Re: The Candlestick Maker

['Curt George' via Legacy Ornamental Mills]

 Good morning everyone.Richard I cant wait to see how your project works out.
That video was a good learning experience FOR ME, even if the project did not 
work out as hoped...   it did have a few spin-off's that ended up working very 
well for me. Having said that, I should have made a spindle using the follower, 
and not used the turn table... "O"Well that's water under the bridge, so to 
speak.
The idea is simple, the front mounting of the template follower is not hard to 
do. if you choose to make one, I wish you luck on it.
talk to you, and all more.
Have a good day.
C.A.G.
On Tuesday, January 9, 2018, 4:43:49 AM EST, Richard Ellis 
 wrote:  
 
 Thanks Mike,Although I had seen it before, when I go back though time, looking 
at nearly all the previous postsMy little Revo is mounted so that I can get at 
either side or end, so I think from the back will work best for me.I was hoping 
to get a  900 so that I should have a little more length with the Revo, But am 
giving up, !!!A month ago I bought another wood working lathe and am going to 
try to make the chuck, plate and other attachments compatible with the Revo At 
he present time I am going from my Scrollsaw to wood lathe and then to the 
Revo I am quite bald now, with all the head scratchingI think Curt did 
a similar thing in his shop.I am always hoping someone in the U.K. would chat 
about their LOM's As our power supply is different from the U.S.Richard

On Monday, January 8, 2018 at 11:41:43 PM UTC, LILtwisted wrote:
  
Here is a link to a video where Curtis was using a Y axis follower in the front 
of the machine.
 
https://www.youtube.com/watch? v=Y29sZ43PwhA
 
Mike OK
 
 
 On 1/8/2018 9:40 AM, 'Curt George' via Legacy Ornamental Mills wrote:
  
  Good morning Richard 
  I can not talk for David, But I too have some problems with the template 
follower working from  the back of the machine. I made a proto- type follower 
work form the front of my machine,a few years ago,  I like  the control that I 
get with the follower where I can touch it. This is not a good photo, but it is 
the best that I can find at this moment. I used uni-sturt with T bolts to 
attach the template holder to the front of the legacy. then I made an 
adjustable follower that attached to the carriage. this set-up worked pretty 
good for the job that I was doing. But having said that, there still is a lot 
of room for improvement, on this idea. 
  Anyone want to try it for them self's?  There are no secrets here just 
different views of the same problems. Who knows, perhaps your ideas, might be 
the one thing someone else out that may need, to make there machine work 
perfect. 
  C.A.G. 
  
  
  
  
  
  
  
 
  On Monday, January 8, 2018 5:04 AM, Richard Ellis  
wrote:
  
 
   Hi Curt I found that video very interesting and did ask the question 
- does David always stand behind the Revo ?? I did not get an 
answer but I find it to work better if I stand behind when following a 
template, I seem to have more control over the pin/ follower.  Does anyone else 
stand behind sometimes???  David does make some very nice sticks
 
 On Saturday, December 9, 2017 at 3:55:34 PM UTC, Curt George wrote: 
   Hello Everyone. I was looking for some info. on a project that I am working 
on, while searching, I found this video.  Watch and see what I found,( in the 
video, its not advertised but none the less its there.)  ;-) 
  https://www.youtube.com/watch? v=8aj2ncKrCDA  video.
  
  
  https://www.andurildesigns. com/candlesticks    web site 
  
  
  Have a good weekend. 
  C.A.G.   
   -- 
 You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
 To unsubscribe from this group and stop receiving emails from it, send an 
email to legacy-ornamental-mills+ unsubscr...@googlegroups.com.
 To post to this group, send email to legacy-orna...@ googlegroups.com.
 Visit this group at https://groups.google.com/ group/legacy-ornamental-mills.
 For more options, visit https://groups.google.com/d/ optout.
  
 
  -- 
 You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
 To unsubscribe from this group and stop receiving emails from it, send an 
email to legacy-ornamental-mills+ unsubscr...@googlegroups.com.
 To post to this group, send email to legacy-orna...@ googlegroups.com.
 Visit this group at https://groups.google.com/ group/legacy-ornamental-mills.
 For more options, visit https://groups.google.com/d/ optout.
 
