[newbie] usb iomega cdrw
Hi I finally got Mandrake 9.0 to recognize the drive(I don't know how). What can I do to prevent it from not recognizing it again? Also, do I need to mount the drive so I can start using it? Thanks Dooggie Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] USB iomega cdrw
I am new to linux and I don't know how to use supermount. I am trying to convert from windows to linux, but very frustrating. Thanks in advance. Dooggie On Wednesday 26 November 2003 08:25 pm, Rob Blomquist wrote: On Wednesday 26 November 2003 4:44 pm, Dooggie wrote: Hi I finally got Mandrake 9.0 to recognize the drive(I don't know how). What can I do to prevent it from not recognizing it again? Also, do I need to mount the drive so I can start using it? It all depends on whether you are using supermount or not. If you are using supermount it will mount the drive when it is attached. Now, I also suggest that you learn to read the kernel messages in /var/log/messages by using the command tail -f /var/log/messages at a root command prompt. Now, disconnect the drive. You should see the USB system let go of the drive. Now, reconnect the drive, you should see it identify and grab the drive to use. The USB system for linux is not hard to use, so don't get freaked out. Rob Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] usb iomega cdrw
On Monday 24 November 2003 11:57 pm, Jerry Barton wrote: On Mon, 24 Nov 2003 20:06:53 -0500 Dooggie [EMAIL PROTECTED] wrote: hello i am having trouble installing my cdrw drive. when i plug it in and start the computer, it halts at finding dependencies. i am running mandrake 9.0 with kernel 2.4.21.0.13mdk. thanks My box always froze at finding module dependancies when booting. I waited a minute or so then hit the SysReq key and it continued (spitting out something about hwclock line such and such rc.sysinit. Something about my hardwareclock it doesn't like. I ended up having to comment out a section in rc.sysinit and halt otherwise it just plain refused to boot/shutdown cleanly. Just out of curiosity, what motherboard do you have? Mine's an ASUS A7V (amd 750 processor) Jerry I too have a ASUS A7V (amd duran processor)... I am very new to linux...where can I find rc.sysinit? Did that help? Are you able to use your cdrw? Dooggie Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] usb iomega cdrw
hello i am having trouble installing my cdrw drive. when i plug it in and start the computer, it halts at finding dependencies. i am running mandrake 9.0 with kernel 2.4.21.0.13mdk. thanks Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] network card
the card is a built in card ifup eth0 -- message: /sbin/ifup: config for eth0 not found. - Original Message - From: Dennis Myers [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Friday, November 07, 2003 10:59 PM Subject: Re: [newbie] network card On Friday 07 November 2003 09:44 pm, Dooggie wrote: error message: /sbin/insmod/lib/modules/2.4.19-16mdk/kernel/drivers/net/sis900.o.gz/lib/mo d ules/2.4.19-16mdk/kernel/drivers/net/sis900.o.gz: init_module: No such device. Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. - Original Message - From: Scott [EMAIL PROTECTED] To: Newbie list [EMAIL PROTECTED] Sent: Friday, November 07, 2003 10:24 PM Subject: Re: [newbie] network card On Fri, 2003-11-07 at 19:25, Dooggie wrote: I just installed 9.0 on my winxp. I'm having trouble connecting to the internet. Network card is recognized when it boots, but when I try to connect in mandrake console, it says no ethernet adapter detected. Mother board is asus A7S266-VM/U2 Ethernet card is sis900 Does 9.0 support this hardware? Do I need to upgrade to 9.2? Any help is greatful. Dooggie I'm running a sis900 card on 9.0 and it works just fine. Try doing as root: # modprobe -v sis900 and see what error messages you get. HTH Scott -- - - Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Where is the card mounted? Or is it a built in ethernet card? Looks like a possible IRQ conflict. So if it is a plugin card move it to a new PCI slot but not the one next to the AGP slot. If it is not a plugin card move one of your other cards or change a slot IRQ and see if the bugger comes up. You can do an ifup eth0 in a su console also and see what happens. HTH -- Dennis M. linux user #180842 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] network card
