Re: radeon driver bug?
I updated my -current version today, and found that the skeletal 3D animation runs very fine. Of course, any other models run fine, too. Thank you developpers to update drm drivers of amdgpu! It still has sometime to freeze the move (yes, about 30 seconds) when I do something like stop the motion etc,, however, I cannot confirm the precise condition of it yet... Kenji 2018年12月19日(水) 15:49 岡本健二 : > I made FreeBSD 12-Release on another disk of the same graphic (HD 6450 > graphic card), > and got success to run Jahshaka 3D animation. Yes, no animation stop! > It uses mesa-18.1.9. > Its colors are not so good as OpenBSD's mesa version, however, it works. > > Kenji > > > 2018年12月11日(火) 13:14 岡本健二 : > >> Ok, I upgraded my OpenBSD system to -current, and rebuild the Jahshaka. >> After all, the results are same as before. >> >> Skeletal Animations runs for less than 1 second, and halt for about 35 >> seconds, >> and then runs for less than 1 second, and halt for about 35 second(yes, >> it's same)... >> Above cycle continues eternally. >> >> Kenji >> >> >> 2018年12月10日(月) 1:23 tfrohw...@fastmail.com : >> >>> On December 9, 2018 1:22:42 AM UTC, "岡本健二" wrote: >>> >I found mesa-libs-18.1.9 for FreeBSD ports. >>> >How can I get it without FreeBSD system? >>> > >>> >Kenji >>> > >>> > >>> >2018年12月8日(土) 14:48 岡本健二 : >>> > >>> >> I installed Ubuntu 18.04 to a AMD 6450 graphic card, and played >>> >> Jahshaka. It has mesa version 18.2, and runs Jahshaka very >>> >> smoothly. >>> >> >>> >> The colors I reported before are same in this machine, so that >>> >> report was not correct. >>> >> >>> >> Kenji >>> >> >>> >> 2018年12月7日(金) 11:09 岡本健二 : >>> >> >>> >>> I checked mesa-18.3.0 sources under src/gallium/drivers/r600 and >>> >compared >>> >>> with those >>> >>> of xenocara. File names are all same, however, individual sizes are >>> >very >>> >>> different for >>> >>> most of those, which would not permit me to copy those to >>> >xenocara... >>> >>> >>> >>> Kenji >>> >>> >>> >>> >>> >>> 2018年12月6日(木) 15:14 岡本健二 : >>> >>> >>> also, it stull has some bugs, because the colors of some >>> parts are different from those of original ones. >>> >>> Kenji >>> >>> >>> 2018年12月6日(木) 15:10 岡本健二 : >>> >>> > Sorry, I'm a novice to OpenBSD. >>> > Yes, it's current branch of xenocara. >>> > I updated my xenocara (stable) to that current, and build new >>> >xenocara >>> > here. >>> > >>> > Wow, it makes the Jahshaka works! >>> > >>> > However, it still has some bugs, because it moves and stop >>> >suddenly and >>> > then >>> > move again. Whine the animation stops, the system seems to >>> >halting... >>> > >>> > Anyway it makes much advance, I included the screenshot of it. >>> > >>> > Kenji >>> > >>> > PS: sorry tfrohwein, this is doubled to you >>> > >>> > 2018年12月6日(木) 13:26 岡本健二 : >>> > >>> >> in-current means stable 6.4? >>> >> >>> >> Kenji >>> >> >>> >> 2018年12月5日(水) 23:58 tfrohw...@fastmail.com >>> >: >>> >> >>> >>> On December 5, 2018 9:41:44 AM UTC, "岡本健二" >>> >>> wrote: >>> >>> >This errors come from >>> >>> >>> >>/usr/xenocara/lib/mesa/src/gallium/drivers/r600/r600_state_common.c. >>> >>> >The mesa version of OpenBSD6.4 is 13.0.6. >>> >>> >I'm running this Jahshaka on Ubutu 18.04, where the mesa >>> >version is >>> >>> >18.x. >>> >>> > >>> >>> >So, it may be the mesa problem... >>> >>> > >>> >>> >Kenji >>> >>> > >>> >>> > >>> >>> >2018年12月4日(火) 16:19 岡本健二 : >>> >>> > >>> >>> >> I'm using AMD HD6450 graphic card which I reported before, >>> >and >>> >>> faced >>> >>> >a >>> >>> >> curious thing >>> >>> >> during running Jahshaka Studio (dev version 7.03a). >>> >>> >> To run Jahshaka on OpenBSD 6.4 I needed to delete google >>> >breakpad >>> >>> >> temporally, which >>> >>> >> is not the problem now. >>> >>> >> >>> >>> >> After start to run 'Jahshaka Studio', I got start 3D >>> >animation >>> >>> sample >>> >>> >> 'Skeletal Animation' data to load, then >>> >>> >> I got many errors included below which seems to come from >>> >radeon >>> >>> drm >>> >>> >> driver's bug to me. >>> >>> >> If you interested please check it. >>> >>> >> >>> >>> >> Thanks in advance >>> >>> >> >>> >>> >> Kenji >>> >>> >> >>> >>> >> >>> >>> >>> >>> There's a known bug where the shader on r600 uses too many >>> >registers: >>> >>> >>> >>> https://bugs.freedesktop.org/show_bug.cgi?id=99349 >>> >>> >>> >>> I encountered this bug with godot on a Radeon HD 7570, too, and >>> >it >>> >>> went away with the updated mesa that's in -current. >>> >>> >>> >> >>> >>> I think you are asking for way more than you (or most misc@ readers) >>> can handle. Porting low-level libraries from FreeBSD is far from trivial. >>> >>> My advice remains:
Re: radeon driver bug?
