Re: ThinkPad X31, ACPI, suspend/hibernate buttons
On 23/03/07, openbsd fan <[EMAIL PROTECTED]> wrote: NO. Its use APM instead of ACPI. The Phoenix BIOS in the X31 uses APM instead of ACPI. Gotcha, thanks. -- viq
Re: ThinkPad X31, ACPI, suspend/hibernate buttons
On 23/03/07, Marco Peereboom <[EMAIL PROTECTED]> wrote: Nothing "stopped" working. It has never been implemented in ACPI. Ah, ok, so it's "have thermal sensors or have suspend keys work", as I suspected. Thank you for clarification. On Fri, Mar 23, 2007 at 09:25:29PM +0100, viq wrote: > I have a TP X31 on which I just compiled ACPI-enabled kernel, so I > finally can get access to the thermal sensors. But, at the same time, > the shortcuts to suspend (Fn+F4), hibernate (Fn+F12) or even turn off > the screen (Fn+F3) stopped working. Is that a known behaviour? Is > there a way to make those work again? > > Kernel config I used: > = > include "arch/i386/conf/GENERIC" > > option ACPIVERBOSE > option ACPI_ENABLE > acpi0 at mainbus? > acpitimer* at acpi? > acpihpet* at acpi? > acpiac* at acpi? > acpibat*at acpi? > acpibtn*at acpi? > acpicpu*at acpi? > acpidock* at acpi? > acpiec* at acpi? > acpiprt*at acpi? > acpitz* at acpi? > === > > Just in case, dmesg below: > > OpenBSD 4.1-current (ACPI) #1: Thu Mar 22 11:59:36 CET 2007 >[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/ACPI > cpu0: Intel(R) Pentium(R) M processor 1600MHz ("GenuineIntel" > 686-class) 1.60 GHz > cpu0: > FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,TM,SBF,EST,TM2 > real mem = 804155392 (785308K) > avail mem = 725643264 (708636K) > using 4278 buffers containing 4012 bytes (39388K) of memory > mainbus0 (root) > bios0 at mainbus0: AT/286+ BIOS, date 09/22/05, BIOS32 rev. 0 @ > 0xfd750, SMBIOS rev. 2.33 @ 0xe0010 (57 entries) > bios0: IBM 2885PWU > apm0 at bios0: Power Management spec V1.2 > apm0: battery life expectancy 100% > apm0: AC on, battery charge high > apm0: flags 30102 dobusy 0 doidle 1 > pcibios0 at bios0: rev 2.1 @ 0xfd6e0/0x920 > pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdea0/272 (15 entries) > pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00) > pcibios0: PCI bus #6 is the last bus > bios0: ROM list: 0xc/0x1 0xd/0x1000 0xd1000/0x1000 > 0xdc000/0x4000! 0xe/0x1 > acpi0 at mainbus0: rev 2 > acpi0: tables DSDT FACP SSDT ECDT TCPA BOOT > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpi device at acpi0 from table DSDT not configured > acpi device at acpi0 from table FACP not configured > acpi device at acpi0 from table SSDT not configured > acpi device at acpi0 from table ECDT not configured > acpi device at acpi0 from table TCPA not configured > acpi device at acpi0 from table BOOT not configured > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 1 (AGP_) > acpiprt2 at acpi0: bus 2 (PCI1) > acpiprt3 at acpi0: bus 0 (DOCK) > acpiec0 at acpi0: EC__ > acpibtn0 at acpi0: LID_ > acpibtn1 at acpi0: SLPB > acpibat0 at acpi0: BAT0: model: IBM-08K8039 serial: 1202 type: LION > oem: Panasonic > acpibat1 at acpi0: BAT1: not present > acpibat2 at acpi0: BAT2: not present > acpiac0 at acpi0: AC unit online > acpicpu0 at acpi0: CPU_: 1600, 1400, 1200, 1000, 800, 600 MHz > acpitz0 at acpi0, critical temperature: 91 degC > cpu0 at mainbus0 > pci0 at mainbus0 bus 0: configuration mode 1 (no bios) > pchb0 at pci0 dev 0 function 0 "Intel 82855PE Hub" rev 0x03 > ppb0 at pci0 dev 1 function 0 "Intel 82855PE AGP" rev 0x03 > pci1 at ppb0 bus 1 > vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility M6 LY" rev 0x00 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x01: irq 11 > uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x01: irq 11 > uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x01: irq 11 > ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x01: irq 11 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 > uhub0: Intel EHCI root hub, rev 2.00/1.00, addr 1 > uhub0: 6 ports with 6 removable, self powered > ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x81 > pci2 at ppb1 bus 2 > cbb0 at pci2 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xaa: irq 11 > cbb1 at pci2 dev 0 function 1 "Ricoh 5C476 CardBus" rev 0xaa: irq 5 > "Ricoh 5C552 Firewire" rev 0x02 at pci2 dev 0 function 2 not configured > em0 at pci2 dev 1 function 0 "Intel PRO/1000MT (82540EP)" rev 0x03: > irq 11, address 00:09:6b:bf:79:b0 > ipw0 at pci2 dev 2 function 0 "Intel PRO/Wireless 2100" rev 0x04: irq > 11, address 00:04:23:78:c1:da > cardslot0 at cbb0 slot 0 flags 0 > cardbus0 at cardslot0: bus 3 device 0 cacheline 0x0, lattimer 0xb0 > pcmcia0 at cardslot0 > cardslot1 at cbb1 slot 1 flags 0 > cardbus1 at cardslot1: bus 6 device 0 cacheline 0x0, lattimer 0xb0 > pcmcia1 at cardslot1 > ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x01 > pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x01: DMA, > channel 0 configured to compatibility
Re: ThinkPad X31, ACPI, suspend/hibernate buttons
NO. Its use APM instead of ACPI. The Phoenix BIOS in the X31 uses APM instead of ACPI. On 3/23/07, viq <[EMAIL PROTECTED]> wrote: > > On 23/03/07, Marco Peereboom <[EMAIL PROTECTED]> wrote: > > Nothing "stopped" working. It has never been implemented in ACPI. > > Ah, ok, so it's "have thermal sensors or have suspend keys work", as I > suspected. Thank you for clarification. > > > On Fri, Mar 23, 2007 at 09:25:29PM +0100, viq wrote: > > > I have a TP X31 on which I just compiled ACPI-enabled kernel, so I > > > finally can get access to the thermal sensors. But, at the same time, > > > the shortcuts to suspend (Fn+F4), hibernate (Fn+F12) or even turn off > > > the screen (Fn+F3) stopped working. Is that a known behaviour? Is > > > there a way to make those work again? > > > > > > Kernel config I used: > > > = > > > include "arch/i386/conf/GENERIC" > > > > > > option ACPIVERBOSE > > > option ACPI_ENABLE > > > acpi0 at mainbus? > > > acpitimer* at acpi? > > > acpihpet* at acpi? > > > acpiac* at acpi? > > > acpibat*at acpi? > > > acpibtn*at acpi? > > > acpicpu*at acpi? > > > acpidock* at acpi? > > > acpiec* at acpi? > > > acpiprt*at acpi? > > > acpitz* at acpi? > > > === > > > > > > Just in case, dmesg below: > > > > > > OpenBSD 4.1-current (ACPI) #1: Thu Mar 22 11:59:36 CET 2007 > > >[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/ACPI > > > cpu0: Intel(R) Pentium(R) M processor 1600MHz ("GenuineIntel" > > > 686-class) 1.60 GHz > > > cpu0: > > > > FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,TM,SBF,EST,TM2 > > > real mem = 804155392 (785308K) > > > avail mem = 725643264 (708636K) > > > using 4278 buffers containing 4012 bytes (39388K) of memory > > > mainbus0 (root) > > > bios0 at mainbus0: AT/286+ BIOS, date 09/22/05, BIOS32 rev. 0 @ > > > 0xfd750, SMBIOS rev. 2.33 @ 0xe0010 (57 entries) > > > bios0: IBM 2885PWU > > > apm0 at bios0: Power Management spec V1.2 > > > apm0: battery life expectancy 100% > > > apm0: AC on, battery charge high > > > apm0: flags 30102 dobusy 0 doidle 1 > > > pcibios0 at bios0: rev 2.1 @ 0xfd6e0/0x920 > > > pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdea0/272 (15 entries) > > > pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev > 0x00) > > > pcibios0: PCI bus #6 is the last bus > > > bios0: ROM list: 0xc/0x1 0xd/0x1000 0xd1000/0x1000 > > > 0xdc000/0x4000! 