[linux-yocto] [PATCH 00/29] Create new feature branch for Valley Island BSP
From: Chang Rebecca Swee Fun Hi all, Here is a request to create feature branch to host Valley Island PCI enumerated LPSS I/O device drivers. We expect the patch series to be removed over time. This will give us time to stage a working code while we are working on up-stream commits to mainline and eventually back-port them into LTS/LTSI. As per previous internal discussion, we think that feature branch is a right approach for ISG. This new branch is named: isg-1.0 with -1.0 suffix as the initial version of this feature branch. This feature branch was branched out from linux-yocto-3.10 standard/base at the commit: 3e0a296fae952d8d93eb0f96566bf6d4a978c8ee minnowboard-keys: Bind MinnowBoard buttons to arrow keys This branch was built tested to ensure no merge issues during build time. The PCI enumerated I/O drivers are sanity tested by checking "dmesg", "lspci -k" and "lsmod". Please help to create a new branch named isg-1.0 in linux-yocto-3.10 and pull the entire patch series into the feature branch. Thanks. Rebecca The following changes since commit 3e0a296fae952d8d93eb0f96566bf6d4a978c8ee: minnowboard-keys: Bind MinnowBoard buttons to arrow keys (2014-02-12 00:08:25 -0500) are available in the git repository at: git://git.yoctoproject.org/linux-yocto-contrib rebeccas/isg-1.0 http://git.yoctoproject.org/cgit.cgi/linux-yocto-contrib/log/?h=rebeccas/isg-1.0 Alan Stern (1): usb: gadget: don't fail when DMA isn't present Chang, Rebecca Swee Fun (1): i2c: i801: Enable BYT SMBUS support Chew, Chiau Ee (14): x86/Kconfig: add PCI dependency for CONFIG_X86_INTEL_LPSS x86/byt: enable board file for BYT LPSS PCI mode dma: dw: Fix Intel MID DMA driver and Designware DMA driver loading sequence dma: dw: Implement suspend/resume callbacks serial: 8250_dw: Added support for 1M, 2M, 3M and 4M exat baud rate i2c: designware-pci: Add support for Intel BayTrail LPSS I2C i2c: designware-pcidrv: Add 10-bit addressing mode functionality i2c: designware-pcidrv: Option to set custom HCNT, LCNT and SDA value spi/pxa2xx-pci: Add support for Intel BYT SPI spi/pxa2xx: Fix BYT ACPI mode SPI DMA transfer failure at low speeds sdhc: acpi: Fix SDCARD card detection failure pwm: lpss: Enable BYT PCI mode PWM pwm: lpss: Fix base_unit calculation ACPI / LPSS: Add BYT ACPI mode PWM Chew, Kean Ho (5): mmc: sdhci: Force BYT SDCARD host to run with SDR25 mode pinctrl-baytrail: add function mux checking in gpio pin request pinctrl-baytrail: unmap interrupt when free the gpio pin pinctrl-baytrail: enable platform device in the absent of ACPI enumeration pinctrl-baytrail: setup IOAPIC interrupt for GPIO clusters on non-ACPI system Felipe Balbi (1): usb: gadget: udc-core: move sysfs_notify() to a workqueue H Hartley Sweeten (1): pwm: Add sysfs interface Heikki Krogerus (2): serial: 8250: don't change the fifo trigger level when using dma serial: 8250_pci: add support for Intel BayTrail Maurice Petallo (3): usb: dwc3: pci: Enable/disable ulpi phy refclk x86/byt: Fix device name string for clkdev registration mmc: sdhci: Fix continuous warning prints in ISR if shared interrupt Mika Westerberg (1): pwm: add support for Intel Low Power Subsystem PWM Documentation/ABI/testing/sysfs-class-pwm | 79 +++ Documentation/pwm.txt | 37 +++ arch/x86/Kconfig | 11 +- arch/x86/platform/Makefile |3 + arch/x86/platform/byt/Makefile |1 + arch/x86/platform/byt/byt-board.c | 84 +++ drivers/acpi/acpi_lpss.c | 11 + drivers/dma/Makefile |2 +- drivers/dma/dw/pci.c | 36 +++ drivers/i2c/busses/Makefile|2 +- drivers/i2c/busses/i2c-designware-pcidrv.c | 126 +- drivers/i2c/busses/i2c-i801.c |2 + drivers/mmc/host/sdhci-acpi.c |7 +- drivers/mmc/host/sdhci-pci.c |3 +- drivers/mmc/host/sdhci.c | 17 +- drivers/pinctrl/Kconfig| 19 +- drivers/pinctrl/Makefile |1 + drivers/pinctrl/pinctrl-baytrail-dev.c | 159 + drivers/pinctrl/pinctrl-baytrail.c | 76 +- drivers/pwm/Kconfig| 21 ++ drivers/pwm/Makefile |3 + drivers/pwm/core.c | 25 +- drivers/pwm/pwm-lpss-pci.c | 118 ++ drivers/pwm/pwm-lpss.c | 186 +++ drivers/pwm/pwm-lpss.h | 19 ++ drivers/pwm/sysfs.c| 352 drivers/spi/Kconfig|5 +- drivers/spi/spi-pxa2xx-dma.c |2 +- drivers/spi/spi-pxa2xx-pci.c | 85 +-- drivers/tty/serial/8250/8250_core.c|2 +- drivers/tty/serial/8250/8250_dw.c
Re: [linux-yocto] [PATCH 00/29] Create new feature branch for Valley Island BSP
On 14-04-07 11:17 AM, rebecca.swee.fun.ch...@intel.com wrote: From: Chang Rebecca Swee Fun Hi all, Adding Darren (just in case he missed this). Here is a request to create feature branch to host Valley Island PCI enumerated LPSS I/O device drivers. We expect the patch series to be removed over time. This will give us time to stage a working code while we are working on up-stream commits to mainline and eventually back-port them into LTS/LTSI. As per previous internal discussion, we think that feature branch is a right approach for ISG. The content looks reasonable to me, there's a mix of mainline backports and new patches, but nothing jumps out as "not belonging" on the feature branch. Some of the mainline backports would probably be better merged to standard/base, and made available to all boards, but I won't insist (unless Darren wants to insist instead). This new branch is named: isg-1.0 with -1.0 suffix as the initial version of this feature branch. This feature branch was branched out from linux-yocto-3.10 standard/base at the commit: Did we want to give it at least part of a name that indicates the purpose as well ? i.e. isg-io-1.0. Cheers, Bruce 3e0a296fae952d8d93eb0f96566bf6d4a978c8ee minnowboard-keys: Bind MinnowBoard buttons to arrow keys This branch was built tested to ensure no merge issues during build time. The PCI enumerated I/O drivers are sanity tested by checking "dmesg", "lspci -k" and "lsmod". Please help to create a new branch named isg-1.0 in linux-yocto-3.10 and pull the entire patch series into the feature branch. Thanks. Rebecca The following changes since commit 3e0a296fae952d8d93eb0f96566bf6d4a978c8ee: minnowboard-keys: Bind MinnowBoard buttons to arrow keys (2014-02-12 00:08:25 -0500) are available in the git repository at: git://git.yoctoproject.org/linux-yocto-contrib rebeccas/isg-1.0 http://git.yoctoproject.org/cgit.cgi/linux-yocto-contrib/log/?h=rebeccas/isg-1.0 Alan Stern (1): usb: gadget: don't fail when DMA isn't present Chang, Rebecca Swee Fun (1): i2c: i801: Enable BYT SMBUS support Chew, Chiau Ee (14): x86/Kconfig: add PCI dependency for CONFIG_X86_INTEL_LPSS x86/byt: enable board file for BYT LPSS PCI mode dma: dw: Fix Intel MID DMA driver and Designware DMA driver loading sequence dma: dw: Implement suspend/resume callbacks serial: 8250_dw: Added support for 1M, 2M, 3M and 4M exat baud rate i2c: designware-pci: Add support for Intel BayTrail LPSS I2C i2c: designware-pcidrv: Add 10-bit addressing mode functionality i2c: designware-pcidrv: Option to set custom HCNT, LCNT and SDA value spi/pxa2xx-pci: Add support for Intel BYT SPI spi/pxa2xx: Fix BYT ACPI mode SPI DMA transfer failure at low speeds sdhc: acpi: Fix SDCARD card detection failure pwm: lpss: Enable BYT PCI mode PWM pwm: lpss: Fix base_unit calculation ACPI / LPSS: Add BYT ACPI mode PWM Chew, Kean Ho (5): mmc: sdhci: Force BYT SDCARD host to run with SDR25 mode pinctrl-baytrail: add function mux checking in gpio pin request pinctrl-baytrail: unmap interrupt when free the gpio pin pinctrl-baytrail: enable platform device in the absent of ACPI enumeration pinctrl-baytrail: setup IOAPIC interrupt for GPIO clusters on non-ACPI system Felipe