Re: [OmniOS-discuss] LSI3108

[Linda Kateley]

I have worked with the 20.00.04.00 and it has worked very well. But the 
07 has had problems. All on freebsd or freenas. Haven't tested with omni.


If anyone has the sata 6gb firmware sitting around version 20.00.04.00 
would love to get my hands on it



linda

On 5/23/16 3:50 PM, Eric Sproul wrote:

On Mon, May 23, 2016 at 4:18 PM, Dan McDonald  wrote:

And if you do, make sure it's version 19 or lower.  The IT firmware > 19 is 
known to be flaky.  Check the illumos list archives for details on why.

We may want to revisit that advice-- I've noticed that LSI/Avago have
revised v20 firmware several times, presumably to fix bugs.  Their
support downloads currently show "20.00.07.00" available for download.
I haven't had a chance to try that one yet, but I do have some dev
systems running 20.00.04.00 without any apparent issues.  These are
direct-attach configurations, i.e. no expanders.

Eric
___
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
http://lists.omniti.com/mailman/listinfo/omnios-discuss


___
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
http://lists.omniti.com/mailman/listinfo/omnios-discuss

Re: [OmniOS-discuss] LSI3108

[Matej Žerovnik]

Hey,

I just plugged in the card and it was recognized:) It’s a LSI SAS3008 card.
prtconf -d says:
pci1000,30a0 (pciex1000,97) [LSI Logic / Symbios Logic SAS3008 PCI-Express 
Fusion-MPT SAS-3], instance #8

On the other hand, lspci says different:
15:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS-3 3108 
[Invader] (rev 02)

prtconf gives the right info.

I run P12 IT firmware on it. 

Matej

> On 24 May 2016, at 23:52, Richard Skelton  wrote:
> 
> Hi Matej,
> How did you get the mpt_sas driver to attach to your card ?
> Looks like your device id is pci1000,30a0.
> From prtconf -d I see for my SAS 9305-24i :-
> pci1000,31a0 (pciex1000,c4) [LSI Logic / Symbios Logic SAS3224 
> PCI-Express Fusion-MPT SAS-3] (driver not attached)
> 
> lspci does not sow the card :-(
> 
> Matej Žerovnik wrote:
>> 
>> There is even an updated version of P20 that should eliminate the problems. 
>> I think the version number is 20.04.000 where the broken version was 
>> 20.02.000. I think I read about that on FreeNAS forum.
>> 
>> As far as 12G goes, I’m about to run P12. I did some tests and so far no 
>> problems apart from FW upload tce invalid warning when I run sas3ircu list
>> May 19 12:11:34 node scsi: [ID 107833 kern.warning] WARNING: 
>> /pci@74,0/pci8086,2f08@3/pci1000,30a0@0 (mpt_sas8):
>> May 19 12:11:34 node FW Upload tce invalid!
>> 
>> Matej
>> 
>>> On 23 May 2016, at 22:23, Schweiss, Chip >> > wrote:
>>> 
>>> 
>>> On Mon, May 23, 2016 at 3:18 PM, Dan McDonald >> > wrote:
>>> 
>>> > On May 23, 2016, at 4:10 PM, Fábio Rabelo >> > > wrote:
>>> >
>>> > Hi to all ...
>>> >
>>> > You may need to flash the IT firmware :
>>> >
>>> > http://www.avagotech.com/products/server-storage/host-bus-adapters/sas-9305-24i#downloads
>>> >  
>>> > 
>>> 
>>> And if you do, make sure it's version 19 or lower.  The IT firmware > 19 is 
>>> known to be flaky.  Check the illumos list archives for details on why.
>>> 
>>> That only on the 6G HBA.   On the 12G HBA version 12 is the newest.   I 
>>> haven't heard any preferred versions on these.  I've been running  v10 for 
>>> several months now without issue.
>>> 
>>> -Chip
>>>  
>>> 
>>> Dan
>>> 
>>> ___
>>> OmniOS-discuss mailing list
>>> OmniOS-discuss@lists.omniti.com 
>>> http://lists.omniti.com/mailman/listinfo/omnios-discuss 
>>> 
>>> 
>>> ___
>>> OmniOS-discuss mailing list
>>> OmniOS-discuss@lists.omniti.com 
>>> http://lists.omniti.com/mailman/listinfo/omnios-discuss 
>>> 
>> 
>> 
>> ___
>> OmniOS-discuss mailing list
>> OmniOS-discuss@lists.omniti.com 
>> http://lists.omniti.com/mailman/listinfo/omnios-discuss 
>> 
>>   