0xe/0x1 > > > acpi0 at mainbus0: rev 2 > > > acpi0: tables DSDT FACP SSDT ECDT TCPA BOOT > > > acpitimer0 at acpi0: 3579545 Hz, 24 bits > > > acpi device at acpi0 from table DSDT not configured > > > acpi device at acpi0 from table FACP not configured > > > acpi device at acpi0 from table SSDT not configured > > > acpi device at acpi0 from table ECDT not configured > > > acpi device at acpi0 from table TCPA not configured > > > acpi device at acpi0 from table BOOT not configured > > > acpiprt0 at acpi0: bus 0 (PCI0) > > > acpiprt1 at acpi0: bus 1 (AGP_) > > > acpiprt2 at acpi0: bus 2 (PCI1) > > > acpiprt3 at acpi0: bus 0 (DOCK) > > > acpiec0 at acpi0: EC__ > > > acpibtn0 at acpi0: LID_ > > > acpibtn1 at acpi0: SLPB > > > acpibat0 at acpi0: BAT0: model: IBM-08K8039 serial: 1202 type: LION > > > oem: Panasonic > > > acpibat1 at acpi0: BAT1: not present > > > acpibat2 at acpi0: BAT2: not present > > > acpiac0 at acpi0: AC unit online > > > acpicpu0 at acpi0: CPU_: 1600, 1400, 1200, 1000, 800, 600 MHz > > > acpitz0 at acpi0, critical temperature: 91 degC > > > cpu0 at mainbus0 > > > pci0 at mainbus0 bus 0: configuration mode 1 (no bios) > > > pchb0 at pci0 dev 0 function 0 "Intel 82855PE Hub" rev 0x03 > > > ppb0 at pci0 dev 1 function 0 "Intel 82855PE AGP" rev 0x03 > > > pci1 at ppb0 bus 1 > > > vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility M6 LY" rev 0x00 > > > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > > > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > > > uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x01: irq 11 > > > uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x01: irq 11 > > > uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x01: irq 11 > > > ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x01: irq 11 > > > usb0 at ehci0: USB revision 2.0 > > > uhub0 at usb0 > > > uhub0: Intel EHCI root hub, rev 2.00/1.00, addr 1 > > > uhub0: 6 ports with 6 removable, self powered > > > ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x81 > > > pci2 at ppb1 bus 2 > > > cbb0 at pci2 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xaa: irq 11 > > > cbb1 at pci2 dev 0 function 1 "Ricoh 5C476 CardBus" rev 0xaa: irq 5 > > > "Ricoh 5C552 Firewire" rev 0x02 at pci2 dev 0 function 2 not > configured > > > em0 at pci2 dev 1 function 0 "Intel PRO/1000MT (82540EP)" rev 0x03: > > > irq 11, address 00:09:6b:bf:79:b0
Re: ThinkPad X31, ACPI, suspend/hibernate buttons
Nothing "stopped" working. It has never been implemented in ACPI. On Fri, Mar 23, 2007 at 09:25:29PM +0100, viq wrote: > I have a TP X31 on which I just compiled ACPI-enabled kernel, so I > finally can get access to the thermal sensors. But, at the same time, > the shortcuts to suspend (Fn+F4), hibernate (Fn+F12) or even turn off > the screen (Fn+F3) stopped working. Is that a known behaviour? Is > there a way to make those work again? > > Kernel config I used: > = > include "arch/i386/conf/GENERIC" > > option ACPIVERBOSE > option ACPI_ENABLE > acpi0 at mainbus? > acpitimer* at acpi? > acpihpet* at acpi? > acpiac* at acpi? > acpibat*at acpi? > acpibtn*at acpi? > acpicpu*at acpi? > acpidock* at acpi? > acpiec* at acpi? > acpiprt*at acpi? > acpitz* at acpi? > === > > Just in case, dmesg below: > > OpenBSD 4.1-current (ACPI) #1: Thu Mar 22 11:59:36 CET 2007 >[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/ACPI > cpu0: Intel(R) Pentium(R) M processor 1600MHz ("GenuineIntel" > 686-class) 1.60 GHz > cpu0: > FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,TM,SBF,EST,TM2 > real mem = 804155392 (785308K) > avail mem = 725643264 (708636K) > using 4278 buffers containing 4012 bytes (39388K) of memory > mainbus0 (root) > bios0 at mainbus0: AT/286+ BIOS, date 09/22/05, BIOS32 rev. 0 @ > 0xfd750, SMBIOS rev. 2.33 @ 0xe0010 (57 entries) > bios0: IBM 2885PWU > apm0 at bios0: Power Management spec V1.2 > apm0: battery life expectancy 100% > apm0: AC on, battery charge high > apm0: flags 30102 dobusy 0 doidle 1 > pcibios0 at bios0: rev 2.1 @ 0xfd6e0/0x920 > pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdea0/272 (15 entries) > pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00) > pcibios0: PCI bus #6 is the last bus > bios0: ROM list: 0xc/0x1 0xd/0x1000 0xd1000/0x1000 > 0xdc000/0x4000! 