[NTG-context] linenotes/footnotes
Hi gang, I played arund some with the linenotes mechanism provided in core- lnt.tex and an example provided by Hans about a year ago. On p. 398-399 of the TeXbook, Knuth shows how footnotes can be set as ordinary paragraphs in plain TeX, with no paragraph breaks between single notes. In the ConTeXt mechanism, I see only the possibility to determine the number of columns on which notes will be set. Can Knuth's solution somehow be hooked into the ConTeXt notes? Best Thomas ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] ConTeXt +Tioga
Jilani Khaldi wrote:
interesting (i assume that it produced pdf)
Yes with the difference that while Metapost, Asympthote and GLE
(http://glx.sourceforge.net/) use their own proprietary language to do
PDF graphics, Tioga(*) uses Ruby, a full featrured and very nice
language. I even see more presence in the future of Ruby in ConTeXt. Isn'it?
well, if we can have \ruby {...} as we will have \lua {...}
Hans
-
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com
| www.pragma-pod.nl
-
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] updating
Aditya Mahajan wrote: On Fri, 21 Apr 2006, Hans Hagen wrote: fyi: if you want to update (e.g. the new kurier zip) you can try something textools --updatetree kurier-tex e:\tex\texmf (take you rown tree roots) Thanks for this. I was going to ask how to install the new files :-) this will tell you what will be updated, merged and deleted (use --force to really do it) --merge --force is also needed and --delete if you also want to clean up there's also tmftools --analyze Hans - Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com | www.pragma-pod.nl - ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] Document Structuring
nico wrote:
On Thu, 20 Apr 2006 08:34:44 +0200, Renaud AUBIN [EMAIL PROTECTED] wrote:
3. How to obtain (I,II,III,IV) for part numbering ?
\setupsection[section-1][conversion=Romannumerals]
seems ok, but I would find more natural to be able to write the following,
at least to make the conversion local to parts (not applied to any other
heading defined with the same level):
\setuphead[part][conversion=Romannumerals]
\starttext
\definehead[xx][chapter]
\def\sectionofhead#1{\executeifdefined{\??ko#1\c!section}\s!unknown}
\sectionofhead{chapter}
\sectionofhead{xx}
\setupsection[\sectionofhead{part}][conversion=Romannumerals]
\stoptext
in a next release i'll implement auto-indirectness so that
setupsection[chapter][conversion=greek]
\setupsection[section][conversion=characters]
will work as well (rather trivial patch)
Hans
-
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com
| www.pragma-pod.nl
-
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] ConTeXt + asymptote
there's also: ftp://tug.ctan.org/pub/tex-archive/graphics/pgf (although for context i'd rewrite the backend drivers a bit in order to be more integrated) Hans - Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com | www.pragma-pod.nl - ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] linenotes/footnotes
Thomas A.Schmitz wrote: Hi gang, I played arund some with the linenotes mechanism provided in core- lnt.tex and an example provided by Hans about a year ago. On p. 398-399 of the TeXbook, Knuth shows how footnotes can be set as ordinary paragraphs in plain TeX, with no paragraph breaks between single notes. In the ConTeXt mechanism, I see only the possibility to determine the number of columns on which notes will be set. Can Knuth's solution somehow be hooked into the ConTeXt notes? it actually is (and has been present for a while) n=0 should do that but a few days ago i found out that it got broken when i implemented multiple notes, i'll send you the latest core-not file Hans - Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com | www.pragma-pod.nl - ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] linenotes/footnotes
Hans Hagen wrote: it actually is (and has been present for a while) n=0 should do that but a few days ago i found out that it got broken when i implemented multiple notes, i'll send you the latest core-not file Hans How could I ever doubt it? :-) But the patch isn't quite working, now notes are typeset on top of each other. Thanks Thomas ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] ConTeXt + asymptote
I discovered conTeXt+metapost because I was not satisfied with the limited capabilties of pgf for my graph music project. I have to say that I was forcing pgf beyond its scope, but in any case it is not intended as a complex, global plotting system, as far as I understand. Best -a- On 22 Apr 2006, at 10:38, Hans Hagen wrote: ftp://tug.ctan.org/pub/tex-archive/graphics/pgf Andrea Valle DAMS - Facoltà di Scienze della Formazione Università degli Studi di Torino http://www.semiotiche.it/andrea [EMAIL PROTECTED] ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] Document Structuring
On Sat, 22 Apr 2006 10:24:58 +0200, Hans Hagen [EMAIL PROTECTED] wrote:
nico wrote:
On Thu, 20 Apr 2006 08:34:44 +0200, Renaud AUBIN [EMAIL PROTECTED]
wrote:
3. How to obtain (I,II,III,IV) for part numbering ?
\setupsection[section-1][conversion=Romannumerals]
seems ok, but I would find more natural to be able to write the
following,
at least to make the conversion local to parts (not applied to any other
heading defined with the same level):
\setuphead[part][conversion=Romannumerals]
\starttext
\definehead[xx][chapter]
\def\sectionofhead#1{\executeifdefined{\??ko#1\c!section}\s!unknown}
\sectionofhead{chapter}
\sectionofhead{xx}
\setupsection[\sectionofhead{part}][conversion=Romannumerals]
\stoptext
in a next release i'll implement auto-indirectness so that
setupsection[chapter][conversion=greek]
\setupsection[section][conversion=characters]
will work as well (rather trivial patch)
Ok, but then
\definehead[xx][chapter]
\setupsection[\sectionofhead{chapter}][conversion=Romannumerals]
\setupsection[\sectionofhead{xx}][conversion=Character]
will put Character conversion for both chapter and xx heading. That's why
i thought it could be interesting to have the conversion option also for
setuphead, to limit the conversion to one heading.
btw, it seems strange to have so many setuphead command options
(textcommand, numbercommand, deepnumbercommand) to format completely the
head rendering, and not the ability to change only the head number
conversion without changing the whole global section level.
Regards,
BG
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] ConTeXt +Tioga
Hans Hagen wrote:
Jilani Khaldi wrote:
interesting (i assume that it produced pdf)
Yes with the difference that while Metapost, Asympthote and GLE
(http://glx.sourceforge.net/) use their own proprietary language to do
PDF graphics, Tioga(*) uses Ruby, a full featrured and very nice
language. I even see more presence in the future of Ruby in ConTeXt. Isn'it?
well, if we can have \ruby {...} as we will have \lua {...}
It is just my 2c, but I really dislike the Tioga approach. It feels
like typesetting a book in TeX by writing a single-shot pascal
program. ;-)
Specifically, I find code like this (Tioga):
move_to_point(x0, y0)
append_curve_to_path(x1, y1, x2, y2, x3, y3)
far uglier than this (Asymptote/MetaPost):
z0.. controls z1 and z2 .. z3
Taco
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
[NTG-context] First space shown in a referenced itemize head
Hello, When a reference is set to \head, a space after the square brackets appears in the output. Shouldn't it be ignored? Applying a reference to \item does not show the problem. Besides, what is the best way to put item or head text in square brackets? Using \relax works but I'm not sure if it's the recommended method. Here is an example: \starttext \startitemize[n][headstyle=bold] \head Head1 \par Body1 \head Head2 \par Body2 \head[u]Head3 \par Body3 \head[v] Head4 \par Body4 \head[v] Head4 \par Body4 \head\relax[Head in brackets] \par Body5 \head\relax [Head in brackets] \par Body6 \item Item1 \item Item2 \item[w]Item3 \item[x] Item4 \item[y] Item4 \item\relax[Item in bracket] \item\relax [Item in bracket] \stopitemize \stoptext Regards, BG ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] Document Structuring
nico wrote:
On Sat, 22 Apr 2006 10:24:58 +0200, Hans Hagen [EMAIL PROTECTED] wrote:
nico wrote:
On Thu, 20 Apr 2006 08:34:44 +0200, Renaud AUBIN [EMAIL PROTECTED]
wrote:
3. How to obtain (I,II,III,IV) for part numbering ?
\setupsection[section-1][conversion=Romannumerals]
seems ok, but I would find more natural to be able to write the
following,
at least to make the conversion local to parts (not applied to any other
heading defined with the same level):
\setuphead[part][conversion=Romannumerals]
\starttext
\definehead[xx][chapter]
\def\sectionofhead#1{\executeifdefined{\??ko#1\c!section}\s!unknown}
\sectionofhead{chapter}
\sectionofhead{xx}
\setupsection[\sectionofhead{part}][conversion=Romannumerals]
\stoptext
in a next release i'll implement auto-indirectness so that
setupsection[chapter][conversion=greek]
\setupsection[section][conversion=characters]
will work as well (rather trivial patch)
Ok, but then
\definehead[xx][chapter]
\setupsection[\sectionofhead{chapter}][conversion=Romannumerals]
\setupsection[\sectionofhead{xx}][conversion=Character]
will put Character conversion for both chapter and xx heading. That's why
i thought it could be interesting to have the conversion option also for
setuphead, to limit the conversion to one heading.
btw, it seems strange to have so many setuphead command options
(textcommand, numbercommand, deepnumbercommand) to format completely the
head rendering, and not the ability to change only the head number
conversion without changing the whole global section level.
it can be done at the sectionblock level (see chinese)
Hans
-
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com
| www.pragma-pod.nl
-
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] linenotes/footnotes
Thomas A. Schmitz wrote: Hans Hagen wrote: it actually is (and has been present for a while) n=0 should do that but a few days ago i found out that it got broken when i implemented multiple notes, i'll send you the latest core-not file Hans How could I ever doubt it? :-) But the patch isn't quite working, now notes are typeset on top of each other. hm, can you send me your (small) test file? (make sure that at place time the same settings apply ! so either use \setupnote or also provide the setting sto \place... Hans - Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com | www.pragma-pod.nl - ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] ConTeXt +Tioga
It is just my 2c, but I really dislike the Tioga approach. It feels
like typesetting a book in TeX by writing a single-shot pascal
program. ;-)
Specifically, I find code like this (Tioga):
move_to_point(x0, y0)
append_curve_to_path(x1, y1, x2, y2, x3, y3)
far uglier than this (Asymptote/MetaPost):
z0.. controls z1 and z2 .. z3
Very true, but you forgot that in Tioga everything is done inside Ruby
interpreter. Tioga is a Ruby extension so you could use the power of
Ruby, its standard library and all the other extensions made for it
inside Tioga.
However, I don't like Asymptote, just seeing things like this:
--
struct parent {
real x=1;
public void virtual(int) {write (0);}
void f() {virtual(1);}
}
parent operator init() {return new parent;}
void write(parent p) {write(p.x);}
struct child {
parent parent;
real y=2;
void virtual(int x) {write (x);}
parent.virtual=virtual;
void f()=parent.f;
}
parent operator cast(child child) {return child.parent;}
child operator init() {return new child;}
parent p;
child c;
write(c); // Outputs 1;
p.f(); // Outputs 0;
c.f(); // Outputs 1;
write(c.parent.x); // Outputs 1;
write(c.y);
---
But, do we really need a baroque language like this to just draw some
primitive graphics?
jk
--
Jilani KHALDI
http://jkhaldi.oltrelinux.com
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] 2c considerations about win installer
On Fri, 21 Apr 2006 01:33:04 +0200, andrea valle wrote: Dear all, I'm using conTeXt to create automatic documentation about sound classification. The idea is that starting from an html file collecting infos about sounds my program can generate some schematic images using R and POV-Ray and to create a conTeXt file including both images and textual information. Now, I'd like to share this work with my students. I'm on macosx, they're typically on win. My program is in python so it's cross-platform, so no problem. Obviously they can annotate sounds, generate images and include them manually in a MS word file. But I'd prefer that they compile the conTeXt file. On two win machines I tried to install conTeXt using the complete package (shipped with Scite: nice). I had always (different) troubles (on each machine) with environment variable (e.g. for Perl): actually I'm not able to run conTeXt. Hacking a bit, eventually asking the list, I think I will solve the problem. But I don't think that my students can do, as I suspect that they probably not even know what is PATH. And I cannot help them on each installation. So, more generally, I was asking myself if it would not be possible (and better) to have an .exe installer as usual happens in win, including Perl, maybe Ruby (+ or- 20 Mb doesn't change too much). Double click, and it set ups all the installation parameters. A completely autonomous installer would allow many people to try, use and get fond conTeXt (and maybe to leave Word) without having to struggle with problems which typically lead people to leave out. It seems to me that a similar installer would be a refinement in the spirit of the actual mswincontext distro. At the end, it's not that far form Gerben's distro on macosx. It does everything for me... Or maybe am I missing something? Just my 2 c Best -a- Andrea Valle DAMS - Facoltà di Scienze della Formazione Università degli Studi di Torino http://www.semiotiche.it/andrea [EMAIL PROTECTED] If I'm not wrong, If you go on http://www.pragma-ade.com/dir/context/install/ (click documents directory view context install), you will find that the bigger *.zip (cdwincontext.zip) contains Perl Ruby, while mswincontext.zip no. So you can run Context out of the box with cdwincontext. (untested, because I got Perl Ruby already) Your students can also install Ruby (single click .exe : Rubyinstaller from : http://rubyforge.org/frs/download.php/9417/ruby184-16_rc1.exe) and Perl (single click .exe : activePerl :http://www.activestate.com/Products/ActivePerl/) whithout any pb's of adding new executables to the path, since it's done while installation. Cheers -- olivier Turlier ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] Document Structuring
On Sat, 22 Apr 2006 12:16:10 +0200, Hans Hagen [EMAIL PROTECTED] wrote:
nico wrote:
nico wrote:
\setuphead[part][conversion=Romannumerals]
[...]
Ok, but then
\definehead[xx][chapter]
\setupsection[\sectionofhead{chapter}][conversion=Romannumerals]
\setupsection[\sectionofhead{xx}][conversion=Character]
will put Character conversion for both chapter and xx heading. That's
why
i thought it could be interesting to have the conversion option also for
setuphead, to limit the conversion to one heading.
btw, it seems strange to have so many setuphead command options
(textcommand, numbercommand, deepnumbercommand) to format completely the
head rendering, and not the ability to change only the head number
conversion without changing the whole global section level.
it can be done at the sectionblock level (see chinese)
Hm, I've missed something. I see nothing about sectionblock in chinese,
but at page 10 there is:
\setuphead [section] [conversion=chinese]
\setuphead [chapter] [conversion=]
\setuphead [section] [conversion=numbers]
Regards,
BG
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] 2c considerations about win installer
olivier wrote: Your students can also install Ruby (single click .exe : Rubyinstaller from : http://rubyforge.org/frs/download.php/9417/ruby184-16_rc1.exe) and Perl (single click .exe : activePerl :http://www.activestate.com/Products/ActivePerl/) whithout any pb's of adding new executables to the path, since it's done while installation. Except that I found out the very hard way, that at least Ruby installs nicely for a power user, but doesn't change the path unless the installation is done when logged in as Administrator - which may be a problem in a multi-user environment. Other than that, I haven't had any problems with newer versions of the MSWinConTeXt distribution (the one that unzips into 'isoimage' folder). I'm currently running the April 10 version from CD at work and once Perl and Ruby got installed into the path, the system has been really easy to use. [I downloaded the mswincontext.zip, unzipped and burned the *contents* of the isoimage folder onto a CD - and that's it, then.) Yes I agree, it is harder to put a working ConTeXt into Windows than into a Mac where it was *very* easy, but with Administrator rights to Windows2000/XP, the abovementioned Perl and Ruby installation packages are no problem and after that things just work. Mari (multi-OS user, but best in Windows) ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
[NTG-context] Feature request: Creating tables from (tab-separated) values
Hello,
This idea described below was partially inspired by gnuplot
contemptations, but mainly because writing tables with both LaTeX
ConTeXt is too complex in most cases.
Natural tables are great since they offer anough flexibility to do
just about anything with tables, but many tables are still simple m
values in n rows and for those it's an annoying task to write those
\NCs, \eTR\bTRs, ... even if it's just a matter of writing a
script to transform the values to a suitable form.
Christopher Creutzig has sent an interesting solution to the mailing
list some time ago (see
http://wiki.contextgarden.net/TABLE#Creating_tables_from_CSV_data_.28Comma_Separated_Values.29)
and since then I've been thinking about a similar, slightly more
powerful solution which could make table-typesetiting easier.
I don't have enough skills to implement it, but here are some
properties listed that such a solution should have. In case anyone
finds this little project doable ... It would solve quite some
headaches.
- [very important] a possibility to define own macros, so that it
would be easy to print any type of tables (natural tables, TaBlEs, ...
or whatever form that could possibly come to someone's mind); for
example \def\MyDef#1#2{\bTR\bTD#1\eTD\bTD#2\eTD\eTR}; the machinery
behind would only have to feed these macros properly according
- [important] possible to separate the data with different characters:
tab, comma, multiple spaces, ampersand (), ...
- [very useful] a possibility to read the data from a block
(\start...\stop...) or from a file; it would be handly to be able to
use the same data file for making a plot and for printing the data
into a table
- [useful] possibility to ignore lines starting with '#' (optional;
usually these are comments)
- [not crucial] if comma (,) is separating the data, a possibility to escape it
- [useful] a possibility to select which rows (columns) to print (for
example rows 1-3,8-last or even, ...)
- [optional, but still useful] replacing decimal points with commas
- [optional] if the table was supposed to have 4 colums and only 2 are
available, ignore/fill with empty arguments (don't panic with
unnecessary errors)
- [with luaTeX in mind] calculating sums of rows columns other
Excel-like calculations references accross tables ;) - well, that
one wasn't meant seriously.
Thanks a lot,
Mojca
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] ConTeXt +Tioga
As far as we are discussing about graphics, actually my favorite and
quick (and powreful) solution to produce pdf graphics not TeX-related
is to use the graphic facilities of R, generating automatically scripts
with code
(http://www.r-project.org/).
Best
-a-
On 22 Apr 2006, at 14:12, Jilani Khaldi wrote:
It is just my 2c, but I really dislike the Tioga approach. It feels
like typesetting a book in TeX by writing a single-shot pascal
program. ;-)
Specifically, I find code like this (Tioga):
move_to_point(x0, y0)
append_curve_to_path(x1, y1, x2, y2, x3, y3)
far uglier than this (Asymptote/MetaPost):
z0.. controls z1 and z2 .. z3
Very true, but you forgot that in Tioga everything is done inside Ruby
interpreter. Tioga is a Ruby extension so you could use the power of
Ruby, its standard library and all the other extensions made for it
inside Tioga.
However, I don't like Asymptote, just seeing things like this:
--
struct parent {
real x=1;
public void virtual(int) {write (0);}
void f() {virtual(1);}
}
parent operator init() {return new parent;}
void write(parent p) {write(p.x);}
struct child {
parent parent;
real y=2;
void virtual(int x) {write (x);}
parent.virtual=virtual;
void f()=parent.f;
}
parent operator cast(child child) {return child.parent;}
child operator init() {return new child;}
parent p;
child c;
write(c); // Outputs 1;
p.f(); // Outputs 0;
c.f(); // Outputs 1;
write(c.parent.x); // Outputs 1;
write(c.y);
---
But, do we really need a baroque language like this to just draw some
primitive graphics?
jk
--
Jilani KHALDI
http://jkhaldi.oltrelinux.com
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Andrea Valle
DAMS - Facoltà di Scienze della Formazione
Università degli Studi di Torino
http://www.semiotiche.it/andrea
[EMAIL PROTECTED]
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] Feature request: Creating tables from (tab-separated) values
On Sat, 22 Apr 2006, Mojca Miklavec wrote:
- [with luaTeX in mind] calculating sums of rows columns other
Excel-like calculations references accross tables ;) - well, that
one wasn't meant seriously.
Hello Mojca,
should be possible even without luaTeX:
\input realcalc % can be found on CTAN
\def\SumFF{0}
\def\SumEUR{0}
\def\AddEUR#1{\Radd\SumEUR\SumEUR{#1}%
\Rmul\R{#1}{6.55957}\Radd\R\R{0.005}\Rtrunc\R2\R
\Radd\SumFF\SumFF\R \bTR \bTD\eTD \bTD#1\eTD \expanded{\bTD\R\eTD} \eTR}
\def\PrintSums{\bTR \bTD Sums: \eTD
\bTD\Rtrunc\SumEUR2\SumEUR \SumEUR\eTD
\bTD\Rtrunc\SumFF2\SumFF \SumFF \eTD \eTR}
\starttext
\setupTABLE[r][each][align=flushright]
\setupTABLE[r][1][align=middle]
\bTABLE
\bTR \bTH\eTH \bTH Euro \eTH \bTH FF \eTH \eTR
\AddEUR{1.23}
\AddEUR{2.34}
\AddEUR{45.67}
\PrintSums
\eTABLE
\stoptext
With LaTeX, you can even replace the . by a , :
\documentclass{article}
\usepackage{dcolumn}
\input{realcalc}% on CTAN
\newcommand*\cc[1]{\multicolumn{1}{c}{#1}}
\def\scanwert\ignorespaces#1\unskip{\gdef\WERT{#1}#1}
\begin{document}
\begin{tabular}{{\scanwert}D{.}{,}{-1}%
{\Rmul\res\WERT{6.55957}\Radd\res\res{0.005}\Rtrunc\res2\res\res}%
D{.}{,}{-1}}%
\cc{Euro} \cc{FF}\\\hline
20.33 \\
20.3 \\
20 \\
14.46
\end{tabular}
\end{document}
Cheers, Peter
--
http://pmrb.free.fr/contact/
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] Fieldstack Walk
Michal Kvasnička wrote:
Good afternoon.
Many thanks, this solves the problem -- at least partially. The frames
are `walking' now, but new problems appeared. I found that when I set
`clickin=...', it is set it automatically to `clickout' as well, so one
mouse click runs the JavaScript code twice. So I've set it this way:
\definefieldstack[fgolds2]
[sgolds1,sgolds2a,sgolds2b,sgolds2c,sgolds2d,sgolds2]
[frame=off,option=,clickout=JS(Walk_Field{fgolds3}),clickin=]
It's better, but I found that now frames are walking in a strange order.
It is rather puzzling, since when it is invoked by \goto{...}[JS(...)],
it works well. Moreover, it does different things at AdobeReader 7.x
under Linux, and Acrobat 4.x under Windoze.
Can you help me to solve it?
Took some time, but it works now. What I don't understand, is the
strange behaviour of the offset parameter in this case. See attached file.
Greets, Peter
Many thanks once more.
M.K.