I made FreeBSD 12-Release on another disk of the same graphic (HD 6450 graphic card), and got success to run Jahshaka 3D animation. Yes, no animation stop! It uses mesa-18.1.9. Its colors are not so good as OpenBSD's mesa version, however, it works. Kenji 2018年12月11日(火) 13:14 岡本健二 : > Ok, I upgraded my OpenBSD system to -current, and rebuild the Jahshaka. > After all, the results are same as before. > > Skeletal Animations runs for less than 1 second, and halt for about 35 > seconds, > and then runs for less than 1 second, and halt for about 35 second(yes, > it's same)... > Above cycle continues eternally. > > Kenji > > > 2018年12月10日(月) 1:23 tfrohw...@fastmail.com : > >> On December 9, 2018 1:22:42 AM UTC, "岡本健二" wrote: >> >I found mesa-libs-18.1.9 for FreeBSD ports. >> >How can I get it without FreeBSD system? >> > >> >Kenji >> > >> > >> >2018年12月8日(土) 14:48 岡本健二 : >> > >> >> I installed Ubuntu 18.04 to a AMD 6450 graphic card, and played >> >> Jahshaka. It has mesa version 18.2, and runs Jahshaka very >> >> smoothly. >> >> >> >> The colors I reported before are same in this machine, so that >> >> report was not correct. >> >> >> >> Kenji >> >> >> >> 2018年12月7日(金) 11:09 岡本健二 : >> >> >> >>> I checked mesa-18.3.0 sources under src/gallium/drivers/r600 and >> >compared >> >>> with those >> >>> of xenocara. File names are all same, however, individual sizes are >> >very >> >>> different for >> >>> most of those, which would not permit me to copy those to >> >xenocara... >> >>> >> >>> Kenji >> >>> >> >>> >> >>> 2018年12月6日(木) 15:14 岡本健二 : >> >>> >> also, it stull has some bugs, because the colors of some >> parts are different from those of original ones. >> >> Kenji >> >> >> 2018年12月6日(木) 15:10 岡本健二 : >> >> > Sorry, I'm a novice to OpenBSD. >> > Yes, it's current branch of xenocara. >> > I updated my xenocara (stable) to that current, and build new >> >xenocara >> > here. >> > >> > Wow, it makes the Jahshaka works! >> > >> > However, it still has some bugs, because it moves and stop >> >suddenly and >> > then >> > move again. Whine the animation stops, the system seems to >> >halting... >> > >> > Anyway it makes much advance, I included the screenshot of it. >> > >> > Kenji >> > >> > PS: sorry tfrohwein, this is doubled to you >> > >> > 2018年12月6日(木) 13:26 岡本健二 : >> > >> >> in-current means stable 6.4? >> >> >> >> Kenji >> >> >> >> 2018年12月5日(水) 23:58 tfrohw...@fastmail.com >> >: >> >> >> >>> On December 5, 2018 9:41:44 AM UTC, "岡本健二" >> >>> wrote: >> >>> >This errors come from >> >>> >> >>/usr/xenocara/lib/mesa/src/gallium/drivers/r600/r600_state_common.c. >> >>> >The mesa version of OpenBSD6.4 is 13.0.6. >> >>> >I'm running this Jahshaka on Ubutu 18.04, where the mesa >> >version is >> >>> >18.x. >> >>> > >> >>> >So, it may be the mesa problem... >> >>> > >> >>> >Kenji >> >>> > >> >>> > >> >>> >2018年12月4日(火) 16:19 岡本健二 : >> >>> > >> >>> >> I'm using AMD HD6450 graphic card which I reported before, >> >and >> >>> faced >> >>> >a >> >>> >> curious thing >> >>> >> during running Jahshaka Studio (dev version 7.03a). >> >>> >> To run Jahshaka on OpenBSD 6.4 I needed to delete google >> >breakpad >> >>> >> temporally, which >> >>> >> is not the problem now. >> >>> >> >> >>> >> After start to run 'Jahshaka Studio', I got start 3D >> >animation >> >>> sample >> >>> >> 'Skeletal Animation' data to load, then >> >>> >> I got many errors included below which seems to come from >> >radeon >> >>> drm >> >>> >> driver's bug to me. >> >>> >> If you interested please check it. >> >>> >> >> >>> >> Thanks in advance >> >>> >> >> >>> >> Kenji >> >>> >> >> >>> >> >> >>> >> >>> There's a known bug where the shader on r600 uses too many >> >registers: >> >>> >> >>> https://bugs.freedesktop.org/show_bug.cgi?id=99349 >> >>> >> >>> I encountered this bug with godot on a Radeon HD 7570, too, and >> >it >> >>> went away with the updated mesa that's in -current. >> >>> >> >> >> >> I think you are asking for way more than you (or most misc@ readers) can >> handle. Porting low-level libraries from FreeBSD is far from trivial. >> >> My advice remains: if you want working graphics, you should run >> OpenBSD-current, not 6.4-release. What you did is try to plug in stuff from >> -current into 6.4 which is huge gamble and I'm not surprised if the result >> is weird. >> >> Just read the OpenBSD FAQ again for how to install -current. I would stop >> experimenting like you've one until you understand the system much better >> than now. >> >
