Re: [LegacyUG] run-time error 429
Sherry (and all others using Spybot Search Destroy) After I had sent the help message, I did try running the Check/Repair but that did nothing ; then, before I got your message this morning, I tried running Microsoft's System Restore and moving back to a time prior to the weekly clean-up of my computer. Then I tried running Legacy and it worked perfectly. So my gut level feeling was that something had happened when I ran one of the cleanup programs on my computer (Spybot, AVG, AdAware, CCleaner and Registry Mechanic). So I looked to see what each program had removed starting (fortunately) with Spybot. It was ICQ-SpyMonitor. Then I went to the internet and looked that up. The first site up happened to be ICQ-Spymonitor - Safer Networking Forums on which I found a post from you. Apparently by removing the supposed spyware program, for which Spybot appears to have thrown a false positive, it removed some coding that Legacy needs to run. After making certain Legacy was running properly and that I had a clean backup, I next tried cleaning up the computer with AVG and AdAware, neither of which caused any problems; however, I am still left with the supposed spyware ICQ-SpyMonitor on my computer which does bother me. So now the question is should I go ahead and run the check/repair again and then, if that does nothing, follow through with the other instructions on that help? How about the Spybot issue? Since you responded on the Safer Newworking Forum, I presume you also use Spybot? Pat - Original Message - From: Sherry/Support [EMAIL PROTECTED] To: LegacyUserGroup@legacyfamilytree.com Sent: Saturday, May 05, 2007 5:14 PM Subject: RE: [LegacyUG] run-time error 429 Pat, Go to http://www.LegacyFamilyTree.com/Help.asp Solutions by Error Description, where you'll find the solution under the topic Error Opening Database: Active X Component Missing Thanks for using Legacy. Sherry Customer Support Millennia Corporation [EMAIL PROTECTED] http://www.LegacyFamilyTree.com We are changing the world of genealogy! When replying to this message, please include all previous correspondence. Thanks. Original Message- -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Pat Jones Sent: Saturday, May 05, 2007 9:57 AM To: LegacyUserGroup Subject: [LegacyUG] run-time error 429 I just attempted to open my Legacy database and got a blank screen, then a pop-up message Run-time error 429; Active X component can't create object. When I closed out Legacy, another pop-up said, :You do not have an appropriate license to use this functionality. I looked for this error in the help files on the website but didn't find it. Most of the menu items are grayed out when I pull up the program, but File, Internet, and Help are accessible. I tried File, Check/repair but the datatbase file won't load and gives me the run-time error message. I tried reloading the database from the zip file but that didn't work either. Any help appreciated. Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] run-time error 429
Hi Pat and all, I use the same security utilities as Pat and Spybot SD removed the ICQ-SpyMonitor yesterday. I did not have ocassion to run Legacy so did not notice until this morning that it would not run. After receipt of Pat's note, I opened Spybot SD and had it restore the ICQ-SpyMonitor and now Legacy runs just fine again. Looks like Spybot SD is getting a little over agressive in hunting out spyware. Jim - Original Message - From: Pat Jones [EMAIL PROTECTED] To: LegacyUserGroup@legacyfamilytree.com Sent: Sunday, May 06, 2007 6:50 AM Subject: Re: [LegacyUG] run-time error 429 Sherry (and all others using Spybot Search Destroy) After I had sent the help message, I did try running the Check/Repair but that did nothing ; then, before I got your message this morning, I tried running Microsoft's System Restore and moving back to a time prior to the weekly clean-up of my computer. Then I tried running Legacy and it worked perfectly. So my gut level feeling was that something had happened when I ran one of the cleanup programs on my computer (Spybot, AVG, AdAware, CCleaner and Registry Mechanic). So I looked to see what each program had removed starting (fortunately) with Spybot. It was ICQ-SpyMonitor. Then I went to the internet and looked that up. The first site up happened to be ICQ-Spymonitor - Safer Networking Forums on which I found a post from you. Apparently by removing the supposed spyware program, for which Spybot appears to have thrown a false positive, it removed some coding that Legacy needs to run. After making certain Legacy was running properly and that I had a clean backup, I next tried cleaning up the computer with AVG and AdAware, neither of which caused any problems; however, I am still left with the supposed spyware ICQ-SpyMonitor on my computer which does bother me. So now the question is should I go ahead and run the check/repair