Re: [mythtv-users] USB IR receiver of choice
I am using ATI remote I picked up from newegg for $30 and it is quite good with LIRC.On 1/6/06, Nelson Tang <[EMAIL PROTECTED] > wrote:On 1/6/06, Rick <[EMAIL PROTECTED] > wrote:> Mike wrote:> > Apparently I'm the rear end of a donkey. I had a family member order two> > serial IR receivers from irblaster.info for his new Myth boxes, but > > neither of the computers have serial ports. (Go figure, it isn't 1992> > anymore.) I'd rather not throw more PCI cards in these boxes just to> > support yesteryear's technology, so are there any users out there that > > have recommendations for USB IR receivers that are easy to implement> > with lirc and myth?>> I use this USB to Serial Adapter with MyBlaster and it works without> problems. www.mytvstore.com/product_id_011.html>> It shows up as dev/ttyUSB0>> RickI can also recommend the Streamzap USB remote/receiver; it wastrivially simple to implement with lirc & myth (I use Gentoo, and it was just a matter of including a USE flag when emerging lirc). Ifound one at retail for $40 but got one from Amazon more recently for$29.--nelson___ mythtv-users mailing listmythtv-users@mythtv.orghttp://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Re: [mythtv-users] USB IR receiver of choice
On 1/6/06, Rick <[EMAIL PROTECTED]> wrote: > Mike wrote: > > Apparently I'm the rear end of a donkey. I had a family member order two > > serial IR receivers from irblaster.info for his new Myth boxes, but > > neither of the computers have serial ports. (Go figure, it isn't 1992 > > anymore.) I'd rather not throw more PCI cards in these boxes just to > > support yesteryear's technology, so are there any users out there that > > have recommendations for USB IR receivers that are easy to implement > > with lirc and myth? > > I use this USB to Serial Adapter with MyBlaster and it works without > problems. www.mytvstore.com/product_id_011.html > > It shows up as dev/ttyUSB0 > > Rick I can also recommend the Streamzap USB remote/receiver; it was trivially simple to implement with lirc & myth (I use Gentoo, and it was just a matter of including a USE flag when emerging lirc). I found one at retail for $40 but got one from Amazon more recently for $29. --nelson ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Re: [mythtv-users] USB IR receiver of choice
Mike wrote: Apparently I'm the rear end of a donkey. I had a family member order two serial IR receivers from irblaster.info for his new Myth boxes, but neither of the computers have serial ports. (Go figure, it isn't 1992 anymore.) I'd rather not throw more PCI cards in these boxes just to support yesteryear's technology, so are there any users out there that have recommendations for USB IR receivers that are easy to implement with lirc and myth? I use this USB to Serial Adapter with MyBlaster and it works without problems. www.mytvstore.com/product_id_011.html It shows up as dev/ttyUSB0 Rick ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Re: [mythtv-users] USB IR receiver of choice
Mike wrote: Apparently I'm the rear end of a donkey. I had a family member order two serial IR receivers from irblaster.info for his new Myth boxes, but neither of the computers have serial ports. (Go figure, it isn't 1992 anymore.) I'd rather not throw more PCI cards in these boxes just to support yesteryear's technology, so are there any users out there that have recommendations for USB IR receivers that are easy to implement with lirc and myth? I like the USB IR receivers from the Streamzap remote. Work great with my universal remote. You can order them without the remote if you email the sales department for a part number (unless they have them on their website separate now). Kevin ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Re: [mythtv-users] USB IR Receiver