smime.p7s
Description: S/MIME cryptographic signature
___
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
http://lists.omniti.com/mailman/listinfo/omnios-discuss

Re: [OmniOS-discuss] LSI3108

[Richard Skelton]

Hi Matej,
How did you get the mpt_sas driver to attach to your card ?
Looks like your device id is pci1000,30a0.
>From prtconf -d I see for my SAS 9305-24i :-
pci1000,31a0 (pciex1000,c4) [LSI Logic / Symbios Logic
SAS3224 PCI-Express Fusion-MPT SAS-3] (driver not attached)

lspci does not sow the card :-(

Matej Žerovnik wrote:
> There is even an updated version of P20 that should eliminate the
> problems. I think the version number is 20.04.000 where the broken
> version was 20.02.000. I think I read about that on FreeNAS forum.
>
> As far as 12G goes, I’m about to run P12. I did some tests and so far
> no problems apart from FW upload tce invalid warning when I run
> sas3ircu list
> May 19 12:11:34 node scsi: [ID 107833 kern.warning] WARNING:
> /pci@74,0/pci8086,2f08@3/pci1000,30a0@0 (mpt_sas8):
> May 19 12:11:34 node FW Upload tce invalid!
>
> Matej
>
>> On 23 May 2016, at 22:23, Schweiss, Chip > > wrote:
>>
>>
>> On Mon, May 23, 2016 at 3:18 PM, Dan McDonald > > wrote:
>>
>>
>> > On May 23, 2016, at 4:10 PM, Fábio Rabelo
>> mailto:fa...@fabiorabelo.wiki.br>> wrote:
>> >
>> > Hi to all ...
>> >
>> > You may need to flash the IT firmware :
>> >
>> > 
>> http://www.avagotech.com/products/server-storage/host-bus-adapters/sas-9305-24i#downloads
>>
>> And if you do, make sure it's version 19 or lower.  The IT
>> firmware > 19 is known to be flaky.  Check the illumos list
>> archives for details on why.
>>
>>
>> That only on the 6G HBA.   On the 12G HBA version 12 is the newest.  
>> I haven't heard any preferred versions on these.  I've been running
>>  v10 for several months now without issue.
>>
>> -Chip
>>  
>>
>>
>> Dan
>>
>> ___
>> OmniOS-discuss mailing list
>> OmniOS-discuss@lists.omniti.com
>> 
>> http://lists.omniti.com/mailman/listinfo/omnios-discuss
>>
>>
>> ___
>> OmniOS-discuss mailing list
>> OmniOS-discuss@lists.omniti.com 
>> http://lists.omniti.com/mailman/listinfo/omnios-discuss
>
> 
>
> ___
> OmniOS-discuss mailing list
> OmniOS-discuss@lists.omniti.com
> http://lists.omniti.com/mailman/listinfo/omnios-discuss
>   
___
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
http://lists.omniti.com/mailman/listinfo/omnios-discuss

Re: [OmniOS-discuss] LSI3108

[Matej Žerovnik]

There is even an updated version of P20 that should eliminate the problems. I 
think the version number is 20.04.000 where the broken version was 20.02.000. I 
think I read about that on FreeNAS forum.