error message: bash: cat/proc/ioports: No file or directory pcilib: Cannot open /proc/bus/pci lspci: Cannot find any working access method - Original Message - From: Scott [EMAIL PROTECTED] To: Newbie list [EMAIL PROTECTED] Sent: Friday, November 07, 2003 11:04 PM Subject: Re: [newbie] network card On Fri, 2003-11-07 at 22:44, Dooggie wrote: error message: /sbin/insmod/lib/modules/2.4.19-16mdk/kernel/drivers/net/sis900.o.gz/lib/mod ules/2.4.19-16mdk/kernel/drivers/net/sis900.o.gz: init_module: No such device. Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. - Original Message - From: Scott [EMAIL PROTECTED] To: Newbie list [EMAIL PROTECTED] Sent: Friday, November 07, 2003 10:24 PM Subject: Re: [newbie] network card On Fri, 2003-11-07 at 19:25, Dooggie wrote: I just installed 9.0 on my winxp. I'm having trouble connecting to the internet. Network card is recognized when it boots, but when I try to connect in mandrake console, it says no ethernet adapter detected. Mother board is asus A7S266-VM/U2 Ethernet card is sis900 Does 9.0 support this hardware? Do I need to upgrade to 9.2? Any help is greatful. Dooggie I'm running a sis900 card on 9.0 and it works just fine. Try doing as root: # modprobe -v sis900 and see what error messages you get. HTH Scott -- -- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Please post the output of: cat /proc/ioports and lspci -v Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] network card
I just installed 9.0 on my winxp. I'm having trouble connecting to the internet. Network card is recognized when it boots, but when I try to connect in mandrake console, it says "no ethernet adapter detected." Mother board is asus A7S266-VM/U2 Ethernet card is sis900 Does 9.0 support this hardware? Do I need to upgrade to 9.2? Any help is greatful. Dooggie
Re: [newbie] network card
I used drakconnect it came up with this message: insmod /lib/modules/2.4.19-mdk/kernel/drivers/net/sis900.o.gz failed wizcancel at /usr/libDrakX/my-gtk.pm line 162 - Original Message - From: Kaj Haulrich [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Friday, November 07, 2003 8:37 PM Subject: Re: [newbie] network card On Saturday 08 November 2003 12:25 am, Dooggie wrote: I just installed 9.0 on my winxp. I'm having trouble connecting to the internet. Network card is recognized when it boots, but when I try to connect in mandrake console, it says no ethernet adapter detected. Mother board is asus A7S266-VM/U2 Ethernet card is sis900 Does 9.0 support this hardware? Do I need to upgrade to 9.2? Any help is greatful. Dooggie In your console, as root, type drakconnect. This launches the network wizard. Try that, and report back. Anyway, having a network card usually means that the system connects during the boot process. If that's not the case, try typing dmesg in a console, and study any errors concerning the network. HTH Kaj Haulrich. -- *This mail was sent from a 100 % Microsoft free computer* Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] network card
error message: /sbin/insmod/lib/modules/2.4.19-16mdk/kernel/drivers/net/sis900.o.gz/lib/mod ules/2.4.19-16mdk/kernel/drivers/net/sis900.o.gz: init_module: No such device. Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. - Original Message - From: Scott [EMAIL PROTECTED] To: Newbie list [EMAIL PROTECTED] Sent: Friday, November 07, 2003 10:24 PM Subject: Re: [newbie] network card On Fri, 2003-11-07 at 19:25, Dooggie wrote: I just installed 9.0 on my winxp. I'm having trouble connecting to the internet. Network card is recognized when it boots, but when I try to connect in mandrake console, it says no ethernet adapter detected. Mother board is asus A7S266-VM/U2 Ethernet card is sis900 Does 9.0 support this hardware? Do I need to upgrade to 9.2? Any help is greatful. Dooggie I'm running a sis900 card on 9.0 and it works just fine. Try doing as root: # modprobe -v sis900 and see what error messages you get. HTH Scott Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com