Re: radeon driver bug?
Ok, I upgraded my OpenBSD system to -current, and rebuild the Jahshaka. After all, the results are same as before. Skeletal Animations runs for less than 1 second, and halt for about 35 seconds, and then runs for less than 1 second, and halt for about 35 second(yes, it's same)... Above cycle continues eternally. Kenji 2018年12月10日(月) 1:23 tfrohw...@fastmail.com : > On December 9, 2018 1:22:42 AM UTC, "岡本健二" wrote: > >I found mesa-libs-18.1.9 for FreeBSD ports. > >How can I get it without FreeBSD system? > > > >Kenji > > > > > >2018年12月8日(土) 14:48 岡本健二 : > > > >> I installed Ubuntu 18.04 to a AMD 6450 graphic card, and played > >> Jahshaka. It has mesa version 18.2, and runs Jahshaka very > >> smoothly. > >> > >> The colors I reported before are same in this machine, so that > >> report was not correct. > >> > >> Kenji > >> > >> 2018年12月7日(金) 11:09 岡本健二 : > >> > >>> I checked mesa-18.3.0 sources under src/gallium/drivers/r600 and > >compared > >>> with those > >>> of xenocara. File names are all same, however, individual sizes are > >very > >>> different for > >>> most of those, which would not permit me to copy those to > >xenocara... > >>> > >>> Kenji > >>> > >>> > >>> 2018年12月6日(木) 15:14 岡本健二 : > >>> > also, it stull has some bugs, because the colors of some > parts are different from those of original ones. > > Kenji > > > 2018年12月6日(木) 15:10 岡本健二 : > > > Sorry, I'm a novice to OpenBSD. > > Yes, it's current branch of xenocara. > > I updated my xenocara (stable) to that current, and build new > >xenocara > > here. > > > > Wow, it makes the Jahshaka works! > > > > However, it still has some bugs, because it moves and stop > >suddenly and > > then > > move again. Whine the animation stops, the system seems to > >halting... > > > > Anyway it makes much advance, I included the screenshot of it. > > > > Kenji > > > > PS: sorry tfrohwein, this is doubled to you > > > > 2018年12月6日(木) 13:26 岡本健二 : > > > >> in-current means stable 6.4? > >> > >> Kenji > >> > >> 2018年12月5日(水) 23:58 tfrohw...@fastmail.com > >: > >> > >>> On December 5, 2018 9:41:44 AM UTC, "岡本健二" > >>> wrote: > >>> >This errors come from > >>> > >>/usr/xenocara/lib/mesa/src/gallium/drivers/r600/r600_state_common.c. > >>> >The mesa version of OpenBSD6.4 is 13.0.6. > >>> >I'm running this Jahshaka on Ubutu 18.04, where the mesa > >version is > >>> >18.x. > >>> > > >>> >So, it may be the mesa problem... > >>> > > >>> >Kenji > >>> > > >>> > > >>> >2018年12月4日(火) 16:19 岡本健二 : > >>> > > >>> >> I'm using AMD HD6450 graphic card which I reported before, > >and > >>> faced > >>> >a > >>> >> curious thing > >>> >> during running Jahshaka Studio (dev version 7.03a). > >>> >> To run Jahshaka on OpenBSD 6.4 I needed to delete google > >breakpad > >>> >> temporally, which > >>> >> is not the problem now. > >>> >> > >>> >> After start to run 'Jahshaka Studio', I got start 3D > >animation > >>> sample > >>> >> 'Skeletal Animation' data to load, then > >>> >> I got many errors included below which seems to come from > >radeon > >>> drm > >>> >> driver's bug to me. > >>> >> If you interested please check it. > >>> >> > >>> >> Thanks in advance > >>> >> > >>> >> Kenji > >>> >> > >>> >> > >>> > >>> There's a known bug where the shader on r600 uses too many > >registers: > >>> > >>> https://bugs.freedesktop.org/show_bug.cgi?id=99349 > >>> > >>> I encountered this bug with godot on a Radeon HD 7570, too, and > >it > >>> went away with the updated mesa that's in -current. > >>> > >> > > I think you are asking for way more than you (or most misc@ readers) can > handle. Porting low-level libraries from FreeBSD is far from trivial. > > My advice remains: if you want working graphics, you should run > OpenBSD-current, not 6.4-release. What you did is try to plug in stuff from > -current into 6.4 which is huge gamble and I'm not surprised if the result > is weird. > > Just read the OpenBSD FAQ again for how to install -current. I would stop > experimenting like you've one until you understand the system much better > than now. >