Well, I've held off on this, but I'll give my $.02 worth I guess. If you have a USB receiver which you really love, then the rest of this post is moot, so please feel free to delete it. For me though, it was very hard getting a USB receiver to work and trying to use Jarod's Guide. *Sidebar to give props where It needs to be given, Jarod's guide probably saved me DAYS (if not weeks) of messing around with other stuff, just to get anything going at all... The guide is a God-send* To the point though, what I would recommend is getting all the way to that point, getting a streamzap remote (thinkgeek.com) and doing the following: First make sure you have the source modules... there's a .src rpm from Axel's site... Install the streamzap remote receiver. Then do this: rpm -e kernel-source (In case you found the complete source somewhere else like I did, and apparently don't need) cd /usr/src ln -s /lib/modules/`uname -r`/build linux-`uname -r` Now you can compile some modules! Follow the guide here: http://www.grangenet.net/~greg/streamzap.html >From the guide I would recommend downloading the tar file and the patch and following the directions from there... I didn't use the CVS. The CVS may have the streamzap remote built in already, making the patch unnecessary, but I know this worked, so I skipped CVS. After you've ran the make install part (The End). add these 2 lines to your /etc/modprobe.conf # lirc_streamzapusb module alias char-major-61 lirc_streamzapusb Now, after I loaded it, it created a /dev/lirc0, but no /dev/lirc, so I did the ln -s /dev/lirc0 /dev/lirc After that, starting up the software from /usr/local/sbin/lircd -n worked like a champ. You can now start up /usr/local/bin/irw, and test the remote that comes with the entire setup. Just start lircd from the S99local script /usr/local/sbin/lircd -n & I'm still working out my lircrc, but it's functional for the most part (If you want a copy, email me off list, I'll send it to you) Oh, and credit for putting me on to this goes to Kevin Kuphal... who is also on this list. Thanks much. This is by far and away the easiest remote and receiver to deal with (for me at least). Of course, there's lots of people around who may disagree I'm sure, but I didn't want to fight it too hard, and this became an easy solution. The Receiver cable is also very long, but the receiver itself is pretty small. If I had one "bad" thing to say about it, it would be that the remote is kinda' light, but for me, it's a non-issue. -Tu --- Jim Oltman <[EMAIL PROTECTED]> wrote: > These are the lines from Jarod's Guide I am using to > grab lirc: > > # apt-get install lirc-kmdl-$KVER > # apt-get install lirc > > So you are saying there is a specific lirc-kmdl... > for USB? I can > start the LIRC daemon without problems...but I > really need to know how > to setup the USB receiver and where I should get > these packages from. > Thanks! > __ Celebrate Yahoo!'s 10th Birthday! Yahoo! Netrospective: 100 Moments of the Web http://birthday.yahoo.com/netrospective/ ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Re: [mythtv-users] USB IR Receiver
Great. Thanks Vlad! On Wed, 9 Mar 2005 10:36:38 -0700, Vladimir Shved <[EMAIL PROTECTED]> wrote: > Check USB UIRT support forums in Dev section and LIRC mail list for help on > that. LIRCs documenation has instructions on how to compile it. > > USB UIRT forums: > http://166.70.183.44/phpBB2/ > LIRC Documentation: > http://www.lirc.org/html/index.html > LIRC mail list sign up here: > http://lists.sourceforge.net/lists/listinfo/lirc-list > LIRC mail list archives: > http://sourceforge.net/mailarchive/forum.php?forum=lirc-list > > > > -Original Message- > > From: [EMAIL PROTECTED] [mailto:mythtv-users- > > [EMAIL PROTECTED] On Behalf Of Jim Oltman > > Sent: Wednesday, March 09, 2005 10:28 AM > > To: Discussion about mythtv > > Subject: Re: [mythtv-users] USB IR Receiver > > > > Here I go again sounding like an idiot. I have no idea how to do > > that. But from what it sounds like, I am going to have to uninstall > > LIRC via apt, then grab the source for LIRC...and patch that > > somehow...and then compile it all the while crossing my fingers hoping > > it works. Correct? Anywhere you could point me to start the process? > > > > > > On Wed, 9 Mar 2005 10:24:53 -0700, Vladimir Shved > > <[EMAIL PROTECTED]> wrote: > > > There are no known packages that work with USB UIRT out of the box, you > > have > > > to compile LIRC by yourself. > > > > > > > -Original Message- > > > > From: [EMAIL PROTECTED] [mailto:mythtv-users- > > > > [EMAIL PROTECTED] On Behalf Of Jim Oltman > > > > Sent: Wednesday, March 09, 2005 10:20 AM > > > > To: Discussion about mythtv > > > > Subject: Re: [mythtv-users] USB IR Receiver > > > > > > > > These are the lines from Jarod's Guide I am using to grab lirc: > > > > > > > > # apt-get install lirc-kmdl-$KVER > > > > # apt-get install lirc > > > > > > > > So you are saying there is a specific lirc-kmdl... for USB? I can > > > > start the LIRC daemon without problems...but I really need to know how > > > > to setup the USB receiver and where I should get these packages from. > > > > Thanks! > > > > > > > > > > > > On Tue, 8 Mar 2005 11:11:31 -0700, Vladimir Shved > > > > <[EMAIL PROTECTED]> wrote: > > > > > You don't need any LIRC modules, lirc_serial is for com port IR > > devices, > > > > you > > > > > need kernel driver module(forgot its name) for USB UIRT and actual > > LIRC > > > > > daemon(lircd) needs to start on startup(need script in /etc/init.d > > and > > > > link > > > > > to it like from /etc/rc2.d etc.). Actual LIRC must have USB UIRT > > > > support, > > > > > you need to build LIRC from sources, I'm not sure if there are any > > > > binaries > > > > > exists that support USB UIRT. When building from sources, either you > > > > need > > > > > patch or get latest CVS sources. I did not try CVS but I've read > > > > somewhere > > > > > that USB UIRT made to CVS, so it has to be supported. Check USB UIRT > > > > support > > > > > forums, LIRC mail list for more info. > > > > > > > > > > > -Original Message- > > > > > > From: [EMAIL PROTECTED] [mailto:mythtv-users- > > > > > > [EMAIL PROTECTED] On Behalf Of Jim Oltman > > > > > > Sent: Tuesday, March 08, 2005 10:57 AM > > > > > > To: Discussion about mythtv > > > > > > Subject: Re: [mythtv-users] USB IR Receiver > > > > > > > > > > > > But what are the lines that I will need in my modprobe.conf? This > > is > > > > > > what I have so far in it (from Jarod's guide) > > > > > > > > > > > > alias char-major-61 lirc_serial > > > > > > options lirc_serial irq=4 io=0x3f8 > > > > > > install lirc_serial /bin/setserial /dev/ttyS0 uart none ;\ > > > > > > /sbin/modprobe --ignore-install lirc_serial > > > > > > > > > > > > Instead of lirc_serial, will it be lirc_usb? I have no idea. > > Thanks! > > > > > > > > > > > > > > > ___ > > > > > mythtv-users mailing list > > > > > mythtv-users@mythtv.org > > > > > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > > > > > > > > > > > > > > > > > > > > > > > > ___ > > > mythtv-users mailing list > > > mythtv-users@mythtv.org > > > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > > > > > > > > > > > > ___ > mythtv-users mailing list > mythtv-users@mythtv.org > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > > > ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
RE: [mythtv-users] USB IR Receiver
Check USB UIRT support forums in Dev section and LIRC mail list for help on that. LIRCs documenation has instructions on how to compile it. USB UIRT forums: http://166.70.183.44/phpBB2/ LIRC Documentation: http://www.lirc.org/html/index.html LIRC mail list sign up here: http://lists.sourceforge.net/lists/listinfo/lirc-list LIRC mail list archives: http://sourceforge.net/mailarchive/forum.php?forum=lirc-list > -Original Message- > From: [EMAIL PROTECTED] [mailto:mythtv-users- > [EMAIL PROTECTED] On Behalf Of Jim Oltman > Sent: Wednesday, March 09, 2005 10:28 AM > To: Discussion about mythtv > Subject: Re: [mythtv-users] USB IR Receiver > > Here I go again sounding like an idiot. I have no idea how to do > that. But from what it sounds like, I am going to have to uninstall > LIRC via apt, then grab the source for LIRC...and patch that > somehow...and then compile it all the while crossing my fingers hoping > it works. Correct? Anywhere you could point me to start the process? > > > On Wed, 9 Mar 2005 10:24:53 -0700, Vladimir Shved > <[EMAIL PROTECTED]> wrote: > > There are no known packages that work with USB UIRT out of the box, you > have > > to compile LIRC by yourself. > > > > > -Original Message- > > > From: [EMAIL PROTECTED] [mailto:mythtv-users- > > > [EMAIL PROTECTED] On Behalf Of Jim Oltman > > > Sent: Wednesday, March 09, 2005 10:20 AM > > > To: Discussion about mythtv > > > Subject: Re: [mythtv-users] USB IR Receiver > > > > > > These are the lines from Jarod's Guide I am using to grab lirc: > > > > > > # apt-get install lirc-kmdl-$KVER > > > # apt-get install lirc > > > > > > So you are saying there is a specific lirc-kmdl... for USB? I can > > > start the LIRC daemon without problems...but I really need to know how > > > to setup the USB receiver and where I should get these packages from. > > > Thanks! > > > > > > > > > On Tue, 8 Mar 2005 11:11:31 -0700, Vladimir Shved > > > <[EMAIL PROTECTED]> wrote: > > > > You don't need any LIRC modules, lirc_serial is for com port IR > devices, > > > you > > > > need kernel driver module(forgot its name) for USB UIRT and actual > LIRC > > > > daemon(lircd) needs to start on startup(need script in /etc/init.d > and > > > link > > > > to it like from /etc/rc2.d etc.). Actual LIRC must have USB UIRT > > > support, > > > > you need to build LIRC from sources, I'm not sure if there are any > > > binaries > > > > exists that support USB UIRT. When building from sources, either you > > > need > > > > patch or get latest CVS sources. I did not try CVS but I've read > > > somewhere > > > > that USB UIRT made to CVS, so it has to be supported. Check USB UIRT > > > support > > > > forums, LIRC mail list for more info. > > > > > > > > > -Original Message- > > > > > From: [EMAIL PROTECTED] [mailto:mythtv-users- > > > > > [EMAIL PROTECTED] On Behalf Of Jim Oltman > > > > > Sent: Tuesday, March 08, 2005 10:57 AM > > > > > To: Discussion about mythtv > > > > > Subject: Re: [mythtv-users] USB IR Receiver > > > > > > > > > > But what are the lines that I will need in my modprobe.conf? This > is > > > > > what I have so far in it (from Jarod's guide) > > > > > > > > > > alias char-major-61 lirc_serial > > > > > options lirc_serial irq=4 io=0x3f8 > > > > > install lirc_serial /bin/setserial /dev/ttyS0 uart none ;\ > > > > > /sbin/modprobe --ignore-install lirc_serial > > > > > > > > > > Instead of lirc_serial, will it be lirc_usb? I have no idea. > Thanks! > > > > > > > > > > > > ___ > > > > mythtv-users mailing list > > > > mythtv-users@mythtv.org > > > > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > > > > > > > > > > > > > > > > > > ___ > > mythtv-users mailing list > > mythtv-users@mythtv.org > > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > > > > > > ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Re: [mythtv-users] USB IR Receiver
Here I go again sounding like an idiot. I have no idea how to do that. But from what it sounds like, I am going to have to uninstall LIRC via apt, then grab the source for LIRC...and patch that somehow...and then compile it all the while crossing my fingers hoping it works. Correct? Anywhere you could point me to start the process? On Wed, 9 Mar 2005 10:24:53 -0700, Vladimir Shved <[EMAIL PROTECTED]> wrote: > There are no known packages that work with USB UIRT out of the box, you have > to compile LIRC by yourself. > > > -Original Message- > > From: [EMAIL PROTECTED] [mailto:mythtv-users- > > [EMAIL PROTECTED] On Behalf Of Jim Oltman > > Sent: Wednesday, March 09, 2005 10:20 AM > > To: Discussion about mythtv > > Subject: Re: [mythtv-users] USB IR Receiver > > > > These are the lines from Jarod's Guide I am using to grab lirc: > > > > # apt-get install lirc-kmdl-$KVER > > # apt-get install lirc > > > > So you are saying there is a specific lirc-kmdl... for USB? I can > > start the LIRC daemon without problems...but I really need to know how > > to setup the USB receiver and where I should get these packages from. > > Thanks! > > > > > > On Tue, 8 Mar 2005 11:11:31 -0700, Vladimir Shved > > <[EMAIL PROTECTED]> wrote: > > > You don't need any LIRC modules, lirc_serial is for com port IR devices, > > you > > > need kernel driver module(forgot its name) for USB UIRT and actual LIRC > > > daemon(lircd) needs to start on startup(need script in /etc/init.d and > > link > > > to it like from /etc/rc2.d etc.). Actual LIRC must have USB UIRT > > support, > > > you need to build LIRC from sources, I'm not sure if there are any > > binaries > > > exists that support USB UIRT. When building from sources, either you > > need > > > patch or get latest CVS sources. I did not try CVS