Re: Microphone on Thinkpad X1 carbon 7th Gen
On 05/12/2023 10:11, Stefan Hagen wrote: Corl3ss wrote (2023-12-05 09:18 CET): On 04/12/2023 23:12, Carsten Reith wrote: Corl3ss writes: Hi everyone, Everything but the microphone is working well on my Thinkpad X1 carbon 7th Gen (20QD). I have reviewed [1] and [2] without solution. Below some useful data. Have you enabled the appropriate sysctl ? (see: https://www.openbsd.org/faq/faq13.html#recordaudio) # sysctl kern.audio.record=1 # echo kern.audio.record=1 >> /etc/sysctl.conf Thanks Carsten for your answer ! Yes, sure (and sorry I did not mention that on my first message). Here is a list of platforms who's microphones won't work on OpenBSD: https://thesofproject.github.io/latest/platforms/index.html#supported-platforms Microphones in many modern Laptops don't work. Thanks to intel smart sound technology (Intel SST), microphones now need a firmware (https://github.com/thesofproject/sof) and nobody has written a driver for OpenBSD yet. You can use a headset on the headset port and the microphone there should work. It's only the builtin mic that won't do anything (even though all toggles in mixerctl / sndioctl appear operational). Fun part reg SOF: it doesn't build with clang, see FAQ: https://thesofproject.github.io/latest/introduction/index.html So - I don't think we'll see mic support for these platforms anytime soon. Best Regards, Stefan Thanks a lot for your precise answer Stefan. Very kind of you. It does not seems to work neither with the headset port but will give it another try :) Thanks again ! Have a nice day Stefan, have a nice day all ! Corl3ss
Re: Microphone on Thinkpad X1 carbon 7th Gen
Corl3ss wrote (2023-12-05 09:18 CET): > > > On 04/12/2023 23:12, Carsten Reith wrote: > > Corl3ss writes: > > > > > Hi everyone, > > > > > > > > > Everything but the microphone is working well on my Thinkpad X1 carbon > > > 7th Gen > > > (20QD). > > > > > > I have reviewed [1] and [2] without solution. > > > Below some useful data. > > > > > > Have you enabled the appropriate sysctl ? (see: > > https://www.openbsd.org/faq/faq13.html#recordaudio) > > > > # sysctl kern.audio.record=1 > > # echo kern.audio.record=1 >> /etc/sysctl.conf > > > Thanks Carsten for your answer ! > > Yes, sure (and sorry I did not mention that on my first message). Here is a list of platforms who's microphones won't work on OpenBSD: https://thesofproject.github.io/latest/platforms/index.html#supported-platforms Microphones in many modern Laptops don't work. Thanks to intel smart sound technology (Intel SST), microphones now need a firmware (https://github.com/thesofproject/sof) and nobody has written a driver for OpenBSD yet. You can use a headset on the headset port and the microphone there should work. It's only the builtin mic that won't do anything (even though all toggles in mixerctl / sndioctl appear operational). Fun part reg SOF: it doesn't build with clang, see FAQ: https://thesofproject.github.io/latest/introduction/index.html So - I don't think we'll see mic support for these platforms anytime soon. Best Regards, Stefan
Re: Microphone on Thinkpad X1 carbon 7th Gen
On 04/12/2023 23:12, Carsten Reith wrote: Corl3ss writes: Hi everyone, Everything but the microphone is working well on my Thinkpad X1 carbon 7th Gen (20QD). I have reviewed [1] and [2] without solution. Below some useful data. Have you enabled the appropriate sysctl ? (see: https://www.openbsd.org/faq/faq13.html#recordaudio) # sysctl kern.audio.record=1 # echo kern.audio.record=1 >> /etc/sysctl.conf Thanks Carsten for your answer ! Yes, sure (and sorry I did not mention that on my first message). Corl3ss
Re: Microphone on Thinkpad X1 carbon 7th Gen
Corl3ss writes: > Hi everyone, > > > Everything but the microphone is working well on my Thinkpad X1 carbon 7th Gen > (20QD). > > I have reviewed [1] and [2] without solution. > Below some useful data. > > Do you have any solution or tips ? Did I missed something ? or is it just not > supported ? > > Thanks in advance for your help !! > > Grateful to the OpenBSD community :) > > > Corl3ss > > > [1] https://cdn.openbsd.org/pub/OpenBSD/7.4/amd64/install74.img > [2] https://jcs.org/2019/08/14/x1c7#openbsd-support-log > > == > # mixerctl > inputs.dac-2:3=112,112 > inputs.dac-0:1=112,112 > record.adc-0:1_mute=off > record.adc-0:1=252,252 > record.adc-2:3_mute=off > record.adc-2:3=252,252 > outputs.spkr_source=dac-2:3 > outputs.spkr_mute=off > outputs.spkr_eapd=on > outputs.spkr2_source=dac-0:1 > outputs.spkr2_mute=off > outputs.spkr2_boost=off > inputs.mic=85,85 > outputs.mic_dir=input-vr80 > outputs.hp_source=dac-0:1 > outputs.hp_mute=off > outputs.hp_boost=off > outputs.hp_eapd=on > record.adc-2:3_source=mic > record.adc-0:1_source=mic > outputs.mic_sense=unplugged > outputs.hp_sense=unplugged > outputs.spkr_muters=hp > outputs.master=112,112 > outputs.master.mute=off > outputs.master.slaves=dac-2:3,dac-0:1,spkr,spkr2,hp > record.volume=255,255 > record.volume.mute=off > record.volume.slaves=adc-0:1,adc-2:3 > record.enable=sysctl > > > = > /var/log/messages