Re: [PATCH] OMAP4: MMC: fix power and audio issue, decouple USBC1 from MMC1
Hi Tony, Can you queue this patch ? On Fri, Sep 9, 2011 at 7:34 PM, T Krishnamoorthy, Balaji balaj...@ti.com wrote: On Fri, Aug 12, 2011 at 8:43 PM, Buckley, Bryan bryan.buck...@ti.com wrote: On Fri, Jul 22, 2011 at 7:30 AM, Kishore Kadiyala kishorek.kadiy...@gmail.com wrote: On Fri, Jul 22, 2011 at 12:59 AM, Bryan Buckley bryan.buck...@ti.com wrote: Remove OMAP4_USBC1_ICUSB_PWRDNZ_MASK during enable/disable PWRDNZ mode for MMC1_PBIAS and associated extended-drain MMC1 I/O cell. This is in accordance with the control module programming guide. This fixes a bug where if trying to use gpio_98 or gpio_99 and MMC1 at the same time the GPIO signal will be affected by a changing SDMMC1_VDDS. Software must keep MMC1_PBIAS cell and MMC1_IO cell PWRDNZ signals low whenever SDMMC1_VDDS ramps up/down or changes for cell protection purposes. MMC1 is based on SDMMC1_VDDS whereas USBC1 is based on SIM_VDDS therefore they can operate independently. Signed-off-by: Bryan Buckley bryan.buck...@ti.com Good catch, Acked-by: Kishore Kadiyala kishore.kadiy...@ti.com Any other comments from anyone else? Noticed that this commit isn't in any upstream branches. This patch will fix issues with people who want to use GPIO 98/99 AND MMC1 at the same time. Would be good to have this fix upstream. FWIW: Tested on OMAP4 Blaze Tested-by: Balaji T K balaj...@ti.com -- To unsubscribe from this list: send the line unsubscribe linux-mmc in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH] OMAP4: MMC: fix power and audio issue, decouple USBC1 from MMC1
* T Krishnamoorthy, Balaji balaj...@ti.com [110928 05:00]: Hi Tony, Can you queue this patch ? Thanks, adding into fixes. Tony On Fri, Sep 9, 2011 at 7:34 PM, T Krishnamoorthy, Balaji balaj...@ti.com wrote: On Fri, Aug 12, 2011 at 8:43 PM, Buckley, Bryan bryan.buck...@ti.com wrote: On Fri, Jul 22, 2011 at 7:30 AM, Kishore Kadiyala kishorek.kadiy...@gmail.com wrote: On Fri, Jul 22, 2011 at 12:59 AM, Bryan Buckley bryan.buck...@ti.com wrote: Remove OMAP4_USBC1_ICUSB_PWRDNZ_MASK during enable/disable PWRDNZ mode for MMC1_PBIAS and associated extended-drain MMC1 I/O cell. This is in accordance with the control module programming guide. This fixes a bug where if trying to use gpio_98 or gpio_99 and MMC1 at the same time the GPIO signal will be affected by a changing SDMMC1_VDDS. Software must keep MMC1_PBIAS cell and MMC1_IO cell PWRDNZ signals low whenever SDMMC1_VDDS ramps up/down or changes for cell protection purposes. MMC1 is based on SDMMC1_VDDS whereas USBC1 is based on SIM_VDDS therefore they can operate independently. Signed-off-by: Bryan Buckley bryan.buck...@ti.com Good catch, Acked-by: Kishore Kadiyala kishore.kadiy...@ti.com Any other comments from anyone else? Noticed that this commit isn't in any upstream branches. This patch will fix issues with people who want to use GPIO 98/99 AND MMC1 at the same time. Would be good to have this fix upstream. FWIW: Tested on OMAP4 Blaze Tested-by: Balaji T K balaj...@ti.com -- To unsubscribe from this list: send the line unsubscribe linux-mmc in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH] OMAP4: MMC: fix power and audio issue, decouple USBC1 from MMC1
