Re: Mimi UM-740 touchscreen for OpenBSD
Hai, On Wed, Aug 12, 2009 at 8:50 PM, William French wrote: > udl0 at uhub5 port 4 "DisplayLink nanovision MiMo" rev 2.00/0.07 addr 5 > wsdisplay1 at udl0 mux 1 > wsdisplay1: screen 0 added (std, vt100 emulation) So theres 2 things you could do to test this: a) Get a console running on it as a test. Maybe you can make a virtual terminal with wsconsctl/wsconscfg. Look at what wsdisplay0 has configured: wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) So I wonder if you can do the same on wdisplay1? You may need to change /etc/ttys? Does someone know how this is done? b) Get X working, but I have no idea how that would be achieved. Maybe someone else knows? Sorry for being so vague. -- Best Regards Edd Barrett (Freelance software developer / technical writer / open-source developer) http://students.dec.bournemouth.ac.uk/ebarrett
Re: Mimi UM-740 touchscreen for OpenBSD
Hey Guys Sorry for the late reply.. been a crazy week. Yes edd dmesg now looks like this: OpenBSD 4.6-current (GENERIC) #1: Tue Jul 28 23:49:45 BST 2009 r...@toolbox.my.domain:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel(R) Pentium(R) 4 CPU 3.00GHz ("GenuineIntel" 686-class) 3 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR real mem = 2146197504 (2046MB) avail mem = 2066485248 (1970MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 04/05/04, BIOS32 rev. 0 @ 0xf0010, SMBIOS rev. 2.3 @ 0xfbe40 (76 entries) bios0: vendor Intel Corp. version "BF86510A.86A.0058.P15.0404050012" date 04/05/2004 bios0: Intel Corporation D865GLC acpi0 at bios0: rev 0 acpi0: tables DSDT FACP APIC ASF! TCPA WDDT acpi0: wakeup devices TANA(S4) P0P3(S4) AC97(S4) USB0(S4) USB1(S4) USB2(S4) USB3(S4) USB7(S4) UAR1(S4) SLPB(S4) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 199MHz ioapic0 at mainbus0: apid 2 pa 0xfec0, version 20, 24 pins acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 1 (P0P1) acpiprt2 at acpi0: bus 2 (P0P2) acpiprt3 at acpi0: bus 3 (P0P3) acpicpu0 at acpi0 acpipwrres0 at acpi0: URP1 acpipwrres1 at acpi0: FDDP acpipwrres2 at acpi0: LPTP acpibtn0 at acpi0: SLPB bios0: ROM list: 0xc/0xf800 0xcf800/0x1000 0xd0800/0x1000 pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 "Intel 82865G Host" rev 0x02 intelagp0 at pchb0 agp0 at intelagp0: aperture at 0xf800, size 0x400 ppb0 at pci0 dev 1 function 0 "Intel 82865G AGP" rev 0x02 pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 "NVIDIA GeForce FX 5500" rev 0xa1 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) ppb1 at pci0 dev 3 function 0 "Intel 82865G CSA" rev 0x02 pci2 at ppb1 bus 2 em0 at pci2 dev 1 function 0 "Intel PRO/1000CT (82547EI)" rev 0x00: apic 2 int 18 (irq 10), address 00:0c:f1:f5:13:d6 uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: apic 2 int 16 (irq 11) uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: apic 2 int 19 (irq 5) uhci2 at pci0 dev 29 function 2 "Intel 82801EB/ER USB" rev 0x02: apic 2 int 18 (irq 10) uhci3 at pci0 dev 29 function 3 "Intel 82801EB/ER USB" rev 0x02: apic 2 int 16 (irq 11) ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB2" rev 0x02: apic 2 int 23 (irq 9) usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb2 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xc2 pci3 at ppb2 bus 3 ichpcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02 pciide0 at pci0 dev 31 function 1 "Intel 82801EB/ER IDE" rev 0x02: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility wd0 at pciide0 channel 0 drive 0: wd0: 16-sector PIO, LBA, 39205MB, 80293248 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 atapiscsi0 at pciide0 channel 1 drive 1 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: ATAPI 5/cdrom removable cd0(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 4 pciide1 at pci0 dev 31 function 