 
 


-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.goo

Re: The Candlestick Maker

[Richard Ellis]

Thanks Mike,
Although I had seen it before, when I go back though time, looking at 
nearly all the previous posts
My little Revo is mounted so that I can get at either side or end, so I 
think from the back will work best for me.
I was hoping to get a  900 so that I should have a little more length with 
the Revo, But am giving up, !!!
A month ago I bought another wood working lathe and am going to try to make 
the chuck, plate and other attachments compatible with the Revo
 At he present time I am going from my Scrollsaw to wood lathe and then to 
the Revo I am quite bald now, with all the head scratching
I think Curt did a similar thing in his shop.
I am always hoping someone in the U.K. would chat about their LOM's As our 
power supply is different from the U.S.
Richard

On Monday, January 8, 2018 at 11:41:43 PM UTC, LILtwisted wrote:
>
> Here is a link to a video where Curtis was using a Y axis follower in the 
> front of the machine.
>
> https://www.youtube.com/watch?v=Y29sZ43PwhA
>
> Mike OK
>
> On 1/8/2018 9:40 AM, 'Curt George' via Legacy Ornamental Mills wrote:
>
> Good morning Richard
>
> I can not talk for David, But I too have some problems with the template 
> follower working from  the back of the machine.
> I made a proto- type follower work form the front of my machine,a few 
> years ago,  I like  the control that I get with the follower where I can 
> touch it.
> This is not a good photo, but it is the best that I can find at this 
> moment. I used uni-sturt with T bolts to attach the template holder to the 
> front of the legacy. then I made an adjustable follower that attached to 
> the carriage.
> this set-up worked pretty good for the job that I was doing.
> But having said that, there still is a lot of room for improvement, on 
> this idea.
>
> Anyone want to try it for them self's? 
> There are no secrets here just different views of the same problems.
> Who knows, perhaps your ideas, might be the one thing someone else out 
> that may need, to make there machine work perfect.
>
> C.A.G.
>
>
>
>
>
>
> [image: Inline image]
>
>
> On Monday, January 8, 2018 5:04 AM, Richard Ellis  
>  wrote:
>
>
> Hi Curt 
> I found that video very interesting and did ask the question - 
> does David always stand behind the Revo ??* I did not get an answer* 
> but I find it to work better if I stand behind when following a template, I 
> seem to have more control over the pin/ follower. 
> Does anyone else stand behind sometimes???
>  David does make some very nice sticks
>
> On Saturday, December 9, 2017 at 3:55:34 PM UTC, Curt George wrote: 
>
> Hello Everyone.
> I was looking for some info. on a project that I am working on, while 
> searching, I found this video.  Watch and see what I found,( in the video, 
> its not advertised but none the less its there.)  ;-)
>
> https://www.youtube.com/watch? v=8aj2ncKrCDA 
>   video.
>
>
> https://www.andurildesigns. com/candlesticks 
> web site 
>
>
> Have a good weekend.
>
> C.A.G.
>
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com 
> .
> To post to this group, send email to legacy-orna...@googlegroups.com 
> .
> Visit this group at 
> https://groups.google.com/group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/d/optout.
>
>
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com 
> .
> To post to this group, send email to legacy-orna...@googlegroups.com 
> .
> Visit this group at 
> https://groups.google.com/group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/d/optout.
>
>
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: The Candlestick Maker

[Okla Mike (Liltwisted)]

Here is a link to a video where Curtis was using a Y axis follower in 
the front of the machine.


https://www.youtube.com/watch?v=Y29sZ43PwhA

Mike OK


On 1/8/2018 9:40 AM, 'Curt George' via Legacy Ornamental Mills wrote:

Good morning Richard

I can not talk for David, But I too have some problems with the 
template follower working from  the back of the machine.
I made a proto- type follower work form the front of my machine,a few 
years ago, I like  the control that I get with the follower where I 
can touch it.
This is not a good photo, but it is the best that I can find at this 
moment. I used uni-sturt with T bolts to attach the template holder to 
the front of the legacy. then I made an adjustable follower that 
attached to the carriage.

this set-up worked pretty good for the job that I was doing.
But having said that, there still is a lot of room for improvement, on 
this idea.


Anyone want to try it for them self's?
There are no secrets here just different views of the same problems.
Who knows, perhaps your ideas, might be the one thing someone else out 
that may need, to make there machine work perfect.


C.A.G.






Inline image


On Monday, January 8, 2018 5:04 AM, Richard Ellis 
 wrote:



Hi Curt
I found that video very interesting and did ask the question - 
does David always stand behind the Revo ??_I did not get an 
answer_ but I find it to work better if I stand behind when following 
a template, I seem to have more control over the pin/ follower.

