Re: [MBZ] Holed the Pan
Sweet and most bodacious List Mom, what is the charge to procure a pan to allow Gump to once more roam the streets of Seattle? It would need the drain plug installed and maybe a few pan bolts. Shipped to 98105 On Sunday, February 12, 2006, at 08:31 AM, Kaleb C. Striplin wrote: I have plenty of them around. OK Don wrote: One would think that our local list mom - used parts dealer would have chimed in by now --- On 2/11/06, redghost <[EMAIL PROTECTED]> wrote: Suggestion of non 61x models to scrounge from? there are no diesel living at the PnP and the local recycler does not bother with 70's cars On Saturday, February 11, 2006, at 04:24 PM, Jim Cathey wrote: Something jumped up and bit the sh*t out of my oil pan in Gump. Time to get out the welder! Welding oily/fuely metal can be tricky, as it soaks into the pores. Can be done, however. Of course, a U-Pull pan, if available, is easier and plenty cheap enough. -- Jim -- Clay Seattle Bioburner 1972 220D - Gump 1995 E300D - Cleo 1987 300SDL - POS - DOA The FSM would drive a Diesel Benz
Re: [MBZ] Holed the Pan
I am wanting the whole shebang new. There were a few bolts that felt cross threaded while trying to get the pan off. Going to want a fresh drain plug and gasket. On Saturday, February 11, 2006, at 07:29 PM, John Berryman wrote: On Saturday, February 11, 2006, at 10:04 PM, redghost wrote: Suggestion of non 61x models to scrounge from? there are no diesel living at the PnP and the local recycler does not bother with 70's cars Call Rusty, you'll have it at your door in no time without having to waste time and fuel scrounging around. You're going to want a new gasket too. Johnny B. I Mac Therefore I am ___ http://www.striplin.net For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://striplin.net/mailman/listinfo/mercedes_striplin.net -- Clay Seattle Bioburner 1972 220D - Gump 1995 E300D - Cleo 1987 300SDL - POS - DOA The FSM would drive a Diesel Benz
Re: [MBZ] Holed the Pan
It really was. All the way along there were minor scuffs, then that huge drain bolt grabbed on and torn the back off the pan. Wonder if I should install a skid plate. On Saturday, February 11, 2006, at 05:04 PM, John Berryman wrote: Things happen for a reason I'm told. The oil pan has to be the most vulnerable part of these cars. Johnny B. I Mac Therefore I am -- Clay Seattle Bioburner 1972 220D - Gump 1995 E300D - Cleo 1987 300SDL - POS - DOA The FSM would drive a Diesel Benz
Re: [MBZ] Holed the Pan
I have plenty of them around. OK Don wrote: One would think that our local list mom - used parts dealer would have chimed in by now --- On 2/11/06, redghost <[EMAIL PROTECTED]> wrote: Suggestion of non 61x models to scrounge from? there are no diesel living at the PnP and the local recycler does not bother with 70's cars On Saturday, February 11, 2006, at 04:24 PM, Jim Cathey wrote: Something jumped up and bit the sh*t out of my oil pan in Gump. Time to get out the welder! Welding oily/fuely metal can be tricky, as it soaks into the pores. Can be done, however. Of course, a U-Pull pan, if available, is easier and plenty cheap enough. -- Jim ___ http://www.striplin.net For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://striplin.net/mailman/listinfo/mercedes_striplin.net -- Clay Seattle Bioburner 1972 220D - Gump 1995 E300D - Cleo 1987 300SDL - POS - DOA The FSM would drive a Diesel Benz ___ http://www.striplin.net For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://striplin.net/mailman/listinfo/mercedes_striplin.net -- OK Don, KD5NRO Norman, OK '90 300D 243K, Rattled '87 300SDL 290K, Limo Lite, or blue car '81 240D 173K, Gramps, or yellow car '78 450SLC 67K, brown car '97 Ply Grand Voyager 78K Van Go ___ http://www.striplin.net For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://striplin.net/mailman/listinfo/mercedes_striplin.net -- Kaleb C. Striplin/Claremore, OK 89 560SEL, 87 300SDL, 85 380SE, 85 300D, 84 250 LWB, 83 300TD, 81 300TD, 81 240D, 81 240D, 76 450SEL, 76 240D, 76 300D, 74 240D, 69 250 http://www.striplin.net
Re: [MBZ] Holed the Pan
