RE: [newbie] 8.1 installed - networking trouble - similar problem here too
I would like to piggy back on this thread if I may because I am having a similar problem. I recently shut down my linux box and used the power cord for another pc connection as well as the monitor. When I plugged everything back into the linux box and rebooted, kudzu appeared telling me something was wrong with my Network ISA card. I told it to keep the configuration because I wanted to do the research behind why all of a sudden is my network card not getting recognized. When I do a modprobe ne, I receive the following: /lib/modules/2.4.8-26mdk/kernel/drivers/net/ne.o.gz: init_module: No such device or address Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters /lib/modules/2.4.8-26mdk/kernel/drivers/net/ne.o.gz: insmod /lib/modules/2.4.8-26mdk/kernel/drivers/net/ne.o.gz failed /lib/modules/2.4.8-26mdk/kernel/drivers/net/ne.o.gz: insmod ne failed What is this? How do I rectify Linux Mandrake 8.1 not recognizing my NIC. In the Mandrake Control Center it does not appear nor is it in the HardDrake utility. What could be wrong? Todd -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of ChuckS Sent: Saturday, February 02, 2002 5:48 PM To: [EMAIL PROTECTED] Subject: [newbie] 8.1 installed - networking trouble I've installed 8.1 and network was working fine out of the box. After doing MandrakeUpdate(all packages updated except the 3 kernel related) I lost the network (the 3com ISA 3c509b NIC) I can ping 127.0.0.1 but not eth0 set IP192.168.42.1 [root@myduckbox net]# ping 192.168.42.1 connect: Network is unreachable eth0 doesn't list with ifconfig output but the Network Configurator GUI / tool displays all correct values? I get the following error output after running modprobe: [root@myduckbox net]# modprobe 3c509 /lib/modules/2.4.8-26mdk/kernel/drivers/net/3c509.o.gz: invalid parameter parm_io /lib/modules/2.4.8-26mdk/kernel/drivers/net/3c509.o.gz: insmod /lib/modules/2.4.8-26mdk/kernel/drivers/net/3c509.o.gz failed /lib/modules/2.4.8-26mdk/kernel/drivers/net/3c509.o.gz: insmod 3c509 failed What's the next thing to check? Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
RE: [newbie] uninstalling a tar and zip file
Yes, I am doing this as ROOT. Thrashin -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Michel Clasquin Sent: Saturday, September 01, 2001 2:39 AM To: [EMAIL PROTECTED]; Todd Zashin Subject: Re: [newbie] uninstalling a tar and zip file On Saturday 01 September 2001 03:37, Todd Zashin wrote: Hi guys, I went to the rpm.net site and downloaded the checkinstall rpm now I get this after double clicking the file and typing checkinstall at the prompt. ..I get the point that Installwatch can not be found. The mandrake cooker website shows that it is one of the files installed and now I dont see it anywhere. WHat am I doing wrong with this RPM? Let's do the obvious first ... Are you su'ing to root before you do any of this? -- Michel Clasquin, D Litt et Phil (Unisa) [EMAIL PROTECTED]/unisa.ac.za http://www.geocities.com/clasqm This message was posted from a Microsoft-free PC An intellectual is someone who has discovered something more interesting than sex - Aldous Huxley Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
RE: [newbie] uninstalling a tar and zip file
Hi guys, I went to the rpm.net site and downloaded the checkinstall rpm now I get this after double clicking the file and typing checkinstall at the prompt. Checkinstall 1.4.1 Copyright 2001 Felipe Eduardo Sanchez Diaz Duran This software is released under the GNU GPL The checkinstallrc file was not found at: /usr/local/lib/checkinstall/checkinstallrc Assuming default values. I cant find /usr/local/bin/installwatch. I cant continue. Either install installwatch or modify the INSTALLWATCH variable in this script, then run checkinstall again. Ok...so I get the point that Installwatch can not be found. The mandrake cooker website shows that it is one of the files installed and now I dont see it anywhere. WHat am I doing wrong with this RPM? TIA Todd -Original Message- From: Miark [mailto:[EMAIL PROTECTED]] Sent: Wednesday, August 29, 2001 11:36 AM To: [EMAIL PROTECTED]; [EMAIL PROTECTED] Subject: Re: [newbie] uninstalling a tar and zip file Hi Todd, You can find it at http://www.rpmfind.com. Just search for checkinstall (no version number) and the cooker version should pop up at the top of the list. If you still have trouble, here's a direct link to the file: ftp://rpmfind.net/linux/Mandrake-devel/contrib/RPMS/checkinstall-1.4.1-1mdk. i586.rpm Miark - Original Message - From: Todd Zashin [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Tuesday, August 28, 2001 5:19 PM Subject: RE: [newbie] uninstalling a tar and zip file Civilme, I checked the cooker. No such file or I am not seeing or missing something. Thanks, Todd -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of civileme Sent: Friday, August 24, 2001 8:14 PM To: [EMAIL PROTECTED]; Todd Zashin Subject: Re: [newbie] uninstalling a tar and zip file On Friday 24 August 2001 17:02, Todd Zashin wrote: Hi. I recently installed a package called nkfs that I got off of CalderaSystems web site. I want to now uninstall what I installed. I unzipped and tar the archived file and did the make procedure. Now, I want to uninstall what I installed. How do I go about reversing the action? Sincerely, Todd Zashin Computer Operator Trico Electric Cooperative 5100 W. Ina Rd. Tucson, AZ 85743 520.744.2944 xt. 1331 [EMAIL PROTECTED] Well go to cooker files and get yourself a copy of the checkinstall rpm. Then install the whole thing AGAIN (a full-meal deal!) except instead of make install you use checkinstall then rpm -e nkfs Civileme Content-Type: text/plain; charset=iso-8859-1; name=message.footer Content-Transfer-Encoding: 8bit Content-Description: Want to buy your Pack or Services from MandrakeSoft? Go to http://.mandrakestore.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
RE: [newbie] Linux Lunacy....