Re: radeon driver bug?
On December 9, 2018 1:22:42 AM UTC, "岡本健二" wrote: >I found mesa-libs-18.1.9 for FreeBSD ports. >How can I get it without FreeBSD system? > >Kenji > > >2018年12月8日(土) 14:48 岡本健二 : > >> I installed Ubuntu 18.04 to a AMD 6450 graphic card, and played >> Jahshaka. It has mesa version 18.2, and runs Jahshaka very >> smoothly. >> >> The colors I reported before are same in this machine, so that >> report was not correct. >> >> Kenji >> >> 2018年12月7日(金) 11:09 岡本健二 : >> >>> I checked mesa-18.3.0 sources under src/gallium/drivers/r600 and >compared >>> with those >>> of xenocara. File names are all same, however, individual sizes are >very >>> different for >>> most of those, which would not permit me to copy those to >xenocara... >>> >>> Kenji >>> >>> >>> 2018年12月6日(木) 15:14 岡本健二 : >>> also, it stull has some bugs, because the colors of some parts are different from those of original ones. Kenji 2018年12月6日(木) 15:10 岡本健二 : > Sorry, I'm a novice to OpenBSD. > Yes, it's current branch of xenocara. > I updated my xenocara (stable) to that current, and build new >xenocara > here. > > Wow, it makes the Jahshaka works! > > However, it still has some bugs, because it moves and stop >suddenly and > then > move again. Whine the animation stops, the system seems to >halting... > > Anyway it makes much advance, I included the screenshot of it. > > Kenji > > PS: sorry tfrohwein, this is doubled to you > > 2018年12月6日(木) 13:26 岡本健二 : > >> in-current means stable 6.4? >> >> Kenji >> >> 2018年12月5日(水) 23:58 tfrohw...@fastmail.com >: >> >>> On December 5, 2018 9:41:44 AM UTC, "岡本健二" >>> wrote: >>> >This errors come from >>> >>/usr/xenocara/lib/mesa/src/gallium/drivers/r600/r600_state_common.c. >>> >The mesa version of OpenBSD6.4 is 13.0.6. >>> >I'm running this Jahshaka on Ubutu 18.04, where the mesa >version is >>> >18.x. >>> > >>> >So, it may be the mesa problem... >>> > >>> >Kenji >>> > >>> > >>> >2018年12月4日(火) 16:19 岡本健二 : >>> > >>> >> I'm using AMD HD6450 graphic card which I reported before, >and >>> faced >>> >a >>> >> curious thing >>> >> during running Jahshaka Studio (dev version 7.03a). >>> >> To run Jahshaka on OpenBSD 6.4 I needed to delete google >breakpad >>> >> temporally, which >>> >> is not the problem now. >>> >> >>> >> After start to run 'Jahshaka Studio', I got start 3D >animation >>> sample >>> >> 'Skeletal Animation' data to load, then >>> >> I got many errors included below which seems to come from >radeon >>> drm >>> >> driver's bug to me. >>> >> If you interested please check it. >>> >> >>> >> Thanks in advance >>> >> >>> >> Kenji >>> >> >>> >> >>> >>> There's a known bug where the shader on r600 uses too many >registers: >>> >>> https://bugs.freedesktop.org/show_bug.cgi?id=99349 >>> >>> I encountered this bug with godot on a Radeon HD 7570, too, and >it >>> went away with the updated mesa that's in -current. >>> >> I think you are asking for way more than you (or most misc@ readers) can handle. Porting low-level libraries from FreeBSD is far from trivial. My advice remains: if you want working graphics, you should run OpenBSD-current, not 6.4-release. What you did is try to plug in stuff from -current into 6.4 which is huge gamble and I'm not surprised if the result is weird. Just read the OpenBSD FAQ again for how to install -current. I would stop experimenting like you've one until you understand the system much better than now.
