Re: [MBZ] '86 SDL no a/c

2008-06-18 Thread Luther
That sensor plug is keyed and cannot be reversed?  I've applied some Deoxit to 
all of the coolant sensor connectors.  I've checked the resistances of all of 
the coolant sensors, and the 3 pronged green (see the picture link) showed open 
to ground, and open across all 3 combinations of prongs.  Sounds like it isn't 
good?

picture is here: http://www.gulseth.net/photos/coolant-sensor.jpg
Luther

On Wed, 18 Jun 2008 15:36:34 -0500, OK Don <[EMAIL PROTECTED]> wrote:

> I believe that the coolant sensor for the ACC is in a dual element
> sensor on the engine - one set of pins for the ACC, the other for the
> idle control.  The AC on my SDL would turn off the compressor as soon
> as the coolant hit 80C - the PO had reversed the sets of wires on that
> sensor. The AC worked great after I switched those two  plugs.
>
> On Wed, Jun 18, 2008 at 1:24 PM, Luther <[EMAIL PROTECTED]> wrote:
>> OK, test results are all normal except for the following:
>> Sensor Ground test, Pin 8 (coolant temp)=open
>> Vacuum flaps, pin 8 (short DEF Flap)=1k ohms
>>
>> Maybe I have a bad (hopefully unplugged) coolant sensor.
>



-- 
Luther   KB5QHUAlma, Ark
'87 300SDL (272,xxx mi) head case
'85 Ford F250 6.9 diesel (x58,xxx mi)
'82 300CD (166 kmi)
'82 300D  (74 kmi) getting donor engine-sold
'85 300D (280,176) parts car sans engine

___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] anyone know how to shrink straw hat?

2008-06-18 Thread Rich Thomas
The best way would be to soak it (the hat not your head, though that 
might expandyour head  some to fit the hat) and then leave it sit in the 
sun to dry.

The other approach would be to become a politician, then you would have 
to stretch all the hats to fit your head.

--R

Gary Hurst wrote:
> i bought some cheap chinese clearance hats mail order.  my head measures
> about 59 1/2 cm and it seems from my adventure at the western store messing
> with cowboy hats that a 7 1/2 works best for me in a nice stiff stetson.
> this would make me an XL on the charts, so i order 3 very cheap chinese
> straw hats, one in large and two in xl.  two of them fit well enough, but
> the third is just way too big.  i would not get enough on a return to make
> it worth shipping back.  i don't like the idea of just throwing it out and i
> don't happen to know any giant headed people who might want it.
>
> and thoughts on how to shrink it?  what about wearing it with an 80s style
> sweatband?
> ___
> http://www.okiebenz.com
> For new parts see official list sponsor: http://www.buymbparts.com/
> For used parts email [EMAIL PROTECTED]
>
> To Unsubscribe or change delivery options go to:
> http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>
>
>   

___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] '86 SDL no a/c

2008-06-18 Thread Donald Snook
Wilton wrote: "Donald, if I were there, I'd do it for ya free and with pleasure 
- ya wouldn't be able to tell it had been "added" later.  Installed several of 
'em in old houses 35 to 40 years ago.  'Have also built several kitchens and 
houses "from scratch."  20 years ago, 'also restored 2 large Victorian mansions 
on National Register of Historic Places plus the 100+ year old Georgian 
Colonial Revival house I live in."

"BTW, I delivered a B-52 to the Boeing plant at Wichita 2 Jan 1973, nonstop 
from Guam immediately after 6 very interesting trips to Hanoi in late Dec '72."


I wish you were closer, then.  This house has such beautiful woodwork, that I 
don't really want to have somebody botch the job.

Wichita has been the air capital of the world for a long time. The city is 
lucky to have the industry here.


Donald H. Snook

___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] OT California Vacation

2008-06-18 Thread Tom Hargrave
I have to admit, California is a great place to visit.

Thanks,
Tom Hargrave
www.kegkits.com
256-656-1924
 

-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of ernest breakfield
Sent: Monday, June 16, 2008 9:41 PM
To: Mercedes Discussion List
Subject: Re: [MBZ] OT California Vacation

Donald,

it really depends on what you like, or what you're looking for.

solitude or city? upscale, or funky? urban, or unpaved? mountains, 
deserts or ocean?

do you want Sierra snowscape? Mojave moonlight? giant Redwoods at 
the coast? (seriously; don't underestimate the beauty of the desert if 
you're not familiar with it; there are many wonders in the Dez.)
or are you looking for something more 'touristy'; Sea World, 
Disneyland, etc.,? (Universal Studios might be out of the picture for a 
while; i don't know how they're recovering from their recent fires.)
looking for a lot of scenery in a couple of days? a train ride 
up/down the coast might be nice,...
if you're into cities, California really only has one; that's San 
Francisco, and you can't go wrong there as long as you realize that 
sumer there isn't necessarily warm and dress appropriately and 
understand that Straight (or anything else) is OK; Narrow is less so.

it's a big state. what's your idea of fun?


cheers!
e

Berkeley
(no, i wasn't born here, but it's not by accident that i'm here now,...)


Donald Snook wrote:
> I thought somebody on here was from California.  My wife and I are
celebrating our 10th Anniversary and are looking for vacation ideas on the
west coast.  Any suggestions?
>
> Donald H. Snook
___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

No virus found in this incoming message.
Checked by AVG. 
Version: 7.5.524 / Virus Database: 270.3.0/1504 - Release Date: 6/15/2008
5:52 PM
 

No virus found in this outgoing message.
Checked by AVG. 
Version: 7.5.524 / Virus Database: 270.4.0/1507 - Release Date: 6/18/2008
7:09 AM
 


___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] Duh

2008-06-18 Thread Timothy Robinson
I think I'm gonna ecuse myself for a while...

I did a few favors, sent a BETA to a guy for free who never said "KMA" in
thank you... then it's junk mail and politica to the tune ofr 105 emails a
day to delete...

See ya'll in the Fall to see if anything's new...

T


___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] 124 evapectomy

2008-06-18 Thread Wilton Strickland
Might a very short Allen wrench on a universal joint with an extension shaft
on a 1/4" ratchet help sufficiently with the expansion valve screws?

Wilton

- Original Message -
From: "Peter Frederick" <[EMAIL PROTECTED]>
To: "Mercedes Discussion List" 
Sent: Wednesday, June 18, 2008 10:27 PM
Subject: Re: [MBZ] 124 evapectomy


> Good thing the new evaporator has a new expansion valve on it, eh?
>
> Actually, they aren't THAT bad so long as you are very careful to get
> the allen wrench properly seated in the two screws that hold the
> valve to the evaporator.
>
> I'll be challanging myself with this over the weekend or early next
> week, as I plan to attempt a flush of my evaporator and want to
> change the o-rings in any case -- new compressor and receiver/dryer
> with a filter in the hose set -- don't see much point in NOT changing
> all the o-rings at the same time!
>
> With any luck, I'll have a working ACC in a few days.
>
> Peter
>
>
> ___
> http://www.okiebenz.com
> For new parts see official list sponsor: http://www.buymbparts.com/
> For used parts email [EMAIL PROTECTED]
>
> To Unsubscribe or change delivery options go to:
> http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] free KFC sandwich

2008-06-18 Thread Wonko the Sane
And a vegetarian sending that, too.

On Wed, Jun 18, 2008 at 10:29 PM, andrew strasfogel <[EMAIL PROTECTED]>
wrote:

> Whoever  said "No good deed goes unpunished" must have had Wonko in mind.
>
> On Wed, Jun 18, 2008 at 4:47 PM, OK Don <[EMAIL PROTECTED]> wrote:
>
> > And second prize is TWO coupons!
> >
> > On Wed, Jun 18, 2008 at 11:41 AM, Wonko the Sane <[EMAIL PROTECTED]>
> > wrote:
> > > http://www.kfc-la.com/print-coupon-value-menu.html
> > >
> > > --
> >
> >
> > --
> > OK Don, KD5NRO
> > Norman, OK
> > "There are three kinds of lies: lies, damn lies, and statistics."
> > -Benjamin Disraeli and/or Mark Twain
> > '90 300D (Rattled), '92 300D (Saber), ' '81 240D (Gramps), '97 Ply
> > Grand Voyager (Vincent van-go)
> >
> > ___
> > http://www.okiebenz.com
> > For new parts see official list sponsor: http://www.buymbparts.com/
> > For used parts email [EMAIL PROTECTED]
> >
> > To Unsubscribe or change delivery options go to:
> > http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> >
> ___
> http://www.okiebenz.com
> For new parts see official list sponsor: http://www.buymbparts.com/
> For used parts email [EMAIL PROTECTED]
>
> To Unsubscribe or change delivery options go to:
> http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>



-- 
LT Don
http://don.homelinux.net/~don/

apt-get update
apt-get upgrade
The following packages will be replaced
Prez
Do you want to continue? [Y/n] Y
___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] What would you do if diesel/gas cost $10/g

2008-06-18 Thread MG
Bill, I have a few recipes somewhere, even very old ones from a book 
from the 1800s. For those little critters you can use one of those 1000 
or 1200fps air rifles. The little rats don't make any noise if you don't 
hit them right so it's a lot easier to get another shot it.

Manfred


Date: Wed, 18 Jun 2008 11:00:01 -0400
From: "Bill R" <[EMAIL PROTECTED]>


   Mom came out yesterday and told me she was getting
  an
awful racket out of her chimney [also covered with wire mesh], so I
  assume
they are trying another assault on the attic.  Good recipes for
  squirrel?  A
few hundred $$ later I have had it with those pests.
BillR

___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] What would you do if diesel/gas cost $10/g

2008-06-18 Thread MG
Yeah, but isn't this all about where you get the food that you can't buy 
because you have to pay that $10/gal?

Manfred



Date: Wed, 18 Jun 2008 09:55:12 -0400
From: "E M" <[EMAIL PROTECTED]>

Wouldn't it be a lot easier to just pay the $10 per/g for the diesel?

Ed
300E

___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] What would you do if diesel/gas cost $10/g

2008-06-18 Thread MG
Yeah thought of that but then you have to go into the neighbors garden 
to get the evidence without being seen and if that works all it takes is 
for someone to see that poor little bunny flopping around from a poor 
shot, I'm not that good anymore, and the jig is up.

Hey Bill doesn't that little puppy of yours like rabbit? Just tell him 
it tastes like chicken!

Manfred



Date: Wed, 18 Jun 2008 05:30:36 -0400
From: Mitch Haley <[EMAIL PROTECTED]>


MG wrote:
 >  As for getting the rabbits, the only really quiet way in a
  neighborhood is
 > to use live traps and then tell people that you are releasing them in
 > the country.

A professionally tuned non-magnum airgun wouldn't be bad, especially if
  you
can shoot from indoors. "Thock" = dead rabbit. Just don't wound it and
  make
it scream. If you want to mess with high pressure air, some of the
  silenced
pre charged pneumatics I've seen at Field Target matches make virtually
  no noise,
just a little click or ping from the hammer tapping the poppet valve.

___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] anyone know how to shrink straw hat?

2008-06-18 Thread Gary Hurst
yeah, that's my thought, except i'm not that confident the hat won't fall
apart. might be worth a shot though.

On Wed, Jun 18, 2008 at 10:27 PM, Wilton Strickland <[EMAIL PROTECTED]>
wrote:

> How 'bout wetting it, then heat it.
>
> Wilton
>
> - Original Message -
> From: "Gary Hurst" <[EMAIL PROTECTED]>
> To: "Banned List" <[EMAIL PROTECTED]>; "Mercedes Discussion List"
> 
> Sent: Wednesday, June 18, 2008 10:04 PM
> Subject: [MBZ] anyone know how to shrink straw hat?
>
>
> > i bought some cheap chinese clearance hats mail order.  my head measures
> > about 59 1/2 cm and it seems from my adventure at the western store
> messing
> > with cowboy hats that a 7 1/2 works best for me in a nice stiff stetson.
> > this would make me an XL on the charts, so i order 3 very cheap chinese
> > straw hats, one in large and two in xl.  two of them fit well enough, but
> > the third is just way too big.  i would not get enough on a return to
> make
> > it worth shipping back.  i don't like the idea of just throwing it out
> and
> i
> > don't happen to know any giant headed people who might want it.
> >
> > and thoughts on how to shrink it?  what about wearing it with an 80s
> style
> > sweatband?
> > ___
> > http://www.okiebenz.com
> > For new parts see official list sponsor: http://www.buymbparts.com/
> > For used parts email [EMAIL PROTECTED]
> >
> > To Unsubscribe or change delivery options go to:
> > http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>
>
> ___
> http://www.okiebenz.com
> For new parts see official list sponsor: http://www.buymbparts.com/
> For used parts email [EMAIL PROTECTED]
>
> To Unsubscribe or change delivery options go to:
> http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>
___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] Antenna replacement

2008-06-18 Thread Craig McCluskey
How about taking this thread to Banned?

Thanks,


Craig

___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] 73 220D....What gear ratio rear diff?

2008-06-18 Thread Craig McCluskey
On Wed, 18 Jun 2008 21:02:31 -0400 (EDT) [EMAIL PROTECTED] wrote:

> What is the gear ratio in the rear diff of my 73 220D with manual
> tranny?

I don't remember for sure and my ancient Chilton's doesn't say. I remember
something above 4:1 (4.11?)


> Also, is fourth gear a 1:1 final drive?

Yes.