2 "Intel 82801EB SATA" rev 0x02: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide1: using apic 2 int 18 (irq 10) for native-PCI interrupt ichiic0 at pci0 dev 31 function 3 "Intel 82801EB/ER SMBus" rev 0x02: apic 2 int 17 (irq 3) iic0 at ichiic0 adt0 at iic0 addr 0x2e: emc6d100 rev 0x65 spdmem0 at iic0 addr 0x50: 512MB DDR SDRAM non-parity PC2700CL2.5 spdmem1 at iic0 addr 0x51: 512MB DDR SDRAM non-parity PC2700CL2.5 spdmem2 at iic0 addr 0x52: 512MB DDR SDRAM non-parity PC3200CL2.5 spdmem3 at iic0 addr 0x53: 512MB DDR SDRAM non-parity PC3200CL2.5 auich0 at pci0 dev 31 function 5 "Intel 82801EB/ER AC97" rev 0x02: apic 2 int 17 (irq 3), ICH5 AC97 ac97: codec id 0x41445375 (Analog Devices AD1985) ac97: codec features headphone, 20 bit DAC, No 3D Stereo audio0 at auich0 usb1 at uhci0: USB revision 1.0 uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb2 at uhci1: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci2: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci3: USB revision 1.0 uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at ichpcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: spkr0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 mtrr: Pentium Pro MTRR support uhub5 at uhub0 port 1 "Alcor Micro product 0x6254" rev 2.00/1.00 addr 2 uvideo0 at uhub5 port
Re: Mimi UM-740 touchscreen for OpenBSD
Hey Guys, On Mon, Aug 3, 2009 at 10:30 PM, William French wrote: > I have had a go at changing the code base you guys have already coded (big > thanks by the way). Ive included my patch in this email and the output from > usbdevs -v If I remember correctly, your patch makes the screen show as wsdisplay1, is that correct? I would not know how to get that to be used as the console. Any ideas? -- Best Regards Edd Barrett (Freelance software developer / technical writer / open-source developer) http://students.dec.bournemouth.ac.uk/ebarrett
Re: Mimi UM-740 touchscreen for OpenBSD
Hi moj Im pretty sure it is the dl-120 chipet. Theres a picture of the inside of the unit on the website of the company i bought it from. http://www.carcomputer.co.uk/component/page,shop.product_details/flypage,shop.flypage/product_id,322/category_id,46/manufacturer_id,0/option,com_virtuemart/Itemid,26/ I have had a go at changing the code base you guys have already coded (big thanks by the way). Ive included my patch in this email and the output from usbdevs -v Id be the first to admit I have no idea how im going to get this to work with X so any help you can give would be amazing. Cheers Will On Fri, Jul 31, 2009 at 7:46 PM, Mats O Jansson wrote: > On Tue, 28 Jul 2009, Edd Barrett wrote: > > Hello, >> >> My friend is looking to use this small touchscreen for a project he is >> doing. The model is: Mimo UM-740, which he was hoping would be attaching >> to the udl(4) driver. Does anyone know if this screen is based on the >> dl-120/dl-160 chipset? >> >> I have attached a dmesg, the screen was plugged in to my thinkpad. As >> you can see, the mouse and camera are happy, the display itself is not. >> > > As far as I can see the monitor has a DisplayLink chipset in it. But which > is hard to say. An educated guess should be an dl-12x (Since the screen is > 800x480). > > To make the driver work I need the output from > > usbdevs -v > > -moj > > Thanks >> -- >> >> Best Regards >> >> Edd Barrett >> (Freelance software developer / technical writer / open-source developer) >> >> http://students.dec.bmth.ac.uk/ebarrett >> OpenBSD 4.6 (GENERIC) #58: Thu Jul 9 21:24:42 MDT 2009 >> dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC >> cpu0: Intel(R) Pentium(R) M processor 1700MHz ("GenuineIntel" 686-class) >> 1.70 GHz >> cpu0: >> FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,TM,SBF,EST,TM2 >> real mem = 1072656384 (1022MB) >> avail mem = 