again and then, if that does nothing, follow through with the other instructions on that help? How about the Spybot issue? Since you responded on the Safer Newworking Forum, I presume you also use Spybot? Pat - Original Message - From: Sherry/Support [EMAIL PROTECTED] To: LegacyUserGroup@legacyfamilytree.com Sent: Saturday, May 05, 2007 5:14 PM Subject: RE: [LegacyUG] run-time error 429 Pat, Go to http://www.LegacyFamilyTree.com/Help.asp Solutions by Error Description, where you'll find the solution under the topic Error Opening Database: Active X Component Missing Thanks for using Legacy. Sherry Customer Support Millennia Corporation [EMAIL PROTECTED] http://www.LegacyFamilyTree.com We are changing the world of genealogy! When replying to this message, please include all previous correspondence. Thanks. Original Message- -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Pat Jones Sent: Saturday, May 05, 2007 9:57 AM To: LegacyUserGroup Subject: [LegacyUG] run-time error 429 I just attempted to open my Legacy database and got a blank screen, then a pop-up message Run-time error 429; Active X component can't create object. When I closed out Legacy, another pop-up said, :You do not have an appropriate license to use this functionality. I looked for this error in the help files on the website but didn't find it. Most of the menu items are grayed out when I pull up the program, but File, Internet, and Help are accessible. I tried File, Check/repair but the datatbase file won't load and gives me the run-time error message. I tried reloading the database from the zip file but that didn't work either. Any help appreciated. Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at
[LegacyUG] Documents
Is there a way to attach a document to a person, for example a death cert, marriage license, census page. I have tried scanning but they come out so small you can't read them. All help appreciated. Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Documents
I save my scanned documents as pictures in the source detail Picture Gallery. I don't have any problems with reading my documents which range from small newspaper clippings to full page documents. Have you tried using the Zoom In function to view the document in the Picture Gallery? What resolution are you scanning your documents? I believe most scanning software defaults to 300dpi, which is what I use for documents. You might want to check your software settings. Cyndi wrote: Is there a way to attach a document to a person, for example a death cert, marriage license, census page. I have tried scanning but they come out so small you can't read them. All help appreciated. Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://www.LegacyFamilyTree.com/Etiquette.asp http://legacyfamilytree.com/DeluxeEdition.asp%3Ehttp://legacyfamilytree.com/DeluxeEdition.asp%3C/a%3E.%3C/p%3E%0A%0A%0A%0A%3Cp%3ELegacy%20User%20Group%20guidelines%20can%20be%20found%20at:%20%3Ca%20href= To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.467 / Virus Database: 269.6.4/790 - Release Date: 5/5/2007 10:34 AM Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Documents
Cyndi Under Master Sources, there is a pictures tab on the Master Source. Click on the tab. Once there, look for picture off to the right, click on it. Then find and add your pic. Once it is in the Master Source, you can enlarge it to read the data. I keep pictures of any source I can as there is no transcribing errors on my part! David - Original Message - From: Cyndi To: LegacyUserGroup@LegacyFamilyTree.com Sent: Sunday, May 06, 2007 9:47 AM Subject: [LegacyUG] Documents Is there a way to attach a document to a person, for example a death cert, marriage license, census page. I have tried scanning but they come out so small you can't read them. All help appreciated. Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Gedcom - Family Historian programme
Ron Would you mind giving the details of getting Zip Genius. I tried unsuccessfully. Do you use the standard version or the Suite. Which download method do you use. I tried both under two download choices and got an error message something like Not a valid ID. Thanks, Rhodes At 06:48 AM 5/3/2007, you wrote: The Windows unzip procedure does not recognise all types of zip files. I suggest you follow Gene's advice or get Zip Genius as I suggested earlier. Ron Ferguson _ For Genealogy, Software and Social visit: http://myweb.tiscali.co.uk/fergys/ *New Blog* Parish Registers Includes the family tree for Alan J Grimshaw http://myweb.tiscali.co.uk/fergys/Grimshaw/ __ From: Gene Young [EMAIL PROTECTED] Reply-To: LegacyUserGroup@legacyfamilytree.com To: LegacyUserGroup@legacyfamilytree.com Subject: Re: [LegacyUG] Gedcom - Family Historian programme Date: Thu, 03 May 2007 08:01:31 -0400 carolyn williams wrote: I am determined to master this! But when I go thru the Windows XP procedure, it tells me the content is blocked. So I click on how to unblock and follow the very simple steps until the last one, that says 'click unblock near bottom of dialog box'. There is no such word in this box and I have tried everything else. Running out of patience at this point! Caro Go to www.ultimatezip.com/download.htm and download and install UltimateZip. After it is installed, right clicking on a zip file will give you options to extract:, extract to here: or extract to a location. Extract it to a location of your choice then you can import it into Legacy. Gene Y. _ Txt a lot? Get Messenger FREE on your mobile. https://livemessenger.mobile.uk.msn.com/ Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Documents
