Re: [MBZ] Help with Shop Manual CD
Where can Steve Nervig's index be found?? -- Luther KB5QHUAlma, Ark '87 300SDL (272,xxx mi) head case '85 Ford F250 6.9 diesel (x58,xxx mi) BioBeast '82 300CD (166 kmi) '82 300D (74 kmi) getting donor engine-sold '85 300D (280,176) parts car sans engine Quoting ned kleinhenz [EMAIL PROTECTED]: Thanks guys. Steve Nervig's index seems to do the trick. Ned Kleinhenz '95 E300D x2 ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
[MBZ] TEST
Did I pass? I sent a message earlier that didn't come through. Kevin in Hillsboro, OR 1983 300SD 267Kmi, Ursula ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] TEST
I guess I'm up and runnin' now since it just came through. Kevin in Hillsboro, OR 1983 300SD 267Kmi, Ursula ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] Brake disks
You wrote:spec in the shop manual: 10.6 mm = 0.417. Mine measures 0.385. I presume this means I should change the disk before I put it back together and drive it 2500 miles. In a word, Yes. I suspect you'd probably be ok for a long trip like that - you won't use the brakes a great deal since most of your trip will be on the Interstate. The rotors NAPA has will probably be fine if you'd rather not wait to get Rusty's. Larry T (67 MGB, 74 911, 78 240D, 91 300D) www.youroil.net for Oil Analysis and Weber Parts Test Results http://members.rennlist.com/oil PORSCHE POSTERS! youroil.net Weber Carb Info http://members.rennlist.com/webercarbs . - Original Message - From: Craig McCluskey [EMAIL PROTECTED] To: mercedes mercedes@okiebenz.com Sent: Sunday, October 07, 2007 10:22 PM Subject: [MBZ] Brake disks Well, I was able to get one wheel bearing seal in place successfully using a piece of 2x4, a hammer, and going very slowly. I did notice that the brake disk looked a little thin, so I looked up the spec in the shop manual: 10.6 mm = 0.417. Mine measures 0.385. I presume this means I should change the disk before I put it back together and drive it 2500 miles. Correct? Having already overnighted seals from Rusty (he sent the other part number the second time and the right ones came) but not been able to leave for the IowaQ because of a sick wife, I have gotten the word that the wife wants to leave town at the end of the week when she expects to feel better. So I guess I'd better get it fixed. Or drive the Big Red Van (a 1989 Chevy S20 Sportvan Beauxville) which gets 15 mpg. NAPA had seals that looked wrong, I wonder if they have the correct brake disks? Craig ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.488 / Virus Database: 269.14.4/1055 - Release Date: 10/7/2007 10:24 AM ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] '87 300d
Are the underbody panels available from MB? If so, I assume they;re expensive? I would think the panels could be fabricated without too much trouble. The fiberglass doesnt have to be very thick and there's plenty of acoustic material available. I guess if there were a market for them someone would make them? Larry T (67 MGB, 74 911, 78 240D, 91 300D) www.youroil.net for Oil Analysis and Weber Parts Test Results http://members.rennlist.com/oil PORSCHE POSTERS! youroil.net Weber Carb Info http://members.rennlist.com/webercarbs . - Original Message - From: Alex Chamberlain [EMAIL PROTECTED] To: Mercedes Discussion List mercedes@okiebenz.com Sent: Monday, October 08, 2007 1:47 AM Subject: Re: [MBZ] '87 300d On 10/7/07, Mitch Haley [EMAIL PROTECTED] wrote: Peter Frederick wrote: You don't happen to have a set of underbody panels for an 87 300D by any chance? Thanks, Peter. I needed a chuckle. If the old car is in your possession, take them. They aren't cheap, and they don't exist on the used market. Did anybody ever do a successful install of 90-93 panels on a 1987? Kaleb thinks it'll work. If I knew for sure it would, I'd shell out for a new set. I'm not going to be the list guinea pig on this one, though. ;) Alex Chamberlain '87 300D Turbo et al. ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.488 / Virus Database: 269.14.4/1055 - Release Date: 10/7/2007 10:24 AM ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] Help with Shop Manual CD
That was probably Steve Nervig's index. http://web.mac.com/dakota/Mercedes/Mercedes_Pages.html Wray On 10/8/07, Luther [EMAIL PROTECTED] wrote: Where can Steve Nervig's index be found?? -- OK Don, KD5NRO Norman, OK There are three kinds of lies: lies, damn lies, and statistics. -Benjamin Disraeli '90 300D, '87 300SDL, '81 240D, '78 450SLC, '97 Ply Grand Voyager ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] TEST
Yup. On 10/8/07, Kevin Kraly [EMAIL PROTECTED] wrote: I guess I'm up and runnin' now since it just came through. -- OK Don, KD5NRO Norman, OK There are three kinds of lies: lies, damn lies, and statistics. -Benjamin Disraeli '90 300D, '87 300SDL, '81 240D, '78 450SLC, '97 Ply Grand Voyager ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] '87 300d
What is different? Its the same body so I dont know why they wouldnt work. --- Kaleb C. Striplin Cox Auto Trader 730 FSBO Supervisor - Original Message - From: Mitch Haley [EMAIL PROTECTED] To: Mercedes Discussion List mercedes@okiebenz.com Sent: Sunday, October 07, 2007 9:05 PM Subject: Re: [MBZ] '87 300d Peter Frederick wrote: You don't happen to have a set of underbody panels for an 87 300D by any chance? Thanks, Peter. I needed a chuckle. If the old car is in your possession, take them. They aren't cheap, and they don't exist on the used market. Did anybody ever do a successful install of 90-93 panels on a 1987? ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] OT: 5kW Chinese Genset
Hit the delete button, thats what its for. As far as clogging up your box, this thread has been a very small part of the overall list traffic. --- Kaleb C. Striplin Cox Auto Trader 730 FSBO Supervisor - Original Message - From: [EMAIL PROTECTED] To: mercedes@okiebenz.com Sent: Sunday, October 07, 2007 10:48 PM Subject: Re: [MBZ] OT: 5kW Chinese Genset Nothing personal here guys, but what does?this have to do with Mercedes? Just inquiring because this post has been up for quite some time now and its clogging up my mail box. Could this discussion be done off the site? Please... Harry 69 280 SEL 72 350SL ? 04 VW Passat 4 Motion 1999 Mazda Miata ? ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] TEST
you failed --- Kaleb C. Striplin Cox Auto Trader 730 FSBO Supervisor - Original Message - From: Kevin Kraly [EMAIL PROTECTED] To: Mercedes Discussion List mercedes@okiebenz.com Sent: Monday, October 08, 2007 3:41 AM Subject: [MBZ] TEST Did I pass? I sent a message earlier that didn't come through. Kevin in Hillsboro, OR 1983 300SD 267Kmi, Ursula ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] axle needed 79 300TD
1 year, same as all our parts. Rusty Cullens BuyMBparts, Inc. Tel 1-800-741-5252 Fax 770-454-9745 - Original Message - From: John Robbins [EMAIL PROTECTED] To: Mercedes Discussion List mercedes@okiebenz.com Sent: Friday, October 05, 2007 4:03 PM Subject: Re: [MBZ] axle needed 79 300TD Rusty Cullens wrote: Yes, yes, yes. Good deal! They have a good warranty? John ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] axle needed 79 300TD
No, no, no. Rusty Cullens BuyMBparts, Inc. Tel 1-800-741-5252 Fax 770-454-9745 - Original Message - From: R A Bennell [EMAIL PROTECTED] To: Mercedes Discussion List mercedes@okiebenz.com Sent: Friday, October 05, 2007 4:15 PM Subject: Re: [MBZ] axle needed 79 300TD How far does this go on? Does Rusty come and install them too? Randy -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of John Robbins Sent: Friday, October 05, 2007 3:04 PM To: Mercedes Discussion List Subject: Re: [MBZ] axle needed 79 300TD Rusty Cullens wrote: Yes, yes, yes. Good deal! They have a good warranty? John ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] axle needed 79 300TD
