Re: [LegacyUG] Installing & Running Legacy using Parallels v14.0.0
Thank you once again for that., shall keep that in mind This group is so helpful and I appreciate the time you give Regards Gwen On Fri, Aug 31, 2018 at 1:40 PM Leon Chapman wrote: > You need to run Windows in the isolated mode from the Mac side. Then, the > file locations for Legacy are just like a standard Windows only machine. > > If you do not isolate Windows from the Mac side, Legacy will try to find > files on a network and you will have problems. > > Sent from my iPhone > Leon Chapman > chap...@gmail.com > 623-271-1206 <(623)%20271-1206> > > On Aug 30, 2018, at 5:37 PM, Noddie <7thwav...@gmail.com> wrote: > > That sounds really good would you mind clarifying the following for me > (Virtual Machine > Configure… > Options > Security > check on Isolate Mac > from Windows)I > and do I need to go back in after installation and reverse these steps > above? or leave them as they are > Many thanks > Cheers > > On Fri, Aug 31, 2018 at 7:02 AM Leon Chapman wrote: > >> Ok, I have a new update on the Legacy 9 install on Parallels 14. >> >> On my iMac which did not have Legacy 9 GR or Legacy 9 Beta installed -- >> >> I downgraded from Parallels 14 to 13.3.2 – you just download their >> install file for v13.3.2 and reinstall over v14. >> >> Using Parallels 13.3.2: >> 1. I installed Legacy GR - 9.0.0.226 >> a. It again stopped about 92% thru the install process and the process >> became unresponsive >> b. I left the installer process open for about 10 minutes, and it finally >> finished the install. >> c. Legacy 9 GR is running just fine under Parallels 14.0.0. >> >> Next, I reinstalled Parallels 14.0.0 from scratch over Parallels 13.3.2 >> 1. I then installed the Legacy Beta – 9.0.0.253 >> a. The install went perfect – no delays during install >> b. Legacy Beta 9.0.0.253 is running just fine. >> >> I then went to my MacBook Pro – It had Parallels 13.3.2 installed and had >> Legacy Beta installed. >> 1. I upgraded to Parallels 14.0.0 >> 2. This Windows VM already had Legacy 9 Beta 9.0.0.253 installed >> 3. Legacy is running just fine. >> >> Bottom line, it is ok for everyone to install Parallels 14.0.0 if they >> choose. >> Legacy should install and run just fine, just give it some time to finish >> the install process if it stops during the install. >> >> Another side note: Be sure to Isolate Windows from the Mac or you will >> have problems with file locations that act like you are running Legacy on a >> network and it cannot find file locations. Here is how to Isolate Windows >> from Mac to exclude Mac OS X influence: >> >> (Virtual Machine > Configure… > Options > Security > check on Isolate Mac >> from Windows) >> >> If you have problems with Legacy install, here is a Parallels Help page: >> https://kb.parallels.com/112983 >> >> Good luck with using Parallels 14.0.0 on the Mac! >> ___ >> Leon Chapman >> chap...@gmail.com >> - >> -- >> >> LegacyUserGroup mailing list >> LegacyUserGroup@legacyusers.com >> To manage your subscription and unsubscribe >> http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com >> Archives at: >> http://www.mail-archive.com/legacyusergroup@legacyusers.com/ >> > -- > > LegacyUserGroup mailing list > LegacyUserGroup@legacyusers.com > To manage your subscription and unsubscribe > http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com > Archives at: > http://www.mail-archive.com/legacyusergroup@legacyusers.com/ > > -- > > LegacyUserGroup mailing list > LegacyUserGroup@legacyusers.com > To manage your subscription and unsubscribe > http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com > Archives at: > http://www.mail-archive.com/legacyusergroup@legacyusers.com/ > -- LegacyUserGroup mailing list LegacyUserGroup@legacyusers.com To manage your subscription and unsubscribe http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com Archives at: http://www.mail-archive.com/legacyusergroup@legacyusers.com/
Re: [LegacyUG] Installing & Running Legacy using Parallels v14.0.0
