Re: compiling kde3
On Friday 15 March 2002 6:40 am, Keith Antoine wrote: Something just struck me, is it not there because they are yusing the full qt-3.0.2 now rather than qt-copy. However where can one get the last issued qt-copy from or is this academic now. The qt-copy module in cvs is there now, I updated a few minutes ago, but I understand that it was changed (again!) yesterday so maybe it was temporarily unavailable. It is supposed to be very close to the Trolls' next release; 3.0.3. Have a nice evening. Pam -- Linux Step by Step (UK mirror): http://www.pam.roberts.btinternet.co.uk/sxs/ ___ Linux-users mailing list - http://linux-sxs.org/mailman/listinfo/linux-users Subscribe/Unsubscribe info, Archives,and Digests are located at the above URL.
Re: gentoo news and ramblings
On Fri, 15 Mar 2002 12:53:26 -0700 Collins [EMAIL PROTECTED] wrote: Well, I haven't sent out any gentoo propaganda in a while, so here goes. A few after thoughts: 1) Boy did I leave the typos in that one! Those guys who complained about one typo in the elx installer will send this directly to the plonk file grin 2) gentoo is still officially billed as a distro for sysadmins. Nevertheless, a lot of sheer newbies are trying it lately, mostly with success. If you have been lurking on this list for a while, know how to partition a disk, and know how to add a user to your system and change your password (or at least how to read the man files, since I can never remember that trick very long), you can do this, too. 3) I'm currently using about 1.5 Gig out of a 5 Gig partition, and I have gnome, kde, and OpenOffice, Netscape, and Mozilla installed (all big hitters for space), so I have lots of room to grow. gentoo leaves the source (.tbz files) for all installs onboard, but you can remove them manually, as I have done. I would recommend 3-4 Gig for your install. Enjoy, -- Collins Richey - Denver Area - WWTLRD? Gentoo_rc6-15 2.4.17 - xfce + sylpheed + mozilla + oo641C ___ Linux-users mailing list - http://linux-sxs.org/mailman/listinfo/linux-users Subscribe/Unsubscribe info, Archives,and Digests are located at the above URL.
Re: Alarm
Don't feel bad G! Shawn Tayler wrote: On Fri, 15 Mar 2002 22:44:08 -0600, Brett I. Holcomb wrote: If you mean the KOrganizer then open it, go to Settings/Configure Korganizer and uncheck Start alarm daemons or something similar. Then click OK and close KOrganizer. DOH! Man I feel real stupid right now.. stayler -- Brett I. Holcomb [EMAIL PROTECTED] AKA Grunt Registered Linux User #188143 Remove R777 to email ___ Linux-users mailing list - http://linux-sxs.org/mailman/listinfo/linux-users Subscribe/Unsubscribe info, Archives,and Digests are located at the above URL.
Re: gentoo news and ramblings
On Sat, 16 Mar 2002 09:55:19 -0500 Bill Davidson [EMAIL PROTECTED] wrote: On Friday 15 March 2002 11:34 pm, Rick Sivernell wrote: Collins Nice job, lots of good stuff. I love this xfce, and things made by kde even work better. Sooner or later I will get around to building a desceant IDE system for c++ java python scripts. In the process of some lower level stuff now. But this cillege degree crap is cramping my real love, software development my wife. cheers Do they teach you to spell in cillegeg I thank I fayulled that kourse g -- Collins Richey - Denver Area - WWTLRD? Gentoo_rc6-15 2.4.17 - xfce + sylpheed + mozilla ___ Linux-users mailing list - http://linux-sxs.org/mailman/listinfo/linux-users Subscribe/Unsubscribe info, Archives,and Digests are located at the above URL.
Re: compiling kde3
On Saturday 16 March 2002 07:46 pm, you wrote: On Friday 15 March 2002 6:40 am, Keith Antoine wrote: Something just struck me, is it not there because they are yusing the full qt-3.0.2 now rather than qt-copy. However where can one get the last issued qt-copy from or is this academic now. The qt-copy module in cvs is there now, I updated a few minutes ago, but I understand that it was changed (again!) yesterday so maybe it was temporarily unavailable. It is supposed to be very close to the Trolls' next release; 3.0.3. Have a nice evening. Pam Hey this is wierd Pam, I just went to kde.org /pub/kde/unstable/CVS/snapshots/current and downloaded 20020313 but there was no qt-copy ?? Where is it supposed to be ? -- Keith Antoine (GANDALF) aka 'skippy' 18 Arkana St, The Gap, Queensland 4061 Australia PH:61733002161 Retired Geriatric, Sometime Electronics Engineer, Knowall, Brain in storage ___ Linux-users mailing list - http://linux-sxs.org/mailman/listinfo/linux-users Subscribe/Unsubscribe info, Archives,and Digests are located at the above URL.
Good linux compatible sound card
Can someone recommend a really nice, high quality sound card for linux? Thanks, Joel ___ Linux-users mailing list - http://linux-sxs.org/mailman/listinfo/linux-users Subscribe/Unsubscribe info, Archives,and Digests are located at the above URL.
Partition sizes
Just installed RH 7.1 and let the automatic installer do it as a server but with no graphical thingees (KDE, etc). Here is the partition table it set up: FilesystemSize Used Avail Use% Mounted on /dev/hda8 251M 49M 189M 21% / /dev/hda1 53M 3.4M 47M 7% /boot /dev/hda6 13G 48k 11G 1% /home /dev/hda5 13G 424M 11G 4% /usr /dev/hda7 251M 16M 221M 7% /var This seems odd, seeing as /opt and /tmp are on hda8, which is quite small, and /var, which can get quite big, is also a small partition. This seems odd. Does anyone know why Redhat does this? Joel ___ Linux-users mailing list - http://linux-sxs.org/mailman/listinfo/linux-users Subscribe/Unsubscribe info, Archives,and Digests are located at the above URL.
The SxS is Project of the Week
If you'll all take a moment to check http://www.linuxandmain.com/features/sxs.html you'll see that our little community has been chosen as Project of the Week by linuxandmain.com ! Kudos to all of you who help make this site what it is. This recognition belongs to all of you. -- Douglas J Hunley (doug at hunley.homeip.net) - Linux User #174778 Admin: Linux StepByStep - http://www.linux-sxs.org and http://jobs.linux-sxs.org panic(Fod fight!); 2.2.16 /usr/src/linux/drivers/scsi/aha1542.c ___ Linux-users mailing list - http://linux-sxs.org/mailman/listinfo/linux-users Subscribe/Unsubscribe info, Archives,and Digests are located at the above URL.
Re: Good linux compatible sound card
Turtle Beach Santa Cruz worked out of the box for me. Rick Sivernell wrote: ESS, SoundBlaster any -- Brett I. Holcomb [EMAIL PROTECTED] AKA Grunt Registered Linux User #188143 Remove R777 to email ___ Linux-users mailing list - http://linux-sxs.org/mailman/listinfo/linux-users Subscribe/Unsubscribe info, Archives,and Digests are located at the above URL.