Craig

___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


[MBZ] Better pictures than yours

2008-06-18 Thread RELNGSON

http://files.kavefish.com/pictures/collections/pictures_from_the_sky/_index-list.html


**
Gas prices getting you down? Search AOL Autos for 
fuel-efficient used cars.
  (http://autos.aol.com/used?ncid=aolaut000507)
___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] 124 evapectomy

2008-06-18 Thread Peter Frederick
I intend to install mine as the last step before attaching the vacuum  
pump.

Peter

On Jun 18, 2008, at 9:25 PM, Wilton Strickland wrote:

> Yes, changing the drier should be relatively easy, but I'm most  
> concerned
> about not letting it get contaminated before it's serviced  
> properly., and
> refrigeration guy will need to do that.
>
> Wilton
>
> - Original Message -
> From: "Loren Faeth" <[EMAIL PROTECTED]>
> To: "Mercedes Discussion List" 
> Sent: Wednesday, June 18, 2008 9:58 PM
> Subject: Re: [MBZ] 124 evapectomy
>
>
>> If you changed the evap, changing the receiver/drier is
>> easy.  Changing the expansion valve is tricky unless you have a 10 yr
>> old mechanic with small hands.
>>
>> On my scale, I'd rather rebuild an engine than do an evapectomy.   
>> JMHO.
>>
>>
>>
>> At 01:49 PM 6/18/2008, you wrote:
>>> 'Just drove the car ~12 miles; sure is good to be able to drive  
>>> it after
> 2
>>> weeks or so without it - everything seems to be doing very well -
> 'course, I
>>> haven't run the A/C yet.
>>>
>>> 'Just realized:  maybe I should add a bit of coolant to replace  
>>> the half
> cup
>>> or so I lost during the evapectomy.
>>> 'Noticed on this morning's little trip, though, temp didn't get  
>>> over 85C,
> so
>>> no need to get in a panic over it.
>>>
>>> 'Thinking about whether or not I should R&R Freon manifold and dryer
> myself
>>> or take it to the refrigeration guy.  Any tips?
>>>
>>> Wilton
>>>
>>>
>>> ___
>>> http://www.okiebenz.com
>>> For new parts see official list sponsor: http://www.buymbparts.com/
>>> For used parts email [EMAIL PROTECTED]
>>>
>>> To Unsubscribe or change delivery options go to:
>>> http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>>
>> Loren Faeth
>>
>>
>> ___
>> http://www.okiebenz.com
>> For new parts see official list sponsor: http://www.buymbparts.com/
>> For used parts email [EMAIL PROTECTED]
>>
>> To Unsubscribe or change delivery options go to:
>> http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>
>
> ___
> http://www.okiebenz.com
> For new parts see official list sponsor: http://www.buymbparts.com/
> For used parts email [EMAIL PROTECTED]
>
> To Unsubscribe or change delivery options go to:
> http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] incredible service from Rusty

2008-06-18 Thread andrew strasfogel
Why can't we all get along?

On Wed, Jun 18, 2008 at 6:34 PM, Kaleb C. Striplin <[EMAIL PROTECTED]>
wrote:

> hahahahahahahahaha
>
> Luther wrote:
> > I'd only believe Hursty as far as I can throw him.
> >
> > Luther
> >
> > On Wed, 18 Jun 2008 13:15:30 -0500, <[EMAIL PROTECTED]> wrote:
> >
> >> When my quote comes in, all others are not important.  The world
> revolves
> >> around me, or so Hursty says.
> >>
> >>> Actually Kaleb, the quote was 1 day ago at the time of your post. It
> was
> >>> at
> >>> 1:21pm on the 17th. I currently have 165 quotes ahead of yours and I do
> >>> them
> >>> in the order they come in. I believe I told you yesterday that we were
> >>> unusually busy and you replied "that is a good thing". You should have
> an
> >>> answer today. I am very sorry this has upset you so.
> >>>
> >>> Rusty Cullens
> >>> BuyMBparts, Inc.
> >>> Tel 1-800-741-5252
> >>> Fax   770-454-9745
> >>>
> >
> >
> >
>
> --
> Kaleb C. Striplin/Claremore, OK
>  94 E420, 92 300SD, 92 300E 4Matic, 91 300D, 89 560SEL,
>  89 260E, 87 300SDL, 86 560SL, 85 380SE 5.0 Euro,
>  84 190D, 84 300D euro manny, 81 240D, 80 240D, 76 240D,
>  76 300D, 72 250C, 69 250, 66 220SEb
> http://www.okiebenz.com
>
> ___
> http://www.okiebenz.com
> For new parts see official list sponsor: http://www.buymbparts.com/
> For used parts email [EMAIL PROTECTED]
>
> To Unsubscribe or change delivery options go to:
> http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>
___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] anyone know how to shrink straw hat?

2008-06-18 Thread Wilton Strickland
How 'bout wetting it, then heat it.

Wilton

- Original Message -
From: "Gary Hurst" <[EMAIL PROTECTED]>
To: "Banned List" <[EMAIL PROTECTED]>; "Mercedes Discussion List"

Sent: Wednesday, June 18, 2008 10:04 PM
Subject: [MBZ] anyone know how to shrink straw hat?


> i bought some cheap chinese clearance hats mail order.  my head measures
> about 59 1/2 cm and it seems from my adventure at the western store
messing
> with cowboy hats that a 7 1/2 works best for me in a nice stiff stetson.
> this would make me an XL on the charts, so i order 3 very cheap chinese
> straw hats, one in large and two in xl.  two of them fit well enough, but
> the third is just way too big.  i would not get enough on a return to make
> it worth shipping back.  i don't like the idea of just throwing it out and
i
> don't happen to know any giant headed people who might want it.
>
> and thoughts on how to shrink it?  what about wearing it with an 80s style
> sweatband?
> ___
> http://www.okiebenz.com
> For new parts see official list sponsor: http://www.buymbparts.com/
> For used parts email [EMAIL PROTECTED]
>
> To Unsubscribe or change delivery options go to:
> http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] free KFC sandwich

2008-06-18 Thread andrew strasfogel
Whoever  said "No good deed goes unpunished" must have had Wonko in mind.

On Wed, Jun 18, 2008 at 4:47 PM, OK Don <[EMAIL PROTECTED]> wrote:

> And second prize is TWO coupons!
>
> On Wed, Jun 18, 2008 at 11:41 AM, Wonko the Sane <[EMAIL PROTECTED]>
> wrote:
> > http://www.kfc-la.com/print-coupon-value-menu.html
> >
> > --
>
>
> --
> OK Don, KD5NRO
> Norman, OK
> "There are three kinds of lies: lies, damn lies, and statistics."
> -Benjamin Disraeli and/or Mark Twain
> '90 300D (Rattled), '92 300D (Saber), ' '81 240D (Gramps), '97 Ply
> Grand Voyager (Vincent van-go)
>
> ___
> http://www.okiebenz.com
> For new parts see official list sponsor: http://www.buymbparts.com/
> For used parts email [EMAIL PROTECTED]
>
> To Unsubscribe or change delivery options go to:
> http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>
___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] 124 evapectomy

2008-06-18 Thread Peter Frederick
Good thing the new evaporator has a new expansion valve on it, eh?

Actually, they aren't THAT bad so long as you are very careful to get  
the allen wrench properly seated in the two screws that hold the  
valve to the evaporator.

I'll be challanging myself with this over the weekend or early next  
week, as I plan to attempt a flush of my evaporator and want to  
change the o-rings in any case -- new compressor and receiver/dryer  
with a filter in the hose set -- don't see much point in NOT changing  
all the o-rings at the same time!

With any luck, I'll have a working ACC in a few days.

Peter


___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] 124 evapectomy

2008-06-18 Thread Wilton Strickland
Yes, changing the drier should be relatively easy, but I'm most concerned
about not letting it get contaminated before it's serviced properly., and
refrigeration guy will need to do that.

Wilton

- Original Message -
From: "Loren Faeth" <[EMAIL PROTECTED]>
To: "Mercedes Discussion List" 
Sent: Wednesday, June 18, 2008 9:58 PM
Subject: Re: [MBZ] 124 evapectomy


> If you changed the evap, changing the receiver/drier is
> easy.  Changing the expansion valve is tricky unless you have a 10 yr
> old mechanic with small hands.
>
> On my scale, I'd rather rebuild an engine than do an evapectomy.  JMHO.
>
>
>
> At 01:49 PM 6/18/2008, you wrote:
> >'Just drove the car ~12 miles; sure is good to be able to drive it after
2
> >weeks or so without it - everything seems to be doing very well -
'course, I
> >haven't run the A/C yet.
> >
> >'Just realized:  maybe I should add a bit of coolant to replace the half
cup
> >or so I lost during the evapectomy.
> >'Noticed on this morning's little trip, though, temp didn't get over 85C,
so
> >no need to get in a panic over it.
> >
> >'Thinking about whether or not I should R&R Freon manifold and dryer
myself
> >or take it to the refrigeration guy.  Any tips?
> >
> >Wilton
> >
> >
> >___
> >http://www.okiebenz.com
> >For new parts see official list sponsor: http://www.buymbparts.com/
> >For used parts email [EMAIL PROTECTED]
> >
> >To Unsubscribe or change delivery options go to:
> >http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>
> Loren Faeth
>
>
> ___
> http://www.okiebenz.com
> For new parts see official list sponsor: http://www.buymbparts.com/
> For used parts email [EMAIL PROTECTED]
>
> To Unsubscribe or change delivery options go to:
> http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] 124 evapectomy

2008-06-18 Thread Loren Faeth
If you changed the evap, changing the receiver/drier is 
easy.  Changing the expansion valve is tricky unless you have a 10 yr 
old mechanic with small hands.

On my scale, I'd rather rebuild an engine than do an evapectomy.  JMHO.



At 01:49 PM 6/18/2008, you wrote:
>'Just drove the car ~12 miles; sure is good to be able to drive it after 2
>weeks or so without it - everything seems to be doing very well - 'course, I
>haven't run the A/C yet.
>
>'Just realized:  maybe I should add a bit of coolant to replace the half cup
>or so I lost during the evapectomy.
>'Noticed on this morning's little trip, though, temp didn't get over 85C, so
>no need to get in a panic over it.
>
>'Thinking about whether or not I should R&R Freon manifold and dryer myself
>or take it to the refrigeration guy.  Any tips?
>
>Wilton
>
>
>___
>http://www.okiebenz.com
>For new parts see official list sponsor: http://www.buymbparts.com/
>For used parts email [EMAIL PROTECTED]
>
>To Unsubscribe or change delivery options go to:
>http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Loren Faeth 


___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


[MBZ] anyone know how to shrink straw hat?

2008-06-18 Thread Gary Hurst
i bought some cheap chinese clearance hats mail order.  my head measures
about 59 1/2 cm and it seems from my adventure at the western store messing
with cowboy hats that a 7 1/2 works best for me in a nice stiff stetson.
this would make me an XL on the charts, so i order 3 very cheap chinese
straw hats, one in large and two in xl.  two of them fit well enough, but
the third is just way too big.  i would not get enough on a return to make
it worth shipping back.  i don't like the idea of just throwing it out and i
don't happen to know any giant headed people who might want it.

and thoughts on how to shrink it?  what about wearing it with an 80s style
sweatband?
___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


[MBZ] Planes of Fame photo gallery

2008-06-18 Thread RELNGSON
http://home.comcast.net/%7Ebzee1b/Chino/Chino.html


**
Gas prices 
getting you down? Search AOL Autos for fuel-efficient used cars.
  
(http://autos.aol.com/used?ncid=aolaut000507)
___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] '86 SDL no a/c

2008-06-18 Thread Bill Ringgold
Sounds like you know what you are doing on the personal end.  If you are as 
prepared on the professional end [which I would guess you did first] things 
should go well.
BillR

-Original Message-
From: "Luther" <[EMAIL PROTECTED]>
To: "Mercedes Discussion List" 
Sent: 6/18/08 9:42 PM
Subject: Re: [MBZ] '86 SDL no a/c

I have connections for reasonably priced self-employment insurance.  I'm 
figuring in retirement/insurance/taxes all into the picture.  I'm not going to 
quit the night job until I can easily make double in the home repair business.

Luther

On Wed, 18 Jun 2008 18:06:28 -0500, Bill R <[EMAIL PROTECTED]> wrote:

> Luther - Like Kaleb said, I would be certain that you have a source of
> medical insurance and retirement.  You are into fairly high risk activity,
> so even a disability policy would be a good idea.  Get back to me if you
> think you are going to need it.  I fought with my disability company for
> three years prior to a settlement.  There are some things you will need to
> know.  SSD is pretty poor also.  Had I not had a private pension [very safe
> - all funds already in the bank for my full lifetime pension] I would be in
> bad shape now.  I didn't worry too much about healthcare when I was younger,
> now we would be spending about $1,200 - $2,000/month for MD's, cardiac
> procedures and Rx if I didn't have very good insurance.  We will have out of
> pocket of about $1,500 this year instead.  If you can make huge $$$ doing
> home repair and can put enough away for retirement and will not ever get
> sick or injured, then insurance won't matter too much.  Seems to me you said
> you were single.  You could always do what I did and marry someone who has
> great family insurance through her work.
> BillR
>
>




___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


[MBZ] 86SDL no a/c - home repairs

2008-06-18 Thread Wilton Strickland
Luther, honest, competent and conscientious home repairmen with a strong
sense of integrity are in great demand and sorely needed.
I wish you well.