but I've read > > somewhere > > > that USB UIRT made to CVS, so it has to be supported. Check USB UIRT > > support > > > forums, LIRC mail list for more info. > > > > > > > -Original Message- > > > > From: [EMAIL PROTECTED] [mailto:mythtv-users- > > > > [EMAIL PROTECTED] On Behalf Of Jim Oltman > > > > Sent: Tuesday, March 08, 2005 10:57 AM > > > > To: Discussion about mythtv > > > > Subject: Re: [mythtv-users] USB IR Receiver > > > > > > > > But what are the lines that I will need in my modprobe.conf? This is > > > > what I have so far in it (from Jarod's guide) > > > > > > > > alias char-major-61 lirc_serial > > > > options lirc_serial irq=4 io=0x3f8 > > > > install lirc_serial /bin/setserial /dev/ttyS0 uart none ;\ > > > > /sbin/modprobe --ignore-install lirc_serial > > > > > > > > Instead of lirc_serial, will it be lirc_usb? I have no idea. Thanks! > > > > > > > > > ___ > > > mythtv-users mailing list > > > mythtv-users@mythtv.org > > > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > > > > > > > > > > > > ___ > mythtv-users mailing list > mythtv-users@mythtv.org > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > > > ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
RE: [mythtv-users] USB IR Receiver
There are no known packages that work with USB UIRT out of the box, you have to compile LIRC by yourself. > -Original Message- > From: [EMAIL PROTECTED] [mailto:mythtv-users- > [EMAIL PROTECTED] On Behalf Of Jim Oltman > Sent: Wednesday, March 09, 2005 10:20 AM > To: Discussion about mythtv > Subject: Re: [mythtv-users] USB IR Receiver > > These are the lines from Jarod's Guide I am using to grab lirc: > > # apt-get install lirc-kmdl-$KVER > # apt-get install lirc > > So you are saying there is a specific lirc-kmdl... for USB? I can > start the LIRC daemon without problems...but I really need to know how > to setup the USB receiver and where I should get these packages from. > Thanks! > > > On Tue, 8 Mar 2005 11:11:31 -0700, Vladimir Shved > <[EMAIL PROTECTED]> wrote: > > You don't need any LIRC modules, lirc_serial is for com port IR devices, > you > > need kernel driver module(forgot its name) for USB UIRT and actual LIRC > > daemon(lircd) needs to start on startup(need script in /etc/init.d and > link > > to it like from /etc/rc2.d etc.). Actual LIRC must have USB UIRT > support, > > you need to build LIRC from sources, I'm not sure if there are any > binaries > > exists that support USB UIRT. When building from sources, either you > need > > patch or get latest CVS sources. I did not try CVS but I've read > somewhere > > that USB UIRT made to CVS, so it has to be supported. Check USB UIRT > support > > forums, LIRC mail list for more info. > > > > > -Original Message- > > > From: [EMAIL PROTECTED] [mailto:mythtv-users- > > > [EMAIL PROTECTED] On Behalf Of Jim Oltman > > > Sent: Tuesday, March 08, 2005 10:57 AM > > > To: Discussion about mythtv > > > Subject: Re: [mythtv-users] USB IR Receiver > > > > > > But what are the lines that I will need in my modprobe.conf? This is > > > what I have so far in it (from Jarod's guide) > > > > > > alias char-major-61 lirc_serial > > > options lirc_serial irq=4 io=0x3f8 > > > install lirc_serial /bin/setserial /dev/ttyS0 uart none ;\ > > > /sbin/modprobe --ignore-install lirc_serial > > > > > > Instead of lirc_serial, will it be lirc_usb? I have no idea. Thanks! > > > > > > ___ > > mythtv-users mailing list > > mythtv-users@mythtv.org > > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > > > > > > ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Re: [mythtv-users] USB IR Receiver