No joke? A new oil pan for $30? I'd have expected 8 times that. I should get one just in case. Or better yet, I'd like to fashion a skid plate. Brian 83 240D From: "Trampas" <[EMAIL PROTECTED]> Reply-To: Mercedes Discussion List <[EMAIL PROTECTED]> To: "'Mercedes Discussion List'" <[EMAIL PROTECTED]> Subject: Re: [MBZ] Holed the Pan Date: Sat, 11 Feb 2006 19:49:30 -0500 I got one from Rusty awhile back, never used it but as I recall it was only about $30. Trampas -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of redghost Sent: Saturday, February 11, 2006 7:22 PM To: Mercedes Discussion List Subject: Re: [MBZ] Holed the Pan Marshall, I am very slow, slow as my car. That is what surprised me, was I hit something going fast enough that it had force enough to go through the pan. There seems to be a dearth of 61x pans in the local market at the moment. I do want the car back on the road, and if a spare is around, I will be happy knowing whatever mystery pan killer was out there can not keep me off the road for long. On Saturday, February 11, 2006, at 04:12 PM, Marshall Booth wrote: > redghost wrote: >> Do these weld for repair, or should I just get two from Rusty for when >> the Karma Bug bites me again? > > I'd get a new pan from a recycler. Most people don't tear a hole in the > pan more than once - but if you're a really slow learner > > Marshall > -- > Marshall Booth (who doesn't respond to unsigned questions) >"der Dieseling Doktor" [EMAIL PROTECTED] > '87 300TD 182Kmi, '84 190D 2.2 229Kmi, '85 190D 2.0 161Kmi, '87 190D > 2.5 > turbo 237kmi > > ___ > http://www.striplin.net > For new parts see official list sponsor: http://www.buymbparts.com/ > For used parts email [EMAIL PROTECTED] > > To Unsubscribe or change delivery options go to: > http://striplin.net/mailman/listinfo/mercedes_striplin.net > > -- Clay Seattle Bioburner 1972 220D - Gump 1995 E300D - Cleo 1987 300SDL - POS - DOA The FSM would drive a Diesel Benz ___ http://www.striplin.net For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://striplin.net/mailman/listinfo/mercedes_striplin.net ___ http://www.striplin.net For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://striplin.net/mailman/listinfo/mercedes_striplin.net _ Express yourself instantly with MSN Messenger! Download today - it's FREE! http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/
Re: [MBZ] Holed the Pan
When I holed my aluminum pan on the big war wagon, I had it welded, and it's held for like fifteen years now. It would seem that if aluminum could handle it, steel could. Maybe go for the cheaper option? Brian From: Marshall Booth <[EMAIL PROTECTED]> Reply-To: Mercedes Discussion List <[EMAIL PROTECTED]> To: Mercedes Discussion List <[EMAIL PROTECTED]> Subject: Re: [MBZ] Holed the Pan Date: Sat, 11 Feb 2006 19:12:20 -0500 redghost wrote: > Do these weld for repair, or should I just get two from Rusty for when > the Karma Bug bites me again? I'd get a new pan from a recycler. Most people don't tear a hole in the pan more than once - but if you're a really slow learner Marshall -- Marshall Booth (who doesn't respond to unsigned questions) "der Dieseling Doktor" [EMAIL PROTECTED] '87 300TD 182Kmi, '84 190D 2.2 229Kmi, '85 190D 2.0 161Kmi, '87 190D 2.5 turbo 237kmi ___ http://www.striplin.net For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://striplin.net/mailman/listinfo/mercedes_striplin.net _ On the road to retirement? Check out MSN Life Events for advice on how to get there! http://lifeevents.msn.com/category.aspx?cid=Retirement
Re: [MBZ] Holed the Pan
On Saturday, February 11, 2006, at 10:04 PM, redghost wrote: Suggestion of non 61x models to scrounge from? there are no diesel living at the PnP and the local recycler does not bother with 70's cars Call Rusty, you'll have it at your door in no time without having to waste time and fuel scrounging around. You're going to want a new gasket too. Johnny B. I Mac Therefore I am
Re: [MBZ] Holed the Pan
One would think that our local list mom - used parts dealer would have chimed in by now --- On 2/11/06, redghost <[EMAIL PROTECTED]> wrote: > Suggestion of non 61x models to scrounge from? there are no diesel > living at the PnP and the local recycler does not bother with 70's cars > > On Saturday, February 11, 2006, at 04:24 PM, Jim Cathey wrote: > > >> Something jumped up and bit the sh*t out of my oil pan in Gump. > > > > Time to get out the welder! Welding oily/fuely metal can be tricky, > > as it soaks into the pores. Can be done, however. Of course, a > > U-Pull pan, if available, is easier and plenty cheap enough. > > > > -- Jim > > > > > > ___ > > http://www.striplin.net > > For new parts see official list sponsor: http://www.buymbparts.com/ > > For used parts email [EMAIL PROTECTED] > > > > To Unsubscribe or change delivery options go to: > > http://striplin.net/mailman/listinfo/mercedes_striplin.net > > > > > > > -- > Clay > Seattle Bioburner > > 1972 220D - Gump > 1995 E300D - Cleo > 1987 300SDL - POS - DOA > The FSM would drive a Diesel Benz > > > ___ > http://www.striplin.net > For new parts see official list sponsor: http://www.buymbparts.com/ > For used parts email [EMAIL PROTECTED] > > To Unsubscribe or change delivery options go to: > http://striplin.net/mailman/listinfo/mercedes_striplin.net > -- OK Don, KD5NRO Norman, OK '90 300D 243K, Rattled '87 300SDL 290K, Limo Lite, or blue car '81 240D 173K, Gramps, or yellow car '78 450SLC 67K, brown car '97 Ply Grand Voyager 78K Van Go
Re: [MBZ] Holed the Pan
Suggestion of non 61x models to scrounge from? there are no diesel living at the PnP and the local recycler does not bother with 70's cars On Saturday, February 11, 2006, at 04:24 PM, Jim Cathey wrote: Something jumped up and bit the sh*t out of my oil pan in Gump. Time to get out the welder! Welding oily/fuely metal can be tricky, as it soaks into the pores. Can be done, however. Of course, a U-Pull pan, if available, is easier and plenty cheap enough. -- Jim ___ http://www.striplin.net For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://striplin.net/mailman/listinfo/mercedes_striplin.net -- Clay Seattle Bioburner 1972 220D - Gump 1995 E300D - Cleo 1987 300SDL - POS - DOA The FSM would drive a Diesel Benz
Re: [MBZ] Holed the Pan
I think I've got a couple spare pans lying around...well, they're still attached to NFG engines, but around nonetheless. On 2/11/06, redghost <[EMAIL PROTECTED]> wrote: > There seems to be a dearth of 61x pans in the local market at the > moment. I do want the car back on the road, and if a spare is around, Casey Olympia, WA Biodiesel: "I drive in a persistent vegetative state" '87 300TD intercooler (211k) '84 300D (210k) Gashuffer: '89 Vanagon Wolfsburg Edition (187K)
Re: [MBZ] Holed the Pan
On Saturday, February 11, 2006, at 07:49 PM, Trampas wrote: I got one from Rusty awhile back, never used it but as I recall it was only about $30. Trampas I hate quoting other people's prices but I want to say the pan I got from Rusty last year was like $13.00 and the gasket was more like $17.00 so $30.00 plus oil sounds about right. In fact I had to buy another one this past year as my friend used my 300CD while I was away ( after hearing a story from a local tow truck driver about a girl he was seeing running off the road in a Mercedes) I believe he lied to me and let her drive my car. He acted surprised when I told him that while I was away someone went off-road with my car. When I left for vacation, it was in my driveway. It was parked over a sandy spot across the street when I returned. Johnny B. I Mac Therefore I am
Re: [MBZ] Holed the Pan
Mercedes had a prominently offered set of steel skid plates in the late 50s and 60s (or so), to protect the oil pan and other vulnerable parts. I was stationed in Europe at the time, and remember seeing that in the options list. It might be a good idea to look into that if you drive in areas where you can get that kind of damage. Werner - Original Message - From: "John Berryman" <[EMAIL PROTECTED]> To: "Mercedes Discussion List" <[EMAIL PROTECTED]> Sent: Saturday, February 11, 2006 8:04 PM Subject: Re: [MBZ] Holed the Pan On Saturday, February 11, 2006, at 06:58 PM, redghost wrote: Could have been. Karma was running low. Racing to show one of the houses I rent out. This was going to be for a pack of mezkins with lots of cars. Guess the man upstairs did not want that to take place. Things happen for a reason I'm told. The oil pan has to be the most vulnerable part of these cars. Johnny B. I Mac Therefore I am ___ http://www.striplin.net For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://striplin.net/mailman/listinfo/mercedes_striplin.net
Re: [MBZ] Holed the Pan
On Saturday, February 11, 2006, at 07:02 PM, redghost wrote: Do these weld for repair, or should I just get two from Rusty for when the Karma Bug bites me again? Just get one and be more careful. They're cheap enough to make you think the gasket is overpriced. Johnny B. I Mac Therefore I am
