the card is a built in card "ifup eth0" -- message: /sbin/ifup: config for eth0 not found.
----- Original Message ----- From: "Dennis Myers" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, November 07, 2003 10:59 PM Subject: Re: [newbie] network card > On Friday 07 November 2003 09:44 pm, Dooggie wrote: > > error message: > > /sbin/insmod/lib/modules/2.4.19-16mdk/kernel/drivers/net/sis900.o.gz/lib/mo > >d ules/2.4.19-16mdk/kernel/drivers/net/sis900.o.gz: init_module: No such > > device. > > Hint: insmod errors can be caused by incorrect module parameters, including > > invalid IO or IRQ parameters. > > > > ----- Original Message ----- > > From: "Scott" <[EMAIL PROTECTED]> > > To: "Newbie list" <[EMAIL PROTECTED]> > > Sent: Friday, November 07, 2003 10:24 PM > > Subject: Re: [newbie] network card > > > > > On Fri, 2003-11-07 at 19:25, Dooggie wrote: > > > > I just installed 9.0 on my winxp. I'm having trouble connecting to the > > > > internet. Network card is recognized when it boots, but when I try to > > connect in mandrake console, it says "no ethernet adapter detected." > > > > > > Mother board is asus A7S266-VM/U2 > > > > Ethernet card is sis900 > > > > Does 9.0 support this hardware? > > > > Do I need to upgrade to 9.2? > > > > Any help is greatful. > > > > > > > > Dooggie > > > > > > I'm running a sis900 card on 9.0 and it works just fine. Try doing as > > > root: > > > > > > # modprobe -v sis900 > > > > > > and see what error messages you get. > > > > > > > > > HTH > > > > > > Scott > > > > -------------------------------------------------------------------------- - > >- ---- > > > > > Want to buy your Pack or Services from MandrakeSoft? > > > Go to http://www.mandrakestore.com > Where is the card mounted? Or is it a built in ethernet card? Looks like a > possible IRQ conflict. So if it is a plugin card move it to a new PCI slot > but not the one next to the AGP slot. If it is not a plugin card move one of > your other cards or change a slot IRQ and see if the bugger comes up. You > can do an "ifup eth0" in a su console also and see what happens. HTH > -- > Dennis M. linux user #180842 > > > ---------------------------------------------------------------------------- ---- > Want to buy your Pack or Services from MandrakeSoft? > Go to http://www.mandrakestore.com >
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
