Re: [newbie] 10.1 install problem
Mike Adolf wrote: On Sunday 30 January 2005 08:28 pm, Dennis Myers wrote: On Sunday 30 January 2005 03:45 pm, Mike Adolf wrote: Just installed 10.1 Official on a compac preserio. The installation video appeared normal during installation, but when I rebooted I just got a black screen. How does one even begin to solve that kind of problem? Mike Put the first CD in and reboot, then choose the upgrade 10.1 and let it go to the last screen, then choose screen resolution and try resetting to a lower color setting like 16bpp or less, run a test and see if you get the rainbow. If so you will have a useable config and you can go to finish. and reboot. Thanks for the reply. I did as you suggested. The resolution was at 1024x786 (or something like that) and the color was already set at 16bpp, which was the smallest of available choices. I change the resolution to 1024x480, the next smaller choice. After reboot, KDE came up, but the smaller resolution is unworkable. I used harddrake to reset it back to 1024x786, rebooted, and got the same black screen. This is a dual boot with XP and XP works fine with the higher res. I have another monitor to try, but if that doesn't do it, I guess that 10.1 doesn't work with the graphics card, Intel 185. Mike Make sure the monitor selection is correct. It sounds like the higher settings are driving the monitor beyond its rating. By changing the frequency range that the monitor supports, you can probably get the regulation you want. You can also try setting the color depth to less the 16bpp. I am not sure what modes you are actual using, as the numbers you report are not standard ones... 1600 X 1200 1280 X 1024 1024 X 768 800 X 600 640 X 480 320 X 240 Mikkel Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] 10.1 install problem
On Monday 31 January 2005 11:03 am, Mikkel L. Ellertson wrote: Mike Adolf wrote: On Sunday 30 January 2005 08:28 pm, Dennis Myers wrote: On Sunday 30 January 2005 03:45 pm, Mike Adolf wrote: Just installed 10.1 Official on a compac preserio. The installation video appeared normal during installation, but when I rebooted I just got a black screen. How does one even begin to solve that kind of problem? Mike Put the first CD in and reboot, then choose the upgrade 10.1 and let it go to the last screen, then choose screen resolution and try resetting to a lower color setting like 16bpp or less, run a test and see if you get the rainbow. If so you will have a useable config and you can go to finish. and reboot. Thanks for the reply. I did as you suggested. The resolution was at 1024x786 (or something like that) and the color was already set at 16bpp, which was the smallest of available choices. I change the resolution to 1024x480, the next smaller choice. After reboot, KDE came up, but the smaller resolution is unworkable. I used harddrake to reset it back to 1024x786, rebooted, and got the same black screen. This is a dual boot with XP and XP works fine with the higher res. I have another monitor to try, but if that doesn't do it, I guess that 10.1 doesn't work with the graphics card, Intel 185. Mike Make sure the monitor selection is correct. It sounds like the higher settings are driving the monitor beyond its rating. By changing the frequency range that the monitor supports, you can probably get the regulation you want. You can also try setting the color depth to less the 16bpp. I am not sure what modes you are actual using, as the numbers you report are not standard ones... 1600 X 1200 1280 X 1024 1024 X 768 800 X 600 640 X 480 320 X 240 Mikkel is video card is also on-board and as such, in order to use the modes that may require more memory, he may have to pass a mem= xxxM on the lilo append line, or when booting. the xxx should be changed to reflect the correct amount of Memory available to the system. So if he had a 256 mem stick, and is using 32 megs as video shared memory, he would try it first by hitting escape when lilo first comes up, then type in linux mem=224M (don't forget the last capital M) hit enter and see if he can use the video modes he wants. if that works, write back, and someone will explain how to make the change permanent with each boot. he might also want to consider that sizes that are not standard ones are for laptops (such as 1024x480) or devices with a display that is not the same rectangle as most monitors used to be -- linux counter #167806 (http://counter.li.org/) website=http://ed-tharp.kicks-ass.org; Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] 10.1 install problem
Just installed 10.1 Official on a compac preserio. The installation video appeared normal during installation, but when I rebooted I just got a black screen. How does one even begin to solve that kind of problem? Mike Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] 10.1 install problem
On Sunday 30 January 2005 03:45 pm, Mike Adolf wrote: Just installed 10.1 Official on a compac preserio. The installation video appeared normal during installation, but when I rebooted I just got a black screen. How does one even begin to solve that kind of problem? Mike Put the first CD in and reboot, then choose the upgrade 10.1 and let it go to the last screen, then choose screen resolution and try resetting to a lower color setting like 16bpp or less, run a test and see if you get the rainbow. If so you will have a useable config and you can go to finish. and reboot. -- Dennis M. linux user #180842 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] 10.1 install problem
On Sunday 30 January 2005 08:28 pm, Dennis Myers wrote: On Sunday 30 January 2005 03:45 pm, Mike Adolf wrote: Just installed 10.1 Official on a compac preserio. The installation video appeared normal during installation, but when I rebooted I just got a black screen. How does one even begin to solve that kind of problem? Mike Put the first CD in and reboot, then choose the upgrade 10.1 and let it go to the last screen, then choose screen resolution and try resetting to a lower color setting like 16bpp or less, run a test and see if you get the rainbow. If so you will have a useable config and you can go to finish. and reboot. Thanks for the reply. I did as you suggested. The resolution was at 1024x786 (or something like that) and the color was already set at 16bpp, which was the smallest of available choices. I change the resolution to 1024x480, the next smaller choice. After reboot, KDE came up, but the smaller resolution is unworkable. I used harddrake to reset it back to 1024x786, rebooted, and got the same black screen. This is a dual boot with XP and XP works fine with the higher res. I have another monitor to try, but if that doesn't do it, I guess that 10.1 doesn't work with the graphics card, Intel 185. Mike Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