Re: [MBZ] Holed the Pan
On Saturday, February 11, 2006, at 06:58 PM, redghost wrote: Could have been. Karma was running low. Racing to show one of the houses I rent out. This was going to be for a pack of mezkins with lots of cars. Guess the man upstairs did not want that to take place. Things happen for a reason I'm told. The oil pan has to be the most vulnerable part of these cars. Johnny B. I Mac Therefore I am
Re: [MBZ] Holed the Pan
I got one from Rusty awhile back, never used it but as I recall it was only about $30. Trampas -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of redghost Sent: Saturday, February 11, 2006 7:22 PM To: Mercedes Discussion List Subject: Re: [MBZ] Holed the Pan Marshall, I am very slow, slow as my car. That is what surprised me, was I hit something going fast enough that it had force enough to go through the pan. There seems to be a dearth of 61x pans in the local market at the moment. I do want the car back on the road, and if a spare is around, I will be happy knowing whatever mystery pan killer was out there can not keep me off the road for long. On Saturday, February 11, 2006, at 04:12 PM, Marshall Booth wrote: > redghost wrote: >> Do these weld for repair, or should I just get two from Rusty for when >> the Karma Bug bites me again? > > I'd get a new pan from a recycler. Most people don't tear a hole in the > pan more than once - but if you're a really slow learner > > Marshall > -- > Marshall Booth (who doesn't respond to unsigned questions) >"der Dieseling Doktor" [EMAIL PROTECTED] > '87 300TD 182Kmi, '84 190D 2.2 229Kmi, '85 190D 2.0 161Kmi, '87 190D > 2.5 > turbo 237kmi > > ___ > http://www.striplin.net > For new parts see official list sponsor: http://www.buymbparts.com/ > For used parts email [EMAIL PROTECTED] > > To Unsubscribe or change delivery options go to: > http://striplin.net/mailman/listinfo/mercedes_striplin.net > > -- Clay Seattle Bioburner 1972 220D - Gump 1995 E300D - Cleo 1987 300SDL - POS - DOA The FSM would drive a Diesel Benz ___ http://www.striplin.net For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://striplin.net/mailman/listinfo/mercedes_striplin.net
Re: [MBZ] Holed the Pan
Something jumped up and bit the sh*t out of my oil pan in Gump. Time to get out the welder! Welding oily/fuely metal can be tricky, as it soaks into the pores. Can be done, however. Of course, a U-Pull pan, if available, is easier and plenty cheap enough. -- Jim
Re: [MBZ] Holed the Pan
Marshall, I am very slow, slow as my car. That is what surprised me, was I hit something going fast enough that it had force enough to go through the pan. There seems to be a dearth of 61x pans in the local market at the moment. I do want the car back on the road, and if a spare is around, I will be happy knowing whatever mystery pan killer was out there can not keep me off the road for long. On Saturday, February 11, 2006, at 04:12 PM, Marshall Booth wrote: redghost wrote: Do these weld for repair, or should I just get two from Rusty for when the Karma Bug bites me again? I'd get a new pan from a recycler. Most people don't tear a hole in the pan more than once - but if you're a really slow learner Marshall -- Marshall Booth (who doesn't respond to unsigned questions) "der Dieseling Doktor" [EMAIL PROTECTED] '87 300TD 182Kmi, '84 190D 2.2 229Kmi, '85 190D 2.0 161Kmi, '87 190D 2.5 turbo 237kmi ___ http://www.striplin.net For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://striplin.net/mailman/listinfo/mercedes_striplin.net -- Clay Seattle Bioburner 1972 220D - Gump 1995 E300D - Cleo 1987 300SDL - POS - DOA The FSM would drive a Diesel Benz
Re: [MBZ] Holed the Pan
redghost wrote: Do these weld for repair, or should I just get two from Rusty for when the Karma Bug bites me again? I'd get a new pan from a recycler. Most people don't tear a hole in the pan more than once - but if you're a really slow learner Marshall -- Marshall Booth (who doesn't respond to unsigned questions) "der Dieseling Doktor" [EMAIL PROTECTED] '87 300TD 182Kmi, '84 190D 2.2 229Kmi, '85 190D 2.0 161Kmi, '87 190D 2.5 turbo 237kmi
Re: [MBZ] Holed the Pan