Wilton


___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] '86 SDL no a/c

2008-06-18 Thread Wilton Strickland
Donald, if I were there, I'd do it for ya free and with pleasure - ya
wouldn't be able to tell it had been "added" later.  Installed several of
'em in old houses 35 to 40 years ago.  'Have also built several kitchens and
houses "from scratch."  20 years ago, 'also restored 2 large Victorian
mansions on National Register of Historic Places plus the 100+ year old
Georgian Colonial Revival house I live in.

BTW, I delivered a B-52 to the Boeing plant at Wichita 2 Jan 1973, nonstop
from Guam immediately after 6 very interesting trips to Hanoi in late Dec
'72.

Wilton

- Original Message -
From: "Donald Snook" <[EMAIL PROTECTED]>
To: 
Sent: Wednesday, June 18, 2008 2:22 PM
Subject: Re: [MBZ] '86 SDL no a/c


> Luther wrote: "I'm working on getting my home repair business to the
self-sustaining point."
>
> If you are ever in Wichita, Kansas and want to make a little extra money,
I need somebody really good to install a dishwasher in my house.  My house
was built in 1929 and never has had a dishwasher. So, it would require
cutting into the existing cabinets (next to the sink) and installing the
dishwasher.  Bigger than I can do, plus, I am not that confident in my
ability to do the woodwork necessary.
>
>
> Donald H. Snook
>
> ___
> http://www.okiebenz.com
> For new parts see official list sponsor: http://www.buymbparts.com/
> For used parts email [EMAIL PROTECTED]
>
> To Unsubscribe or change delivery options go to:
> http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] '86 SDL no a/c

2008-06-18 Thread Luther
I have connections for reasonably priced self-employment insurance.  I'm 
figuring in retirement/insurance/taxes all into the picture.  I'm not going to 
quit the night job until I can easily make double in the home repair business.

Luther

On Wed, 18 Jun 2008 18:06:28 -0500, Bill R <[EMAIL PROTECTED]> wrote:

> Luther - Like Kaleb said, I would be certain that you have a source of
> medical insurance and retirement.  You are into fairly high risk activity,
> so even a disability policy would be a good idea.  Get back to me if you
> think you are going to need it.  I fought with my disability company for
> three years prior to a settlement.  There are some things you will need to
> know.  SSD is pretty poor also.  Had I not had a private pension [very safe
> - all funds already in the bank for my full lifetime pension] I would be in
> bad shape now.  I didn't worry too much about healthcare when I was younger,
> now we would be spending about $1,200 - $2,000/month for MD's, cardiac
> procedures and Rx if I didn't have very good insurance.  We will have out of
> pocket of about $1,500 this year instead.  If you can make huge $$$ doing
> home repair and can put enough away for retirement and will not ever get
> sick or injured, then insurance won't matter too much.  Seems to me you said
> you were single.  You could always do what I did and marry someone who has
> great family insurance through her work.
> BillR
>
>



-- 
Luther   KB5QHUAlma, Ark
'87 300SDL (272,xxx mi) head case
'85 Ford F250 6.9 diesel (x58,xxx mi)
'82 300CD (166 kmi)
'82 300D  (74 kmi) getting donor engine-sold
'85 300D (280,176) parts car sans engine

___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


[MBZ] 124 evapectomy

2008-06-18 Thread Wilton Strickland
BTW, the refrigeration guy asked if I wanted him to pass out cards to MB
owners for me.  I thankfully declined.

Wilton


___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


[MBZ] 73 220D....What gear ratio rear diff?

2008-06-18 Thread slozukimc
What is the gear ratio in the rear diff of my 73 220D with manual tranny?
Also, is fourth gear a 1:1 final drive?

Thanks, Mike


___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] Air guns

2008-06-18 Thread Bill R
All the more reason to have those tastefully done business cards with the
car and the rifle and the motto.
BillR

-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Wilton Strickland
Sent: Wednesday, June 18, 2008 8:04 PM
To: Mercedes Discussion List
Subject: Re: [MBZ] Air guns

'Not a "geezer" yet, either.  No, I don't wear shorts, black knee socks and
sandals, though those who do are very welcome and free to do so if they
want.  My "uniform" of the day is almost always full length khaki pants,
light blue short sleeve shirt, black or brown socks and black or brown SAS
shoes, all of proper size and well-laundered, pressed/ironed to complement
the well-groomed "gentleman" within.

Wilton

- Original Message -
From: "Rich Thomas" <[EMAIL PROTECTED]>
To: "Mercedes Discussion List" 
Sent: Wednesday, June 18, 2008 6:35 PM
Subject: Re: [MBZ] Air guns


> Hmmm,. you might be better classified as a "geezer" in that situation?
> Or maybe those are interchangeable designations (or the key factor might
> be whether you have shorts and black knee socks on with sandals).
>
> --R
>
> Wilton Strickland wrote:
> > Yeah, I've wondered what a passerby thinks when he sees what he may
think is
> > a "codger" pushing a walker across the yard and carrying a rifle.
> >
> > Wilton, no codger
> >
> >
> >
>
> ___
> http://www.okiebenz.com
> For new parts see official list sponsor: http://www.buymbparts.com/
> For used parts email [EMAIL PROTECTED]
>
> To Unsubscribe or change delivery options go to:
> http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>


___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] Air guns

2008-06-18 Thread Wilton Strickland
'Not a "geezer" yet, either.  No, I don't wear shorts, black knee socks and
sandals, though those who do are very welcome and free to do so if they
want.  My "uniform" of the day is almost always full length khaki pants,
light blue short sleeve shirt, black or brown socks and black or brown SAS
shoes, all of proper size and well-laundered, pressed/ironed to complement
the well-groomed "gentleman" within.

Wilton

- Original Message -
From: "Rich Thomas" <[EMAIL PROTECTED]>
To: "Mercedes Discussion List" 
Sent: Wednesday, June 18, 2008 6:35 PM
Subject: Re: [MBZ] Air guns


> Hmmm,. you might be better classified as a "geezer" in that situation?
> Or maybe those are interchangeable designations (or the key factor might
> be whether you have shorts and black knee socks on with sandals).
>
> --R
>
> Wilton Strickland wrote:
> > Yeah, I've wondered what a passerby thinks when he sees what he may
think is
> > a "codger" pushing a walker across the yard and carrying a rifle.
> >
> > Wilton, no codger
> >
> >
> >
>
> ___
> http://www.okiebenz.com
> For new parts see official list sponsor: http://www.buymbparts.com/
> For used parts email [EMAIL PROTECTED]
>
> To Unsubscribe or change delivery options go to:
> http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>


___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


[MBZ] Air guns

2008-06-18 Thread Wilton Strickland
Nothing's wrong with being a codger; I'm just not quite ready to be one.

Wilton

___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] '86 SDL no a/c

2008-06-18 Thread Peter Frederick
The pusbutton unit provides the ground for the signal -- it must have  
12V on it with the ignition on.  If not, you have a wiring problem,  
usually a broken wire at the socket.

That's why I suggested testing voltage to ground at the pressure cut- 
out switch.

To jump a few posts, check the wires on the temperature sensor (may  
be in the upper radiator hose fitting OR lower down mid-block, it was  
moved at some point).  The wires break, and the PBCU will "think" the  
coolant is about -50F with infinite resistance!  One wire was busted  
on mine.

Also check the resistance of the temperature sensors for the cabin,  
evaporator, and heat exchanger.  An open sensor at any one of them  
will likely keep the compressor off, as no cooling is required OR the  
evaporator is too cold.

Peter


___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] Useless KFC coupon

2008-06-18 Thread RELNGSON
> ...I won't be using that coupon but thought someone else might want to...
> 
Honored in Southern California excluding San Diego and Palm Springs.

RLE
> 
> 




**
Gas prices getting you down? Search AOL Autos for 
fuel-efficient used cars.
  (http://autos.aol.com/used?ncid=aolaut000507)
___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] '86 SDL no a/c

2008-06-18 Thread Bill R
Luther - Like Kaleb said, I would be certain that you have a source of
medical insurance and retirement.  You are into fairly high risk activity,
so even a disability policy would be a good idea.  Get back to me if you
think you are going to need it.  I fought with my disability company for
three years prior to a settlement.  There are some things you will need to
know.  SSD is pretty poor also.  Had I not had a private pension [very safe
- all funds already in the bank for my full lifetime pension] I would be in
bad shape now.  I didn't worry too much about healthcare when I was younger,
now we would be spending about $1,200 - $2,000/month for MD's, cardiac
procedures and Rx if I didn't have very good insurance.  We will have out of
pocket of about $1,500 this year instead.  If you can make huge $$$ doing
home repair and can put enough away for retirement and will not ever get
sick or injured, then insurance won't matter too much.  Seems to me you said
you were single.  You could always do what I did and marry someone who has
great family insurance through her work.
BillR  

-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Kaleb C. Striplin
Sent: Wednesday, June 18, 2008 6:32 PM
To: Mercedes Discussion List
Subject: Re: [MBZ] '86 SDL no a/c

Im assuming you have health insurance etc with your real job.  My 
advice, dont give that up.  I have been self employed for many years, 
having that insurance is very nice, along with the 401k etc.

Luther wrote:
> I don't mind, I'm hoping to not be employed there within the next 6
months.  I'm working on getting my home repair business to the
self-sustaining point.
> 
> Luther
> 
> On Wed, 18 Jun 2008 10:39:43 -0500, Bill R <[EMAIL PROTECTED]> wrote:
> 
>> I don't mind.  Guess that is not the #1 consideration at the moment
though.
>> BillR
>>
>> -Original Message-
>> From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]
>> On Behalf Of Luther
>> Sent: Wednesday, June 18, 2008 11:24 AM
>> To: Mercedes Discussion List
>> Subject: Re: [MBZ] '86 SDL no a/c
>>
>> Hrm, maybe if I quit my night job :D
>>
>> Luther
>>
>> On Wed, 18 Jun 2008 10:04:08 -0500, Bill R <[EMAIL PROTECTED]>
wrote:
>>
>>> When you are practiced up would you be interested in doing another?
Mine
>> is
>>> back to working correctly after a month of problems, but if it lasts the
>>> summer I think I had better have it done next winter.
>>> BillR
>>>
>>>
>>
>>
> 
> 
> 

-- 
Kaleb C. Striplin/Claremore, OK
  94 E420, 92 300SD, 92 300E 4Matic, 91 300D, 89 560SEL,
  89 260E, 87 300SDL, 86 560SL, 85 380SE 5.0 Euro,
  84 190D, 84 300D euro manny, 81 240D, 80 240D, 76 240D,
  76 300D, 72 250C, 69 250, 66 220SEb
http://www.okiebenz.com

___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] What would you do if diesel/gas cost $10/g

2008-06-18 Thread Curt Raymond
CB caps are even quieter as they're subsonic. Shorts are not always subsonic.
Dad buys "Super Calibri" brand (made in Spain) CB caps which I dispatched many 
a squirrel with. Quieter than slapping the gun when you fire...

-Curt

Date: Wed, 18 Jun 2008 15:57:09 -0500
From: "R A Bennell" <[EMAIL PROTECTED]>
Subject: Re: [MBZ] What would you do if diesel/gas cost $10/g
To: "Mercedes Discussion List" 
Message-ID: <[EMAIL PROTECTED]>
Content-Type: text/plain;    charset="iso-8859-1"

Single shot .22 rifle shooting shorts does not make much noise either. My 
younger son picks off squirrels out at
the lake because my mother does not want them in the attic etc. It is too close 
in to town and we are not legally
permitted to discharge firearms so we keep it pretty quiet.

Randy


  
___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] Air guns

2008-06-18 Thread Curt Raymond
Dad and I were at the range one time and a couple old fellers were there with 
their .45s.
One of the guys had Parkinsons so bad he had to put the pistol and the magazine 
on the table and slowly slide them together...
We all backed away when he brought that pistol up to shoot but it was amazing, 
as he brought the gun up all sign of the tremor ceased and he was just as 
steady as a rock. He then proceeded to shoot different handloads through a 
chronograph. This was a window chrono so he had to keep all his shots to about 
a 4" window or he'd have blown his chrono apart.
When he first went for a mag change I offered to help which he greatly 
appreciated. I spent most of a day with him, changing mags and refilling them. 
He shot about 300 rounds all of which would have taken up no more space than 
the bottom of a soda can...

-Curt

Date: Wed, 18 Jun 2008 15:20:20 -0400
From: "Wilton Strickland" <[EMAIL PROTECTED]>
Subject: [MBZ] Air guns
To: "mercedes" 
Message-ID: <[EMAIL PROTECTED]>
Content-Type: text/plain;    charset="Windows-1252"

I have a Crossman pump pellet gun I use occasionally on pigeons way up on
top of my Georgian Revival slate roof (nearly 3 floors up) - usually hit 'em
fairly easily so far.  'Haven't done it in little over a year.  When my
tremor was really bad, wife would see me coming back in the house after
dispatching coupla pigeons and ask, "How can you hit anything with your
hands shaking so?"  Answer:  "'Don't shake resting against a tree or fence
post."

Wilton




  
___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] 67 250s

2008-06-18 Thread Curt Raymond
C'mon thats got "WARNING" painted all over it in bright red letters.
Why does the wood look so fake? Why are NONE of the radio components still in 
it? Whats up with the rear deck?
Why is the grill badge on sideways? Oh the horrible little air cleaners!
Obviously replacement mats...
Flood car maybe?


-Curt

Date: Wed, 18 Jun 2008 10:07:36 -0700
From: Redghost <[EMAIL PROTECTED]>
Subject: [MBZ] 67 250s
To: Mercedes Discussion List 
Message-ID: <[EMAIL PROTECTED]>
Content-Type: text/plain; charset=US-ASCII; format=flowed

http://seattle.craigslist.org/see/car/723170406.html

Would love to have this, but SWMBA wants newer




--
Clay
Seattle Bioburner

1972 220D - Gump
1995 E300D - Cleo
1987 300SDL - POS - DOA
The FSM would drive a Diesel Benz


  
___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] Air guns

2008-06-18 Thread Rich Thomas
Hmmm,. you might be better classified as a "geezer" in that situation?  
Or maybe those are interchangeable designations (or the key factor might 
be whether you have shorts and black knee socks on with sandals).

--R

Wilton Strickland wrote:
> Yeah, I've wondered what a passerby thinks when he sees what he may think is
> a "codger" pushing a walker across the yard and carrying a rifle.
>
> Wilton, no codger
>
>   
>

___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] incredible service from Rusty

2008-06-18 Thread Kaleb C. Striplin
hahahahahahahahaha

Luther wrote:
> I'd only believe Hursty as far as I can throw him.
> 
> Luther
> 
> On Wed, 18 Jun 2008 13:15:30 -0500, <[EMAIL PROTECTED]> wrote:
> 
>> When my quote comes in, all others are not important.  The world revolves
>> around me, or so Hursty says.
>>
>>> Actually Kaleb, the quote was 1 day ago at the time of your post. It was
>>> at
>>> 1:21pm on the 17th. I currently have 165 quotes ahead of yours and I do
>>> them
>>> in the order they come in. I believe I told you yesterday that we were
>>> unusually busy and you replied "that is a good thing". You should have an
>>> answer today. I am very sorry this has upset you so.
>>>
>>> Rusty Cullens
>>> BuyMBparts, Inc.
>>> Tel 1-800-741-5252
>>> Fax   770-454-9745
>>>
> 
> 
> 

-- 
Kaleb C. Striplin/Claremore, OK
  94 E420, 92 300SD, 92 300E 4Matic, 91 300D, 89 560SEL,
  89 260E, 87 300SDL, 86 560SL, 85 380SE 5.0 Euro,
  84 190D, 84 300D euro manny, 81 240D, 80 240D, 76 240D,
  76 300D, 72 250C, 69 250, 66 220SEb
http://www.okiebenz.com

___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] '86 SDL no a/c

2008-06-18 Thread Kaleb C. Striplin
Im assuming you have health insurance etc with your real job.  My 
advice, dont give that up.  I have been self employed for many years, 
having that insurance is very nice, along with the 401k etc.

Luther wrote:
> I don't mind, I'm hoping to not be employed there within the next 6 months.  
> I'm working on getting my home repair business to the self-sustaining point.
> 
> Luther
> 
> On Wed, 18 Jun 2008 10:39:43 -0500, Bill R <[EMAIL PROTECTED]> wrote:
> 
>> I don't mind.  Guess that is not the #1 consideration at the moment though.
>> BillR
>>
>> -Original Message-
>> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
>> On Behalf Of Luther
>> Sent: Wednesday, June 18, 2008 11:24 AM
>> To: Mercedes Discussion List
>> Subject: Re: [MBZ] '86 SDL no a/c
>>
>> Hrm, maybe if I quit my night job :D
>>
>> Luther
>>
>> On Wed, 18 Jun 2008 10:04:08 -0500, Bill R <[EMAIL PROTECTED]> wrote:
>>
>>> When you are practiced up would you be interested in doing another?  Mine
>> is
>>> back to working correctly after a month of problems, but if it lasts the
>>> summer I think I had better have it done next winter.
>>> BillR
>>>
>>>
>>
>>
> 
> 
> 

-- 
Kaleb C. Striplin/Claremore, OK
  94 E420, 92 300SD, 92 300E 4Matic, 91 300D, 89 560SEL,
  89 260E, 87 300SDL, 86 560SL, 85 380SE 5.0 Euro,
  84 190D, 84 300D euro manny, 81 240D, 80 240D, 76 240D,
  76 300D, 72 250C, 69 250, 66 220SEb
http://www.okiebenz.com

___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] incredible service from Rusty

2008-06-18 Thread Kaleb C. Striplin
Im too busy for that.

OK Don wrote:
> You must not have called ---
> 
> On Tue, Jun 17, 2008 at 7:09 PM, Kaleb C. Striplin <[EMAIL PROTECTED]> wrote:
>> several days ago I asked for prices on a list of parts, still have not
>> got that info.
>>
> 
> 

-- 
Kaleb C. Striplin/Claremore, OK
  94 E420, 92 300SD, 92 300E 4Matic, 91 300D, 89 560SEL,
  89 260E, 87 300SDL, 86 560SL, 85 380SE 5.0 Euro,
  84 190D, 84 300D euro manny, 81 240D, 80 240D, 76 240D,
  76 300D, 72 250C, 69 250, 66 220SEb
http://www.okiebenz.com

___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] What would you do if diesel/gas cost $10/g

2008-06-18 Thread Curt Raymond
Yeah when I picked up my Hyundai in Long Beach on Monday it was $7.90 if I 
don't fill it myself. The stations around the airport were like $4.30 IIRC.

-Curt

Date: Tue, 17 Jun 2008 15:00:49 -0700
From: Chuck Landenberger <[EMAIL PROTECTED]>
Subject: Re: [MBZ] What would you do if diesel/gas cost $10/g
To: Mercedes Discussion List 
Message-ID: <[EMAIL PROTECTED]>
Content-Type: text/plain; charset=US-ASCII; delsp=yes; format=flowed

To those who might be renting a car!

Some rental car companies are now charging $8.00 a gallon if you  
don't top up the tank before returning the car.

Be warned!  Do not turn a rental car in without topping up or having  
a front end deal with a defined price per gallon!

Take care,

Chuck
Phoenix


  
___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] Air guns

2008-06-18 Thread R A Bennell
Hey, what's wrong with being a codger? 

Randy

-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Wilton Strickland
Sent: Wednesday, June 18, 2008 2:55 PM
To: Mercedes Discussion List
Subject: Re: [MBZ] Air guns


Yeah, I've wondered what a passerby thinks when he sees what he may think is
a "codger" pushing a walker across the yard and carrying a rifle.

Wilton, no codger

- Original Message -
From: "Bill R" <[EMAIL PROTECTED]>
To: "'Mercedes Discussion List'" 
Sent: Wednesday, June 18, 2008 4:47 PM
Subject: Re: [MBZ] Air guns


> Good aim; working car; lots of friends with squirrel and rabbit
problems...
> I can see it now:  Wilton:  the modern version of "Have Gun - Will Travel"
> BillR
>
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
> On Behalf Of Wilton Strickland
> Sent: Wednesday, June 18, 2008 3:20 PM
> To: mercedes
> Subject: [MBZ] Air guns
>
> I have a Crossman pump pellet gun I use occasionally on pigeons way up on
> top of my Georgian Revival slate roof (nearly 3 floors up) - usually hit
'em
> fairly easily so far.  'Haven't done it in little over a year.  When my
> tremor was really bad, wife would see me coming back in the house after
> dispatching coupla pigeons and ask, "How can you hit anything with your
> hands shaking so?"  Answer:  "'Don't shake resting against a tree or fence
> post."
>
> Wilton
>
>
> ___
> http://www.okiebenz.com
> For new parts see official list sponsor: http://www.buymbparts.com/
> For used parts email [EMAIL PROTECTED]
>
> To Unsubscribe or change delivery options go to:
> http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>
>
> ___
> http://www.okiebenz.com
> For new parts see official list sponsor: http://www.buymbparts.com/
> For used parts email [EMAIL PROTECTED]
>
> To Unsubscribe or change delivery options go to:
> http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] Air guns

2008-06-18 Thread Wilton Strickland
Yeah, I've wondered what a passerby thinks when he sees what he may think is
a "codger" pushing a walker across the yard and carrying a rifle.

Wilton, no codger

- Original Message -
From: "Bill R" <[EMAIL PROTECTED]>
To: "'Mercedes Discussion List'" 
Sent: Wednesday, June 18, 2008 4:47 PM
Subject: Re: [MBZ] Air guns


> Good aim; working car; lots of friends with squirrel and rabbit
problems...
> I can see it now:  Wilton:  the modern version of "Have Gun - Will Travel"
> BillR
>
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
> On Behalf Of Wilton Strickland
> Sent: Wednesday, June 18, 2008 3:20 PM
> To: mercedes
> Subject: [MBZ] Air guns
>
> I have a Crossman pump pellet gun I use occasionally on pigeons way up on
> top of my Georgian Revival slate roof (nearly 3 floors up) - usually hit
'em
> fairly easily so far.  'Haven't done it in little over a year.  When my
> tremor was really bad, wife would see me coming back in the house after
> dispatching coupla pigeons and ask, "How can you hit anything with your
> hands shaking so?"  Answer:  "'Don't shake resting against a tree or fence
> post."
>
> Wilton
>
>
> ___
> http://www.okiebenz.com
> For new parts see official list sponsor: http://www.buymbparts.com/
> For used parts email [EMAIL PROTECTED]
>
> To Unsubscribe or change delivery options go to:
> http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>
>
> ___
> http://www.okiebenz.com
> For new parts see official list sponsor: http://www.buymbparts.com/
> For used parts email [EMAIL PROTECTED]
>
> To Unsubscribe or change delivery options go to:
> http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] What would you do if diesel/gas cost $10/g

2008-06-18 Thread R A Bennell
Single shot .22 rifle shooting shorts does not make much noise either. My 
younger son picks off squirrels out at
the lake because my mother does not want them in the attic etc. It is too close 
in to town and we are not legally
permitted to discharge firearms so we keep it pretty quiet.

Randy

-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of OK Don
Sent: Wednesday, June 18, 2008 2:44 PM
To: Mercedes Discussion List
Subject: Re: [MBZ] What would you do if diesel/gas cost $10/g


This sounds really interesting - can you send links or more info?  My
current (cheap) air rifle is LOUD.

.
>
> A professionally tuned non-magnum airgun wouldn't be bad, especially if you
> can shoot from indoors. "Thock" = dead rabbit. Just don't wound it and make
> it scream. If you want to mess with high pressure air, some of the silenced
> pre charged pneumatics I've seen at Field Target matches make virtually no 
> noise,
> just a little click or ping from the hammer tapping the poppet valve.
>

--
OK Don, KD5NRO
Norman, OK
"There are three kinds of lies: lies, damn lies, and statistics."
-Benjamin Disraeli and/or Mark Twain
'90 300D (Rattled), '92 300D (Saber), ' '81 240D (Gramps), '97 Ply
Grand Voyager (Vincent van-go)

___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] Air guns

2008-06-18 Thread Bill R
Good aim; working car; lots of friends with squirrel and rabbit problems...
I can see it now:  Wilton:  the modern version of "Have Gun - Will Travel"
BillR

-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Wilton Strickland
Sent: Wednesday, June 18, 2008 3:20 PM
To: mercedes
Subject: [MBZ] Air guns

I have a Crossman pump pellet gun I use occasionally on pigeons way up on
top of my Georgian Revival slate roof (nearly 3 floors up) - usually hit 'em
fairly easily so far.  'Haven't done it in little over a year.  When my
tremor was really bad, wife would see me coming back in the house after
dispatching coupla pigeons and ask, "How can you hit anything with your
hands shaking so?"  Answer:  "'Don't shake resting against a tree or fence
post."

Wilton


___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] free KFC sandwich

2008-06-18 Thread OK Don
And second prize is TWO coupons!

On Wed, Jun 18, 2008 at 11:41 AM, Wonko the Sane <[EMAIL PROTECTED]> wrote:
> http://www.kfc-la.com/print-coupon-value-menu.html
>
> --


-- 
OK Don, KD5NRO
Norman, OK
"There are three kinds of lies: lies, damn lies, and statistics."
-Benjamin Disraeli and/or Mark Twain
'90 300D (Rattled), '92 300D (Saber), ' '81 240D (Gramps), '97 Ply
Grand Voyager (Vincent van-go)

___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] What would you do if diesel/gas cost $10/g

2008-06-18 Thread OK Don
This sounds really interesting - can you send links or more info?  My
current (cheap) air rifle is LOUD.

.
>
> A professionally tuned non-magnum airgun wouldn't be bad, especially if you
> can shoot from indoors. "Thock" = dead rabbit. Just don't wound it and make
> it scream. If you want to mess with high pressure air, some of the silenced
> pre charged pneumatics I've seen at Field Target matches make virtually no 
> noise,
> just a little click or ping from the hammer tapping the poppet valve.
>

-- 
OK Don, KD5NRO
Norman, OK
"There are three kinds of lies: lies, damn lies, and statistics."
-Benjamin Disraeli and/or Mark Twain
'90 300D (Rattled), '92 300D (Saber), ' '81 240D (Gramps), '97 Ply
Grand Voyager (Vincent van-go)

___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] '86 SDL no a/c

2008-06-18 Thread OK Don
I believe that the coolant sensor for the ACC is in a dual element
sensor on the engine - one set of pins for the ACC, the other for the
idle control.  The AC on my SDL would turn off the compressor as soon
as the coolant hit 80C - the PO had reversed the sets of wires on that
sensor. The AC worked great after I switched those two  plugs.