You need to run Windows in the isolated mode from the Mac side. Then, the file locations for Legacy are just like a standard Windows only machine. If you do not isolate Windows from the Mac side, Legacy will try to find files on a network and you will have problems. Sent from my iPhone Leon Chapman chap...@gmail.com 623-271-1206 > On Aug 30, 2018, at 5:37 PM, Noddie <7thwav...@gmail.com> wrote: > > That sounds really good would you mind clarifying the following for me > (Virtual Machine > Configure… > Options > Security > check on Isolate Mac > from Windows)I > and do I need to go back in after installation and reverse these steps above? > or leave them as they are > Many thanks > Cheers > >> On Fri, Aug 31, 2018 at 7:02 AM Leon Chapman wrote: >> Ok, I have a new update on the Legacy 9 install on Parallels 14. >> >> On my iMac which did not have Legacy 9 GR or Legacy 9 Beta installed -- >> >> I downgraded from Parallels 14 to 13.3.2 – you just download their install >> file for v13.3.2 and reinstall over v14. >> >> Using Parallels 13.3.2: >> 1. I installed Legacy GR - 9.0.0.226 >> a. It again stopped about 92% thru the install process and the process >> became unresponsive >> b. I left the installer process open for about 10 minutes, and it finally >> finished the install. >> c. Legacy 9 GR is running just fine under Parallels 14.0.0. >> >> Next, I reinstalled Parallels 14.0.0 from scratch over Parallels 13.3.2 >> 1. I then installed the Legacy Beta – 9.0.0.253 >> a. The install went perfect – no delays during install >> b. Legacy Beta 9.0.0.253 is running just fine. >> >> I then went to my MacBook Pro – It had Parallels 13.3.2 installed and had >> Legacy Beta installed. >> 1. I upgraded to Parallels 14.0.0 >> 2. This Windows VM already had Legacy 9 Beta 9.0.0.253 installed >> 3. Legacy is running just fine. >> >> Bottom line, it is ok for everyone to install Parallels 14.0.0 if they >> choose. >> Legacy should install and run just fine, just give it some time to finish >> the install process if it stops during the install. >> >> Another side note: Be sure to Isolate Windows from the Mac or you will have >> problems with file locations that act like you are running Legacy on a >> network and it cannot find file locations. Here is how to Isolate Windows >> from Mac to exclude Mac OS X influence: >> >> (Virtual Machine > Configure… > Options > Security > check on Isolate Mac >> from Windows) >> >> If you have problems with Legacy install, here is a Parallels Help page: >> https://kb.parallels.com/112983 >> >> Good luck with using Parallels 14.0.0 on the Mac! >> ___ >> Leon Chapman >> chap...@gmail.com >> - >> -- >> >> LegacyUserGroup mailing list >> LegacyUserGroup@legacyusers.com >> To manage your subscription and unsubscribe >> http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com >> Archives at: >> http://www.mail-archive.com/legacyusergroup@legacyusers.com/ > -- > > LegacyUserGroup mailing list > LegacyUserGroup@legacyusers.com > To manage your subscription and unsubscribe > http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com > Archives at: > http://www.mail-archive.com/legacyusergroup@legacyusers.com/ -- LegacyUserGroup mailing list LegacyUserGroup@legacyusers.com To manage your subscription and unsubscribe http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com Archives at: http://www.mail-archive.com/legacyusergroup@legacyusers.com/
Re: [LegacyUG] Installing & Running Legacy using Parallels v14.0.0
That sounds really good would you mind clarifying the following for me (Virtual Machine > Configure… > Options > Security > check on Isolate Mac from Windows)I and do I need to go back in after installation and reverse these steps above? or leave them as they are Many thanks Cheers On Fri, Aug 31, 2018 at 7:02 AM Leon Chapman wrote: > Ok, I have a new update on the Legacy 9 install on Parallels 14. > > On my iMac which did not have Legacy 9 GR or Legacy 9 Beta installed -- > > I downgraded from Parallels 14 to 13.3.2 – you just download their install > file for v13.3.2 and reinstall over v14. > > Using Parallels 13.3.2: > 1. I installed Legacy GR - 