Re: [newbie] Help! Sound not working in 9.2 with via82xx: solved
Just for future reference. I downloaded the ALSA 9.0 RC6 package, but did not yet install it. But yesterday evening when I was playing with the Mandrake Control Centre again, I changed to the OSS driver for the Via chip and also disabled ALSA at boot. This morning when I started up the computer there was sound. So the solution was to use the OSS driver instead of the ALSA one. The next challenge will be ACPI. Erik Op za 13-12-2003, om 21:00 schreef emnej: Op za 13-12-2003, om 08:46 schreef Frans Ketelaars: On Saturday 13 December 2003 10:13, emnej wrote: Op vr 12-12-2003, om 09:32 schreef Derek Jennings: On Friday 12 Dec 2003 7:15 am, emnej wrote: Op do 11-12-2003, om 19:31 schreef Inhabitant of Zion: Have you tried running alsaconf? Its available in the alsa-utils-1.0.0-0.1rc1mdk RPM for i586. When I run alsaconf as root, I receive the following message: # alsaconf device_mode int, description Device file permission mask for devfs. which: no dialog in (/sbin:/usr/sbin:/bin:/usr/bin:/usr/X11R6/bin:/usr/local/bin:/usr /local/sbi n) which: no whiptail in (/sbin:/usr/sbin:/bin:/usr/bin:/usr/X11R6/bin:/usr/local/bin:/usr /local/sbi n) Error, dialog or whiptail not found. So it seems that something here is not good, but I have no idea what ;-) Thanks for helping, Erik Did you see this ? http://www.mandrakelinux.com/en/errata.php3#alsaconf alsaconf is very effective at setting up your sound card. It will write the driver configuration into /etc/modules.conf but be aware it will overwrite the existing contents, and will not replace the non sound lines of the file. So make a backup before running alsaconf and replace the non sound lines by hand afterwards. derek Derek, Thank you very much for the link. I didn't know this and it helped me to run alsaconf. It created a new version of the modules.conf but that was fine because I had backed up the file because you warned me. Since then I do not get a warning anymore when starting kmix from a terminal, but I also still do not have any sound. Is there anything else that I can do? TIA, Erik You must raise the volumes of the relevant channels _and_ unmute them. In kmix unmuting a channel is done by clicking on the green led. It should be bright green. HTH, -Frans __ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com I think that the problem is not with the volume. 'Inhabitant of Zion' advised me to look on the ALSA list. I searched their pages and found out that it seems to be a problem with recent versions of ALSA. Others had the same problem and were advised to go back to ALSA 9.0 RC6. This is what I will now try to do. Anyway, thank you very much for your help! Hartelijke groeten, Erik __ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Help! Sound not working in 9.2
On Saturday 13 December 2003 10:13, emnej wrote: Op vr 12-12-2003, om 09:32 schreef Derek Jennings: On Friday 12 Dec 2003 7:15 am, emnej wrote: Op do 11-12-2003, om 19:31 schreef Inhabitant of Zion: Have you tried running alsaconf? Its available in the alsa-utils-1.0.0-0.1rc1mdk RPM for i586. When I run alsaconf as root, I receive the following message: # alsaconf device_mode int, description Device file permission mask for devfs. which: no dialog in (/sbin:/usr/sbin:/bin:/usr/bin:/usr/X11R6/bin:/usr/local/bin:/usr /local/sbi n) which: no whiptail in (/sbin:/usr/sbin:/bin:/usr/bin:/usr/X11R6/bin:/usr/local/bin:/usr /local/sbi n) Error, dialog or whiptail not found. So it seems that something here is not good, but I have no idea what ;-) Thanks for helping, Erik Did you see this ? http://www.mandrakelinux.com/en/errata.php3#alsaconf alsaconf is very effective at setting up your sound card. It will write the driver configuration into /etc/modules.conf but be aware it will overwrite the existing contents, and will not replace the non sound lines of the file. So make a backup before running alsaconf and replace the non sound lines by hand afterwards. derek Derek, Thank you very much for the link. I didn't know this and it helped me to run alsaconf. It created a new version of the modules.conf but that was fine because I had backed up the file because you warned me. Since then I do not get a warning anymore when starting kmix from a terminal, but I also still do not have any sound. Is there anything else that I can do? TIA, Erik You must raise the volumes of the relevant channels _and_ unmute them. In kmix unmuting a channel is done by clicking on the green led. It should be bright green. HTH, -Frans Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Help! Sound not working in 9.2: almost solved