Balbi (1): usb: gadget: udc-core: move sysfs_notify() to a workqueue H Hartley Sweeten (1): pwm: Add sysfs interface Heikki Krogerus (2): serial: 8250: don't change the fifo trigger level when using dma serial: 8250_pci: add support for Intel BayTrail Maurice Petallo (3): usb: dwc3: pci: Enable/disable ulpi phy refclk x86/byt: Fix device name string for clkdev registration mmc: sdhci: Fix continuous warning prints in ISR if shared interrupt Mika Westerberg (1): pwm: add support for Intel Low Power Subsystem PWM Documentation/ABI/testing/sysfs-class-pwm | 79 +++ Documentation/pwm.txt | 37 +++ arch/x86/Kconfig | 11 +- arch/x86/platform/Makefile |3 + arch/x86/platform/byt/Makefile |1 + arch/x86/platform/byt/byt-board.c | 84 +++ drivers/acpi/acpi_lpss.c | 11 + drivers/dma/Makefile |2 +- drivers/dma/dw/pci.c | 36 +++ drivers/i2c/busses/Makefile|2 +- drivers/i2c/busses/i2c-designware-pcidrv.c | 126 +- drivers/i2c/busses/i2c-i801.c |2 + drivers/mmc/host/sdhci-acpi.c |7 +- drivers/mmc/host/sdhci-pci.c |3 +- drivers/mmc/host/sdhci.c | 17 +- drivers/pinctrl/Kconfig| 19 +- drivers/pinctrl/Makefile |1 + drivers/pinctrl/pinctrl-baytrail-dev.c | 159 + drivers/pinctrl/pinctrl-baytrail.c | 76 +- drivers/pwm/Kconfig| 21 ++ driv
Re: [linux-yocto] [PATCH 00/29] Create new feature branch for Valley Island BSP
> -Original Message- > From: Bruce Ashfield [mailto:bruce.ashfi...@windriver.com] > Sent: 08 April, 2014 3:04 AM > To: Chang, Rebecca Swee Fun; linux-yocto@yoctoproject.org; Darren Hart > Subject: Re: [linux-yocto] [PATCH 00/29] Create new feature branch for > Valley Island BSP > > On 14-04-07 11:17 AM, rebecca.swee.fun.ch...@intel.com wrote: > > From: Chang Rebecca Swee Fun > > > > Hi all, > > Adding Darren (just in case he missed this). > > > > > Here is a request to create feature branch to host Valley Island PCI > > enumerated LPSS I/O device drivers. We expect the patch series to be > > removed over time. This will give us time to stage a working code > > while we are working on up-stream commits to mainline and eventually > > back-port them into LTS/LTSI. As per previous internal discussion, we > > think that feature branch is a right approach for ISG. > > The content looks reasonable to me, there's a mix of mainline backports and > new patches, but nothing jumps out as "not belonging" on the feature > branch. > > Some of the mainline backports would probably be better merged to > standard/base, and made available to all boards, but I won't insist (unless > Darren wants to insist instead). I agree on that. When the patches are up in mainline, we will do the mainline backports into standard/base. > > > > > This new branch is named: isg-1.0 with -1.0 suffix as the initial > > version of this feature branch. This feature branch was branched out > > from linux-yocto-3.10 standard/base at the commit: > > Did we want to give it at least part of a name that indicates the purpose as > well ? i.e. isg-io-1.0. After some brief discussion, we decided to use the name: valleyisland-io-1.0. Thanks. Rebecca > > Cheers, > > Bruce > > > > > 3e0a296fae952d8d93eb0f96566bf6d4a978c8ee > > minnowboard-keys: Bind MinnowBoard buttons to arrow keys > > > > This branch was built tested to ensure no merge issues during build time. > > The PCI enumerated I/O drivers are sanity tested by checking "dmesg", > > "lspci -k" and "lsmod". > > > > Please help to create a new branch named isg-1.0 in linux-yocto-3.10 > > and pull the entire patch series into the feature branch. > > > > Thanks. > > > > Rebecca > > > > The following changes since commit > 3e0a296fae952d8d93eb0f96566bf6d4a978c8ee: > > > >minnowboard-keys: Bind MinnowBoard buttons to arrow keys > > (2014-02-12 00:08:25 -0500) > > > > are available in the git repository at: > > > >git://git.yoctoproject.org/linux-yocto-contrib rebeccas/isg-1.0 > > > > http://git.yoctoproject.org/cgit.cgi/linux-yocto-contrib/log/?h=rebecc > > as/isg-1.0 > > > > Alan Stern (1): > >usb: gadget: don't fail when DMA isn't present > > > > Chang, Rebecca Swee Fun (1): > >i2c: i801: Enable BYT SMBUS support > > > > Chew, Chiau Ee (14): > >x86/Kconfig: add PCI dependency for CONFIG_X86_INTEL_LPSS > >x86/byt: enable board file for BYT LPSS PCI mode > >dma: dw: Fix Intel MID DMA driver and Designware DMA driver loading > > sequence > >dma: dw: Implement suspend/resume callbacks > >serial: 8250_dw: Added support for 1M, 2M, 3M and 4M exat baud rate > >i2c: designware-pci: Add support for Intel BayTrail LPSS I2C > >i2c: designware-pcidrv: Add 10-bit addressing mode functionality > >i2c: designware-pcidrv: Option to set custom HCNT, LCNT and SDA value > >spi/pxa2xx-pci: Add support for Intel BYT SPI > >spi/pxa2xx: Fix BYT ACPI mode SPI DMA transfer failure at low speeds > >sdhc: acpi: Fix SDCARD card detection failure > >pwm: lpss: Enable BYT PCI mode PWM > >pwm: lpss: Fix base_unit calculation > >ACPI / LPSS: Add BYT ACPI mode PWM > > > > Chew, Kean Ho (5): > >mmc: sdhci: Force BYT SDCARD host to run with SDR25 mode > >pinctrl-baytrail: add function mux checking in gpio pin request > >pinctrl-baytrail: unmap interrupt when free the gpio pin > >pinctrl-baytrail: enable platform device in the absent of ACPI > > enumeration > >pinctrl-baytrail: setup IOAPIC interrupt for GPIO clusters on > > non-ACPI system > > > > Felipe Balbi (1): > >usb: gadget: udc-core: move sysfs_notify() to a workqueue > > > > H Hartley Sweeten (1): > >pwm: Add sysfs interface > > > > Heikki Krogerus (2): > >serial: 8250: don't change the fifo trigger level when
Re: [linux-yocto] [PATCH 00/29] Create new feature branch for Valley Island BSP
On 2014-04-07, 8:28 PM, Chang, Rebecca Swee Fun wrote: -Original Message- From: Bruce Ashfield [mailto:bruce.ashfi...@windriver.com] Sent: 08 April, 2014 3:04 AM To: Chang, Rebecca Swee Fun; linux-yocto@yoctoproject.org; Darren Hart Subject: Re: [linux-yocto] [PATCH 00/29] Create new feature branch for Valley Island BSP On 14-04-07 11:17 AM, rebecca.swee.fun.ch...@intel.com wrote: From: Chang Rebecca Swee Fun Hi all, Adding Darren (just in case he missed this). Here is a request to create feature branch to host Valley Island PCI enumerated LPSS I/O device drivers. We expect the patch series to be removed over time. This will give us time to stage a working code while we are working on up-stream commits to mainline and eventually back-port them into LTS/LTSI. As per previous internal discussion, we think that feature branch is a right approach for ISG. The content looks reasonable to me, there's a mix of mainline backports and new patches, but nothing jumps out as "not belonging" on the feature branch. Some of the mainline backports would probably be better merged to standard/base, and made available to all boards, but I won't insist (unless Darren wants to insist instead). I agree on that. When the patches are up in mainline, we will do the mainline backports into standard/base. Some of the patches are already referencing mainline commits. Is there any strong reason to delay on them ? This new branch is named: isg-1.0 with -1.0 suffix as the initial version of this feature branch. This feature branch was branched out from linux-yocto-3.10 standard/base at the commit: Did we want to give it at least part of a name that indicates the purpose as well ? i.e. isg-io-1.0. After some brief discussion, we decided to use the name: valleyisland-io-1.0. That works for me. Bruce Thanks. Rebecca Cheers, Bruce 3e0a296fae952d8d93eb0f96566bf6d4a978c8ee minnowboard-keys: Bind MinnowBoard buttons to arrow keys This branch was built tested to ensure