I add my warmest congradulations too! May your future be filled with happiness and joy together! Todd -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of poogle Sent: Monday, August 27, 2001 5:29 PM To: [EMAIL PROTECTED] Subject: Re: [newbie] Linux Lunacy Sorry for top posting :-)) but I couldn't resist. This is the newbie mailing list, not the newbie problems mailing list if you've got a problem with us congratulating a fellow member on his forthcoming marriage then the problems you have got are not Linux or Mandrake related, you need another kind of help. And I add my warmest congratulations as well ! On Monday 27 August 2001 15:11, you wrote: WHAT HAS THIS GOT TO DO WITH LINUX NEWBIE PROBLEMS!! THERE ARE OTHER VENUES FOR THIS CRAP - Original Message - From: d [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Sunday, August 26, 2001 7:02 PM Subject: Re: [newbie] Linux Lunacy LURKER here, Congrats. A little word of advice, I am sure you never have had any nor will you from any others. When my wife and I married 38 years ago we made an agreement that this was more than a marrage, it is a partnership and any decisions made that effected both would be agreed upon by both. We have always discussed thingys first then made our decision and went forward with that. Worked for us. Hope you have as GREAT a luck as we have. Never go to sleep without the I Love You closing. At 02:57 PM 8/26/01, you wrote: Just curious - anyone going on the Linux Lunacy 7 day cruise in the Caribeaan? (sp?). Its in October, and my fiance' and I are going to use it for a honeymoon, -'Nix- style! Somebody congratulate me, the date is October 19th! ;- -- /\ DarkLord \/ Want to buy your Pack or Services from MandrakeSoft? Go to http://.mandrakestore.com TIA, 'd' Don Hodges [EMAIL PROTECTED] San Antonio, Texas -- - - Want to buy your Pack or Services from MandrakeSoft? Go to http://.mandrakestore.com Content-Type: text/plain; charset=iso-8859-1; name=message.footer Content-Transfer-Encoding: 8bit Content-Description: -- Poogle Registered Linux user 182657 (added to sig for the benefit of those irritated by it) Want to buy your Pack or Services from MandrakeSoft? Go to http://.mandrakestore.com
RE: [newbie] Test Post - is format readable, etc?
yes ok -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Glenn Holden Sent: Wednesday, August 22, 2001 10:35 AM To: Linux Newbie Subject: [newbie] Test Post - is format readable, etc? Hello Testing for format, etc. Is this ok? New Newbie Glenn Want to buy your Pack or Services from MandrakeSoft? Go to http://.mandrakestore.com
[newbie] RE: Linux to Netware File Server box connectivity problems.
Hi all. I am new to this list and have a nagging question. Please help. I am running Linux Mandrake 8.0 Freq2 kernel 2.4.5-5mdk on a Pentium 200 64meg machine with 8gig HD Trident video card hooked to a vga monitor. Here is what ails my Linux machine. At work, we have a Netware 5.0 FS. I want to be able to mount a folder/directory on my Linux box from my Netware File Server because I have several folders on the File Server that I use throughout my day to day activities. I would like to save files from my Linux box to and from my home folder on the Netware box. So, I went out and installed ncpfs and ipxutils from the 2 cd set. Read the complicated HOWTO. I also made sure to first go out on the web and search on rpmfind (I think) the dependencies needed before I could run these packages. So, I installed those dependencies (one really - I had the rest) before installing the two other packages. Once the packages were installed, I went into Linuxconf and chose to make IPX enabled with auto configure on everything cause I am lazy. :) Then I went to my prompt and typed slist and got Server (0x8847) not found in ncp_open. So, then I typed ipx_configure --auto off (I forgot those two commands at the moment but maybe that is because of my frustration at this point :) Then I typed ipx_interface delall and then ipx_interface add -p eth0 802.2 Same thing/error happened when I typed slist. I thought maybe I need to put the IPX HEX network address of the Netware File Server after 802.2 and when I do I get unrecognizable network address error (something like this). I have also tried the internal network address to no avail also. WHAT AM I DOING WRONG! UGH! I have tried uninstalling and reinstalling the ipxutils and the ncpfs packages to no avail. I have gone into Linuxconf and switched everything back to the way it was before I started this whole adventure. I have done an ipxdump and I see something on my monitor - not legible but packet traffic is occurring and 802.2 is identified. So, I have tried and tried and tried and now I am turning to you all for help. I have installed ipxutils 2.2.0.18.a-3mdk and ncpfs of the same version. Should I maybe try an older version of these packs? Is my kernel too recent? I searched on Google.com and a lot of people have been complaining about this issue but I do not see solutions. Is there any? Is Mandrake doing anything to respond to this problem? My Netware box is configured with one physical NIC but has two protocols...IPX/SPX and TCP/IP TCP/IP is on EtherII and IPX/SPX is on 802.2 the internal network is currently mapped to the ETHERII device Your help is much appreciated and I am thankful for it. I hope this was not too long but, I wanted to give as much info as I know because I really need to get this done. Todd -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Nadin Merali Sent: Thursday, August 16, 2001 1:48 PM To: [EMAIL PROTECTED] Subject: [newbie] LICQ Console Hey all I am trying to set up the licq console. I can get in and login to my account but every time I type /help for the list of commands, they come to quickly and it does not fit on the screen, I cant scroll up and use the |less or |more command so I can scroll Can anyone copy and past the /help screen so I have a copy of all the commands. Thanks Nadin Want to buy your Pack or Services from MandrakeSoft? Go to http://.mandrakestore.com
