Re: Recommendation for T41 Wireless

2006-10-15 Thread Stephan Tesch
Am Sonntag, 15. Oktober 2006 08:57 schrieben Sie:

Hi!

 I was recently given an IBM T41 laptop. I've had little experience
 of laptop hardware, and no experience of wireless. The laptop itself
 didn't come with any wireless hardware (which, I gather, is a good thing
 as it would have been closed intel stuff).

 I would like to get some sort of wireless card for it. What would the users
 of this list recommend? It'll run OpenBSD 4.0, of course.

Personally, I run a ral(4) MiniPCI wireless card on my router (WRAP). It works 
quite well compared to the ath I had before. And those cards are quite cheap.

ral0 at pci0 dev 13 function 0 Ralink RT2560 rev 0x01: irq 12, address ...
ral0: MAC/BBP RT2560 (rev 0x04), RF RT2525

Hope this helps,
Stephan



harddisk causes page fault on amd64

2006-06-22 Thread Stephan Tesch
Hi there,

$subject sums it up real nice :) 

I'm trying to get access to two older harddisks on my -current box, but I 
can't even finish to boot the kernel. dmesg and page fault are provided.

Please CC me, as I'm currently not tracking [EMAIL PROTECTED]

If you need more information, I'd be happy to provide it.

Thanks,
Stephan

 OpenBSD/amd64 BOOT 2.11
boot
booting hd0a:/bsd: 3854724+832968+627488+0+420752 [80+324408+200876]=0x9f92c4
entry point at 0x1001e0 [7205c766, 3404, 24448b12, ac20a304]{[ using 
526136 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2006 OpenBSD. All rights reserved.  http://www.OpenBSD.org

OpenBSD 3.9-current (GENERIC) #594: Sun Jun 18 12:31:51 MDT 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 2147020800 (2096700K)
avail mem = 1835540480 (1792520K)
using 22937 buffers containing 214908928 bytes (209872K) of memory
mainbus0 (root)
bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xf0100 (40 entries)
bios0: Gigabyte Technology Co., Ltd. GA-K8NMF-9
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Athlon(tm) 64 Processor 3000+, 1809.48 MHz
cpu0: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 
16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: Cool`n'Quiet K8 1809 Mhz: speeds: 1800 1000 Mhz
pci0 at mainbus0 bus 0: configuration mode 1
NVIDIA nForce4 DDR rev 0xa3 at pci0 dev 0 function 0 not configured
pcib0 at pci0 dev 1 function 0 NVIDIA nForce4 ISA rev 0xa3
nviic0 at pci0 dev 1 function 1 NVIDIA nForce4 SMBus rev 0xa2
iic0 at nviic0
iic1 at nviic0
ohci0 at pci0 dev 2 function 0 NVIDIA nForce4 USB rev 0xa2: irq 10, version 
1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: NVIDIA OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 10 ports with 10 removable, self powered
ehci0 at pci0 dev 2 function 1 NVIDIA nForce4 USB rev 0xa3: irq 11
usb1 at ehci0: USB revision 2.0
uhub1 at usb1
uhub1: NVIDIA EHCI root hub, rev 2.00/1.00, addr 1
uhub1: 10 ports with 10 removable, self powered
auich0 at pci0 dev 4 function 0 NVIDIA nForce4 AC97 rev 0xa2: irq 12, 
nForce4 AC97
ac97: codec id 0x414c4790 (Avance Logic ALC850)
audio0 at auich0
pciide0 at pci0 dev 6 function 0 NVIDIA nForce4 IDE rev 0xa2: DMA, channel 0 
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: Maxtor 6B200P0
wd0: 16-sector PIO, LBA48, 194479MB, 398294975 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
wd1 at pciide0 channel 1 drive 0: WDC AC2850F
wd1: 16-sector PIO, LBA, 814MB, 1667232 sectors
wd2 at pciide0 channel 1 drive 1: ST3290A
wd2: 32-sector PIO, CHS, 249MB, 1001 cyl, 15 head, 34 sec, 510510 sectors
wd1(pciide0:1:0): using PIO mode 3, DMA mode 1
wd2(pciide0:1:1): using PIO mode 3
ppb0 at pci0 dev 9 function 0 NVIDIA nForce4 PCI-PCI rev 0xa2
pci1 at ppb0 bus 1
ral0 at pci1 dev 7 function 0 Ralink RT2560 rev 0x01: irq 11, address 
00:09:f3:70:25:a6
ral0: MAC/BBP RT2560 (rev 0x04), RF RT2525
nfe0 at pci0 dev 10 function 0 NVIDIA CK804 LAN rev 0xa3: irq 5, address 
00:14:85:0c:12:fe
rlphy0 at nfe0 phy 1: RTL8201L 10/100 PHY, rev. 1
ppb1 at pci0 dev 11 function 0 NVIDIA nForce4 PCIE rev 0xa3
pci2 at ppb1 bus 2
ppb2 at pci0 dev 12 function 0 NVIDIA nForce4 PCIE rev 0xa3
pci3 at ppb2 bus 3
ppb3 at pci0 dev 13 function 0 NVIDIA nForce4 PCIE rev 0xa3
pci4 at ppb3 bus 4
ppb4 at pci0 dev 14 function 0 NVIDIA nForce4 PCIE rev 0xa3
pci5 at ppb4 bus 5
vga1 at pci5 dev 0 function 0 NVIDIA GeForce 6200 rev 0xa1
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pchb0 at pci0 dev 24 function 0 AMD AMD64 HyperTransport rev 0x00
pchb1 at pci0 dev 24 function 1 AMD AMD64 Address Map rev 0x00
pchb2 at pci0 dev 24 function 2 AMD AMD64 DRAM Cfg rev 0x00
pchb3 at pci0 dev 24 function 3 AMD AMD64 Misc Cfg rev 0x00
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0 port 0x290/8: IT87
uhidev0 at uhub0 port 7 configuration 1 interface 0
uhidev0: Microsoft Microsoft IntelliMouse. Explorer, rev 1.10/1.14, addr 2, 
iclass 3/1
ums0 at uhidev0: 5 buttons and Z dir.
wsmouse0 at ums0 mux 0
uhidev1 at uhub0 port 8 configuration 1 interface 0
uhidev1: Cherry Mikroschalter product 0x0023, rev 2.00/0.20, addr 3, iclass 
3/1
ukbd0 at 