no merge issues during build time. The PCI enumerated I/O drivers are sanity tested by checking "dmesg", "lspci -k" and "lsmod". Please help to create a new branch named isg-1.0 in linux-yocto-3.10 and pull the entire patch series into the feature branch. Thanks. Rebecca The following changes since commit 3e0a296fae952d8d93eb0f96566bf6d4a978c8ee: minnowboard-keys: Bind MinnowBoard buttons to arrow keys (2014-02-12 00:08:25 -0500) are available in the git repository at: git://git.yoctoproject.org/linux-yocto-contrib rebeccas/isg-1.0 http://git.yoctoproject.org/cgit.cgi/linux-yocto-contrib/log/?h=rebecc as/isg-1.0 Alan Stern (1): usb: gadget: don't fail when DMA isn't present Chang, Rebecca Swee Fun (1): i2c: i801: Enable BYT SMBUS support Chew, Chiau Ee (14): x86/Kconfig: add PCI dependency for CONFIG_X86_INTEL_LPSS x86/byt: enable board file for BYT LPSS PCI mode dma: dw: Fix Intel MID DMA driver and Designware DMA driver loading sequence dma: dw: Implement suspend/resume callbacks serial: 8250_dw: Added support for 1M, 2M, 3M and 4M exat baud rate i2c: designware-pci: Add support for Intel BayTrail LPSS I2C i2c: designware-pcidrv: Add 10-bit addressing mode functionality i2c: designware-pcidrv: Option to set custom HCNT, LCNT and SDA value spi/pxa2xx-pci: Add support for Intel BYT SPI spi/pxa2xx: Fix BYT ACPI mode SPI DMA transfer failure at low speeds sdhc: acpi: Fix SDCARD card detection failure pwm: lpss: Enable BYT PCI mode PWM pwm: lpss: Fix base_unit calculation ACPI / LPSS: Add BYT ACPI mode PWM Chew, Kean Ho (5): mmc: sdhci: Force BYT SDCARD host to run with SDR25 mode pinctrl-baytrail: add function mux checking in gpio pin request pinctrl-baytrail: unmap interrupt when free the gpio pin pinctrl-baytrail: enable platform device in the absent of ACPI enumeration pinctrl-baytrail: setup IOAPIC interrupt for GPIO clusters on non-ACPI system Felipe Balbi (1): usb: gadget: udc-core: move sysfs_notify() to a workqueue H Hartley Sweeten (1): pwm: Add sysfs interface Heikki Krogerus (2): serial: 8250: don't change the fifo trigger level when using dma serial: 8250_pci: add support for Intel BayTrail Maurice Petallo (3): usb: dwc3: pci: Enable/disable ulpi phy refclk x86/byt: Fix device name string for clkdev registration mmc: sdhci: Fix continuous warning prints in ISR if shared interrupt Mika Westerberg (1): pwm: add support for Intel Low Power Subsystem PWM Documentation/ABI/testing/sysfs-class-pwm | 79 +++ Documentation/pwm.txt | 37 +++ arch/x86/Kconfig | 11 +- arch/x86/platform/Makefile |3 + arch/x86/platform/byt/Makefile |1 + arch/x86/platform/byt/byt-board.c | 84 +++ d
Re: [linux-yocto] [PATCH 00/29] Create new feature branch for Valley Island BSP
> -Original Message- > From: Bruce Ashfield [mailto:bruce.ashfi...@windriver.com] > Sent: 08 April, 2014 12:40 PM > To: Chang, Rebecca Swee Fun; linux-yocto@yoctoproject.org; Darren Hart > Subject: Re: [linux-yocto] [PATCH 00/29] Create new feature branch for > Valley Island BSP > > On 2014-04-07, 8:28 PM, Chang, Rebecca Swee Fun wrote: > > > > > >> -Original Message- > >> From: Bruce Ashfield [mailto:bruce.ashfi...@windriver.com] > >> Sent: 08 April, 2014 3:04 AM > >> To: Chang, Rebecca Swee Fun; linux-yocto@yoctoproject.org; Darren > >> Hart > >> Subject: Re: [linux-yocto] [PATCH 00/29] Create new feature branch > >> for Valley Island BSP > >> > >> On 14-04-07 11:17 AM, rebecca.swee.fun.ch...