Re: [Re: [newbie] Configuring External Modem]
If your internal modem is a pci or an isa then you would simply remove the card from your computer, if it is part of the motherboard, then you will have to check your instruction book for the motherboard. If you are like me, you don't have any instruction, so you will just have to wing it, possibly you could find out more about your motherboard on the internet. Let me know how you come out.Carl From: "nobody noway" [EMAIL PROTECTED] Reply-To: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: Re: [Re: [newbie] Configuring External Modem] Date: Wed, 14 Feb 2001 22:16:29 -0600 Thanks for your response. I thought about disabeling the winmodem but I could not figure out how to do it using hardDrake. Any Ideas? Thanks in advance for any help you can give Da From: donald hinds [EMAIL PROTECTED] Reply-To: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: Re: [Re: [newbie] Configuring External Modem] Date: 14 Feb 2001 08:48:27 EST "Carl Foley" [EMAIL PROTECTED] wrote: I am no expert on these matters, but if it were me i would try to disable the internal modem, then make sure you have the appropriate seriel port, hook up your modem,(making sure that you have the proper equipment to hook it up with) and hardrake should take care of the rest, also make sure that your modem is turned on when you boot up. *** An internal modem has nothing to do with the serial port and does not need to be disabled. In LM 7.2 you pick the serial port ttys(0,1,2,3) where you plug in the external modem and then Linux should find it. Don Don Hinds - photo, motorcycle, misc. http://www.wyzards.com Get free email and a permanent address at http://www.netaddress.com/?N=1 _ Get your FREE download of MSN Explorer at http://explorer.msn.com _ Get your FREE download of MSN Explorer at http://explorer.msn.com
RE: [Re: [newbie] Configuring External Modem]
If the modem is built into the motherboard, try going into your bios.. (press delete on boot usually) and you may be able to change the settings to disable... as i the previous message, if it is any other sort of modem, just pull it out,, unless you are dualbooting and want it for windows... in which case, why? you have an externaluse that. g luck... Franki -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Carl Foley Sent: Saturday, 17 February 2001 2:51 AM To: [EMAIL PROTECTED] Subject: Re: [Re: [newbie] Configuring External Modem] If your internal modem is a pci or an isa then you would simply remove the card from your computer, if it is part of the motherboard, then you will have to check your instruction book for the motherboard. If you are like me, you don't have any instruction, so you will just have to wing it, possibly you could find out more about your motherboard on the internet. Let me know how you come out.Carl From: "nobody noway" [EMAIL PROTECTED] Reply-To: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: Re: [Re: [newbie] Configuring External Modem] Date: Wed, 14 Feb 2001 22:16:29 -0600 Thanks for your response. I thought about disabeling the winmodem but I could not figure out how to do it using hardDrake. Any Ideas? Thanks in advance for any help you can give Da From: donald hinds [EMAIL PROTECTED] Reply-To: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: Re: [Re: [newbie] Configuring External Modem] Date: 14 Feb 2001 08:48:27 EST "Carl Foley" [EMAIL PROTECTED] wrote: I am no expert on these matters, but if it were me i would try to disable the internal modem, then make sure you have the appropriate seriel port, hook up your modem,(making sure that you have the proper equipment to hook it up with) and hardrake should take care of the rest, also make sure that your modem is turned on when you boot up. *** An internal modem has nothing to do with the serial port and does not need to be disabled. In LM 7.2 you pick the serial port ttys(0,1,2,3) where you plug in the external modem and then Linux should find it. Don Don Hinds - photo, motorcycle, misc. http://www.wyzards.com Get free email and a permanent address at http://www.netaddress.com/?N=1 _ Get your FREE download of MSN Explorer at http://explorer.msn.com _ Get your FREE download of MSN Explorer at http://explorer.msn.com
Re: [Re: [newbie] Configuring External Modem]
Thanks for your response. I thought about disabeling the winmodem but I could not figure out how to do it using hardDrake. Any Ideas? Thanks in advance for any help you can give Da From: donald hinds [EMAIL PROTECTED] Reply-To: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: Re: [Re: [newbie] Configuring External Modem] Date: 14 Feb 2001 08:48:27 EST "Carl Foley" [EMAIL PROTECTED] wrote: I am no expert on these matters, but if it were me i would try to disable the internal modem, then make sure you have the appropriate seriel port, hook up your modem,(making sure that you have the proper equipment to hook it up with) and hardrake should take care of the rest, also make sure that your modem is turned on when you boot up. *** An internal modem has nothing to do with the serial port and does not need to be disabled. In LM 7.2 you pick the serial port ttys(0,1,2,3) where you plug in the external modem and then Linux should find it. Don Don Hinds - photo, motorcycle, misc. http://www.wyzards.com Get free email and a permanent address at http://www.netaddress.com/?N=1 _ Get your FREE download of MSN Explorer at http://explorer.msn.com
Re: [Re: [newbie] Configuring External Modem]
Da ,...Don is not necessarily right about ignoring your internal modem. If you plug your external modem into a com port which uses the same IRQ and/or I/O address as your internal one, it won't work. I assume that your internal modem is built-in? If not, the easiest way to solve your problem is to remove it. Otherwise, modify your external com port so that it uses different settings than your internal one. You can adjust it in your BIOS. Keep in mind that you shouldn't use com 3 for your external modem if your internal modem uses com 1 . Use com 2 instead. If your internal uses com 2, don't use com 4, instead use com 1/3 . You get the idea, right? Then try changing your settings in the setup appplet in Kppp. -- Dan LaBine Maximum LAN's Ltd. Registered Linux User #190712
Re: [newbie] Configuring External Modem
I am no expert on these matters, but if it were me i would try to disable the internal modem, then make sure you have the appropriate seriel port, hook up your modem,(making sure that you have the proper equipment to hook it up with) and hardrake should take care of the rest, also make sure that your modem is turned on when you boot up. From: "nobody noway" [EMAIL PROTECTED] Reply-To: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: [newbie] Configuring External Modem Date: Sun, 11 Feb 2001 14:01:34 -0600 Hello I have installed MD 7.2 on a IBM think pad 390X with an internal win modem. I also have a 3Com U.S. Robotics External 56K Voice Faxmodem Pro hooked up to serial port. hardDrake recognizes the winmodem but for obvious resons I can not use it. My question is how do I install the external 3Com modem. Thank you Da _ Get your FREE download of MSN Explorer at http://explorer.msn.com _ Get your FREE download of MSN Explorer at http://explorer.msn.com
Re: [newbie] Configuring External Modem
On Sunday 11 February 2001 14:01, you wrote: Hello I have installed MD 7.2 on a IBM think pad 390X with an internal win modem. I also have a 3Com U.S. Robotics External 56K Voice Faxmodem Pro hooked up to serial port. hardDrake recognizes the winmodem but for obvious resons I can not use it. My question is how do I install the external 3Com modem. Thank you Da _ Get your FREE download of MSN Explorer at http://explorer.msn.com Actually you don't have to install it, if you are using KPPP or PPP for that matter just go into setup and change the device location. If you have it on serial port 1 on your computer put ttys0 as the connection port.. If it is on serial port 2 then ttys1 and KPPP should be able to dial up without further fussing. Let us know if it does or doesn't solve the problem. -- Dennis M. registered linux user # 180842