Cyndi: Go to the Master Source, click on the picture, that takes you to the picture gallery, then find and click on zoom. There is a + and - sign button for making the pic even larger or smaller. On another notewhen you are putting pics in your Source Documentation, the picture should be in the file Legacy/Pictures. When you back up the Legacy/Data files (Legacy/Data backs up only the pathname to the pictures, not the actual pictures) you will be asked if you want to back up the pictures, audio, and video files? You should do that too. BUT the pics have to be in the Legacy/Pictures file to be backed up. David - Original Message - From: Cyndi To: LegacyUserGroup@legacyfamilytree.com Sent: Sunday, May 06, 2007 10:54 AM Subject: RE: [LegacyUG] Documents I can add it but how do I enlarge it From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of David Bonnett Sent: Sunday, May 06, 2007 10:08 AM To: LegacyUserGroup@legacyfamilytree.com Subject: Re: [LegacyUG] Documents Cyndi Under Master Sources, there is a pictures tab on the Master Source. Click on the tab. Once there, look for picture off to the right, click on it. Then find and add your pic. Once it is in the Master Source, you can enlarge it to read the data. I keep pictures of any source I can as there is no transcribing errors on my part! David - Original Message - From: Cyndi To: LegacyUserGroup@LegacyFamilyTree.com Sent: Sunday, May 06, 2007 9:47 AM Subject: [LegacyUG] Documents Is there a way to attach a document to a person, for example a death cert, marriage license, census page. I have tried scanning but they come out so small you can't read them. All help appreciated. Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Documents
David, If I may correct you - the pictures do not have to be in the Legacy/pictures folder to be backed up. Mine are in folders in My Documents and both the images and paths backup fine. There are other advantages un having them in Legacy/Pictures, However. Ron Ferguson _ For Genealogy, Software and Social visit: http://myweb.tiscali.co.uk/fergys/ *New Blog* Create Legacy Web Pages Includes the family tree for Alan J Grimshaw http://myweb.tiscali.co.uk/fergys/Grimshaw/ __ From: David Bonnett [EMAIL PROTECTED] Reply-To: LegacyUserGroup@legacyfamilytree.com To: LegacyUserGroup@legacyfamilytree.com Subject: Re: [LegacyUG] Documents Date: Sun, 06 May 2007 11:49:46 -0400 Cyndi: Go to the Master Source, click on the picture, that takes you to the picture gallery, then find and click on zoom. There is a + and - sign button for making the pic even larger or smaller. On another notewhen you are putting pics in your Source Documentation, the picture should be in the file Legacy/Pictures. When you back up the Legacy/Data files (Legacy/Data backs up only the pathname to the pictures, not the actual pictures) you will be asked if you want to back up the pictures, audio, and video files? You should do that too. BUT the pics have to be in the Legacy/Pictures file to be backed up. David - Original Message - From: Cyndi To: LegacyUserGroup@legacyfamilytree.com Sent: Sunday, May 06, 2007 10:54 AM Subject: RE: [LegacyUG] Documents I can add it but how do I enlarge it From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of David Bonnett Sent: Sunday, May 06, 2007 10:08 AM To: LegacyUserGroup@legacyfamilytree.com Subject: Re: [LegacyUG] Documents Cyndi Under Master Sources, there is a pictures tab on the Master Source. Click on the tab. Once there, look for picture off to the right, click on it. Then find and add your pic. Once it is in the Master Source, you can enlarge it to read the data. I keep pictures of any source I can as there is no transcribing errors on my part! David - Original Message - From: Cyndi To: LegacyUserGroup@LegacyFamilyTree.com Sent: Sunday, May 06, 2007 9:47 AM Subject: [LegacyUG] Documents Is there a way to attach a document to a person, for example a death cert, marriage license, census page. I have tried scanning but they come out so small you can't read them. All help appreciated. _ Txt a lot? Get Messenger FREE on your mobile. https://livemessenger.mobile.uk.msn.com/ Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
RE: [LegacyUG] LUG in other languages?