trying to instll MPLayer in eServer 3.1.1
Yes I have read all the manual plus the faq and installed all that I could that is needed for MPlayer but I am getting the following during 'make'. I have no idea whats causing the error, someone else might, SDL is in /usr/local/lib:: lrwxrwxrwx1 root root 19 Mar 16 08:13 /usr/local/lib/libSDL-1.2.so.0 - libSDL-1.2.so.0.0.3 -rwxr-xr-x1 root root 1157876 Mar 16 08:13 /usr/local/lib/libSDL-1.2.so.0.0.3 -rw-r--r--1 root root 3997884 Mar 16 08:13 /usr/local/lib/libSDL.a -rwxr-xr-x1 root root 759 Mar 16 08:13 /usr/local/lib/libSDL.la-rw-r--r--1 root root 2518 Mar 16 08:13 /usr/local/lib/libSDLmain.a lrwxrwxrwx1 root root 19 Mar 16 08:13 /usr/local/lib/libSDL.so - libSDL-1.2.so.0.0.3 However it relates to esdaudio and I also have installed esound-0.2.8, however i have not been able to install mple-1.8.1, do not know if this is required though. I am dead brained when it comes to programming of any sort. help appreciated... ma -lmad -lnsl-L/usr/lib -Wl,-rpath,/usr/lib -lSDL -lpthread -laa -Lvidix -lvidix -LGui -lgui /usr/lib/libSDL.a(SDL_esdaudio.lo): In function `Audio_Available': SDL_esdaudio.lo(.text+0x1c): undefined reference to `esd_open_sound' SDL_esdaudio.lo(.text+0x31): undefined reference to `esd_close' /usr/lib/libSDL.a(SDL_esdaudio.lo): In function `ESD_OpenAudio': SDL_esdaudio.lo(.text+0x452): undefined reference to `esd_play_stream' /usr/lib/libSDL.a(SDL_x11dga.lo): In function `X11_EnableDGAMouse': SDL_x11dga.lo(.text+0xc6): undefined reference to `XF86DGAQueryExtension' SDL_x11dga.lo(.text+0xea): undefined reference to `XF86DGAQueryVersion' SDL_x11dga.lo(.text+0x118): undefined reference to `XF86DGADirectVideo' /usr/lib/libSDL.a(SDL_x11dga.lo): In function `X11_CheckDGAMouse': SDL_x11dga.lo(.text+0x17e): undefined reference to `XF86DGAQueryDirectVideo' SDL_x11dga.lo(.text+0x1ab): undefined reference to `XF86DGADirectVideo' /usr/lib/libSDL.a(SDL_x11dga.lo): In function `X11_DisableDGAMouse': SDL_x11dga.lo(.text+0x1f9): undefined reference to `XF86DGADirectVideo' /usr/lib/libSDL.a(SDL_x11gamma.lo): In function `X11_SetGammaNoLock': SDL_x11gamma.lo(.text+0x13f): undefined reference to `XF40VidModeSetGamma' /usr/lib/libSDL.a(SDL_x11gamma.lo): In function `X11_GetGammaNoLock': SDL_x11gamma.lo(.text+0x250): undefined reference to `XF40VidModeGetGamma' /usr/lib/libSDL.a(SDL_x11modes.lo): In function `XF40VidModeGetModeInfo': SDL_x11modes.lo(.text+0x27): undefined reference to `XF40VidModeGetModeLine' /usr/lib/libSDL.a(SDL_x11modes.lo): In function `save_mode': SDL_x11modes.lo(.text+0xcb): undefined reference to `XF40VidModeGetViewPort' /usr/lib/libSDL.a(SDL_x11modes.lo): In function `restore_mode': SDL_x11modes.lo(.text+0x119): undefined reference to `XF40VidModeGetModeLine' SDL_x11modes.lo(.text+0x162): undefined reference to `XF40VidModeSwitchToMode' SDL_x11modes.lo(.text+0x1b4): undefined reference to `XF40VidModeSetViewPort' /usr/lib/libSDL.a(SDL_x11modes.lo): In function `set_best_resolution': SDL_x11modes.lo(.text+0x248): undefined reference to `XF40VidModeGetModeLine' SDL_x11modes.lo(.text+0x27a): undefined reference to `XF40VidModeGetAllModeLines' SDL_x11modes.lo(.text+0x32e): undefined reference to `XF40VidModeSwitchToMode' /usr/lib/libSDL.a(SDL_x11modes.lo): In function `get_real_resolution': SDL_x11modes.lo(.text+0x397): undefined reference to `XF40VidModeGetModeLine' /usr/lib/libSDL.a(SDL_x11modes.lo): In function `X11_GetVideoModes': SDL_x11modes.lo(.text+0x777): undefined reference to `XF40VidModeQueryExtension'SDL_x11modes.lo(.text+0x79b): undefined reference to `XF40VidModeQueryVersion' SDL_x11modes.lo(.text+0x7de): undefined reference to `XF40VidModeGetAllModeLines' /usr/lib/libSDL.a(SDL_x11modes.lo): In function `X11_EnterFullScreen': SDL_x11modes.lo(.text+0x10e1): undefined reference to `XF40VidModeLockModeSwitch' /usr/lib/libSDL.a(SDL_x11modes.lo): In function `X11_LeaveFullScreen': SDL_x11modes.lo(.text+0x1207): undefined reference to `XF40VidModeLockModeSwitch' make: *** [mplayer] Error 1 -- Keith Antoine (GANDALF) aka 'skippy' 18 Arkana St, The Gap, Queensland 4061 Australia PH:61733002161 Retired Geriatric, Sometime Electronics Engineer, Knowall, Brain in storage ___ Linux-users mailing list - http://linux-sxs.org/mailman/listinfo/linux-users Subscribe/Unsubscribe info, Archives,and Digests are located at the above URL.