Op za 13-12-2003, om 08:46 schreef Frans Ketelaars: On Saturday 13 December 2003 10:13, emnej wrote: Op vr 12-12-2003, om 09:32 schreef Derek Jennings: On Friday 12 Dec 2003 7:15 am, emnej wrote: Op do 11-12-2003, om 19:31 schreef Inhabitant of Zion: Have you tried running alsaconf? Its available in the alsa-utils-1.0.0-0.1rc1mdk RPM for i586. When I run alsaconf as root, I receive the following message: # alsaconf device_mode int, description Device file permission mask for devfs. which: no dialog in (/sbin:/usr/sbin:/bin:/usr/bin:/usr/X11R6/bin:/usr/local/bin:/usr /local/sbi n) which: no whiptail in (/sbin:/usr/sbin:/bin:/usr/bin:/usr/X11R6/bin:/usr/local/bin:/usr /local/sbi n) Error, dialog or whiptail not found. So it seems that something here is not good, but I have no idea what ;-) Thanks for helping, Erik Did you see this ? http://www.mandrakelinux.com/en/errata.php3#alsaconf alsaconf is very effective at setting up your sound card. It will write the driver configuration into /etc/modules.conf but be aware it will overwrite the existing contents, and will not replace the non sound lines of the file. So make a backup before running alsaconf and replace the non sound lines by hand afterwards. derek Derek, Thank you very much for the link. I didn't know this and it helped me to run alsaconf. It created a new version of the modules.conf but that was fine because I had backed up the file because you warned me. Since then I do not get a warning anymore when starting kmix from a terminal, but I also still do not have any sound. Is there anything else that I can do? TIA, Erik You must raise the volumes of the relevant channels _and_ unmute them. In kmix unmuting a channel is done by clicking on the green led. It should be bright green. HTH, -Frans __ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com I think that the problem is not with the volume. 'Inhabitant of Zion' advised me to look on the ALSA list. I searched their pages and found out that it seems to be a problem with recent versions of ALSA. Others had the same problem and were advised to go back to ALSA 9.0 RC6. This is what I will now try to do. Anyway, thank you very much for your help! Hartelijke groeten, Erik Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Help! Sound not working in 9.2
On Friday 12 Dec 2003 7:15 am, emnej wrote: Op do 11-12-2003, om 19:31 schreef Inhabitant of Zion: Have you tried running alsaconf? Its available in the alsa-utils-1.0.0-0.1rc1mdk RPM for i586. When I run alsaconf as root, I receive the following message: # alsaconf device_mode int, description Device file permission mask for devfs. which: no dialog in (/sbin:/usr/sbin:/bin:/usr/bin:/usr/X11R6/bin:/usr/local/bin:/usr/local/sbi n) which: no whiptail in (/sbin:/usr/sbin:/bin:/usr/bin:/usr/X11R6/bin:/usr/local/bin:/usr/local/sbi n) Error, dialog or whiptail not found. So it seems that something here is not good, but I have no idea what ;-) Thanks for helping, Erik Did you see this ? http://www.mandrakelinux.com/en/errata.php3#alsaconf alsaconf is very effective at setting up your sound card. It will write the driver configuration into /etc/modules.conf but be aware it will overwrite the existing contents, and will not replace the non sound lines of the file. So make a backup before running alsaconf and replace the non sound lines by hand afterwards. derek -- -- www.jennings.homelinux.net http://twiki.mdklinuxfaq.org Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Help! Sound not working in 9.2
Op vr 12-12-2003, om 05:43 schreef Charlie: On Fri, 12 Dec 2003 06:09 am, many eyes noted that Ronald J. Hall wrote: On Thursday 11 December 2003 01:31 pm, Inhabitant of Zion wrote: Io Have you tried running alsaconf? Io Io Its available in the alsa-utils-1.0.0-0.1rc1mdk RPM for i586. Io Have you tried running aumix or kmix to make sure that your sound settings are not muted? I think Derek said this was the number one problem/solution with sound. If everything else fails try this.. A long shot, but have uninstalled alsa and reinstalled it, and that made sound work on some systems after rebooting. Though it might have worked after just a new login. If everything else fails try this.. Charlie I already reinstalled the whole system twice but unfortunately without a good result. Still, thanks for the advice. Erik Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Help! Sound not working in 9.2