I think you should drive around in a van, installing axles. It's not like you have anything else to do.. Thanks, Tom Hargrave www.kegkits.com 256-656-1924 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Rusty Cullens Sent: Monday, October 08, 2007 8:40 AM To: Mercedes Discussion List Subject: Re: [MBZ] axle needed 79 300TD No, no, no. Rusty Cullens BuyMBparts, Inc. Tel 1-800-741-5252 Fax 770-454-9745 - Original Message - From: R A Bennell [EMAIL PROTECTED] To: Mercedes Discussion List mercedes@okiebenz.com Sent: Friday, October 05, 2007 4:15 PM Subject: Re: [MBZ] axle needed 79 300TD How far does this go on? Does Rusty come and install them too? Randy -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of John Robbins Sent: Friday, October 05, 2007 3:04 PM To: Mercedes Discussion List Subject: Re: [MBZ] axle needed 79 300TD Rusty Cullens wrote: Yes, yes, yes. Good deal! They have a good warranty? John ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] axle needed 79 300TD
I think you should drive around in a van, installing axles. It's not like you have anything else to do.. If yer a chick, you could paint a flower on the side and go by the name Axle Rose. -- Jim ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] axle needed 79 300TD
Opps. Tom's making light of the Part's Diety On Columbus day no less. I for one am greatfull fot the fact that the dedicated staff at BUYMYVARIOUS are all working! Pete, The Token Yankee -- Original message -- From: Tom Hargrave [EMAIL PROTECTED] I think you should drive around in a van, installing axles. It's not like you have anything else to do.. Thanks, Tom Hargrave www.kegkits.com 256-656-1924 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Rusty Cullens Sent: Monday, October 08, 2007 8:40 AM To: Mercedes Discussion List Subject: Re: [MBZ] axle needed 79 300TD No, no, no. Rusty Cullens BuyMBparts, Inc. Tel 1-800-741-5252 Fax 770-454-9745 - Original Message - From: R A Bennell To: Mercedes Discussion List Sent: Friday, October 05, 2007 4:15 PM Subject: Re: [MBZ] axle needed 79 300TD How far does this go on? Does Rusty come and install them too? Randy -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of John Robbins Sent: Friday, October 05, 2007 3:04 PM To: Mercedes Discussion List Subject: Re: [MBZ] axle needed 79 300TD Rusty Cullens wrote: Yes, yes, yes. Good deal! They have a good warranty? John ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] axle needed 79 300TD
So, you are a token Yankee? I'm what's called a damn Yankee. I moved down here vow to never return North to Buffalo, NY. By the way, I'm a great fan of Rusty's business and I would buy more from him if I drove my Mercedes more than I do. Problem is, my Jeep costs less per mile to drive than my SDL and I drive about 50,000 miles / year. Thanks, Tom Hargrave www.kegkits.com 256-656-1924 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Monday, October 08, 2007 8:57 AM To: Mercedes Discussion List Subject: Re: [MBZ] axle needed 79 300TD Opps. Tom's making light of the Part's Diety On Columbus day no less. I for one am greatfull fot the fact that the dedicated staff at BUYMYVARIOUS are all working! Pete, The Token Yankee -- Original message -- From: Tom Hargrave [EMAIL PROTECTED] I think you should drive around in a van, installing axles. It's not like you have anything else to do.. Thanks, Tom Hargrave www.kegkits.com 256-656-1924 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Rusty Cullens Sent: Monday, October 08, 2007 8:40 AM To: Mercedes Discussion List Subject: Re: [MBZ] axle needed 79 300TD No, no, no. Rusty Cullens BuyMBparts, Inc. Tel 1-800-741-5252 Fax 770-454-9745 - Original Message - From: R A Bennell To: Mercedes Discussion List Sent: Friday, October 05, 2007 4:15 PM Subject: Re: [MBZ] axle needed 79 300TD How far does this go on? Does Rusty come and install them too? Randy -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of John Robbins Sent: Friday, October 05, 2007 3:04 PM To: Mercedes Discussion List Subject: Re: [MBZ] axle needed 79 300TD Rusty Cullens wrote: Yes, yes, yes. Good deal! They have a good warranty? John ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] axle needed 79 300TD