@intel.com wrote: > >>> From: Chang Rebecca Swee Fun > >>> > >>> Hi all, > >> > >> Adding Darren (just in case he missed this). > >> > >>> > >>> Here is a request to create feature branch to host Valley Island PCI > >>> enumerated LPSS I/O device drivers. We expect the patch series to be > >>> removed over time. This will give us time to stage a working code > >>> while we are working on up-stream commits to mainline and eventually > >>> back-port them into LTS/LTSI. As per previous internal discussion, > >>> we think that feature branch is a right approach for ISG. > >> > >> The content looks reasonable to me, there's a mix of mainline > >> backports and new patches, but nothing jumps out as "not belonging" > >> on the feature branch. > >> > >> Some of the mainline backports would probably be better merged to > >> standard/base, and made available to all boards, but I won't insist > >> (unless Darren wants to insist instead). > > > > I agree on that. When the patches are up in mainline, we will do the > mainline backports into standard/base. > > Some of the patches are already referencing mainline commits. Is there any > strong reason to delay on them ? Thanks for the reminder. Since we have patches available in mainline, I will do the rebase and have the feature branch updated. > > >> > >>> > >>> This new branch is named: isg-1.0 with -1.0 suffix as the initial > >>> version of this feature branch. This feature branch was branched out > >>> from linux-yocto-3.10 standard/base at the commit: > >> > >> Did we want to give it at least part of a name that indicates the > >> purpose as well ? i.e. isg-io-1.0. > > > > After some brief discussion, we decided to use the name: valleyisland-io- > 1.0. > > That works for me. > > Bruce > > > > > Thanks. > > > > Rebecca > > > >> > >> Cheers, > >> > >> Bruce > >> > >>> > >>> 3e0a296fae952d8d93eb0f96566bf6d4a978c8ee > >>> minnowboard-keys: Bind MinnowBoard buttons to arrow keys > >>> > >>> This branch was built tested to ensure no merge issues during build time. > >>> The PCI enumerated I/O drivers are sanity tested by checking > >>> "dmesg", "lspci -k" and "lsmod". > >>> > >>> Please help to create a new branch named isg-1.0 in linux-yocto-3.10 > >>> and pull the entire patch series into the feature branch. > >>> > >>> Thanks. > >>> > >>> Rebecca > >>> > >>> The following changes since commit > >> 3e0a296fae952d8d93eb0f96566bf6d4a978c8ee: > >>> > >>> minnowboard-keys: Bind MinnowBoard buttons to arrow keys > >>> (2014-02-12 00:08:25 -0500) > >>> > >>> are available in the git repository at: > >>> > >>> git://git.yoctoproject.org/linux-yocto-contrib rebeccas/isg-1.0 > >>> > >>> http://git.yoctoproject.org/cgit.cgi/linux-yocto-contrib/log/?h=rebe > >>> cc > >>> as/isg-1.0 > >>> > >>> Alan Stern (1): > >>> usb: gadget: don't fail when DMA isn't present > >>> > >>> Chang, Rebecca Swee Fun (1): > >>> i2c: i801: Enable BYT SMBUS support > >>> > >>> Chew, Chiau Ee (14): > >>> x86/Kconfig: add PCI dependency for CONFIG_X86_INTEL_LPSS > >>> x86/byt: enable board file for BYT LPSS PCI mode > >>> dma: dw: Fix Intel MID DMA driver and Designware DMA driver loading > >&
Re: [linux-yocto] [PATCH 00/29] Create new feature branch for Valley Island BSP
On 4/7/2014 8:17 AM, rebecca.swee.fun.ch...@intel.com wrote: From: Chang Rebecca Swee Fun Hi all, Here is a request to create feature branch to host Valley Island PCI enumerated LPSS I/O device drivers. We expect the patch series to be removed over time. This will give us time to stage a working code while we are working on up-stream commits to mainline and eventually back-port them into LTS/LTSI. As per previous internal discussion, we think that feature branch is a right approach for ISG. This new branch is named: isg-1.0 with -1.0 suffix as the initial version of this feature branch. This feature branch was branched out from linux-yocto-3.10 standard/base at the commit: 3e0a296fae952d8d93eb0f96566bf6d4a978c8ee minnowboard-keys: Bind MinnowBoard buttons to arrow keys This branch was built tested to ensure no merge issues during build time. The PCI enumerated I/O drivers are sanity tested by checking "dmesg", "lspci -k" and "lsmod". Please help to create a new branch named isg-1.0 in linux-yocto-3.10 and pull the entire patch series into the feature branch. Thanks. Rebecca Hi Rebecca, I have sent my review feedback by email to many of the commits. The commits which did not get feedback from me, are already in good shape. Thanks, Nitin The following changes since commit 3e0a296fae952d8d93eb0f96566bf6d4a978c8ee: minnowboard-keys: Bind MinnowBoard buttons to arrow keys (2014-02-12 00:08:25 -0500) are available in the git repository at: git://git.yoctoproject.org/linux-yocto-contrib rebeccas/isg-1.0 http://git.yoctoproject.org/cgit.cgi/linux-yocto-contrib/log/?h=rebeccas/isg-1.0 Alan Stern (1): usb: gadget: don't fail when DMA isn't present Chang, Rebecca Swee Fun (1): i2c: i801: Enable BYT SMBUS support Chew, Chiau Ee (14): x86/Kconfig: add PCI dependency for CONFIG_X86_INTEL_LPSS x86/byt: enable board file for BYT LPSS PCI mode dma: dw: Fix Intel MID DMA driver and Designware DMA driver loading sequence dma: dw: Implement suspend/resume callbacks serial: 8250_dw: Added support for 1M, 2M, 3M and 4M exat baud rate i2c: designware-pci: Add support for Intel BayTrail LPSS I2C i2c: designware-pcidrv: Add 10-bit addressing mode functionality i2c: designware-pcidrv: Option to set custom HCNT, LCNT and SDA value spi/pxa2xx-pci: Add support for Intel BYT SPI spi/pxa2xx: Fix BYT ACPI mode SPI DMA transfer failure at low speeds sdhc: acpi: Fix SDCARD card detection failure pwm: lpss: Enable BYT PCI mode PWM pwm: lpss: Fix base_unit calculation ACPI / LPSS: Add BYT ACPI mode PWM Chew, Kean Ho (5): mmc: sdhci: Force BYT SDCARD host to run with SDR25 mode pinctrl-baytrail: add function mux checking in gpio pin request pinctrl-baytrail: unmap interrupt when free the gpio pin pinctrl-baytrail: enable platform device in the absent of ACPI enumeration pinctrl-baytrail: setup IOAPIC interrupt for GPIO clusters on non-ACPI system Felipe Balbi (1): usb: gadget: udc-core: move sysfs_notify() to a workqueue H Hartley Sweeten (1): pwm: Add sysfs interface Heikki Krogerus (2): serial: 8250: don't change the fifo trigger level when using dma serial: 8250_pci: add support for Intel BayTrail Maurice Petallo (3): usb: dwc3: pci: Enable/disable ulpi phy refclk x86/byt: Fix device name string for clkdev registration mmc: sdhci: Fix continuous warning prints in ISR if shared interrupt Mika Westerberg (1): pwm: add support for Intel Low Power Subsystem PWM Documentation/ABI/testing/sysfs-class-pwm | 79 +++ Documentation/pwm.txt | 37 +++ arch/x86/Kconfig | 11 +- arch/x86/platform/Makefile |3 + arch/x86/platform/byt/Makefile |1 + arch/x86/platform/byt/byt-board.c | 84 +++ drivers/acpi/acpi_lpss.c | 11 + drivers/dma/Makefile |2 +- drivers/dma/dw/pci.c | 36 +++ drivers/i2c/busses/Makefile|2 +- drivers/i2c/busses/i2c-designware-pcidrv.c | 126 +- drivers/i2c/busses/i2c-i801.c |2 + drivers/mmc/host/sdhci-acpi.c |7 +- drivers/mmc/host/sdhci-pci.c |3 +- drivers/mmc/host/sdhci.c | 17 +- drivers/pinctrl/Kconfig| 19 +- drivers/pinctrl/Makefile |1 + drivers/pinctrl/pinctrl-baytrail-dev.c | 159 + drivers/pinctrl/pinctrl-baytrail.c | 76 +- drivers/pwm/Kconfig| 21 ++ drivers/pwm/Makefile |3 + drivers/pwm/core.c | 25 +- drivers/pwm/pwm-lpss-pci.c | 118 ++ drivers/pwm/pwm-lpss.c | 186 +++ drivers/pwm/pwm-lpss.h | 19 ++ drivers/pwm/sysfs.c
Re: [linux-yocto] [PATCH 00/29] Create new feature branch for Valley Island BSP
