[newbie] Seeking Software...
Are there many freeware or GNU open source applications for Linux that do high-quality 3D rendering and animation? Also, are there any good freeware or GNU open source apps for video editing, MOD Music Trackers, and web cam software? This would really help, if you know please reply and let me know where to download. Thanks. So sayth the Zorch! The-Zorch Sci-Fi Fantasy Ezine Under Development http://www.the-zorch.com I Internet Authors Visit the site and sign up!!!
[newbie] Network Card Problem...Urgent!
I have tried several ways to get my Intel PRO/100+ Management Adapter to work in Linux-Mandrake 7.0(the downloaded version) and I have had no success. I downloaded the Linux drivers for my NIC from Intel's web site and followed the instructions to install it, but I keep getting eth0 initialization [failed] at boot up. i have tried editing /etc/conf.modules and /etc/sysconf/hwconf to reflect the new drivers but that did not work. The newly installed drivers DO NOT show up in Lothar, and Lothar and Linux show the card as a different model with incorrect I/O port and IRQ settings then what Win98 shows the card atall other devices show settings identical to what Win98 Device Manager shows(my sound card and video card). How can I install the drivers if Intel's instructions do not work for Linux-Mandrake? Intel says to extract the files from the tar.gz file... Goto the /scr directory that will be created and run 'make'...(this creates the modules file 'e100.o') After that test the modules with insmod e100.o... Install the modules with 'make install'... Load the modules by running 'modprobe e100'... They say the modules should install and work immediately. If there is different way please let me know? How can I get the driver to show up in Lothar? I need a response soon, please help!So sayth the Zorch! The-Zorch Sci-Fi Fantasy Ezine Under Development http://www.the-zorch.com I Internet Authors Visit the site and sign up!!!
[newbie] Do not run PrettyPark.exe
The file 'PrettyPark.exe' is the installer for the Trojan virus W32/Pretty.worm.unp. This virus uses email programs to spread itself around to the first 30 people in your address book. It also transmits detailed system and network information to the author that could be use to hack into your computer system or LAN. If you ran this attachment update your anti virus software to detect and clean the virus. Then, use the attached UNDO.REG file to clean up your Windows Registry because removing the virus will render some of your programs useless if you just delete the virus. When you try to run a program after removing W32/Pretty.worm.unp your system will try to locate the file 'files32.vxd' which is the virus program. Importing this Registry fix will correct that problem. Good Luck. So sayth the Zorch! The-Zorch Sci-Fi Fantasy Ezine Under Development http://www.the-zorch.com I Internet Authors Visit the site and sign up!!! REGEDIT4 [HKEY_CLASSES_ROOT\exefile\shell\open\command] @="\"%1\" %*" [HKEY_LOCAL_MACHINE\Software\CLASSES\exefile\shell\open\command] @="\"%1\" %*"
[newbie] Ethernet Card Problem...
Hi all! I really love Linux-Mandrake, I used to use RedHat 6.1, but this distribution is so much better. I am having a trouble with my Intel PRO/100+ Management Adapter, its a 10/100Mb ethernet card with a feature that allows a remote server boot the system via a cable connected from the NIC to the motherboard. I downloaded the Linux drivers for the card from www.intel.com and followed the instructions to install the drivers. What I did was... Extracted the files... Ran make Ran isnmod modulename Ran make install Ran Modprobe modulename and got no errors. When I boot I get a 'failed' message when eth0 is being initialized. The module appears in the config files but so does the other module the system ASSUME the card was the first time I install it. Can anyone please help? So sayth the Zorch! The-Zorch Sci-Fi Fantasy Ezine Under Development http://www.the-zorch.com I Internet Authors Visit the site and sign up!!!
Re: [newbie] Ethernet Card Problem...
Its Linux-Mandrake 7.0 downloaded from the mirror site ftp.linux.tucows.com and it was installed two days ago. At 12:20 PM 3/1/00 -0500, you wrote: What version of Mandrake are you using, and is this a fresh installation? I have two PRO/100+ cards in my Linux box. They were detected on installation of Linux. You probably need to configure eth0. I prefer the command line stuff, so I would (as root) run linuxconf Select - Networking -Basic Host Information Make sure Enabled has an X in it. Make sure Net device is eth0 Set kernel module to eepro100 Try that. Bryan Michael Haney [EMAIL PROTECTED] on 03/01/2000 11:58:00 AM Please respond to [EMAIL PROTECTED] To: [EMAIL PROTECTED] cc: (bcc: Bryan Moorehead/Link/Allied Holdings) Subject: [newbie] Ethernet Card Problem... -- Hi all! I really love Linux-Mandrake, I used to use RedHat 6.1, but this distribution is so much better. -- I am having a trouble with my Intel PRO/100+ Management Adapter, its a 10/100Mb ethernet card with a feature that allows a remote server boot the system via a cable connected from the NIC to the motherboard. I downloaded the Linux drivers for the card from www.intel.com and followed the instructions to install the drivers. -- What I did was... Extracted the files... Ran make Ran isnmod modulename Ran make install Ran Modprobe modulename and got no errors. When I boot I get a 'failed' message when eth0 is being initialized. The module appears in the config files but so does the other module the system ASSUME the card was the first time I install it. -- Can anyone please help? So sayth the Zorch! The-Zorch Sci-Fi Fantasy Ezine Under Development http://www.the-zorch.com I Internet Authors Visit the site and sign up!!! So sayth the Zorch! The-Zorch Sci-Fi Fantasy Ezine Under Development http://www.the-zorch.com I Internet Authors Visit the site and sign up!!!
[newbie] Ethernet Problem...
Linux Mandrake is not initializing my Intel PRO/100+ Management Adapter. At the first boot up after install it did not initialize...I get a message saying it failed. Lothar showed the card as being configured already, and the card was set to ppp1 with the eepro100 modules in Network Configuration. After the first boot. I have since downloaded and installed the Intel drivers for this card but they are not showing up after I followed the install procedures, but they do show up in the conf.modules file. The module for this card according to Intel is e100.o. This system is not meant as a server but is on an NT LAN with a T1 link to the Internet using Static IP addresses. What would you suggest? So sayth the Zorch! The-Zorch Sci-Fi Fantasy Ezine Under Development http://www.the-zorch.com I Internet Authors Visit the site and sign up!!!
[newbie] Installing Modules...
What is the proper method to install a driver module in Linux-Mandrake 7.0? I want to reinstall the Module for an Intel PRO/100+ Management Adapter, or get help with a problem with the card. It works in Windows but not in Linux. So sayth the Zorch! The-Zorch Sci-Fi Fantasy Ezine Under Development http://www.the-zorch.com I Internet Authors Visit the site and sign up!!!