Re: radeon driver bug?
I found mesa-libs-18.1.9 for FreeBSD ports. How can I get it without FreeBSD system? Kenji 2018年12月8日(土) 14:48 岡本健二 : > I installed Ubuntu 18.04 to a AMD 6450 graphic card, and played > Jahshaka. It has mesa version 18.2, and runs Jahshaka very > smoothly. > > The colors I reported before are same in this machine, so that > report was not correct. > > Kenji > > 2018年12月7日(金) 11:09 岡本健二 : > >> I checked mesa-18.3.0 sources under src/gallium/drivers/r600 and compared >> with those >> of xenocara. File names are all same, however, individual sizes are very >> different for >> most of those, which would not permit me to copy those to xenocara... >> >> Kenji >> >> >> 2018年12月6日(木) 15:14 岡本健二 : >> >>> also, it stull has some bugs, because the colors of some >>> parts are different from those of original ones. >>> >>> Kenji >>> >>> >>> 2018年12月6日(木) 15:10 岡本健二 : >>> Sorry, I'm a novice to OpenBSD. Yes, it's current branch of xenocara. I updated my xenocara (stable) to that current, and build new xenocara here. Wow, it makes the Jahshaka works! However, it still has some bugs, because it moves and stop suddenly and then move again. Whine the animation stops, the system seems to halting... Anyway it makes much advance, I included the screenshot of it. Kenji PS: sorry tfrohwein, this is doubled to you 2018年12月6日(木) 13:26 岡本健二 : > in-current means stable 6.4? > > Kenji > > 2018年12月5日(水) 23:58 tfrohw...@fastmail.com : > >> On December 5, 2018 9:41:44 AM UTC, "岡本健二" >> wrote: >> >This errors come from >> >/usr/xenocara/lib/mesa/src/gallium/drivers/r600/r600_state_common.c. >> >The mesa version of OpenBSD6.4 is 13.0.6. >> >I'm running this Jahshaka on Ubutu 18.04, where the mesa version is >> >18.x. >> > >> >So, it may be the mesa problem... >> > >> >Kenji >> > >> > >> >2018年12月4日(火) 16:19 岡本健二 : >> > >> >> I'm using AMD HD6450 graphic card which I reported before, and >> faced >> >a >> >> curious thing >> >> during running Jahshaka Studio (dev version 7.03a). >> >> To run Jahshaka on OpenBSD 6.4 I needed to delete google breakpad >> >> temporally, which >> >> is not the problem now. >> >> >> >> After start to run 'Jahshaka Studio', I got start 3D animation >> sample >> >> 'Skeletal Animation' data to load, then >> >> I got many errors included below which seems to come from radeon >> drm >> >> driver's bug to me. >> >> If you interested please check it. >> >> >> >> Thanks in advance >> >> >> >> Kenji >> >> >> >> >> >> There's a known bug where the shader on r600 uses too many registers: >> >> https://bugs.freedesktop.org/show_bug.cgi?id=99349 >> >> I encountered this bug with godot on a Radeon HD 7570, too, and it >> went away with the updated mesa that's in -current. >> >
Re: radeon driver bug?