1028411392 (980MB) >> mainbus0 at root >> bios0 at mainbus0: AT/286+ BIOS, date 09/22/05, BIOS32 rev. 0 @ 0xfd750, >> SMBIOS rev. 2.33 @ 0xe0010 (57 entries) >> bios0: vendor IBM version "1QET97WW (3.02 )" date 09/22/2005 >> bios0: IBM 2673W7Z >> apm0 at bios0: Power Management spec V1.2 >> apm0: battery life expectancy 100% >> apm0: AC on, battery charge high >> acpi at bios0 function 0x0 not configured >> pcibios0 at bios0: rev 2.1 @ 0xfd6e0/0x920 >> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdea0/272 (15 entries) >> pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00) >> pcibios0: PCI bus #6 is the last bus >> bios0: ROM list: 0xc/0x1 0xd/0x1000 0xd1000/0x1000 >> 0xdc000/0x4000! 0xe/0x1 >> cpu0 at mainbus0: (uniprocessor) >> cpu0: Enhanced SpeedStep 1699 MHz: speeds: 1700, 1400, 1200, 1000, 800, >> 600 MHz >> pci0 at mainbus0 bus 0: configuration mode 1 (bios) >> io address conflict 0x5800/0x8 >> io address conflict 0x5808/0x4 >> io address conflict 0x5810/0x8 >> io address conflict 0x580c/0x4 >> pchb0 at pci0 dev 0 function 0 "Intel 82855PM Host" rev 0x03 >> intelagp0 at pchb0 >> agp0 at intelagp0: aperture at 0xd000, size 0x1000 >> ppb0 at pci0 dev 1 function 0 "Intel 82855PM AGP" rev 0x03 >> pci1 at ppb0 bus 1 >> vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility M6" rev 0x00 >> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) >> wsdisplay0: screen 1-5 added (80x25, vt100 emulation) >> radeondrm0 at vga1: irq 11 >> drm0 at radeondrm0 >> uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x01: irq 11 >> uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x01: irq 11 >> uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x01: irq 11 >> ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x01: irq 11 >> usb0 at ehci0: USB revision 2.0 >> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 >> ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x81 >> pci2 at ppb1 bus 2 >> mem address conflict 0xb000/0x1000 >> mem address conflict 0xb100/0x1000 >> cbb0 at pci2 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xaa: irq 11 >> cbb1 at pci2 dev 0 function 1 "Ricoh 5C476 CardBus" rev 0xaa: irq 11 >> "Ricoh 5C552 Firewire" rev 0x02 at pci2 dev 0 function 2 not configured >> em0 at pci2 dev 1 function 0 "Intel PRO/1000MT (82540EP)" rev 0x03: irq >> 11, address 00:11:25:b1:32:43 >> ral0 at pci2 dev 2 function 0 "Ralink RT2561S" rev 0x00: irq 11, address >> 00:12:0e:61:5b:74 >> ral0: MAC/BBP RT2561C, RF RT5225 >> cardslot0 at cbb0 slot 0 flags 0 >> cardbus0 at cardslot0: bus 3 device 0 cacheline 0x0, lattimer 0xb0 >> pcmcia0 at cardslot0 >> cardslot1 at cbb1 slot 1 flags 0 >> cardbus1 at cardslot1: bus 6 device 0 cacheline 0x0, lattimer 0xb0 >> pcmcia1 at cardslot1 >> ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x01: 24-bit >> timer at 3579545Hz >> pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x01: DMA, >> channel 0 configured to compatibility, channel 1 configured to compatibility >> wd0 at pc
Re: Mimi UM-740 touchscreen for OpenBSD
On Tue, 28 Jul 2009, Edd Barrett wrote: Hello, My friend is looking to use this small touchscreen for a project he is doing. The model is: Mimo UM-740, which he was hoping would be attaching to the udl(4) driver. Does anyone know if this screen is based on the dl-120/dl-160 chipset? I have attached a dmesg, the screen was plugged in to my thinkpad. As you can see, the mouse and camera are happy, the display itself is not. As far as I can see the monitor has a DisplayLink chipset in it. But which is hard to say. An educated guess should be an dl-12x (Since the screen is 800x480). To make the driver work I need the output from usbdevs -v -moj Thanks -- Best Regards Edd Barrett (Freelance software developer / technical writer / open-source developer) http://students.dec.bmth.ac.uk/ebarrett