extract: > azalia0 at pci0 dev 31 function 3 "Intel 300 Series HD Audio" rev 0x11: msi > azalia0: codecs: Realtek ALC285, Intel/0x280b, using Realtek ALC285 > audio0 at azalia0 > > == > # pcidump -v (extract of audio items only) > 0:31:3: Intel 100 Series HD Audio > 0x: Vendor ID: 8086, Product ID: 9d70 > 0x0004: Command: 0106, Status: 0010 > 0x0008: Class: 04 Multimedia, Subclass: 03 HD Audio, > Interface: 00, Revision: 21 > 0x000c: BIST: 00, Header Type: 00, Latency Timer: 20, > Cache Line Size: 00 > 0x0010: BAR mem 64bit addr: 0xef22/0x4000 > 0x0018: BAR empty () > 0x001c: BAR empty () > 0x0020: BAR mem 64bit addr: 0xef20/0x0001 > 0x0028: Cardbus CIS: > 0x002c: Subsystem Vendor ID: 103c Product ID: 8184 > 0x0030: Expansion ROM Base Address: > 0x0038: > 0x003c: Interrupt Pin: 01 Line: 0b Min Gnt: 00 Max Lat: 00 > 0x0050: Capability 0x01: Power Management > State: D0 > 0x0060: Capability 0x05: Message Signalled Interrupts (MSI) > Enabled: yes > [...] > 0:31:3: Intel 300 Series HD Audio > 0x: Vendor ID: 8086, Product ID: 9dc8 > 0x0004: Command: 0006, Status: 0010 > 0x0008: Class: 04 Multimedia, Subclass: 03 HD Audio, > Interface: 80, Revision: 11 > 0x000c: BIST: 00, Header Type: 00, Latency Timer: 00, > Cache Line Size: 00 > 0x0010: BAR mem 64bit addr: 0xea23c000/0x4000 > 0x0018: BAR empty () > 0x001c: BAR empty () > 0x0020: BAR mem 64bit addr: 0xea00/0x0010 > 0x0028: Cardbus CIS: > 0x002c: Subsystem Vendor ID: 17aa Product ID: 2292 > 0x0030: Expansion ROM Base Address: > 0x0038: > 0x003c: Interrupt Pin: 01 Line: ff Min Gnt: 00 Max Lat: 00 > 0x0050: Capability 0x01: Power Management > State: D0 > 0x0080: Capability 0x09: Vendor Specific > 0x0060: Capability 0x05: Message Signalled Interrupts (MSI) > Enabled: yes Have you enabled the appropriate sysctl ? (see: https://www.openbsd.org/faq/faq13.html#recordaudio) # sysctl kern.audio.record=1 # echo kern.audio.record=1 >> /etc/sysctl.conf Cheers, Carsten
Microphone on Thinkpad X1 carbon 7th Gen
Hi everyone, Everything but the microphone is working well on my Thinkpad X1 carbon 7th Gen (20QD). I have reviewed [1] and [2] without solution. Below some useful data. Do you have any solution or tips ? Did I missed something ? or is it just not supported ? Thanks in advance for your help !! Grateful to the OpenBSD community :) Corl3ss [1] https://cdn.openbsd.org/pub/OpenBSD/7.4/amd64/install74.img [2] https://jcs.org/2019/08/14/x1c7#openbsd-support-log == # mixerctl inputs.dac-2:3=112,112 inputs.dac-0:1=112,112 record.adc-0:1_mute=off record.adc-0:1=252,252 record.adc-2:3_mute=off record.adc-2:3=252,252 outputs.spkr_source=dac-2:3 outputs.spkr_mute=off outputs.spkr_eapd=on outputs.spkr2_source=dac-0:1 outputs.spkr2_mute=off outputs.spkr2_boost=off inputs.mic=85,85 outputs.mic_dir=input-vr80 outputs.hp_source=dac-0:1 outputs.hp_mute=off outputs.hp_boost=off outputs.hp_eapd=on record.adc-2:3_source=mic record.adc-0:1_source=mic outputs.mic_sense=unplugged outputs.hp_sense=unplugged outputs.spkr_muters=hp outputs.master=112,112 outputs.master.mute=off outputs.master.slaves=dac-2:3,dac-0:1,spkr,spkr2,hp record.volume=255,255 record.volume.mute=off record.volume.slaves=adc-0:1,adc-2:3 record.enable=sysctl = /var/log/messages extract: azalia0 at pci0 dev 31 function 3 "Intel 300 Series HD Audio" rev 0x11: msi azalia0: codecs: Realtek ALC285, Intel/0x280b, using Realtek ALC285 audio0 at azalia0 == # pcidump -v (extract of audio items only) 0:31:3: Intel 100 Series HD Audio 0x: Vendor ID: 8086, Product ID: 9d70 0x0004: Command: 0106, Status: 0010 0x0008: Class: 04 Multimedia, Subclass: 03 HD Audio, Interface: 00, Revision: 21 0x000c: BIST: 00, Header Type: 00, Latency Timer: 20, Cache Line Size: 00 0x0010: BAR mem 64bit addr: 0xef22/0x4000 0x0018: BAR empty () 0x001c: BAR empty () 0x0020: BAR mem 64bit addr: 0xef20/0x0001 0x0028: Cardbus CIS: 0x002c: Subsystem Vendor ID: 103c Product ID: 8184 0x0030: Expansion ROM Base Address: 0x0038: 0x003c: Interrupt Pin: 01 Line: 0b Min Gnt: 00 Max Lat: 00 0x0050: Capability 0x01: Power Management State: D0 0x0060: Capability 0x05: Message Signalled Interrupts (MSI) Enabled: yes [...] 0:31:3: Intel 300 Series HD Audio 0x: Vendor ID: 8086, Product ID: 9dc8 0x0004: Command: 0006, Status: 0010 0x0008: Class: 04 Multimedia, Subclass: 03 HD Audio, Interface: 80, Revision: 11 0x000c: BIST: 00, Header Type: 00, Latency Timer: 00, Cache Line Size: 00 0x0010: BAR mem 64bit addr: 0xea23c000/0x4000 0x0018: BAR empty () 0x001c: BAR empty () 0x0020: BAR mem 64bit addr: 0xea00/0x0010 0x0028: Cardbus CIS: 0x002c: Subsystem Vendor ID: 17aa Product ID: 2292 0x0030: Expansion ROM Base Address: 0x0038: 0x003c: Interrupt Pin: 01 Line: ff Min Gnt: 00 Max Lat: 00 0x0050: Capability 0x01: Power Management State: D0 0x0080: Capability 0x09: Vendor Specific 0x0060: Capability 0x05: Message Signalled Interrupts (MSI) Enabled: yes
Re: Internal Microphone on Thinkpad X1 Carbon 7th gen not working