Op vr 12-12-2003, om 09:32 schreef Derek Jennings: On Friday 12 Dec 2003 7:15 am, emnej wrote: Op do 11-12-2003, om 19:31 schreef Inhabitant of Zion: Have you tried running alsaconf? Its available in the alsa-utils-1.0.0-0.1rc1mdk RPM for i586. When I run alsaconf as root, I receive the following message: # alsaconf device_mode int, description Device file permission mask for devfs. which: no dialog in (/sbin:/usr/sbin:/bin:/usr/bin:/usr/X11R6/bin:/usr/local/bin:/usr/local/sbi n) which: no whiptail in (/sbin:/usr/sbin:/bin:/usr/bin:/usr/X11R6/bin:/usr/local/bin:/usr/local/sbi n) Error, dialog or whiptail not found. So it seems that something here is not good, but I have no idea what ;-) Thanks for helping, Erik Did you see this ? http://www.mandrakelinux.com/en/errata.php3#alsaconf alsaconf is very effective at setting up your sound card. It will write the driver configuration into /etc/modules.conf but be aware it will overwrite the existing contents, and will not replace the non sound lines of the file. So make a backup before running alsaconf and replace the non sound lines by hand afterwards. derek Derek, Thank you very much for the link. I didn't know this and it helped me to run alsaconf. It created a new version of the modules.conf but that was fine because I had backed up the file because you warned me. Since then I do not get a warning anymore when starting kmix from a terminal, but I also still do not have any sound. Is there anything else that I can do? TIA, Erik Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Help! Sound not working in 9.2
Have you tried running alsaconf? Its available in the alsa-utils-1.0.0-0.1rc1mdk RPM for i586. -- John Willby Registered Linux user number 321644 ICQ: 92791912 Jabber: [EMAIL PROTECTED] YIM: vicarofwibley Linux is like a wigwam - No Gates, no Windows, Apache inside. 18:29:15 up 14 days, 10:52, 2 users, load average: 0.00, 0.00, 0.00 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Help! Sound not working in 9.2
On Thursday 11 December 2003 01:31 pm, Inhabitant of Zion wrote: Io Have you tried running alsaconf? Io Io Its available in the alsa-utils-1.0.0-0.1rc1mdk RPM for i586. Io Have you tried running aumix or kmix to make sure that your sound settings are not muted? I think Derek said this was the number one problem/solution with sound. -- /\ DarkLord \/ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Help! Sound not working in 9.2
Op do 11-12-2003, om 19:31 schreef Inhabitant of Zion: Have you tried running alsaconf? Its available in the alsa-utils-1.0.0-0.1rc1mdk RPM for i586. When I run alsaconf as root, I receive the following message: # alsaconf device_mode int, description Device file permission mask for devfs. which: no dialog in (/sbin:/usr/sbin:/bin:/usr/bin:/usr/X11R6/bin:/usr/local/bin:/usr/local/sbin) which: no whiptail in (/sbin:/usr/sbin:/bin:/usr/bin:/usr/X11R6/bin:/usr/local/bin:/usr/local/sbin) Error, dialog or whiptail not found. So it seems that something here is not good, but I have no idea what ;-) Thanks for helping, Erik Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Help! Sound not working in 9.2
On Fri, 12 Dec 2003 06:09 am, many eyes noted that Ronald J. Hall wrote: On Thursday 11 December 2003 01:31 pm, Inhabitant of Zion wrote: Io Have you tried running alsaconf? Io Io Its available in the alsa-utils-1.0.0-0.1rc1mdk RPM for i586. Io Have you tried running aumix or kmix to make sure that your sound settings are not muted? I think Derek said this was the number one problem/solution with sound. If everything else fails try this.. A long shot, but have uninstalled alsa and reinstalled it, and that made sound work on some systems after rebooting. Though it might have worked after just a new login. If everything else fails try this.. Charlie -- Hopeless fellows - using their heads to look for their heads! Zen saying This email is guaranteed to be wholly Linux Mandrake 9.1, Kmail v1.5 and OpenOffice.org1Beta Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com