I installed Ubuntu 18.04 to a AMD 6450 graphic card, and played Jahshaka. It has mesa version 18.2, and runs Jahshaka very smoothly. The colors I reported before are same in this machine, so that report was not correct. Kenji 2018年12月7日(金) 11:09 岡本健二 : > I checked mesa-18.3.0 sources under src/gallium/drivers/r600 and compared > with those > of xenocara. File names are all same, however, individual sizes are very > different for > most of those, which would not permit me to copy those to xenocara... > > Kenji > > > 2018年12月6日(木) 15:14 岡本健二 : > >> also, it stull has some bugs, because the colors of some >> parts are different from those of original ones. >> >> Kenji >> >> >> 2018年12月6日(木) 15:10 岡本健二 : >> >>> Sorry, I'm a novice to OpenBSD. >>> Yes, it's current branch of xenocara. >>> I updated my xenocara (stable) to that current, and build new xenocara >>> here. >>> >>> Wow, it makes the Jahshaka works! >>> >>> However, it still has some bugs, because it moves and stop suddenly and >>> then >>> move again. Whine the animation stops, the system seems to halting... >>> >>> Anyway it makes much advance, I included the screenshot of it. >>> >>> Kenji >>> >>> PS: sorry tfrohwein, this is doubled to you >>> >>> 2018年12月6日(木) 13:26 岡本健二 : >>> in-current means stable 6.4? Kenji 2018年12月5日(水) 23:58 tfrohw...@fastmail.com : > On December 5, 2018 9:41:44 AM UTC, "岡本健二" wrote: > >This errors come from > >/usr/xenocara/lib/mesa/src/gallium/drivers/r600/r600_state_common.c. > >The mesa version of OpenBSD6.4 is 13.0.6. > >I'm running this Jahshaka on Ubutu 18.04, where the mesa version is > >18.x. > > > >So, it may be the mesa problem... > > > >Kenji > > > > > >2018年12月4日(火) 16:19 岡本健二 : > > > >> I'm using AMD HD6450 graphic card which I reported before, and faced > >a > >> curious thing > >> during running Jahshaka Studio (dev version 7.03a). > >> To run Jahshaka on OpenBSD 6.4 I needed to delete google breakpad > >> temporally, which > >> is not the problem now. > >> > >> After start to run 'Jahshaka Studio', I got start 3D animation > sample > >> 'Skeletal Animation' data to load, then > >> I got many errors included below which seems to come from radeon drm > >> driver's bug to me. > >> If you interested please check it. > >> > >> Thanks in advance > >> > >> Kenji > >> > >> > > There's a known bug where the shader on r600 uses too many registers: > > https://bugs.freedesktop.org/show_bug.cgi?id=99349 > > I encountered this bug with godot on a Radeon HD 7570, too, and it > went away with the updated mesa that's in -current. >
Re: radeon driver bug?
I checked mesa-18.3.0 sources under src/gallium/drivers/r600 and compared with those of xenocara. File names are all same, however, individual sizes are very different for most of those, which would not permit me to copy those to xenocara... Kenji 2018年12月6日(木) 15:14 岡本健二 : > also, it stull has some bugs, because the colors of some > parts are different from those of original ones. > > Kenji > > > 2018年12月6日(木) 15:10 岡本健二 : > >> Sorry, I'm a novice to OpenBSD. >> Yes, it's current branch of xenocara. >> I updated my xenocara (stable) to that current, and build new xenocara >> here. >> >> Wow, it makes the Jahshaka works! >> >> However, it still has some bugs, because it moves and stop suddenly and >> then >> move again. Whine the animation stops, the system seems to halting... >> >> Anyway it makes much advance, I included the screenshot of it. >> >> Kenji >> >> PS: sorry tfrohwein, this is doubled to you >> >> 2018年12月6日(木) 13:26 岡本健二 : >> >>> in-current means stable 6.4? >>> >>> Kenji >>> >>> 2018年12月5日(水) 23:58 tfrohw...@fastmail.com : >>> On December 5, 2018 9:41:44 AM UTC, "岡本健二" wrote: >This errors come from >/usr/xenocara/lib/mesa/src/gallium/drivers/r600/r600_state_common.c. >The mesa version of OpenBSD6.4 is 13.0.6. >I'm running this Jahshaka on Ubutu 18.04, where the mesa version is >18.x. > >So, it may be the mesa problem... > >Kenji > > >2018年12月4日(火) 16:19 岡本健二 : > >> I'm using AMD HD6450 graphic card which I reported before, and faced >a >> curious thing >> during running Jahshaka Studio (dev version 7.03a). >> To run Jahshaka on OpenBSD 6.4 I needed to delete google breakpad >> temporally, which >> is not the problem now. >> >> After start to run 'Jahshaka Studio', I got start 3D animation sample >> 'Skeletal Animation' data to load, then >> I got many errors included below which seems to come from radeon drm >> driver's bug to me. >> If you interested please check it. >> >> Thanks in advance >> >> Kenji >> >> There's a known bug where the shader on r600 uses too many registers: https://bugs.freedesktop.org/show_bug.cgi?id=99349 I encountered this bug with godot on a Radeon HD 7570, too, and it went away with the updated mesa that's in -current. >>>
Re: radeon driver bug?