Alexandre Ratchov wrote: > On Thu, Dec 10, 2020 at 10:30:56AM +0100, Anders Damsgaard wrote: >> * Stefan Hagen [2020-12-10 10:14:35 +0100]: >>> Bodie wrote: On 9.12.2020 20:43, Stefan Hagen wrote: > Hello Zachary, > > Zachary Campbell wrote: >> Any luck with this? I am also struggling to get the internal >> mic to work on the X1 Carbon 7th Gen. Have gone through >> everything discussed here, but still no luck. >> >> My dmesg and mixerctl match those already shared in thread. >> Happy to share anything else that might be helpful, but after >> reading through the multimedia FAQ and this thread I am >> not quite sure where to go next. > > No progress here. > > I think all needed information is in here. > https://bbs.archlinux.org/viewtopic.php?id=249900 That part on SST remind me my problem with audio on T590 under Windows. For at least two patch builds Windows had issue to picking up wrong driver for audio. Instead of regular HD Audio they were setting up SST HD Audio and then output/input were not working. So maybe it is something wrong inside that HW like reporting wrong capabilities? >>> >>> Not unlikely as "microphone not working on x1 carbon gen 7" complaints >>> are all over the place. The solution for ms windows is upgrade + use >>> newest drivers. So yes, I assume there's something off that has been >>> fixed in software. >>> >>> I've seen similar complaints about Dell Laptops that are also using >>> the Realtek ALC285 chip. >>> >>> If it's just this one chip, then fine, let's ignore it. >>> >>> Can someone with a X1 Carbon Gen 8 report it working? >> >> The same issue persists on 8th generation, also reported to dmesg@. >> >> azalia0 at pci0 dev 31 function 3 "Intel 400 Series HD Audio" rev 0x00: msi >> azalia0: codecs: Realtek ALC285, Intel/0x280b, using Realtek ALC285 >> audio0 at azalia0 >> >> Also, the mic is enabled in BIOS and kern.audio.record=1. > > AFAIU, all audio components but the internal microphone are connected > to the "Realtek ALC285" codec which is handled by azalia(4). The > internal microphone uses the Intel Smart Sound Technology, which needs > a dedicated driver. ^^ Right! That's how it shows up on windows. I think it's *not* worth to create a driver for the internal microphone. It's really not that useful most of the time. But it's good to know that it's not just configuration that's missing. So I can stop fiddling and accept that it does not work. Thanks, Stefan
Re: Internal Microphone on Thinkpad X1 Carbon 7th gen not working
On Thu, Dec 10, 2020 at 10:30:56AM +0100, Anders Damsgaard wrote: > * Stefan Hagen [2020-12-10 10:14:35 +0100]: > > > Bodie wrote: > > > > > > > > > On 9.12.2020 20:43, Stefan Hagen wrote: > > > > Hello Zachary, > > > > > > > > Zachary Campbell wrote: > > > > > Any luck with this? I am also struggling to get the internal > > > > > mic to work on the X1 Carbon 7th Gen. Have gone through > > > > > everything discussed here, but still no luck. > > > > > > > > > > My dmesg and mixerctl match those already shared in thread. > > > > > Happy to share anything else that might be helpful, but after > > > > > reading through the multimedia FAQ and this thread I am > > > > > not quite sure where to go next. > > > > > > > > No progress here. > > > > > > > > I think all needed information is in here. > > > > https://bbs.archlinux.org/viewtopic.php?id=249900 > > > > > > > > > > That part on SST remind me my problem with audio on T590 under Windows. > > > For at least two patch builds Windows had issue to picking up wrong > > > driver for audio. Instead of regular HD Audio they were setting > > > up SST HD Audio and then output/input were not working. > > > > > > So maybe it is something wrong inside that HW like reporting wrong > > > capabilities? > > > > Not unlikely as "microphone not working on x1 carbon gen 7" complaints > > are all over the place. The solution for ms windows is upgrade + use > > newest drivers. So yes, I assume there's something off that has been > > fixed in software. > > > > I've seen similar complaints about Dell Laptops that are also using > > the Realtek ALC285 chip. > > > > If it's just this one chip, then fine, let's ignore it. > > > > Can someone with a X1 Carbon Gen 8 report it working? > > > > Best Regards, > > Stefan > > > > The same issue persists on 8th generation, also reported to dmesg@. > > azalia0 at pci0 dev 31 function 3 "Intel 400 Series HD Audio" rev 0x00: msi > azalia0: codecs: Realtek ALC285, Intel/0x280b, using Realtek ALC285 > audio0 at azalia0 > > Also, the mic is enabled in BIOS and kern.audio.record=1. > AFAIU, all audio components but the internal microphone are connected to the "Realtek ALC285" codec which is handled by azalia(4). The internal microphone uses the Intel Smart Sound Technology, which needs a dedicated driver. Linux has a driver written by Intel employees, which is around twice as big as azalia. It's unclear how difficult it would be to write a openbsd-ish driver that simply makes the hardware work. Sorry. Meanwhile, if this is for voice calls, I'd suggest either using a phone headset (the x1 probably has a trrs jack) or a comfortable full-duplex usb headset; most work way better than the internal mics/speakers.
Re: Internal Microphone on Thinkpad X1 Carbon 7th gen not working
* Stefan Hagen [2020-12-10 10:14:35 +0100]: Bodie wrote: On 9.12.2020 20:43, Stefan Hagen wrote: Hello Zachary, Zachary Campbell wrote: Any luck with this? I am also struggling to get the internal mic to work on the X1 Carbon 7th Gen. Have gone through everything discussed here, but still no luck. My dmesg and mixerctl match those already shared in thread. Happy to share anything else that might be helpful, but after reading through the multimedia FAQ and this thread I am not quite sure where to go next. No progress here. I think all needed information is in here. https://bbs.archlinux.org/viewtopic.php?id=249900 That part on SST remind me my problem with audio on T590 under Windows. For at least two patch builds Windows had issue to picking up wrong driver for audio. Instead of regular HD Audio they were setting up SST HD Audio and then output/input were not working. So maybe it is something wrong inside that HW like reporting wrong capabilities? Not unlikely as "microphone not working on x1 carbon gen 7" complaints are all over the place. The solution for ms windows is upgrade + use newest drivers. So yes, I assume there's something off that has been fixed in software. I've seen similar complaints about Dell Laptops that are also using the Realtek ALC285 chip. If it's just this one chip, then fine, let's ignore it. Can someone with a X1 Carbon Gen 8 report it working? Best Regards, Stefan The same issue persists on 8th generation, also reported to dmesg@. azalia0 at pci0 dev 31 function 3 "Intel 400 Series HD Audio" rev 0x00: msi azalia0: codecs: Realtek ALC285, Intel/0x280b, using Realtek ALC285 audio0 at azalia0 Also, the mic is enabled in BIOS and kern.audio.record=1. Cheers, Anders
Re: Internal Microphone on Thinkpad X1 Carbon 7th gen not working
Bodie wrote: > > > On 9.12.2020 20:43, Stefan Hagen wrote: >> Hello Zachary, >> >> Zachary Campbell wrote: >>> Any luck with this? I am also struggling to get the internal >>> mic to work on the X1 Carbon 7th Gen. Have gone through >>> everything discussed here, but still no luck. >>> >>> My dmesg and mixerctl match those already shared in thread. >>> Happy to share anything else that might be helpful, but after >>> reading through the multimedia FAQ and this thread I am >>> not quite sure where to go next. >> >> No progress here. >> >> I think all needed information is in here. >> https://bbs.archlinux.org/viewtopic.php?id=249900 >> > > That part on SST remind me my problem with audio on T590 under Windows. > For at least two patch builds Windows had issue to picking up wrong > driver for audio. Instead of regular HD Audio they were setting > up SST HD Audio and then output/input were not working. > > So maybe it is something wrong inside that HW like reporting wrong > capabilities? Not unlikely as "microphone not working on x1 carbon gen 7" complaints are all over the place. The solution for ms windows is upgrade + use newest drivers. So yes, I assume there's something off that has been fixed in software. I've seen similar complaints about Dell Laptops that are also using the Realtek ALC285 chip. If it's just this one chip, then fine, let's ignore it. Can someone with a X1 Carbon Gen 8 report it working? Best Regards, Stefan
Re: Internal Microphone on Thinkpad X1 Carbon 7th gen not working
On 9.12.2020 20:43, Stefan Hagen wrote: Hello Zachary, Zachary Campbell wrote: Any luck with this? I am also struggling to get the internal mic to work on the X1 Carbon 7th Gen. Have gone through everything discussed here, but still no luck. My dmesg and mixerctl match those already shared in thread. Happy to share anything else that might be helpful, but after reading through the multimedia FAQ and this thread I am not quite sure where to go next. No progress here. I think all needed information is in here. https://bbs.archlinux.org/viewtopic.php?id=249900 That part on SST remind me my problem with audio on T590 under Windows. For at least two patch builds Windows had issue to picking up wrong driver for audio. Instead of regular HD Audio they were setting up SST HD Audio and then output/input were not working. So maybe it is something wrong inside that HW like reporting wrong capabilities? Seems to be something for an azalia developer. Best Regards, Stefan
Re: Internal Microphone on Thinkpad X1 Carbon 7th gen not working
Hello Zachary, Zachary Campbell wrote: > Any luck with this? I am also struggling to get the internal > mic to work on the X1 Carbon 7th Gen. Have gone through > everything discussed here, but still no luck. > > My dmesg and mixerctl match those already shared in thread. > Happy to share anything else that might be helpful, but after > reading through the multimedia FAQ and this thread I am > not quite sure where to go next. No progress here. I think all needed information is in here. https://bbs.archlinux.org/viewtopic.php?id=249900 Seems to be something for an azalia developer. Best Regards, Stefan
Re: Internal Microphone on Thinkpad X1 Carbon 7th gen not working
Hello,
Any luck with this? I am also struggling to get the internal
mic to work on the X1 Carbon 7th Gen. Have gone through
everything discussed here, but still no luck.
My dmesg and mixerctl match those already shared in thread.
Happy to share anything else that might be helpful, but after
reading through the multimedia FAQ and this thread I am
not quite sure where to go next.
Best,
Zachary
Stefan Hagen writes:
> Hello,
>
> I'm struggling to get the internal microphone working on my Thinkpad
> X1 Carbon 7th Gen.
>
> I can record from an external USB microphone on OpenBSD. It is only the
> internal microphone I'm struggling with.
>
> To rule out a hardware fault, I booted windows from a USB drive and the
> microphone works fine in this OS. While being there, I also updated the
> bios and thunderbolt firmware to the latest version.
>
> Is anyone here that got it working on this machine?
>
> dmesg:
> azalia0 at pci0 dev 31 function 3 "Intel 300 Series HD Audio" rev 0x11: msi
> azalia0: codecs: Realtek ALC285, Intel/0x280b, using Realtek ALC285
> audio0 at azalia0
>
> $ sysctl kern.audio.record
> kern.audio.record=1
>
> $ mixerctl -v
> inputs.dac-2:3=174,174
> inputs.dac-0:1=174,174
> record.adc-0:1_mute=off [ off on ]
> record.adc-0:1=124,124
> record.adc-2:3_mute=off [ off on ]
> record.adc-2:3=124,124
> outputs.spkr_source=dac-2:3 [ dac-2:3 ]
> outputs.spkr_mute=off [ off on ]
> outputs.spkr_eapd=on [ off on ]
> outputs.spkr2_source=dac-0:1 [ dac-2:3 dac-0:1 ]
> outputs.spkr2_mute=off [ off on ]
> outputs.spkr2_boost=off [ off on ]
> inputs.mic=85,85
> outputs.mic_dir=input-vr80 [ none input input-vr0 input-vr50 input-vr80
> input-vr100 ]
> outputs.hp_source=dac-0:1 [ dac-2:3 dac-0:1 ]
> outputs.hp_mute=off [ off on ]
> outputs.hp_boost=off [ off on ]
> outputs.hp_eapd=on [ off on ]
> record.adc-2:3_source=mic { mic }
> record.adc-0:1_source=mic { mic }
> outputs.mic_sense=unplugged [ unplugged plugged ]
> outputs.hp_sense=unplugged [ unplugged plugged ]
> outputs.spkr_muters=hp { hp }
> outputs.master=255,255
> outputs.master.mute=off [ off on ]
> outputs.master.slaves=dac-2:3,dac-0:1,spkr,spkr2,hp { dac-2:3 dac-0:1 spkr
> spkr2 hp }
> record.volume=124,124
> record.volume.mute=off [ off on ]
> record.volume.slaves=adc-0:1,adc-2:3 { adc-0:1 adc-2:3 mic }
> record.enable=sysctl [ off on sysctl ]
>
> I also cranked inputs.mic and record.volume up to 255,255 - no
> difference.