0xe/0x1 > acpi0 at mainbus0: rev 2 > acpi0: tables DSDT FACP SSDT ECDT TCPA BOOT > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpi device at acpi0 from table DSDT not configured > acpi device at acpi0 from table FACP not configured > acpi device at acpi0 from table SSDT not configured > acpi device at acpi0 from table ECDT not configured > acpi device at acpi0 from table TCPA not configured > acpi device at acpi0 from table BOOT not configured > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 1 (AGP_) > acpiprt2 at acpi0: bus 2 (PCI1) > acpiprt3 at acpi0: bus 0 (DOCK) > acpiec0 at acpi0: EC__ > acpibtn0 at acpi0: LID_ > acpibtn1 at acpi0: SLPB > acpibat0 at acpi0: BAT0: model: IBM-08K8039 serial: 1202 type: LION > oem: Panasonic > acpibat1 at acpi0: BAT1: not present > acpibat2 at acpi0: BAT2: not present > acpiac0 at acpi0: AC unit online > acpicpu0 at acpi0: CPU_: 1600, 1400, 1200, 1000, 800, 600 MHz > acpitz0 at acpi0, critical temperature: 91 degC > cpu0 at mainbus0 > pci0 at mainbus0 bus 0: configuration mode 1 (no bios) > pchb0 at pci0 dev 0 function 0 "Intel 82855PE Hub" rev 0x03 > ppb0 at pci0 dev 1 function 0 "Intel 82855PE AGP" rev 0x03 > pci1 at ppb0 bus 1 > vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility M6 LY" rev 0x00 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x01: irq 11 > uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x01: irq 11 > uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x01: irq 11 > ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x01: irq 11 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 > uhub0: Intel EHCI root hub, rev 2.00/1.00, addr 1 > uhub0: 6 ports with 6 removable, self powered > ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x81 > pci2 at ppb1 bus 2 > cbb0 at pci2 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xaa: irq 11 > cbb1 at pci2 dev 0 function 1 "Ricoh 5C476 CardBus" rev 0xaa: irq 5 > "Ricoh 5C552 Firewire" rev 0x02 at pci2 dev 0 function 2 not configured > em0 at pci2 dev 1 function 0 "Intel PRO/1000MT (82540EP)" rev 0x03: > irq 11, address 00:09:6b:bf:79:b0 > ipw0 at pci2 dev 2 function 0 "Intel PRO/Wireless 2100" rev 0x04: irq > 11, address 00:04:23:78:c1:da > cardslot0 at cbb0 slot 0 flags 0 > cardbus0 at cardslot0: bus 3 device 0 cacheline 0x0, lattimer 0xb0 > pcmcia0 at cardslot0 > cardslot1 at cbb1 slot 1 flags 0 > cardbus1 at cardslot1: bus 6 device 0 cacheline 0x0, lattimer 0xb0 > pcmcia1 at cardslot1 > ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x01 > pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x01: DMA, > channel 0 configured to compatibility, channel 1 configured to > compatibility > wd0 at pciide0 channel 0 drive 0: > wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors > wd0(pciide0:0:0): using PIO mo
ThinkPad X31, ACPI, suspend/hibernate buttons
I have a TP X31 on which I just compiled ACPI-enabled kernel, so I finally can get access to the thermal sensors. But, at the same time, the shortcuts to suspend (Fn+F4), hibernate (Fn+F12) or even turn off the screen (Fn+F3) stopped working. Is that a known behaviour? Is there a way to make those work again? Kernel config I used: = include "arch/i386/conf/GENERIC" option ACPIVERBOSE option ACPI_ENABLE acpi0 at mainbus? acpitimer* at acpi? acpihpet* at acpi? acpiac* at acpi? acpibat*at acpi? acpibtn*at acpi? acpicpu*at acpi? acpidock* at acpi? acpiec* at acpi? acpiprt*at acpi? acpitz* at acpi? === Just in case, dmesg below: OpenBSD 4.1-current (ACPI) #1: Thu Mar 22 11:59:36 CET 