I'm using acme also on OpenBSD. I don't know any better editor than that. Of course, where acme cannot use, such as cui only, I use ed. Kenji 2018年12月6日(木) 21:38 Chris Bennett : > On Thu, Dec 06, 2018 at 01:26:12PM +0900, 岡本健二 wrote: > > in-current means stable 6.4? > > > > No. Look in the FAQ. Look at the running -current page > Look at what release -> stable is. > > Run -current only if you need something new, are developing base/ports > or wish to help test the software/hardware being developed. > It is not always stable. It could have new security problems temporarily > before those changes are fixed or pulled out. > > However, OpenBSD runs ports and base code as a unit. You cannot run > current without making your current up to date and using the latest > version of ports/packages. Unless you find a nice spot and just stay > there. > > OpenBSD is not a jumbled mess of code all over the place. It's one of > many reasons that it has fewer bugs -> better security. Also, security > specific methods are always under active development. > > Please read the entire FAQ and PF Guide. Please read all of the man > pages for any commands you need to use or are interested in. > > Please learn what you can do with boot -s or boot -c. You will at some > point need to use them. Search the mailing list archives for interesting > topics. Figure out how to handle the filesystem when it gets hosed > during a power failure. Figure out how to arrange your disklabel at > install to let you use growfs. > > I also suggest that you learn to use ed. It's not hard to use, but it's > really, really old. It's still actively maintained because it's 100% > worth having. > > The command line is so powerful once you learn to use it. We don't want > GUI interfaces for this stuff because we expect you to truly learn what > to do and why. > > Have a good day, > Chris Bennett > > >
Re: radeon driver bug?
On Thu, Dec 06, 2018 at 01:26:12PM +0900, 岡本健二 wrote: > in-current means stable 6.4? > No. Look in the FAQ. Look at the running -current page Look at what release -> stable is. Run -current only if you need something new, are developing base/ports or wish to help test the software/hardware being developed. It is not always stable. It could have new security problems temporarily before those changes are fixed or pulled out. However, OpenBSD runs ports and base code as a unit. You cannot run current without making your current up to date and using the latest version of ports/packages. Unless you find a nice spot and just stay there. OpenBSD is not a jumbled mess of code all over the place. It's one of many reasons that it has fewer bugs -> better security. Also, security specific methods are always under active development. Please read the entire FAQ and PF Guide. Please read all of the man pages for any commands you need to use or are interested in. Please learn what you can do with boot -s or boot -c. You will at some point need to use them. Search the mailing list archives for interesting topics. Figure out how to handle the filesystem when it gets hosed during a power failure. Figure out how to arrange your disklabel at install to let you use growfs. I also suggest that you learn to use ed. It's not hard to use, but it's really, really old. It's still actively maintained because it's 100% worth having. The command line is so powerful once you learn to use it. We don't want GUI interfaces for this stuff because we expect you to truly learn what to do and why. Have a good day, Chris Bennett
Re: radeon driver bug?
also, it stull has some bugs, because the colors of some parts are different from those of original ones. Kenji 2018年12月6日(木) 15:10 岡本健二 : > Sorry, I'm a novice to OpenBSD. > Yes, it's current branch of xenocara. > I updated my xenocara (stable) to that current, and build new xenocara > here. > > Wow, it makes the Jahshaka works! > > However, it still has some bugs, because it moves and stop suddenly and > then > move again. Whine the animation stops, the system seems to halting... > > Anyway it makes much advance, I included the screenshot of it. > > Kenji > > PS: sorry tfrohwein, this is doubled to you > > 2018年12月6日(木) 13:26 岡本健二 : > >> in-current means stable 6.4? >> >> Kenji >> >> 2018年12月5日(水) 23:58 tfrohw...@fastmail.com : >> >>> On December 5, 2018 9:41:44 AM UTC, "岡本健二" wrote: >>> >This errors come from >>> >/usr/xenocara/lib/mesa/src/gallium/drivers/r600/r600_state_common.c. >>> >The mesa version of OpenBSD6.4 is 13.0.6. >>> >I'm running this Jahshaka on Ubutu 18.04, where the mesa version is >>> >18.x. >>> > >>> >So, it may be the mesa problem... >>> > >>> >Kenji >>> > >>> > >>> >2018年12月4日(火) 16:19 岡本健二 : >>> > >>> >> I'm using AMD HD6450 graphic card which I reported before, and faced >>> >a >>> >> curious thing >>> >> during running Jahshaka Studio (dev version 7.03a). >>> >> To run Jahshaka on OpenBSD 6.4 I needed to delete google breakpad >>> >> temporally, which >>> >> is not the problem now. >>> >> >>> >> After start to run 'Jahshaka Studio', I got start 3D animation sample >>> >> 'Skeletal Animation' data to load, then >>> >> I got many errors included below which seems to come from radeon drm >>> >> driver's bug to me. >>> >> If you interested please check it. >>> >> >>> >> Thanks in advance >>> >> >>> >> Kenji >>> >> >>> >> >>> >>> There's a known bug where the shader on r600 uses too many registers: >>> >>> https://bugs.freedesktop.org/show_bug.cgi?id=99349 >>> >>> I encountered this bug with godot on a Radeon HD 7570, too, and it went >>> away with the updated mesa that's in -current. >>> >>
Re: radeon driver bug?