As far as 12G goes, I’m about to run P12. I did some tests and so far no 
problems apart from FW upload tce invalid warning when I run sas3ircu list
May 19 12:11:34 node scsi: [ID 107833 kern.warning] WARNING: 
/pci@74,0/pci8086,2f08@3/pci1000,30a0@0 (mpt_sas8):
May 19 12:11:34 node FW Upload tce invalid!

Matej

> On 23 May 2016, at 22:23, Schweiss, Chip  wrote:
> 
> 
> On Mon, May 23, 2016 at 3:18 PM, Dan McDonald  > wrote:
> 
> > On May 23, 2016, at 4:10 PM, Fábio Rabelo  > > wrote:
> >
> > Hi to all ...
> >
> > You may need to flash the IT firmware :
> >
> > http://www.avagotech.com/products/server-storage/host-bus-adapters/sas-9305-24i#downloads
> >  
> > 
> 
> And if you do, make sure it's version 19 or lower.  The IT firmware > 19 is 
> known to be flaky.  Check the illumos list archives for details on why.
> 
> That only on the 6G HBA.   On the 12G HBA version 12 is the newest.   I 
> haven't heard any preferred versions on these.  I've been running  v10 for 
> several months now without issue.
> 
> -Chip
>  
> 
> Dan
> 
> ___
> OmniOS-discuss mailing list
> OmniOS-discuss@lists.omniti.com 
> http://lists.omniti.com/mailman/listinfo/omnios-discuss 
> 
> 
> ___
> OmniOS-discuss mailing list
> OmniOS-discuss@lists.omniti.com
> http://lists.omniti.com/mailman/listinfo/omnios-discuss



smime.p7s
Description: S/MIME cryptographic signature
___
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
http://lists.omniti.com/mailman/listinfo/omnios-discuss

Re: [OmniOS-discuss] LSI3108

[Eric Sproul]

On Mon, May 23, 2016 at 4:18 PM, Dan McDonald  wrote:
> And if you do, make sure it's version 19 or lower.  The IT firmware > 19 is 
> known to be flaky.  Check the illumos list archives for details on why.

We may want to revisit that advice-- I've noticed that LSI/Avago have
revised v20 firmware several times, presumably to fix bugs.  Their
support downloads currently show "20.00.07.00" available for download.
I haven't had a chance to try that one yet, but I do have some dev
systems running 20.00.04.00 without any apparent issues.  These are
direct-attach configurations, i.e. no expanders.

Eric
___
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
http://lists.omniti.com/mailman/listinfo/omnios-discuss

Re: [OmniOS-discuss] LSI3108

[Schweiss, Chip]

On Mon, May 23, 2016 at 3:18 PM, Dan McDonald  wrote:

>
> > On May 23, 2016, at 4:10 PM, Fábio Rabelo 
> wrote:
> >
> > Hi to all ...
> >
> > You may need to flash the IT firmware :
> >
> >
> http://www.avagotech.com/products/server-storage/host-bus-adapters/sas-9305-24i#downloads
>
> And if you do, make sure it's version 19 or lower.  The IT firmware > 19
> is known to be flaky.  Check the illumos list archives for details on why.
>

That only on the 6G HBA.   On the 12G HBA version 12 is the newest.   I
haven't heard any preferred versions on these.  I've been running  v10 for
several months now without issue.

-Chip


>
> Dan
>
> ___
> OmniOS-discuss mailing list
> OmniOS-discuss@lists.omniti.com
> http://lists.omniti.com/mailman/listinfo/omnios-discuss
>
___
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
http://lists.omniti.com/mailman/listinfo/omnios-discuss

Re: [OmniOS-discuss] LSI3108

[Dan McDonald]

> On May 23, 2016, at 4:10 PM, Fábio Rabelo  wrote:
> 
> Hi to all ...
> 
> You may need to flash the IT firmware :
> 
> http://www.avagotech.com/products/server-storage/host-bus-adapters/sas-9305-24i#downloads

And if you do, make sure it's version 19 or lower.  The IT firmware > 19 is 
known to be flaky.  Check the illumos list archives for details on why.

