Re: [newbie] 7.2 HeartsPrinting

2000-11-16 Thread Marcia

Dear Tom, Paul,  All, Thank you for your suggestions. I will study that
printing page from Mandrakeuser.org. I do have a question here: Is it
unusual to not have the printing set up correctly during installation
with 7.2? My printing setup was automatic with the installation in 7.
Otherwise overall I am very impressed with 7.2 and feel that it is an
improvement over 7.

As far as the questions for the Hearts game. I am not sure what X
version would be used in 7.2. How can I check for sure? What config file
would that be in 7.2? Is there a way to check on versions through the
console?

 My video card/driver is a S3Virge and is setup exactly like it was in
7, I believe. It is an extended Super VGA, 800x600 at 60hz ,640x480 at
72hz. Vert refresh is 55-90 Video Ram is 2048 Default color depth-16.
The Hearts game worked fine in 7 with this setup. My display and X seems
to be fine in 7.2 except for this Hearts game. I am not sure how to
answer the closed source driver question. I am a relatively new
newbie.:) I tried the hearts-0.90-1.i386.rpm first then I tried
hearts-0.0.13-1.i386.rpm after the other one did not work. The latter
one had the same problem (no faces). The latter one or the 0.0.13
version is the one I used without problems in Linux-Mandrake7. I have
not tried different resolutions or color depths and do not really know
how to do that in 7.2.

If someone can help me solve this I would be grateful since this game is
the one thing that helped my husband accept Linux. 

Thank you for your help. Sincerely, Marcia




Re: [newbie] 7.2 HeartsPrinting

2000-11-16 Thread Tom Brinkman

On Thursday 16 November 2000 02:45 pm, Marcia wrote:

 As far as the questions for the Hearts game. I am not sure what X
 version would be used in 7.2. How can I check for sure? What config
 file would that be in 7.2? Is there a way to check on versions
 through the console?

   type 'X -version', if that doesn't work type 'XFree86 -version'

  My video card/driver is a S3Virge and is setup exactly like it was
 in 7, I believe.

No not exactly, it can't be, because you have a newer kernel, X 
version, and many, many other changes with 7.2.

 It is an extended Super VGA, 800x600 at 60hz
 ,640x480 at 72hz. Vert refresh is 55-90 Video Ram is 2048 Default
 color depth-16.

 just 2 megs on the card is borderline.  800x600x16 is 'bout all it 
wants.

 The Hearts game worked fine in 7 with this setup. My
 display and X seems to be fine in 7.2 except for this Hearts game. I
 am not sure how to answer the closed source driver question.

  It's using a generic VGA driver so that becomes sort'a academic. What 
I was fishin for is many times with hardware that uses closed source 
drivers, upgrade Linux and the hardware quits workin properly.

 I am a
 relatively new newbie.:) I tried the hearts-0.90-1.i386.rpm

 an ftp search for this rpm turned up -0-
 
 then I tried hearts-0.0.13-1.i386.rpm 

   ftp for this one turns up lot's, but they're all only 4.6k ??
I downloaded a couple and they were all invalid.  So, I searched
hearts-0.0.12-1.i386.rpm  and got a lot at 234k, d/l one and 
installed...
 yep, no faces...
   so I searched  hearts-0.0.13.tar.gz  and got  a bunch of 4.6k files 
again. I d/l'd  hearts-0.0.12.tar.gz  (224k) and it failed on 
configure, not the right headers/libraries.

 I have not tried different resolutions or color
 depths and do not really know how to do that in 7.2.

Like anything else in Linux there's lot'a ways, easiest for a 
newcomer with 7.2 would prob'ly be DrakConf | Change Screen Res. 
But if you have set up both 640 and 800, first try Crtl+Alt, +/- on 
the numpad to toggle the different resolutions on the fly.
But I don't think this is the road to go anyhow, I believe the 
app's just not gonna run right under the new kernel/libraries.

 If someone can help me solve this I would be grateful since this game
 is the one thing that helped my husband accept Linux.

I'm out'a ideas, 'cept for the first one I gave you.  The app has 
fallen behind, and without a rewrite, prob'ly isn't gonna work right 
with the newer 7.2 kernel (2.2.17), X, KDE2, libs, etc.

Buying another old computer, or makin a new partition on the one 
you've got, and loading Mandrake 7.0 with Hearts (and faces) would 
probl'y be a lot cheaper than a divorce ;
-- 
Tom Brinkman   [EMAIL PROTECTED] Galveston Bay