>
> $ sndiod -ddd -f rsnd/0 -m play,rec # while aucat -o test.wav
> snd0 pst=cfg.default: rec=0:1 play=0:1 vol=23170 dup
> helper(helper|ini): created
> worker(worker|ini): created
> listen(/tmp/sndio/sock0|ini): created
> sock(sock|ini): created
> helper: recv: cmd = 0, num = 0, idx = 0, mode = 3, fd = -1
> helper: send: cmd = 3, num = 0, idx = 0, mode = 0, fd = 3
> helper: recv: cmd = 2, num = 0, idx = 0, mode = 768, fd = -1
> helper: send: cmd = 3, num = 0, idx = 0, mode = 0, fd = 3
> sock,rmsg,widl: AUTH message
> sock,rmsg,widl: HELLO message
> sock,rmsg,widl: hello from , mode = 2, ver 7
> snd0 pst=cfg: device requested
> worker: send: cmd = 0, num = 0, idx = 0, mode = 3, fd = -1
> worker: recv: cmd = 3, num = 0, idx = 0, mode = 0, fd = 6
> snd0 pst=cfg: using rsnd/0
> worker: send: cmd = 2, num = 0, idx = 0, mode = 768, fd = -1
> worker: recv: cmd = 3, num = 0, idx = 0, mode = 0, fd = 7
> sio(dev|ini): created
> sioctl(mix|ini): created
> snd0 pst=cfg: adding output0.level=255 at 25
> snd0 pst=cfg: adding output1.level=255 at 26
> snd0 pst=cfg: adding output0.mute=0 at 57
> snd0 pst=cfg: adding output1.mute=0 at 58
> snd0 pst=cfg: adding input0.level=124 at 89
> snd0 pst=cfg: adding input1.level=124 at 90
> snd0 pst=cfg: adding input0.mute=0 at 121
> snd0 pst=cfg: adding input1.mute=0 at 122
> snd0 pst=cfg: 48000Hz, s16le, play 0:1, rec 0:1, 16 blocks of 480 frames
> snd0 pst=cfg: adding app/aucat0.level=127 at 0
> aucat0 vol=127,pst=ini: using snd0 pst=ini.default, mode = 2
> aucat0 vol=127,pst=ini,rmsg,widl: SETPAR message
> aucat0 vol=127,pst=ini,rmsg,widl: recording channels 0:1 ->0:1
> aucat0 vol=127,pst=ini,rmsg,widl: 48000Hz sample rate, 480 frame blocks
> aucat0 vol=127,pst=ini,rmsg,widl: 9600 frame buffer
> aucat0 vol=127,pst=ini,rmsg,widl: GETPAR message
> aucat0 vol=127,pst=ini,rmsg,widl: GETPAR message
> aucat0 vol=127,pst=ini,rmsg,widl: START message
> aucat0 vol=127,pst=ini: recording s16le <- s16le
> cmap: nch = 2, ostart = 0, onext = 0, istart = 0, inext = 0
> aucat0 vol=127,pst=ini: allocated 9600/17280 fr buffers
> snd0 pst=ini: device started
> snd0 pst=run: started
> aucat0 vol=127,pst=run: attached at -7680, delta = 0
> aucat0 vol=127,pst=run: 48000Hz, s16le, rec 0:1, 20 blocks of 480 frames
> aucat0 vol=127,pst=run,rmsg,widl: building SETVOL message, vol = 127
> aucat0 vol=127,pst=run: prime = 16
> aucat0 vol=127,pst=run: prime = 15
> aucat0 vol=127,pst=run: prime = 14
> aucat0 vol=127,pst=run: prime = 13
> aucat0 vol=127,pst=run: prime = 12
> aucat0 vol=127,pst=run: prime =
Re: Internal Microphone on Thinkpad X1 Carbon 7th gen not working
Michel von Behr wrote: > Check sysctl(8) - kern.audio.record (turned off by default) > Stefan Hagen wrote: > > $ sysctl kern.audio.record > > kern.audio.record=1 Yes, kern.audio.record is enabled. I'm also able to record from USB audio devices. Just the internal one doesn't work. Best Regards, Stefan
Re: Internal Microphone on Thinkpad X1 Carbon 7th gen not working
Tom Smyth wrote: > Hello Stefan, > > have you checked the Bios is it disabled (for Privacy ) / (security) It is enabled in the BIOS. I would assume that if it would be disabled, windows would also not be able to record. Best Regards, Stefan
Re: Internal Microphone on Thinkpad X1 Carbon 7th gen not working
Check sysctl(8) - kern.audio.record (turned off by default)
On Fri, 4 Dec 2020 at 1:41 PM Tom Smyth
wrote:
> Hello Stefan,
>
> have you checked the Bios is it disabled (for Privacy ) / (security)
>
>
>
> On Fri, 4 Dec 2020 at 09:20, Stefan Hagen wrote:
>
> > Hello,
> >
> > I'm struggling to get the internal microphone working on my Thinkpad
> > X1 Carbon 7th Gen.
> >
> > I can record from an external USB microphone on OpenBSD. It is only the
> > internal microphone I'm struggling with.
> >
> > To rule out a hardware fault, I booted windows from a USB drive and the
> > microphone works fine in this OS. While being there, I also updated the
> > bios and thunderbolt firmware to the latest version.
> >
> > Is anyone here that got it working on this machine?