Dan

___
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
http://lists.omniti.com/mailman/listinfo/omnios-discuss

Re: [OmniOS-discuss] LSI3108

[Fábio Rabelo]

Hi to all ...

You may need to flash the IT firmware :

http://www.avagotech.com/products/server-storage/host-bus-adapters/sas-9305-24i#downloads


Fábio Rabelo

2016-05-23 16:19 GMT-03:00 Richard Skelton :
> Hi,
> I have SAS 9305-24i Host Bus Adapter but it not seen by OmniOS
> Which driver should it use? Can it be configured?
> Also the Intel X520-DA2 and the onboard  X540 are also not recognised.
> Both should use the ixgbe drive ?
> What information do you need to add to a OmniOS r15018 system.
>
>
> Dan McDonald wrote:
>
> On Mar 3, 2016, at 1:46 PM, Fábio Rabelo  wrote:
>
>
> I have a customer who wants to build a pure SSD Storage with Sandisk
> 12 Gb/s SAS interface !
>
>
> Get an LSI 3008-based card.  The 9300, for example.
>
> Dan
>
> ___
> OmniOS-discuss mailing list
> OmniOS-discuss@lists.omniti.com
> http://lists.omniti.com/mailman/listinfo/omnios-discuss
>
>
>
>
> ___
> OmniOS-discuss mailing list
> OmniOS-discuss@lists.omniti.com
> http://lists.omniti.com/mailman/listinfo/omnios-discuss
>
___
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
http://lists.omniti.com/mailman/listinfo/omnios-discuss

Re: [OmniOS-discuss] LSI3108

[Dan McDonald]

> On May 23, 2016, at 3:19 PM, Richard Skelton  wrote:
> 
> Hi,
> I have SAS 9305-24i Host Bus Adapter but it not seen by OmniOS 
> Which driver should it use? Can it be configured?

Sounds like it should be attachable via the mpt_sas driver.  Can you utter 
"lspci" and find the HBA you have on your system?  It's possible the PCI ID 
isn't in the list of known drivers.

> Also the Intel X520-DA2 and the onboard  X540 are also not recognised. 
> Both should use the ixgbe drive ?

This is REALLY weird, as both should as well.  Again, that "lspci" will help.

> What information do you need to add to a OmniOS r15018 system.

Everything you mention should already work.  I'm puzzled.

Dan

___
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
http://lists.omniti.com/mailman/listinfo/omnios-discuss

Re: [OmniOS-discuss] LSI3108

[Richard Skelton]

Hi,
I have SAS 9305-24i Host Bus Adapter but it not seen by OmniOS
Which driver should it use? Can it be configured?
Also the Intel X520-DA2 and the onboard  X540 are also not recognised.
Both should use the ixgbe drive ?
What information do you need to add to a OmniOS r15018 system.



Dan McDonald wrote:
>> On Mar 3, 2016, at 1:46 PM, Fábio Rabelo  wrote:
>>
>>
>> I have a customer who wants to build a pure SSD Storage with Sandisk
>> 12 Gb/s SAS interface !
>> 
>
> Get an LSI 3008-based card.  The 9300, for example.
>
> Dan
>
> ___
> OmniOS-discuss mailing list
> OmniOS-discuss@lists.omniti.com
> http://lists.omniti.com/mailman/listinfo/omnios-discuss
>
>   
___
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
http://lists.omniti.com/mailman/listinfo/omnios-discuss

Re: [OmniOS-discuss] LSI3108

[Matej Žerovnik]

I tried diskmap.py on a SAS3 LSI card today and it works, I just neede to 
change the path to sas ircu utils so it runs sas3ircu instead of sas2ircu.