% interface=en output=pdftex
% Time-stamp: Samstag, 22 April 2006 21:53:30; test.tex
%
\setupinteraction[state=start]
\setupcolors[state=start]
\starttext
\tracefieldstrue
\switchtobodyfont[96pt]
\def\FS#1{\framed[width=4cm,height=4cm,strut=no]{\red\bf#1}}%
\definesymbol [empty] []
\definesymbol [one] [\FS{1}]
\definesymbol [two] [\FS{2}]
\definesymbol [three] [\FS{3}]
\definesymbol [four][\FS{4}]
\definesymbol [five][\FS{5}]
\setupfield[interaction]
[width=4cm,height=4cm,
% frame=off,
framecolor=blue,
offset=none,% default offset causes different positioning of walk button and
fieldstack
clickin=JS(Walk_Field{sequence})]
\definefield[Walk][check][interaction][empty][empty]
\definefieldstack[sequence]
[one,two,three,four,five]
[frame=off,
offset=none,% default offset causes different positioning of walk button and
fieldstack
clickin=JS(Walk_Field{sequence})]
\defineproperty[interaction][layer][title=walkfield, state=start]
\vbox{\forgetall
\nointerlineskip\smashedvbox{\fieldstack[sequence]}%
%
\startproperty[interaction]%
\nointerlineskip\field[Walk]
\stopproperty%
}
\blank[2cm]
\showfields
\stoptext
%%% Local Variables:
%%% mode: context
%%% TeX-master:
%%% End:
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
[NTG-context] Table width trouble
Hello, I come back with that damn table test case. With release 2006.04.22: - it works fine when the column width is passed as table option, - it's wrong when the width is passed via a column setup only, - it works ok when both table and column option are passed, and it's the column option that is used (which is the expected behaviour). - it's ok when no width specified at all. \starttext \startbuffer \bTR \bTD[nc=2] A \eTD\bTD x \eTD \bTD[nc=2] B \eTD \eTR \bTR \bTD X \eTD \bTD[nc=3] C \eTD \bTD x \eTD \eTR \bTR \bTD[nc=2] D \eTD \bTD x \eTD \bTD[nc=2] E \eTD \eTR \stopbuffer % ok \bTABLE[frame=on,width=3em] \getbuffer \eTABLE % nok, messy table \bTABLE[frame=on] \setupTABLE[c][each][width=3em] \getbuffer \eTABLE % ok, width=3em for each column \bTABLE[frame=on,width=0.1pt] \setupTABLE[c][each][width=3em] \getbuffer \eTABLE % ok \bTABLE[frame=on] \getbuffer \eTABLE \stoptext Regards, BG ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] 2c considerations about win installer
On 4/21/06, Jilani Khaldi wrote: So, more generally, I was asking myself if it would not be possible (and better) to have an .exe installer as usual happens in win, including Perl, maybe Ruby (+ or- 20 Mb doesn't change too much). Double click, and it set ups all the installation parameters. A completely autonomous installer would allow many people to try, use and get fond conTeXt (and maybe to leave Word) without having to struggle with problems which typically lead people to leave out. It seems to me that a similar installer would be a refinement in the spirit of the actual mswincontext distro. At the end, it's not that far form Gerben's distro on macosx. It does everything for me... Or maybe am I missing something? No, nothing; and it is very easy to do it, above all when it could be done with Ruby using the gem installation. Have you already done that? If it's easy to do it, I think that there would be many users would be really thankful if someone would have written an one-click-installer. MikTeX developer doesn't listen too much to requests from ConTeXt users (although he does a marvellous job with MikTeX otherwise and has enough of other things to do). But if I don't count the troubles connected with not-so-good-support for ConTeXt in MikTeX, it stil remains one of the easiest ways to install and update it. It's staightforward to install standolne-ConTeXt, but not for beginners and those having almost no knowledge about computers. An installation .exe would be warmly welcome. Mojca You can install and update ConTeXt with a single comand controlling indipendies and everything else needed. It is also very easy using InnoSetup (http://www.jrsoftware.org/isdl.php). Cheers, jk ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