Je ne sais pas Ron Ferguson _ For Genealogy, Software and Social visit: http://myweb.tiscali.co.uk/fergys/ *New Blog* Create Legacy Web Pages Includes the family tree for Alan J Grimshaw http://myweb.tiscali.co.uk/fergys/Grimshaw/ __ From: Dawn Crowley [EMAIL PROTECTED] Reply-To: LegacyUserGroup@legacyfamilytree.com To: LegacyUserGroup@legacyfamilytree.com Subject: [LegacyUG] LUG in other languages? Date: Sun, 06 May 2007 09:15:18 -0700 I am just curious about this. Since Legacy is also available in other languages, does Legacy also offer mailing lists similar to this one in the other languages that Legacy provides? _ Reserve your place in history - Email Britain! http://www.emailbritain.co.uk/ Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
RE: [LegacyUG] Documents
Yes Ron Ferguson _ For Genealogy, Software and Social visit: http://myweb.tiscali.co.uk/fergys/ *New Blog* Create Legacy Web Pages Includes the family tree for Alan J Grimshaw http://myweb.tiscali.co.uk/fergys/Grimshaw/ __ From: Cyndi [EMAIL PROTECTED] Reply-To: LegacyUserGroup@legacyfamilytree.com To: LegacyUserGroup@legacyfamilytree.com Subject: RE: [LegacyUG] Documents Date: Sun, 6 May 2007 11:55:33 -0400 Thanks I got that to work and thanks for the backup tip I didn' tknow that, when I tell it to back up my multi media files is it backing up my photos? _ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of David Bonnett Sent: Sunday, May 06, 2007 11:50 AM To: LegacyUserGroup@legacyfamilytree.com Subject: Re: [LegacyUG] Documents Cyndi: Go to the Master Source, click on the picture, that takes you to the picture gallery, then find and click on zoom. There is a + and - sign button for making the pic even larger or smaller. On another notewhen you are putting pics in your Source Documentation, the picture should be in the file Legacy/Pictures. When you back up the Legacy/Data files (Legacy/Data backs up only the pathname to the pictures, not the actual pictures) you will be asked if you want to back up the pictures, audio, and video files? You should do that too. BUT the pics have to be in the Legacy/Pictures file to be backed up. David - Original Message - From: Cyndi mailto:[EMAIL PROTECTED] To: LegacyUserGroup@legacyfamilytree.com Sent: Sunday, May 06, 2007 10:54 AM Subject: RE: [LegacyUG] Documents I can add it but how do I enlarge it _ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of David Bonnett Sent: Sunday, May 06, 2007 10:08 AM To: LegacyUserGroup@legacyfamilytree.com Subject: Re: [LegacyUG] Documents Cyndi Under Master Sources, there is a pictures tab on the Master Source. Click on the tab. Once there, look for picture off to the right, click on it. Then find and add your pic. Once it is in the Master Source, you can enlarge it to read the data. I keep pictures of any source I can as there is no transcribing errors on my part! David - Original Message - From: Cyndi mailto:[EMAIL PROTECTED] To: LegacyUserGroup@LegacyFamilyTree.com Sent: Sunday, May 06, 2007 9:47 AM Subject: [LegacyUG] Documents Is there a way to attach a document to a person, for example a death cert, marriage license, census page. I have tried scanning but they come out so small you can't read them. All help appreciated. _ Txt a lot? Get Messenger FREE on your mobile. https://livemessenger.mobile.uk.msn.com/ Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] LUG in other languages?
Yes, the Legacy Dutch mailinglist is at: http://www.legacyfamilytree.com/LegacyLists_Nederlands.asp Evert 2007/5/6, Dawn Crowley [EMAIL PROTECTED]: I am just curious about this. Since Legacy is also available in other languages, does Legacy also offer mailing lists similar to this one in the other languages that Legacy provides? Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
RE: [LegacyUG] LUG in other languages?