On Fri, Jul 22, 2011 at 7:30 AM, Kishore Kadiyala kishorek.kadiy...@gmail.com wrote: On Fri, Jul 22, 2011 at 12:59 AM, Bryan Buckley bryan.buck...@ti.com wrote: Remove OMAP4_USBC1_ICUSB_PWRDNZ_MASK during enable/disable PWRDNZ mode for MMC1_PBIAS and associated extended-drain MMC1 I/O cell. This is in accordance with the control module programming guide. This fixes a bug where if trying to use gpio_98 or gpio_99 and MMC1 at the same time the GPIO signal will be affected by a changing SDMMC1_VDDS. Software must keep MMC1_PBIAS cell and MMC1_IO cell PWRDNZ signals low whenever SDMMC1_VDDS ramps up/down or changes for cell protection purposes. MMC1 is based on SDMMC1_VDDS whereas USBC1 is based on SIM_VDDS therefore they can operate independently. Signed-off-by: Bryan Buckley bryan.buck...@ti.com Good catch, Acked-by: Kishore Kadiyala kishore.kadiy...@ti.com Any other comments from anyone else? Noticed that this commit isn't in any upstream branches. This patch will fix issues with people who want to use GPIO 98/99 AND MMC1 at the same time. Would be good to have this fix upstream. -- To unsubscribe from this list: send the line unsubscribe linux-mmc in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH] OMAP4: MMC: fix power and audio issue, decouple USBC1 from MMC1
On Fri, Jul 22, 2011 at 12:59 AM, Bryan Buckley bryan.buck...@ti.com wrote: Remove OMAP4_USBC1_ICUSB_PWRDNZ_MASK during enable/disable PWRDNZ mode for MMC1_PBIAS and associated extended-drain MMC1 I/O cell. This is in accordance with the control module programming guide. This fixes a bug where if trying to use gpio_98 or gpio_99 and MMC1 at the same time the GPIO signal will be affected by a changing SDMMC1_VDDS. Software must keep MMC1_PBIAS cell and MMC1_IO cell PWRDNZ signals low whenever SDMMC1_VDDS ramps up/down or changes for cell protection purposes. MMC1 is based on SDMMC1_VDDS whereas USBC1 is based on SIM_VDDS therefore they can operate independently. Signed-off-by: Bryan Buckley bryan.buck...@ti.com Good catch, Acked-by: Kishore Kadiyala kishore.kadiy...@ti.com --- arch/arm/mach-omap2/hsmmc.c | 12 1 files changed, 4 insertions(+), 8 deletions(-) diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index 3842405..a6135df 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -144,8 +144,7 @@ static void omap4_hsmmc1_before_set_reg(struct device *dev, int slot, */ reg = omap4_ctrl_pad_readl(control_pbias_offset); reg = ~(OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK | - OMAP4_MMC1_PWRDNZ_MASK | - OMAP4_USBC1_ICUSB_PWRDNZ_MASK); + OMAP4_MMC1_PWRDNZ_MASK); omap4_ctrl_pad_writel(reg, control_pbias_offset); } @@ -165,8 +164,7 @@ static void omap4_hsmmc1_after_set_reg(struct device *dev, int slot, else reg |= OMAP4_MMC1_PBIASLITE_VMODE_MASK; reg |= (OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK | - OMAP4_MMC1_PWRDNZ_MASK | - OMAP4_USBC1_ICUSB_PWRDNZ_MASK); + OMAP4_MMC1_PWRDNZ_MASK); omap4_ctrl_pad_writel(reg, control_pbias_offset); /* 4 microsec delay for comparator to generate an error*/ udelay(4); @@ -174,16 +172,14 @@ static void omap4_hsmmc1_after_set_reg(struct device *dev, int slot, if (reg OMAP4_MMC1_PBIASLITE_VMODE_ERROR_MASK) { pr_err(Pbias Voltage is not same as LDO\n); /* Caution : On VMODE_ERROR Power Down MMC IO */ - reg = ~(OMAP4_MMC1_PWRDNZ_MASK | - OMAP4_USBC1_ICUSB_PWRDNZ_MASK); + reg = ~(OMAP4_MMC1_PWRDNZ_MASK); omap4_ctrl_pad_writel(reg, control_pbias_offset); } } else { reg = omap4_ctrl_pad_readl(control_pbias_offset); reg |= (OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK | OMAP4_MMC1_PWRDNZ_MASK | - OMAP4_MMC1_PBIASLITE_VMODE_MASK | - OMAP4_USBC1_ICUSB_PWRDNZ_MASK); + OMAP4_MMC1_PBIASLITE_VMODE_MASK); omap4_ctrl_pad_writel(reg, control_pbias_offset); } } -- 1.7.0.4 -- To unsubscribe from this list: send the line unsubscribe linux-mmc in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line unsubscribe linux-mmc in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
[PATCH] OMAP4: MMC: fix power and audio issue, decouple USBC1 from MMC1
Remove OMAP4_USBC1_ICUSB_PWRDNZ_MASK during enable/disable PWRDNZ mode for MMC1_PBIAS and associated extended-drain MMC1 I/O cell. This is in accordance with the control module programming guide. This fixes a bug where if trying to use gpio_98 or gpio_99 and MMC1 at the same time the GPIO signal will be affected by a changing SDMMC1_VDDS. Software must keep MMC1_PBIAS cell and MMC1_IO cell PWRDNZ signals low whenever SDMMC1_VDDS ramps up/down or changes for cell protection purposes. MMC1 is based on SDMMC1_VDDS whereas USBC1 is based on SIM_VDDS therefore they can operate independently. Signed-off-by: Bryan Buckley bryan.buck...@ti.com --- arch/arm/mach-omap2/hsmmc.c | 12 1 files changed, 4 insertions(+), 8 deletions(-) diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index 3842405..a6135df 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -144,8 +144,7 @@ static void omap4_hsmmc1_before_set_reg(struct device *dev, int slot, */ reg = omap4_ctrl_pad_readl(control_pbias_offset); reg = ~(OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK | - OMAP4_MMC1_PWRDNZ_MASK | - OMAP4_USBC1_ICUSB_PWRDNZ_MASK); + OMAP4_MMC1_PWRDNZ_MASK); omap4_ctrl_pad_writel(reg, control_pbias_offset); } @@ -165,8 +164,7 @@ static void omap4_hsmmc1_after_set_reg(struct device *dev, int slot, else reg |= OMAP4_MMC1_PBIASLITE_VMODE_MASK; reg |= (OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK | - OMAP4_MMC1_PWRDNZ_MASK | - OMAP4_USBC1_ICUSB_PWRDNZ_MASK); + OMAP4_MMC1_PWRDNZ_MASK); omap4_ctrl_pad_writel(reg, control_pbias_offset); /* 4 microsec delay for comparator to generate an error*/ udelay(4); @@ -174,16 +172,14 @@ static void omap4_hsmmc1_after_set_reg(struct device *dev, int slot, if (reg OMAP4_MMC1_PBIASLITE_VMODE_ERROR_MASK) { pr_err(Pbias Voltage is not same as LDO\n); /* Caution : On VMODE_ERROR Power Down MMC IO */ - reg = ~(OMAP4_MMC1_PWRDNZ_MASK | - OMAP4_USBC1_ICUSB_PWRDNZ_MASK); + reg = ~(OMAP4_MMC1_PWRDNZ_MASK); omap4_ctrl_pad_writel(reg, control_pbias_offset); } } else { reg = omap4_ctrl_pad_readl(control_pbias_offset); reg |= (OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK | OMAP4_MMC1_PWRDNZ_MASK | - OMAP4_MMC1_PBIASLITE_VMODE_MASK | - OMAP4_USBC1_ICUSB_PWRDNZ_MASK); + OMAP4_MMC1_PBIASLITE_VMODE_MASK); omap4_ctrl_pad_writel(reg, control_pbias_offset); } } -- 1.7.0.4 -- To unsubscribe from this list: send the line unsubscribe linux-mmc in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html