> >
> > dmesg:
> > azalia0 at pci0 dev 31 function 3 "Intel 300 Series HD Audio" rev 0x11:
> msi
> > azalia0: codecs: Realtek ALC285, Intel/0x280b, using Realtek ALC285
> > audio0 at azalia0
> >
> > $ sysctl kern.audio.record
> > kern.audio.record=1
> >
> > $ mixerctl -v
> > inputs.dac-2:3=174,174
> > inputs.dac-0:1=174,174
> > record.adc-0:1_mute=off [ off on ]
> > record.adc-0:1=124,124
> > record.adc-2:3_mute=off [ off on ]
> > record.adc-2:3=124,124
> > outputs.spkr_source=dac-2:3 [ dac-2:3 ]
> > outputs.spkr_mute=off [ off on ]
> > outputs.spkr_eapd=on [ off on ]
> > outputs.spkr2_source=dac-0:1 [ dac-2:3 dac-0:1 ]
> > outputs.spkr2_mute=off [ off on ]
> > outputs.spkr2_boost=off [ off on ]
> > inputs.mic=85,85
> > outputs.mic_dir=input-vr80 [ none input input-vr0 input-vr50 input-vr80
> > input-vr100 ]
> > outputs.hp_source=dac-0:1 [ dac-2:3 dac-0:1 ]
> > outputs.hp_mute=off [ off on ]
> > outputs.hp_boost=off [ off on ]
> > outputs.hp_eapd=on [ off on ]
> > record.adc-2:3_source=mic { mic }
> > record.adc-0:1_source=mic { mic }
> > outputs.mic_sense=unplugged [ unplugged plugged ]
> > outputs.hp_sense=unplugged [ unplugged plugged ]
> > outputs.spkr_muters=hp { hp }
> > outputs.master=255,255
> > outputs.master.mute=off [ off on ]
> > outputs.master.slaves=dac-2:3,dac-0:1,spkr,spkr2,hp { dac-2:3 dac-0:1
> > spkr spkr2 hp }
> > record.volume=124,124
> > record.volume.mute=off [ off on ]
> > record.volume.slaves=adc-0:1,adc-2:3 { adc-0:1 adc-2:3 mic }
> > record.enable=sysctl [ off on sysctl ]
> >
> > I also cranked inputs.mic and record.volume up to 255,255 - no
> > difference.
> >
> > $ sndiod -ddd -f rsnd/0 -m play,rec # while aucat -o test.wav
> > snd0 pst=cfg.default: rec=0:1 play=0:1 vol=23170 dup
> > helper(helper|ini): created
> > worker(worker|ini): created
> > listen(/tmp/sndio/sock0|ini): created
> > sock(sock|ini): created
> > helper: recv: cmd = 0, num = 0, idx = 0, mode = 3, fd = -1
> > helper: send: cmd = 3, num = 0, idx = 0, mode = 0, fd = 3
> > helper: recv: cmd = 2, num = 0, idx = 0, mode = 768, fd = -1
> > helper: send: cmd = 3, num = 0, idx = 0, mode = 0, fd = 3
> > sock,rmsg,widl: AUTH message
> > sock,rmsg,widl: HELLO message
> > sock,rmsg,widl: hello from , mode = 2, ver 7
> > snd0 pst=cfg: device requested
> > worker: send: cmd = 0, num = 0, idx = 0, mode = 3, fd = -1
> > worker: recv: cmd = 3, num = 0, idx = 0, mode = 0, fd = 6
> > snd0 pst=cfg: using rsnd/0
> > worker: send: cmd = 2, num = 0, idx = 0, mode = 768, fd = -1
> > worker: recv: cmd = 3, num = 0, idx = 0, mode = 0, fd = 7
> > sio(dev|ini): created
> > sioctl(mix|ini): created
> > snd0 pst=cfg: adding output0.level=255 at 25
> > snd0 pst=cfg: adding output1.level=255 at 26
> > snd0 pst=cfg: adding output0.mute=0 at 57
> > snd0 pst=cfg: adding output1.mute=0 at 58
> > snd0 pst=cfg: adding input0.level=124 at 89
> > snd0 pst=cfg: adding input1.level=124 at 90
> > snd0 pst=cfg: adding input0.mute=0 at 121
> > snd0 pst=cfg: adding input1.mute=0 at 122
> > snd0 pst=cfg: 48000Hz, s16le, play 0:1, rec 0:1, 16 blocks of 480 frames
> > snd0 pst=cfg: adding app/aucat0.level=127 at 0
> > aucat0 vol=127,pst=ini: using snd0 pst=ini.default, mode = 2
> > aucat0 vol=127,pst=ini,rmsg,widl: SETPAR message
> > aucat0 vol=127,pst=ini,rmsg,widl: recording channels 0:1 ->0:1
> > aucat0 vol=127,pst=ini,rmsg,widl: 48000Hz sample rate, 480 frame blocks
> > aucat0 vol=127,pst=ini,rmsg,widl: 9600 frame buffer
> > aucat0 vol=127,pst=ini,rmsg,widl: GETPAR message
> > aucat0 vol=127,pst=ini,rmsg,widl: GETPAR message
> > aucat0 vol=127,pst=ini,rmsg,widl: START message
> > aucat0 vol=127,pst=ini: recording s16le <- s16le
> > cmap: nch = 2, ostart = 0, onext = 0, istart = 0, inext = 0
> > aucat0 vol=127,pst=ini: allocated 9600/17280 fr buffers
> > snd0 pst=ini: device started
> > snd0 pst=run: started
> > aucat0 vol=127,pst=run: attached at -7680, delta = 0
> > aucat0 vol=127,pst=run: 48000Hz, s16le, rec 0:1, 20 blocks of 480 frames
> > aucat0 vol=127,pst=run,rmsg,widl: building SETVOL message, vol = 127
> > aucat0 vol=127,pst=run: prime = 16
> > aucat0 vol=127,pst=run: prime = 15
> > aucat0 vol=127,pst=run: prime = 14
> > aucat0 vol=127,pst=run: prime = 13
> > aucat0
Re: Internal Microphone on Thinkpad X1 Carbon 7th gen not working
Hello Stefan,
have you checked the Bios is it disabled (for Privacy ) / (security)
On Fri, 4 Dec 2020 at 09:20, Stefan Hagen wrote:
> Hello,
>
> I'm struggling to get the internal microphone working on my Thinkpad
> X1 Carbon 7th Gen.
>
> I can record from an external USB microphone on OpenBSD. It is only the
> internal microphone I'm struggling with.
>
> To rule out a hardware fault, I booted windows from a USB drive and the
> microphone works fine in this OS. While being there, I also updated the
> bios and thunderbolt firmware to the latest version.
>
> Is anyone here that got it working on this machine?