-current crashes on amd64

2006-03-01 Thread Stephan Tesch
Hi guys,

After upgrading my -current system to the newest snapshot the system crashes 
on while booting the kernel. This is an amd64 on an Gigabyte GA-K8NMF. Is 
this problem known already (haven't found anything in last days mails)? 

This happens for bsd and bsd.mp, but not bsd.rd!

If you need further infos, I'd be happy to provide them!

Regards, Stephan

 OpenBSD/amd64 BOOT 2.11
boot boot
booting hd0a:/bsd: 3697028+694336+601400+0+422832 [80+308208+189663]=0x9a3fd0
entry point at 0x1001e0 [7205c766, 3404, 24448b12, be60a304]{[ using 
498720 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2006 OpenBSD. All rights reserved.  http://www.OpenBSD.org

OpenBSD 3.9 (GENERIC) #450: Mon Feb 27 14:07:30 MST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 2147020800 (2096700K)
avail mem = 1835884544 (1792856K)
using 22937 buffers containing 214908928 bytes (209872K) of memory
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Athlon(tm) 64 Processor 3000+, 1809.48 MHz
cpu0: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 
16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
pci0 at mainbus0 bus 0: configuration mode 1
NVIDIA nForce4 DDR rev 0xa3 at pci0 dev 0 function 0 not configured
pcib0 at pci0 dev 1 function 0 NVIDIA nForce4 ISA rev 0xa3
nviic0 at pci0 dev 1 function 1 NVIDIA nForce4 SMBus rev 0xa2
iic0 at nviic0
iic1 at nviic0
ohci0 at pci0 dev 2 function 0 NVIDIA nForce4 USB rev 0xa2: irq 10, version 
1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: NVIDIA OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 10 ports with 10 removable, self powered
ehci0 at pci0 dev 2 function 1 NVIDIA nForce4 USB rev 0xa3: irq 11
usb1 at ehci0: USB revision 2.0
uhub1 at usb1
uhub1: NVIDIA EHCI root hub, rev 2.00/1.00, addr 1
uhub1: 10 ports with 10 removable, self powered
auich0 at pci0 dev 4 function 0 NVIDIA nForce4 AC97 rev 0xa2: irq 12, 
nForce4 AC97
ac97: codec id 0x414c4790 (Avance Logic ALC850)
audio0 at auich0
pciide0 at pci0 dev 6 function 0 NVIDIA nForce4 IDE rev 0xa2: DMA, channel 0 
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: Maxtor 6B200P0
wd0: 16-sector PIO, LBA48, 194479MB, 398294975 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: HL-DT-ST, DVDRAM GSA-4120B, A111 SCSI0 5/cdrom 
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ppb0 at pci0 dev 9 function 0 NVIDIA nForce4 PCI-PCI rev 0xa2
pci1 at ppb0 bus 1
skc0 at pci1 dev 7 function 0 Schneider  Koch SK-98xx v2.0 rev 0x10, 
Marvell Yukon (0x1): irq 11
sk0 at skc0 port A, address 00:00:5a:9f:01:bc
eephy0 at sk0 phy 0: Marvell 88E1011 Gigabit PHY, rev. 3
nfe0 at pci0 dev 10 function 0 NVIDIA CK804 LAN rev 0xa3: irq 5, address 
00:14:85:0c:12:fe
rlphy0 at nfe0 phy 1: RTL8201L 10/100 PHY, rev. 1