Dawn, The Danish version is the only one that's been officially released. The other languages that are in testing phase have their own lists or forums in the native language. We still have two languages that haven't reached the testing phase yet. You can see a list of languages in translation at http://www.legacyfamilytree.com/InternationalLegacyVersions.asp Thanks for using Legacy. Sherry Customer Support Millennia Corporation [EMAIL PROTECTED] http://www.LegacyFamilyTree.com We are changing the world of genealogy! When replying to this message, please include all previous correspondence. Thanks. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dawn Crowley Sent: Sunday, May 06, 2007 9:15 AM To: LegacyUserGroup@legacyfamilytree.com Subject: [LegacyUG] LUG in other languages? I am just curious about this. Since Legacy is also available in other languages, does Legacy also offer mailing lists similar to this one in the other languages that Legacy provides? Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
RE: [LegacyUG] run-time error 429
I had exactly the same experience yesterday and Pat's email arrived just in time for me to remedy the situation, same as Jim. A good one to be aware of. Tom -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jimquist Sent: Sunday, 6 May 2007 11:28 PM To: LegacyUserGroup@legacyfamilytree.com Subject: Re: [LegacyUG] run-time error 429 Hi Pat and all, I use the same security utilities as Pat and Spybot SD removed the ICQ-SpyMonitor yesterday. I did not have ocassion to run Legacy so did not notice until this morning that it would not run. After receipt of Pat's note, I opened Spybot SD and had it restore the ICQ-SpyMonitor and now Legacy runs just fine again. Looks like Spybot SD is getting a little over agressive in hunting out spyware. Jim - Original Message - From: Pat Jones [EMAIL PROTECTED] To: LegacyUserGroup@legacyfamilytree.com Sent: Sunday, May 06, 2007 6:50 AM Subject: Re: [LegacyUG] run-time error 429 Sherry (and all others using Spybot Search Destroy) After I had sent the help message, I did try running the Check/Repair but that did nothing ; then, before I got your message this morning, I tried running Microsoft's System Restore and moving back to a time prior to the weekly clean-up of my computer. Then I tried running Legacy and it worked perfectly. So my gut level feeling was that something had happened when I ran one of the cleanup programs on my computer (Spybot, AVG, AdAware, CCleaner and Registry Mechanic). So I looked to see what each program had removed starting (fortunately) with Spybot. It was ICQ-SpyMonitor. Then I went to the internet and looked that up. The first site up happened to be ICQ-Spymonitor - Safer Networking Forums on which I found a post from you. Apparently by removing the supposed spyware program, for which Spybot appears to have thrown a false positive, it removed some coding that Legacy needs to run. After making certain Legacy was running properly and that I had a clean backup, I next tried cleaning up the computer with AVG and AdAware, neither of which caused any problems; however, I am still left with the supposed spyware ICQ-SpyMonitor on my computer which does bother me. So now the question is should I go ahead and run the check/repair again and then, if that does nothing, follow through with the other instructions on that help? How about the Spybot issue? Since you responded on the Safer Newworking Forum, I presume you also use Spybot? Pat -- I am using the free version of SPAMfighter for private users. It has removed 153 spam emails to date. Paying users do not have this message in their emails. Get the free SPAMfighter here: http://www.spamfighter.com/len Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
[LegacyUG] Importing Pictures
Well I think I really screwed up, -big time... again! While working with my family file in legacy deluxe, I managed to delete all of the paths to the pictures and thereby eliminating the pictures within legacy. I know that they are still on the hard drive where they are supposed to be, I was able to reestablish the paths by simply importing it from a recent backup of multimedia. However, this did not import the pictures that were attached throughout the program. I know that I can go to the picture center and reattach all the pictures, one by one, by using a printout of the various paths, and names of the pictures from the backup, and then manually attaching them into my current file. I have done quite a bit of work repairing my current file, so, to go back to the backup file, and use it would be lot more work than trying to attach the pictures... I think. I try to import the multimedia into my current database, but I could not figure out how to do it so that it would attach all the pictures as they were attached in the backup. I hope I didn't confuse everybody too much, if not, then you can see my problem. The paths to the pictures in the backup file are the same paths that the current file will use when the pictures are attached. In other words, is there a way to import the pictures to the correct individuals, event's, sources, and so forth, a long with the paths that the pictures are in? A merge is out of the question; because there were some errors in the line numbers and they had to be corrected manually, and I believe those errors remain in the backup. Since we do have multimedia backups, it seems that there would be a way to bring the multimedia pictures into the current database if it has the same individuals, and events, sources, and so forth that use the same RIN, and MRIN numbers. Additional events and individuals that I have added to the new database did not include any pictures in them, so they would not be affected. Looking forward to some help, lots of help, any help. John Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Importing Pictures