>
> dmesg:
> azalia0 at pci0 dev 31 function 3 "Intel 300 Series HD Audio" rev 0x11: msi
> azalia0: codecs: Realtek ALC285, Intel/0x280b, using Realtek ALC285
> audio0 at azalia0
>
> $ sysctl kern.audio.record
> kern.audio.record=1
>
> $ mixerctl -v
> inputs.dac-2:3=174,174
> inputs.dac-0:1=174,174
> record.adc-0:1_mute=off [ off on ]
> record.adc-0:1=124,124
> record.adc-2:3_mute=off [ off on ]
> record.adc-2:3=124,124
> outputs.spkr_source=dac-2:3 [ dac-2:3 ]
> outputs.spkr_mute=off [ off on ]
> outputs.spkr_eapd=on [ off on ]
> outputs.spkr2_source=dac-0:1 [ dac-2:3 dac-0:1 ]
> outputs.spkr2_mute=off [ off on ]
> outputs.spkr2_boost=off [ off on ]
> inputs.mic=85,85
> outputs.mic_dir=input-vr80 [ none input input-vr0 input-vr50 input-vr80
> input-vr100 ]
> outputs.hp_source=dac-0:1 [ dac-2:3 dac-0:1 ]
> outputs.hp_mute=off [ off on ]
> outputs.hp_boost=off [ off on ]
> outputs.hp_eapd=on [ off on ]
> record.adc-2:3_source=mic { mic }
> record.adc-0:1_source=mic { mic }
> outputs.mic_sense=unplugged [ unplugged plugged ]
> outputs.hp_sense=unplugged [ unplugged plugged ]
> outputs.spkr_muters=hp { hp }
> outputs.master=255,255
> outputs.master.mute=off [ off on ]
> outputs.master.slaves=dac-2:3,dac-0:1,spkr,spkr2,hp { dac-2:3 dac-0:1
> spkr spkr2 hp }
> record.volume=124,124
> record.volume.mute=off [ off on ]
> record.volume.slaves=adc-0:1,adc-2:3 { adc-0:1 adc-2:3 mic }
> record.enable=sysctl [ off on sysctl ]
>
> I also cranked inputs.mic and record.volume up to 255,255 - no
> difference.
>
> $ sndiod -ddd -f rsnd/0 -m play,rec # while aucat -o test.wav
> snd0 pst=cfg.default: rec=0:1 play=0:1 vol=23170 dup
> helper(helper|ini): created
> worker(worker|ini): created
> listen(/tmp/sndio/sock0|ini): created
> sock(sock|ini): created
> helper: recv: cmd = 0, num = 0, idx = 0, mode = 3, fd = -1
> helper: send: cmd = 3, num = 0, idx = 0, mode = 0, fd = 3
> helper: recv: cmd = 2, num = 0, idx = 0, mode = 768, fd = -1
> helper: send: cmd = 3, num = 0, idx = 0, mode = 0, fd = 3
> sock,rmsg,widl: AUTH message
> sock,rmsg,widl: HELLO message
> sock,rmsg,widl: hello from , mode = 2, ver 7
> snd0 pst=cfg: device requested
> worker: send: cmd = 0, num = 0, idx = 0, mode = 3, fd = -1
> worker: recv: cmd = 3, num = 0, idx = 0, mode = 0, fd = 6
> snd0 pst=cfg: using rsnd/0
> worker: send: cmd = 2, num = 0, idx = 0, mode = 768, fd = -1
> worker: recv: cmd = 3, num = 0, idx = 0, mode = 0, fd = 7
> sio(dev|ini): created
> sioctl(mix|ini): created
> snd0 pst=cfg: adding output0.level=255 at 25
> snd0 pst=cfg: adding output1.level=255 at 26
> snd0 pst=cfg: adding output0.mute=0 at 57
> snd0 pst=cfg: adding output1.mute=0 at 58
> snd0 pst=cfg: adding input0.level=124 at 89
> snd0 pst=cfg: adding input1.level=124 at 90
> snd0 pst=cfg: adding input0.mute=0 at 121
> snd0 pst=cfg: adding input1.mute=0 at 122
> snd0 pst=cfg: 48000Hz, s16le, play 0:1, rec 0:1, 16 blocks of 480 frames
> snd0 pst=cfg: adding app/aucat0.level=127 at 0
> aucat0 vol=127,pst=ini: using snd0 pst=ini.default, mode = 2
> aucat0 vol=127,pst=ini,rmsg,widl: SETPAR message
> aucat0 vol=127,pst=ini,rmsg,widl: recording channels 0:1 ->0:1
> aucat0 vol=127,pst=ini,rmsg,widl: 48000Hz sample rate, 480 frame blocks
> aucat0 vol=127,pst=ini,rmsg,widl: 9600 frame buffer
> aucat0 vol=127,pst=ini,rmsg,widl: GETPAR message
> aucat0 vol=127,pst=ini,rmsg,widl: GETPAR message
> aucat0 vol=127,pst=ini,rmsg,widl: START message
> aucat0 vol=127,pst=ini: recording s16le <- s16le
> cmap: nch = 2, ostart = 0, onext = 0, istart = 0, inext = 0
> aucat0 vol=127,pst=ini: allocated 9600/17280 fr buffers
> snd0 pst=ini: device started
> snd0 pst=run: started
> aucat0 vol=127,pst=run: attached at -7680, delta = 0
> aucat0 vol=127,pst=run: 48000Hz, s16le, rec 0:1, 20 blocks of 480 frames
> aucat0 vol=127,pst=run,rmsg,widl: building SETVOL message, vol = 127
> aucat0 vol=127,pst=run: prime = 16
> aucat0 vol=127,pst=run: prime = 15
> aucat0 vol=127,pst=run: prime = 14
> aucat0 vol=127,pst=run: prime = 13
> aucat0 vol=127,pst=run: prime = 12
> aucat0 vol=127,pst=run: prime = 11
> aucat0 vol=127,pst=run: prime = 10
> aucat0 vol=127,pst=run: prime = 9
> aucat0 vol=127,pst=run: prime = 8
> aucat0 vol=127,pst=run: prime = 7
> aucat0 vol=127,pst=run: prime = 6
> aucat0 vol=127,pst=run: prime = 5
> aucat0 vol=127,pst=run: prime = 4
> aucat0 vol=127,pst=run:
Internal Microphone on Thinkpad X1 Carbon 7th gen not working
Hello,
I'm struggling to get the internal microphone working on my Thinkpad
X1 Carbon 7th Gen.
I can record from an external USB microphone on OpenBSD. It is only the
internal microphone I'm struggling with.
To rule out a hardware fault, I booted windows from a USB drive and the
microphone works fine in this OS. While being there, I also updated the
bios and thunderbolt firmware to the latest version.