Great idea, I'll give it some thought...not. Rusty Cullens BuyMBparts, Inc. Tel 1-800-741-5252 Fax 770-454-9745 - Original Message - From: Tom Hargrave [EMAIL PROTECTED] To: 'Mercedes Discussion List' mercedes@okiebenz.com Sent: Monday, October 08, 2007 9:45 AM Subject: Re: [MBZ] axle needed 79 300TD I think you should drive around in a van, installing axles. It's not like you have anything else to do.. Thanks, Tom Hargrave www.kegkits.com 256-656-1924 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Rusty Cullens Sent: Monday, October 08, 2007 8:40 AM To: Mercedes Discussion List Subject: Re: [MBZ] axle needed 79 300TD No, no, no. Rusty Cullens BuyMBparts, Inc. Tel 1-800-741-5252 Fax 770-454-9745 - Original Message - From: R A Bennell [EMAIL PROTECTED] To: Mercedes Discussion List mercedes@okiebenz.com Sent: Friday, October 05, 2007 4:15 PM Subject: Re: [MBZ] axle needed 79 300TD How far does this go on? Does Rusty come and install them too? Randy -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of John Robbins Sent: Friday, October 05, 2007 3:04 PM To: Mercedes Discussion List Subject: Re: [MBZ] axle needed 79 300TD Rusty Cullens wrote: Yes, yes, yes. Good deal! They have a good warranty? John ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] axle needed 79 300TD
At 09:54 AM 10/8/2007, you wrote: I think you should drive around in a van, installing axles. It's not like you have anything else to do.. If yer a chick, you could paint a flower on the side and go by the name Axle Rose. -- Jim Groan Fred Moir Lynn MA 190DT (Bent) 300TD (Hibernating) 260E (maybe traded for a DIESEL) Diesel Rules! ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] Mercedes Digest, Vol 23, Issue 23
Sun, 7 Oct 2007 20:22:32 -0600 Craig McCluskey [EMAIL PROTECTED] wrote Subject: [MBZ] Brake disks Well, I was able to get one wheel bearing seal in place successfully using a piece of 2x4, a hammer, and going very slowly. I did notice that the brake disk looked a little thin, so I looked up the spec in the shop manual: 10.6 mm = 0.417. Mine measures 0.385. I presume this means I should change the disk before I put it back together and drive it 2500 miles. Correct? _ Minimum brake disk thickesses are usually intended to protect the calipers from overtravel of the pistons. With new pads you should be able to cheat a little. Don't try to cheat for the life of the new pads. You didn't hear this from me. NAPA had seals that looked wrong, I wonder if they have the correct brake disks? Here they have the cheapest 123 replacement disks. ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] Mercedes Digest, Vol 23, Issue 23
On Mon, 8 Oct 2007 11:49:39 -0500 Robert Bigham [EMAIL PROTECTED] wrote: Minimum brake disk thickesses are usually intended to protect the calipers from overtravel of the pistons. With new pads you should be able to cheat a little. Don't try to cheat for the life of the new pads. Great idea. And seeing my pads are thin, almost down to the wear sensors, going back to a new-pad thickness would buy some time for parts to arrive. Living out in the boonies of northern New Mexico can be a drag sometimes. You didn't hear this from me. Hear what from you? :-) Here they have the cheapest 123 replacement disks. It sounds like I should get a cheap set of pads from NAPA and then order all the right stuff from Rusty. Thanks, Craig ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] axle needed 79 300TD
Down here it's not necessary to say damned yankee. You say yankee and the damned is assumed... :^) Gary Thompson Georgetown, TX On 10/8/07, Tom Hargrave [EMAIL PROTECTED] wrote: So, you are a token Yankee? I'm what's called a damn Yankee. I moved down here vow to never return North to Buffalo, NY. ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] 5kW Chinese Genset
Celebrating the 500th time this header has appeared. RLE ** See what's new at http://www.aol.com ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] home made panels?
I would think the panels could be fabricated without too much trouble. The fiberglass doesnt have to be very thick and there's plenty of acoustic material available. Never worked with fiberglass fabrication, have you? RLE ** See what's new at http://www.aol.com ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
[MBZ] outside temp gauge on W124
Hey everyone, Small problem, Not a big deal, but got my attention. Seem the outside temp gauge, the digital on, is stuck on -38C. Not sure if they go and default to this, but we've had some real warm days here, so the gauge is about 100C out. hee hee. Anything I can pull apart and check? If not, I can just roll the window down and stick my head out, as I've done for the bast 25 years. Thanks, Ed 300E ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] outside temp gauge on W124
That car is done for, I will dispose of it for $500. --- Kaleb C. Striplin Cox Auto Trader 730 FSBO Supervisor - Original Message - From: E M [EMAIL PROTECTED] To: Mercedes Discussion List mercedes@okiebenz.com Sent: Monday, October 08, 2007 4:45 PM Subject: [MBZ] outside temp gauge on W124 Hey everyone, Small problem, Not a big deal, but got my attention. Seem the outside temp gauge, the digital on, is stuck on -38C. Not sure if they go and default to this, but we've had some real warm days here, so the gauge is about 100C out. hee hee. Anything I can pull apart and check? If not, I can just roll the window down and stick my head out, as I've done for the bast 25 years. Thanks, Ed 300E ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] '87 300d
What are the underbody panels you are referring to? Steve -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of LarryT Sent: Monday, October 08, 2007 6:54 AM To: Mercedes Discussion List Subject: Re: [MBZ] '87 300d Are the underbody panels available from MB? If so, I assume they;re expensive? I would think the panels could be fabricated without too much trouble. The fiberglass doesnt have to be very thick and there's plenty of acoustic material available. I guess if there were a market for them someone would make them? Larry T (67 MGB, 74 911, 78 240D, 91 300D) www.youroil.net for Oil Analysis and Weber Parts Test Results http://members.rennlist.com/oil PORSCHE POSTERS! youroil.net Weber Carb Info http://members.rennlist.com/webercarbs . - Original Message - From: Alex Chamberlain [EMAIL PROTECTED] To: Mercedes Discussion List mercedes@okiebenz.com Sent: Monday, October 08, 2007 1:47 AM Subject: Re: [MBZ] '87 300d On 10/7/07, Mitch Haley [EMAIL PROTECTED] wrote: Peter Frederick wrote: You don't happen to have a set of underbody panels for an 87 300D by any chance? Thanks, Peter. I needed a chuckle. If the old car is in your possession, take them. They aren't cheap, and they don't exist on the used market. Did anybody ever do a successful install of 90-93 panels on a 1987? Kaleb thinks it'll work. If I knew for sure it would, I'd shell out for a new set. I'm not going to be the list guinea pig on this one, though. ;) Alex Chamberlain '87 300D Turbo et al. ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.488 / Virus Database: 269.14.4/1055 - Release Date: 10/7/2007 10:24 AM ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] '87 300d
There's 2 - one covers the underside area of the transmission and another covers the bottom of the engine. My '91 300D has both in place, but I understand many were removed and not replaced then lost. Not only do they keep the engine clean, but they help reduce noise levels greatly. My '78 240D doesn;t have them but it may not have ever had them to begin with. Not sure when MB started installing them. Larry T (67 MGB, 74 911, 78 240D, 91 300D) www.youroil.net for Oil Analysis and Weber Parts Test Results http://members.rennlist.com/oil PORSCHE POSTERS! youroil.net Weber Carb Info http://members.rennlist.com/webercarbs . - Original Message - From: Steve Bailey [EMAIL PROTECTED] To: 'Mercedes Discussion List' mercedes@okiebenz.com Sent: Monday, October 08, 2007 6:32 PM Subject: Re: [MBZ] '87 300d What are the underbody panels you are referring to? Steve -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of LarryT Sent: Monday, October 08, 2007 6:54 AM To: Mercedes Discussion List Subject: Re: [MBZ] '87 300d Are the underbody panels available from MB? If so, I assume they;re expensive? I would think the panels could be fabricated without too much trouble. The fiberglass doesnt have to be very thick and there's plenty of acoustic material available. I guess if there were a market for them someone would make them? Larry T (67 MGB, 74 911, 78 240D, 91 300D) www.youroil.net for Oil Analysis and Weber Parts Test Results http://members.rennlist.com/oil PORSCHE POSTERS! youroil.net Weber Carb Info http://members.rennlist.com/webercarbs . - Original Message - From: Alex Chamberlain [EMAIL PROTECTED] To: Mercedes Discussion List mercedes@okiebenz.com Sent: Monday, October 08, 2007 1:47 AM Subject: Re: [MBZ] '87 300d On 10/7/07, Mitch Haley [EMAIL PROTECTED] wrote: Peter Frederick wrote: You don't happen to have a set of underbody panels for an 87 300D by any chance? Thanks, Peter. I needed a chuckle. If the old car is in your possession, take them. They aren't cheap, and they don't exist on the used market. Did anybody ever do a successful install of 90-93 panels on a 1987? Kaleb thinks it'll work. If I knew for sure it would, I'd shell out for a new set. I'm not going to be the list guinea pig on this one, though. ;) Alex Chamberlain '87 300D Turbo et al. ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.488 / Virus Database: 269.14.4/1055 - Release Date: 10/7/2007 10:24 AM ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.488 / Virus Database: 269.14.4/1057 - Release Date: 10/8/2007 9:04 AM ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] '87 300d
I don't see them on my 87 300d, but Pull-a-part emailed me this week that they got the same car in on the lot this week. I may have to go for a ride and see if they are there. Steve -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of LarryT Sent: Monday, October 08, 2007 7:08 PM To: Mercedes Discussion List Subject: Re: [MBZ] '87 300d There's 2 - one covers the underside area of the transmission and another covers the bottom of the engine. My '91 300D has both in place, but I understand many were removed and not replaced then lost. Not only do they keep the engine clean, but they help reduce noise levels greatly. My '78 240D doesn;t have them but it may not have ever had them to begin with. Not sure when MB started installing them. Larry T (67 MGB, 74 911, 78 240D, 91 300D) www.youroil.net for Oil Analysis and Weber Parts Test Results http://members.rennlist.com/oil PORSCHE POSTERS! youroil.net Weber Carb Info http://members.rennlist.com/webercarbs . - Original Message - From: Steve Bailey [EMAIL PROTECTED] To: 'Mercedes Discussion List' mercedes@okiebenz.com Sent: Monday, October 08, 2007 6:32 PM Subject: Re: [MBZ] '87 300d What are the underbody panels you are referring to? Steve -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of LarryT Sent: Monday, October 08, 2007 6:54 AM To: Mercedes Discussion List Subject: Re: [MBZ] '87 300d Are the underbody panels available from MB? If so, I assume they;re expensive? I would think the panels could be fabricated without too much trouble. The fiberglass doesnt have to be very thick and there's plenty of acoustic material available. I guess if there were a market for them someone would make them? Larry T (67 MGB, 74 911, 78 240D, 91 300D) www.youroil.net for Oil Analysis and Weber Parts Test Results http://members.rennlist.com/oil PORSCHE POSTERS! youroil.net Weber Carb Info http://members.rennlist.com/webercarbs . - Original Message - From: Alex Chamberlain [EMAIL PROTECTED] To: Mercedes Discussion List mercedes@okiebenz.com Sent: Monday, October 08, 2007 1:47 AM Subject: Re: [MBZ] '87 300d On 10/7/07, Mitch Haley [EMAIL PROTECTED] wrote: Peter Frederick wrote: You don't happen to have a set of underbody panels for an 87 300D by any chance? Thanks, Peter. I needed a chuckle. If the old car is in your possession, take them. They aren't cheap, and they don't exist on the used market. Did anybody ever do a successful install of 90-93 panels on a 1987? Kaleb thinks it'll work. If I knew for sure it would, I'd shell out for a new set. I'm not going to be the list guinea pig on this one, though. ;) Alex Chamberlain '87 300D Turbo et al. ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.488 / Virus Database: 269.14.4/1055 - Release Date: 10/7/2007 10:24 AM ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.488 / Virus Database: 269.14.4/1057 - Release Date: 10/8/2007 9:04 AM ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] '87 300d
They also keep the engine cooler by directing the airflow across the radiator out under the car. It really does make a difference, especially on the highway. I'll have to pull the ones of my old car, probably need to rescue it from the towing service soon, even if I'm not paying for storage there. Making them from fiberglass wouldn't be hard, once you had a mold (lol). Peter ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] outside temp gauge on W124
Ed, I have a good one for sale for $50.00 + $5.00 S H. Darrell w. Sigmon ~~~ - Original Message - From: E M [EMAIL PROTECTED] To: Mercedes Discussion List mercedes@okiebenz.com Sent: Monday, October 08, 2007 5:45 PM Subject: [MBZ] outside temp gauge on W124 Hey everyone, Small problem, Not a big deal, but got my attention. Seem the outside temp gauge, the digital on, is stuck on -38C. Not sure if they go and default to this, but we've had some real warm days here, so the gauge is about 100C out. hee hee. Anything I can pull apart and check? If not, I can just roll the window down and stick my head out, as I've done for the bast 25 years. Thanks, Ed 300E ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com -- next part -- A non-text attachment was scrubbed... Name: not available Type: image/gif Size: 3808 bytes Desc: not available Url : http://okiebenz.com/pipermail/mercedes_okiebenz.com/attachments/20071008/2f980c8c/attachment.gif ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] 5kW Chinese Genset
Well - it's actually 75, but who's counting? On 10/8/07, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote: Celebrating the 500th time this header has appeared. -- OK Don, KD5NRO Norman, OK There are three kinds of lies: lies, damn lies, and statistics. -Benjamin Disraeli '90 300D, '87 300SDL, '81 240D, '78 450SLC, '97 Ply Grand Voyager ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] outside temp gauge on W124
On 10/8/07, E M [EMAIL PROTECTED] wrote: Not a big deal, but got my attention. Seem the outside temp gauge, the digital on, is stuck on -38C. Not sure if they go and default to this, but we've had some real warm days here, so the gauge is about 100C out. hee hee. Anything I can pull apart and check? If not, I can just roll the window down and stick my head out, as I've done for the bast 25 years. Probably the display module in the instrument panel (a single unit with the LCD). They seem to go bad if you look at them funny. While you have the panel out you can lubricate the speedometer cable (stops it jittering at low speeds), change all the bulbs and the Red Fuse, and repaint the sun-faded needles if you're really anal. It's also easier to get the left and center dash vents out at that time to clean them and change the bulbs, too. Alex Chamberlain '87 300D Turbo et al. ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] outside temp gauge on W124
The thermistor that drives the gauge is behind the front bumper. If the leads are corroded and have high resistance, it will read incorrectly one way, shorted or grounded on the feed side it will read the other (I think very low temp would be an open circuit). My new 300D reads +130 C all the time, I suspect it's shorted. Peter ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
[MBZ] IowaQ weather forecast
Saturday: low of 49F, high of 67F. -- LT Don http://don.homelinux.net/~don/ Proudly marching to the beat of a different kettle of fish. Make a small loan, Make a big difference - Kiva.org ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] outside temp gauge on W124
On Mon, 8 Oct 2007 17:30:32 -0700 Alex Chamberlain [EMAIL PROTECTED] wrote: While you have the panel out you can lubricate the speedometer cable (stops it jittering at low speeds), What kind of lubricant should one use on a speedometer cable? Craig ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] outside temp gauge on W124
On 10/8/07, Craig McCluskey [EMAIL PROTECTED] wrote: On Mon, 8 Oct 2007 17:30:32 -0700 Alex Chamberlain [EMAIL PROTECTED] wrote: While you have the panel out you can lubricate the speedometer cable (stops it jittering at low speeds), What kind of lubricant should one use on a speedometer cable? I dribbled some ATF down mine, on somebody's recommendation in the archives (Jim C.?). Alex Chamberlain '87 300D Turbo et al. ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] 5kW Chinese Genset
I'm just waiting till the discussion gets around to Chinese guns. [EMAIL PROTECTED] wrote: Celebrating the 500th time this header has appeared. RLE ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] 5kW Chinese Genset
On Tue, 09 Oct 2007 11:20:07 +0930 Hendrik Fay [EMAIL PROTECTED] wrote: I'm just waiting till the discussion gets around to Chinese guns. Oh, boy! You really know how to hijack a thread, don't you! :-) Craig ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] 5kW Chinese Genset
I don't think it will take off, perhaps one or two posts along the lines of Chinese guns = rubbish and a couple of posts agreeing that if it ain't American or Euro iron it ain't worth shooting. Craig McCluskey wrote: On Tue, 09 Oct 2007 11:20:07 +0930 Hendrik Fay [EMAIL PROTECTED] wrote: I'm just waiting till the discussion gets around to Chinese guns. Oh, boy! You really know how to hijack a thread, don't you! :-) Craig ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] outside temp gauge on W124
First think I would try is to disconnect the battery, cheap and easy to do. E M wrote: Hey everyone, Small problem, Not a big deal, but got my attention. Seem the outside temp gauge, the digital on, is stuck on -38C. Not sure if they go and default to this, but we've had some real warm days here, so the gauge is about 100C out. hee hee. Anything I can pull apart and check? If not, I can just roll the window down and stick my head out, as I've done for the bast 25 years. Thanks, Ed 300E ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] outside temp gauge on W124
my 95 124 st wgn exhibited that problem after a plowed into a 3 feet wall of water. took several days for everything to dry out and then the a/c temp gauge started working properly. thanks, alan levens in cc,tx -Original Message- From: Hendrik Fay [EMAIL PROTECTED] To: Mercedes Discussion List mercedes@okiebenz.com Sent: Mon, 8 Oct 2007 9:16 pm Subject: Re: [MBZ] outside temp gauge on W124 First think I would try is to disconnect the battery, cheap and easy to do. E M wrote: Hey everyone, Small problem, Not a big deal, but got my attention. Seem the outside temp gauge, the digital on, is stuck on -38C. Not sure if they go and default to this, but we've had some real warm days here, so the gauge is about 100C out. hee hee. Anything I can pull apart and check? If not, I can just roll the window down and stick my head out, as I've done for the bast 25 years. Thanks, Ed 300E ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com Email and AIM finally together. You've gotta check out free AOL Mail! - http://mail.aol.com ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] Brake disks
A thin disk below min. will warp soon in the rain or puddle of water mak - Original Message - From: Craig McCluskey [EMAIL PROTECTED] To: mercedes mercedes@okiebenz.com Sent: Monday, October 08, 2007 7:22 AM Subject: [MBZ] Brake disks Well, I was able to get one wheel bearing seal in place successfully using a piece of 2x4, a hammer, and going very slowly. I did notice that the brake disk looked a little thin, so I looked up the spec in the shop manual: 10.6 mm = 0.417. Mine measures 0.385. I presume this means I should change the disk before I put it back together and drive it 2500 miles. Correct? Having already overnighted seals from Rusty (he sent the other part number the second time and the right ones came) but not been able to leave for the IowaQ because of a sick wife, I have gotten the word that the wife wants to leave town at the end of the week when she expects to feel better. So I guess I'd better get it fixed. Or drive the Big Red Van (a 1989 Chevy S20 Sportvan Beauxville) which gets 15 mpg. NAPA had seals that looked wrong, I wonder if they have the correct brake disks? Craig ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.476 / Virus Database: 269.13.39/1045 - Release Date: 10/2/2007 6:43 PM ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] outside temp gauge on W124
I dribbled some ATF down mine, on somebody's recommendation in the archives (Jim C.?). I've used ATF. I've also used M1 5W20. -- Jim ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
[MBZ] Zerex G-05
Dear all, This most likely has been addressed before by this august forum, but I forgot how often the coolant should be changed. Every 30 K? 3 years? Where do you get it these days? Used to be NAPA for my location. Thanks. David 83 300 DT - Tonight's top picks. What will you watch tonight? Preview the hottest shows on Yahoo! TV. ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com