Hi John, I think this is a lesson to do more regular backups. - but you've no doubt already learnt that one ;-) The backup saves the Family file with the knowledge of the picture links. The multimedia backup just saves the pictures, not the way they are linked to Legacy. There are two possibilities but depending on how many pictures or how many people you have modified data for, they may involve the same amount of work. 1. You could restore a backup with the pics attached and then do an Intellishare merge of your current file into that file. Only the people with new data should come up for merging. However, it may be that everyone that has any pictures will also be presented as that is also a change in the file. Import the file (ask for RINs to be renumbered from a number much greater than your largest RIN. Starting with say 20,001 means that the first numbers may reflect the old RIN - but whether or not that happens, you can see very clearly in the merge who came from which file.) Then use the special duplicate searches tab on the merge window and choose the Intellishare option 2. Or you need to reattach the pictures. On the positive side of reattaching pics, it does give you an opportunity to rethink how your pictures are stored and whether you want to move any, or rename any, or resize them (except for source pics, screen sized is enough for all uses made within Legacy. Also, if you attach through the Picture Centre, then you only have to add a description or caption once. Cheers, Cathy At 06:58 AM 7/05/2007, you wrote: Well I think I really screwed up, -big time... again! While working with my family file in legacy deluxe, I managed to delete all of the paths to the pictures and thereby eliminating the pictures within legacy. I know that they are still on the hard drive where they are supposed to be, I was able to reestablish the paths by simply importing it from a recent backup of multimedia. However, this did not import the pictures that were attached throughout the program. I know that I can go to the picture center and reattach all the pictures, one by one, by using a printout of the various paths, and names of the pictures from the backup, and then manually attaching them into my current file. I have done quite a bit of work repairing my current file, so, to go back to the backup file, and use it would be lot more work than trying to attach the pictures... I think. I try to import the multimedia into my current database, but I could not figure out how to do it so that it would attach all the pictures as they were attached in the backup. I hope I didn't confuse everybody too much, if not, then you can see my problem. The paths to the pictures in the backup file are the same paths that the current file will use when the pictures are attached. In other words, is there a way to import the pictures to the correct individuals, event's, sources, and so forth, a long with the paths that the pictures are in? A merge is out of the question; because there were some errors in the line numbers and they had to be corrected manually, and I believe those errors remain in the backup. Since we do have multimedia backups, it seems that there would be a way to bring the multimedia pictures into the current database if it has the same individuals, and events, sources, and so forth that use the same RIN, and MRIN numbers. Additional events and individuals that I have added to the new database did not include any pictures in them, so they would not be affected. Looking forward to some help, lots of help, any help. John Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Importing Pictures
John, If it's any consolation ... you are not the only one who did that! I ran the test all media paths after UNCHECKING the box to remove unreferenced pictures and it came up with the lost picture title ... and asked if the computer should search or me search. I selected to do the searching myself, as I knew exactly where it was. The nice thing that happened was when I found one picture in a certain file, all of the other pictures in that file were found by Legacy. Aparently I just pointed out to it where to look. I only use 3 separate files for my Legacy pictures ... it wasn't a hard job to fix my blunder! Toni - Original Message - From: John D. Taylor III [EMAIL PROTECTED] To: LegacyUserGroup LegacyUserGroup@legacyfamilytree.com Sent: Sunday, May 06, 2007 6:58 PM Subject: [LegacyUG] Importing Pictures Well I think I really screwed up, -big time... again! While working with my family file in legacy deluxe, I managed to delete all of the paths to the pictures and thereby eliminating the pictures within legacy. I know that they are still on the hard drive where they are supposed to be, I was able to reestablish the paths by simply importing it from a recent backup of multimedia. However, this did not import the pictures that were attached throughout the program. I know that I can go to the picture center and reattach all the pictures, one by one, by using a printout of the various paths, and names of the pictures from the backup, and then manually attaching them into my current file. I have done quite a bit of work repairing my current file, so, to go back to the backup file, and use it would be lot more work than trying to attach the pictures... I think. I try to import the multimedia into my current database, but I could not figure out how to do it so that it would attach all the pictures as they were attached in the backup. I hope I didn't confuse everybody too much, if not, then you can see my problem. The paths to the pictures in the backup file are the same paths that the current file will use when the pictures are attached. In other words, is there a way to import the pictures to the correct individuals, event's, sources, and so forth, a long with the paths that the pictures are in? A merge is out of the question; because there were some errors in the line numbers and they had to be corrected manually, and I believe those errors remain in the backup. Since we do have multimedia backups, it seems that there would be a way to bring the multimedia pictures into the current database if it has the same individuals, and events, sources, and so forth that use the same RIN, and MRIN numbers. Additional events and individuals that I have added to the new database did not include any pictures in them, so they would not be affected. Looking forward to some help, lots of help, any help. John Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Importing Pictures