Also, sas3ircu from lsi/avago page doesn’t work, you need an older version 
(5.00). You can find it on nexenta’s github: 
https://github.com/Nexenta/nza-userland/tree/master/nza-userland/components/sas3ircu/usr/sbin

lp, Matej

> On 03 Mar 2016, at 19:56, Richard Jahnel  wrote:
> 
> Speaking of which, does anyone have a diskmap.py that works with the sas3 lsi 
> cards?
> 
> Richard Jahnel
> Network Engineer
> On-Site.com | Ellipse Design
> 866-266-7483 ext. 4408
> Direct: 669-800-6270
> 
> -Original Message-
> From: OmniOS-discuss [mailto:omnios-discuss-boun...@lists.omniti.com] On 
> Behalf Of Dan McDonald
> Sent: Thursday, March 03, 2016 12:54 PM
> To: Fábio Rabelo ; Dan McDonald 
> Cc: omnios-discuss 
> Subject: Re: [OmniOS-discuss] LSI3108
> 
> 
>> On Mar 3, 2016, at 1:46 PM, Fábio Rabelo  wrote:
>> 
>> 
>> I have a customer who wants to build a pure SSD Storage with Sandisk
>> 12 Gb/s SAS interface !
> 
> Get an LSI 3008-based card.  The 9300, for example.
> 
> Dan
> 
> ___
> OmniOS-discuss mailing list
> OmniOS-discuss@lists.omniti.com
> http://lists.omniti.com/mailman/listinfo/omnios-discuss
> ___
> OmniOS-discuss mailing list
> OmniOS-discuss@lists.omniti.com
> http://lists.omniti.com/mailman/listinfo/omnios-discuss



smime.p7s
Description: S/MIME cryptographic signature
___
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
http://lists.omniti.com/mailman/listinfo/omnios-discuss

Re: [OmniOS-discuss] LSI3108

[Richard Jahnel]

You’re the best :)

Richard Jahnel
Network Engineer
On-Site.com | Ellipse Design
866-266-7483 ext. 4408
Direct: 669-800-6270

-Original Message-
From: Matej Žerovnik [mailto:ma...@zunaj.si] 
Sent: Friday, March 18, 2016 3:28 PM
To: Richard Jahnel 
Cc: Dan McDonald ; Fábio Rabelo ; 
omnios-discuss 
Subject: Re: [OmniOS-discuss] LSI3108

I tried diskmap.py on a SAS3 LSI card today and it works, I just neede to 
change the path to sas ircu utils so it runs sas3ircu instead of sas2ircu.

Also, sas3ircu from lsi/avago page doesn’t work, you need an older version 
(5.00). You can find it on nexenta’s github: 
https://github.com/Nexenta/nza-userland/tree/master/nza-userland/components/sas3ircu/usr/sbin

lp, Matej

> On 03 Mar 2016, at 19:56, Richard Jahnel  wrote:
> 
> Speaking of which, does anyone have a diskmap.py that works with the sas3 lsi 
> cards?
> 
> Richard Jahnel
> Network Engineer
> On-Site.com | Ellipse Design
> 866-266-7483 ext. 4408
> Direct: 669-800-6270
> 
> -Original Message-
> From: OmniOS-discuss [mailto:omnios-discuss-boun...@lists.omniti.com] On 
> Behalf Of Dan McDonald
> Sent: Thursday, March 03, 2016 12:54 PM
> To: Fábio Rabelo ; Dan McDonald 
> Cc: omnios-discuss 
> Subject: Re: [OmniOS-discuss] LSI3108
> 
> 
>> On Mar 3, 2016, at 1:46 PM, Fábio Rabelo  wrote:
>> 
>> 
>> I have a customer who wants to build a pure SSD Storage with Sandisk
>> 12 Gb/s SAS interface !
> 
> Get an LSI 3008-based card.  The 9300, for example.
> 
> Dan
> 
> ___
> OmniOS-discuss mailing list
> OmniOS-discuss@lists.omniti.com
> http://lists.omniti.com/mailman/listinfo/omnios-discuss
> ___
> OmniOS-discuss mailing list
> OmniOS-discuss@lists.omniti.com
> http://lists.omniti.com/mailman/listinfo/omnios-discuss

___
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
http://lists.omniti.com/mailman/listinfo/omnios-discuss

Re: [OmniOS-discuss] LSI3108

[Richard Jahnel]

Speaking of which, does anyone have a diskmap.py that works with the sas3 lsi 
cards?

Richard Jahnel
Network Engineer
On-Site.com | Ellipse Design
866-266-7483 ext. 4408
Direct: 669-800-6270

-Original Message-
From: OmniOS-discuss [mailto:omnios-discuss-boun...@lists.omniti.com] On Behalf 
Of Dan McDonald
Sent: Thursday, March 03, 2016 12:54 PM
To: Fábio Rabelo ; Dan McDonald 
Cc: omnios-discuss 
Subject: Re: [OmniOS-discuss] LSI3108


> On Mar 3, 2016, at 1:46 PM, Fábio Rabelo  wrote:
> 
> 
> I have a customer who wants to build a pure SSD Storage with Sandisk
> 12 Gb/s SAS interface !

Get an LSI 3008-based card.  The 9300, for example.

Dan

___
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
http://lists.omniti.com/mailman/listinfo/omnios-discuss
___
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
http://lists.omniti.com/mailman/listinfo/omnios-discuss

Re: [OmniOS-discuss] LSI3108

[Michael Rasmussen]

On Thu, 3 Mar 2016 15:46:15 -0300
Fábio Rabelo  wrote:

> 
> I do not have a choice to use 6 Gb/s HBAs ...
> 
According to specs 3008 also provides 12 Gb/s SAS?
http://www.avagotech.com/products/server-storage/io-controllers/sas-3008

-- 
Hilsen/Regards
Michael Rasmussen

Get my public GnuPG keys:
michael  rasmussen  cc
http://pgp.mit.edu:11371/pks/lookup?op=get&search=0xD3C9A00E
mir  datanom  net
http://pgp.mit.edu:11371/pks/lookup?op=get&search=0xE501F51C
mir  miras  org
http://pgp.mit.edu:11371/pks/lookup?op=get&search=0xE3E80917
--
/usr/games/fortune -es says:
It's better to be wanted for murder that not to be wanted at all.
-- Marty Winch


pgpeEPpamPrnC.pgp
Description: OpenPGP digital signature
___
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
http://lists.omniti.com/mailman/listinfo/omnios-discuss

Re: [OmniOS-discuss] LSI3108

[Dan McDonald]

> On Mar 3, 2016, at 1:46 PM, Fábio Rabelo  wrote:
> 
> 
> I have a customer who wants to build a pure SSD Storage with Sandisk
> 12 Gb/s SAS interface !

Get an LSI 3008-based card.  The 9300, for example.

Dan

___
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
http://lists.omniti.com/mailman/listinfo/omnios-discuss

Re: [OmniOS-discuss] LSI3108

[Fábio Rabelo]

I am a long time user of the IBM 1015 ..

Problem :

I have a customer who wants to build a pure SSD Storage with Sandisk
12 Gb/s SAS interface !

Is will run several SQL VMs in it to replace an aging SUN Server .

Capicce ??

I do not have a choice to use 6 Gb/s HBAs ...

Thanks ...