login manager
I am using SUSE 7.1 . Before I was able to go to command prompt from login screen but after some change done in control panel (I do not know what) but now the login window is been changed only to one line and also it has only Reboot and halt options. How can I set it back to the previous one where I was getting the way to go to command prompt. ___ Linux-users mailing list - http://linux-sxs.org/mailman/listinfo/linux-users Subscribe/Unsubscribe info, Archives,and Digests are located at the above URL.
Re: trying to instll MPLayer in eServer 3.1.1
Keith, What version of binutils do you have? How did the ./configure go? Any errors? Where did you get the SDL and SDL-devel packages that you have installed? -L --- Keith Antoine [EMAIL PROTECTED] wrote: Yes I have read all the manual plus the faq and installed all that I could that is needed for MPlayer but I am getting the following during 'make'. I have no idea whats causing the error, someone else might, SDL is in /usr/local/lib:: lrwxrwxrwx1 root root 19 Mar 16 08:13 /usr/local/lib/libSDL-1.2.so.0 - libSDL-1.2.so.0.0.3 -rwxr-xr-x1 root root 1157876 Mar 16 08:13 /usr/local/lib/libSDL-1.2.so.0.0.3 -rw-r--r--1 root root 3997884 Mar 16 08:13 /usr/local/lib/libSDL.a -rwxr-xr-x1 root root 759 Mar 16 08:13 /usr/local/lib/libSDL.la-rw-r--r--1 root root 2518 Mar 16 08:13 /usr/local/lib/libSDLmain.a lrwxrwxrwx1 root root 19 Mar 16 08:13 /usr/local/lib/libSDL.so - libSDL-1.2.so.0.0.3 However it relates to esdaudio and I also have installed esound-0.2.8, however i have not been able to install mple-1.8.1, do not know if this is required though. I am dead brained when it comes to programming of any sort. help appreciated... ma -lmad -lnsl-L/usr/lib -Wl,-rpath,/usr/lib -lSDL -lpthread -laa -Lvidix -lvidix -LGui -lgui /usr/lib/libSDL.a(SDL_esdaudio.lo): In function `Audio_Available': SDL_esdaudio.lo(.text+0x1c): undefined reference to `esd_open_sound' SDL_esdaudio.lo(.text+0x31): undefined reference to `esd_close' /usr/lib/libSDL.a(SDL_esdaudio.lo): In function `ESD_OpenAudio': SDL_esdaudio.lo(.text+0x452): undefined reference to `esd_play_stream' /usr/lib/libSDL.a(SDL_x11dga.lo): In function `X11_EnableDGAMouse': SDL_x11dga.lo(.text+0xc6): undefined reference to `XF86DGAQueryExtension' SDL_x11dga.lo(.text+0xea): undefined reference to `XF86DGAQueryVersion' SDL_x11dga.lo(.text+0x118): undefined reference to `XF86DGADirectVideo' /usr/lib/libSDL.a(SDL_x11dga.lo): In function `X11_CheckDGAMouse': SDL_x11dga.lo(.text+0x17e): undefined reference to `XF86DGAQueryDirectVideo' SDL_x11dga.lo(.text+0x1ab): undefined reference to `XF86DGADirectVideo' /usr/lib/libSDL.a(SDL_x11dga.lo): In function `X11_DisableDGAMouse': SDL_x11dga.lo(.text+0x1f9): undefined reference to `XF86DGADirectVideo' /usr/lib/libSDL.a(SDL_x11gamma.lo): In function `X11_SetGammaNoLock': SDL_x11gamma.lo(.text+0x13f): undefined reference