On Wed, Jun 18, 2008 at 1:24 PM, Luther <[EMAIL PROTECTED]> wrote:
> OK, test results are all normal except for the following:
> Sensor Ground test, Pin 8 (coolant temp)=open
> Vacuum flaps, pin 8 (short DEF Flap)=1k ohms
>
> Maybe I have a bad (hopefully unplugged) coolant sensor.

-- 
OK Don, KD5NRO
Norman, OK
"There are three kinds of lies: lies, damn lies, and statistics."
-Benjamin Disraeli and/or Mark Twain
'90 300D (Rattled), '92 300D (Saber), ' '81 240D (Gramps), '97 Ply
Grand Voyager (Vincent van-go)

___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] Air guns

2008-06-18 Thread Wilton Strickland
.177 cal.

Wilton

- Original Message -
From: "Rolf" <[EMAIL PROTECTED]>
To: "Mercedes Discussion List" 
Sent: Wednesday, June 18, 2008 3:33 PM
Subject: Re: [MBZ] Air guns


> .22 or .175(7?)? My dad used to have a wicked pump 22 pellet gun
> accurate and one pump was great for scaring squirrels out of the feeder,
> 3 pumps and they were dead.
>
> -Rolf
>
> Wilton Strickland wrote:
> > I have a Crossman pump pellet gun I use occasionally on pigeons way up
on
> > top of my Georgian Revival slate roof (nearly 3 floors up) - usually hit
'em
> > fairly easily so far.  'Haven't done it in little over a year.  When my
> > tremor was really bad, wife would see me coming back in the house after
> > dispatching coupla pigeons and ask, "How can you hit anything with your
> > hands shaking so?"  Answer:  "'Don't shake resting against a tree or
fence
> > post."
> >
> > Wilton
> >
> >
> > ___
> > http://www.okiebenz.com
> > For new parts see official list sponsor: http://www.buymbparts.com/
> > For used parts email [EMAIL PROTECTED]
> >
> > To Unsubscribe or change delivery options go to:
> > http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> >
>
>
> ___
> http://www.okiebenz.com
> For new parts see official list sponsor: http://www.buymbparts.com/
> For used parts email [EMAIL PROTECTED]
>
> To Unsubscribe or change delivery options go to:
> http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] free KFC sandwich

2008-06-18 Thread Rich Thomas
Salt sugar fat cholesterol, four of the six basic food groups.

--R

SteveB wrote:
> 2 hitches, you have to eat their sandwich.
>
> Steve
>
> On Wed, Jun 18, 2008 at 1:21 PM, andrew strasfogel <[EMAIL PROTECTED]>
> wrote:
>
>   
>> But there's a hitch: you have to purchase a 32 oz. drink.  I religiously
>> avoid all products (esp. carbonated sodas) with HF corn syrup.
>>
>> On Wed, Jun 18, 2008 at 12:45 PM, Luther <[EMAIL PROTECTED]> wrote:
>>
>> 
>>> , lunch!
>>>
>>>
>>> On Wed, 18 Jun 2008 11:41:32 -0500, Wonko the Sane <[EMAIL PROTECTED]>
>>> wrote:
>>>
>>>   
 http://www.kfc-la.com/print-coupon-value-menu.html

 
>>>
>>> --
>>> Luther   KB5QHUAlma, Ark
>>> '87 300SDL (272,xxx mi) head case
>>> '85 Ford F250 6.9 diesel (x58,xxx mi)
>>> '82 300CD (166 kmi)
>>> '82 300D  (74 kmi) getting donor engine-sold
>>> '85 300D (280,176) parts car sans engine
>>>
>>> ___
>>> http://www.okiebenz.com
>>> For new parts see official list sponsor: http://www.buymbparts.com/
>>> For used parts email [EMAIL PROTECTED]
>>>
>>> To Unsubscribe or change delivery options go to:
>>> http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>>>
>>>   
>> ___
>> http://www.okiebenz.com
>> For new parts see official list sponsor: http://www.buymbparts.com/
>> For used parts email [EMAIL PROTECTED]
>>
>> To Unsubscribe or change delivery options go to:
>> http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>>
>> 
> ___
> http://www.okiebenz.com
> For new parts see official list sponsor: http://www.buymbparts.com/
> For used parts email [EMAIL PROTECTED]
>
> To Unsubscribe or change delivery options go to:
> http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>
>
>   
___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] Air guns

2008-06-18 Thread Rolf
.22 or .175(7?)? My dad used to have a wicked pump 22 pellet gun
accurate and one pump was great for scaring squirrels out of the feeder,
3 pumps and they were dead.

-Rolf

Wilton Strickland wrote:
> I have a Crossman pump pellet gun I use occasionally on pigeons way up on
> top of my Georgian Revival slate roof (nearly 3 floors up) - usually hit 'em
> fairly easily so far.  'Haven't done it in little over a year.  When my
> tremor was really bad, wife would see me coming back in the house after
> dispatching coupla pigeons and ask, "How can you hit anything with your
> hands shaking so?"  Answer:  "'Don't shake resting against a tree or fence
> post."
>
> Wilton
>
>
> ___
> http://www.okiebenz.com
> For new parts see official list sponsor: http://www.buymbparts.com/
> For used parts email [EMAIL PROTECTED]
>
> To Unsubscribe or change delivery options go to:
> http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>   


___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] free KFC sandwich

2008-06-18 Thread Wonko the Sane
No I don't (have to eat their sandwich). Many months since I've eaten
chicken.

I won't be using that coupon but thought someone else might want to.

On Wed, Jun 18, 2008 at 1:43 PM, SteveB <[EMAIL PROTECTED]> wrote:

> 2 hitches, you have to eat their sandwich.
>
> Steve
>
>


-- 
LT Don
http://don.homelinux.net/~don/

apt-get update
apt-get upgrade
The following packages will be replaced
Prez
Do you want to continue? [Y/n] Y
___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] 124 evapectomy

2008-06-18 Thread dave walton
All 3. XH-7 and XH-9 are used by most R134a systems. XH-5 is used for
R12.  It's relatively cheap stuff. Also safer than having exothermic
reactions in potentially flammable environments. R134a is flammable
under the right conditions - when under pressure in the presence of
oxygen.

-Dave Walton

On Wed, Jun 18, 2008 at 3:18 PM, John Robbins <[EMAIL PROTECTED]> wrote:
> dave walton wrote:
>> Absorbent desiccants cannot be reused. Adsorbent ones can. Most use
>> XH-5, XH-7 or XH-9, all of which can be at least partially restored by
>> pulling a vacuum on the system. They are made from sodium and/or
>> potassium aluminosilicate which physically traps water molecules
>> rather than chemically combining with them.
>
> Any idea which ones are used in auto refrigerant systems?
>
> John
>
>
> ___
> http://www.okiebenz.com
> For new parts see official list sponsor: http://www.buymbparts.com/
> For used parts email [EMAIL PROTECTED]
>
> To Unsubscribe or change delivery options go to:
> http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>

___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] 124 evapectomy

2008-06-18 Thread Wilton Strickland
My new dryer from Rusty is a Behr/Hella made guess where - China.

Wilton

- Original Message - 
From: "John Robbins" <[EMAIL PROTECTED]>
To: "Mercedes Discussion List" 
Sent: Wednesday, June 18, 2008 3:18 PM
Subject: Re: [MBZ] 124 evapectomy


> dave walton wrote:
> > Absorbent desiccants cannot be reused. Adsorbent ones can. Most use
> > XH-5, XH-7 or XH-9, all of which can be at least partially restored by
> > pulling a vacuum on the system. They are made from sodium and/or
> > potassium aluminosilicate which physically traps water molecules
> > rather than chemically combining with them.
> 
> Any idea which ones are used in auto refrigerant systems?
> 
> John
> 
> 
> ___
> http://www.okiebenz.com
> For new parts see official list sponsor: http://www.buymbparts.com/
> For used parts email [EMAIL PROTECTED]
> 
> To Unsubscribe or change delivery options go to:
> http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 

___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] Was gas cost $10/g- Now Air guns

2008-06-18 Thread Bill R
I have had a bit of luck with the electronic varmint annoyers, and a bit of
luck with mothballs.  Other than that the only success I ever had was with a
.22 when I was young.  Don't recommend that as it seems you are not out in
the wide open spaces.  Others have reported luck with a cat, or even putting
cat fur around where they hang out.  Seems they do not like the smell.
BillR

-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Redghost
Sent: Wednesday, June 18, 2008 2:42 PM
To: Mercedes Discussion List
Subject: Re: [MBZ] Was gas cost $10/g- Now Air guns

I used to have a crossman 1377 long ago.  Squirrels are driving me  
nuts so went to find another. Not available locally, order out. Screw  
that, so I got the plastic 760 pump.  Been unable to verify a kill  
yet.  Damn critters just get concussed or fall.  Then they crawl away  
before I can kill them.

Short distance shots, since the neighbor is less than five feet from  
property line and I do not want to hit his home or take out his kids.

clay

On 18 Jun 2008, at 02:30, Mitch Haley wrote:

> MG wrote:
>>  As for getting the rabbits, the only really quiet way in a  
>> neighborhood is
>> to use live traps and then tell people that you are releasing them in
>> the country.
>
> A professionally tuned non-magnum airgun wouldn't be bad,  
> especially if you
> can shoot from indoors. "Thock" = dead rabbit. Just don't wound it  
> and make
> it scream. If you want to mess with high pressure air, some of the  
> silenced
> pre charged pneumatics I've seen at Field Target matches make  
> virtually no noise,
> just a little click or ping from the hammer tapping the poppet valve.
>
> ___
> http://www.okiebenz.com
> For new parts see official list sponsor: http://www.buymbparts.com/
> For used parts email [EMAIL PROTECTED]
>
> To Unsubscribe or change delivery options go to:
> http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


[MBZ] Air guns

2008-06-18 Thread Wilton Strickland
I have a Crossman pump pellet gun I use occasionally on pigeons way up on
top of my Georgian Revival slate roof (nearly 3 floors up) - usually hit 'em
fairly easily so far.  'Haven't done it in little over a year.  When my
tremor was really bad, wife would see me coming back in the house after
dispatching coupla pigeons and ask, "How can you hit anything with your
hands shaking so?"  Answer:  "'Don't shake resting against a tree or fence
post."

Wilton


___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] What would you do if diesel/gas cost $10/g

2008-06-18 Thread Bill R
Like I said, I'll have to be hungrier than I am now for that to happen.
I've done some hunting and a fair amount of fishing, but never been
responsible for dressing what was killed except for fish when I was a kid.
We always ate what was killed or caught, though.  I used to fish off the
keys with my FIL.  Best fisherman I ever saw, and was the man came up with
the idea for the fighting chair and some other stuff.  He was the exclusive
furniture supplier for Chris-Craft for many years. He had the fish cleaning
job down to a science, and any attempt to help was just a bother.  Fun to
watch him, though.  I think mom still has one or two "Pompanette" fillet
knives somewhere.
BillR

-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of LarryT
Sent: Wednesday, June 18, 2008 2:16 PM
To: Mercedes Discussion List
Subject: Re: [MBZ] What would you do if diesel/gas cost $10/g

If you have the time & inclination, there are some amazing pellet guns 
on the market now which will put bunny stew on the menu every day.   I saw a

commecial where raccoons, possums. and other fairly large animals were 
knocked out of trees with the 1st shot.

Course, you'll need to clean them - or talk someone into doing it for 
you -

Larry T (66 MGB, 74 911, 91 300D)
www.youroil.net for Oil Analysis and Weber Parts
Test Results http://members.rennlist.com/oil
PORSCHE POSTERS!  youroil.net
800-583-8601
Weber Carb Info http://members.rennlist.com/webercarbs



- Original Message - 
From: "Bill R" <[EMAIL PROTECTED]>
To: "'Mercedes Discussion List'" 
Sent: Wednesday, June 18, 2008 10:24 AM
Subject: Re: [MBZ] What would you do if diesel/gas cost $10/g


> Or stay home more to have time to trap rabbits and those bushy tailed 
> attic
> destroying rodents with the good PR firm.
> BillR
>
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
> On Behalf Of E M
> Sent: Wednesday, June 18, 2008 9:55 AM
> To: Mercedes Discussion List
> Subject: Re: [MBZ] What would you do if diesel/gas cost $10/g
>
> Wouldn't it be a lot easier to just pay the $10 per/g for the diesel?
>
>
>
> ___
> http://www.okiebenz.com
> For new parts see official list sponsor: http://www.buymbparts.com/
> For used parts email [EMAIL PROTECTED]
>
> To Unsubscribe or change delivery options go to:
> http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com 


___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] 124 evapectomy

2008-06-18 Thread John Robbins
dave walton wrote:
> Absorbent desiccants cannot be reused. Adsorbent ones can. Most use
> XH-5, XH-7 or XH-9, all of which can be at least partially restored by
> pulling a vacuum on the system. They are made from sodium and/or
> potassium aluminosilicate which physically traps water molecules
> rather than chemically combining with them.

Any idea which ones are used in auto refrigerant systems?

John


___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] 124 evapectomy

2008-06-18 Thread dave walton
Absorbent desiccants cannot be reused. Adsorbent ones can. Most use
XH-5, XH-7 or XH-9, all of which can be at least partially restored by
pulling a vacuum on the system. They are made from sodium and/or
potassium aluminosilicate which physically traps water molecules
rather than chemically combining with them.