Fábio Rabelo

2016-03-03 13:06 GMT-03:00 Andy Fiddaman :
>
> On Thu, 3 Mar 2016, Dan McDonald wrote:
>
> ;
> ; > On Mar 3, 2016, at 9:17 AM, Martin Dojcak  wrote:
> ; >
> ; > Hi,
> ; >
> ; > look at illumos Hardware Compatibility List:
> ; >
> ; > http://illumos.org/hcl/
> ; >
> ; > there is support for LSI 3008 and 3108 hba
> ;
> ; Note that the 3108 is HW-RAID and uses the mr_sas(7D) driver, while 3008 
> (with IT firmware) is a simpler HBA and uses the mpt_sas(7D) driver.
>
> We are running some Dell R730s with PERC H730s (using LSI 3108) in
> pass-through mode with the mr_sas driver. No problems here but I'd still
> recommend choosing something that works with mpt_sas as that has been
> better maintained and is well tried and tested.
>
> reaper# (132) megacli -AdpAllInfo -a0
> ...
> Versions
> 
> Product Name: PERC H730 Mini
> Serial No   : 4CF00C5
> FW Package Build: 25.2.2-0004
> ...
> Direct PD Mapping: Yes
>
> dmesg:
>
> mr_sas0: 0x1000:0x5d 0x1028:0x1f49, irq:15 drv-ver:6.503.00.00ILLUMOS
> mr_sas0: TBOLT device detected
> mr_sas0: msi_enable = 1
> mr_sas0: enable_fp = 1
> mr_sas0: ctio_enable = 1
> mr_sas0 PCI Express-device: pci1028,1f49@0, mr_sas0
> mr_sas0 is /pci@0,0/pci8086,2f02@1/pci1028,1f49@0
> scsi: [ID 583861 kern.info] sd0 at mr_sas0: target 0 lun 1
> mr_sas0: Phys. device found: tgt 0 dtype 0: SEAGATE ST300MP0005
> scsi: [ID 583861 kern.info] sd1 at mr_sas0: target 1 lun 1
> mr_sas0: Phys. device found: tgt 1 dtype 0: SEAGATE ST300MP0005
> ...
>
>
> --
> Citrus IT Limited | +44 (0)870 199 8000 | enquir...@citrus-it.co.uk
> Rock House Farm | Green Moor | Wortley | Sheffield | S35 7DQ
> Registered in England and Wales | Company number 4899123
>
> ___
> OmniOS-discuss mailing list
> OmniOS-discuss@lists.omniti.com
> http://lists.omniti.com/mailman/listinfo/omnios-discuss
___
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
http://lists.omniti.com/mailman/listinfo/omnios-discuss

Re: [OmniOS-discuss] LSI3108

[Andy Fiddaman]

On Thu, 3 Mar 2016, Dan McDonald wrote:

;
; > On Mar 3, 2016, at 9:17 AM, Martin Dojcak  wrote:
; >
; > Hi,
; >
; > look at illumos Hardware Compatibility List:
; >
; > http://illumos.org/hcl/
; >
; > there is support for LSI 3008 and 3108 hba
;
; Note that the 3108 is HW-RAID and uses the mr_sas(7D) driver, while 3008 
(with IT firmware) is a simpler HBA and uses the mpt_sas(7D) driver.

We are running some Dell R730s with PERC H730s (using LSI 3108) in
pass-through mode with the mr_sas driver. No problems here but I'd still
recommend choosing something that works with mpt_sas as that has been
better maintained and is well tried and tested.

reaper# (132) megacli -AdpAllInfo -a0
...
Versions

Product Name: PERC H730 Mini
Serial No   : 4CF00C5
FW Package Build: 25.2.2-0004
...
Direct PD Mapping: Yes

dmesg:

mr_sas0: 0x1000:0x5d 0x1028:0x1f49, irq:15 drv-ver:6.503.00.00ILLUMOS
mr_sas0: TBOLT device detected
mr_sas0: msi_enable = 1
mr_sas0: enable_fp = 1
mr_sas0: ctio_enable = 1
mr_sas0 PCI Express-device: pci1028,1f49@0, mr_sas0
mr_sas0 is /pci@0,0/pci8086,2f02@1/pci1028,1f49@0
scsi: [ID 583861 kern.info] sd0 at mr_sas0: target 0 lun 1
mr_sas0: Phys. device found: tgt 0 dtype 0: SEAGATE ST300MP0005
scsi: [ID 583861 kern.info] sd1 at mr_sas0: target 1 lun 1
mr_sas0: Phys. device found: tgt 1 dtype 0: SEAGATE ST300MP0005
...