in-current means stable 6.4? Kenji 2018年12月5日(水) 23:58 tfrohw...@fastmail.com : > On December 5, 2018 9:41:44 AM UTC, "岡本健二" wrote: > >This errors come from > >/usr/xenocara/lib/mesa/src/gallium/drivers/r600/r600_state_common.c. > >The mesa version of OpenBSD6.4 is 13.0.6. > >I'm running this Jahshaka on Ubutu 18.04, where the mesa version is > >18.x. > > > >So, it may be the mesa problem... > > > >Kenji > > > > > >2018年12月4日(火) 16:19 岡本健二 : > > > >> I'm using AMD HD6450 graphic card which I reported before, and faced > >a > >> curious thing > >> during running Jahshaka Studio (dev version 7.03a). > >> To run Jahshaka on OpenBSD 6.4 I needed to delete google breakpad > >> temporally, which > >> is not the problem now. > >> > >> After start to run 'Jahshaka Studio', I got start 3D animation sample > >> 'Skeletal Animation' data to load, then > >> I got many errors included below which seems to come from radeon drm > >> driver's bug to me. > >> If you interested please check it. > >> > >> Thanks in advance > >> > >> Kenji > >> > >> > > There's a known bug where the shader on r600 uses too many registers: > > https://bugs.freedesktop.org/show_bug.cgi?id=99349 > > I encountered this bug with godot on a Radeon HD 7570, too, and it went > away with the updated mesa that's in -current. >
Re: radeon driver bug?
On December 5, 2018 9:41:44 AM UTC, "岡本健二" wrote: >This errors come from >/usr/xenocara/lib/mesa/src/gallium/drivers/r600/r600_state_common.c. >The mesa version of OpenBSD6.4 is 13.0.6. >I'm running this Jahshaka on Ubutu 18.04, where the mesa version is >18.x. > >So, it may be the mesa problem... > >Kenji > > >2018年12月4日(火) 16:19 岡本健二 : > >> I'm using AMD HD6450 graphic card which I reported before, and faced >a >> curious thing >> during running Jahshaka Studio (dev version 7.03a). >> To run Jahshaka on OpenBSD 6.4 I needed to delete google breakpad >> temporally, which >> is not the problem now. >> >> After start to run 'Jahshaka Studio', I got start 3D animation sample >> 'Skeletal Animation' data to load, then >> I got many errors included below which seems to come from radeon drm >> driver's bug to me. >> If you interested please check it. >> >> Thanks in advance >> >> Kenji >> >> There's a known bug where the shader on r600 uses too many registers: https://bugs.freedesktop.org/show_bug.cgi?id=99349 I encountered this bug with godot on a Radeon HD 7570, too, and it went away with the updated mesa that's in -current.
Re: radeon driver bug?
This errors come from /usr/xenocara/lib/mesa/src/gallium/drivers/r600/r600_state_common.c. The mesa version of OpenBSD6.4 is 13.0.6. I'm running this Jahshaka on Ubutu 18.04, where the mesa version is 18.x. So, it may be the mesa problem... Kenji 2018年12月4日(火) 16:19 岡本健二 : > I'm using AMD HD6450 graphic card which I reported before, and faced a > curious thing > during running Jahshaka Studio (dev version 7.03a). > To run Jahshaka on OpenBSD 6.4 I needed to delete google breakpad > temporally, which > is not the problem now. > > After start to run 'Jahshaka Studio', I got start 3D animation sample > 'Skeletal Animation' data to load, then > I got many errors included below which seems to come from radeon drm > driver's bug to me. > If you interested please check it. > > Thanks in advance > > Kenji > >
radeon driver bug?
I'm using AMD HD6450 graphic card which I reported before, and faced a curious thing during running Jahshaka Studio (dev version 7.03a). To run Jahshaka on OpenBSD 6.4 I needed to delete google breakpad temporally, which is not the problem now. After start to run 'Jahshaka Studio', I got start 3D animation sample 'Skeletal Animation' data to load, then I got many errors included below which seems to come from radeon drm driver's bug to me. If you interested please check it. Thanks in advance Kenji jahshaka Description: Binary data