-Dave Walton

On Wed, Jun 18, 2008 at 2:55 PM, LWB250 <[EMAIL PROTECTED]> wrote:
> If you open a receiver/dryer without installing it in
> a closed system within 4 hours (dependent on ambient
> temperature and humidity) the dessicant properties of
> the receiver/dryer will be exhausted.
>
> Or so an automotive AC guy once told me.  Makes sense
> to me.
>
> Dan
>
>
>
> --- Wilton Strickland <[EMAIL PROTECTED]> wrote:
>
>> 'Just drove the car ~12 miles; sure is good to be
>> able to drive it after 2
>> weeks or so without it - everything seems to be
>> doing very well - 'course, I
>> haven't run the A/C yet.
>>
>> 'Just realized:  maybe I should add a bit of coolant
>> to replace the half cup
>> or so I lost during the evapectomy.
>> 'Noticed on this morning's little trip, though, temp
>> didn't get over 85C, so
>> no need to get in a panic over it.
>>
>> 'Thinking about whether or not I should R&R Freon
>> manifold and dryer myself
>> or take it to the refrigeration guy.  Any tips?
>>
>> Wilton
>>
>>
>> ___
>> http://www.okiebenz.com
>> For new parts see official list sponsor:
>> http://www.buymbparts.com/
>> For used parts email [EMAIL PROTECTED]
>>
>> To Unsubscribe or change delivery options go to:
>>
> http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>>
>
>
>
>
>
> ___
> http://www.okiebenz.com
> For new parts see official list sponsor: http://www.buymbparts.com/
> For used parts email [EMAIL PROTECTED]
>
> To Unsubscribe or change delivery options go to:
> http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>

___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] 124 evapectomy

2008-06-18 Thread Wilton Strickland
Dan, that's what I've been thinking/concerned about, too.  Temp and humidity
are way up around here.  'Probably oughta let the refrigeration guy do it;
then he can evacuate it and charge it immediately.

Wilton

- Original Message -
From: "LWB250" <[EMAIL PROTECTED]>
To: "Mercedes Discussion List" 
Sent: Wednesday, June 18, 2008 2:55 PM
Subject: Re: [MBZ] 124 evapectomy


> If you open a receiver/dryer without installing it in
> a closed system within 4 hours (dependent on ambient
> temperature and humidity) the dessicant properties of
> the receiver/dryer will be exhausted.
>
> Or so an automotive AC guy once told me.  Makes sense
> to me.
>
> Dan
>
>
>
> --- Wilton Strickland <[EMAIL PROTECTED]> wrote:
>
> > 'Just drove the car ~12 miles; sure is good to be
> > able to drive it after 2
> > weeks or so without it - everything seems to be
> > doing very well - 'course, I
> > haven't run the A/C yet.
> >
> > 'Just realized:  maybe I should add a bit of coolant
> > to replace the half cup
> > or so I lost during the evapectomy.
> > 'Noticed on this morning's little trip, though, temp
> > didn't get over 85C, so
> > no need to get in a panic over it.
> >
> > 'Thinking about whether or not I should R&R Freon
> > manifold and dryer myself
> > or take it to the refrigeration guy.  Any tips?
> >
> > Wilton
> >
> >
> > ___
> > http://www.okiebenz.com
> > For new parts see official list sponsor:
> > http://www.buymbparts.com/
> > For used parts email [EMAIL PROTECTED]
> >
> > To Unsubscribe or change delivery options go to:
> >
> http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> >
>
>
>
>
>
> ___
> http://www.okiebenz.com
> For new parts see official list sponsor: http://www.buymbparts.com/
> For used parts email [EMAIL PROTECTED]
>
> To Unsubscribe or change delivery options go to:
> http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] 124 evapectomy

2008-06-18 Thread John Robbins
Wilton Strickland wrote:
> 'Just drove the car ~12 miles; sure is good to be able to drive it after 2
> weeks or so without it - everything seems to be doing very well - 'course, I
> haven't run the A/C yet.

Congrats!!!

I think the next step on the difficulty ladder is to rebuild an engine! 
Maybe you should find a good car with a bad engine and fix it up when 
the mood strikes ;)

John


___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


[MBZ] 91 350SDL tac

2008-06-18 Thread Wilton Strickland
You guys were right, of course, on location of the OVP.  'Sitting right up
there just inboard of the brake booster.  'Ordered one from Rusty this
morning.  I may do an autopsy on the old one.  Thanks, again.

Wilton


___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] 124 evapectomy

2008-06-18 Thread LWB250
If you open a receiver/dryer without installing it in
a closed system within 4 hours (dependent on ambient
temperature and humidity) the dessicant properties of
the receiver/dryer will be exhausted.

Or so an automotive AC guy once told me.  Makes sense
to me.

Dan



--- Wilton Strickland <[EMAIL PROTECTED]> wrote:

> 'Just drove the car ~12 miles; sure is good to be
> able to drive it after 2
> weeks or so without it - everything seems to be
> doing very well - 'course, I
> haven't run the A/C yet.
> 
> 'Just realized:  maybe I should add a bit of coolant
> to replace the half cup
> or so I lost during the evapectomy.
> 'Noticed on this morning's little trip, though, temp
> didn't get over 85C, so
> no need to get in a panic over it.
> 
> 'Thinking about whether or not I should R&R Freon
> manifold and dryer myself
> or take it to the refrigeration guy.  Any tips?
> 
> Wilton
> 
> 
> ___
> http://www.okiebenz.com
> For new parts see official list sponsor:
> http://www.buymbparts.com/
> For used parts email [EMAIL PROTECTED]
> 
> To Unsubscribe or change delivery options go to:
>
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 



  

___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


[MBZ] 124 evapectomy

2008-06-18 Thread Wilton Strickland
'Just drove the car ~12 miles; sure is good to be able to drive it after 2
weeks or so without it - everything seems to be doing very well - 'course, I
haven't run the A/C yet.

'Just realized:  maybe I should add a bit of coolant to replace the half cup
or so I lost during the evapectomy.
'Noticed on this morning's little trip, though, temp didn't get over 85C, so
no need to get in a panic over it.

'Thinking about whether or not I should R&R Freon manifold and dryer myself
or take it to the refrigeration guy.  Any tips?

Wilton


___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] Antenna replacement

2008-06-18 Thread Redghost
Much more interested in breast enhancements for the neighbor gal who  
sunbathes

clay

On 18 Jun 2008, at 06:17, Rich Thomas wrote:

> I get lots of emails hawking products that are purported to deal  
> with ED
> problems, maybe you should try some?
>
> --R
>
> Redghost wrote:
>> I got one of the Rusty antennas.  The ED would not behave in that
>> department, and wife wanted tunes.  Once the antenna arrived, ED
>> decided it was better off not having me ripping into it and proceeded
>> to never have issue with antenna again.  I still have brand new
>> antenna just waiting for the original one to play stupid
>>
>> clay
>>
>>
>>
>
> ___
> http://www.okiebenz.com
> For new parts see official list sponsor: http://www.buymbparts.com/
> For used parts email [EMAIL PROTECTED]
>
> To Unsubscribe or change delivery options go to:
> http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] free KFC sandwich

2008-06-18 Thread SteveB
2 hitches, you have to eat their sandwich.

Steve

On Wed, Jun 18, 2008 at 1:21 PM, andrew strasfogel <[EMAIL PROTECTED]>
wrote:

> But there's a hitch: you have to purchase a 32 oz. drink.  I religiously
> avoid all products (esp. carbonated sodas) with HF corn syrup.
>
> On Wed, Jun 18, 2008 at 12:45 PM, Luther <[EMAIL PROTECTED]> wrote:
>
> > , lunch!
> >
> >
> > On Wed, 18 Jun 2008 11:41:32 -0500, Wonko the Sane <[EMAIL PROTECTED]>
> > wrote:
> >
> > > http://www.kfc-la.com/print-coupon-value-menu.html
> > >
> >
> >
> >
> > --
> > Luther   KB5QHUAlma, Ark
> > '87 300SDL (272,xxx mi) head case
> > '85 Ford F250 6.9 diesel (x58,xxx mi)
> > '82 300CD (166 kmi)
> > '82 300D  (74 kmi) getting donor engine-sold
> > '85 300D (280,176) parts car sans engine
> >
> > ___
> > http://www.okiebenz.com
> > For new parts see official list sponsor: http://www.buymbparts.com/
> > For used parts email [EMAIL PROTECTED]
> >
> > To Unsubscribe or change delivery options go to:
> > http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> >
> ___
> http://www.okiebenz.com
> For new parts see official list sponsor: http://www.buymbparts.com/
> For used parts email [EMAIL PROTECTED]
>
> To Unsubscribe or change delivery options go to:
> http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>
___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] Was gas cost $10/g- Now Air guns

2008-06-18 Thread Redghost
I used to have a crossman 1377 long ago.  Squirrels are driving me  
nuts so went to find another. Not available locally, order out. Screw  
that, so I got the plastic 760 pump.  Been unable to verify a kill  
yet.  Damn critters just get concussed or fall.  Then they crawl away  
before I can kill them.

Short distance shots, since the neighbor is less than five feet from  
property line and I do not want to hit his home or take out his kids.

clay

On 18 Jun 2008, at 02:30, Mitch Haley wrote:

> MG wrote:
>>  As for getting the rabbits, the only really quiet way in a  
>> neighborhood is
>> to use live traps and then tell people that you are releasing them in
>> the country.
>
> A professionally tuned non-magnum airgun wouldn't be bad,  
> especially if you
> can shoot from indoors. "Thock" = dead rabbit. Just don't wound it  
> and make
> it scream. If you want to mess with high pressure air, some of the  
> silenced
> pre charged pneumatics I've seen at Field Target matches make  
> virtually no noise,
> just a little click or ping from the hammer tapping the poppet valve.
>
> ___
> http://www.okiebenz.com
> For new parts see official list sponsor: http://www.buymbparts.com/
> For used parts email [EMAIL PROTECTED]
>
> To Unsubscribe or change delivery options go to:
> http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] incredible service from Rusty

2008-06-18 Thread Luther
I'd only believe Hursty as far as I can throw him.

Luther

On Wed, 18 Jun 2008 13:15:30 -0500, <[EMAIL PROTECTED]> wrote:

> When my quote comes in, all others are not important.  The world revolves
> around me, or so Hursty says.
>
>> Actually Kaleb, the quote was 1 day ago at the time of your post. It was
>> at
>> 1:21pm on the 17th. I currently have 165 quotes ahead of yours and I do
>> them
>> in the order they come in. I believe I told you yesterday that we were
>> unusually busy and you replied "that is a good thing". You should have an
>> answer today. I am very sorry this has upset you so.
>>
>> Rusty Cullens
>> BuyMBparts, Inc.
>> Tel 1-800-741-5252
>> Fax   770-454-9745
>>
>



-- 
Luther   KB5QHUAlma, Ark
'87 300SDL (272,xxx mi) head case
'85 Ford F250 6.9 diesel (x58,xxx mi)
'82 300CD (166 kmi)
'82 300D  (74 kmi) getting donor engine-sold
'85 300D (280,176) parts car sans engine

___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] '86 SDL no a/c

2008-06-18 Thread Donald Snook
Luther wrote: "I'm working on getting my home repair business to the 
self-sustaining point."

If you are ever in Wichita, Kansas and want to make a little extra money, I 
need somebody really good to install a dishwasher in my house.  My house was 
built in 1929 and never has had a dishwasher. So, it would require cutting into 
the existing cabinets (next to the sink) and installing the dishwasher.  Bigger 
than I can do, plus, I am not that confident in my ability to do the woodwork 
necessary.


Donald H. Snook

___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] '86 SDL no a/c

2008-06-18 Thread Luther
OK, test results are all normal except for the following:
Sensor Ground test, Pin 8 (coolant temp)=open
Vacuum flaps, pin 8 (short DEF Flap)=1k ohms

Maybe I have a bad (hopefully unplugged) coolant sensor.
What does the vacuum flap reading mean?

Luther

On Wed, 18 Jun 2008 12:41:29 -0500, Luther <[EMAIL PROTECTED]> wrote:

> Hold that thought, I just read your section on checking if everything that 
> tells the ACC what to do is working ok...be back in a while after these tests 
> are done.
>
> Luther,
>
> On Wed, 18 Jun 2008 12:38:39 -0500, Luther <[EMAIL PROTECTED]> wrote:
>
>> No, the Klima was NOT told to turn the a/c on.  Pin 10 at the Klima mount 
>> read open on the Ohm meter.  I pulled the ACC and it's WA different from 
>> the 123s that I'm familiar with.  How do you get these buggers appart and 
>> what are the normal failure modes?  I can see several caps on the bottom 
>> circuit board, so I'm guessing that it's similar to the cruise amp repair?  
>> Or should I "test" this unit before attempting repair?
>>
>> Luther
>>
>> On Wed, 18 Jun 2008 10:04:52 -0500, Jim Cathey <[EMAIL PROTECTED]> wrote:
>>
 Low pressure switch was already bypassed by the po.  So I pulled the
 KLIMA relay and the instant I hit pins 5 & 7 together, I heard the
 clutch kick in.  I'm going to resolder the KILMA now.
>>>
>>> Yes, but this isn't definitive.  Was Klima told to turn on the AC?
>>>
>>
>>
>>
>
>
>



-- 
Luther   KB5QHUAlma, Ark
'87 300SDL (272,xxx mi) head case
'85 Ford F250 6.9 diesel (x58,xxx mi)
'82 300CD (166 kmi)
'82 300D  (74 kmi) getting donor engine-sold
'85 300D (280,176) parts car sans engine

___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] What would you do if diesel/gas cost $10/g

2008-06-18 Thread LarryT
If you have the time & inclination, there are some amazing pellet guns 
on the market now which will put bunny stew on the menu every day.   I saw a 
commecial where raccoons, possums. and other fairly large animals were 
knocked out of trees with the 1st shot.