Depending on how many different folders contain Legacy pictures, it may not be much effort at all to reattach/relink your pictures. If you have, say, 7 different folders that contain Legacy pictures, you would need to reattach/relink one picture from each of the 7 folders, or 7 pictures, and Legacy will then be able to find all the rest. This is my understanding and also seems to be my experience. Someone correct me if I am mistaken. On 5/6/07, tallen4 [EMAIL PROTECTED] wrote: John, If it's any consolation ... you are not the only one who did that! I ran the test all media paths after UNCHECKING the box to remove unreferenced pictures and it came up with the lost picture title ... and asked if the computer should search or me search. I selected to do the searching myself, as I knew exactly where it was. The nice thing that happened was when I found one picture in a certain file, all of the other pictures in that file were found by Legacy. Aparently I just pointed out to it where to look. I only use 3 separate files for my Legacy pictures ... it wasn't a hard job to fix my blunder! Toni - Original Message - From: John D. Taylor III [EMAIL PROTECTED] To: LegacyUserGroup LegacyUserGroup@legacyfamilytree.com Sent: Sunday, May 06, 2007 6:58 PM Subject: [LegacyUG] Importing Pictures Well I think I really screwed up, -big time... again! While working with my family file in legacy deluxe, I managed to delete all of the paths to the pictures and thereby eliminating the pictures within legacy. I know that they are still on the hard drive where they are supposed to be, I was able to reestablish the paths by simply importing it from a recent backup of multimedia. However, this did not import the pictures that were attached throughout the program. I know that I can go to the picture center and reattach all the pictures, one by one, by using a printout of the various paths, and names of the pictures from the backup, and then manually attaching them into my current file. I have done quite a bit of work repairing my current file, so, to go back to the backup file, and use it would be lot more work than trying to attach the pictures... I think. I try to import the multimedia into my current database, but I could not figure out how to do it so that it would attach all the pictures as they were attached in the backup. I hope I didn't confuse everybody too much, if not, then you can see my problem. The paths to the pictures in the backup file are the same paths that the current file will use when the pictures are attached. In other words, is there a way to import the pictures to the correct individuals, event's, sources, and so forth, a long with the paths that the pictures are in? A merge is out of the question; because there were some errors in the line numbers and they had to be corrected manually, and I believe those errors remain in the backup. Since we do have multimedia backups, it seems that there would be a way to bring the multimedia pictures into the current database if it has the same individuals, and events, sources, and so forth that use the same RIN, and MRIN numbers. Additional events and individuals that I have added to the new database did not include any pictures in them, so they would not be affected. Looking forward to some help, lots of help, any help. John Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Importing Pictures
I may not be right, but I understood from John that the photos themselves were in the places they used to be but that he's deleted the links in Legacy. You can do this from Options Customise - Locations Tab - Test all multimedia paths button then the Remove all picture ... files button. I'm not sure whether you can do it from elsewhere. If that is what he has done, the Legacy family file has no memory of ever having photos attached and the Picture Galleries will appear empty. If Legacy simply can't find the photos, then the Picture Galleries will have a series of question marks in them and your solution will work. Cathy At 08:24 AM 7/05/2007, you wrote: Depending on how many different folders contain Legacy pictures, it may not be much effort at all to reattach/relink your pictures. If you have, say, 7 different folders that contain Legacy pictures, you would need to reattach/relink one picture from each of the 7 folders, or 7 pictures, and Legacy will then be able to find all the rest. This is my understanding and also seems to be my experience. Someone correct me if I am mistaken. Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
RE: [LegacyUG] Importing Pictures