These are the lines from Jarod's Guide I am using to grab lirc: # apt-get install lirc-kmdl-$KVER # apt-get install lirc So you are saying there is a specific lirc-kmdl... for USB? I can start the LIRC daemon without problems...but I really need to know how to setup the USB receiver and where I should get these packages from. Thanks! On Tue, 8 Mar 2005 11:11:31 -0700, Vladimir Shved <[EMAIL PROTECTED]> wrote: > You don't need any LIRC modules, lirc_serial is for com port IR devices, you > need kernel driver module(forgot its name) for USB UIRT and actual LIRC > daemon(lircd) needs to start on startup(need script in /etc/init.d and link > to it like from /etc/rc2.d etc.). Actual LIRC must have USB UIRT support, > you need to build LIRC from sources, I'm not sure if there are any binaries > exists that support USB UIRT. When building from sources, either you need > patch or get latest CVS sources. I did not try CVS but I've read somewhere > that USB UIRT made to CVS, so it has to be supported. Check USB UIRT support > forums, LIRC mail list for more info. > > > -Original Message- > > From: [EMAIL PROTECTED] [mailto:mythtv-users- > > [EMAIL PROTECTED] On Behalf Of Jim Oltman > > Sent: Tuesday, March 08, 2005 10:57 AM > > To: Discussion about mythtv > > Subject: Re: [mythtv-users] USB IR Receiver > > > > But what are the lines that I will need in my modprobe.conf? This is > > what I have so far in it (from Jarod's guide) > > > > alias char-major-61 lirc_serial > > options lirc_serial irq=4 io=0x3f8 > > install lirc_serial /bin/setserial /dev/ttyS0 uart none ;\ > > /sbin/modprobe --ignore-install lirc_serial > > > > Instead of lirc_serial, will it be lirc_usb? I have no idea. Thanks! > > > ___ > mythtv-users mailing list > mythtv-users@mythtv.org > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > > > ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
RE: [mythtv-users] USB IR Receiver
You don't need any LIRC modules, lirc_serial is for com port IR devices, you need kernel driver module(forgot its name) for USB UIRT and actual LIRC daemon(lircd) needs to start on startup(need script in /etc/init.d and link to it like from /etc/rc2.d etc.). Actual LIRC must have USB UIRT support, you need to build LIRC from sources, I'm not sure if there are any binaries exists that support USB UIRT. When building from sources, either you need patch or get latest CVS sources. I did not try CVS but I've read somewhere that USB UIRT made to CVS, so it has to be supported. Check USB UIRT support forums, LIRC mail list for more info. > -Original Message- > From: [EMAIL PROTECTED] [mailto:mythtv-users- > [EMAIL PROTECTED] On Behalf Of Jim Oltman > Sent: Tuesday, March 08, 2005 10:57 AM > To: Discussion about mythtv > Subject: Re: [mythtv-users] USB IR Receiver > > But what are the lines that I will need in my modprobe.conf? This is > what I have so far in it (from Jarod's guide) > > alias char-major-61 lirc_serial > options lirc_serial irq=4 io=0x3f8 > install lirc_serial /bin/setserial /dev/ttyS0 uart none ;\ > /sbin/modprobe --ignore-install lirc_serial > > Instead of lirc_serial, will it be lirc_usb? I have no idea. Thanks! ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Re: [mythtv-users] USB IR Receiver
But what are the lines that I will need in my modprobe.conf? This is what I have so far in it (from Jarod's guide) alias char-major-61 lirc_serial options lirc_serial irq=4 io=0x3f8 install lirc_serial /bin/setserial /dev/ttyS0 uart none ;\ /sbin/modprobe --ignore-install lirc_serial Instead of lirc_serial, will it be lirc_usb? I have no idea. Thanks! On Tue, 8 Mar 2005 10:35:37 -0700, Vladimir Shved <[EMAIL PROTECTED]> wrote: > > > > I was building a home-brew IR receiver. I finally got all the parts > > together and was soldering them up to the PCB board I got and it > > didn't work. Long story short, I want to use a USB IR receiver. > > Jarod has his MCE receiver working in his setup and I wanted to know > > how to go about doing that? Will it give a crazy dev listing that I > > will need to put into myth? Any help would be appreciated. Thanks! > > It works here with LIRC. > > > ___ > mythtv-users mailing list > mythtv-users@mythtv.org > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > > > ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
RE: [mythtv-users] USB IR Receiver
> I was building a home-brew IR receiver. I finally got all the parts > together and was soldering them up to the PCB board I got and it > didn't work. Long story short, I want to use a USB IR receiver. > Jarod has his MCE receiver working in his setup and I wanted to know > how to go about doing that? Will it give a crazy dev listing that I > will need to put into myth? Any help would be appreciated. Thanks! It works here with LIRC. ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users