 PM
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com> 
Subject: Re: Shoe Horn Handle on the REVO

 

Drive motor? You mean someone finally listened to me? ;-P

 

Keep up the good work, Tim.

I cant wait to see more of your work. ;-)

 

Have a good night.

 

C.A.G.

 

On Tuesday, June 13, 2023 at 10:43:14 PM EDT, Tim Ziegler 
mailto:timjzieg...@gmail.com> > wrote: 

 

 

Thanks Mike, it was a lot of fun to do too. I am looking forward to doing more 
small items on the 

Revo, since I have a drive motor on it, it really makes it much easier. 




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Tue, Jun 13, 2023 at 9:33 PM Mike Newman mailto:mrnewma...@outlook.com> > wrote:

Very nice.  I like the look of the flute/spiral combo design.

On Tuesday, June 13, 2023 at 1:24:45 PM UTC-5 Tim Ziegler wrote:

Thanks Dan




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

On Tue, Jun 13, 2023 at 8:09 AM cdkr...@gmail.com <mailto:cdkr...@gmail.com>  
mailto:cdkr...@gmail.com> > wrote:

Yes, Tim.  Nicely done!   

DanK

 

On Tuesday, June 13, 2023 at 7:15:11 AM UTC-4 bulk...@mmnet.com.au 
<mailto:bulk...@mmnet.com.au>  wrote:

Me too

 

Bill

 

From: legacy-orna...@googlegroups.com <mailto:legacy-orna...@googlegroups.com>  
mailto:legacy-orna...@googlegroups.com> > On 
Behalf Of Tim Ziegler
Sent: Tuesday, June 13, 2023 8:53 PM
To: legacy-orna...@googlegroups.com <mailto:legacy-orna...@googlegroups.com> 
Subject: Re: Shoe Horn Handle on the REVO

 

thanks Bill, 

yeah wasn't much for mod's used on it. I sure like how it came out. 


Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Tue, Jun 13, 2023 at 12:41 AM mailto:bulk...@mmnet.com.au> > wrote:

Very nice Tim totally proves simple looks great.

Done with your new fine pitch gears no doubt 

 

Bill

 

From: legacy-orna...@googlegroups.com <mailto:legacy-orna...@googlegroups.com>  
mailto:legacy-orna...@googlegroups.com> > On 
Behalf Of Tim Ziegler
Sent: Tuesday, June 13, 2023 12:41 PM
To: LOM Group ; Tim Ziegler 
mailto:timjz...@gmail.com> >
Subject: Shoe Horn Handle on the REVO

 

Good evening,

 

Well I thought it was time to turn something of use again so I had a shoe horn 
kit that has been sitting in my "Kits" drawer long enough. 

So I turned this on my REVO. 

6 start 3/8 pitch spiral. about 9.5 inches long. 

Species, honestly I have to look it up, so stay tuned. No its not cherry 
either. 

Fun little project that will serve me well. 




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental...@googlegroups.com 
<mailto:legacy-ornamental...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEF7e7aPeZ821y%3D0UXcao2essNCwTukQCNsn1MMR_x79w%40mail.gmail.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEF7e7aPeZ821y%3D0UXcao2essNCwTukQCNsn1MMR_x79w%40mail.gmail.com?utm_medium=email&utm_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental...@googlegroups.com 
<mailto:legacy-ornamental...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/003a01d99db9%24ac355ff0%2404a01fd0%24%40mmnet.com.au
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills

Re: Shoe Horn Handle on the REVO

2023-06-13 Thread 'Curt George' via Legacy Ornamental Mills

 Thanks Bill. ;-)
It (adding the motors) really makes all the Legacy equipment into a Very 
different machine.
C.A.G.
On Wednesday, June 14, 2023 at 12:24:41 AM EDT,  
wrote:  
 
 
I listen to you curt I have a drive motor and a spindle motor on my revo for 
years now

  

Bill

  

From: 'Curt George' via Legacy Ornamental Mills 
 
Sent: Wednesday, June 14, 2023 2:00 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Shoe Horn Handle on the REVO

  

Drive motor? You mean someone finally listened to me? ;-P

  

Keep up the good work, Tim.

I cant wait to see more of your work. ;-)

  

Have a good night.

  

C.A.G.

  

On Tuesday, June 13, 2023 at 10:43:14 PM EDT, Tim Ziegler 
 wrote: 

  

  

Thanks Mike, it was a lot of fun to do too. I am looking forward to doing more 
small items on the 

Revo, since I have a drive motor on it, it really makes it much easier. 




Kind Regards,

  

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

  

320-294-5798 shop

320-630-2243 cell

  

  

On Tue, Jun 13, 2023 at 9:33 PM Mike Newman  wrote:


Very nice.  I like the look of the flute/spiral combo design.

On Tuesday, June 13, 2023 at 1:24:45 PM UTC-5 Tim Ziegler wrote:


Thanks Dan




Kind Regards,

  

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

  

320-294-5798 shop

320-630-2243 cell

  

On Tue, Jun 13, 2023 at 8:09 AM cdkr...@gmail.com  wrote:


Yes, Tim.  Nicely done!   

DanK

  

On Tuesday, June 13, 2023 at 7:15:11 AM UTC-4 bulk...@mmnet.com.au wrote:


Me too

 

Bill

 

From: legacy-orna...@googlegroups.com  On 
Behalf Of Tim Ziegler
Sent: Tuesday, June 13, 2023 8:53 PM
To: legacy-orna...@googlegroups.com
Subject: Re: Shoe Horn Handle on the REVO

 

thanks Bill, 

yeah wasn't much for mod's used on it. I sure like how it came out. 


Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Tue, Jun 13, 2023 at 12:41 AM  wrote:


Very nice Tim totally proves simple looks great.

Done with your new fine pitch gears no doubt 

 

Bill

 

From: legacy-orna...@googlegroups.com  On 
Behalf Of Tim Ziegler
Sent: Tuesday, June 13, 2023 12:41 PM
To: LOM Group ; Tim Ziegler 

Subject: Shoe Horn Handle on the REVO

 

Good evening,

 

Well I thought it was time to turn something of use again so I had a shoe horn 
kit that has been sitting in my "Kits" drawer long enough. 

So I turned this on my REVO. 

6 start 3/8 pitch spiral. about 9.5 inches long. 

Species, honestly I have to look it up, so stay tuned. No its not cherry 
either. 

Fun little project that will serve me well. 




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEF7e7aPeZ821y%3D0UXcao2essNCwTukQCNsn1MMR_x79w%40mail.gmail.com.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/003a01d99db9%24ac355ff0%2404a01fd0%24%40mmnet.com.au.


-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental...@googlegroups.com.

To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLH0bObCngZctBA_PAk2ui5itJsaE44xNbWQZgY03eU%2BfQ%40mail.gmail.com.


-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental...@googlegroups.com.



To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/8cc69819-9223-47f5-90ba-0dda6e4d2c68n%40googlegroups.com.



-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/b23bc761-e618-4168-924d-e172300215cen%40googlegroups.com.


-- 
You receiv

RE: Shoe Horn Handle on the REVO

2023-06-13 Thread bulkeley

I listen to you curt I have a drive motor and a spindle motor on my revo for 
years now

 

Bill

 

From: 'Curt George' via Legacy Ornamental Mills 
 
Sent: Wednesday, June 14, 2023 2:00 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Shoe Horn Handle on the REVO

 

Drive motor? You mean someone finally listened to me? ;-P

 

Keep up the good work, Tim.

I cant wait to see more of your work. ;-)

 

Have a good night.

 

C.A.G.

 

On Tuesday, June 13, 2023 at 10:43:14 PM EDT, Tim Ziegler 
mailto:timjzieg...@gmail.com> > wrote: 

 

 

Thanks Mike, it was a lot of fun to do too. I am looking forward to doing more 
small items on the 

Revo, since I have a drive motor on it, it really makes it much easier. 




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Tue, Jun 13, 2023 at 9:33 PM Mike Newman mailto:mrnewma...@outlook.com> > wrote:

Very nice.  I like the look of the flute/spiral combo design.

On Tuesday, June 13, 2023 at 1:24:45 PM UTC-5 Tim Ziegler wrote:

Thanks Dan




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

On Tue, Jun 13, 2023 at 8:09 AM cdkr...@gmail.com <mailto:cdkr...@gmail.com>  
mailto:cdkr...@gmail.com> > wrote:

Yes, Tim.  Nicely done!   

DanK

 

On Tuesday, June 13, 2023 at 7:15:11 AM UTC-4 bulk...@mmnet.com.au 
<mailto:bulk...@mmnet.com.au>  wrote:

Me too

 

Bill

 

From: legacy-orna...@googlegroups.com <mailto:legacy-orna...@googlegroups.com>  
mailto:legacy-orna...@googlegroups.com> > On 
Behalf Of Tim Ziegler
Sent: Tuesday, June 13, 2023 8:53 PM
To: legacy-orna...@googlegroups.com <mailto:legacy-orna...@googlegroups.com> 
Subject: Re: Shoe Horn Handle on the REVO

 

thanks Bill, 

yeah wasn't much for mod's used on it. I sure like how it came out. 


Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Tue, Jun 13, 2023 at 12:41 AM mailto:bulk...@mmnet.com.au> > wrote:

Very nice Tim totally proves simple looks great.

Done with your new fine pitch gears no doubt 

 

Bill

 

From: legacy-orna...@googlegroups.com <mailto:legacy-orna...@googlegroups.com>  
mailto:legacy-orna...@googlegroups.com> > On 
Behalf Of Tim Ziegler
Sent: Tuesday, June 13, 2023 12:41 PM
To: LOM Group mailto:legacy-orna...@googlegroups.com> >; Tim Ziegler mailto:timjz...@gmail.com> >
Subject: Shoe Horn Handle on the REVO

 

Good evening,

 

Well I thought it was time to turn something of use again so I had a shoe horn 
kit that has been sitting in my "Kits" drawer long enough. 

So I turned this on my REVO. 

6 start 3/8 pitch spiral. about 9.5 inches long. 

Species, honestly I have to look it up, so stay tuned. No its not cherry 
either. 

Fun little project that will serve me well. 




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental...@googlegroups.com 
<mailto:legacy-ornamental...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEF7e7aPeZ821y%3D0UXcao2essNCwTukQCNsn1MMR_x79w%40mail.gmail.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEF7e7aPeZ821y%3D0UXcao2essNCwTukQCNsn1MMR_x79w%40mail.gmail.com?utm_medium=email&utm_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental...@googlegroups.com 
<mailto:legacy-ornamental...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/003a01d99db9%24ac355ff0%2404a01fd0%24%40mmnet.com.au
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/003a01d99db9%24ac355ff0%2404a01fd0%24%40mmnet.com.au?utm_medium=email&utm_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental...@googlegroups.com 
<mailto:legacy-ornamental...@googlegroups.com> .

To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLH0bObCngZctBA_PAk2ui5itJsaE44xNbWQZgY03eU%2BfQ%40mail.gmail.com
 
<htt

RE: Shoe Horn Handle on the REVO

2023-06-13 Thread bulkeley

Like I always say great mill the revo 

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Wednesday, June 14, 2023 12:43 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Shoe Horn Handle on the REVO

 

Thanks Mike, it was a lot of fun to do too. I am looking forward to doing more 
small items on the 

Revo, since I have a drive motor on it, it really makes it much easier. 




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Tue, Jun 13, 2023 at 9:33 PM Mike Newman mailto:mrnewma...@outlook.com> > wrote:

Very nice.  I like the look of the flute/spiral combo design.

On Tuesday, June 13, 2023 at 1:24:45 PM UTC-5 Tim Ziegler wrote:

Thanks Dan




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798   shop

320-630-2243   cell

 

On Tue, Jun 13, 2023 at 8:09 AM cdkr...@gmail.com <mailto:cdkr...@gmail.com>  
mailto:cdkr...@gmail.com> > wrote:

Yes, Tim.  Nicely done!   

DanK

 

On Tuesday, June 13, 2023 at 7:15:11 AM UTC-4 bulk...@mmnet.com.au 
<mailto:bulk...@mmnet.com.au>  wrote:

Me too

 

Bill

 

From: legacy-orna...@googlegroups.com <mailto:legacy-orna...@googlegroups.com>  
mailto:legacy-orna...@googlegroups.com> > On 
Behalf Of Tim Ziegler
Sent: Tuesday, June 13, 2023 8:53 PM
To: legacy-orna...@googlegroups.com <mailto:legacy-orna...@googlegroups.com> 
Subject: Re: Shoe Horn Handle on the REVO

 

thanks Bill, 

yeah wasn't much for mod's used on it. I sure like how it came out. 


Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798   shop

320-630-2243   cell

 

 

On Tue, Jun 13, 2023 at 12:41 AM mailto:bulk...@mmnet.com.au> > wrote:

Very nice Tim totally proves simple looks great.

Done with your new fine pitch gears no doubt 

 

Bill

 

From: legacy-orna...@googlegroups.com <mailto:legacy-orna...@googlegroups.com>  
mailto:legacy-orna...@googlegroups.com> > On 
Behalf Of Tim Ziegler
Sent: Tuesday, June 13, 2023 12:41 PM
To: LOM Group mailto:legacy-orna...@googlegroups.com> >; Tim Ziegler mailto:timjz...@gmail.com> >
Subject: Shoe Horn Handle on the REVO

 

Good evening,

 

Well I thought it was time to turn something of use again so I had a shoe horn 
kit that has been sitting in my "Kits" drawer long enough. 

So I turned this on my REVO. 

6 start 3/8 pitch spiral. about 9.5 inches long. 

Species, honestly I have to look it up, so stay tuned. No its not cherry 
either. 

Fun little project that will serve me well. 




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798   shop

320-630-2243   cell

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental...@googlegroups.com 
<mailto:legacy-ornamental...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEF7e7aPeZ821y%3D0UXcao2essNCwTukQCNsn1MMR_x79w%40mail.gmail.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEF7e7aPeZ821y%3D0UXcao2essNCwTukQCNsn1MMR_x79w%40mail.gmail.com?utm_medium=email&utm_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental...@googlegroups.com 
<mailto:legacy-ornamental...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/003a01d99db9%24ac355ff0%2404a01fd0%24%40mmnet.com.au
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/003a01d99db9%24ac355ff0%2404a01fd0%24%40mmnet.com.au?utm_medium=email&utm_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental...@googlegroups.com 
<mailto:legacy-ornamental...@googlegroups.com> .

To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLH0bObCngZctBA_PAk2ui5itJsaE44xNbWQZgY03eU%2BfQ%40mail.gmail.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLH0bObCngZctBA_PAk2ui5itJsaE44xNbWQZgY03eU%2BfQ%40mail.gmail.com?utm_medium=email&utm_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscr

Re: Shoe Horn Handle on the REVO

2023-06-13 Thread 'Curt George' via Legacy Ornamental Mills

 Drive motor? You mean someone finally listened to me? ;-P
Keep up the good work, Tim.I cant wait to see more of your work. ;-)
Have a good night.
C.A.G.
On Tuesday, June 13, 2023 at 10:43:14 PM EDT, Tim Ziegler 
 wrote:  
 
 Thanks Mike, it was a lot of fun to do too. I am looking forward to doing more 
small items on the Revo, since I have a drive motor on it, it really makes it 
much easier. 
Kind Regards,
Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330
320-294-5798 shop320-630-2243 cell

On Tue, Jun 13, 2023 at 9:33 PM Mike Newman  wrote:

Very nice.  I like the look of the flute/spiral combo design.

On Tuesday, June 13, 2023 at 1:24:45 PM UTC-5 Tim Ziegler wrote:

Thanks Dan
Kind Regards,
Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330
320-294-5798 shop320-630-2243 cell
On Tue, Jun 13, 2023 at 8:09 AM cdkr...@gmail.com  wrote:

Yes, Tim.  Nicely done!   
DanK

On Tuesday, June 13, 2023 at 7:15:11 AM UTC-4 bulk...@mmnet.com.au wrote:


Me too

 

Bill

 

From: legacy-orna...@googlegroups.com  On 
Behalf Of Tim Ziegler
Sent: Tuesday, June 13, 2023 8:53 PM
To: legacy-orna...@googlegroups.com
Subject: Re: Shoe Horn Handle on the REVO

 

thanks Bill, 

yeah wasn't much for mod's used on it. I sure like how it came out. 


Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Tue, Jun 13, 2023 at 12:41 AM  wrote:


Very nice Tim totally proves simple looks great.

Done with your new fine pitch gears no doubt 

 

Bill

 

From: legacy-orna...@googlegroups.com  On 
Behalf Of Tim Ziegler
Sent: Tuesday, June 13, 2023 12:41 PM
To: LOM Group ; Tim Ziegler 

Subject: Shoe Horn Handle on the REVO

 

Good evening,

 

Well I thought it was time to turn something of use again so I had a shoe horn 
kit that has been sitting in my "Kits" drawer long enough. 

So I turned this on my REVO. 

6 start 3/8 pitch spiral. about 9.5 inches long. 

Species, honestly I have to look it up, so stay tuned. No its not cherry 
either. 

Fun little project that will serve me well. 




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEF7e7aPeZ821y%3D0UXcao2essNCwTukQCNsn1MMR_x79w%40mail.gmail.com.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/003a01d99db9%24ac355ff0%2404a01fd0%24%40mmnet.com.au.


-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental...@googlegroups.com.


To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLH0bObCngZctBA_PAk2ui5itJsaE44xNbWQZgY03eU%2BfQ%40mail.gmail.com.



-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental...@googlegroups.com.


To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/8cc69819-9223-47f5-90ba-0dda6e4d2c68n%40googlegroups.com.




-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/b23bc761-e618-4168-924d-e172300215cen%40googlegroups.com.



-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLF5Dr4xa8JpMWdQ_noV002-oinYOOO4-BwYQNgB0f0__g%40mail.gmail.com.
  

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubsc

Re: Shoe Horn Handle on the REVO

2023-06-13 Thread Tim Ziegler

Thanks Mike, it was a lot of fun to do too. I am looking forward to doing
more small items on the
Revo, since I have a drive motor on it, it really makes it much easier.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Tue, Jun 13, 2023 at 9:33 PM Mike Newman  wrote:

> Very nice.  I like the look of the flute/spiral combo design.
>
> On Tuesday, June 13, 2023 at 1:24:45 PM UTC-5 Tim Ziegler wrote:
>
>> Thanks Dan
>>
>> Kind Regards,
>>
>> Timothy J. Ziegler
>> Ziegler WoodWork & Specialty
>> 14171 160th Ave.
>> Foreston MN 56330
>>
>> 320-294-5798 <(320)%20294-5798> shop
>> 320-630-2243 <(320)%20630-2243> cell
>>
>> On Tue, Jun 13, 2023 at 8:09 AM cdkr...@gmail.com 
>> wrote:
>>
>>> Yes, Tim.  Nicely done!
>>> DanK
>>>
>>> On Tuesday, June 13, 2023 at 7:15:11 AM UTC-4 bulk...@mmnet.com.au
>>> wrote:
>>>
>>>> Me too
>>>>
>>>>
>>>>
>>>> Bill
>>>>
>>>>
>>>>
>>>> *From:* legacy-orna...@googlegroups.com <
>>>> legacy-orna...@googlegroups.com> *On Behalf Of *Tim Ziegler
>>>> *Sent:* Tuesday, June 13, 2023 8:53 PM
>>>> *To:* legacy-orna...@googlegroups.com
>>>> *Subject:* Re: Shoe Horn Handle on the REVO
>>>>
>>>>
>>>>
>>>> thanks Bill,
>>>>
>>>> yeah wasn't much for mod's used on it. I sure like how it came out.
>>>>
>>>> Kind Regards,
>>>>
>>>>
>>>>
>>>> Timothy J. Ziegler
>>>>
>>>> Ziegler WoodWork & Specialty
>>>>
>>>> 14171 160th Ave.
>>>>
>>>> Foreston MN 56330
>>>>
>>>>
>>>>
>>>> 320-294-5798 <(320)%20294-5798> shop
>>>>
>>>> 320-630-2243 <(320)%20630-2243> cell
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> On Tue, Jun 13, 2023 at 12:41 AM  wrote:
>>>>
>>>> Very nice Tim totally proves simple looks great.
>>>>
>>>> Done with your new fine pitch gears no doubt
>>>>
>>>>
>>>>
>>>> Bill
>>>>
>>>>
>>>>
>>>> *From:* legacy-orna...@googlegroups.com <
>>>> legacy-orna...@googlegroups.com> *On Behalf Of *Tim Ziegler
>>>> *Sent:* Tuesday, June 13, 2023 12:41 PM
>>>> *To:* LOM Group ; Tim Ziegler <
>>>> timjz...@gmail.com>
>>>> *Subject:* Shoe Horn Handle on the REVO
>>>>
>>>>
>>>>
>>>> Good evening,
>>>>
>>>>
>>>>
>>>> Well I thought it was time to turn something of use again so I had a
>>>> shoe horn kit that has been sitting in my "Kits" drawer long enough.
>>>>
>>>> So I turned this on my REVO.
>>>>
>>>> 6 start 3/8 pitch spiral. about 9.5 inches long.
>>>>
>>>> Species, honestly I have to look it up, so stay tuned. No its not
>>>> cherry either.
>>>>
>>>> Fun little project that will serve me well.
>>>>
>>>>
>>>> Kind Regards,
>>>>
>>>>
>>>>
>>>> Timothy J. Ziegler
>>>>
>>>> Ziegler WoodWork & Specialty
>>>>
>>>> 14171 160th Ave.
>>>>
>>>> Foreston MN 56330
>>>>
>>>>
>>>>
>>>> 320-294-5798 <(320)%20294-5798> shop
>>>>
>>>> 320-630-2243 <(320)%20630-2243> cell
>>>>
>>>> --
>>>> You received this message because you are subscribed to the Google
>>>> Groups "Legacy Ornamental Mills" group.
>>>> To unsubscribe from this group and stop receiving emails from it, send
>>>> an email to legacy-ornamental...@googlegroups.com.
>>>> To view this discussion on the web visit
>>>> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEF7e7aPeZ821y%3D0UXcao2essNCwTukQCNsn1MMR_x79w%40mail.gmail.com
>>>> <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEF7e7aPeZ821y%3D0UXcao2essNCwTukQCNsn1MMR_x79w%40mail.gmail.com?utm_medium=email&utm_source=footer>
>>>> .
>>>>
>>>> --
>>

Re: Shoe Horn Handle on the REVO

2023-06-13 Thread Mike Newman

Very nice.  I like the look of the flute/spiral combo design.

On Tuesday, June 13, 2023 at 1:24:45 PM UTC-5 Tim Ziegler wrote:

> Thanks Dan
>
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> Foreston MN 56330
>
> 320-294-5798 <(320)%20294-5798> shop
> 320-630-2243 <(320)%20630-2243> cell
>
> On Tue, Jun 13, 2023 at 8:09 AM cdkr...@gmail.com  
> wrote:
>
>> Yes, Tim.  Nicely done!   
>> DanK
>>
>> On Tuesday, June 13, 2023 at 7:15:11 AM UTC-4 bulk...@mmnet.com.au wrote:
>>
>>> Me too
>>>
>>>  
>>>
>>> Bill
>>>
>>>  
>>>
>>> *From:* legacy-orna...@googlegroups.com  
>>> *On Behalf Of *Tim Ziegler
>>> *Sent:* Tuesday, June 13, 2023 8:53 PM
>>> *To:* legacy-orna...@googlegroups.com
>>> *Subject:* Re: Shoe Horn Handle on the REVO
>>>
>>>  
>>>
>>> thanks Bill, 
>>>
>>> yeah wasn't much for mod's used on it. I sure like how it came out. 
>>>
>>> Kind Regards,
>>>
>>>  
>>>
>>> Timothy J. Ziegler
>>>
>>> Ziegler WoodWork & Specialty
>>>
>>> 14171 160th Ave.
>>>
>>> Foreston MN 56330
>>>
>>>  
>>>
>>> 320-294-5798 <(320)%20294-5798> shop
>>>
>>> 320-630-2243 <(320)%20630-2243> cell
>>>
>>>  
>>>
>>>  
>>>
>>> On Tue, Jun 13, 2023 at 12:41 AM  wrote:
>>>
>>> Very nice Tim totally proves simple looks great.
>>>
>>> Done with your new fine pitch gears no doubt 
>>>
>>>  
>>>
>>> Bill
>>>
>>>  
>>>
>>> *From:* legacy-orna...@googlegroups.com  
>>> *On Behalf Of *Tim Ziegler
>>> *Sent:* Tuesday, June 13, 2023 12:41 PM
>>> *To:* LOM Group ; Tim Ziegler <
>>> timjz...@gmail.com>
>>> *Subject:* Shoe Horn Handle on the REVO
>>>
>>>  
>>>
>>> Good evening,
>>>
>>>  
>>>
>>> Well I thought it was time to turn something of use again so I had a 
>>> shoe horn kit that has been sitting in my "Kits" drawer long enough. 
>>>
>>> So I turned this on my REVO. 
>>>
>>> 6 start 3/8 pitch spiral. about 9.5 inches long. 
>>>
>>> Species, honestly I have to look it up, so stay tuned. No its not cherry 
>>> either. 
>>>
>>> Fun little project that will serve me well. 
>>>
>>>
>>> Kind Regards,
>>>
>>>  
>>>
>>> Timothy J. Ziegler
>>>
>>> Ziegler WoodWork & Specialty
>>>
>>> 14171 160th Ave.
>>>
>>> Foreston MN 56330
>>>
>>>  
>>>
>>> 320-294-5798 <(320)%20294-5798> shop
>>>
>>> 320-630-2243 <(320)%20630-2243> cell
>>>
>>> -- 
>>> You received this message because you are subscribed to the Google 
>>> Groups "Legacy Ornamental Mills" group.
>>> To unsubscribe from this group and stop receiving emails from it, send 
>>> an email to legacy-ornamental...@googlegroups.com.
>>> To view this discussion on the web visit 
>>> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEF7e7aPeZ821y%3D0UXcao2essNCwTukQCNsn1MMR_x79w%40mail.gmail.com
>>>  
>>> <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEF7e7aPeZ821y%3D0UXcao2essNCwTukQCNsn1MMR_x79w%40mail.gmail.com?utm_medium=email&utm_source=footer>
>>> .
>>>
>>> -- 
>>> You received this message because you are subscribed to the Google 
>>> Groups "Legacy Ornamental Mills" group.
>>> To unsubscribe from this group and stop receiving emails from it, send 
>>> an email to legacy-ornamental...@googlegroups.com.
>>> To view this discussion on the web visit 
>>> https://groups.google.com/d/msgid/legacy-ornamental-mills/003a01d99db9%24ac355ff0%2404a01fd0%24%40mmnet.com.au
>>>  
>>> <https://groups.google.com/d/msgid/legacy-ornamental-mills/003a01d99db9%24ac355ff0%2404a01fd0%24%40mmnet.com.au?utm_medium=email&utm_source=footer>
>>> .
>>>
>>> -- 
>>> You received this message because you are subscribed to the Google 
>>> Groups "Legacy Ornamental Mills" group.
>>> To unsubscribe from this group and stop receiving emails from it

Re: Shoe Horn Handle on the REVO

2023-06-13 Thread Tim Ziegler

Thanks Dan
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Tue, Jun 13, 2023 at 8:09 AM cdkr...@gmail.com 
wrote:

> Yes, Tim.  Nicely done!
> DanK
>
> On Tuesday, June 13, 2023 at 7:15:11 AM UTC-4 bulk...@mmnet.com.au wrote:
>
>> Me too
>>
>>
>>
>> Bill
>>
>>
>>
>> *From:* legacy-orna...@googlegroups.com 
>> *On Behalf Of *Tim Ziegler
>> *Sent:* Tuesday, June 13, 2023 8:53 PM
>> *To:* legacy-orna...@googlegroups.com
>> *Subject:* Re: Shoe Horn Handle on the REVO
>>
>>
>>
>> thanks Bill,
>>
>> yeah wasn't much for mod's used on it. I sure like how it came out.
>>
>> Kind Regards,
>>
>>
>>
>> Timothy J. Ziegler
>>
>> Ziegler WoodWork & Specialty
>>
>> 14171 160th Ave.
>>
>> Foreston MN 56330
>>
>>
>>
>> 320-294-5798 <(320)%20294-5798> shop
>>
>> 320-630-2243 <(320)%20630-2243> cell
>>
>>
>>
>>
>>
>> On Tue, Jun 13, 2023 at 12:41 AM  wrote:
>>
>> Very nice Tim totally proves simple looks great.
>>
>> Done with your new fine pitch gears no doubt
>>
>>
>>
>> Bill
>>
>>
>>
>> *From:* legacy-orna...@googlegroups.com 
>> *On Behalf Of *Tim Ziegler
>> *Sent:* Tuesday, June 13, 2023 12:41 PM
>> *To:* LOM Group ; Tim Ziegler <
>> timjz...@gmail.com>
>> *Subject:* Shoe Horn Handle on the REVO
>>
>>
>>
>> Good evening,
>>
>>
>>
>> Well I thought it was time to turn something of use again so I had a shoe
>> horn kit that has been sitting in my "Kits" drawer long enough.
>>
>> So I turned this on my REVO.
>>
>> 6 start 3/8 pitch spiral. about 9.5 inches long.
>>
>> Species, honestly I have to look it up, so stay tuned. No its not cherry
>> either.
>>
>> Fun little project that will serve me well.
>>
>>
>> Kind Regards,
>>
>>
>>
>> Timothy J. Ziegler
>>
>> Ziegler WoodWork & Specialty
>>
>> 14171 160th Ave.
>>
>> Foreston MN 56330
>>
>>
>>
>> 320-294-5798 <(320)%20294-5798> shop
>>
>> 320-630-2243 <(320)%20630-2243> cell
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to legacy-ornamental...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEF7e7aPeZ821y%3D0UXcao2essNCwTukQCNsn1MMR_x79w%40mail.gmail.com
>> <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEF7e7aPeZ821y%3D0UXcao2essNCwTukQCNsn1MMR_x79w%40mail.gmail.com?utm_medium=email&utm_source=footer>
>> .
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to legacy-ornamental...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/legacy-ornamental-mills/003a01d99db9%24ac355ff0%2404a01fd0%24%40mmnet.com.au
>> <https://groups.google.com/d/msgid/legacy-ornamental-mills/003a01d99db9%24ac355ff0%2404a01fd0%24%40mmnet.com.au?utm_medium=email&utm_source=footer>
>> .
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to legacy-ornamental...@googlegroups.com.
>>
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLH0bObCngZctBA_PAk2ui5itJsaE44xNbWQZgY03eU%2BfQ%40mail.gmail.com
>> <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLH0bObCngZctBA_PAk2ui5itJsaE44xNbWQZgY03eU%2BfQ%40mail.gmail.com?utm_medium=email&utm_source=footer>
>> .
>>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/8cc69819-9223-47f5-90ba-0dda6e4d2c68n%40googlegroups.com
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/8cc69819-9223-47f5-90ba-0dda6e4d2c68n%40googlegroups.com?utm_medium=email&utm_source=footer>
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHy3UYNHuyQ%3D9E9d%3D2_1xY8M24QN0SAN7-5m9Dd0LjCeg%40mail.gmail.com.

Re: Shoe Horn Handle on the REVO

2023-06-13 Thread Tim Ziegler

thx
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Tue, Jun 13, 2023 at 6:15 AM  wrote:

> Me too
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Tuesday, June 13, 2023 8:53 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Shoe Horn Handle on the REVO
>
>
>
> thanks Bill,
>
> yeah wasn't much for mod's used on it. I sure like how it came out.
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Tue, Jun 13, 2023 at 12:41 AM  wrote:
>
> Very nice Tim totally proves simple looks great.
>
> Done with your new fine pitch gears no doubt
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Tuesday, June 13, 2023 12:41 PM
> *To:* LOM Group ; Tim Ziegler <
> timjzieg...@gmail.com>
> *Subject:* Shoe Horn Handle on the REVO
>
>
>
> Good evening,
>
>
>
> Well I thought it was time to turn something of use again so I had a shoe
> horn kit that has been sitting in my "Kits" drawer long enough.
>
> So I turned this on my REVO.
>
> 6 start 3/8 pitch spiral. about 9.5 inches long.
>
> Species, honestly I have to look it up, so stay tuned. No its not cherry
> either.
>
> Fun little project that will serve me well.
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEF7e7aPeZ821y%3D0UXcao2essNCwTukQCNsn1MMR_x79w%40mail.gmail.com
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEF7e7aPeZ821y%3D0UXcao2essNCwTukQCNsn1MMR_x79w%40mail.gmail.com?utm_medium=email&utm_source=footer>
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/003a01d99db9%24ac355ff0%2404a01fd0%24%40mmnet.com.au
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/003a01d99db9%24ac355ff0%2404a01fd0%24%40mmnet.com.au?utm_medium=email&utm_source=footer>
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLH0bObCngZctBA_PAk2ui5itJsaE44xNbWQZgY03eU%2BfQ%40mail.gmail.com
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLH0bObCngZctBA_PAk2ui5itJsaE44xNbWQZgY03eU%2BfQ%40mail.gmail.com?utm_medium=email&utm_source=footer>
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/000d01d99de8%243afa3570%24b0eea050%24%40mmnet.com.au
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/000d01d99de8%243afa3570%24b0eea050%24%40mmnet.com.au?utm_medium=email&utm_source=footer>
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFQFf%3DaoWg5d2GWfEpaoGBRHZWhoMUG0%3DzOweWh9eg2kg%40mail.gmail.com.