Another way I've used is to go to Options, then Customise, Locations and click on View Current List of Multimedia Locations. If you know where your picture files are, no matter how many, then you can add that directory or edit what is there. Don't forget to click Save before exiting Options HTH Tom -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of leo macdonald Sent: Monday, 7 May 2007 11:13 AM To: LegacyUserGroup@legacyfamilytree.com Subject: RE: [LegacyUG] Importing Pictures Hi John, I think that you can go to your backup multimedia file, copy it to another place like the Legacy Pictures folder, expand it, now go to your legacy program, go to a person that you know has a picture attached (maybe yourself), click on the picture icon of yourself, a screen will come up, select search for the picture yourself, go to c drive, legacy, pictures, scroll to the picture of yourself and select it. the rest of the pictures should now be automatically attached. Hope this works, Leo From: John D. Taylor III [EMAIL PROTECTED] Reply-To: LegacyUserGroup@legacyfamilytree.com To: LegacyUserGroup LegacyUserGroup@legacyfamilytree.com Subject: [LegacyUG] Importing Pictures Date: Sun, 06 May 2007 18:58:29 -0400 Well I think I really screwed up, -big time... again! While working with my family file in legacy deluxe, I managed to delete all of the paths to the pictures and thereby eliminating the pictures within legacy. I know that they are still on the hard drive where they are supposed to be, I was able to reestablish the paths by simply importing it from a recent backup of multimedia. However, this did not import the pictures that were attached throughout the program. I know that I can go to the picture center and reattach all the pictures, one by one, by using a printout of the various paths, and names of the pictures from the backup, and then manually attaching them into my current file. I have done quite a bit of work repairing my current file, so, to go back to the backup file, and use it would be lot more work than trying to attach the pictures... I think. I try to import the multimedia into my current database, but I could not figure out how to do it so that it would attach all the pictures as they were attached in the backup. I hope I didn't confuse everybody too much, if not, then you can see my problem. The paths to the pictures in the backup file are the same paths that the current file will use when the pictures are attached. In other words, is there a way to import the pictures to the correct individuals, event's, sources, and so forth, a long with the paths that the pictures are in? A merge is out of the question; because there were some errors in the line numbers and they had to be corrected manually, and I believe those errors remain in the backup. Since we do have multimedia backups, it seems that there would be a way to bring the multimedia pictures into the current database if it has the same individuals, and events, sources, and so forth that use the same RIN, and MRIN numbers. Additional events and individuals that I have added to the new database did not include any pictures in them, so they would not be affected. Looking forward to some help, lots of help, any help. John Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp -- I am using the free version of SPAMfighter for private users. It has removed 153 spam emails to date. Paying users do not have this message in their emails. Get the free SPAMfighter here: http://www.spamfighter.com/len Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at:
Re: [LegacyUG] Sources for narratives in notes
In the way you describe, your sources will be clumped together in a seeming random order. But if you instead create a timeline with each of the source items as an Event, they should come out cleaner and in your order. This way each person in the same event can be handled the same. Just a suggestion. Good luck in any case. Rich in LA CA --- Diane Murach [EMAIL PROTECTED] wrote: I want to write a biographical narrative for each ancestor in Notes. Let's say the information came from ten different sources. Can I source each specific fact in Notes or would there be a list of all sources used which made up the entire content of the narrative? What do people do so the source of each piece of information is apparent to readers? Thanks, Diane Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
[LegacyUG] Ancestor Colour Coding
Hi Listers I'm using 6 deluxe version build 6.0.0.127 and have added some ancestors in my direct line, yet the Ancestor colour coding is not displaying correctly on either the Family View or Pedigree View. Any ancestor added prior to this build display colour codes correctly. The relationship on the screen appears correctly in the Family View and the people appear in my Pedigree View, but with no colour displays in the Ancestor colour coding box beside their names. When I click on the Ancestor colour box at side of an individual name on Family View or Pedigree View screen a box appears Not In Current Ancestor Line yet my view shows me that he/she is a grandparent with the correct numbering of generations removed in Family View. My file goes through Check/Repair with no errors and my display for Ancestor Colour Coding is checked as on. Any ideas on what's happening? Cheers Tracy Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Ancestor Colour Coding
I don't use it myself, but if I remember you might do file maintenance to add them, or re-choose the same starting person, which should pick up known relatives (including new ones). This should fix it. Rich in LA CA --- Tracy Skegg [EMAIL PROTECTED] wrote: Hi Listers I'm using 6 deluxe version build 6.0.0.127 and have added some ancestors in my direct line, yet the Ancestor colour coding is not displaying correctly on either the Family View or Pedigree View. Any ancestor added prior to this build display colour codes correctly. The relationship on the screen appears correctly in the Family View and the people appear in my Pedigree View, but with no colour displays in the Ancestor colour coding box beside their names. When I click on the Ancestor colour box at side of an individual name on Family View or Pedigree View screen a box appears Not In Current Ancestor Line yet my view shows me that he/she is a grandparent with the correct numbering of generations removed in Family View. My file goes through Check/Repair with no errors and my display for Ancestor Colour Coding is checked as on. Any ideas on what's happening? Cheers Tracy Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