-- 
Citrus IT Limited | +44 (0)870 199 8000 | enquir...@citrus-it.co.uk
Rock House Farm | Green Moor | Wortley | Sheffield | S35 7DQ
Registered in England and Wales | Company number 4899123

___
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
http://lists.omniti.com/mailman/listinfo/omnios-discuss

Re: [OmniOS-discuss] LSI3108

[Fábio Rabelo]

OK, reading the manual for the controller ...

I do not found anything like "passthru"

What I did found was a fuction called "expose Hard Disk to Host" ...

And, looks like is is what I need 

Coming back when I have the card in my hands ...

Thanks again 


Fábio Rabelo

2016-03-03 12:31 GMT-03:00 Fábio Rabelo :

> OK ..
>
> So, I have to try it out at my own chance and risk ...
>
> Not today, but soon ...
>
> Thanks
>
>
> Fábio Rabelo
>
> 2016-03-03 12:25 GMT-03:00 Dan McDonald :
>
>>
>> > On Mar 3, 2016, at 10:21 AM, Fábio Rabelo 
>> wrote:
>> >
>> >
>> > If 3108 are  RAID, I still can configure my "tipical"  RAID Z3 using
>> each Hard Disk individualy ?
>> >
>> > Or OmniOS will only "see" the RAID array ?
>>
>> You'll have to use the MegaRAID BIOS crud to configure it to not HW-RAID
>> the drives.  Some of these let you have "passthru" which presents the raw
>> SCSI device up to the OS.  This is ideal.  Older ones (e.g. 2108) would
>> only let you create HW-RAID groups of one disk.  This adds a layer of
>> HW-RAID crap even though it's still a single drive.
>>
>> I know the 2208 would let you passthru.  I've never tried a 3108 board,
>> but I hope it's sane like the 2208.
>>
>> Dan
>>
>>
>
___
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
http://lists.omniti.com/mailman/listinfo/omnios-discuss

Re: [OmniOS-discuss] LSI3108

[Dan McDonald]

> On Mar 3, 2016, at 9:17 AM, Martin Dojcak  wrote:
> 
> Hi,
> 
> look at illumos Hardware Compatibility List:
> 
> http://illumos.org/hcl/
> 
> there is support for LSI 3008 and 3108 hba

Note that the 3108 is HW-RAID and uses the mr_sas(7D) driver, while 3008 (with 
IT firmware) is a simpler HBA and uses the mpt_sas(7D) driver.

Dan

___
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
http://lists.omniti.com/mailman/listinfo/omnios-discuss

Re: [OmniOS-discuss] LSI3108

[Martin Dojcak]

Hi,

look at illumos Hardware Compatibility List:

http://illumos.org/hcl/

there is support for LSI 3008 and 3108 hba

MD

On 03/03/2016 03:00 PM, Fábio Rabelo wrote:
> Hi to all
> 
> I just did a try in google to find if recent LSI3108 are supported in OmniOS, 
> but did not
> find anuthing ..
> 
> Someone knows the answer ?
> 
> Recent SAS 12 GB/s LSI 3008 and 3108 works with OmniOS ?
> 
> 
> Fábio Rabelo
> 
> 
> ___
> OmniOS-discuss mailing list
> OmniOS-discuss@lists.omniti.com
> http://lists.omniti.com/mailman/listinfo/omnios-discuss
> 

-- 
Martin Dojčák

pgp: http://pgp.dojcak.sk/
___
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
http://lists.omniti.com/mailman/listinfo/omnios-discuss

[OmniOS-discuss] LSI3108

[Fábio Rabelo]

Hi to all

I just did a try in google to find if recent LSI3108 are supported in
OmniOS, but did not find anuthing ..

Someone knows the answer ?

Recent SAS 12 GB/s LSI 3008 and 3108 works with OmniOS ?


Fábio Rabelo
___
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
http://lists.omniti.com/mailman/listinfo/omnios-discuss