Re: Shoe Horn Handle on the REVO

2023-06-13 Thread Tim Ziegler

Well of them 3 it really looks like this.
I just have to remember if I would have done a job with that species.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Tue, Jun 13, 2023 at 6:13 AM  wrote:

> https://www.wood-database.com/cumaru/
>
> https://www.wood-database.com/african-padauk/
>
> https://www.wood-database.com/peruvian-walnut/
>
>
>
> here you go Tim
>
>
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Tuesday, June 13, 2023 8:51 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Shoe Horn Handle on the REVO
>
>
>
> Thanks Mac,
>
>
>
> I am actually still trying to decide what species it is. I don't recall
> any of those species you mentioned.
>
> But I will be looking it up. Just happened to be the exact size I was
> looking for and was a very dense and
>
> hard wood that seemed it would take the everyday use of a shoe horn.
>
> Stay tuned.
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Mon, Jun 12, 2023 at 10:03 PM M.W.Foscue 
> wrote:
>
> Tim,
>
>
>
> Very nice - thanks for sharing.
>
> The pics are low res. - so a bit difficult deciding the wood type.  But a
> couple guesses are:
>
> Peruvian Walnut?
>
> Paduk?
>
> Cumaru?
>
>
>
> Cheers!
>
> Mac
> --
> --
>
> -Original Message-
> From: 
> Sent: Jun 12, 2023 10:41 PM
> To: LOM Group , Tim Ziegler <
> timjzieg...@gmail.com>
> Subject: Shoe Horn Handle on the REVO
>
>
>
> Good evening,
>
>
>
> Well I thought it was time to turn something of use again so I had a shoe
> horn kit that has been sitting in my "Kits" drawer long enough.
>
> So I turned this on my REVO.
>
> 6 start 3/8 pitch spiral. about 9.5 inches long.
>
> Species, honestly I have to look it up, so stay tuned. No its not cherry
> either.
>
> Fun little project that will serve me well.
>
>
> Kind Regards,
>
> Timothy J. Ziegler
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/4292e417-46f0-3495-cf82-fbab363c635b%40earthlink.net
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/4292e417-46f0-3495-cf82-fbab363c635b%40earthlink.net?utm_medium=email&utm_source=footer>
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEJPrDwXPVUdpob-WjXX5d0xdP%3DuBdskabH4A44DmFXvA%40mail.gmail.com
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEJPrDwXPVUdpob-WjXX5d0xdP%3DuBdskabH4A44DmFXvA%40mail.gmail.com?utm_medium=email&utm_source=footer>
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/000801d99de8%240ce57c80%2426b07580%24%40mmnet.com.au
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/000801d99de8%240ce57c80%2426b07580%24%40mmnet.com.au?utm_medium=email&utm_source=footer>
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFHiZj94XuhWkdQcExJ3pcXK7o0rxiq_UgQ1Zh9fGopRA%40mail.gmail.com.

Re: Shoe Horn Handle on the REVO

2023-06-13 Thread Tim Ziegler

Thanks Bill
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Tue, Jun 13, 2023 at 6:13 AM  wrote:

> https://www.wood-database.com/cumaru/
>
> https://www.wood-database.com/african-padauk/
>
> https://www.wood-database.com/peruvian-walnut/
>
>
>
> here you go Tim
>
>
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Tuesday, June 13, 2023 8:51 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Shoe Horn Handle on the REVO
>
>
>
> Thanks Mac,
>
>
>
> I am actually still trying to decide what species it is. I don't recall
> any of those species you mentioned.
>
> But I will be looking it up. Just happened to be the exact size I was
> looking for and was a very dense and
>
> hard wood that seemed it would take the everyday use of a shoe horn.
>
> Stay tuned.
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Mon, Jun 12, 2023 at 10:03 PM M.W.Foscue 
> wrote:
>
> Tim,
>
>
>
> Very nice - thanks for sharing.
>
> The pics are low res. - so a bit difficult deciding the wood type.  But a
> couple guesses are:
>
> Peruvian Walnut?
>
> Paduk?
>
> Cumaru?
>
>
>
> Cheers!
>
> Mac
> --
> --
>
> -Original Message-
> From: 
> Sent: Jun 12, 2023 10:41 PM
> To: LOM Group , Tim Ziegler <
> timjzieg...@gmail.com>
> Subject: Shoe Horn Handle on the REVO
>
>
>
> Good evening,
>
>
>
> Well I thought it was time to turn something of use again so I had a shoe
> horn kit that has been sitting in my "Kits" drawer long enough.
>
> So I turned this on my REVO.
>
> 6 start 3/8 pitch spiral. about 9.5 inches long.
>
> Species, honestly I have to look it up, so stay tuned. No its not cherry
> either.
>
> Fun little project that will serve me well.
>
>
> Kind Regards,
>
> Timothy J. Ziegler
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/4292e417-46f0-3495-cf82-fbab363c635b%40earthlink.net
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/4292e417-46f0-3495-cf82-fbab363c635b%40earthlink.net?utm_medium=email&utm_source=footer>
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEJPrDwXPVUdpob-WjXX5d0xdP%3DuBdskabH4A44DmFXvA%40mail.gmail.com
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEJPrDwXPVUdpob-WjXX5d0xdP%3DuBdskabH4A44DmFXvA%40mail.gmail.com?utm_medium=email&utm_source=footer>
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/000801d99de8%240ce57c80%2426b07580%24%40mmnet.com.au
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/000801d99de8%240ce57c80%2426b07580%24%40mmnet.com.au?utm_medium=email&utm_source=footer>
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFnZpKH0qrcwXjP_BChy7A3%3D4J0mV1YSxjs%3DwZd7E3n0A%40mail.gmail.com.

Re: Shoe Horn Handle on the REVO

2023-06-13 Thread cdkr...@gmail.com

Yes, Tim.  Nicely done!   
DanK

On Tuesday, June 13, 2023 at 7:15:11 AM UTC-4 bulk...@mmnet.com.au wrote:

> Me too
>
>  
>
> Bill
>
>  
>
> *From:* legacy-orna...@googlegroups.com  *On 
> Behalf Of *Tim Ziegler
> *Sent:* Tuesday, June 13, 2023 8:53 PM
> *To:* legacy-orna...@googlegroups.com
> *Subject:* Re: Shoe Horn Handle on the REVO
>
>  
>
> thanks Bill, 
>
> yeah wasn't much for mod's used on it. I sure like how it came out. 
>
> Kind Regards,
>
>  
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>  
>
> 320-294-5798 <(320)%20294-5798> shop
>
> 320-630-2243 <(320)%20630-2243> cell
>
>  
>
>  
>
> On Tue, Jun 13, 2023 at 12:41 AM  wrote:
>
> Very nice Tim totally proves simple looks great.
>
> Done with your new fine pitch gears no doubt 
>
>  
>
> Bill
>
>  
>
> *From:* legacy-orna...@googlegroups.com  *On 
> Behalf Of *Tim Ziegler
> *Sent:* Tuesday, June 13, 2023 12:41 PM
> *To:* LOM Group ; Tim Ziegler <
> timjz...@gmail.com>
> *Subject:* Shoe Horn Handle on the REVO
>
>  
>
> Good evening,
>
>  
>
> Well I thought it was time to turn something of use again so I had a shoe 
> horn kit that has been sitting in my "Kits" drawer long enough. 
>
> So I turned this on my REVO. 
>
> 6 start 3/8 pitch spiral. about 9.5 inches long. 
>
> Species, honestly I have to look it up, so stay tuned. No its not cherry 
> either. 
>
> Fun little project that will serve me well. 
>
>
> Kind Regards,
>
>  
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>  
>
> 320-294-5798 <(320)%20294-5798> shop
>
> 320-630-2243 <(320)%20630-2243> cell
>
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to legacy-ornamental...@googlegroups.com.
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEF7e7aPeZ821y%3D0UXcao2essNCwTukQCNsn1MMR_x79w%40mail.gmail.com
>  
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEF7e7aPeZ821y%3D0UXcao2essNCwTukQCNsn1MMR_x79w%40mail.gmail.com?utm_medium=email&utm_source=footer>
> .
>
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to legacy-ornamental...@googlegroups.com.
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/legacy-ornamental-mills/003a01d99db9%24ac355ff0%2404a01fd0%24%40mmnet.com.au
>  
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/003a01d99db9%24ac355ff0%2404a01fd0%24%40mmnet.com.au?utm_medium=email&utm_source=footer>
> .
>
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to legacy-ornamental...@googlegroups.com.
>
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLH0bObCngZctBA_PAk2ui5itJsaE44xNbWQZgY03eU%2BfQ%40mail.gmail.com
>  
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLH0bObCngZctBA_PAk2ui5itJsaE44xNbWQZgY03eU%2BfQ%40mail.gmail.com?utm_medium=email&utm_source=footer>
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/8cc69819-9223-47f5-90ba-0dda6e4d2c68n%40googlegroups.com.

RE: Shoe Horn Handle on the REVO

2023-06-13 Thread bulkeley

Me too

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Tuesday, June 13, 2023 8:53 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Shoe Horn Handle on the REVO

 

thanks Bill, 

yeah wasn't much for mod's used on it. I sure like how it came out. 


Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Tue, Jun 13, 2023 at 12:41 AM mailto:bulke...@mmnet.com.au> > wrote:

Very nice Tim totally proves simple looks great.

Done with your new fine pitch gears no doubt 

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Tim Ziegler
Sent: Tuesday, June 13, 2023 12:41 PM
To: LOM Group mailto:legacy-ornamental-mills@googlegroups.com> >; Tim Ziegler 
mailto:timjzieg...@gmail.com> >
Subject: Shoe Horn Handle on the REVO

 

Good evening,

 

Well I thought it was time to turn something of use again so I had a shoe horn 
kit that has been sitting in my "Kits" drawer long enough. 

So I turned this on my REVO. 

6 start 3/8 pitch spiral. about 9.5 inches long. 

Species, honestly I have to look it up, so stay tuned. No its not cherry 
either. 

Fun little project that will serve me well. 




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEF7e7aPeZ821y%3D0UXcao2essNCwTukQCNsn1MMR_x79w%40mail.gmail.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEF7e7aPeZ821y%3D0UXcao2essNCwTukQCNsn1MMR_x79w%40mail.gmail.com?utm_medium=email&utm_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/003a01d99db9%24ac355ff0%2404a01fd0%24%40mmnet.com.au
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/003a01d99db9%24ac355ff0%2404a01fd0%24%40mmnet.com.au?utm_medium=email&utm_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLH0bObCngZctBA_PAk2ui5itJsaE44xNbWQZgY03eU%2BfQ%40mail.gmail.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLH0bObCngZctBA_PAk2ui5itJsaE44xNbWQZgY03eU%2BfQ%40mail.gmail.com?utm_medium=email&utm_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000d01d99de8%243afa3570%24b0eea050%24%40mmnet.com.au.

RE: Shoe Horn Handle on the REVO

2023-06-13 Thread bulkeley

https://www.wood-database.com/cumaru/

https://www.wood-database.com/african-padauk/

https://www.wood-database.com/peruvian-walnut/

 

here you go Tim

 

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Tuesday, June 13, 2023 8:51 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Shoe Horn Handle on the REVO

 

Thanks Mac,

 

I am actually still trying to decide what species it is. I don't recall any of 
those species you mentioned. 

But I will be looking it up. Just happened to be the exact size I was looking 
for and was a very dense and

hard wood that seemed it would take the everyday use of a shoe horn.

Stay tuned. 




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Mon, Jun 12, 2023 at 10:03 PM M.W.Foscue mailto:mwfos...@earthlink.net> > wrote:

Tim,

 

Very nice - thanks for sharing.

The pics are low res. - so a bit difficult deciding the wood type.  But a 
couple guesses are:

Peruvian Walnut?

Paduk?

Cumaru?

 

Cheers!

Mac


  _  


  _  


-Original Message-
From: mailto:legacy-ornamental-mills@googlegroups.com> >
Sent: Jun 12, 2023 10:41 PM
To: LOM Group mailto:legacy-ornamental-mills@googlegroups.com> >, Tim Ziegler 
mailto:timjzieg...@gmail.com> >
Subject: Shoe Horn Handle on the REVO

 

Good evening, 

 

Well I thought it was time to turn something of use again so I had a shoe horn 
kit that has been sitting in my "Kits" drawer long enough. 

So I turned this on my REVO. 

6 start 3/8 pitch spiral. about 9.5 inches long. 

Species, honestly I have to look it up, so stay tuned. No its not cherry 
either. 

Fun little project that will serve me well. 




Kind Regards, 

Timothy J. Ziegler

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/4292e417-46f0-3495-cf82-fbab363c635b%40earthlink.net
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/4292e417-46f0-3495-cf82-fbab363c635b%40earthlink.net?utm_medium=email&utm_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEJPrDwXPVUdpob-WjXX5d0xdP%3DuBdskabH4A44DmFXvA%40mail.gmail.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEJPrDwXPVUdpob-WjXX5d0xdP%3DuBdskabH4A44DmFXvA%40mail.gmail.com?utm_medium=email&utm_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000801d99de8%240ce57c80%2426b07580%24%40mmnet.com.au.

Re: Shoe Horn Handle on the REVO

2023-06-13 Thread Tim Ziegler

thanks Bill,
yeah wasn't much for mod's used on it. I sure like how it came out.
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Tue, Jun 13, 2023 at 12:41 AM  wrote:

> Very nice Tim totally proves simple looks great.
>
> Done with your new fine pitch gears no doubt
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Tuesday, June 13, 2023 12:41 PM
> *To:* LOM Group ; Tim Ziegler <
> timjzieg...@gmail.com>
> *Subject:* Shoe Horn Handle on the REVO
>
>
>
> Good evening,
>
>
>
> Well I thought it was time to turn something of use again so I had a shoe
> horn kit that has been sitting in my "Kits" drawer long enough.
>
> So I turned this on my REVO.
>
> 6 start 3/8 pitch spiral. about 9.5 inches long.
>
> Species, honestly I have to look it up, so stay tuned. No its not cherry
> either.
>
> Fun little project that will serve me well.
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEF7e7aPeZ821y%3D0UXcao2essNCwTukQCNsn1MMR_x79w%40mail.gmail.com
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/003a01d99db9%24ac355ff0%2404a01fd0%24%40mmnet.com.au
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLH0bObCngZctBA_PAk2ui5itJsaE44xNbWQZgY03eU%2BfQ%40mail.gmail.com.

Re: Shoe Horn Handle on the REVO

2023-06-13 Thread Tim Ziegler

Thanks Mac,

I am actually still trying to decide what species it is. I don't recall any
of those species you mentioned.
But I will be looking it up. Just happened to be the exact size I was
looking for and was a very dense and
hard wood that seemed it would take the everyday use of a shoe horn.
Stay tuned.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Mon, Jun 12, 2023 at 10:03 PM M.W.Foscue  wrote:

> Tim,
>
>
>
> Very nice - thanks for sharing.
>
> The pics are low res. - so a bit difficult deciding the wood type.  But a
> couple guesses are:
>
> Peruvian Walnut?
>
> Paduk?
>
> Cumaru?
>
>
>
> Cheers!
>
> Mac
> --
> --
>
> -Original Message-
> From: 
> Sent: Jun 12, 2023 10:41 PM
> To: LOM Group , Tim Ziegler <
> timjzieg...@gmail.com>
> Subject: Shoe Horn Handle on the REVO
>
>
> Good evening,
>
> Well I thought it was time to turn something of use again so I had a shoe
> horn kit that has been sitting in my "Kits" drawer long enough.
> So I turned this on my REVO.
> 6 start 3/8 pitch spiral. about 9.5 inches long.
> Species, honestly I have to look it up, so stay tuned. No its not cherry
> either.
> Fun little project that will serve me well.
>
> Kind Regards,
> Timothy J. Ziegler
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/4292e417-46f0-3495-cf82-fbab363c635b%40earthlink.net
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEJPrDwXPVUdpob-WjXX5d0xdP%3DuBdskabH4A44DmFXvA%40mail.gmail.com.

RE: Shoe Horn Handle on the REVO

2023-06-12 Thread bulkeley

Very nice Tim totally proves simple looks great.

Done with your new fine pitch gears no doubt 

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Tuesday, June 13, 2023 12:41 PM
To: LOM Group ; Tim Ziegler 

Subject: Shoe Horn Handle on the REVO

 

Good evening,

 

Well I thought it was time to turn something of use again so I had a shoe horn 
kit that has been sitting in my "Kits" drawer long enough. 

So I turned this on my REVO. 

6 start 3/8 pitch spiral. about 9.5 inches long. 

Species, honestly I have to look it up, so stay tuned. No its not cherry 
either. 

Fun little project that will serve me well. 




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEF7e7aPeZ821y%3D0UXcao2essNCwTukQCNsn1MMR_x79w%40mail.gmail.com
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/003a01d99db9%24ac355ff0%2404a01fd0%24%40mmnet.com.au.

Re: Shoe Horn Handle on the REVO

2023-06-12 Thread M.W.Foscue

Tim,

Very nice - thanks for sharing.
The pics are low res. - so a bit difficult deciding the wood type.  But a 
couple guesses are:
Peruvian Walnut?
Paduk?
Cumaru?

Cheers!
Mac
-Original Message-
From: 
Sent: Jun 12, 2023 10:41 PM
To: LOM Group , Tim Ziegler 

Subject: Shoe Horn Handle on the REVO

Good evening, 
Well I thought it was time to turn something of use again so I had a shoe horn 
kit that has been sitting in my "Kits" drawer long enough. 
So I turned this on my REVO. 
6 start 3/8 pitch spiral. about 9.5 inches long. 
Species, honestly I have to look it up, so stay tuned. No its not cherry 
either. 
Fun little project that will serve me well. 
Kind Regards,Timothy J. Ziegler






-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/4292e417-46f0-3495-cf82-fbab363c635b%40earthlink.net.

Re: Shoe Horn Handle on the REVO

2023-06-12 Thread Tim Ziegler

Thanks Curt.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Mon, Jun 12, 2023 at 9:51 PM 'Curt George' via Legacy Ornamental Mills <
legacy-ornamental-mills@googlegroups.com> wrote:

> Tim
> That Elegant, Nicely Done!
> I cant wait to find out more. I like how the flutes and rope flows
> together in one handle.  A+ in my book.
> Thank you.
>
> C.A.G.
>
> On Monday, June 12, 2023 at 10:41:17 PM EDT, Tim Ziegler <
> timjzieg...@gmail.com> wrote:
>
>
> Good evening,
>
> Well I thought it was time to turn something of use again so I had a shoe
> horn kit that has been sitting in my "Kits" drawer long enough.
> So I turned this on my REVO.
> 6 start 3/8 pitch spiral. about 9.5 inches long.
> Species, honestly I have to look it up, so stay tuned. No its not cherry
> either.
> Fun little project that will serve me well.
>
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> Foreston MN 56330
>
> 320-294-5798 shop
> 320-630-2243 cell
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEF7e7aPeZ821y%3D0UXcao2essNCwTukQCNsn1MMR_x79w%40mail.gmail.com
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/623893060.1820684.1686624673650%40mail.yahoo.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLENJKh4kX6fQf5NSujiw63ic3dOA6X_CohAhO1bEiyBgA%40mail.gmail.com.

Re: Shoe Horn Handle on the REVO

2023-06-12 Thread 'Curt George' via Legacy Ornamental Mills

TimThat Elegant, Nicely Done!I cant wait to find out more. I like how the
flutes and rope flows together in one handle. A+ in my book.Thank you.
C.A.G.
On Monday, June 12, 2023 at 10:41:17 PM EDT, Tim Ziegler
wrote:

--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEF7e7aPeZ821y%3D0UXcao2essNCwTukQCNsn1MMR_x79w%40mail.gmail.com.

--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/623893060.1820684.1686624673650%40mail.yahoo.com.

Re: Shoe Horn Handle on the REVO

Re: Shoe Horn Handle on the REVO

Re: Shoe Horn Handle on the REVO

Re: Shoe Horn Handle on the REVO

RE: Shoe Horn Handle on the REVO

Re: Shoe Horn Handle on the REVO

Re: Shoe Horn Handle on the REVO

Re: Shoe Horn Handle on the REVO

Re: Shoe Horn Handle on the REVO

Re: Shoe Horn Handle on the REVO

Re: Shoe Horn Handle on the REVO

Re: Shoe Horn Handle on the REVO

Re: Shoe Horn Handle on the REVO

Re: Shoe Horn Handle on the REVO

Re: Shoe Horn Handle on the REVO

Re: Shoe Horn Handle on the REVO

RE: Shoe Horn Handle on the REVO

Re: Shoe Horn Handle on the REVO

RE: Shoe Horn Handle on the REVO

RE: Shoe Horn Handle on the REVO

Re: Shoe Horn Handle on the REVO

Re: Shoe Horn Handle on the REVO

Re: Shoe Horn Handle on the REVO

Re: Shoe Horn Handle on the REVO

Re: Shoe Horn Handle on the REVO

Re: Shoe Horn Handle on the REVO

Re: Shoe Horn Handle on the REVO

Re: Shoe Horn Handle on the REVO

RE: Shoe Horn Handle on the REVO

RE: Shoe Horn Handle on the REVO

Re: Shoe Horn Handle on the REVO

Re: Shoe Horn Handle on the REVO

RE: Shoe Horn Handle on the REVO

Re: Shoe Horn Handle on the REVO

Re: Shoe Horn Handle on the REVO

Re: Shoe Horn Handle on the REVO

36 matches

Site Navigation

Mail list logo

Footer information