Does anyone else stand behind sometimes???
 David does make some very nice sticks

On Saturday, December 9, 2017 at 3:55:34 PM UTC, Curt George wrote:

Hello Everyone.
I was looking for some info. on a project that I am working on,
while searching, I found this video.  Watch and see what I found,(
in the video, its not advertised but none the less its there.) ;-)

https://www.youtube.com/watch? v=8aj2ncKrCDA
  video.


https://www.andurildesigns. com/candlesticks
    web site


Have a good weekend.

C.A.G.

--
You received this message because you are subscribed to the Google 
Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send 
an email to legacy-ornamental-mills+unsubscr...@googlegroups.com 
.
To post to this group, send email to 
legacy-ornamental-mills@googlegroups.com 
.
Visit this group at 
https://groups.google.com/group/legacy-ornamental-mills.

For more options, visit https://groups.google.com/d/optout.


--
You received this message because you are subscribed to the Google 
Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send 
an email to legacy-ornamental-mills+unsubscr...@googlegroups.com 
.
To post to this group, send email to 
legacy-ornamental-mills@googlegroups.com 
.
Visit this group at 
https://groups.google.com/group/legacy-ornamental-mills.

For more options, visit https://groups.google.com/d/optout.


--
You received this message because you are subscribed to the Google Groups "Legacy 
Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: The Candlestick Maker

[russ veinot]

Curt,
If I remember right, you and lil twisted did a video showing that 
follower.  I have always said that you need a dedicated spot for the LOM 
with access all the way around.  I also agree that the template follower is 
better suited on the front of the machine.  i did a video recently on using 
the incra fence for the x axis.  i have since then been thinking about the 
same precision control for the y axis.  I believe it would have to mount on 
the front of the LOM instead of the back for the same reasons. but still 
working on the bugs for that.

Russ

On Saturday, December 9, 2017 at 9:55:34 AM UTC-6, Curt George wrote:

> Hello Everyone.
> I was looking for some info. on a project that I am working on, while 
> searching, I found this video.  Watch and see what I found,( in the video, 
> its not advertised but none the less its there.)  ;-)
>
> https://www.youtube.com/watch?v=8aj2ncKrCDA  video.
>
>
> https://www.andurildesigns.com/candlesticksweb site 
>
>
> Have a good weekend.
>
> C.A.G.
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: The Candlestick Maker

[Richard Ellis]

Hi Curt
I found that video very interesting and did ask the question - does 
David always stand behind the Revo ??* I did not get an answer* but I 
find it to work better if I stand behind when following a template, I seem 
to have more control over the pin/ follower. 
Does anyone else stand behind sometimes???
 David does make some very nice sticks

On Saturday, December 9, 2017 at 3:55:34 PM UTC, Curt George wrote:
>
> Hello Everyone.
> I was looking for some info. on a project that I am working on, while 
> searching, I found this video.  Watch and see what I found,( in the video, 
> its not advertised but none the less its there.)  ;-)
>
> https://www.youtube.com/watch?v=8aj2ncKrCDA  video.
>
>
> https://www.andurildesigns.com/candlesticksweb site 
>
>
> Have a good weekend.
>
> C.A.G.
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: The Candlestick Maker

[rookie]

I really enjoyed those two clips, thank you for posting them.  Absolutely 
beautiful work, he also has a great website.  Happy holidays to all of you, 
Shell in Oregon.  

On Saturday, December 9, 2017 at 7:55:34 AM UTC-8, Curt George wrote:
>
> Hello Everyone.
> I was looking for some info. on a project that I am working on, while 
> searching, I found this video.  Watch and see what I found,( in the video, 
> its not advertised but none the less its there.)  ;-)
>
> https://www.youtube.com/watch?v=8aj2ncKrCDA  video.
>
>
> https://www.andurildesigns.com/candlesticksweb site 
>
>
> Have a good weekend.
>
> C.A.G.
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: The Candlestick Maker

[Richard Ellis]

Curt
I have seen the video very interesting. Thanks for putting your finds on 
for us to look at., One question Does David always stand behind the 
Revo, or is it just to show the video??