to `XF40VidModeSetGamma' /usr/lib/libSDL.a(SDL_x11gamma.lo): In function `X11_GetGammaNoLock': SDL_x11gamma.lo(.text+0x250): undefined reference to `XF40VidModeGetGamma' /usr/lib/libSDL.a(SDL_x11modes.lo): In function `XF40VidModeGetModeInfo': SDL_x11modes.lo(.text+0x27): undefined reference to `XF40VidModeGetModeLine' /usr/lib/libSDL.a(SDL_x11modes.lo): In function `save_mode': SDL_x11modes.lo(.text+0xcb): undefined reference to `XF40VidModeGetViewPort' /usr/lib/libSDL.a(SDL_x11modes.lo): In function `restore_mode': SDL_x11modes.lo(.text+0x119): undefined reference to `XF40VidModeGetModeLine' SDL_x11modes.lo(.text+0x162): undefined reference to `XF40VidModeSwitchToMode' SDL_x11modes.lo(.text+0x1b4): undefined reference to `XF40VidModeSetViewPort' /usr/lib/libSDL.a(SDL_x11modes.lo): In function `set_best_resolution': SDL_x11modes.lo(.text+0x248): undefined reference to `XF40VidModeGetModeLine' SDL_x11modes.lo(.text+0x27a): undefined reference to `XF40VidModeGetAllModeLines' SDL_x11modes.lo(.text+0x32e): undefined reference to `XF40VidModeSwitchToMode' /usr/lib/libSDL.a(SDL_x11modes.lo): In function `get_real_resolution': SDL_x11modes.lo(.text+0x397): undefined reference to `XF40VidModeGetModeLine' /usr/lib/libSDL.a(SDL_x11modes.lo): In function `X11_GetVideoModes': SDL_x11modes.lo(.text+0x777): undefined reference to `XF40VidModeQueryExtension'SDL_x11modes.lo(.text+0x79b): undefined reference to `XF40VidModeQueryVersion' SDL_x11modes.lo(.text+0x7de): undefined reference to `XF40VidModeGetAllModeLines' /usr/lib/libSDL.a(SDL_x11modes.lo): In function `X11_EnterFullScreen': SDL_x11modes.lo(.text+0x10e1): undefined reference to `XF40VidModeLockModeSwitch' /usr/lib/libSDL.a(SDL_x11modes.lo): In function `X11_LeaveFullScreen': SDL_x11modes.lo(.text+0x1207): undefined reference to `XF40VidModeLockModeSwitch' make: *** [mplayer] Error 1 = Lonni J. Friedman [EMAIL PROTECTED] Linux Step-by-step help: http://netllama.ipfox.com . __ Do You Yahoo!? Yahoo! Sports - live college hoops coverage http://sports.yahoo.com/ ___ Linux-users mailing list - http://linux-sxs.org/mailman/listinfo/linux-users
Re: login manager
--- zohar [EMAIL PROTECTED] wrote: I am using SUSE 7.1 . Before I was able to go to command prompt from login screen but after some change done in control panel (I do not know what) but now the login window is been changed only to one line and also it has only Reboot and halt options. How can I set it back to the previous one where I was getting the way to go to command prompt. Hitting Ctrl-Alt-F[1-6] doesn't work? = Lonni J. Friedman [EMAIL PROTECTED] Linux Step-by-step help: http://netllama.ipfox.com . __ Do You Yahoo!? Yahoo! Sports - live college hoops coverage http://sports.yahoo.com/ ___ Linux-users mailing list - http://linux-sxs.org/mailman/listinfo/linux-users Subscribe/Unsubscribe info, Archives,and Digests are located at the above URL.
