Re: [MBZ] Removing Dash Ignition on w115

2010-05-02 Thread redghost

RUN AWAY!

If you have done it once, you can do it by feel.  Biggest issue I had  
was getting the dash back in.   Just look for all the screws and  
bolts, label as to where you got them. (pictures are good) and  
disassemble the whole front.  There are three bolts with 10mm nuts  
holding the dash in.  Center and at the far end of the vents.


Pull the glass side up then pull the cabin side in toward you.  Pick a  
side (L/R) and lift around A pillar.


Clay



On May 1, 2010, at 9:57 AM, OK Don wrote:

I removed the dash, nd lots of other things to replace the blower  
motor in a

115 once - many years ago. Figure about 8 hours to get it out. I don't
remember the details however.

On Sat, May 1, 2010 at 8:19 AM, Joe Sasser joesas...@mac.com wrote:

I've finally started on a former Kaleb-Kar, and need to yank the  
dash 

ignition switch from the dash.

Anybody here done this before? I've got an intact dash  working  
ignition

switch to replace them with.

Thanks


--
OK Don
Panic! (the national past time).


___
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



___
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] Removing Dash Ignition on w115

2010-05-02 Thread LWB250
What he said.
I did a 114 years ago to replace the dreaded heater blower (and do some AC work 
as well) and I still have the scars to show for it.
I would add that it took me all of two full days to accomplish the feat, too.
Dan


--- On Sun, 5/2/10, redghost redgh...@comcast.net wrote:

From: redghost redgh...@comcast.net
Subject: Re: [MBZ] Removing Dash  Ignition on w115
To: Mercedes Discussion List mercedes@okiebenz.com
Date: Sunday, May 2, 2010, 4:20 PM

RUN AWAY!

If you have done it once, you can do it by feel.  Biggest issue I had was 
getting the dash back in.   Just look for all the screws and bolts, label as to 
where you got them. (pictures are good) and disassemble the whole front.  There 
are three bolts with 10mm nuts holding the dash in.  Center and at the far end 
of the vents.

Pull the glass side up then pull the cabin side in toward you.  Pick a side 
(L/R) and lift around A pillar.

Clay





  
___
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] Removing Dash Ignition on w115

2010-05-02 Thread Jim Cathey
I did a 114 years ago to replace the dreaded heater blower (and do 
some AC work as well) and I still have the scars to show for it.
I would add that it took me all of two full days to accomplish the 
feat, too.


Wimps!  I've had the dash out of my 560 SL, twice, the dash
out of the 450 SL, and out of the 380 SL.  Haven't done my
wife's 560 SL yet, but I expect I'll have to.

No, I don't want to do another one either, but it's not _that_ bad!
They go somewhat faster after you've done one.  Still, you do end
up pretty much gutting the car...

-- Jim



___
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] Removing Dash Ignition on w115

2010-05-02 Thread OK Don
Replacing the blower in a 114/115 is a bit more involved than pulling the
dash -- BTDT - x2.

On Sun, May 2, 2010 at 6:35 PM, Jim Cathey j...@windwireless.net wrote:


 Wimps!  I've had the dash out of my 560 SL, twice, the dash
 out of the 450 SL, and out of the 380 SL.  Haven't done my
 wife's 560 SL yet, but I expect I'll have to.

 No, I don't want to do another one either, but it's not _that_ bad!
 They go somewhat faster after you've done one.  Still, you do end
 up pretty much gutting the car...

 -- Jim


-- 
OK Don
Panic! (the national past time).
___
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] Removing Dash Ignition on w115

2010-05-02 Thread OK Don
Same time for my first one. I replaced the second one through the center
speaker hole - only took all of one day that way.

On Sun, May 2, 2010 at 4:57 PM, LWB250 lwb...@yahoo.com wrote:

 What he said.
 I did a 114 years ago to replace the dreaded heater blower (and do some AC
 work as well) and I still have the scars to show for it.
 I would add that it took me all of two full days to accomplish the feat,
 too.
 Dan

-- 
OK Don
Panic! (the national past time).
___
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] Removing Dash Ignition on w115

2010-05-01 Thread OK Don
I removed the dash, nd lots of other things to replace the blower motor in a
115 once - many years ago. Figure about 8 hours to get it out. I don't
remember the details however.

On Sat, May 1, 2010 at 8:19 AM, Joe Sasser joesas...@mac.com wrote:

 I've finally started on a former Kaleb-Kar, and need to yank the dash 
 ignition switch from the dash.

 Anybody here done this before? I've got an intact dash  working ignition
 switch to replace them with.

 Thanks


 --
 OK Don
 Panic! (the national past time).

___
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] Removing Dash Ignition on w115

2010-05-01 Thread Jim Cathey

yank the dash  ignition switch from the dash.
Anybody here done this before?


Only on a 107.  Mostly you remove everything that
looks like it's in the way, especially the center
console, and remove the three (?) mounting nuts that
hold the dash in.

-- Jim



___
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com