ppb1 at pci0 dev 11 function 0 NVIDIA nForce4 PCIE rev 0xa3
pci2 at ppb1 bus 2
ppb2 at pci0 dev 12 function 0 NVIDIA nForce4 PCIE rev 0xa3
pci3 at ppb2 bus 3
ppb3 at pci0 dev 13 function 0 NVIDIA nForce4 PCIE rev 0xa3
pci4 at ppb3 bus 4
ppb4 at pci0 dev 14 function 0 NVIDIA nForce4 PCIE rev 0xa3
pci5 at ppb4 bus 5
vga1 at pci5 dev 0 function 0 vendor NVIDIA, unknown product 0x0161 rev 0xa1
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pchb0 at pci0 dev 24 function 0 AMD AMD64 HyperTransport rev 0x00
pchb1 at pci0 dev 24 function 1 AMD AMD64 Address Map rev 0x00
pchb2 at pci0 dev 24 function 2 AMD AMD64 DRAM Cfg rev 0x00
pchb3 at pci0 dev 24 function 3 AMD AMD64 Misc Cfg rev 0x00
isa0 at pcib0
isadma0 at isa0panic: isadmaattach: can not create DMA map
Stopped at  Debugger+0x5:   leave
RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS PANIC!
DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION!
ddb trace
Debugger() at Debugger+0x5
panic() at panic+0x12a
isadmaattach() at isadmaattach+0x87
config_attach() at config_attach+0x10f
isascan() at isascan+0x14d
config_scan() at config_scan+0xce
config_attach() at config_attach+0x10f
pcib_callback() at pcib_callback+0x4e
config_process_deferred_children() at config_process_deferred_children+0x5f
config_attach() at config_attach+0x117
mainbus_attach() at mainbus_attach+0x121
config_attach() at config_attach+0x10f
cpu_configure() at cpu_configure+0x1c
main() at main+0x35c
end trace frame: 0x0, count: -14
ddb ps
   PID   PPID   PGRPUID  S   FLAGS  WAIT   COMMAND
*0 -1   

Re: Can't set timezone in KDE - only UTC is shown

2006-01-30 Thread Stephan Tesch
Am Sonntag, 29. Januar 2006 20:02 schrieben Sie:

Hi Alex,

 does anydody please know, why can't I set timezone in KDE?
 When I right-click on the clock - Show timezone - Configure timezones
 then there is only one timezone - UTC. And the KDE clock is off by 1h.

Got the same issue here. This happened after the upgrade of KDE3.4.x to 3.5. 
Seems like a bug in the application to me..

Regards,
Stephan



IP address vanishes

2005-12-03 Thread Stephan Tesch
Hi everyone,

I've got a huge problem with -current as of a couple of days ago. 

I'm using dhcp to assign a static ip address to my notebook. This works quite 
fine, so far. Booting up takes too long for me, so I just suspend (RAM) this 
notebook (eg. over night). 

Once I wake the system up, the IP address is gone:

$ ifconfig fxp0
fxp0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST mtu 1500
lladdr 00:03:47:1f:90:7d
groups: egress
media: Ethernet autoselect (100baseTX full-duplex)
status: active
inet6 fe80::203:47ff:fe1f:907d%fxp0 prefixlen 64 scopeid 0x1

dhclient is still running:

$ pgrep dhclient
9269
223

There's nothing unusual in syslog:

$ tail /var/log/daemon
Dec  2 17:15:12 bilbo ntpd[22087]: peer 192.168.10.254 now valid
Dec  2 17:16:06 bilbo ntpd[3864]: adjusting local clock by 1.762492s
Dec  2 17:20:26 bilbo ntpd[22087]: clock is now synced
Dec  3 10:59:10 bilbo apmd: system resumed from APM sleep
Dec  3 11:00:25 bilbo dhclient[9269]: DHCPDISCOVER on fxp0 to 255.255.255.255 
port 67 interval 1
Dec  3 11:00:25 bilbo dhclient[9269]: DHCPOFFER from 192.168.10.254
Dec  3 11:00:27 bilbo dhclient[9269]: DHCPREQUEST on fxp0 to 255.255.255.255 
port 67
Dec  3 11:00:27 bilbo dhclient[9269]: DHCPACK from 192.168.10.254
Dec  3 11:00:27 bilbo dhclient[9269]: bound to 192.168.10.13 -- renewal in 
21600 seconds.
Dec  3 11:00:46 bilbo ntpd[22087]: peer 192.168.10.254 now invalid

But here's the interesting part: I'm not able to assign this IP address to 
fxp0 (remember: it didn't show up in ifconfig)

$ sudo ifconfig fxp0 192.168.10.13
ifconfig: SIOCAIFADDR: File exists

Connections to other IPs fail, of course. Any idea what's causing this?

Here's the complete dmesg of my machine:

OpenBSD 3.8-current (GENERIC) #271: Sat Nov 26 13:51:55 MST 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III (GenuineIntel 686-class) 548 MHz
cpu0: 
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem  = 536387584 (523816K)
avail mem = 482508800 (471200K)
using 4278 buffers containing 26923008 bytes (26292K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(04) BIOS, date 12/21/99, BIOS32 rev. 0 @ 0xfd820
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xfd7b0/0x850
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdee0/208 (11 entries)
pcibios0: PCI Interrupt Router at 000:07:0 (Intel 82371FB ISA rev 0x00)
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc/0xc000 0xcc000/0x1800 0xe/0x1
cpu0 at mainbus0
esm at mainbus0 not configured
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 Intel 82443BX AGP rev 0x03
ppb0 at pci0 dev 1 function 0 Intel 82443BX AGP rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 S3 Savage/IX-MV rev 0x11
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
cbb0 at pci0 dev 2 function 0 Texas Instruments PCI1450 CardBus rev 0x03: 
irq 5
cbb1 at pci0 dev 2 function 1 Texas Instruments PCI1450 CardBus rev 0x03: 
irq 7
fxp0 at pci0 dev 3 function 0 Intel 82557 rev 0x09, i82559S: irq 9, address 
00:03:47:1f:90:7d
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
Xircom Mini-PCI V.90 56k modem rev 0x00 at pci0 dev 3 function 1 not 
configured
clcs0 at pci0 dev 5 function 0 Cirrus Logic CS4280/46xx CrystalClear rev 
0x01: irq 5
ac97: codec id 0x43525914 (Cirrus Logic CS4297A rev 4)
ac97: codec features headphone, 20 bit DAC, 18 bit ADC, Crystal Semi 3D
pcib0 at pci0 dev 7 function 0 Intel 82371AB PIIX4 ISA rev 0x02
pciide0 at pci0 dev 7 function 1 Intel 82371AB IDE rev 0x01: DMA, channel 0 
wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: FUJITSU MHT2060AT
wd0: 16-sector PIO, LBA, 57231MB, 117210240 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: TOSHIBA, DVD-ROM SD-C2302, 1127 SCSI0 5/cdrom 
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 7 function 2 Intel 82371AB USB rev 0x01: irq 10
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
Intel 82371AB Power rev 0x03 at pci0 dev 7 function 3 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0 cacheline 0x8, lattimer 0xb0
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 3 device 0 cacheline 0x8, lattimer 0xb0
pcmcia1 at cardslot1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at 

Re: I have $300

2005-11-30 Thread Stephan Tesch
Am Dienstag, 29. November 2005 15:16 schrieben Sie:

Hi Marco,

 The moral of the story is that you don't need much disk for a
 firewall.  Besides you said no moving parts, RAID by definition
 adds more moving parts of the kind that fail most often.

Well, you could always do software RAID of CF-based disks ;-)

I'm outta here,
Stephan



Re: bios support for console redirection to the serial port

2005-11-27 Thread Stephan Tesch
Am Sonntag, 27. November 2005 00:47 schrieben Sie:

Hi Kevin,

 I'm in the market for a *tower-type* server box (or m/b to put in a
 tower) on which to run OBSD and a very important criteria for me is this
 one.  I'd also like at least two cpu sockets and more PCI slots than
 average but that's easy to find out before buying.  After googling for
 hours, I'm finding that this (redirection of textual VGA output to the
 serial port) is a little-advertised characteristic in server boards and
 boxes.

I'm using the (somewhat old) Tyan Tiger MP board which has a very nice console 
redirection, that also works with OpenBSD (handover to console redirection on 
the same port works).

Regards,
Stephan



Re: Problems With Thinkpad R51

2005-10-13 Thread Stephan Tesch
Am Donnerstag, 13. Oktober 2005 05:14 schrieben Sie:

 When i flip down the lcd of the computer, when i turn it up again i
 got a black screen with just a cursor blinking, my keyboard doesn't
 work.. the only way to get my computer back without restarting the
 system (using the power button, cause i can't control it) or going
 trough ssh and killing the X server..

Hi,

I got the same problem on my T20. Just a workaround, which might be suitable 
for you: run 'zzz' from your X session and your notebook goes off to sleep. 
Then you can close the lid and as soon as you reopen it, it awakes.

A fix for the mentioned behavior would be appreciated. Any clues how to 
produce useful debugging info?

Regards,
Stephan



Re: xorg with Nvidia Go5600 at 1600x1200

2005-10-06 Thread Stephan Tesch
Am Donnerstag, 6. Oktober 2005 11:36 schrieben Sie:

Hi Stefan,

 (II) NV(0): Not using mode 1600x1200 (no mode of this name)

This seems to be your problem. Caused by this:

 (II) NV(0): Not using default mode 1600x1200 (hsync out of range)

You should try to create a modeline for 1600x1200 matching your screens 
capabilities. gtf(1) seems to be the way to go for that.

Regards, 
Stephan



Re: Konqueror, Crypto and Https problems

2005-09-25 Thread Stephan Tesch
Am Sonntag, 25. September 2005 04:40 schrieben Sie:

Hi Chris,

 An error occurred while loading
 https://webauth.comcast.net/auth/login?url=http%253A%252F%252Fwww.comcast.n
et%252Fqry%252Fgoto%253Fapp%253Dmail%2526CM.src%253Dtop:

 The process for the https://webauth.comcast.net protocol died unexpectedly.

Nope, I cannot confirm this. Works for me.

 At first, I thought it was simply a konqueror icompatability with the
 specific website, but I soon found out this happened on all https
 sites.  After poking around, I went to settings:configure konqueror,
 then I clicked on Crypto.  When I did that, the konqueror configurator
 (or whatever you call the window that let's you configure konqueror)
 crashed out entirely -- no errors.

That works, too.

 Interestingly enough, when I run Konqueror as root, this does not
 happen.  Therefore, somehow, this must be a permissions error -- but
 since there is no error output, I have no idea where to look.

Yep, try to raise your ulimits. KDE is kind of resource hungry. I run it with 
an account that's in the staff login class. You might want to try that. It 
would also be nice, if you tell us, which version of OpenBSD and KDE you are 
using.

Stephan



Re: startkde question

2005-08-23 Thread Stephan Tesch
Am Dienstag, 23. August 2005 15:48 schrieb Dave Feustel:
 When I start kde via startkde after login, an instance of
 xconsole isalso started. This instance doesn't seem to be
 started in kdeinit. Where is it started from?

Is is mentioned in your ~/.xinitrc file?

Regards, Stephan



Re: audio plays too fast

2005-08-19 Thread Stephan Tesch
Am Freitag, 19. August 2005 13:59 schrieben Sie:

 I agree .It seems the developers are not interested (fair enough, obsd
 wasnt designed for multimedia) . Read the reply.

 Yes some apps dont allow resampling. As I said mplayer is very good
 for this, but it cannot substitute xmms (which does not resample).

Well, you could use the arts output plugin and tell arts to resample.

Regards, Stephan



Re: generel software RAID-Question (IBMx330, raid failed, where to look for errors? )

2005-08-03 Thread Stephan Tesch
Am Mittwoch, 3. August 2005 02:11 schrieben Sie:

Hi Sebastian,

 Are there any problems known with the raidframe-device?

Not that I know of.

 In my case: I've a IBM X330 with dual P3 800Mhz and 2 SCSI-HDDs.
 One is about 160Gb and the other is smaler. I created a raid for the /home
 but today the server stoped working. I've just remote acces so the
 tecnican (a guy I know) told me the server wont boot up and stops during
 raid-initialisation.

Did it really stop, or was it just rebuilding the array after an unclean 
shutdown? Did he try abort that operation (ctrl-c)?

 I ask because RAIDframe isn't in the default-Kernel so I'm not sure if
 it's a good choice for productiv servers. I would be happy if somebody
 with much more experience would give me some hints where to look for
 potential errors.

I've got RAIDframe running for a couple of months now on my web/mailserver on 
sparc64, and it is rock solid. Never had a problem with it so far.

A better description what really happens when you boot the server would be 
nice. E.g. what messages do you see on the console, is there any activity on 
the hdd's, does the server pass the BIOS tests, etc.

Regards,
Stephan



Re: Network interface (bge) always down after reboot

2005-07-30 Thread Stephan Tesch
Am Samstag, 30. Juli 2005 23:43 schrieb Tom Mack:

 I just installed 3.7 on a Dell Precision 370. During the install, I
 was unable to get an IP address from DHCP, but I ignored it. When I
 rebooted, I noticed that the ifconfig bge0 reported status: no
 carrier. I knew it had worked fine 30 minutes ago when the computer
 was running Windows and I hadn't touched the cable. For the hell of
 it, I typed ifconfig bge0 up and it went active. Then I did a
 dhclient bge0 and got an IP address. However, after rebooting, the
 interface was no carrier again (and the same procedure would make it
 go up again). I've tried specifying the media and mediaopt in
 hostname.bge0 file to no avail.

 Anyone know how to fix this?

Does it work if you put

dhcp up

into /etc/hostname.bge0 ?

So long,
Stephan



Re: amdpm in GENERIC

2005-07-29 Thread Stephan Tesch
Am Freitag, 29. Juli 2005 10:48 schrieben Sie:

Hi Art,

 There is an infinite amount of things you might decide to enable, disable,
 do, not do, ignore, examie, etc.

 What particular reason do you have to be interested in this driver? What
 problem are you trying to solve?

Originally I was trying to find a way to cool my cpu4s and monitor the 
temperature of board and proc. AMD power management sounded nice, but 
according to the manpage it doesn4t do what I was hoping it to do. 

(Unfortunately Tyan decided to place the Winbond monitoring IC behind an I2C 
bus, whose controller is - as far as I know - not (yet) supported by OBSD)

Anyway, since I have the hardware and the driver is there, too, why not use 
it? Since I haven4t found any warnings or stability issues regarding this 
driver, I thought: ask misc@, they4ll tell you whether it4s safe or not to 
use.

Regards,
Stephan

PS: you don4t have to CC me, I read the list



amdpm in GENERIC

2005-07-28 Thread Stephan Tesch
Hi guys,

I was just wondering why amdpm isnt included in GENERIC. Are there any issues 
one should be aware of? Or is it just that noone uses it at all?

Thanks,
Stephan



Re: amdpm in GENERIC

2005-07-28 Thread Stephan Tesch
Am Donnerstag, 28. Juli 2005 23:43 schrieben Sie:

Hi Art,

  I was just wondering why amdpm isnt included in GENERIC. Are there any
  issues one should be aware of? Or is it just that noone uses it at all?

 Why should it be?

You might have guessed this, but for people with appropriate hardware to use 
it. It is disabled by default, so I guess it is either unstable or there are 
not enough people which use it. 

I just wanted to check, what the implications would be if I enabled the 
driver. (And yes, I know the StayWithGENERIC clause.)

Regards,
Stephan



Re: starting kde on boot

2005-07-21 Thread Stephan Tesch
Am Donnerstag, 21. Juli 2005 17:44 schrieben Sie:

Hi,

Since you are using KDE, did you run genkdmconf to create the kdm 
configuration files (eg. /usr/local/share/config/kdm/Xsession)?

HTH,
Stephan

 Folk,

 This one has me scratching my head:

 I can boot into kdm, login as a regular user and have a stock X working.
 I can type startx once I'm logged in and have kde up, but with no
 mouse functionality.
 The relevant section of /etc/rc.local reads thus:
 #based on a solution posted by S.Marley

   echo -n ' kdm'; (sleep 5; /usr/local/bin/kdm  ${kdm_flags}) 

 Kdm_flags is set in rc.local.conf

 I have a .xsession file in ~ that has this line

   exec startx

 I have also tried startkde instead of startx in .xsession, but I cannot
 get kde to come up once I'm logged in.
 /etc/X11/xdm/xsession has been edited.

 Any clues? something I've missed?

 TIA