Course, you'll need to clean them - or talk someone into doing it for 
you -

Larry T (66 MGB, 74 911, 91 300D)
www.youroil.net for Oil Analysis and Weber Parts
Test Results http://members.rennlist.com/oil
PORSCHE POSTERS!  youroil.net
800-583-8601
Weber Carb Info http://members.rennlist.com/webercarbs



- Original Message - 
From: "Bill R" <[EMAIL PROTECTED]>
To: "'Mercedes Discussion List'" 
Sent: Wednesday, June 18, 2008 10:24 AM
Subject: Re: [MBZ] What would you do if diesel/gas cost $10/g


> Or stay home more to have time to trap rabbits and those bushy tailed 
> attic
> destroying rodents with the good PR firm.
> BillR
>
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
> On Behalf Of E M
> Sent: Wednesday, June 18, 2008 9:55 AM
> To: Mercedes Discussion List
> Subject: Re: [MBZ] What would you do if diesel/gas cost $10/g
>
> Wouldn't it be a lot easier to just pay the $10 per/g for the diesel?
>
>
>
> ___
> http://www.okiebenz.com
> For new parts see official list sponsor: http://www.buymbparts.com/
> For used parts email [EMAIL PROTECTED]
>
> To Unsubscribe or change delivery options go to:
> http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com 


___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] incredible service from Rusty

2008-06-18 Thread kaleb
When my quote comes in, all others are not important.  The world revolves
around me, or so Hursty says.

> Actually Kaleb, the quote was 1 day ago at the time of your post. It was
> at
> 1:21pm on the 17th. I currently have 165 quotes ahead of yours and I do
> them
> in the order they come in. I believe I told you yesterday that we were
> unusually busy and you replied "that is a good thing". You should have an
> answer today. I am very sorry this has upset you so.
>
> Rusty Cullens
> BuyMBparts, Inc.
> Tel 1-800-741-5252
> Fax   770-454-9745
>
> - Original Message -
> From: "Kaleb C. Striplin" <[EMAIL PROTECTED]>
> To: "Mercedes Discussion List" 
> Sent: Tuesday, June 17, 2008 8:09 PM
> Subject: Re: [MBZ] incredible service from Rusty
>
>
>> several days ago I asked for prices on a list of parts, still have not
>> got that info.
>>
>> Allan Streib wrote:
>>> Yesterday, I placed an order for a vacuum pump repair kit and gasket
>>> for my 300D, and a gearshift repair kit for my VW Vanagon.  The parts
>>> arrived TODAY via UPS.
>>>
>>> Just amazing.  Thanks.
>>>
>>> Allan
>>
>> --
>> Kaleb C. Striplin/Claremore, OK
>>  94 E420, 92 300SD, 92 300E 4Matic, 91 300D, 89 560SEL,
>>  89 260E, 87 300SDL, 86 560SL, 85 380SE 5.0 Euro,
>>  84 190D, 84 300D euro manny, 81 240D, 80 240D, 76 240D,
>>  76 300D, 72 250C, 69 250, 66 220SEb
>> http://www.okiebenz.com
>>
>> ___
>> http://www.okiebenz.com
>> For new parts see official list sponsor: http://www.buymbparts.com/
>> For used parts email [EMAIL PROTECTED]
>>
>> To Unsubscribe or change delivery options go to:
>> http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>>
>
>
>
>
> ___
> http://www.okiebenz.com
> For new parts see official list sponsor: http://www.buymbparts.com/
> For used parts email [EMAIL PROTECTED]
>
> To Unsubscribe or change delivery options go to:
> http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>



___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


[MBZ] bio diesel processor

2008-06-18 Thread Donald Snook
http://wichita.craigslist.org/bar/669006578.html

I have no idea if this is a good deal or not.  Not mine, no affiliation, etc.

Donald H. Snook

___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] '86 SDL no a/c

2008-06-18 Thread Luther
Hold that thought, I just read your section on checking if everything that 
tells the ACC what to do is working ok...be back in a while after these tests 
are done.

Luther,

On Wed, 18 Jun 2008 12:38:39 -0500, Luther <[EMAIL PROTECTED]> wrote:

> No, the Klima was NOT told to turn the a/c on.  Pin 10 at the Klima mount 
> read open on the Ohm meter.  I pulled the ACC and it's WA different from 
> the 123s that I'm familiar with.  How do you get these buggers appart and 
> what are the normal failure modes?  I can see several caps on the bottom 
> circuit board, so I'm guessing that it's similar to the cruise amp repair?  
> Or should I "test" this unit before attempting repair?
>
> Luther
>
> On Wed, 18 Jun 2008 10:04:52 -0500, Jim Cathey <[EMAIL PROTECTED]> wrote:
>
>>> Low pressure switch was already bypassed by the po.  So I pulled the
>>> KLIMA relay and the instant I hit pins 5 & 7 together, I heard the
>>> clutch kick in.  I'm going to resolder the KILMA now.
>>
>> Yes, but this isn't definitive.  Was Klima told to turn on the AC?
>>
>
>
>



-- 
Luther   KB5QHUAlma, Ark
'87 300SDL (272,xxx mi) head case
'85 Ford F250 6.9 diesel (x58,xxx mi)
'82 300CD (166 kmi)
'82 300D  (74 kmi) getting donor engine-sold
'85 300D (280,176) parts car sans engine

___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] '86 SDL no a/c

2008-06-18 Thread Luther
No, the Klima was NOT told to turn the a/c on.  Pin 10 at the Klima mount read 
open on the Ohm meter.  I pulled the ACC and it's WA different from the 
123s that I'm familiar with.  How do you get these buggers appart and what are 
the normal failure modes?  I can see several caps on the bottom circuit board, 
so I'm guessing that it's similar to the cruise amp repair?  Or should I "test" 
this unit before attempting repair?

Luther

On Wed, 18 Jun 2008 10:04:52 -0500, Jim Cathey <[EMAIL PROTECTED]> wrote:

>> Low pressure switch was already bypassed by the po.  So I pulled the
>> KLIMA relay and the instant I hit pins 5 & 7 together, I heard the
>> clutch kick in.  I'm going to resolder the KILMA now.
>
> Yes, but this isn't definitive.  Was Klima told to turn on the AC?
>



-- 
Luther   KB5QHUAlma, Ark
'87 300SDL (272,xxx mi) head case
'85 Ford F250 6.9 diesel (x58,xxx mi)
'82 300CD (166 kmi)
'82 300D  (74 kmi) getting donor engine-sold
'85 300D (280,176) parts car sans engine

___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] 67 250s

2008-06-18 Thread Mitch Haley
andrew strasfogel wrote:
> 
> She Who Must Be Admired?  Admonished?  Arrested?  Admitted?  Absolved?
> Aggravated?

Either the last one you said, or more commonly, Annoyed.

___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] free KFC sandwich

2008-06-18 Thread Mitch Haley
andrew strasfogel wrote:
> 
> But there's a hitch: you have to purchase a 32 oz. drink.  I religiously
> avoid all products (esp. carbonated sodas) with HF corn syrup.

There's always aspertame, or maybe they will give you a 32oz cup and you
can fill it with chlorinated H2O.

___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] 67 250s

2008-06-18 Thread andrew strasfogel
She Who Must Be Admired?  Admonished?  Arrested?  Admitted?  Absolved?
Aggravated?

On Wed, Jun 18, 2008 at 1:07 PM, Redghost <[EMAIL PROTECTED]> wrote:

> http://seattle.craigslist.org/see/car/723170406.html
>
> Would love to have this, but SWMBA wants newer
>
>
>
>
> --
> Clay
> Seattle Bioburner
>
> 1972 220D - Gump
> 1995 E300D - Cleo
> 1987 300SDL - POS - DOA
> The FSM would drive a Diesel Benz
>
>
> ___
> http://www.okiebenz.com
> For new parts see official list sponsor: http://www.buymbparts.com/
> For used parts email [EMAIL PROTECTED]
>
> To Unsubscribe or change delivery options go to:
> http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>
___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] free KFC sandwich

2008-06-18 Thread andrew strasfogel
But there's a hitch: you have to purchase a 32 oz. drink.  I religiously
avoid all products (esp. carbonated sodas) with HF corn syrup.

On Wed, Jun 18, 2008 at 12:45 PM, Luther <[EMAIL PROTECTED]> wrote:

> , lunch!
>
>
> On Wed, 18 Jun 2008 11:41:32 -0500, Wonko the Sane <[EMAIL PROTECTED]>
> wrote:
>
> > http://www.kfc-la.com/print-coupon-value-menu.html
> >
>
>
>
> --
> Luther   KB5QHUAlma, Ark
> '87 300SDL (272,xxx mi) head case
> '85 Ford F250 6.9 diesel (x58,xxx mi)
> '82 300CD (166 kmi)
> '82 300D  (74 kmi) getting donor engine-sold
> '85 300D (280,176) parts car sans engine
>
> ___
> http://www.okiebenz.com
> For new parts see official list sponsor: http://www.buymbparts.com/
> For used parts email [EMAIL PROTECTED]
>
> To Unsubscribe or change delivery options go to:
> http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>
___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


[MBZ] 67 250s

2008-06-18 Thread Redghost
http://seattle.craigslist.org/see/car/723170406.html

Would love to have this, but SWMBA wants newer




--
Clay
Seattle Bioburner

1972 220D - Gump
1995 E300D - Cleo
1987 300SDL - POS - DOA
The FSM would drive a Diesel Benz


___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] free KFC sandwich

2008-06-18 Thread Luther
, lunch!


On Wed, 18 Jun 2008 11:41:32 -0500, Wonko the Sane <[EMAIL PROTECTED]> wrote:

> http://www.kfc-la.com/print-coupon-value-menu.html
>



-- 
Luther   KB5QHUAlma, Ark
'87 300SDL (272,xxx mi) head case
'85 Ford F250 6.9 diesel (x58,xxx mi)
'82 300CD (166 kmi)
'82 300D  (74 kmi) getting donor engine-sold
'85 300D (280,176) parts car sans engine

___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


[MBZ] free KFC sandwich

2008-06-18 Thread Wonko the Sane
http://www.kfc-la.com/print-coupon-value-menu.html

-- 
LT Don
http://don.homelinux.net/~don/

apt-get update
apt-get upgrade
The following packages will be replaced
Prez
Do you want to continue? [Y/n] Y
___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] '86 SDL no a/c

2008-06-18 Thread dave walton
Only way I know to tell if the pressure switch is working is to
measure its continuity while measuring the pressure. It's standard
procedure to check it after adding refrigerant. All the ones I've seen
are closed (zero ohms) with pressure in the system. If one of the
wires falls of its better to shut off the system rather than risk
running the compressor without oil flowing through the pipes. It's not
something you want to bypass long term. Getting metal fragments out of
the system from a blown compressor is a real PITA - not to mention the
pain of buying a new compressor.

The switch should close at ~ 30 psi, and then open again at ~ 400PSI.
The high pressure open protects against a system freeze up - I've
never tested it. It depends on temperature, but you should see
something like 200-250psi on the high side and 40-50psi on the low
side once the system has been operating for a few minutes - assuming
you use R134a.

Here is a chart if you want to be more precise:
http://www.ackits.com/aacf/ptchart.cfm

As you are adding vapor to the low side, you will see a sweet spot
where the low pressure climbs and the high pressure remains the same.
That usually means I'm close to optimal.

-Dave Walton

On Wed, Jun 18, 2008 at 10:55 AM, Luther <[EMAIL PROTECTED]> wrote:
> Low pressure switch was already bypassed by the po.  So I pulled the KLIMA 
> relay and the instant I hit pins 5 & 7 together, I heard the clutch kick in.  
> I'm going to resolder the KILMA now.
>
> How can I tell if the low pressure switch is good?  The system has full 
> charge from Monday  morning (I hope it hasn't leaked out by now...)
>
> Luther
>
> On Mon, 16 Jun 2008 17:55:31 -0500, Peter Frederick <[EMAIL PROTECTED]> wrote:
>
>> First, check for voltage at the low pressure switch on the reciever/
>> dryer.  This is the one with spade lugs and push-on connectors.   If
>> you have voltage (12V or more) to ground, the pushbutton unit is not
>> switching the compressor on.  Jumper them together with the engine
>> running and the ACC on -- if the compressor runs, either it's already
>> low on charge or the switch is bad.  If there is no voltage and it
>> doesn't run jumpered, time to check ou the KLIMA relay, it's not
>> switching on.
>>
>> You should also watch the compressor when first starting the ACC up
>> -- if the compressor runs a few seconds and kicks out, you are not
>> getting a good speed signal from the compressor to the KLIMA relay,
>> and it will shut of the compressor until you do a power cycle.  This
>> can be quite annoying.
>>
>> Finally, you need to jumper the #5 and #7 (I think, will check
>> tonight) sockets in the KLIMA relay socket with a large wire -- this
>> directly engages the compressor.  If it then runs and cools properly,
>> you have a problem with the KLIMA relay.  There are a series of
>> checks there, but no need to get all exited unless the compressor
>> ground signal is good and you don't have engagement.
>>
>> Also check the fuse -- a bad clutch coil will blow the climate
>> control fuse.
>>
>> Peter
>>
>>
>>
>
>
>
> --
> Luther   KB5QHUAlma, Ark
> '87 300SDL (272,xxx mi) head case
> '85 Ford F250 6.9 diesel (x58,xxx mi)
> '82 300CD (166 kmi)
> '82 300D  (74 kmi) getting donor engine-sold
> '85 300D (280,176) parts car sans engine
>
> ___
> http://www.okiebenz.com
> For new parts see official list sponsor: http://www.buymbparts.com/
> For used parts email [EMAIL PROTECTED]
>
> To Unsubscribe or change delivery options go to:
> http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>

___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] ahh the 1000SEL

2008-06-18 Thread Chuck Landenberger
>
Another response about the 1000SEL, this one from a friend of mine in  
Germany who worked for Daimler-Benz for many years

Take care,

Chuck

~
Dear Chuck,
Bei solchen Fahrzeugen habe ich Angst, weil sie vor allem fuer den  
arabischen Golf modifiziert wurden.
((Translation:  With such vehicles I have fear, because they were  
modified particularly for the Arab gulf.))
I am not feeling at ease with this type of optical modifications.
The car on ebay looks good, but any way I would like to discourage  
you going forward with this project, because you cant cheque this  
vehicle before making a decision.
When I saw in Paris at that time – 1985 - the 1000SELs and others,  
the owners,  princes and gangsters from the gulf have not been  
serious people, everything was show.
Please be careful,
Mit herzlichem Gruss
Wolfram
___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] '86 SDL no a/c

2008-06-18 Thread Bill R
Good luck with that.  Folks who do decent work should do OK, but so many
[like the guy I bought my house from] do half-assed jobs.  Always a real
stretch to get a business to be making a profit, so if you are near there
you are doing OK.
BillR.  