Do these weld for repair, or should I just get two from Rusty for when the Karma Bug bites me again? On Saturday, February 11, 2006, at 02:00 PM, Zeitgeist wrote: I think the steel portion of the pan from any OM61X engine will work. btw: The same thing happened to my old 220D back when my ex drove it down a steep hill at high speed, then bottomed out, tearing a dime-sized hole in the front edge. I'm surprised as hell that she even noticed it before draining the engine dry--clearly a miracle from on high. On 2/11/06, redghost <[EMAIL PROTECTED]> wrote: Something jumped up and bit the sh*t out of my oil pan in Gump. Got about a half mile before I noticed the pressure dropping. Was able to pull into a gas station and call for a tow while she piddled what little oil she had left. Just want to kick yourself in the nuts when that happens and you know you should have grabbed a pan off a om 616 for just in case. Casey Olympia, WA Biodiesel: "I drive in a persistent vegetative state" '87 300TD intercooler (211k) '84 300D (210k) Gashuffer: '89 Vanagon Wolfsburg Edition (187K) ___ http://www.striplin.net For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://striplin.net/mailman/listinfo/mercedes_striplin.net -- Clay Seattle Bioburner 1972 220D - Gump 1995 E300D - Cleo 1987 300SDL - POS - DOA The FSM would drive a Diesel Benz
Re: [MBZ] Holed the Pan
Could have been. Karma was running low. Racing to show one of the houses I rent out. This was going to be for a pack of mezkins with lots of cars. Guess the man upstairs did not want that to take place. On Saturday, February 11, 2006, at 01:37 PM, John Berryman wrote: On Saturday, February 11, 2006, at 03:55 PM, redghost wrote: Something jumped up and bit the sh*t out of my oil pan in Gump. Got about a half mile before I noticed the pressure dropping. Was able to pull into a gas station and call for a tow while she piddled what little oil she had left. Just want to kick yourself in the nuts when that happens and you know you should have grabbed a pan off a om 616 for just in case. -- Clay Could have been the Kharma bug taking a bite. Johnny B. I Mac Therefore I am ___ http://www.striplin.net For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://striplin.net/mailman/listinfo/mercedes_striplin.net -- Clay Seattle Bioburner 1972 220D - Gump 1995 E300D - Cleo 1987 300SDL - POS - DOA The FSM would drive a Diesel Benz
Re: [MBZ] Holed the Pan
I think the steel portion of the pan from any OM61X engine will work. btw: The same thing happened to my old 220D back when my ex drove it down a steep hill at high speed, then bottomed out, tearing a dime-sized hole in the front edge. I'm surprised as hell that she even noticed it before draining the engine dry--clearly a miracle from on high. On 2/11/06, redghost <[EMAIL PROTECTED]> wrote: > Something jumped up and bit the sh*t out of my oil pan in Gump. Got > about a half mile before I noticed the pressure dropping. Was able to > pull into a gas station and call for a tow while she piddled what > little oil she had left. Just want to kick yourself in the nuts when > that happens and you know you should have grabbed a pan off a om 616 > for just in case. Casey Olympia, WA Biodiesel: "I drive in a persistent vegetative state" '87 300TD intercooler (211k) '84 300D (210k) Gashuffer: '89 Vanagon Wolfsburg Edition (187K)
Re: [MBZ] Holed the Pan
On Saturday, February 11, 2006, at 03:55 PM, redghost wrote: Something jumped up and bit the sh*t out of my oil pan in Gump. Got about a half mile before I noticed the pressure dropping. Was able to pull into a gas station and call for a tow while she piddled what little oil she had left. Just want to kick yourself in the nuts when that happens and you know you should have grabbed a pan off a om 616 for just in case. -- Clay Could have been the Kharma bug taking a bite. Johnny B. I Mac Therefore I am
[MBZ] Holed the Pan
Something jumped up and bit the sh*t out of my oil pan in Gump. Got about a half mile before I noticed the pressure dropping. Was able to pull into a gas station and call for a tow while she piddled what little oil she had left. Just want to kick yourself in the nuts when that happens and you know you should have grabbed a pan off a om 616 for just in case. -- Clay Seattle Bioburner 1972 220D - Gump 1995 E300D - Cleo 1987 300SDL - POS - DOA The FSM would drive a Diesel Benz