9.0.0.226 > a. It again stopped about 92% thru the install process and the process > became unresponsive > b. I left the installer process open for about 10 minutes, and it finally > finished the install. > c. Legacy 9 GR is running just fine under Parallels 14.0.0. > > Next, I reinstalled Parallels 14.0.0 from scratch over Parallels 13.3.2 > 1. I then installed the Legacy Beta – 9.0.0.253 > a. The install went perfect – no delays during install > b. Legacy Beta 9.0.0.253 is running just fine. > > I then went to my MacBook Pro – It had Parallels 13.3.2 installed and had > Legacy Beta installed. > 1. I upgraded to Parallels 14.0.0 > 2. This Windows VM already had Legacy 9 Beta 9.0.0.253 installed > 3. Legacy is running just fine. > > Bottom line, it is ok for everyone to install Parallels 14.0.0 if they > choose. > Legacy should install and run just fine, just give it some time to finish > the install process if it stops during the install. > > Another side note: Be sure to Isolate Windows from the Mac or you will > have problems with file locations that act like you are running Legacy on a > network and it cannot find file locations. Here is how to Isolate Windows > from Mac to exclude Mac OS X influence: > > (Virtual Machine > Configure… > Options > Security > check on Isolate Mac > from Windows) > > If you have problems with Legacy install, here is a Parallels Help page: > https://kb.parallels.com/112983 > > Good luck with using Parallels 14.0.0 on the Mac! > ___ > Leon Chapman > chap...@gmail.com > - > -- > > LegacyUserGroup mailing list > LegacyUserGroup@legacyusers.com > To manage your subscription and unsubscribe > http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com > Archives at: > http://www.mail-archive.com/legacyusergroup@legacyusers.com/ > -- LegacyUserGroup mailing list LegacyUserGroup@legacyusers.com To manage your subscription and unsubscribe http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com Archives at: http://www.mail-archive.com/legacyusergroup@legacyusers.com/
[LegacyUG] Installing & Running Legacy using Parallels v14.0.0
Ok, I have a new update on the Legacy 9 install on Parallels 14. On my iMac which did not have Legacy 9 GR or Legacy 9 Beta installed -- I downgraded from Parallels 14 to 13.3.2 – you just download their install file for v13.3.2 and reinstall over v14. Using Parallels 13.3.2: 1. I installed Legacy GR - 9.0.0.226 a. It again stopped about 92% thru the install process and the process became unresponsive b. I left the installer process open for about 10 minutes, and it finally finished the install. c. Legacy 9 GR is running just fine under Parallels 14.0.0. Next, I reinstalled Parallels 14.0.0 from scratch over Parallels 13.3.2 1. I then installed the Legacy Beta – 9.0.0.253 a. The install went perfect – no delays during install b. Legacy Beta 9.0.0.253 is running just fine. I then went to my MacBook Pro – It had Parallels 13.3.2 installed and had Legacy Beta installed. 1. I upgraded to Parallels 14.0.0 2. This Windows VM already had Legacy 9 Beta 9.0.0.253 installed 3. Legacy is running just fine. Bottom line, it is ok for everyone to install Parallels 14.0.0 if they choose. Legacy should install and run just fine, just give it some time to finish the install process if it stops during the install. Another side note: Be sure to Isolate Windows from the Mac or you will have problems with file locations that act like you are running Legacy on a network and it cannot find file locations. Here is how to Isolate Windows from Mac to exclude Mac OS X influence: (Virtual Machine > Configure… > Options > Security > check on Isolate Mac from Windows) If you have problems with Legacy install, here is a Parallels Help page: https://kb.parallels.com/112983 Good luck with using Parallels 14.0.0 on the Mac! ___ Leon Chapman chap...@gmail.com - -- LegacyUserGroup mailing list LegacyUserGroup@legacyusers.com To manage your subscription and unsubscribe http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com Archives at: http://www.mail-archive.com/legacyusergroup@legacyusers.com/