Thanks Nitin. I will work with the dev team to make our feature branch in better shape. Rebecca > -Original Message- > From: Kamble, Nitin A > Sent: 10 April, 2014 8:41 AM > To: Chang, Rebecca Swee Fun; linux-yocto@yoctoproject.org > Subject: Re: [linux-yocto] [PATCH 00/29] Create new feature branch for > Valley Island BSP > > > On 4/7/2014 8:17 AM, rebecca.swee.fun.ch...@intel.com wrote: > > From: Chang Rebecca Swee Fun > > > > Hi all, > > > > Here is a request to create feature branch to host Valley Island PCI > > enumerated LPSS I/O device drivers. We expect the patch series to be > > removed over time. This will give us time to stage a working code > > while we are working on up-stream commits to mainline and eventually > > back-port them into LTS/LTSI. As per previous internal discussion, we > > think that feature branch is a right approach for ISG. > > > > This new branch is named: isg-1.0 with -1.0 suffix as the initial > > version of this feature branch. This feature branch was branched out > > from linux-yocto-3.10 standard/base at the commit: > > > > 3e0a296fae952d8d93eb0f96566bf6d4a978c8ee > > minnowboard-keys: Bind MinnowBoard buttons to arrow keys > > > > This branch was built tested to ensure no merge issues during build time. > > The PCI enumerated I/O drivers are sanity tested by checking "dmesg", > > "lspci -k" and "lsmod". > > > > Please help to create a new branch named isg-1.0 in linux-yocto-3.10 > > and pull the entire patch series into the feature branch. > > > > Thanks. > > > > Rebecca > Hi Rebecca, >I have sent my review feedback by email to many of the commits. The > commits which did not get feedback from me, are already in good shape. > > Thanks, > Nitin > > > The following changes since commit > 3e0a296fae952d8d93eb0f96566bf6d4a978c8ee: > > > >minnowboard-keys: Bind MinnowBoard buttons to arrow keys > > (2014-02-12 00:08:25 -0500) > > > > are available in the git repository at: > > > >git://git.yoctoproject.org/linux-yocto-contrib rebeccas/isg-1.0 > > > > http://git.yoctoproject.org/cgit.cgi/linux-yocto-contrib/log/?h=rebecc > > as/isg-1.0 > > > > Alan Stern (1): > >usb: gadget: don't fail when DMA isn't present > > > > Chang, Rebecca Swee Fun (1): > >i2c: i801: Enable BYT SMBUS support > > > > Chew, Chiau Ee (14): > >x86/Kconfig: add PCI dependency for CONFIG_X86_INTEL_LPSS > >x86/byt: enable board file for BYT LPSS PCI mode > >dma: dw: Fix Intel MID DMA driver and Designware DMA driver loading > > sequence > >dma: dw: Implement suspend/resume callbacks > >serial: 8250_dw: Added support for 1M, 2M, 3M and 4M exat baud rate > >i2c: designware-pci: Add support for Intel BayTrail LPSS I2C > >i2c: designware-pcidrv: Add 10-bit addressing mode functionality > >i2c: designware-pcidrv: Option to set custom HCNT, LCNT and SDA value > >spi/pxa2xx-pci: Add support for Intel BYT SPI > >spi/pxa2xx: Fix BYT ACPI mode SPI DMA transfer failure at low speeds > >sdhc: acpi: Fix SDCARD card detection failure > >pwm: lpss: Enable BYT PCI mode PWM > >pwm: lpss: Fix base_unit calculation > >ACPI / LPSS: Add BYT ACPI mode PWM > > > > Chew, Kean Ho (5): > >mmc: sdhci: Force BYT SDCARD host to run with SDR25 mode > >pinctrl-baytrail: add function mux checking in gpio pin request > >pinctrl-baytrail: unmap interrupt when free the gpio pin > >pinctrl-baytrail: enable platform device in the absent of ACPI > > enumeration > >pinctrl-baytrail: setup IOAPIC interrupt for GPIO clusters on > > non-ACPI system > > > > Felipe Balbi (1): > >usb: gadget: udc-core: move sysfs_notify() to a workqueue > > > > H Hartley Sweeten (1): > >pwm: Add sysfs interface > > > > Heikki Krogerus (2): > >serial: 8250: don't change the fifo trigger level when using dma > >serial: 8250_pci: add support for Intel BayTrail > > > > Maurice Petallo (3): > >usb: dwc3: pci: Enable/disable ulpi phy refclk > >x86/byt: Fix device name string for clkdev registration > >mmc: sdhci: Fix continuous warning prints in ISR if shared > > interrupt > > > > Mika Westerberg (1): > >pwm: add support for Intel Low Power Subsystem PWM > > > > Documentation/ABI/testing/sysfs-class-pwm | 79 +++ > > Documentation/pwm.txt