-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Luther
Sent: Wednesday, June 18, 2008 12:00 PM
To: Mercedes Discussion List
Subject: Re: [MBZ] '86 SDL no a/c

I don't mind, I'm hoping to not be employed there within the next 6 months.
I'm working on getting my home repair business to the self-sustaining point.

Luther

On Wed, 18 Jun 2008 10:39:43 -0500, Bill R <[EMAIL PROTECTED]> wrote:

> I don't mind.  Guess that is not the #1 consideration at the moment
though.
> BillR
>
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
> On Behalf Of Luther
> Sent: Wednesday, June 18, 2008 11:24 AM
> To: Mercedes Discussion List
> Subject: Re: [MBZ] '86 SDL no a/c
>
> Hrm, maybe if I quit my night job :D
>
> Luther
>
> On Wed, 18 Jun 2008 10:04:08 -0500, Bill R <[EMAIL PROTECTED]> wrote:
>
>> When you are practiced up would you be interested in doing another?  Mine
> is
>> back to working correctly after a month of problems, but if it lasts the
>> summer I think I had better have it done next winter.
>> BillR
>>
>>
>
>
>



-- 
Luther   KB5QHUAlma, Ark
'87 300SDL (272,xxx mi) head case
'85 Ford F250 6.9 diesel (x58,xxx mi)
'82 300CD (166 kmi)
'82 300D  (74 kmi) getting donor engine-sold
'85 300D (280,176) parts car sans engine

___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] '86 SDL no a/c

2008-06-18 Thread Luther
I don't mind, I'm hoping to not be employed there within the next 6 months.  
I'm working on getting my home repair business to the self-sustaining point.

Luther

On Wed, 18 Jun 2008 10:39:43 -0500, Bill R <[EMAIL PROTECTED]> wrote:

> I don't mind.  Guess that is not the #1 consideration at the moment though.
> BillR
>
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
> On Behalf Of Luther
> Sent: Wednesday, June 18, 2008 11:24 AM
> To: Mercedes Discussion List
> Subject: Re: [MBZ] '86 SDL no a/c
>
> Hrm, maybe if I quit my night job :D
>
> Luther
>
> On Wed, 18 Jun 2008 10:04:08 -0500, Bill R <[EMAIL PROTECTED]> wrote:
>
>> When you are practiced up would you be interested in doing another?  Mine
> is
>> back to working correctly after a month of problems, but if it lasts the
>> summer I think I had better have it done next winter.
>> BillR
>>
>>
>
>
>



-- 
Luther   KB5QHUAlma, Ark
'87 300SDL (272,xxx mi) head case
'85 Ford F250 6.9 diesel (x58,xxx mi)
'82 300CD (166 kmi)
'82 300D  (74 kmi) getting donor engine-sold
'85 300D (280,176) parts car sans engine

___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] ahh the 1000SEL

2008-06-18 Thread Mitch Haley
The thing that bugs me the most is that the car has had a VIN transplant
somewhere along the line. Those are rarely, if ever, legitimate. 

Mitch.

___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] ahh the 1000SEL

2008-06-18 Thread Chuck Landenberger
Hi all,

Here is a reply from John Olson, SL Market Letter editor to my query  
concerning a purported 1000SEL on eBay.

Take care,

Chuck
~~
"Daimler-Benz never built or sold a car called a 1000 SEL. In my  
opinion this offering should be pulled from E-bay, by E-bay, for  
gross errors in presentation. There was a car called a 1000 SEL  
marketed in Germany by a aftermarket modifier, I believe it was  
called Styling Garage. Their 1000 SEL was extrapolated from a long  
wheel base S-Class sedan -- I have an elaborate mid-1980s sales  
brochure from the Styling Garage in my archives featuring a 1000 SEL  
with widened body, conspicuous spoilers and side skirts, and  
elaborate interior, TV in the front and back seats, leather dash and  
headliner, and totally unique upholstery pattern. The Styling Garage  
prospered for a bout five years selling cars to Middle-Eastern oil  
sheiks after the first oil shortage/crisis. It was possible to get  
faster motors but the Styling Garage and other similar companies were  
infamous for extreme interiors and controversial fiberglass body  
appendages. Some of them wore this exact sale 1000 SEL nomenclature  
on their trunks.

The only part of this E-bay offerings that I can see that appears to  
be a "genuine" aftermarket part is the "1000 SEL" trunk label. The  
car "may be" an early 1986 model (first titled in 1985) with 1986  
side-moldings and allow wheels. Everything else about it looks like a  
normal, 1985 gray-market short wheelbase 500SE. The seller claims the  
the car has a 5.6 liter V8 but offers a "126-036" chassis number  
indicating a short wheel base (SE) 5.0 liter V8. A 560 SEL would have  
a 126-039 VIN. The 560 SE would be 126-038.

You are welcome to forward this e-mail to anyone in the club asking  
about this E-bay car."

// John //

John R. Olson, Editor, THE SL MARKET LETTERS
. "Publishing for Twenty-Seven Years" .
. 2020 Girard Ave. So. Minneapolis, MN 55405 USA
. Phone: (612)-377-0155 - FAX (612)-377-0157
On Jun 17, 2008, at 11:06 PM, Jim Cathey wrote:
___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] '86 SDL no a/c

2008-06-18 Thread Bill R
I don't mind.  Guess that is not the #1 consideration at the moment though.
BillR

-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Luther
Sent: Wednesday, June 18, 2008 11:24 AM
To: Mercedes Discussion List
Subject: Re: [MBZ] '86 SDL no a/c

Hrm, maybe if I quit my night job :D

Luther

On Wed, 18 Jun 2008 10:04:08 -0500, Bill R <[EMAIL PROTECTED]> wrote:

> When you are practiced up would you be interested in doing another?  Mine
is
> back to working correctly after a month of problems, but if it lasts the
> summer I think I had better have it done next winter.
> BillR
>
>



-- 
Luther   KB5QHUAlma, Ark
'87 300SDL (272,xxx mi) head case
'85 Ford F250 6.9 diesel (x58,xxx mi)
'82 300CD (166 kmi)
'82 300D  (74 kmi) getting donor engine-sold
'85 300D (280,176) parts car sans engine

___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] What would you do if diesel/gas cost $10/g

2008-06-18 Thread Bill R
That is my plan.  MIL is so afraid of fire that the first time I put a
single fire log in the ancient fireplace she cleared off the mantle just in
case... . I have another at the ready.
BillR

-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Mitch Haley
Sent: Wednesday, June 18, 2008 11:19 AM
To: Mercedes Discussion List
Subject: Re: [MBZ] What would you do if diesel/gas cost $10/g

Bill R wrote:
>  Academic now as we finally got them out - assuming
> the wire mesh holds and a full assault down the chimney is avoided.

Keep a fire ready to light in the fireplace. Light it up when you hear
intruders
approaching. Did I say rat traps were 2/$1? That's ancient history, mouse
traps
cost that much now, I think rat traps are more like $2 each.

___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] Antenna replacement

2008-06-18 Thread Jim Cathey
> I don't think that's what the small print says on the bottle.  I think 
> you are supposed to go to a dealer.

Only if you can't run the antenna down.

-- Jim


___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] '86 SDL no a/c

2008-06-18 Thread Luther
Hrm, maybe if I quit my night job :D

Luther

On Wed, 18 Jun 2008 10:04:08 -0500, Bill R <[EMAIL PROTECTED]> wrote:

> When you are practiced up would you be interested in doing another?  Mine is
> back to working correctly after a month of problems, but if it lasts the
> summer I think I had better have it done next winter.
> BillR
>
>



-- 
Luther   KB5QHUAlma, Ark
'87 300SDL (272,xxx mi) head case
'85 Ford F250 6.9 diesel (x58,xxx mi)
'82 300CD (166 kmi)
'82 300D  (74 kmi) getting donor engine-sold
'85 300D (280,176) parts car sans engine

___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] What would you do if diesel/gas cost $10/g

2008-06-18 Thread Mitch Haley
Bill R wrote:
>  Academic now as we finally got them out - assuming
> the wire mesh holds and a full assault down the chimney is avoided.

Keep a fire ready to light in the fireplace. Light it up when you hear intruders
approaching. Did I say rat traps were 2/$1? That's ancient history, mouse traps
cost that much now, I think rat traps are more like $2 each.

___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] What would you do if diesel/gas cost $10/g

2008-06-18 Thread Bill R
Unfortunately with a house built partly in the early 1900's and tripled in
the 1980's there are many parts of the attic that are either not accessible
or certainly not where I can get to them.  Those seem to be the favorite
areas for the squirrels.  Academic now as we finally got them out - assuming
the wire mesh holds and a full assault down the chimney is avoided.
BillR

-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Mitch Haley
Sent: Wednesday, June 18, 2008 11:08 AM
To: Mercedes Discussion List
Subject: Re: [MBZ] What would you do if diesel/gas cost $10/g

Bill R wrote:
>  Good recipes for squirrel?  A few hundred $$ later I have had it with
those pests.

Wooden Victor rat traps 2/$1. Either nail them to the floor or chain them up
solidly. 
You don't want a sq with a trap on his foot falling down a wall cavity.

___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] 91 350SDL tac

2008-06-18 Thread Luther
Could this be why my SDL likes to "shudder" when I drop the car to idle from a 
higher RPM?  The RPM will drop below 500 and rise back up to the set 700 rpm.  
I've tried adjusting the RPM control behind the fusebox, and it doesn't change.

Luther

On Tue, 17 Jun 2008 21:04:36 -0500, dave walton <[EMAIL PROTECTED]> wrote:

> Oh - one more thing.. The idle speed changed when it kicked in or out.
> Don't recall which was a higher rpm. If you were stopped at a light
> with the brake on when it changed, you could feel the car hunkering
> down or releasing a bit as the engine put more or less umph to the
> transmission.
>
> HTH
>
> -Dave Walton
>
> On Tue, Jun 17, 2008 at 9:54 PM, dave walton <[EMAIL PROTECTED]> wrote:
>> If it helps - when my overvoltage relay was acting up the tach went to
>> zero and the ABS light came on. Other than that things were normal.
>>
>> -Dave Walton
>>
>



-- 
Luther   KB5QHUAlma, Ark
'87 300SDL (272,xxx mi) head case
'85 Ford F250 6.9 diesel (x58,xxx mi)
'82 300CD (166 kmi)
'82 300D  (74 kmi) getting donor engine-sold
'85 300D (280,176) parts car sans engine

___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] Antenna replacement

2008-06-18 Thread pm7088
I don't think that's what the small print says on the bottle.  I think you are 
supposed to go to a dealer.

Pete

 -- Original message --
From: Jim Cathey <[EMAIL PROTECTED]>
> > My problem is that sometimes I like to take long car trips, more than 
> > 4 hours.
> 
> As long as you turn off the radio once or twice during
> such a trip then there should be no problems.
> 
> -- Jim
> 
> 
> ___
> http://www.okiebenz.com
> For new parts see official list sponsor: http://www.buymbparts.com/
> For used parts email [EMAIL PROTECTED]
> 
> To Unsubscribe or change delivery options go to:
> http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] What would you do if diesel/gas cost $10/g

2008-06-18 Thread Mitch Haley
Bill R wrote:
>  Good recipes for squirrel?  A few hundred $$ later I have had it with those 
> pests.

Wooden Victor rat traps 2/$1. Either nail them to the floor or chain them up 
solidly. 
You don't want a sq with a trap on his foot falling down a wall cavity.

___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] Antenna replacement

2008-06-18 Thread Jim Cathey
> My problem is that sometimes I like to take long car trips, more than 
> 4 hours.

As long as you turn off the radio once or twice during
such a trip then there should be no problems.

-- Jim


___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


  1   2   >