2007 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/ACPI cpu0: Intel(R) Pentium(R) M processor 1600MHz ("GenuineIntel" 686-class) 1.60 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,TM,SBF,EST,TM2 real mem = 804155392 (785308K) avail mem = 725643264 (708636K) using 4278 buffers containing 4012 bytes (39388K) of memory mainbus0 (root) bios0 at mainbus0: AT/286+ BIOS, date 09/22/05, BIOS32 rev. 0 @ 0xfd750, SMBIOS rev. 2.33 @ 0xe0010 (57 entries) bios0: IBM 2885PWU apm0 at bios0: Power Management spec V1.2 apm0: battery life expectancy 100% apm0: AC on, battery charge high apm0: flags 30102 dobusy 0 doidle 1 pcibios0 at bios0: rev 2.1 @ 0xfd6e0/0x920 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdea0/272 (15 entries) pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00) pcibios0: PCI bus #6 is the last bus bios0: ROM list: 0xc/0x1 0xd/0x1000 0xd1000/0x1000 0xdc000/0x4000! 0xe/0x1 acpi0 at mainbus0: rev 2 acpi0: tables DSDT FACP SSDT ECDT TCPA BOOT acpitimer0 at acpi0: 3579545 Hz, 24 bits acpi device at acpi0 from table DSDT not configured acpi device at acpi0 from table FACP not configured acpi device at acpi0 from table SSDT not configured acpi device at acpi0 from table ECDT not configured acpi device at acpi0 from table TCPA not configured acpi device at acpi0 from table BOOT not configured acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 1 (AGP_) acpiprt2 at acpi0: bus 2 (PCI1) acpiprt3 at acpi0: bus 0 (DOCK) acpiec0 at acpi0: EC__ acpibtn0 at acpi0: LID_ acpibtn1 at acpi0: SLPB acpibat0 at acpi0: BAT0: model: IBM-08K8039 serial: 1202 type: LION oem: Panasonic acpibat1 at acpi0: BAT1: not present acpibat2 at acpi0: BAT2: not present acpiac0 at acpi0: AC unit online acpicpu0 at acpi0: CPU_: 1600, 1400, 1200, 1000, 800, 600 MHz acpitz0 at acpi0, critical temperature: 91 degC cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "Intel 82855PE Hub" rev 0x03 ppb0 at pci0 dev 1 function 0 "Intel 82855PE AGP" rev 0x03 pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility M6 LY" rev 0x00 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x01: irq 11 uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x01: irq 11 uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x01: irq 11 ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x01: irq 11 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 uhub0: Intel EHCI root hub, rev 2.00/1.00, addr 1 uhub0: 6 ports with 6 removable, self powered ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x81 pci2 at ppb1 bus 2 cbb0 at pci2 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xaa: irq 11 cbb1 at pci2 dev 0 function 1 "Ricoh 5C476 CardBus" rev 0xaa: irq 5 "Ricoh 5C552 Firewire" rev 0x02 at pci2 dev 0 function 2 not configured em0 at pci2 dev 1 function 0 "Intel PRO/1000MT (82540EP)" rev 0x03: irq 11, address 00:09:6b:bf:79:b0 ipw0 at pci2 dev 2 function 0 "Intel PRO/Wireless 2100" rev 0x04: irq 11, address 00:04:23:78:c1:da cardslot0 at cbb0 slot 0 flags 0 cardbus0 at cardslot0: bus 3 device 0 cacheline 0x0, lattimer 0xb0 pcmcia0 at cardslot0 cardslot1 at cbb1 slot 1 flags 0 cardbus1 at cardslot1: bus 6 device 0 cacheline 0x0, lattimer 0xb0 pcmcia1 at cardslot1 ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x01 pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x01: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility wd0 at pciide0 channel 0 drive 0: wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 atapiscsi0 at pciide0 channel 1 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: SCSI0 5/cdrom removable cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 ichiic0 at pci0 dev 31 function 3 "Intel 82801DB SMBus" rev 0x01: irq 5 iic0 at ichiic0 auich0 at pci0 dev 31 function 5 "Intel 82801DB A