On Saturday, December 9, 2017 at 3:55:34 PM UTC, Curt George wrote:
>
> Hello Everyone.
> I was looking for some info. on a project that I am working on, while 
> searching, I found this video.  Watch and see what I found,( in the video, 
> its not advertised but none the less its there.)  ;-)
>
> https://www.youtube.com/watch?v=8aj2ncKrCDA  video.
>
>
> https://www.andurildesigns.com/candlesticksweb site 
>
>
> Have a good weekend.
>
> C.A.G.
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: The Candlestick Maker

[Tim Krause]

David is a member of this group.On Dec 9, 2017 7:55 AM, 'Curt George' via 
Legacy Ornamental Mills  wrote:
>
> Hello Everyone.
> I was looking for some info. on a project that I am working on, while 
> searching, I found this video.  Watch and see what I found,( in the video, 
> its not advertised but none the less its there.)  ;-)
>
> https://www.youtube.com/watch?v=8aj2ncKrCDA  video.
>
>
> https://www.andurildesigns.com/candlesticks    web site 
>
>
> Have a good weekend.
>
> C.A.G.
>
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
> Visit this group at https://groups.google.com/group/legacy-ornamental-mills.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: The Candlestick Maker

['Curt George' via Legacy Ornamental Mills]

Hello RussMostly by dumb luck. ;-)I was doing a search for... things that I 
like.   I saw a picture of one of his roped candle sticks , so I followed his 
link, which had the video on it. I did not know that the REVO was used, until 
after I watched the video. I would like to again state, that its not the 
machine, but the Art'st that makes the art. His work is very nice. and I am 
glad to see that the machine that he chooses to use has the Legacy trade mark. 
;-)
talk to you all latter.
C.A.G. 

On Saturday, December 9, 2017 12:22 PM, russ veinot  
wrote:
 

 Nice, how do you find all these wonderful videos ??

Russ
On Saturday, December 9, 2017 at 9:55:34 AM UTC-6, Curt George wrote:
Hello Everyone.I was looking for some info. on a project that I am working on, 
while searching, I found this video.  Watch and see what I found,( in the 
video, its not advertised but none the less its there.)  ;-)
https://www.youtube.com/watch? v=8aj2ncKrCDA  video.


https://www.andurildesigns. com/candlesticks    web site 


Have a good weekend.
C.A.G.
-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.


   

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: The Candlestick Maker

[Okla Mike (Liltwisted)]

I've seen this guy before, does very nice work


On 12/9/2017 9:55 AM, 'Curt George' via Legacy Ornamental Mills wrote:

Hello Everyone.
I was looking for some info. on a project that I am working on, while 
searching, I found this video.  Watch and see what I found,( in the 
video, its not advertised but none the less its there.)  ;-)


https://www.youtube.com/watch?v=8aj2ncKrCDA video.


https://www.andurildesigns.com/candlesticks   web site


Have a good weekend.

C.A.G.
--
You received this message because you are subscribed to the Google 
Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send 
an email to legacy-ornamental-mills+unsubscr...@googlegroups.com 
.
To post to this group, send email to 
legacy-ornamental-mills@googlegroups.com 
.
Visit this group at 
https://groups.google.com/group/legacy-ornamental-mills.

For more options, visit https://groups.google.com/d/optout.


--
You received this message because you are subscribed to the Google Groups "Legacy 
Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: The Candlestick Maker

[russ veinot]

Nice, how do you find all these wonderful videos ??

Russ

On Saturday, December 9, 2017 at 9:55:34 AM UTC-6, Curt George wrote:

> Hello Everyone.
> I was looking for some info. on a project that I am working on, while 
> searching, I found this video.  Watch and see what I found,( in the video, 
> its not advertised but none the less its there.)  ;-)
>
> https://www.youtube.com/watch?v=8aj2ncKrCDA  video.
>
>
> https://www.andurildesigns.com/candlesticksweb site 
>
>
> Have a good weekend.
>
> C.A.G.
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: The Candlestick Maker

[Ron Taylor]

Thankyou, nice video. Ron T.

On Sat, Dec 9, 2017 at 9:55 AM, 'Curt George' via Legacy Ornamental Mills <
legacy-ornamental-mills@googlegroups.com> wrote:

> Hello Everyone.
> I was looking for some info. on a project that I am working on, while
> searching, I found this video.  Watch and see what I found,( in the video,
> its not advertised but none the less its there.)  ;-)
>
> https://www.youtube.com/watch?v=8aj2ncKrCDA  video.
>
>
> https://www.andurildesigns.com/candlesticksweb site
>
>
> Have a good weekend.
>
> C.A.G.
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to legacy-ornamental-mills@
> googlegroups.com.
> Visit this group at https://groups.google.com/
> group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

The Candlestick Maker

['Curt George' via Legacy Ornamental Mills]

Hello Everyone.I was looking for some info. on a project that I am working on, 
while searching, I found this video.  Watch and see what I found,( in the 
video, its not advertised but none the less its there.)  ;-)
https://www.youtube.com/watch?v=8aj2ncKrCDA  video.


https://www.andurildesigns.com/candlesticks    web site 


Have a good weekend.
C.A.G.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.