Re: Good linux compatible sound card
On Sat, 16 Mar 2002 18:37:22 -0500, Joel Hammer wrote: Can someone recommend a really nice, high quality sound card for linux? Thanks, Joel Creatives Sound Blaster Live works quite well emu10k module ___ Linux-users mailing list - http://linux-sxs.org/mailman/listinfo/linux-users Subscribe/Unsubscribe info, Archives,and Digests are located at the above URL.
Re: trying to instll MPLayer in eServer 3.1.1
On Sunday 17 March 2002 04:42 pm, you wrote: Keith, What version of binutils do you have? How did the ./configure go? Any errors? Where did you get the SDL and SDL-devel packages that you have installed? Yeah! should have know you would ask difficult questions grin. Binutils 2.11.94, ./configure --enable-gui --enable-streaming, went through without a hitch, no errors. Cannot remember where I got the SDL packages, sorry but cannot remember about the devel either as I am unsure whether i installed that. Just checked. I have SDL-1.2.3 as a tarball and the DEVEL as an rpm. OK had acheck and think that i got them from libSDL.org and thats the way they come tarball and rpm. -- Keith Antoine (GANDALF) aka 'skippy' 18 Arkana St, The Gap, Queensland 4061 Australia PH:61733002161 Retired Geriatric, Sometime Electronics Engineer, Knowall, Brain in storage ___ Linux-users mailing list - http://linux-sxs.org/mailman/listinfo/linux-users Subscribe/Unsubscribe info, Archives,and Digests are located at the above URL.
New SxS steps for March 17
FTP-ProFTP (updated) Chang = Lonni J. Friedman [EMAIL PROTECTED] Linux Step-by-step help: http://netllama.ipfox.com . __ Do You Yahoo!? Yahoo! Sports - live college hoops coverage http://sports.yahoo.com/ ___ Linux-users mailing list - http://linux-sxs.org/mailman/listinfo/linux-users Subscribe/Unsubscribe info, Archives,and Digests are located at the above URL.
Re: trying to instll MPLayer in eServer 3.1.1
Its a bit strange that you'd get SDL as a tarball, and SDL-devel as an RPM. It should all be one or the other, not a mixture. Plus if you're building SDL from a tarball, then you should already have gotten the 'devel' stuff with the tarball. I'm wondering if you have ended up with a mixed version. Might be best to remove SDL completely as best as you can, and reinstall it again all from either RPM or tarball. ALso, which version of XFree86 are you using? I noticed some internal references to X11 stuff in those errors. If its the Caldera hack job of XFree86, you might want to consider grabbing XFree86-4.2.0 and using that instead. I've built MPlayer on 3 different boxes, and never ran into any problems, but i tend to use alot of pure sources rather than distro RPMs. --- Keith Antoine [EMAIL PROTECTED] wrote: On Sunday 17 March 2002 04:42 pm, you wrote: Keith, What version of binutils do you have? How did the ./configure go? Any errors? Where did you get the SDL and SDL-devel packages that you have installed? Yeah! should have know you would ask difficult questions grin. Binutils 2.11.94, ./configure --enable-gui --enable-streaming, went through without a hitch, no errors. Cannot remember where I got the SDL packages, sorry but cannot remember about the devel either as I am unsure whether i installed that. Just checked. I have SDL-1.2.3 as a tarball and the DEVEL as an rpm. OK had acheck and think that i got them from libSDL.org and thats the way they come tarball and rpm. = Lonni J. Friedman [EMAIL PROTECTED] Linux Step-by-step help: http://netllama.ipfox.com . __ Do You Yahoo!? Yahoo! Sports - live college hoops coverage http://sports.yahoo.com/ ___ Linux-users mailing list - http://linux-sxs.org/mailman/listinfo/linux-users Subscribe/Unsubscribe info, Archives,and Digests are located at the above URL.