Is anyone here that got it working on this machine?
dmesg:
azalia0 at pci0 dev 31 function 3 "Intel 300 Series HD Audio" rev 0x11: msi
azalia0: codecs: Realtek ALC285, Intel/0x280b, using Realtek ALC285
audio0 at azalia0
$ sysctl kern.audio.record
kern.audio.record=1
$ mixerctl -v
inputs.dac-2:3=174,174
inputs.dac-0:1=174,174
record.adc-0:1_mute=off [ off on ]
record.adc-0:1=124,124
record.adc-2:3_mute=off [ off on ]
record.adc-2:3=124,124
outputs.spkr_source=dac-2:3 [ dac-2:3 ]
outputs.spkr_mute=off [ off on ]
outputs.spkr_eapd=on [ off on ]
outputs.spkr2_source=dac-0:1 [ dac-2:3 dac-0:1 ]
outputs.spkr2_mute=off [ off on ]
outputs.spkr2_boost=off [ off on ]
inputs.mic=85,85
outputs.mic_dir=input-vr80 [ none input input-vr0 input-vr50 input-vr80
input-vr100 ]
outputs.hp_source=dac-0:1 [ dac-2:3 dac-0:1 ]
outputs.hp_mute=off [ off on ]
outputs.hp_boost=off [ off on ]
outputs.hp_eapd=on [ off on ]
record.adc-2:3_source=mic { mic }
record.adc-0:1_source=mic { mic }
outputs.mic_sense=unplugged [ unplugged plugged ]
outputs.hp_sense=unplugged [ unplugged plugged ]
outputs.spkr_muters=hp { hp }
outputs.master=255,255
outputs.master.mute=off [ off on ]
outputs.master.slaves=dac-2:3,dac-0:1,spkr,spkr2,hp { dac-2:3 dac-0:1 spkr
spkr2 hp }
record.volume=124,124
record.volume.mute=off [ off on ]
record.volume.slaves=adc-0:1,adc-2:3 { adc-0:1 adc-2:3 mic }
record.enable=sysctl [ off on sysctl ]
I also cranked inputs.mic and record.volume up to 255,255 - no
difference.
$ sndiod -ddd -f rsnd/0 -m play,rec # while aucat -o test.wav
snd0 pst=cfg.default: rec=0:1 play=0:1 vol=23170 dup
helper(helper|ini): created
worker(worker|ini): created
listen(/tmp/sndio/sock0|ini): created
sock(sock|ini): created
helper: recv: cmd = 0, num = 0, idx = 0, mode = 3, fd = -1
helper: send: cmd = 3, num = 0, idx = 0, mode = 0, fd = 3
helper: recv: cmd = 2, num = 0, idx = 0, mode = 768, fd = -1
helper: send: cmd = 3, num = 0, idx = 0, mode = 0, fd = 3
sock,rmsg,widl: AUTH message
sock,rmsg,widl: HELLO message
sock,rmsg,widl: hello from , mode = 2, ver 7
snd0 pst=cfg: device requested
worker: send: cmd = 0, num = 0, idx = 0, mode = 3, fd = -1
worker: recv: cmd = 3, num = 0, idx = 0, mode = 0, fd = 6
snd0 pst=cfg: using rsnd/0
worker: send: cmd = 2, num = 0, idx = 0, mode = 768, fd = -1
worker: recv: cmd = 3, num = 0, idx = 0, mode = 0, fd = 7
sio(dev|ini): created
sioctl(mix|ini): created
snd0 pst=cfg: adding output0.level=255 at 25
snd0 pst=cfg: adding output1.level=255 at 26
snd0 pst=cfg: adding output0.mute=0 at 57
snd0 pst=cfg: adding output1.mute=0 at 58
snd0 pst=cfg: adding input0.level=124 at 89
snd0 pst=cfg: adding input1.level=124 at 90
snd0 pst=cfg: adding input0.mute=0 at 121
snd0 pst=cfg: adding input1.mute=0 at 122
snd0 pst=cfg: 48000Hz, s16le, play 0:1, rec 0:1, 16 blocks of 480 frames
snd0 pst=cfg: adding app/aucat0.level=127 at 0
aucat0 vol=127,pst=ini: using snd0 pst=ini.default, mode = 2
aucat0 vol=127,pst=ini,rmsg,widl: SETPAR message
aucat0 vol=127,pst=ini,rmsg,widl: recording channels 0:1 ->0:1
aucat0 vol=127,pst=ini,rmsg,widl: 48000Hz sample rate, 480 frame blocks
aucat0 vol=127,pst=ini,rmsg,widl: 9600 frame buffer
aucat0 vol=127,pst=ini,rmsg,widl: GETPAR message
aucat0 vol=127,pst=ini,rmsg,widl: GETPAR message
aucat0 vol=127,pst=ini,rmsg,widl: START message
aucat0 vol=127,pst=ini: recording s16le <- s16le
cmap: nch = 2, ostart = 0, onext = 0, istart = 0, inext = 0
aucat0 vol=127,pst=ini: allocated 9600/17280 fr buffers
snd0 pst=ini: device started
snd0 pst=run: started
aucat0 vol=127,pst=run: attached at -7680, delta = 0
aucat0 vol=127,pst=run: 48000Hz, s16le, rec 0:1, 20 blocks of 480 frames
aucat0 vol=127,pst=run,rmsg,widl: building SETVOL message, vol = 127
aucat0 vol=127,pst=run: prime = 16
aucat0 vol=127,pst=run: prime = 15
aucat0 vol=127,pst=run: prime = 14
aucat0 vol=127,pst=run: prime = 13
aucat0 vol=127,pst=run: prime = 12
aucat0 vol=127,pst=run: prime = 11
aucat0 vol=127,pst=run: prime = 10
aucat0 vol=127,pst=run: prime = 9
aucat0 vol=127,pst=run: prime = 8
aucat0 vol=127,pst=run: prime = 7
aucat0 vol=127,pst=run: prime = 6
aucat0 vol=127,pst=run: prime = 5
aucat0 vol=127,pst=run: prime = 4
aucat0 vol=127,pst=run: prime = 3
aucat0 vol=127,pst=run: prime = 2
aucat0 vol=127,pst=run: prime = 1
aucat0 vol=127,pst=run,rmsg,widl: STOP message
aucat0 vol=127,pst=run: stopping
aucat0 vol=127,pst=run: detaching
aucat0 vol=127,pst=ini,rmsg,widl: stopped
aucat0 vol=127,pst=ini,rmsg,widl: building STOP message
aucat0 vol=127,pst=ini,rmsg,widl: BYE message
aucat0 vol=127,pst=ini,rmsg,widl:
