Re: [newbie] Errors when defining sources via EasyURPMI
On Thu, 2004-04-29 at 11:34, Ron Hunter-Duvar wrote: On April 29, 2004 11:06, Travis Crook wrote: ... {SNIP} I'm afraid all I can do is commiserate. I've been trying for nearly 2 months now, without a single successful update from any server. I get the same message as you every time. I can even logon to the servers manually via ftp, but I still get the curl error. I tried using wget to see if that would improve things. It didn't. I let it sit all weekend and it still was unable to add the source. However, I logged into the MandrakeClub site and found a mirror there that works (I was able to update about 120MB worth!). It was an http source (from planetmirror) so I don't know if I'll ever get an ftp source to work! Oh, well. At least I can run updates! -- Travis Crook Visions Beyond www.VisionsBeyond.com 208-478-7836 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] Errors when defining sources via EasyURPMI
Hi all, I am having a difficult time adding a source that is an ftp source. I can add http sources no problem. Someone earlier suggested that maybe this was due to the ftp servers being overcrowded, but I can put in the url for the ftp site in a browser and view the directories, etc. I usually get an error message like the following: It doesn't seem to matter what time of day I try (Mountain Time Zone in US). I have tried at 6:00 am local time to 6:00 pm local time and get the same error. I am behind a firewall but I don't have problems downloading, etc. via ftp sites other than ones I am trying to set up as urpmi sources. Any ideas? Thanks! and sorry if this is a bother. -- Travis Crook Visions Beyond www.VisionsBeyond.com 208-478-7836 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] Errors when defining sources via EasyURPMI
Oops! I forgot part of the message the first time! I'll try again... Hi all, I am having a difficult time adding a source that is an ftp source. I can add http sources no problem. Someone earlier suggested that maybe this was due to the ftp servers being overcrowded, but I can put in the url for the ftp site in a browser and view the directories, etc. I usually get an error message like the following: Forgotten part.. ftp://public.ftp.planetmirror.com/pub/mandrakelinux/devel/10.0/i586/Mandrake/base/hdlist1.cz ...retrieving failed: curl: (7) Connect failed It doesn't seem to matter what time of day I try (Mountain Time Zone in US). I have tried at 6:00 am local time to 6:00 pm local time and get the same error. I am behind a firewall but I don't have problems downloading, etc. via ftp sites other than ones I am trying to set up as urpmi sources. Any ideas? Thanks! and sorry if this is a bother. -- Travis Crook Visions Beyond www.VisionsBeyond.com 208-478-7836 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Errors when defining sources via EasyURPMI
On Thu, 29 Apr 2004, Ron Hunter-Duvar wrote: On April 29, 2004 11:06, Travis Crook wrote: ... I am having a difficult time adding a source that is an ftp source. I can add http sources no problem. Someone earlier suggested that maybe this was due to the ftp servers being overcrowded, but I can put in the url for the ftp site in a browser and view the directories, etc. I usually get an error message like the following: Forgotten part.. ftp://public.ftp.planetmirror.com/pub/mandrakelinux/devel/10.0/i586/Mandrak e/base/hdlist1.cz ...retrieving failed: curl: (7) Connect failed It doesn't seem to matter what time of day I try (Mountain Time Zone in US). I have tried at 6:00 am local time to 6:00 pm local time and get the same error. I am behind a firewall but I don't have problems downloading, etc. via ftp sites other than ones I am trying to set up as urpmi sources. Any ideas? Thanks! and sorry if this is a bother. I'm afraid all I can do is commiserate. I've been trying for nearly 2 months now, without a single successful update from any server. I get the same message as you every time. I can even logon to the servers manually via ftp, but I still get the curl error. -- Ron Hunter-Duvar ronhd at users dot sourceforge dot net Opinions expressed here are all mine. Rights to use these opinions are granted under the GNU GPL. Hi, Did you try the --wget option? It works much better than --curl (which is the default) for me. Pablo Pablo Vitoria Garcia Address:Dpto. Quimica Inorganica, Facultad de Ciencias Universidad del Pais Vasco (UPV/EHU) Apartado 644, E-48080 Bilbao SPAIN e-mail: [EMAIL PROTECTED] Phone: +34 94 6012000 Ext. 5529 Fax: +34 94 4648500 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Errors when defining sources via EasyURPMI
Ron Hunter-Duvar wrote: On April 29, 2004 11:06, Travis Crook wrote: ... I am having a difficult time adding a source that is an ftp source. I can add http sources no problem. Someone earlier suggested that maybe this was due to the ftp servers being overcrowded, but I can put in the url for the ftp site in a browser and view the directories, etc. I usually get an error message like the following: Forgotten part.. ftp://public.ftp.planetmirror.com/pub/mandrakelinux/devel/10.0/i586/Mandrak e/base/hdlist1.cz ...retrieving failed: curl: (7) Connect failed It doesn't seem to matter what time of day I try (Mountain Time Zone in US). I have tried at 6:00 am local time to 6:00 pm local time and get the same error. I am behind a firewall but I don't have problems downloading, etc. via ftp sites other than ones I am trying to set up as urpmi sources. Any ideas? Thanks! and sorry if this is a bother. I'm afraid all I can do is commiserate. I've been trying for nearly 2 months now, without a single successful update from any server. I get the same message as you every time. I can even logon to the servers manually via ftp, but I still get the curl error. I don't know what has gone wrong with curl on 10 - used to work OK on 9.2 - but I had exactly the same problem as you two. Someone suggested using --wget in the urpmi options instead of curl, so I tried it and have had very few failures since I started using it. Try it - maybe it will work for you too. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Errors when defining sources via EasyURPMI
What I do is set up a security source, the only one I have been able to get working is a french site called proxad I believe. Then I check all the types security, bugs and updates and get about 3 screenfuls select all and go. Roly On Thursday 29 April 2004 10:34 am, Ron Hunter-Duvar wrote: On April 29, 2004 11:06, Travis Crook wrote: ... I am having a difficult time adding a source that is an ftp source. I can add http sources no problem. Someone earlier suggested that maybe this was due to the ftp servers being overcrowded, but I can put in the url for the ftp site in a browser and view the directories, etc. I usually get an error message like the following: Forgotten part.. ftp://public.ftp.planetmirror.com/pub/mandrakelinux/devel/10.0/i586/Mandr ak e/base/hdlist1.cz ...retrieving failed: curl: (7) Connect failed It doesn't seem to matter what time of day I try (Mountain Time Zone in US). I have tried at 6:00 am local time to 6:00 pm local time and get the same error. I am behind a firewall but I don't have problems downloading, etc. via ftp sites other than ones I am trying to set up as urpmi sources. Any ideas? Thanks! and sorry if this is a bother. I'm afraid all I can do is commiserate. I've been trying for nearly 2 months now, without a single successful update from any server. I get the same message as you every time. I can even logon to the servers manually via ftp, but I still get the curl error. -- MicroSoft - The company that made the internet unsafe! Linux Counter #241069 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com