OpenBSD 4.6 (GENERIC) #58: Thu Jul 9 21:24:42 MDT 2009 dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel(R) Pentium(R) M processor 1700MHz ("GenuineIntel" 686-class) 1.70 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,TM,SBF,EST,TM2 real mem = 1072656384 (1022MB) avail mem = 1028411392 (980MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 09/22/05, BIOS32 rev. 0 @ 0xfd750, SMBIOS rev. 2.33 @ 0xe0010 (57 entries) bios0: vendor IBM version "1QET97WW (3.02 )" date 09/22/2005 bios0: IBM 2673W7Z apm0 at bios0: Power Management spec V1.2 apm0: battery life expectancy 100% apm0: AC on, battery charge high acpi at bios0 function 0x0 not configured pcibios0 at bios0: rev 2.1 @ 0xfd6e0/0x920 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdea0/272 (15 entries) pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00) pcibios0: PCI bus #6 is the last bus bios0: ROM list: 0xc/0x1 0xd/0x1000 0xd1000/0x1000 0xdc000/0x4000! 0xe/0x1 cpu0 at mainbus0: (uniprocessor) cpu0: Enhanced SpeedStep 1699 MHz: speeds: 1700, 1400, 1200, 1000, 800, 600 MHz pci0 at mainbus0 bus 0: configuration mode 1 (bios) io address conflict 0x5800/0x8 io address conflict 0x5808/0x4 io address conflict 0x5810/0x8 io address conflict 0x580c/0x4 pchb0 at pci0 dev 0 function 0 "Intel 82855PM Host" rev 0x03 intelagp0 at pchb0 agp0 at intelagp0: aperture at 0xd000, size 0x1000 ppb0 at pci0 dev 1 function 0 "Intel 82855PM AGP" rev 0x03 pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility M6" rev 0x00 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) radeondrm0 at vga1: irq 11 drm0 at radeondrm0 uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x01: irq 11 uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x01: irq 11 uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x01: irq 11 ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x01: irq 11 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x81 pci2 at ppb1 bus 2 mem address conflict 0xb000/0x1000 mem address conflict 0xb100/0x1000 cbb0 at pci2 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xaa: irq 11 cbb1 at pci2 dev 0 function 1 "Ricoh 5C476 CardBus" rev 0xaa: irq 11 "Ricoh 5C552 Firewire" rev 0x02 at pci2 dev 0 function 2 not configured em0 at pci2 dev 1 function 0 "Intel PRO/1000MT (82540EP)" rev 0x03: irq 11, address 00:11:25:b1:32:43 ral0 at pci2 dev 2 function 0 "Ralink RT2561S" rev 0x00: irq 11, address 00:12:0e:61:5b:74 ral0: MAC/BBP RT2561C, RF RT5225 cardslot0 at cbb0 slot 0 flags 0 cardbus0 at cardslot0: bus 3 device 0 cacheline 0x0, lattimer 0xb0 pcmcia0 at cardslot0 cardslot1 at cbb1 slot 1 flags 0 cardbus1 at cardslot1: bus 6 device 0 cacheline 0x0, lattimer 0xb0 pcmcia1 at cardslot1 ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x01: 24-bit timer at 3579545Hz pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x01: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility wd0 at pciide0 channel 0 drive 0: wd0: 16-sector PIO, LBA, 57231MB, 117210240 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 pciide0: channel 1 disabled (no drives) ichiic0 at pci0 dev 31 function 3 "Intel 82801DB SMBus" rev 0x01: irq 11 iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 512MB DDR SDRAM non-parity PC2700CL2.5 spdmem1 at iic0 addr 0x51: 512MB DDR SDRAM non-parity PC2700CL2.5 auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x01: irq 11, ICH4 AC97 ac97: codec id 0x41445374 (Analog Devices AD1981B) ac97: codec features headphone, 20 bit DAC, No 3D Stereo audio0 at auich0 "Intel 82801DB Modem" rev 0x01 at pci0 dev 31 function 6 not configured usb1 at uhci0: USB revision 1.0 uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb2 at uhci1: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci2: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr