[onap-discuss] [cli] [policy] other onap cli resources

2017-07-05 Thread HERNANDEZ-HERRERO, JORGE 
Hello CLI team,

I would like to bring to your attention some capabilities we are making use in 
the policy/drools-pdp project to provide a CLI shell which wraps its REST APIs. 
   It capitalizes in third party tooling: http-prompt + swagger specification 
to provide a filesystem-like navigation illusion (using cd, and ls) with auto 
completion.   One of the things that may be different after going through the 
CLI project documentation is that it provides a non-flat, hierarchical 
structure of resources, on which operations can be applied (the http verbs).
 Doc is primitive on our side, but you can check its basic usage on the 2 
subpages of 
https://wiki.onap.org/display/DW/Deploying+and+Debugging+the+Policy+Platform 
(telemetry shell).

Best regards,
Jorge
___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss

Re: [onap-discuss] [clamp][holmes][dcae][policy]CLAMP - Policy - DCAE - HOLMES meeting

2017-07-05 Thread HERNANDEZ-HERRERO, JORGE 
Greetings Guangrong,

I’d like to point out that policy/drools-pdp project repo contains a generic 
drools engine which is similar in scope to what Holmes provides.   It is 
currently used by what we call operational policies, but it is *generic* and 
can be used for any flavor of rules, as long as they are mavenized and 
drools-based applications.  It supports interaction through the DMaaP and 
generic REST servers capabilities.   It just seems to me there is a bit of 
synergy between what the “Holmes” (the actual Holmes box in the diagram) and 
what the drools-pdp project currently does. I will be glad to share 
additional information if interested.   I could also join first half of the 
DCAE meeting tomorrow if you wish to talk more about it.

Best regards,

Jorge
From: onap-discuss-boun...@lists.onap.org 
[mailto:onap-discuss-boun...@lists.onap.org] On Behalf Of 
fu.guangr...@zte.com.cn
Sent: Wednesday, July 05, 2017 9:33 AM
To: onap-discuss@lists.onap.org
Subject: [onap-discuss] [clamp][holmes][dcae][policy]CLAMP - Policy - DCAE - 
HOLMES meeting


Greetings folks,



It was such a pleasure to have all of you from relevant projects to discuss 
about the deployment solution of Holmes and relevant workflows. Thank you very 
much.



As agreed, we will go on with the dicussion using the timeslot of DCAE weekly 
meeting tomorrow. It'll be great if you could share the documents/materials 
you've shown to us so that we could look them through in advance and perform

a much more efficient meeting tomorrow.



Attached is the slides on Holmes we have discussed today. If you have any 
questions, please feel free to contact me and I'll respond ASAP.



Thanks and regards,



Guangrong








___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss

Re: [onap-discuss] DCAE meeting and contributors

2017-07-05 Thread VENKATESH KUMAR, VIJAY 
Dear DCAE Members,
Just FYI, the weekly DCAE meeting for 7/6 (Thursday) will be repurposed to 
continue discussion on HOLMES, DCAE, Policy and CLAMP integration topic. You 
are welcome to join if you are interested in these discussion.

Action-item for contributors signed up for the DCAE project:
Please update below table to include email, component interested and percentage 
of time you will be able to dedicate to DCAE work in R1.
https://wiki.onap.org/pages/viewpage.action?pageId=3247121#DCAE(5/11/17)-Contributors

For anyone looking to contribute to the DCAE project, please feel free to add 
yourself with the requested information. However if you are listed as 
contributor and you are unable to do so for R1, kindly remove yourself from the 
list.

Regards,
Vijay





___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss

[onap-discuss] [aaf] Application Authorization Framework - Project PTL Nominations

2017-07-05 Thread GUDISENA, VARUNESHWAR 
Hello AAF Committers,
On behalf of Ram Koya, I would like to nominate Ram Koya for the role of PTL 
for AAF.


Ram Koya have been working in the technology sector for over 25 years. His 
technical experience and expertise ranges across multiple disciplines, from 
micro services, virtual containers, cloud computing and web platform to mobile 
platforms.

He currently works for AT Over the course of his career, he has worked as a 
developer, development manager, architect, lead architect, technical manager 
and associate director.


Since last year, he has been working in the initiative to open source ECOMP, 
now ONAP. He has extensive experience with Agile software development and look 
forward to working with this diverse team if his nomination is accepted.

Thanks
Varun
Sr. Software Engineer
AT Services, Inc.

211 S Akard St,
Dallas ,TX 75202
Ph: 617-834-4157


___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss

Re: [onap-discuss] YANG.XML format

2017-07-05 Thread Thomas Nadeau 
+1

While I’d love for all the new features in 1.1 to be available, the bottom line 
is as Brian said: actual production device support which in my estimation will 
take a bit longer.

--Tom


From: onap-discuss-boun...@lists.onap.org 
[mailto:onap-discuss-boun...@lists.onap.org] On Behalf Of FREEMAN, BRIAN D
Sent: Wednesday, July 5, 2017 4:12 PM
To: NOSHPITZ, CLAUDE ; LANDO, MICHAEL ; 
Kedar Ambekar ; ROZIN, EDEN 
Cc: WRIGHT, STEVEN A ; onap-discuss@lists.onap.org
Subject: Re: [onap-discuss] YANG.XML format

The industry is still on yang 1.0 so I would focus on that version for now.

Yang 1.1 is emerging and ODL Carbon has limited support for it but its very 
new. I only know of one device that supposedly supports yang 1.1.

Brian


From: 
onap-discuss-boun...@lists.onap.org 
[mailto:onap-discuss-boun...@lists.onap.org] On Behalf Of NOSHPITZ, CLAUDE
Sent: Wednesday, July 05, 2017 4:08 PM
To: LANDO, MICHAEL >; Kedar 
Ambekar >; ROZIN, EDEN 
>
Cc: WRIGHT, STEVEN A >; 
onap-discuss@lists.onap.org
Subject: Re: [onap-discuss] YANG.XML format

***Security Advisory: This Message Originated Outside of AT ***
Reference http://cso.att.com/EmailSecurity/IDSP.html for more information.
Is there a normative set of RFCs/standards that we plan to adhere to for the 
YANG work in ONAP?
I’m asking as an observer (without specific YANG expertise :-) wanting to make 
sure we pave the way for a coherent developer experience moving forward.

The ONAP Wiki references RFC 
6020
 (YANG 1.0) -- is this superseded (?) by RFC 
7950
 (YANG 1.1)?

And then there’s the JSON encoding proposed in RFC 
7951.
  It would be useful to consolidate around a consistent representation, given 
that different toolchains/consumers may need to interoperate.

Is there a need to reference the various core data models (RFCs 
6991,
 
7223,
 
7317,
 and all their friends), or is their use otherwise clearly implied?

There was discussion along these lines in the “VNF Management Requirements for 
OpenECOMP” 
document,
 which is seeded into the VNF Requirements project.  Maybe the questions I’m 
asking (and those that Kedar posed previously) just ought to be referred to 
that workstream…

Thanks!

--Claude


From: 
>
 on behalf of "LANDO, MICHAEL" >
Date: Wednesday, July 5, 2017 at 11:09 AM
To: Kedar Ambekar >, 
"onap-discuss@lists.onap.org" 
>, "ROZIN, 
EDEN" >
Subject: Re: [onap-discuss] YANG.XML format

***Security Advisory: This Message Originated Outside of AT ***
Reference http://cso.att.com/EmailSecurity/IDSP.html for more information.
+Edan


BR,

Michael Lando
Opensource &

Re: [onap-discuss] [multicloud] Multi-VIM API

2017-07-05 Thread NOSHPITZ, CLAUDE 
It sounds like the immediate-term goal is just to provide a nearly-transparent 
wrapper around OpenStack API structures.   This would evidently leverage 
Keystone (or some service-catalog function that is very Keystone-like) to 
return appropriate endpoints based on metadata according to "specific 
parameters (coming from AAI)".

That said, it's not clear how we intend to bridge this approach to multi-VIM 
scenarios in the sense of providers that aren't OpenStack or even 
OpenStack-like.  It makes sense that the crawl-walk-run approach would dictate 
doing what we already know how to do (OpenStack API) first – but it is 
important to keep an eye on the near-horizon, where commercial CSPs and other 
private-cloud implementations are going to be of direct relevance.

Is there a notion that it’d be possible over time to create OpenStack-like 
wrappers over other infrastructure providers, create custom Heat resources, and 
so on?

Or are we more aligned with a move toward provider-neutral data models and 
abstracted API adapters?

As a matter of personal opinion, I’d prefer the latter… but there could be fair 
reasons to take a different approach.

Thanks!

--Claude


From:  on behalf of 
"eric.deb...@orange.com" 
Date: Wednesday, July 5, 2017 at 12:40 PM
To: "onap-discuss@lists.onap.org" 
Subject: [onap-discuss] [multicloud] Multi-VIM API


We need to clarify the API definition. The Multi-VIM will be used by SO, APPC, 
VFC for Infra Resource and VNF LCM.

SO, APPC, VFC will not use OpenStack direct API to request resource creation 
(using Heat or Nova API). SO, APPC & VFC will request the Multi-VIM API (to be 
defined).

SO, APPC, VFC require some specific parameters (coming from AAI) to route 
towards the right VIM

It is key to define the multi-VIM northbound API for the various components 
that will consume it.

Regards,

Eric


_



Ce message et ses pieces jointes peuvent contenir des informations 
confidentielles ou privilegiees et ne doivent donc

pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce 
message par erreur, veuillez le signaler

a l'expediteur et le detruire ainsi que les pieces jointes. Les messages 
electroniques etant susceptibles d'alteration,

Orange decline toute responsabilite si ce message a ete altere, deforme ou 
falsifie. Merci.



This message and its attachments may contain confidential or privileged 
information that may be protected by law;

they should not be distributed, used or copied without authorisation.

If you have received this email in error, please notify the sender and delete 
this message and its attachments.

As emails may be altered, Orange is not liable for messages that have been 
modified, changed or falsified.

Thank you.
___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss

Re: [onap-discuss] YANG.XML format

2017-07-05 Thread Ryan Goulding 
+1, support for Yang 1.1 was added in ODL Carbon, but that is still on the
initial release so take it for what it is worth for the time being.  It
will be hardened over time.

Regards,

Ryan Goulding

On Wed, Jul 5, 2017 at 4:11 PM, FREEMAN, BRIAN D  wrote:

> The industry is still on yang 1.0 so I would focus on that version for now.
>
>
>
> Yang 1.1 is emerging and ODL Carbon has limited support for it but its
> very new. I only know of one device that supposedly supports yang 1.1.
>
>
>
> Brian
>
>
>
>
>
> *From:* onap-discuss-boun...@lists.onap.org [mailto:onap-discuss-bounces@
> lists.onap.org] *On Behalf Of *NOSHPITZ, CLAUDE
> *Sent:* Wednesday, July 05, 2017 4:08 PM
> *To:* LANDO, MICHAEL ; Kedar Ambekar
> ; ROZIN, EDEN 
> *Cc:* WRIGHT, STEVEN A ; onap-discuss@lists.onap.org
> *Subject:* Re: [onap-discuss] YANG.XML format
>
>
>
> Security Advisory:* This Message Originated Outside of AT ***
>
> Reference http://cso.att.com/EmailSecurity/IDSP.html for more information.
>
> Is there a normative set of RFCs/standards that we plan to adhere to for
> the YANG work in ONAP?
>
> I’m asking as an observer (without specific YANG expertise :-) wanting to
> make sure we pave the way for a coherent developer experience moving
> forward.
>
>
>
> The ONAP Wiki references RFC 6020
> 
> (YANG 1.0) -- is this superseded (?) by RFC 7950
> 
> (YANG 1.1)?
>
>
>
> And then there’s the JSON encoding proposed in RFC 7951
> .
> It would be useful to consolidate around a consistent representation, given
> that different toolchains/consumers may need to interoperate.
>
>
>
> Is there a need to reference the various core data models (RFCs 6991
> ,
> 7223
> ,
> 7317
> ,
> and all their friends), or is their use otherwise clearly implied?
>
>
>
> There was discussion along these lines in the “VNF Management
> Requirements for OpenECOMP” document
> ,
> which is seeded into the VNF Requirements project.  Maybe the questions I’m
> asking (and those that Kedar posed previously) just ought to be referred to
> that workstream…
>
>
>
> Thanks!
>
>
>
> --Claude
>
>
>
>
>
> *From: * on behalf of "LANDO,
> MICHAEL" 
> *Date: *Wednesday, July 5, 2017 at 11:09 AM
> *To: *Kedar Ambekar , "
> onap-discuss@lists.onap.org" , "ROZIN, EDEN"
> 
> *Subject: *Re: [onap-discuss] YANG.XML format
>
>
>
> Security Advisory:* This Message Originated Outside of AT ***
> Reference http://cso.att.com/EmailSecurity/IDSP.html for more information.
>
> +Edan
>
>
>
>
>
> *BR,*
>
>
>
> *Michael Lando*
>
> Opensource & Frontend Team Lead, SDC
>
> AT Network Application Development · NetCom
>
> Tel Aviv | Tampa | Atlanta | New Jersey |Chicago
>
> 
> ···
>
> *Office*: +972 (3) 5451487 <+972%203-545-1487>
>
> *Mobile*: +972 (54) 7833603 <+972%2054-783-3603>
>
> *e-mail*: *ml6...@intl.att.com *
>
>
>
>
>
> *From:* onap-discuss-boun...@lists.onap.org [mailto:onap-discuss-bounces@
> lists.onap.org ] *On Behalf Of *Kedar

Re: [onap-discuss] YANG.XML format

2017-07-05 Thread FREEMAN, BRIAN D 
The industry is still on yang 1.0 so I would focus on that version for now.

Yang 1.1 is emerging and ODL Carbon has limited support for it but its very 
new. I only know of one device that supposedly supports yang 1.1.

Brian


From: onap-discuss-boun...@lists.onap.org 
[mailto:onap-discuss-boun...@lists.onap.org] On Behalf Of NOSHPITZ, CLAUDE
Sent: Wednesday, July 05, 2017 4:08 PM
To: LANDO, MICHAEL ; Kedar Ambekar 
; ROZIN, EDEN 
Cc: WRIGHT, STEVEN A ; onap-discuss@lists.onap.org
Subject: Re: [onap-discuss] YANG.XML format

***Security Advisory: This Message Originated Outside of AT ***
Reference http://cso.att.com/EmailSecurity/IDSP.html for more information.
Is there a normative set of RFCs/standards that we plan to adhere to for the 
YANG work in ONAP?
I’m asking as an observer (without specific YANG expertise :-) wanting to make 
sure we pave the way for a coherent developer experience moving forward.

The ONAP Wiki references RFC 
6020
 (YANG 1.0) -- is this superseded (?) by RFC 
7950
 (YANG 1.1)?

And then there’s the JSON encoding proposed in RFC 
7951.
  It would be useful to consolidate around a consistent representation, given 
that different toolchains/consumers may need to interoperate.

Is there a need to reference the various core data models (RFCs 
6991,
 
7223,
 
7317,
 and all their friends), or is their use otherwise clearly implied?

There was discussion along these lines in the “VNF Management Requirements for 
OpenECOMP” 
document,
 which is seeded into the VNF Requirements project.  Maybe the questions I’m 
asking (and those that Kedar posed previously) just ought to be referred to 
that workstream…

Thanks!

--Claude


From: 
>
 on behalf of "LANDO, MICHAEL" >
Date: Wednesday, July 5, 2017 at 11:09 AM
To: Kedar Ambekar >, 
"onap-discuss@lists.onap.org" 
>, "ROZIN, 
EDEN" >
Subject: Re: [onap-discuss] YANG.XML format

***Security Advisory: This Message Originated Outside of AT ***
Reference http://cso.att.com/EmailSecurity/IDSP.html for more information.

+Edan


BR,

Michael Lando
Opensource & Frontend Team Lead, SDC
AT Network Application Development · NetCom
Tel Aviv | Tampa | Atlanta | New Jersey |Chicago
···
Office: +972 (3) 5451487
Mobile: +972 (54) 7833603
e-mail: ml6...@intl.att.com


From: 
onap-discuss-boun...@lists.onap.org 
[mailto:onap-discuss-boun...@lists.onap.org] On Behalf Of Kedar Ambekar
Sent: Thursday, June 08, 2017 4:17 AM
To: onap-discuss@lists.onap.org
Subject: Re: [onap-discuss] YANG.XML format

Hi Michael,

Couple of questions around YANG.


  1.  If I have YANG model from VNF Vendor in JSON format, can I use it in SDC 
? Or it accepts only in XML format ?
  2.  Not remember where, but I

Re: [onap-discuss] YANG.XML format

2017-07-05 Thread NOSHPITZ, CLAUDE 
Is there a normative set of RFCs/standards that we plan to adhere to for the 
YANG work in ONAP?
I’m asking as an observer (without specific YANG expertise :-) wanting to make 
sure we pave the way for a coherent developer experience moving forward.

The ONAP Wiki references RFC 6020 
(YANG 1.0) -- is this superseded (?) by RFC 
7950 (YANG 1.1)?

And then there’s the JSON encoding proposed in RFC 
7951.  It would be useful to consolidate 
around a consistent representation, given that different toolchains/consumers 
may need to interoperate.

Is there a need to reference the various core data models (RFCs 
6991, 
7223, 
7317, and all their friends), or is 
their use otherwise clearly implied?

There was discussion along these lines in the “VNF Management Requirements for 
OpenECOMP” 
document,
 which is seeded into the VNF Requirements project.  Maybe the questions I’m 
asking (and those that Kedar posed previously) just ought to be referred to 
that workstream…

Thanks!

--Claude

From:  on behalf of "LANDO, MICHAEL" 

Date: Wednesday, July 5, 2017 at 11:09 AM
To: Kedar Ambekar , "onap-discuss@lists.onap.org" 
, "ROZIN, EDEN" 
Subject: Re: [onap-discuss] YANG.XML format

***Security Advisory: This Message Originated Outside of AT ***
Reference http://cso.att.com/EmailSecurity/IDSP.html for more information.


+Edan


BR,

Michael Lando
Opensource & Frontend Team Lead, SDC
AT Network Application Development · NetCom
Tel Aviv | Tampa | Atlanta | New Jersey |Chicago
···
Office: +972 (3) 5451487
Mobile: +972 (54) 7833603
e-mail: ml6...@intl.att.com


From: onap-discuss-boun...@lists.onap.org 
[mailto:onap-discuss-boun...@lists.onap.org] On Behalf Of Kedar Ambekar
Sent: Thursday, June 08, 2017 4:17 AM
To: onap-discuss@lists.onap.org
Subject: Re: [onap-discuss] YANG.XML format

Hi Michael,

Couple of questions around YANG.


  1.  If I have YANG model from VNF Vendor in JSON format, can I use it in SDC 
? Or it accepts only in XML format ?
  2.  Not remember where, but I read that ONAP SDC does not distribute YANG 
model to SDNC. Is this correct ?
  3.  If # 2 is correct, can YANG be fed directly to SDNC by invoking any API ? 
ODL API ?

Thank you..

From: 
onap-discuss-boun...@lists.onap.org 
[mailto:onap-discuss-boun...@lists.onap.org] On Behalf Of Lando,Michael
Sent: Monday, June 5, 2017 3:56 AM
To: Law, Owen >; 
onap-discuss@lists.onap.org
Subject: Re: [onap-discuss] YANG.XML format

The current guide line is that the file be a valid xml and that the file ending 
be.xml.
No additional requirements/validations are done for this artifact.


BR,

Michael Lando
Opensource & Frontend Team Lead, SDC
AT Network Application Development · NetCom
Tel Aviv | Tampa | Atlanta | New Jersey |Chicago
···
Office: +972 (3) 5451487
Mobile: +972 (54) 7833603
e-mail: ml6...@intl.att.com


From: 
onap-discuss-boun...@lists.onap.org 
[mailto:onap-discuss-boun...@lists.onap.org] On Behalf Of Law, Owen
Sent: Thursday, May 25, 2017 2:35 AM
To: onap-discuss@lists.onap.org
Subject: [onap-discuss] YANG.XML format

Hi ONAPers:

There is an option in SDC to add deployment artefacts as part of the service 
composition – is there a specific guideline on what format is needed for the 
YANG.XML  ?

Regards
Owen

Disclaimer:  This message and the information contained herein is proprietary 
and confidential and subject to the Tech Mahindra policy statement, you may 
review the policy at 
http://www.techmahindra.com/Disclaimer.html
 externally

[onap-discuss] vCPE use case discussions: VNF onboarding, SDC and CLAMP - Follow-up

2017-07-05 Thread Yoav Kluger 
BEGIN:VCALENDAR
METHOD:REQUEST
PRODID:Microsoft Exchange Server 2010
VERSION:2.0
BEGIN:VTIMEZONE
TZID:Israel Standard Time
BEGIN:STANDARD
DTSTART:16010101T02
TZOFFSETFROM:+0300
TZOFFSETTO:+0200
RRULE:FREQ=YEARLY;INTERVAL=1;BYDAY=-1SU;BYMONTH=10
END:STANDARD
BEGIN:DAYLIGHT
DTSTART:16010101T02
TZOFFSETFROM:+0200
TZOFFSETTO:+0300
RRULE:FREQ=YEARLY;INTERVAL=1;BYDAY=4FR;BYMONTH=3
END:DAYLIGHT
END:VTIMEZONE
BEGIN:VEVENT
ORGANIZER;CN=Yoav Kluger:MAILTO:yoav.klu...@amdocs.com
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN=Kang Xi:MA
 ILTO:kang...@huawei.com
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN=Yunxia Che
 n:MAILTO:helen.c...@huawei.com
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN=Liuguangmi
 n:MAILTO:liuguang...@huawei.com
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN=Liyifeng (
 liyifeng):MAILTO:lee.liyif...@huawei.com
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN=Jon Fannar
  Karlsson Taylor:MAILTO:jon.tay...@amdocs.com
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN="'SPATSCHEC
 K, OLIVER  (OLIVER)'":MAILTO:spat...@research.att.com
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN='Lingli De
 ng':MAILTO:denglin...@chinamobile.com
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN='Kenny Pau
 l':MAILTO:kp...@linuxfoundation.org
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN="Yang Xu (Y
 ang, Fixed Network)":MAILTO:yang@huawei.com
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN="'FREEMAN, 
 BRIAN D'":MAILTO:bf1...@att.com
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN="'LEFEVRE, 
 CATHERINE'":MAILTO:cl6...@intl.att.com
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN="'ROSE, DAN
 IEL V'":MAILTO:dr6...@att.com
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN=onap-discu
 s...@lists.onap.org:MAILTO:onap-discuss@lists.onap.org
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN='wangcheng
 l...@chinamobile.com':MAILTO:'wangchen...@chinamobile.com'
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN='platania@
 research.att.com':MAILTO:'plata...@research.att.com'
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN='cc697w@in
 tl.att.com':MAILTO:'cc6...@intl.att.com'
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN='ac2550@in
 tl.att.com':MAILTO:'ac2...@intl.att.com'
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN='spondonde
 y...@att.com':MAILTO:'spondon...@att.com'
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN='ha076r@at
 t.com':MAILTO:'ha0...@att.com'
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN='vanbrakle
 @att.com':MAILTO:'vanbra...@att.com'
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN='xiaolong.
 k...@orange.com':MAILTO:'xiaolong.k...@orange.com'
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN='francois.
 desp...@orange.com':MAILTO:'francois.desp...@orange.com'
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN='yangyi.br
 i...@chinatelecom.cn':MAILTO:'yangyi@chinatelecom.cn'
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN=Alla Goldn
 er:MAILTO:alla.gold...@amdocs.com
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN='Anatoly A
 ndrianov':MAILTO:anatoly.andria...@nokia.com
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN=Andrei Koj
 ukhov:MAILTO:andrei.kojuk...@amdocs.com
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN=Avi Chapni
 ck:MAILTO:avi.chap...@amdocs.com
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN='Eric Debe
 au':MAILTO:eric.deb...@orange.com
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN='George La
 piotis':MAILTO:george.lapio...@ericsson.com
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN='Gil BULLA
 RD':MAILTO:wb5...@att.com
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN=denghui (L
 ):MAILTO:denghu...@huawei.com
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN=Zengjiangu
 o (OSS Design):MAILTO:zengjian...@huawei.com
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN='John Zann
 os':MAILTO:jaazan...@gmail.com
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN=Liron Shtr
 aichman:MAILTO:liron.shtraich...@amdocs.com
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN='Maopeng Z
 hang':MAILTO:zhang.maope...@zte.com.cn
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN=Mark Pond:
 MAILTO:mp...@amdocs.com
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN='Mazin Gil
 bert':MAILTO:ma...@research.att.com
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN='Nagesha S
 ubramanya':MAILTO:nagesha.subrama...@nokia.com

[onap-discuss] [multicloud] Multi-VIM API

2017-07-05 Thread eric.debeau 
We need to clarify the API definition. The Multi-VIM will be used by SO, APPC, 
VFC for Infra Resource and VNF LCM.

SO, APPC, VFC will not use OpenStack direct API to request resource creation 
(using Heat or Nova API). SO, APPC & VFC will request the Multi-VIM API (to be 
defined).

SO, APPC, VFC require some specific parameters (coming from AAI) to route 
towards the right VIM

It is key to define the multi-VIM northbound API for the various components 
that will consume it.

Regards,

Eric


_

Ce message et ses pieces jointes peuvent contenir des informations 
confidentielles ou privilegiees et ne doivent donc
pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce 
message par erreur, veuillez le signaler
a l'expediteur et le detruire ainsi que les pieces jointes. Les messages 
electroniques etant susceptibles d'alteration,
Orange decline toute responsabilite si ce message a ete altere, deforme ou 
falsifie. Merci.

This message and its attachments may contain confidential or privileged 
information that may be protected by law;
they should not be distributed, used or copied without authorisation.
If you have received this email in error, please notify the sender and delete 
this message and its attachments.
As emails may be altered, Orange is not liable for messages that have been 
modified, changed or falsified.
Thank you.

___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss

Re: [onap-discuss] DMaaP - source code location

2017-07-05 Thread GUDISENA, VARUNESHWAR 
Below is the link for message router source code:
https://github.com/att/dmaap-framework/tree/master/Msgrtr

I will move this source code to Gerrit repos later.

-Varun



From: onap-discuss-boun...@lists.onap.org 
[mailto:onap-discuss-boun...@lists.onap.org] On Behalf Of Suyash Jaiswal
Sent: Monday, July 03, 2017 7:27 AM
To: onap-discuss@lists.onap.org
Subject: [onap-discuss] DMaaP - source code location

Hi All,

My ONAP deployment has a message-router component deployed. I guess, this is 
the message bus, DMaaP. I tried to look at the source code of DMaaP but the 
project file is empty. Is the source code of DMaaP not open sourced?
Can someone point me the location of the source code of DMaaP?


With Best Regards,
Suyash Jaiswal
This message and the information contained herein is proprietary and 
confidential and subject to the Amdocs policy statement,
you may review at 
https://www.amdocs.com/about/email-disclaimer
___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss

Re: [onap-discuss] SDN-C Code flow Queries

2017-07-05 Thread FREEMAN, BRIAN D 
Some replies inline.

Brian


From: onap-discuss-boun...@lists.onap.org 
[mailto:onap-discuss-boun...@lists.onap.org] On Behalf Of Arun Arora (c)
Sent: Wednesday, July 05, 2017 10:14 AM
To: onap-discuss@lists.onap.org
Subject: [onap-discuss] SDN-C Code flow Queries


Hi There,



We are trying to understand the SDN-C code flow from its Northbound interface 
to Southbound Controllers which manage the controlled devices.



Following is our understanding till now (build from ONAP Wiki and code reading):

1)   SDN-C is based on ODL framework

>> yes

2)  ONAP has added SLI which understands the network configuration workflow
>> yes

3)  The DG builder builds different models (using YANG, XML). These models 
are then converted into SVC Recopies [Recipies]
>> not quite. DG Builder builds the logic for processing rpc requests that are 
>> in yang models. 1 rpc == 1 DG

  >> 1 DG can call other DGs as needed to keep the size of any 
single DG manageable and to create re-useable DGs

4)  SLI consumes into SVC Recopies to execute the network configuration 
workflow contained in the recipe
>> yes the RPC in the yang model is a service recipe - the "input" data is the 
>> minimum data set needed for the service.
>> the directed graph would then execute to fill out the rest of the containers 
>> in the model in the right sequence including assigning resources and 
>> calculating attributs as needed. Finally the DG at the ends of the branches 
>> would convert/map network data to the device specific attributes in config 
>> nodes.

5)  Effectively the workflow is passed to one of he underlying Network 
Adaptors which actually configure the necessary network resources
>> I hesitate to call it a workflow - it is procedural logic meant to run to 
>> complete quickly and deal with devices not people and uses in some cases 
>> network signaling protocols like BGP
>> it is the adapters that do the real work of "safe changes in state" of the 
>> network which includes things like applying engineering rules to the 
>> resource assignments and calculated network attributes (think calculating 
>> static routes from newly assigned ip addresses for example)

6)  The update (success/ failure) is sent to MSO and AAI once the request 
is complete
>> yes.  Although the response is to MSO. AAI is updated on success or failure 
>> as appropriate. SDNC is the source of truth for network data in AAI that is 
>> set/configured/assingned by SDNC.



Following are the code modules we know till now:

1)  From MSO mso-sdn-adaptor calls VNFAPIProvider() in SDNCAdpaterRest.java

2)  VNFApiProvider() - receives the request and invokes the 
activate/configure services
>> the VNFApiProvider is the simplest case of MSO-SDNC interaction and really 
>> is used for dealing with L4-L7 VNFs that have a need for resource assignment 
>> but not any controller configuration.



Questions:

  1.  We have seen multiple entry pointers across SDN-C/SLI, dmaplisterner, 
uebClient, admportal and dgbuilder. But the interaction of these with each 
other, VnfAPIProvider()  and southbound interfaces is not clear

>> you need to separate design time / onboarding vs run time.

>> dgbuilder is used as design time to create directed graphs. It is not used 
>> during run time. In fact we dont deploy it in production SDNC instnaces we 
>> use the desktop version and check the json strings into git.

>> admin portal is only used to load/modify directed graphs and interact with 
>> mysql at design time if needed.

>> uebclient is deprecated and it will go away - it was replaced with the 
>> dmapplistener

>> dmaaplistener is used during onboarding when new models are distributed from 
>> SDNC

>> SDNC/SLI is the run time component that is called when a REST RPC request is 
>> sent into the controller. A provider class is called by the rpc and this in 
>> turn pulls the xml form of the directed graph from mysql and calls the 
>> "execute" function othe SvcLogic object.

2) Post, VnfAPIProvider() how the allocateResourceL3SDN()and later the 
Southbound Adpator APIs are called is not known

  >> SDNC is nto demonstrating them in this release. The southbound 
adapter of interest in SDNC is probably the aai adapter. You can see how the DG 
updates AAI in the activate and delete sub-direcged graphs

  >> I would also point you to the tutorial on the wiki on the 
creating a netconf mount on APPC from SDNC's VNF API DG.


While we are trying to understand the code further, if anyone can give some 
pointers or explain the codeflow on a broader level, it would be extremely 
helpful.





Thanks,

Arun Arora


___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss

[onap-discuss] SDC kickoff meeting

2017-07-05 Thread Lando,Michael 
BEGIN:VCALENDAR
METHOD:REQUEST
PRODID:Microsoft Exchange Server 2010
VERSION:2.0
BEGIN:VTIMEZONE
TZID:Israel Standard Time
BEGIN:STANDARD
DTSTART:16010101T02
TZOFFSETFROM:+0300
TZOFFSETTO:+0200
RRULE:FREQ=YEARLY;INTERVAL=1;BYDAY=-1SU;BYMONTH=10
END:STANDARD
BEGIN:DAYLIGHT
DTSTART:16010101T02
TZOFFSETFROM:+0200
TZOFFSETTO:+0300
RRULE:FREQ=YEARLY;INTERVAL=1;BYDAY=4FR;BYMONTH=3
END:DAYLIGHT
END:VTIMEZONE
BEGIN:VEVENT
ORGANIZER;CN="Lando,Michael":MAILTO:ml6...@intl.att.com
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN=onap-discu
 s...@lists.onap.org:MAILTO:onap-discuss@lists.onap.org
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN="ZIV, AVI":M
 AILTO:avi@amdocs.com
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN="SHADMI, DA
 VID":MAILTO:ds2...@att.com
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN="Rozin, Ede
 n":MAILTO:er4...@intl.att.com
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN="Kapeluto, 
 Zahi":MAILTO:zk0...@intl.att.com
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN=lironsh@am
 docs.com:MAILTO:liro...@amdocs.com
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN=Halfon.Tal
 @amdocs.com:MAILTO:halfon@amdocs.com
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN="POND, MARK"
 :MAILTO:mp...@amdocs.com
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN="LU, TINGTI
 NG":MAILTO:tl2...@att.com
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN=saw.jin@hu
 awei.com:MAILTO:saw@huawei.com
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN=luna.lu@hu
 awei.com:MAILTO:luna...@huawei.com
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN=bin.hou@hu
 awei.com:MAILTO:bin@huawei.com
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN=chenchuany
 u...@huawei.com:MAILTO:chenchua...@huawei.com
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN="WEST, EARL
 E":MAILTO:ew8...@att.com
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN=zhoujun8@h
 uawei.com:MAILTO:zhouj...@huawei.com
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN=tsithara@i
 n.ibm.com:MAILTO:tsith...@in.ibm.com
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN="SHAH, GAUT
 AM":MAILTO:gaut...@amdocs.com
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN="EMPOROPULO
 , VITALIY":MAILTO:vitaliy.emporop...@amdocs.com
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN=meng.zhaox
 i...@zte.com.cn:MAILTO:meng.zhaoxi...@zte.com.cn
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN=zhao.huabi
 n...@zte.com.cn:MAILTO:zhao.huab...@zte.com.cn
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN=lv.bo163@z
 te.com.cn:MAILTO:lv.bo...@zte.com.cn
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN=li.zi30@zt
 e.com.cn:MAILTO:li.z...@zte.com.cn
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN=sun.qi310@
 zte.com.cn:MAILTO:sun.qi...@zte.com.cn
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN=an.ho@huaw
 ei.com:MAILTO:an...@huawei.com
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN=kang.xi@hu
 awei.com:MAILTO:kang...@huawei.com
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN=chong.li@h
 uawei.com:MAILTO:chong...@huawei.com
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN=rene.rober
 t...@orange.com:MAILTO:rene.rob...@orange.com
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN="Grinberg, 
 Moti":MAILTO:mg8...@intl.att.com
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN=shentao@ch
 inamobile.com:MAILTO:shen...@chinamobile.com
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN=yangyuanwe
 i...@boco.com.cn:MAILTO:yangyuan...@boco.com.cn
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN=zhongheliu
 @boco.com.cn:MAILTO:zhonghe...@boco.com.cn
DESCRIPTION;LANGUAGE=en-US:Hi\,\nI was requested to set up a kick off meeti
 ng before the R1 review.\n\nI understand that not everybody will be able t
 o attend on such a short notice.\n\nNext week I will set up meetings accor
 ding to the doodle poll results.\n\nThe meeting will cover planes for R1 a
 nd introductions.\n\nFor the first meeting we will use connect for the con
 france.\n\nTo join AT Connect Conference:\n-
 ---\nClick here: https://connect10.uc.att.com/alphatest/meet/?
 ExEventID=83540294=M\n\nFor dialing-in only:\n---\n
 1.Dial one of the numbers listed below\n2. When prompted\, enter the meeti
 ng access code: 3540294#\n  * Toll-Free Number (in USA): 1-809-413-184
 .\n  * Blackberry (Toll-Free Number): 1809413184x3540294#\n  * iPh
 one / Android (Toll-Free Number): 1809413184\,\,3540294#\n  * Windows 
 Phone (Toll-Free Number):

[onap-discuss] Updated Invitation: [vfc] Weekly Meeting @ Weekly from 6pm to 7pm on Sunday (PDT) (onap-discuss@lists.onap.org)

2017-07-05 Thread kpaul 
BEGIN:VCALENDAR
PRODID:-//Google Inc//Google Calendar 70.9054//EN
VERSION:2.0
CALSCALE:GREGORIAN
METHOD:REQUEST
BEGIN:VTIMEZONE
TZID:Asia/Shanghai
X-LIC-LOCATION:Asia/Shanghai
BEGIN:STANDARD
TZOFFSETFROM:+0800
TZOFFSETTO:+0800
TZNAME:CST
DTSTART:19700101T00
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=Asia/Shanghai:20170710T09
DTEND;TZID=Asia/Shanghai:20170710T10
RRULE:FREQ=WEEKLY;BYDAY=MO
DTSTAMP:20170705T181929Z
ORGANIZER;CN=ONAP Meetings and Events:mailto:linuxfoundation.org_1rmtb5tpr3
 uc8f76fmflplo...@group.calendar.google.com
UID:si634pibi1i8rtmdej5876dclk_r20170710t010...@google.com
ATTENDEE;CUTYPE=INDIVIDUAL;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=
 TRUE;CN=onap-discuss@lists.onap.org;X-NUM-GUESTS=0:mailto:onap-discuss@list
 s.onap.org
ATTENDEE;CUTYPE=INDIVIDUAL;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=
 TRUE;CN=yangya...@chinamobile.com;X-NUM-GUESTS=0:mailto:yangyanyj@chinamobi
 le.com
CLASS:PUBLIC
CREATED:20170602T224718Z
DESCRIPTION:Hi there\, \n\nONAP Meeting 2 is inviting you to a scheduled Zo
 om meeting. \n\nJoin from PC\, Mac\, Linux\, iOS or Android: https://zoom.u
 s/j/621738721\n\nOr iPhone one-tap (US Toll):  +16465588656\,621738721# or 
 +14086380968\,621738721#\n\nOr Telephone:\nDial: +1 646 558 8656 (US To
 ll) or +1 408 638 0968 (US Toll)\nMeeting ID: 621 738 721\nInternat
 ional numbers available: https://zoom.us/zoomconference?m=YBi1POWf1KxIr5sB1
 uQfsm0WHlAnv3Zp\n\n\nView your event at https://www.google.com/calendar/eve
 nt?action=VIEW=c2k2MzRwaWJpMWk4cnRtZGVqNTg3NmRjbGtfUjIwMTcwNzEwVDAxMDAw
 MCBvbmFwLWRpc2N1c3NAbGlzdHMub25hcC5vcmc=NzIjbGludXhmb3VuZGF0aW9uLm9yZ18
 xcm10YjV0cHIzdWM4Zjc2Zm1mbHBsb2k4OEBncm91cC5jYWxlbmRhci5nb29nbGUuY29tNDNmMG
 U2Yzk5ZjU5ZjA0ZWE0MjBkYmYxODk4MzMzMWJlMWE1YjM5NQ=America/Los_Angeles
 =en.
LAST-MODIFIED:20170705T181929Z
LOCATION:https://zoom.us/j/621738721
SEQUENCE:2
STATUS:CONFIRMED
SUMMARY:[vfc] Weekly Meeting
TRANSP:TRANSPARENT
END:VEVENT
END:VCALENDAR


invite.ics
Description: application/ics
___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss

[onap-discuss] Updated Invitation: VF-C Weekly Meeting @ Weekly from 6pm to 7pm on Sunday (PDT) (onap-discuss@lists.onap.org)

2017-07-05 Thread kpaul 
BEGIN:VCALENDAR
PRODID:-//Google Inc//Google Calendar 70.9054//EN
VERSION:2.0
CALSCALE:GREGORIAN
METHOD:REQUEST
BEGIN:VTIMEZONE
TZID:Asia/Shanghai
X-LIC-LOCATION:Asia/Shanghai
BEGIN:STANDARD
TZOFFSETFROM:+0800
TZOFFSETTO:+0800
TZNAME:CST
DTSTART:19700101T00
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=Asia/Shanghai:20170703T09
DTEND;TZID=Asia/Shanghai:20170703T10
RRULE:FREQ=WEEKLY;UNTIL=20170710T005959Z;BYDAY=MO
DTSTAMP:20170705T181929Z
ORGANIZER;CN=ONAP Meetings and Events:mailto:linuxfoundation.org_1rmtb5tpr3
 uc8f76fmflplo...@group.calendar.google.com
UID:si634pibi1i8rtmdej5876d...@google.com
ATTENDEE;CUTYPE=INDIVIDUAL;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=
 TRUE;CN=onap-discuss@lists.onap.org;X-NUM-GUESTS=0:mailto:onap-discuss@list
 s.onap.org
ATTENDEE;CUTYPE=INDIVIDUAL;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=
 TRUE;CN=yangya...@chinamobile.com;X-NUM-GUESTS=0:mailto:yangyanyj@chinamobi
 le.com
CLASS:PUBLIC
CREATED:20170602T224718Z
DESCRIPTION:Hi there\, \n\nONAP Meeting 2 is inviting you to a scheduled Zo
 om meeting. \n\nJoin from PC\, Mac\, Linux\, iOS or Android: https://zoom.u
 s/j/621738721\n\nOr iPhone one-tap (US Toll):  +16465588656\,621738721# or 
 +14086380968\,621738721#\n\nOr Telephone:\nDial: +1 646 558 8656 (US To
 ll) or +1 408 638 0968 (US Toll)\nMeeting ID: 621 738 721\nInternat
 ional numbers available: https://zoom.us/zoomconference?m=YBi1POWf1KxIr5sB1
 uQfsm0WHlAnv3Zp\n\n\nView your event at https://www.google.com/calendar/eve
 nt?action=VIEW=c2k2MzRwaWJpMWk4cnRtZGVqNTg3NmRjbGsgb25hcC1kaXNjdXNzQGxp
 c3RzLm9uYXAub3Jn=NzIjbGludXhmb3VuZGF0aW9uLm9yZ18xcm10YjV0cHIzdWM4Zjc2Zm
 1mbHBsb2k4OEBncm91cC5jYWxlbmRhci5nb29nbGUuY29tYWUxZDBkN2Y5NWMyYzE4ZmEyZjcxZ
 GMyYjc4ZGE5Njc4M2UyYmQ1Yg=America/Los_Angeles=en.
LAST-MODIFIED:20170705T181929Z
LOCATION:https://zoom.us/j/621738721
SEQUENCE:2
STATUS:CONFIRMED
SUMMARY:VF-C Weekly Meeting
TRANSP:TRANSPARENT
END:VEVENT
END:VCALENDAR


invite.ics
Description: application/ics
___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss

Re: [onap-discuss] YANG.XML format

2017-07-05 Thread Lando,Michael 
+Edan


BR,

Michael Lando
Opensource & Frontend Team Lead, SDC
AT Network Application Development · NetCom
Tel Aviv | Tampa | Atlanta | New Jersey |Chicago
···
Office: +972 (3) 5451487
Mobile: +972 (54) 7833603
e-mail: ml6...@intl.att.com


From: onap-discuss-boun...@lists.onap.org 
[mailto:onap-discuss-boun...@lists.onap.org] On Behalf Of Kedar Ambekar
Sent: Thursday, June 08, 2017 4:17 AM
To: onap-discuss@lists.onap.org
Subject: Re: [onap-discuss] YANG.XML format

Hi Michael,

Couple of questions around YANG.


1.   If I have YANG model from VNF Vendor in JSON format, can I use it in 
SDC ? Or it accepts only in XML format ?

2.   Not remember where, but I read that ONAP SDC does not distribute YANG 
model to SDNC. Is this correct ?

3.   If # 2 is correct, can YANG be fed directly to SDNC by invoking any 
API ? ODL API ?

Thank you..

From: 
onap-discuss-boun...@lists.onap.org 
[mailto:onap-discuss-boun...@lists.onap.org] On Behalf Of Lando,Michael
Sent: Monday, June 5, 2017 3:56 AM
To: Law, Owen >; 
onap-discuss@lists.onap.org
Subject: Re: [onap-discuss] YANG.XML format

The current guide line is that the file be a valid xml and that the file ending 
be.xml.
No additional requirements/validations are done for this artifact.


BR,

Michael Lando
Opensource & Frontend Team Lead, SDC
AT Network Application Development · NetCom
Tel Aviv | Tampa | Atlanta | New Jersey |Chicago
···
Office: +972 (3) 5451487
Mobile: +972 (54) 7833603
e-mail: ml6...@intl.att.com


From: 
onap-discuss-boun...@lists.onap.org 
[mailto:onap-discuss-boun...@lists.onap.org] On Behalf Of Law, Owen
Sent: Thursday, May 25, 2017 2:35 AM
To: onap-discuss@lists.onap.org
Subject: [onap-discuss] YANG.XML format

Hi ONAPers:

There is an option in SDC to add deployment artefacts as part of the service 
composition – is there a specific guideline on what format is needed for the 
YANG.XML  ?

Regards
Owen

Disclaimer:  This message and the information contained herein is proprietary 
and confidential and subject to the Tech Mahindra policy statement, you may 
review the policy at 
http://www.techmahindra.com/Disclaimer.html
 externally 
http://tim.techmahindra.com/tim/disclaimer.html
 internally within TechMahindra.

___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss

[onap-discuss] Updated Invitation: [cli] Weekly Mtg @ Weekly from 7am to 8am on Wednesday (PDT) (onap-discuss@lists.onap.org)

2017-07-05 Thread kpaul 
BEGIN:VCALENDAR
PRODID:-//Google Inc//Google Calendar 70.9054//EN
VERSION:2.0
CALSCALE:GREGORIAN
METHOD:REQUEST
BEGIN:VTIMEZONE
TZID:America/Los_Angeles
X-LIC-LOCATION:America/Los_Angeles
BEGIN:DAYLIGHT
TZOFFSETFROM:-0800
TZOFFSETTO:-0700
TZNAME:PDT
DTSTART:19700308T02
RRULE:FREQ=YEARLY;BYMONTH=3;BYDAY=2SU
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0700
TZOFFSETTO:-0800
TZNAME:PST
DTSTART:19701101T02
RRULE:FREQ=YEARLY;BYMONTH=11;BYDAY=1SU
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20170712T07
DTEND;TZID=America/Los_Angeles:20170712T08
RRULE:FREQ=WEEKLY;BYDAY=WE
DTSTAMP:20170705T175748Z
ORGANIZER;CN=ONAP Meetings and Events:mailto:linuxfoundation.org_1rmtb5tpr3
 uc8f76fmflplo...@group.calendar.google.com
UID:a22sf2ihom56ctulgn16kpb...@google.com
ATTENDEE;CUTYPE=INDIVIDUAL;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=
 TRUE;CN=onap-discuss@lists.onap.org;X-NUM-GUESTS=0:mailto:onap-discuss@list
 s.onap.org
ATTENDEE;CUTYPE=INDIVIDUAL;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=
 TRUE;CN=kanagaraj.manic...@huawei.com;X-NUM-GUESTS=0:mailto:kanagaraj.manic
 k...@huawei.com
CREATED:20170705T175704Z
DESCRIPTION:Rescheduled to correct timezone error -kenny\n\nONAP Meeting 7 
 is inviting you to a scheduled Zoom meeting. \n\nJoin from PC\, Mac\, Linux
 \, iOS or Android: https://zoom.us/j/181688681\n\nOr iPhone one-tap (US Tol
 l):  +16465588656\,\,181688681# or +14086380968\,\,181688681#\n\nOr Telepho
 ne:\nDial: +1 646 558 8656 (US Toll) or +1 408 638 0968 (US Toll)\n
 +1 855 880 1246 (US Toll Free)\n+1 877 369 0926 (US Toll Free)\nMee
 ting ID: 181 688 681\nInternational numbers available: https://zoom.us/
 zoomconference?m=EaTwMtxTr3tVWTvKFmYnffSewNlfzbW-\n\n\nView your event at h
 ttps://www.google.com/calendar/event?action=VIEW=YTIyc2YyaWhvbTU2Y3R1bG
 duMTZrcGJtYzQgb25hcC1kaXNjdXNzQGxpc3RzLm9uYXAub3Jn=NzIjbGludXhmb3VuZGF0
 aW9uLm9yZ18xcm10YjV0cHIzdWM4Zjc2Zm1mbHBsb2k4OEBncm91cC5jYWxlbmRhci5nb29nbGU
 uY29tZDA1ZjYwN2M0N2VmY2E3NjZhOTQ4ODc4ZWJkZDk4NWNlYzc0NzI5OA=America/Los
 _Angeles=en.
LAST-MODIFIED:20170705T175747Z
LOCATION:https://zoom.us/j/181688681
SEQUENCE:0
STATUS:CONFIRMED
SUMMARY:[cli] Weekly Mtg
TRANSP:OPAQUE
END:VEVENT
END:VCALENDAR


invite.ics
Description: application/ics
___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss

[onap-discuss] Updated Invitation: [cli] Weekly Meeting @ Weekly from 7pm to 8pm on Tuesday from Tue Jul 4 to Tue Jul 4 (PDT) (onap-discuss@lists.onap.org)

2017-07-05 Thread kpaul 
BEGIN:VCALENDAR
PRODID:-//Google Inc//Google Calendar 70.9054//EN
VERSION:2.0
CALSCALE:GREGORIAN
METHOD:REQUEST
BEGIN:VTIMEZONE
TZID:America/Los_Angeles
X-LIC-LOCATION:America/Los_Angeles
BEGIN:DAYLIGHT
TZOFFSETFROM:-0800
TZOFFSETTO:-0700
TZNAME:PDT
DTSTART:19700308T02
RRULE:FREQ=YEARLY;BYMONTH=3;BYDAY=2SU
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0700
TZOFFSETTO:-0800
TZNAME:PST
DTSTART:19701101T02
RRULE:FREQ=YEARLY;BYMONTH=11;BYDAY=1SU
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20170704T19
DTEND;TZID=America/Los_Angeles:20170704T20
RRULE:FREQ=WEEKLY;UNTIL=20170705T02Z;BYDAY=TU
DTSTAMP:20170705T174905Z
ORGANIZER;CN=ONAP Meetings and Events:mailto:linuxfoundation.org_1rmtb5tpr3
 uc8f76fmflplo...@group.calendar.google.com
UID:pumj824jtga0ujhmueabdnv...@google.com
ATTENDEE;CUTYPE=INDIVIDUAL;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=
 TRUE;CN=onap-discuss@lists.onap.org;X-NUM-GUESTS=0:mailto:onap-discuss@list
 s.onap.org
ATTENDEE;CUTYPE=INDIVIDUAL;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=
 TRUE;CN=kanagaraj.manic...@huawei.com;X-NUM-GUESTS=0:mailto:kanagaraj.manic
 k...@huawei.com
CREATED:20170629T214744Z
DESCRIPTION:Hi there\, \n\nONAP Meeting 6 is inviting you to a scheduled Zo
 om meeting. \n\nJoin from PC\, Mac\, Linux\, iOS or Android: https://zoom.u
 s/j/692664175\n\nOr iPhone one-tap (US Toll):  +16465588656\,\,692664175# o
 r +14086380968\,\,692664175#\n\nOr Telephone:\nDial: +1 646 558 8656 (U
 S Toll) or +1 408 638 0968 (US Toll)\n+1 855 880 1246 (US Toll Free)\n 
+1 877 369 0926 (US Toll Free)\nMeeting ID: 692 664 175\nInterna
 tional numbers available: https://zoom.us/zoomconference?m=uikx5ks8yAJEJ2oU
 FMUMi_W7bVNpAbH-\n\n\nView your event at https://www.google.com/calendar/ev
 ent?action=VIEW=cHVtajgyNGp0Z2EwdWpobXVlYWJkbnZmamMgb25hcC1kaXNjdXNzQGx
 pc3RzLm9uYXAub3Jn=NzIjbGludXhmb3VuZGF0aW9uLm9yZ18xcm10YjV0cHIzdWM4Zjc2Z
 m1mbHBsb2k4OEBncm91cC5jYWxlbmRhci5nb29nbGUuY29tMzdjMDg4YmUyN2YyMzQwNzIyMzBm
 NWQ3YjBkN2I5NDNiNDM4MzYwMA=America/Los_Angeles=en.
LAST-MODIFIED:20170705T174905Z
LOCATION:https://zoom.us/j/692664175
SEQUENCE:0
STATUS:CONFIRMED
SUMMARY:[cli] Weekly Meeting
TRANSP:OPAQUE
END:VEVENT
END:VCALENDAR


invite.ics
Description: application/ics
___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss

Re: [onap-discuss] [SDC Documentation]

2017-07-05 Thread Lando,Michael 
Hi,
The links are working now.


BR,

Michael Lando
Opensource & Frontend Team Lead, SDC
AT Network Application Development * NetCom
Tel Aviv | Tampa | Atlanta | New Jersey |Chicago
***
Office: +972 (3) 5451487
Mobile: +972 (54) 7833603
e-mail: ml6...@intl.att.com


From: onap-discuss-boun...@lists.onap.org 
[mailto:onap-discuss-boun...@lists.onap.org] On Behalf Of eric.deb...@orange.com
Sent: Friday, June 23, 2017 8:39 PM
To: onap-discuss@lists.onap.org
Subject: [onap-discuss] [SDC Documentation]

Hello

On the SDC wiki 
(https://wiki.onap.org/pages/viewpage.action?pageId=1015837),
 2 documents are referenced for the SDC documentation, but are not available on 
the wiki.

<>, under the section "Design", describes how to use 
the SDC.

See the <> for a specific example of how to onboard a 
Virtual Network Function, using SDC.
Is it possible to upload them ?

Thanks.

Regards

Eric

_



Ce message et ses pieces jointes peuvent contenir des informations 
confidentielles ou privilegiees et ne doivent donc

pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce 
message par erreur, veuillez le signaler

a l'expediteur et le detruire ainsi que les pieces jointes. Les messages 
electroniques etant susceptibles d'alteration,

Orange decline toute responsabilite si ce message a ete altere, deforme ou 
falsifie. Merci.



This message and its attachments may contain confidential or privileged 
information that may be protected by law;

they should not be distributed, used or copied without authorisation.

If you have received this email in error, please notify the sender and delete 
this message and its attachments.

As emails may be altered, Orange is not liable for messages that have been 
modified, changed or falsified.

Thank you.
___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss

Re: [onap-discuss] [sdc] Error while using openecomp-ui / webseal simulator

2017-07-05 Thread Lando,Michael 
The option of openecomp ui will only allow you access to the onboarding.
For full functionality you will still need the webseal simulator to access the 
system.

Since you are setting up you private envurment please share the full process 
you did so that we will be able to upload it and share it with all users.


BR,

Michael Lando
Opensource & Frontend Team Lead, SDC
AT Network Application Development · NetCom
Tel Aviv | Tampa | Atlanta | New Jersey |Chicago
···
Office: +972 (3) 5451487
Mobile: +972 (54) 7833603
e-mail: ml6...@intl.att.com


From: Viswa KSP [mailto:kspviswa.git...@gmail.com]
Sent: Wednesday, July 05, 2017 7:37 PM
To: Lando,Michael 
Cc: onap-discuss@lists.onap.org
Subject: Re: [onap-discuss] [sdc] Error while using openecomp-ui / webseal 
simulator

Hi Michael,

Prime intent for me is to stand-up SDC on stand-alone mode and explore the 
functionality ( and potential extensions ) of SDC.
Going through 
READ.ME,
 I understood that, webseal simulator / openecomp-ui can be used to talk to SDC 
FE without having to come via portal application.

That's where I ran npm start under openecomp-ui and hit with above issue.

Could you help me test SDC in standalone mode? Please let me know what am i 
missing w.r.t configuration.

BR,
Viswa


On Wed, Jul 5, 2017 at 7:39 PM, Lando,Michael 
> wrote:
On the latest code you do not need to run npm install.
It is part of the mvn build flow.
In order to create a valide wars for our application you only need to run mavn 
build


BR,

Michael Lando
Opensource & Frontend Team Lead, SDC
AT Network Application Development · NetCom
Tel Aviv | Tampa | Atlanta | New Jersey |Chicago
···
Office: +972 (3) 5451487
Mobile: +972 (54) 7833603
e-mail: 
ml6...@intl.att.com>


From: Viswa KSP 
[mailto:kspviswa.git...@gmail.com]
Sent: Wednesday, July 05, 2017 5:05 PM
To: Lando,Michael >
Cc: onap-discuss@lists.onap.org
Subject: Re: [onap-discuss] [sdc] Error while using openecomp-ui / webseal 
simulator

Yup. I did a full build using mvn clean install under sdc-main root.
Then, ran npm install under dox-sequence-diagram-ui, openecomp-u.
Then, rebuilt node-saas module ( hit error on MAC OS ).

And finally changed devConfig.json to point to sdc-be and then hit npm start.

It went on for a while and then hit with above error.

BR,
Viswa

On Wed, Jul 5, 2017 at 7:06 PM, Lando,Michael 
>>
 wrote:
Ok.
You are using mvn clean install from the root dir right?


BR,

Michael Lando
Opensource & Frontend Team Lead, SDC
AT Network Application Development · NetCom
Tel Aviv | Tampa | Atlanta | New Jersey |Chicago
···
Office: +972 (3) 5451487
Mobile: +972 (54) 7833603
e-mail: 
ml6...@intl.att.com>>>


From: Viswa KSP 
[mailto:kspviswa.git...@gmail.com>]
Sent: Wednesday, July 05, 2017 4:36 PM
To: Lando,Michael 
>>
Cc: 
onap-discuss@lists.onap.org>
Subject: Re: [onap-discuss] [sdc] Error while using openecomp-ui / webseal 
simulator

Hi Michael,

It is on master and I'm on direct internet connection.

BR,
Viswa

On Wed, Jul 5, 2017 at 6:46 PM, Lando,Michael 
>

Re: [onap-discuss] [sdc] Error while using openecomp-ui / webseal simulator

2017-07-05 Thread Viswa KSP 
Hi Michael,

Prime intent for me is to stand-up SDC on stand-alone mode and explore the
functionality ( and potential extensions ) of SDC.
Going through READ.ME, I understood that, webseal simulator / openecomp-ui
can be used to talk to SDC FE without having to come via portal application.

That's where I ran npm start under openecomp-ui and hit with above issue.

Could you help me test SDC in standalone mode? Please let me know what am i
missing w.r.t configuration.

BR,
Viswa


On Wed, Jul 5, 2017 at 7:39 PM, Lando,Michael  wrote:

> On the latest code you do not need to run npm install.
> It is part of the mvn build flow.
> In order to create a valide wars for our application you only need to run
> mavn build
>
>
> BR,
>
> Michael Lando
> Opensource & Frontend Team Lead, SDC
> AT Network Application Development · NetCom
> Tel Aviv | Tampa | Atlanta | New Jersey |Chicago
> 
> ···
> Office: +972 (3) 5451487
> Mobile: +972 (54) 7833603
> e-mail: ml6...@intl.att.com
>
>
> From: Viswa KSP [mailto:kspviswa.git...@gmail.com]
> Sent: Wednesday, July 05, 2017 5:05 PM
> To: Lando,Michael 
> Cc: onap-discuss@lists.onap.org
> Subject: Re: [onap-discuss] [sdc] Error while using openecomp-ui / webseal
> simulator
>
> Yup. I did a full build using mvn clean install under sdc-main root.
> Then, ran npm install under dox-sequence-diagram-ui, openecomp-u.
> Then, rebuilt node-saas module ( hit error on MAC OS ).
>
> And finally changed devConfig.json to point to sdc-be and then hit npm
> start.
>
> It went on for a while and then hit with above error.
>
> BR,
> Viswa
>
> On Wed, Jul 5, 2017 at 7:06 PM, Lando,Michael > wrote:
> Ok.
> You are using mvn clean install from the root dir right?
>
>
> BR,
>
> Michael Lando
> Opensource & Frontend Team Lead, SDC
> AT Network Application Development · NetCom
> Tel Aviv | Tampa | Atlanta | New Jersey |Chicago
> 
> ···
> Office: +972 (3) 5451487
> Mobile: +972 (54) 7833603
> e-mail: ml6...@intl.att.com r...@intl.att.com>
>
>
> From: Viswa KSP [mailto:kspviswa.git...@gmail.com gmail.com>]
> Sent: Wednesday, July 05, 2017 4:36 PM
> To: Lando,Michael >
> Cc: onap-discuss@lists.onap.org
> Subject: Re: [onap-discuss] [sdc] Error while using openecomp-ui / webseal
> simulator
>
> Hi Michael,
>
> It is on master and I'm on direct internet connection.
>
> BR,
> Viswa
>
> On Wed, Jul 5, 2017 at 6:46 PM, Lando,Michael >>
> wrote:
> Hi,
> What branch are you working from?
> Are you behind a proxy when you are compiling?
>
>
> BR,
>
> Michael Lando
> Opensource & Frontend Team Lead, SDC
> AT Network Application Development · NetCom
> Tel Aviv | Tampa | Atlanta | New Jersey |Chicago
> 
> ···
> Office: +972 (3) 5451487
> Mobile: +972 (54) 7833603
> e-mail: ml6...@intl.att.com r...@intl.att.com>  intl.att.com>>>
>
>
> From: onap-discuss-boun...@lists.onap.org boun...@lists.onap.org>> [mailto:onap-discuss-bounces@
> lists.onap.org onap-discuss-boun...@lists.onap.org discuss-boun...@lists.onap.org>>] On Behalf Of Viswa KSP
> Sent: Wednesday, July 05, 2017 3:43 PM
> To: onap-discuss@lists.onap.org >>
> Subject: [onap-discuss] [sdc] Error while using openecomp-ui / webseal
> simulator
>
> Dear All,
>
> I tried to stand-up SDC in standalone mode as per READ.ME<
> https://urldefense.proofpoint.com/v2/url?u=http-
> 3A__READ.ME=DwMFaQ=LFYZ-o9_HUMeMTSQicvjIg=
> FYvXSElfSmWIXOeZxWIxQysejuz9-TXmaL6uftBh8MY=NWs2RfEV-xTmXAjU_ywmQNZBy_
> xcg6WxpUXptCvjMhQ=--lZl51lS4Ph_f1hIMF445P9HeO1b3mfJdg8UskD78s=><
> https://urldefense.proofpoint.com/v2/url?u=http-
> 3A__READ.ME=DwMFaQ=LFYZ-o9_HUMeMTSQicvjIg=
> FYvXSElfSmWIXOeZxWIxQysejuz9-TXmaL6uftBh8MY=
> J6348ySRE3qIraTk21je16V7zjAt6ulphKab_P_UsC0=
> cqpgZid0i68XrQQSGRClI8sLD6WP_FE79zh0U1d92NY=> urldefense.proofpoint.com/v2/url?u=http-3A__READ.ME=DwMFaQ=LFYZ-o9_
> HUMeMTSQicvjIg=FYvXSElfSmWIXOeZxWIxQysejuz9-TXmaL6uftBh8MY=1_
> ppYbu4ywRMXDT7H6lIKL_VJG4QMEePhL5GVIIt7aY=xq7AYzKDiGEonTBCX2XdwBfNcdpihh
> 2Ybq2CwhfRxiY=> in openecomp-ui

Re: [onap-discuss] DCAE Collector: Missing Listener on Port 8080 for messages from Firewall

2017-07-05 Thread VENKATESH KUMAR, VIJAY 
Josef,
The listener runs inside the dcae-collector-common-event service on the DCAE 
col VM.

Once you are inside the container - you could run below to confirm


1)  Run -> netstat -an | grep 8080

Should get something like below

tcp0  0 0.0.0.0:80800.0.0.0:*   LISTEN


Also if you tail on VES manager logs (/opt/app/manager/logs/manager.log) - it 
would report health status info.



2)  If #1 doesn't give any result and manager reports 
VESCollecter_Is_Not_Running, then you could bring it up manually 
"/opt/app/VESCollector/bin/VESrestfulCollector.sh start" command.


Thanks,
Vijay

From: onap-discuss-boun...@lists.onap.org 
[mailto:onap-discuss-boun...@lists.onap.org] On Behalf Of Josef Reisinger
Sent: Monday, July 03, 2017 6:43 AM
To: onap-discuss 
Subject: [onap-discuss] DCAE Collector: Missing Listener on Port 8080 for 
messages from Firewall

Folks,
I was at a point where I could see measurement data to be sent from the 
firewall to DCAE controller, port 8080. Since a restart last Friday, the 
listener on port 8080 has vanished. More details here: 
https://wiki.onap.org/questions/8228818/dcae-collector-does-not-listen-port-8080-anymore
Any hint for me?

Mit freundlichen Grüßen / Kind regards
Josef Reisinger
When wisdom comes to call, there's nobody listening at all - Pendragon / Man Of 
Nomadic Traits

IBM Sales & Distribution, Communications Sector
Certified IT-Architect Telecommunications
IBM Certified Telecommunications Industry ITA
Lehrbeauftragter an der Hochschule Fresenius

IBM Deutschland
Godesberger Allee 127
53175 Bonn Beuel

Phone:+49 151 1426 4559
Mobile:  +49-(0) 151 1426 4559
E-Mail:  josef.reisin...@de.ibm.com




___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss

[onap-discuss] SDC R1 commitment and meeting setup

2017-07-05 Thread Lando,Michael 
Hi,
I am trying to collect a commitment for R1 from the people who signed on to 
contribute to the project.
I am attaching a link to the mail with a place to input in a percentage of how 
much time you will be able to dedicate to SDC work in this release.
https://wiki.onap.org/display/DW/Resources+and+Repositories#ResourcesandRepositories-ServiceDesign

In addition I am attaching a poll to select a time where we can start having 
our weekly meeting since we are all located in different time zones this will 
allow us to sync the meeting tie so that people will be able to attend.
Since the people who are who want to contribute are spared in different 
countries we will not be able to have a single meeting that will accommodate 
all so as a solution we will have two meeting.

https://urldefense.proofpoint.com/v2/url?u=http-3A__doodle.com_poll_8e7z4x4w6gxa7ih2=DwIFaQ=LFYZ-o9_HUMeMTSQicvjIg=FYvXSElfSmWIXOeZxWIxQysejuz9-TXmaL6uftBh8MY=kKgcxHaW7dHM6LwRzsmsacJV3sSoiCsTZ9tOjDLp1Q4=2El6kSfb3gV5joL4mX7aNq4en8wPhSHAJfFIsLRAjbI=

If anyone wants to join the project feel free to add yourself to the resources 
list.

If you are receiving the mail and you do not plane to contribute please remove 
yourself from the resource list.

Once we finalize this items I we create a mailing list for the project.




BR,

Michael Lando
Opensource & Frontend Team Lead, SDC
AT Network Application Development * NetCom
Tel Aviv | Tampa | Atlanta | New Jersey |Chicago
***
Office: +972 (3) 5451487
Mobile: +972 (54) 7833603
e-mail: ml6...@intl.att.com


___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss

[onap-discuss] Meeting Reminder ! Thanks   ///Re: Zoom ID Notice.  Time: wednesday(9 PM China, 1 PM UTC, 9 AM US/Eastern, 5th July )   ////FW: [onap-tsc] The aproach of interact with External System.

2017-07-05 Thread li.zi30 
原始邮件



发件人：李滋00164331
收件人：    
   
赵化冰10201488
抄送人：  
日 期 ：2017年07月05日 09:25
主 题 ：Zoom ID Notice.  Time: wednesday(9 PM China, 1 PM UTC, 9 AM US/Eastern, 
5th July )   FW: [onap-tsc][onap-discuss] The aproach of interact with 
External System. PTLs pay attention please 









Hi There,




Kenny has already set up a Zoom ID for ESR. The Zoom detail see below. Hope to 
discuss with you.




ESR Meeting
Hi there, 
ONAP Meeting 7 is inviting you to a scheduled Zoom meeting.


Join from PC, Mac, Linux, iOS or Android: https://zoom.us/j/434830725


Or iPhone one-tap (US Toll):  +16465588656,,434830725# or 
+14086380968,,434830725#


Or Telephone:Dial: +1 646 558 8656 (US Toll) or +1 408 638 0968 (US Toll)   
 +1 855 880 1246 (US Toll Free)+1 877 369 0926 (US Toll Free)Meeting 
ID: 434 830 725International numbers available: 
https://zoom.us/zoomconference?m=Va3Jg8p0-BZUnCV0JLW90sn3ozepN21M






Thanks,


LiZi























发件人：李滋00164331
收件人：    
   
赵化冰10201488 
抄送人：  
日 期 ：2017年06月30日 16:02
主 题 ：[onap-tsc][onap-discuss] The aproach of interact with External System. 
PTLs pay attention please






Hi PTLs,




Since each project have a PTL and acording to last TSC meeting, we still need 
feed back from SO/APP-C/ONAP SDN-C team. See detail for the table below.





I will set up a meeting next wednesday(9 PM China, 1 PM UTC, 9 AM US/Eastern, 
5th July ) to discuss about the approach of your project to interact with 
External system. If you can not attend, please call for a proxy or give me a 
feadback about the approach by email. 

If we still can not hear from you, I will send you an email alone and fwd this 
mail to Mazin and TSC members.





Scenario


External system to be provisioned


Baseline approach

Reflections Connection to cloud infra

Address and capabilities of VIM managers


(e.g. openstack port)

Mult-VIM: will register infrastructure site/location/region and their 
attributes and capabilities in A, including compute, storage, networking 
(including local and vendor SDN controllers) etc.
VID: manually input the VIM addresses and connection information to the portal, 
and sent this info to MSO which later call controllers which interact with all 
of these systems (VNFMS , VIM , EMS)
VF-C: query VIM addresses from ESR
SO: ?
Connection to transport

SDN controller address’s and capabilities

vendor sdn controler which managed by VIM is not in the scope of ESR. How about 
the vendor sdn controller managed by ONAP SDN-C?



ONAP SDN-C: ?


Connecting to S-VNFM

S-VNFM and capabilites

VF-C: query S-VNFM addresses from ESRCould be part of the tosca/heat   
templateEMS


(Element Management System)

EMS address and capabilitiesAPP-C: ?
Other





@Kenny, Can you set up a one-time session for ESR at 1 PM UTC, Wednesday, 5th 
July.




Thank You for Cooperation,

LiZi













李滋 lizi






IT开发工程师 IT Development Engineer
网管及服务开发二部/中心研究院/系统产品 Network Management & Service Development Dept. II/Central 
R＆D Institute/System Product









成都市高新区天府大道中段800号中兴通讯大厦
ZTE Corporation Building, No. 800 Middle Section Tianfu Avenue, 
Chengdu, P..R.China, 610041 
M: +86 15583405168 
E: li.z...@zte.com.cn 
www.zte.com.cn___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss

[onap-discuss] Zoom ID Notice.  Time: wednesday(9 PM China, 1 PM UTC, 9 AM US/Eastern, 5th July )   ////FW: [onap-tsc] The aproach of interact with External System. PTLs pay attention please 

2017-07-05 Thread li.zi30 
Hi There,




Kenny has already set up a Zoom ID for ESR. The Zoom detail see below. Hope to 
discuss with you.




ESR Meeting
Hi there, 
ONAP Meeting 7 is inviting you to a scheduled Zoom meeting.


Join from PC, Mac, Linux, iOS or Android: https://zoom.us/j/434830725


Or iPhone one-tap (US Toll):  +16465588656,,434830725# or 
+14086380968,,434830725#


Or Telephone:Dial: +1 646 558 8656 (US Toll) or +1 408 638 0968 (US Toll)   
 +1 855 880 1246 (US Toll Free)+1 877 369 0926 (US Toll Free)Meeting 
ID: 434 830 725International numbers available: 
https://zoom.us/zoomconference?m=Va3Jg8p0-BZUnCV0JLW90sn3ozepN21M






Thanks,


LiZi













原始邮件



发件人：李滋00164331
收件人：    
   
赵化冰10201488 
抄送人：  
日 期 ：2017年06月30日 16:02
主 题 ：[onap-tsc][onap-discuss] The aproach of interact with External System. 
PTLs pay attention please






Hi PTLs,




Since each project have a PTL and acording to last TSC meeting, we still need 
feed back from SO/APP-C/ONAP SDN-C team. See detail for the table below.





I will set up a meeting next wednesday(9 PM China, 1 PM UTC, 9 AM US/Eastern, 
5th July ) to discuss about the approach of your project to interact with 
External system. If you can not attend, please call for a proxy or give me a 
feadback about the approach by email. 

If we still can not hear from you, I will send you an email alone and fwd this 
mail to Mazin and TSC members.





Scenario


External system to be provisioned


Baseline approach

Reflections Connection to cloud infra

Address and capabilities of VIM managers


(e.g. openstack port)

Mult-VIM: will register infrastructure site/location/region and their 
attributes and capabilities in A, including compute, storage, networking 
(including local and vendor SDN controllers) etc.
VID: manually input the VIM addresses and connection information to the portal, 
and sent this info to MSO which later call controllers which interact with all 
of these systems (VNFMS , VIM , EMS)
VF-C: query VIM addresses from ESR
SO: ?
Connection to transport

SDN controller address’s and capabilities

vendor sdn controler which managed by VIM is not in the scope of ESR. How about 
the vendor sdn controller managed by ONAP SDN-C?



ONAP SDN-C: ?


Connecting to S-VNFM

S-VNFM and capabilites

VF-C: query S-VNFM addresses from ESRCould be part of the tosca/heat   
templateEMS


(Element Management System)

EMS address and capabilitiesAPP-C: ?
Other





@Kenny, Can you set up a one-time session for ESR at 1 PM UTC, Wednesday, 5th 
July.




Thank You for Cooperation,

LiZi













李滋 lizi






IT开发工程师 IT Development Engineer
网管及服务开发二部/中心研究院/系统产品 Network Management & Service Development Dept. II/Central 
R＆D Institute/System Product









成都市高新区天府大道中段800号中兴通讯大厦
ZTE Corporation Building, No. 800 Middle Section Tianfu Avenue, 
Chengdu, P..R.China, 610041 
M: +86 15583405168 
E: li.z...@zte.com.cn 
www.zte.com.cn___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss

Re: [onap-discuss] [sdc] What is the purpose of on-boarding module in SDC project ?

2017-07-05 Thread Avi Ziv 
Hi Viswa,

SDC is comprised of two applications: OnBoard and Catalog.

OnBoard – you literally onboard the VSP data
Catalog – Create a VF element from this VSP, to be used in the service design

The build POM file for ALL will run the build for the catalog and the 
onboarding,
Onboarding are the following project folders, as defined in the 
onboarding/pom.xml file:

common,
openecomp-be
openecomo-ui

Hope this helps ☺

Bye,

Avi

D@FX


From: Halfon Tal
Sent: Tuesday, July 04, 2017 11:00 PM
To: Avi Ziv 
Subject: FW: [onap-discuss] [sdc] What is the purpose of on-boarding module in 
SDC project ?

Please help


Best regards
Tal Halfon

Development Manager @ Amdocs

P. +972 54 2213763

[cid:image001.png@01D2DC45.AD6F91B0]   [ONAP_logo_Sig]

From: 
onap-discuss-boun...@lists.onap.org 
[mailto:onap-discuss-boun...@lists.onap.org] On Behalf Of Viswa KSP
Sent: Tuesday, July 04, 2017 3:30 PM
To: onap-discuss@lists.onap.org
Subject: [onap-discuss] [sdc] What is the purpose of on-boarding module in SDC 
project ?

Dear All,

READ.ME file of SDC project explains the basic project 
structure as follows:


"SDC is built from several projects, while "sdc-main" contains the main pom.xml 
for all project:
  catalog-be - backend code
 catalog-fe - frontend java code (servlet, proxy)
 catalog-dao - database layer
 catalog-model - data model of the application
 catalog-ui - front end code (javascript, html, css)
 common-app-api - common code for frontend and backend
 common-be - utilities, datatypes and enums
 security-utils - handle encryption/decryption of passwords "

However when I clone SDC code, I see a module named "on-boarding" as well. I 
don't see that linked with build & catalog profile. It is available in default 
"All" maven profile.

Could you somebody explain the purpose of this module?

BR,
Viswa
This message and the information contained herein is proprietary and 
confidential and subject to the Amdocs policy statement,

you may review at https://www.amdocs.com/about/email-disclaimer 

___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss

Re: [onap-discuss] [clamp][holmes] A Sample Rule of Holmes &  a Question on CLAMP

2017-07-05 Thread VENKATESH KUMAR, VIJAY 
Hi Guangrong,
  Just following up to our discussion this morning; the #2 (deployment) is 
identified in the “Service Instantiation flow” on this diagram - 
https://wiki.onap.org/display/DW/DCAE+R1+Release+Planning#DCAER1ReleasePlanning-Architecture
The pre-requisite here is the service blueprint already distributed and made 
available to DCAE (part of design flow).

Thanks,
Vijay

From: onap-discuss-boun...@lists.onap.org 
[mailto:onap-discuss-boun...@lists.onap.org] On Behalf Of NGUEKO, 
GERVAIS-MARTIAL
Sent: Wednesday, July 05, 2017 5:37 AM
To: fu.guangr...@zte.com.cn
Cc: du.jiaqi...@zte.com.cn; onap-discuss@lists.onap.org
Subject: Re: [onap-discuss] [clamp][holmes] A Sample Rule of Holmes &  a 
Question on CLAMP

***Security Advisory: This Message Originated Outside of AT ***
Reference http://cso.att.com/EmailSecurity/IDSP.html for more information.
Hi Guangrong,


1.   In the current CLAMP design the settings of the configuration of 
Micro-service (so in this case Holmes rules) are made in CLAMP and send as 
policies to Policy. Policy then distributes them to the micro-service. Those 
are called in CLAMP configuration policies.
In my previous emails I was talking about policies for policy itself (called in 
CLAMP operational policies) so not the configuration/rulings of micro-services 
which is different. Anyway, this is still under discussion! And at this point 
is just talk, so nothing has been implemented or finalized yet in that 
direction for operational policies (Policy specific rules) used by Policy 
itself!!.

2.   Yes, CLAMP talks to DCAE to trigger the deployment of DCAE 
micro-services.

Br,
Martial

From: fu.guangr...@zte.com.cn 
[mailto:fu.guangr...@zte.com.cn]
Sent: mercredi 5 juillet 2017 03:50
To: 
ngu...@m0049287.ppops.net-00191d01; 
Ngueko, Gervais-Martial >
Cc: onap-discuss@lists.onap.org; 
du.jiaqi...@zte.com.cn; SHACHAM, RON 
>; JI, LUSHENG 
>; DRAGOSH, PAM 
>
Subject: 答复: RE: RE: [clamp][holmes] A Sample Rule of Holmes &  a Question on 
CLAMP


Hi Martial,



Two more questions:



1.  According your previous email, policy rules are designed in CLAMP and 
distributed by SDC. Then which system will be responsible for designing and 
distributing Holmes rules? CLAMP or SDC?

2.  What's the workflow to deploy analytic apps/collectors to DCAE? Will 
CLAMP portal talk with DCAE to deploy them?



Thanks in advnace.



Br,

Guangrong








原始邮件
发件人： >;
收件人：付光荣10144542;
抄送人： 
>;杜家强10071173; 
>; 
>; 
>;
日 期 ：2017年07月04日 20:48
主 题 ：RE: RE: [clamp][holmes] A Sample Rule of Holmes &  a Question on CLAMP


Hi Guangrong,

Yes, you need to ask help from Lusheng.

Concerning the Policy, the direction of the design is to have SDC directly 
distributing policy rules to Policy (instead of CLAMP), but this is still under 
design.

Br,
Martial

From: fu.guangr...@zte.com.cn 
[mailto:fu.guangr...@zte.com.cn]
Sent: mardi 4 juillet 2017 14:37
To: 
ngu...@m0049462.ppops.net-00191d01; 
Ngueko, Gervais-Martial >
Cc: onap-discuss@lists.onap.org; 
du.jiaqi...@zte.com.cn; SHACHAM, RON 
>; JI, LUSHENG 
>; DRAGOSH, PAM 
>
Subject: 答复: RE: [clamp][holmes] A Sample Rule of Holmes &  a Question on CLAMP


Morning Martial,



Do you mean I have to turn to Lusheng for help?



My understanding is that since the template in CLAMP is exactly the same as the 
blueprint in DCAE, if Holmes could translate the template given by CLAMP, there 
will be no problem for it to interpret the blueprint provided by DCAE. 
Therefore, what matters  now is that I need to have a clear idea on how the 
template is mapped into the rule so that I could have a better understanding on 
how the whole stuff works. That's the reason I asked for a sample from both 
CLAMP and Policy.



In a nutshell, I need to know how the rule is defined in the template and then 
converted into the format which could be consumed by the drools engine.



I hope I've made myself clear.



Thanks,



Guangrong










原始邮件
发件人：

[onap-discuss] [clamp][holmes][dcae][policy]CLAMP - Policy - DCAE - HOLMES meeting

2017-07-05 Thread fu.guangrong 
Greetings folks,





It was such a pleasure to have all of you from relevant projects to discuss 
about the deployment solution of Holmes and relevant workflows. Thank you very 
much.




As agreed, we will go on with the dicussion using the timeslot of DCAE weekly 
meeting tomorrow. It'll be great if you could share the documents/materials 
you've shown to us so that we could look them through in advance and perform



a much more efficient meeting tomorrow. 





Attached is the slides on Holmes we have discussed today. If you have any 
questions, please feel free to contact me and I'll respond ASAP.




Thanks and regards,




Guangrong

Solution for Holmes Deployment.pptx
Description: Binary data
___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss

[onap-discuss] SDN-C Code flow Queries

2017-07-05 Thread Arun Arora (c) 
Hi There,



We are trying to understand the SDN-C code flow from its Northbound interface 
to Southbound Controllers which manage the controlled devices.



Following is our understanding till now (build from ONAP Wiki and code reading):

1)  SDN-C is based on ODL framework

2)  ONAP has added SLI which understands the network configuration workflow

3)  The DG builder builds different models (using YANG, XML). These models 
are then converted into SVC Recopies

4)  SLI consumes into SVC Recopies to execute the network configuration 
workflow contained in the recipe

5)  Effectively the workflow is passed to one of he underlying Network 
Adaptors which actually configure the necessary network resources

6)  The update (success/ failure) is sent to MSO and AAI once the request 
is complete



Following are the code modules we know till now:

1)  From MSO mso-sdn-adaptor calls VNFAPIProvider() in SDNCAdpaterRest.java

2)  VNFApiProvider() – receives the request and invokes the 
activate/configure services



Questions:

1) We have seen multiple entry pointers across SDN-C/SLI, dmaplisterner, 
uebClient, admportal and dgbuilder. But the interaction of these with each 
other, VnfAPIProvider()  and southbound interfaces is not clear

2) Post, VnfAPIProvider() how the allocateResourceL3SDN()and later the 
Southbound Adpator APIs are called is not known


While we are trying to understand the code further, if anyone can give some 
pointers or explain the codeflow on a broader level, it would be extremely 
helpful.





Thanks,

Arun Arora

___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss

Re: [onap-discuss] [sdc] Error while using openecomp-ui / webseal simulator

2017-07-05 Thread Lando,Michael 
On the latest code you do not need to run npm install.
It is part of the mvn build flow.
In order to create a valide wars for our application you only need to run mavn 
build


BR,

Michael Lando
Opensource & Frontend Team Lead, SDC
AT Network Application Development · NetCom
Tel Aviv | Tampa | Atlanta | New Jersey |Chicago
···
Office: +972 (3) 5451487
Mobile: +972 (54) 7833603
e-mail: ml6...@intl.att.com


From: Viswa KSP [mailto:kspviswa.git...@gmail.com]
Sent: Wednesday, July 05, 2017 5:05 PM
To: Lando,Michael 
Cc: onap-discuss@lists.onap.org
Subject: Re: [onap-discuss] [sdc] Error while using openecomp-ui / webseal 
simulator

Yup. I did a full build using mvn clean install under sdc-main root.
Then, ran npm install under dox-sequence-diagram-ui, openecomp-u.
Then, rebuilt node-saas module ( hit error on MAC OS ).

And finally changed devConfig.json to point to sdc-be and then hit npm start.

It went on for a while and then hit with above error.

BR,
Viswa

On Wed, Jul 5, 2017 at 7:06 PM, Lando,Michael 
> wrote:
Ok.
You are using mvn clean install from the root dir right?


BR,

Michael Lando
Opensource & Frontend Team Lead, SDC
AT Network Application Development · NetCom
Tel Aviv | Tampa | Atlanta | New Jersey |Chicago
···
Office: +972 (3) 5451487
Mobile: +972 (54) 7833603
e-mail: 
ml6...@intl.att.com>


From: Viswa KSP 
[mailto:kspviswa.git...@gmail.com]
Sent: Wednesday, July 05, 2017 4:36 PM
To: Lando,Michael >
Cc: onap-discuss@lists.onap.org
Subject: Re: [onap-discuss] [sdc] Error while using openecomp-ui / webseal 
simulator

Hi Michael,

It is on master and I'm on direct internet connection.

BR,
Viswa

On Wed, Jul 5, 2017 at 6:46 PM, Lando,Michael 
>>
 wrote:
Hi,
What branch are you working from?
Are you behind a proxy when you are compiling?


BR,

Michael Lando
Opensource & Frontend Team Lead, SDC
AT Network Application Development · NetCom
Tel Aviv | Tampa | Atlanta | New Jersey |Chicago
···
Office: +972 (3) 5451487
Mobile: +972 (54) 7833603
e-mail: 
ml6...@intl.att.com>>>


From: 
onap-discuss-boun...@lists.onap.org>
 
[mailto:onap-discuss-boun...@lists.onap.org>]
 On Behalf Of Viswa KSP
Sent: Wednesday, July 05, 2017 3:43 PM
To: 
onap-discuss@lists.onap.org>
Subject: [onap-discuss] [sdc] Error while using openecomp-ui / webseal simulator

Dear All,

I tried to stand-up SDC in standalone mode as per 
READ.ME
 in openecomp-ui dir and currently stuck with below error:


ERROR in ./~/dox-sequence-diagram-ui/dist/index.js

Module not found: Error: Can't resolve 'd3' in 
'/Users/kspviswa-vz/ws/onap/sdc/openecomp-ui/node_modules/dox-sequence-diagram-ui/dist'

 @ ./~/dox-sequence-diagram-ui/dist/index.js 3:45-58

 @ ./src/sdc-app/flows/SequenceDiagram.jsx

 @ ./src/sdc-app/flows/FlowsListEditorView.jsx

 @ ./src/sdc-app/flows/FlowsListEditor.js

 @ ./src/sdc-app/flows/FlowsPunchOut.jsx

 @ ./src/sdc-app/punch-outs.js

 @ multi

Re: [onap-discuss] [sdc] Error while using openecomp-ui / webseal simulator

2017-07-05 Thread Viswa KSP 
Yup. I did a full build using mvn clean install under sdc-main root.
Then, ran npm install under *dox-sequence-diagram-ui, **openecomp-u.*
Then, rebuilt node-saas module ( hit error on MAC OS ).

And finally changed devConfig.json to point to sdc-be and then hit npm
start.

It went on for a while and then hit with above error.

BR,
Viswa

On Wed, Jul 5, 2017 at 7:06 PM, Lando,Michael  wrote:

> Ok.
> You are using mvn clean install from the root dir right?
>
>
> BR,
>
> Michael Lando
> Opensource & Frontend Team Lead, SDC
> AT Network Application Development · NetCom
> Tel Aviv | Tampa | Atlanta | New Jersey |Chicago
> 
> ···
> Office: +972 (3) 5451487
> Mobile: +972 (54) 7833603
> e-mail: ml6...@intl.att.com
>
>
> From: Viswa KSP [mailto:kspviswa.git...@gmail.com]
> Sent: Wednesday, July 05, 2017 4:36 PM
> To: Lando,Michael 
> Cc: onap-discuss@lists.onap.org
> Subject: Re: [onap-discuss] [sdc] Error while using openecomp-ui / webseal
> simulator
>
> Hi Michael,
>
> It is on master and I'm on direct internet connection.
>
> BR,
> Viswa
>
> On Wed, Jul 5, 2017 at 6:46 PM, Lando,Michael > wrote:
> Hi,
> What branch are you working from?
> Are you behind a proxy when you are compiling?
>
>
> BR,
>
> Michael Lando
> Opensource & Frontend Team Lead, SDC
> AT Network Application Development · NetCom
> Tel Aviv | Tampa | Atlanta | New Jersey |Chicago
> 
> ···
> Office: +972 (3) 5451487
> Mobile: +972 (54) 7833603
> e-mail: ml6...@intl.att.com r...@intl.att.com>
>
>
> From: onap-discuss-boun...@lists.onap.org boun...@lists.onap.org> [mailto:onap-discuss-boun...@lists.onap.org
> ] On Behalf Of Viswa KSP
> Sent: Wednesday, July 05, 2017 3:43 PM
> To: onap-discuss@lists.onap.org
> Subject: [onap-discuss] [sdc] Error while using openecomp-ui / webseal
> simulator
>
> Dear All,
>
> I tried to stand-up SDC in standalone mode as per READ.ME<
> https://urldefense.proofpoint.com/v2/url?u=http-
> 3A__READ.ME=DwMFaQ=LFYZ-o9_HUMeMTSQicvjIg=
> FYvXSElfSmWIXOeZxWIxQysejuz9-TXmaL6uftBh8MY=
> J6348ySRE3qIraTk21je16V7zjAt6ulphKab_P_UsC0=
> cqpgZid0i68XrQQSGRClI8sLD6WP_FE79zh0U1d92NY=> urldefense.proofpoint.com/v2/url?u=http-3A__READ.ME=DwMFaQ=LFYZ-o9_
> HUMeMTSQicvjIg=FYvXSElfSmWIXOeZxWIxQysejuz9-TXmaL6uftBh8MY=1_
> ppYbu4ywRMXDT7H6lIKL_VJG4QMEePhL5GVIIt7aY=xq7AYzKDiGEonTBCX2XdwBfNcdpihh
> 2Ybq2CwhfRxiY=> in openecomp-ui dir and currently stuck with below
> error:
>
>
> ERROR in ./~/dox-sequence-diagram-ui/dist/index.js
>
> Module not found: Error: Can't resolve 'd3' in '/Users/kspviswa-vz/ws/onap/
> sdc/openecomp-ui/node_modules/dox-sequence-diagram-ui/dist'
>
>  @ ./~/dox-sequence-diagram-ui/dist/index.js 3:45-58
>
>  @ ./src/sdc-app/flows/SequenceDiagram.jsx
>
>  @ ./src/sdc-app/flows/FlowsListEditorView.jsx
>
>  @ ./src/sdc-app/flows/FlowsListEditor.js
>
>  @ ./src/sdc-app/flows/FlowsPunchOut.jsx
>
>  @ ./src/sdc-app/punch-outs.js
>
>  @ multi (webpack)-dev-server/client?http://localhost:9000 urldefense.proofpoint.com/v2/url?u=http-3A__localhost-
> 3A9000=DwMFaQ=LFYZ-o9_HUMeMTSQicvjIg=FYvXSElfSmWIXOeZxWIxQysejuz9-
> TXmaL6uftBh8MY=J6348ySRE3qIraTk21je16V7zjAt6ulphKab_P_UsC0=
> ttihg5AVFClWIi3S5owJkDK5R0XSlCyYuhDJlDL58bI=> urldefense.proofpoint.com/v2/url?u=http-3A__localhost-
> 3A9000=DwMFaQ=LFYZ-o9_HUMeMTSQicvjIg=FYvXSElfSmWIXOeZxWIxQysejuz9-
> TXmaL6uftBh8MY=1_ppYbu4ywRMXDT7H6lIKL_VJG4QMEePhL5GVIIt7aY=
> lBjrTaQrePN2fpoDduIdd8znXBnTvfYzsZd7Gti5Gro=> webpack/hot/dev-server
> sdc-app/punch-outs.js webpack-dev-server/client?http://localhost:9000<
> https://urldefense.proofpoint.com/v2/url?u=http-3A__localhost-
> 3A9000=DwMFaQ=LFYZ-o9_HUMeMTSQicvjIg=FYvXSElfSmWIXOeZxWIxQysejuz9-
> TXmaL6uftBh8MY=J6348ySRE3qIraTk21je16V7zjAt6ulphKab_P_UsC0=
> ttihg5AVFClWIi3S5owJkDK5R0XSlCyYuhDJlDL58bI=> urldefense.proofpoint.com/v2/url?u=http-3A__localhost-
> 3A9000=DwMFaQ=LFYZ-o9_HUMeMTSQicvjIg=FYvXSElfSmWIXOeZxWIxQysejuz9-
> TXmaL6uftBh8MY=1_ppYbu4ywRMXDT7H6lIKL_VJG4QMEePhL5GVIIt7aY=
> lBjrTaQrePN2fpoDduIdd8znXBnTvfYzsZd7Gti5Gro=>
> webpack/hot/only-dev-server
>
>
>
> ERROR in ./~/dox-sequence-diagram-ui/dist/index.js
>
> Module not found: Error: Can't resolve 'react-dnd-html5-backend' in
> '/Users/kspviswa-vz/ws/onap/sdc/openecomp-ui/node_modules/
> dox-sequence-diagram-ui/dist'
>
>  @ ./~/dox-sequence-diagram-ui/dist/index.js 3:60-94
>
>  @ ./src/sdc-app/flows/SequenceDiagram.jsx
>
>  @ ./src/sdc-app/flows/FlowsListEditorView.jsx
>
>  @ ./src/sdc-app/flows/FlowsListEditor.js
>
>  @ ./src/sdc-app/flows/FlowsPunchOut.jsx
>
>  @ ./src/sdc-app/punch-outs.js
>
>  @ multi

Re: [onap-discuss] [SDC] Need your help to deploy SDC

2017-07-05 Thread Lando,Michael 
Moti can you assit.


BR,

Michael Lando
Opensource & Frontend Team Lead, SDC
AT Network Application Development * NetCom
Tel Aviv | Tampa | Atlanta | New Jersey |Chicago
***
Office: +972 (3) 5451487
Mobile: +972 (54) 7833603
e-mail: ml6...@intl.att.com


From: onap-discuss-boun...@lists.onap.org 
[mailto:onap-discuss-boun...@lists.onap.org] On Behalf Of Chen, Wei D
Sent: Saturday, July 01, 2017 11:00 AM
To: onap-discuss@lists.onap.org
Subject: [onap-discuss] [SDC] Need your help to deploy SDC

Hi All,

I am trying to enable SDC in the demo one is from Cassandra, seen fro project, 
the ONAP is on top of vanilla OpenStack, just want to have a try on how it 
works from portal, but I got bunches of issues and the latest m the log it 
seems like 9042 port is not available (log is attached), so I go to the 
container and run /root/startup.sh manually, firstly, I can access the DB, but 
some mins later I cannot access the DB anymore,

This is what I get from the DB couple of mins after run startup.sh.

# cqlsh -u cassandra -p Aa1234%^! 10.0.3.1



Namespaces:

cassandra@cqlsh> DESCRIBE keyspaces;



system_auth   titan   sdcaudit  sdcartifact

sdccomponent  system  dox   system_traces


I check both 9160 and 9042 inside container, seems like they are opened,
root@5aad37f3ec48:/var/log/cassandra# netstat -anp | grep 9042
tcp6   0  0 0.0.0.0:9042:::*LISTEN  
-
root@5aad37f3ec48:/var/log/cassandra# netstat -anp | grep 9160
tcp0  0 0.0.0.0:91600.0.0.0:*   LISTEN  
-


But when I try to connect to the DB again, I see,
root@5aad37f3ec48:/var/log/cassandra# cqlsh -u cassandra -p Aa1234%^! 10.0.3.1
Connection error: ('Unable to connect to any servers', {'10.0.3.1': 
OperationTimedOut('errors=None, last_host=None',)})

Also, I saw those message from console,
Fri Jun 30 01:39:52 UTC 2017 --- cqlsh is NOT enabled to connect yet. sleep 5

Looks like those info comes from /tmp/create_cassandra_user.sh.

Any ideas on how to fix it?

Best Regards,
Dave Chen
___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss

[onap-discuss] [SDC] Kickoff meeting

2017-07-05 Thread meng.zhaoxing1 
Hi Michael,




Before the weekly meeting is set up, I suggest that we could have a kickoff 
meeting to discuss the release planning before this Friday's M1 review.




Thanks,

Zhaoxing___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss

Re: [onap-discuss] [sdc] Error while using openecomp-ui / webseal simulator

2017-07-05 Thread Lando,Michael 
Ok.
You are using mvn clean install from the root dir right?


BR,

Michael Lando
Opensource & Frontend Team Lead, SDC
AT Network Application Development · NetCom
Tel Aviv | Tampa | Atlanta | New Jersey |Chicago
···
Office: +972 (3) 5451487
Mobile: +972 (54) 7833603
e-mail: ml6...@intl.att.com


From: Viswa KSP [mailto:kspviswa.git...@gmail.com]
Sent: Wednesday, July 05, 2017 4:36 PM
To: Lando,Michael 
Cc: onap-discuss@lists.onap.org
Subject: Re: [onap-discuss] [sdc] Error while using openecomp-ui / webseal 
simulator

Hi Michael,

It is on master and I'm on direct internet connection.

BR,
Viswa

On Wed, Jul 5, 2017 at 6:46 PM, Lando,Michael 
> wrote:
Hi,
What branch are you working from?
Are you behind a proxy when you are compiling?


BR,

Michael Lando
Opensource & Frontend Team Lead, SDC
AT Network Application Development · NetCom
Tel Aviv | Tampa | Atlanta | New Jersey |Chicago
···
Office: +972 (3) 5451487
Mobile: +972 (54) 7833603
e-mail: 
ml6...@intl.att.com>


From: 
onap-discuss-boun...@lists.onap.org 
[mailto:onap-discuss-boun...@lists.onap.org]
 On Behalf Of Viswa KSP
Sent: Wednesday, July 05, 2017 3:43 PM
To: onap-discuss@lists.onap.org
Subject: [onap-discuss] [sdc] Error while using openecomp-ui / webseal simulator

Dear All,

I tried to stand-up SDC in standalone mode as per 
READ.ME
 in openecomp-ui dir and currently stuck with below error:


ERROR in ./~/dox-sequence-diagram-ui/dist/index.js

Module not found: Error: Can't resolve 'd3' in 
'/Users/kspviswa-vz/ws/onap/sdc/openecomp-ui/node_modules/dox-sequence-diagram-ui/dist'

 @ ./~/dox-sequence-diagram-ui/dist/index.js 3:45-58

 @ ./src/sdc-app/flows/SequenceDiagram.jsx

 @ ./src/sdc-app/flows/FlowsListEditorView.jsx

 @ ./src/sdc-app/flows/FlowsListEditor.js

 @ ./src/sdc-app/flows/FlowsPunchOut.jsx

 @ ./src/sdc-app/punch-outs.js

 @ multi 
(webpack)-dev-server/client?http://localhost:9000
 webpack/hot/dev-server sdc-app/punch-outs.js 
webpack-dev-server/client?http://localhost:9000
 webpack/hot/only-dev-server



ERROR in ./~/dox-sequence-diagram-ui/dist/index.js

Module not found: Error: Can't resolve 'react-dnd-html5-backend' in 
'/Users/kspviswa-vz/ws/onap/sdc/openecomp-ui/node_modules/dox-sequence-diagram-ui/dist'

 @ ./~/dox-sequence-diagram-ui/dist/index.js 3:60-94

 @ ./src/sdc-app/flows/SequenceDiagram.jsx

 @ ./src/sdc-app/flows/FlowsListEditorView.jsx

 @ ./src/sdc-app/flows/FlowsListEditor.js

 @ ./src/sdc-app/flows/FlowsPunchOut.jsx

 @ ./src/sdc-app/punch-outs.js

 @ multi 
(webpack)-dev-server/client?http://localhost:9000
 webpack/hot/dev-server sdc-app/punch-outs.js

Re: [onap-discuss] [sdc] Error while using openecomp-ui / webseal simulator

2017-07-05 Thread Viswa KSP 
Hi Michael,

It is on master and I'm on direct internet connection.

BR,
Viswa

On Wed, Jul 5, 2017 at 6:46 PM, Lando,Michael  wrote:

> Hi,
> What branch are you working from?
> Are you behind a proxy when you are compiling?
>
>
> BR,
>
> Michael Lando
> Opensource & Frontend Team Lead, SDC
> AT Network Application Development · NetCom
> Tel Aviv | Tampa | Atlanta | New Jersey |Chicago
> 
> ···
> Office: +972 (3) 5451487
> Mobile: +972 (54) 7833603
> e-mail: ml6...@intl.att.com
>
>
> From: onap-discuss-boun...@lists.onap.org [mailto:onap-discuss-bounces@
> lists.onap.org] On Behalf Of Viswa KSP
> Sent: Wednesday, July 05, 2017 3:43 PM
> To: onap-discuss@lists.onap.org
> Subject: [onap-discuss] [sdc] Error while using openecomp-ui / webseal
> simulator
>
> Dear All,
>
> I tried to stand-up SDC in standalone mode as per READ.ME<
> https://urldefense.proofpoint.com/v2/url?u=http-
> 3A__READ.ME=DwMFaQ=LFYZ-o9_HUMeMTSQicvjIg=
> FYvXSElfSmWIXOeZxWIxQysejuz9-TXmaL6uftBh8MY=1_ppYbu4ywRMXDT7H6lIKL_
> VJG4QMEePhL5GVIIt7aY=xq7AYzKDiGEonTBCX2XdwBfNcdpihh2Ybq2CwhfRxiY=> in
> openecomp-ui dir and currently stuck with below error:
>
>
> ERROR in ./~/dox-sequence-diagram-ui/dist/index.js
>
> Module not found: Error: Can't resolve 'd3' in '/Users/kspviswa-vz/ws/onap/
> sdc/openecomp-ui/node_modules/dox-sequence-diagram-ui/dist'
>
>  @ ./~/dox-sequence-diagram-ui/dist/index.js 3:45-58
>
>  @ ./src/sdc-app/flows/SequenceDiagram.jsx
>
>  @ ./src/sdc-app/flows/FlowsListEditorView.jsx
>
>  @ ./src/sdc-app/flows/FlowsListEditor.js
>
>  @ ./src/sdc-app/flows/FlowsPunchOut.jsx
>
>  @ ./src/sdc-app/punch-outs.js
>
>  @ multi (webpack)-dev-server/client?http://localhost:9000 urldefense.proofpoint.com/v2/url?u=http-3A__localhost-
> 3A9000=DwMFaQ=LFYZ-o9_HUMeMTSQicvjIg=FYvXSElfSmWIXOeZxWIxQysejuz9-
> TXmaL6uftBh8MY=1_ppYbu4ywRMXDT7H6lIKL_VJG4QMEePhL5GVIIt7aY=
> lBjrTaQrePN2fpoDduIdd8znXBnTvfYzsZd7Gti5Gro=> webpack/hot/dev-server
> sdc-app/punch-outs.js webpack-dev-server/client?http://localhost:9000<
> https://urldefense.proofpoint.com/v2/url?u=http-3A__localhost-
> 3A9000=DwMFaQ=LFYZ-o9_HUMeMTSQicvjIg=FYvXSElfSmWIXOeZxWIxQysejuz9-
> TXmaL6uftBh8MY=1_ppYbu4ywRMXDT7H6lIKL_VJG4QMEePhL5GVIIt7aY=
> lBjrTaQrePN2fpoDduIdd8znXBnTvfYzsZd7Gti5Gro=>
> webpack/hot/only-dev-server
>
>
>
> ERROR in ./~/dox-sequence-diagram-ui/dist/index.js
>
> Module not found: Error: Can't resolve 'react-dnd-html5-backend' in
> '/Users/kspviswa-vz/ws/onap/sdc/openecomp-ui/node_modules/
> dox-sequence-diagram-ui/dist'
>
>  @ ./~/dox-sequence-diagram-ui/dist/index.js 3:60-94
>
>  @ ./src/sdc-app/flows/SequenceDiagram.jsx
>
>  @ ./src/sdc-app/flows/FlowsListEditorView.jsx
>
>  @ ./src/sdc-app/flows/FlowsListEditor.js
>
>  @ ./src/sdc-app/flows/FlowsPunchOut.jsx
>
>  @ ./src/sdc-app/punch-outs.js
>
>  @ multi (webpack)-dev-server/client?http://localhost:9000 urldefense.proofpoint.com/v2/url?u=http-3A__localhost-
> 3A9000=DwMFaQ=LFYZ-o9_HUMeMTSQicvjIg=FYvXSElfSmWIXOeZxWIxQysejuz9-
> TXmaL6uftBh8MY=1_ppYbu4ywRMXDT7H6lIKL_VJG4QMEePhL5GVIIt7aY=
> lBjrTaQrePN2fpoDduIdd8znXBnTvfYzsZd7Gti5Gro=> webpack/hot/dev-server
> sdc-app/punch-outs.js webpack-dev-server/client?http://localhost:9000<
> https://urldefense.proofpoint.com/v2/url?u=http-3A__localhost-
> 3A9000=DwMFaQ=LFYZ-o9_HUMeMTSQicvjIg=FYvXSElfSmWIXOeZxWIxQysejuz9-
> TXmaL6uftBh8MY=1_ppYbu4ywRMXDT7H6lIKL_VJG4QMEePhL5GVIIt7aY=
> lBjrTaQrePN2fpoDduIdd8znXBnTvfYzsZd7Gti5Gro=>
> webpack/hot/only-dev-server
>
>
>
> ERROR in ./~/dox-sequence-diagram-ui/dist/index.js
>
> Module not found: Error: Can't resolve 'react-dnd' in
> '/Users/kspviswa-vz/ws/onap/sdc/openecomp-ui/node_modules/
> dox-sequence-diagram-ui/dist'
>
>  @ ./~/dox-sequence-diagram-ui/dist/index.js 3:96-116
>
>  @ ./src/sdc-app/flows/SequenceDiagram.jsx
>
>  @ ./src/sdc-app/flows/FlowsListEditorView.jsx
>
>  @ ./src/sdc-app/flows/FlowsListEditor.js
>
>  @ ./src/sdc-app/flows/FlowsPunchOut.jsx
>
>  @ ./src/sdc-app/punch-outs.js
>
>  @ multi (webpack)-dev-server/client?http://localhost:9000 urldefense.proofpoint.com/v2/url?u=http-3A__localhost-
> 3A9000=DwMFaQ=LFYZ-o9_HUMeMTSQicvjIg=FYvXSElfSmWIXOeZxWIxQysejuz9-
> TXmaL6uftBh8MY=1_ppYbu4ywRMXDT7H6lIKL_VJG4QMEePhL5GVIIt7aY=
> lBjrTaQrePN2fpoDduIdd8znXBnTvfYzsZd7Gti5Gro=> webpack/hot/dev-server
> sdc-app/punch-outs.js webpack-dev-server/client?http://localhost:9000<
> https://urldefense.proofpoint.com/v2/url?u=http-3A__localhost-
> 3A9000=DwMFaQ=LFYZ-o9_HUMeMTSQicvjIg=FYvXSElfSmWIXOeZxWIxQysejuz9-
> TXmaL6uftBh8MY=1_ppYbu4ywRMXDT7H6lIKL_VJG4QMEePhL5GVIIt7aY=
> lBjrTaQrePN2fpoDduIdd8znXBnTvfYzsZd7Gti5Gro=>
> webpack/hot/only-dev-server
>
> Any help on this is highly appreciated.
>
> BR,
> Viswa
>
___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss

Re: [onap-discuss] [sdc] Help for compiling SDC module

2017-07-05 Thread Lando,Michael 
Hi,
What branch are you cloning from?
Are you behind a corporate proxy when you are building?


BR,

Michael Lando
Opensource & Frontend Team Lead, SDC
AT Network Application Development · NetCom
Tel Aviv | Tampa | Atlanta | New Jersey |Chicago
···
Office: +972 (3) 5451487
Mobile: +972 (54) 7833603
e-mail: ml6...@intl.att.com


From: onap-discuss-boun...@lists.onap.org 
[mailto:onap-discuss-boun...@lists.onap.org] On Behalf Of Morales, Victor
Sent: Monday, July 03, 2017 7:13 PM
To: onap-discuss@lists.onap.org
Subject: [onap-discuss] [sdc] Help for compiling SDC module

Hey there,

I’m trying to compile the SDC repo[1] with the command `mvn clean install 
-DskipTests=true -Dmaven.test.skip=true -Dadditionalparam=-Xdoclint:none` but 
I’m getting the following error:

==> sdc: [ERROR] npm ERR! code ENOENT
==> sdc: [ERROR] npm ERR! errno -2
==> sdc: [ERROR] npm ERR! syscall chmod
==> sdc: [ERROR]
==> sdc: [ERROR] npm ERR! enoent ENOENT: no such file or directory, chmod 
'/opt/sdc/openecomp-ui/node_modules/coffee-script/bin/coffee'
==> sdc: [ERROR] npm ERR! enoent ENOENT: no such file or directory, chmod 
'/opt/sdc/openecomp-ui/node_modules/coffee-script/bin/coffee'
==> sdc: [ERROR] npm ERR! enoent This is most likely not a problem with npm 
itself
==> sdc: [ERROR] npm ERR! enoent and is related to npm not being able to find a 
file.
==> sdc: [ERROR] npm ERR! enoent
==> sdc: [ERROR]
==> sdc: [ERROR] npm ERR! Please include the following file with any support 
request:
==> sdc: [ERROR] npm ERR! /opt/sdc/openecomp-ui/npm-debug.log

During the compilation of onboarding-ui-war module, I tried updating the 
node.js and npm versions and adding some dependencies(like coffe, istambul and 
others) without any success.  I just wondering if there is a missing step or 
dependency for that compilation.

Thanks
Victor Morales
irc: electrocucaracha

[1] https://git.onap.org/sdc/
___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss

Re: [onap-discuss] [vid][portal] Robot VM Demo.sh is failingtoinitializecustomer

2017-07-05 Thread Lando,Michael 
Amichai please assit.

BR,

Michael Lando
Opensource & Frontend Team Lead, SDC
AT Network Application Development · NetCom
Tel Aviv | Tampa | Atlanta | New Jersey |Chicago
···
Office: +972 (3) 5451487
Mobile: +972 (54) 7833603
e-mail: ml6...@intl.att.com


From: onap-discuss-boun...@lists.onap.org 
[mailto:onap-discuss-boun...@lists.onap.org] On Behalf Of Kanagaraj Manickam
Sent: Tuesday, July 04, 2017 12:36 PM
To: Josef Reisinger ; Subhash Kumar Singh 

Cc: onap-discuss@lists.onap.org
Subject: Re: [onap-discuss] [vid][portal] Robot VM Demo.sh is 
failingtoinitializecustomer

As subash mentioned in earlier mail, we ran below command first and ROBOT test 
cases passed successfully.
# demo.sh init_customer

To double check, we have verified from A and the customer named 
‘Demonstration’ was created properly.
Then we ran the command
# demo.sh init
At this time, test cases was failed with report, saying HTTP status code should 
be 201, but it was giving 200.
As we have already created the customer with init_customer command, we have 
updated the test case to consider
Status code 200 and proceed further, which helped us to run the init command 
successfully. At this point, VID shown up both vFW and vLB got listed.

Now when we try to deploy vFW, VID is not listing any subscriber  though 
init_customer is passed and A reported them properly.
So, Could someone from VID portal team, kindly help here to fix the issue ?

Regards
Kanagaraj M

***
本邮件及其附件含有华为公司的保密信息，仅限于发送给上面地址中列出的个人或群组。禁止任何其他人以任何形式使用（包括但不限于全部或部分地泄露、复制、或散发）本邮件中的信息。如果您错收了本邮件，请您立即电话或邮件通知发件人并删除本邮件！**

***
This e-mail and its attachments contain confidential information from HUAWEI, 
which is intended only for the person  or entity whose address is listed above. 
Any use of the information contained herein in any way (including, but not   
limited to, total or partial disclosure, reproduction, or dissemination) by 
persons other than the intended recipient(s) is  prohibited. If you receive 
this e-mail in error, please notify the sender by phone or email immediately 
and delete it!
***

From: 
onap-discuss-boun...@lists.onap.org 
[mailto:onap-discuss-boun...@lists.onap.org] On Behalf Of Josef Reisinger
Sent: Wednesday, June 28, 2017 10:59 PM
To: Subhash Kumar Singh
Cc: onap-discuss@lists.onap.org
Subject: Re: [onap-discuss] Robot VM Demo.sh is failingtoinitializecustomer

Subhash,

I had the same observation with new "new" HEAT template which uses 2 AAI VMs. 
reverting back to the previous HEAT template (with one VM for AAI) has solved 
this issue for me.
Btw, running demo.sh init second time creates an error (I believe this is also 
discussed in this mailing list in the last week or the week before the last)

Mit freundlichen Grüßen / Kind regards
Josef Reisinger



From:"Michael O'Brien" 
>
To:Subhash Kumar Singh 
>, 
"Gaurav Gupta (c)" >, 
"ROSE, DANIEL V" >, 
"onap-discuss@lists.onap.org" 
>
Date:28.06.2017 17:26
Subject:Re: [onap-discuss] Robot VM Demo.sh is failingto
initializecustomer
Sent by:
onap-discuss-boun...@lists.onap.org




Subhash,
  HI, just an observation – you may want to run demo.sh init (as it runs both 
./demo.sh init_customer and ./demo.sh distribute) – you may be missing the 
models.
  See the recommended demo call here
https://wiki.onap.org/display/DW/Tutorial%3A+Creating+a+Service+Instance+from+a+Design+Model#Tutorial:CreatingaServiceInstancefromaDesignModel-RunRobotdemo.shinit

   /michael

From: 
onap-discuss-boun...@lists.onap.org 
[mailto:onap-discuss-boun...@lists.onap.org] On

Re: [onap-discuss] [sdc] What is the purpose of on-boarding module in SDC project ?

2017-07-05 Thread Lando,Michael 
Hi,
We need to update our readme file.
The sdc project has two parts
One is called onboarding and one is the catalog.
The onboarding is responsible for the conversion from heat into tosca.
This tosca is imported and enchased using the catalog part and then distributed.


BR,

Michael Lando
Opensource & Frontend Team Lead, SDC
AT Network Application Development · NetCom
Tel Aviv | Tampa | Atlanta | New Jersey |Chicago
···
Office: +972 (3) 5451487
Mobile: +972 (54) 7833603
e-mail: ml6...@intl.att.com


From: onap-discuss-boun...@lists.onap.org 
[mailto:onap-discuss-boun...@lists.onap.org] On Behalf Of Viswa KSP
Sent: Tuesday, July 04, 2017 3:30 PM
To: onap-discuss@lists.onap.org
Subject: [onap-discuss] [sdc] What is the purpose of on-boarding module in SDC 
project ?

Dear All,

READ.ME
 file of SDC project explains the basic project structure as follows:


"SDC is built from several projects, while "sdc-main" contains the main pom.xml 
for all project:
  catalog-be - backend code
 catalog-fe - frontend java code (servlet, proxy)
 catalog-dao - database layer
 catalog-model - data model of the application
 catalog-ui - front end code (javascript, html, css)
 common-app-api - common code for frontend and backend
 common-be - utilities, datatypes and enums
 security-utils - handle encryption/decryption of passwords "

However when I clone SDC code, I see a module named "on-boarding" as well. I 
don't see that linked with build & catalog profile. It is available in default 
"All" maven profile.

Could you somebody explain the purpose of this module?

BR,
Viswa
___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss

[onap-discuss] [sdnc] SDNC weekly meeting schedule (Weds 1300 UTC starting 7/12)

2017-07-05 Thread TIMONEY, DAN 
All,

Our SDNC project team meetings will be Wednesdays at 9 AM EDT (1 PM UTC), 
starting next Wednesday, 7/12 (sorry, didn’t get this out in time for today).


The Zoom meeting logistics are below.

Thanks!
Dan


ONAP Meeting 6 is inviting you to a scheduled Zoom meeting.

Join from PC, Mac, Linux, iOS or Android: 
https://zoom.us/j/330824945

Or iPhone one-tap (US Toll):  +16465588656,,330824945# or 
+14086380968,,330824945#

Or Telephone:
Dial: +1 646 558 8656 (US Toll) or +1 408 638 0968 (US Toll)
+1 855 880 1246 (US Toll Free)
+1 877 369 0926 (US Toll Free)
Meeting ID: 330 824 945
International numbers available: 
https://zoom.us/zoomconference?m=rRItS256rDo_7UtkIznpz4jzZNmjTfbO



Dan Timoney
Principal Technical Staff Member
AT
Email : dtimo...@att.com
Office : +1 (732) 420-3226
Mobile : +1 (201) 960-1211
200 S Laurel Ave, Rm E2-2A03
Middletown, NJ 08873
BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//Microsoft Corporation//Outlook for Mac MIMEDIR//EN
METHOD:PUBLISH
BEGIN:VTIMEZONE
TZID:Eastern Time (US & Canada)
X-ENTOURAGE-CFTIMEZONE:US/Eastern
X-ENTOURAGE-TZID:4
BEGIN:STANDARD
RRULE:FREQ=YEARLY;INTERVAL=1;BYSECOND=0;BYMINUTE=0;BYHOUR=2;BYDAY=1SU;BYMO
 NTH=11
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
DTSTART:20071104T02
END:STANDARD
BEGIN:DAYLIGHT
RRULE:FREQ=YEARLY;INTERVAL=1;BYSECOND=0;BYMINUTE=0;BYHOUR=2;BYDAY=2SU;BYMO
 NTH=3
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
DTSTART:20070311T02
END:DAYLIGHT
END:VTIMEZONE
BEGIN:VEVENT
UID:FA0D73F0-6408-4E0B-B374-5E162E063BC0
X-ENTOURAGE_UUID:FA0D73F0-6408-4E0B-B374-5E162E063BC0
X-MICROSOFT-EXCHANGE-ID:AAMkADU1ZGY4MjJhLTI3MTAtNDg0Zi1iN2RjLTNhYTFlZmQyNz
 YwYQBGAACjAe2E95vREb2qAADAeZ39BwAwCUB6OVXREb2kAADAeZ39FouQAAAx2Sr+
 2LhnQ5u5ZAR43vTGAAAmepB1AAA=
X-MICROSOFT-EXCHANGE-CHANGEKEY:DwAAABYx2Sr+2LhnQ5u5ZAR43vTGAAAmfVCV
DTSTAMP:20170705T131225Z
DTSTART;TZID="Eastern Time (US & Canada)":20170712T09
DTEND;TZID="Eastern Time (US & Canada)":20170712T093000
LAST-MODIFIED:20170705T131227Z
SUMMARY:[sdnc] Weekly SDNC project team meeting
DESCRIPTION:ONAP Meeting 6 is inviting you to a scheduled Zoom meeting.
  \n\n\n\nJoin from PC\, Mac\, Linux\, iOS or Android:
  https://zoom.us/j/330824945\n\n\n\nOr iPhone one-tap (US Toll):
   +16465588656\,\,330824945# or +14086380968\,\,330824945#\n\n\n\nOr
  Telephone:\n\nDial: +1 646 558 8656 (US Toll) or +1 408 638 0968 (US
  Toll)\n\n+1 855 880 1246 (US Toll Free)\n\n+1 877 369 0926 (US
  Toll Free)\n\nMeeting ID: 330 824 945\n\nInternational numbers
  available:
  https://zoom.us/zoomconference?m=rRItS256rDo_7UtkIznpz4jzZNmjTfbO\n\n\n
LOCATION:Zoom meeting - see notes for logistics
ORGANIZER:MAILTO:dt5...@att.com
SEQUENCE:0
ATTENDEE;ROLE=REQ-PARTICIPANT;RSVP=FALSE;PARTSTAT=NEEDS-ACTION:MAILTO:onap
 -disc...@lists.onap.org
X-MICROSOFT-CDO-BUSYSTATUS:BUSY
X-MICROSOFT-CDO-ALLDAYEVENT:FALSE
X-MICROSOFT-DISALLOW-COUNTER:TRUE
X-MICROSOFT-CDO-INSTTYPE:0
BEGIN:VALARM
ACTION:DISPLAY
DESCRIPTION:REMINDER
TRIGGER;RELATED=START:-PT00H15M00S
END:VALARM
END:VEVENT
END:VCALENDAR
___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss

Re: [onap-discuss] [sdc] Error while using openecomp-ui / webseal simulator

2017-07-05 Thread Lando,Michael 
Hi,
What branch are you working from?
Are you behind a proxy when you are compiling?


BR,

Michael Lando
Opensource & Frontend Team Lead, SDC
AT Network Application Development · NetCom
Tel Aviv | Tampa | Atlanta | New Jersey |Chicago
···
Office: +972 (3) 5451487
Mobile: +972 (54) 7833603
e-mail: ml6...@intl.att.com


From: onap-discuss-boun...@lists.onap.org 
[mailto:onap-discuss-boun...@lists.onap.org] On Behalf Of Viswa KSP
Sent: Wednesday, July 05, 2017 3:43 PM
To: onap-discuss@lists.onap.org
Subject: [onap-discuss] [sdc] Error while using openecomp-ui / webseal simulator

Dear All,

I tried to stand-up SDC in standalone mode as per 
READ.ME
 in openecomp-ui dir and currently stuck with below error:


ERROR in ./~/dox-sequence-diagram-ui/dist/index.js

Module not found: Error: Can't resolve 'd3' in 
'/Users/kspviswa-vz/ws/onap/sdc/openecomp-ui/node_modules/dox-sequence-diagram-ui/dist'

 @ ./~/dox-sequence-diagram-ui/dist/index.js 3:45-58

 @ ./src/sdc-app/flows/SequenceDiagram.jsx

 @ ./src/sdc-app/flows/FlowsListEditorView.jsx

 @ ./src/sdc-app/flows/FlowsListEditor.js

 @ ./src/sdc-app/flows/FlowsPunchOut.jsx

 @ ./src/sdc-app/punch-outs.js

 @ multi 
(webpack)-dev-server/client?http://localhost:9000
 webpack/hot/dev-server sdc-app/punch-outs.js 
webpack-dev-server/client?http://localhost:9000
 webpack/hot/only-dev-server



ERROR in ./~/dox-sequence-diagram-ui/dist/index.js

Module not found: Error: Can't resolve 'react-dnd-html5-backend' in 
'/Users/kspviswa-vz/ws/onap/sdc/openecomp-ui/node_modules/dox-sequence-diagram-ui/dist'

 @ ./~/dox-sequence-diagram-ui/dist/index.js 3:60-94

 @ ./src/sdc-app/flows/SequenceDiagram.jsx

 @ ./src/sdc-app/flows/FlowsListEditorView.jsx

 @ ./src/sdc-app/flows/FlowsListEditor.js

 @ ./src/sdc-app/flows/FlowsPunchOut.jsx

 @ ./src/sdc-app/punch-outs.js

 @ multi 
(webpack)-dev-server/client?http://localhost:9000
 webpack/hot/dev-server sdc-app/punch-outs.js 
webpack-dev-server/client?http://localhost:9000
 webpack/hot/only-dev-server



ERROR in ./~/dox-sequence-diagram-ui/dist/index.js

Module not found: Error: Can't resolve 'react-dnd' in 
'/Users/kspviswa-vz/ws/onap/sdc/openecomp-ui/node_modules/dox-sequence-diagram-ui/dist'

 @ ./~/dox-sequence-diagram-ui/dist/index.js 3:96-116

 @ ./src/sdc-app/flows/SequenceDiagram.jsx

 @ ./src/sdc-app/flows/FlowsListEditorView.jsx

 @ ./src/sdc-app/flows/FlowsListEditor.js

 @ ./src/sdc-app/flows/FlowsPunchOut.jsx

 @ ./src/sdc-app/punch-outs.js

 @ multi 
(webpack)-dev-server/client?http://localhost:9000
 webpack/hot/dev-server sdc-app/punch-outs.js 
webpack-dev-server/client?http://localhost:9000
 webpack/hot/only-dev-server

Any help on this is highly appreciated.

BR,
Viswa
___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss

[onap-discuss] [sdnc] Weekly SDNC project team meeting

2017-07-05 Thread TIMONEY, DAN 
BEGIN:VCALENDAR
METHOD:REQUEST
PRODID:Microsoft Exchange Server 2010
VERSION:2.0
BEGIN:VTIMEZONE
TZID:Eastern Standard Time
BEGIN:STANDARD
DTSTART:16010101T02
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
RRULE:FREQ=YEARLY;INTERVAL=1;BYDAY=1SU;BYMONTH=11
END:STANDARD
BEGIN:DAYLIGHT
DTSTART:16010101T02
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
RRULE:FREQ=YEARLY;INTERVAL=1;BYDAY=2SU;BYMONTH=3
END:DAYLIGHT
END:VTIMEZONE
BEGIN:VEVENT
ORGANIZER;CN="TIMONEY, DAN":MAILTO:dt5...@att.com
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN=onap-discu
 s...@lists.onap.org:MAILTO:onap-discuss@lists.onap.org
DESCRIPTION;LANGUAGE=en-US:When: Wednesday\, July 12\, 2017 9:00 AM-9:30 AM
 . (UTC-05:00) Eastern Time (US & Canada)\nWhere: Zoom meeting - see notes 
 for logistics\n\n*~*~*~*~*~*~*~*~*~*\n\nONAP Meeting 6 is inviting you to 
 a scheduled Zoom meeting.\n\n\n\nJoin from PC\, Mac\, Linux\, iOS or Andro
 id: https://zoom.us/j/330824945\n\n\n\nOr iPhone one-tap (US Toll): 
  +16465588656\,\,330824945# or +14086380968\,\,330824945#\n\n\n\nOr Teleph
 one:\n\nDial: +1 646 558 8656 (US Toll) or +1 408 638 0968 (US Toll)\n
 \n+1 855 880 1246 (US Toll Free)\n\n+1 877 369 0926 (US Toll Free)
 \n\nMeeting ID: 330 824 945\n\nInternational numbers available: ht
 tps://zoom.us/zoomconference?m=rRItS256rDo_7UtkIznpz4jzZNmjTfbO\n\n\n
SUMMARY;LANGUAGE=en-US:[sdnc] Weekly SDNC project team meeting
DTSTART;TZID=Eastern Standard Time:20170712T09
DTEND;TZID=Eastern Standard Time:20170712T093000
UID:FA0D73F0-6408-4E0B-B374-5E162E063BC0
CLASS:PUBLIC
PRIORITY:5
DTSTAMP:20170705T131226Z
TRANSP:OPAQUE
STATUS:CONFIRMED
SEQUENCE:0
LOCATION;LANGUAGE=en-US:Zoom meeting - see notes for logistics
X-MICROSOFT-CDO-APPT-SEQUENCE:0
X-MICROSOFT-CDO-OWNERAPPTID:2115447473
X-MICROSOFT-CDO-BUSYSTATUS:TENTATIVE
X-MICROSOFT-CDO-INTENDEDSTATUS:BUSY
X-MICROSOFT-CDO-ALLDAYEVENT:FALSE
X-MICROSOFT-CDO-IMPORTANCE:1
X-MICROSOFT-CDO-INSTTYPE:0
X-MICROSOFT-DISALLOW-COUNTER:TRUE
BEGIN:VALARM
ACTION:DISPLAY
DESCRIPTION:REMINDER
TRIGGER;RELATED=START:-PT15M
END:VALARM
END:VEVENT
END:VCALENDAR
___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss

[onap-discuss] [sdc] Error while using openecomp-ui / webseal simulator

2017-07-05 Thread Viswa KSP 
Dear All,

I tried to stand-up SDC in standalone mode as per READ.ME in openecomp-ui
dir and currently stuck with below error:

*ERROR in ./~/dox-sequence-diagram-ui/dist/index.js*

*Module not found: Error: Can't resolve 'd3' in
'/Users/kspviswa-vz/ws/onap/sdc/openecomp-ui/node_modules/dox-sequence-diagram-ui/dist'*

* @ ./~/dox-sequence-diagram-ui/dist/index.js 3:45-58*

* @ ./src/sdc-app/flows/SequenceDiagram.jsx*

* @ ./src/sdc-app/flows/FlowsListEditorView.jsx*

* @ ./src/sdc-app/flows/FlowsListEditor.js*

* @ ./src/sdc-app/flows/FlowsPunchOut.jsx*

* @ ./src/sdc-app/punch-outs.js*

* @ multi (webpack)-dev-server/client?http://localhost:9000
 webpack/hot/dev-server sdc-app/punch-outs.js
webpack-dev-server/client?http://localhost:9000 
webpack/hot/only-dev-server*


*ERROR in ./~/dox-sequence-diagram-ui/dist/index.js*

*Module not found: Error: Can't resolve 'react-dnd-html5-backend' in
'/Users/kspviswa-vz/ws/onap/sdc/openecomp-ui/node_modules/dox-sequence-diagram-ui/dist'*

* @ ./~/dox-sequence-diagram-ui/dist/index.js 3:60-94*

* @ ./src/sdc-app/flows/SequenceDiagram.jsx*

* @ ./src/sdc-app/flows/FlowsListEditorView.jsx*

* @ ./src/sdc-app/flows/FlowsListEditor.js*

* @ ./src/sdc-app/flows/FlowsPunchOut.jsx*

* @ ./src/sdc-app/punch-outs.js*

* @ multi (webpack)-dev-server/client?http://localhost:9000
 webpack/hot/dev-server sdc-app/punch-outs.js
webpack-dev-server/client?http://localhost:9000 
webpack/hot/only-dev-server*


*ERROR in ./~/dox-sequence-diagram-ui/dist/index.js*

*Module not found: Error: Can't resolve 'react-dnd' in
'/Users/kspviswa-vz/ws/onap/sdc/openecomp-ui/node_modules/dox-sequence-diagram-ui/dist'*

* @ ./~/dox-sequence-diagram-ui/dist/index.js 3:96-116*

* @ ./src/sdc-app/flows/SequenceDiagram.jsx*

* @ ./src/sdc-app/flows/FlowsListEditorView.jsx*

* @ ./src/sdc-app/flows/FlowsListEditor.js*

* @ ./src/sdc-app/flows/FlowsPunchOut.jsx*

* @ ./src/sdc-app/punch-outs.js*

* @ multi (webpack)-dev-server/client?http://localhost:9000
 webpack/hot/dev-server sdc-app/punch-outs.js
webpack-dev-server/client?http://localhost:9000 
webpack/hot/only-dev-server*

Any help on this is highly appreciated.

BR,
Viswa
___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss

Re: [onap-discuss] 答复: RE: RE: [clamp][holmes] A Sample Rule of Holmes &  a Question on CLAMP

2017-07-05 Thread Lando,Michael 
+Edan,Zahi


BR,

Michael Lando
Opensource Team Lead, SDC
AT Network Application Development · NetCom
Tel Aviv | Tampa | Atlanta | New Jersey |Chicago
···
Office: +972 (3) 5451487
Mobile: +972 (54) 7833603
e-mail: ml6...@intl.att.com


From: onap-discuss-boun...@lists.onap.org 
[mailto:onap-discuss-boun...@lists.onap.org] On Behalf Of 
fu.guangr...@zte.com.cn
Sent: Wednesday, July 05, 2017 4:50 AM
To: ngu...@mail.linuxfoundation.org; Ngueko, Gervais-Martial 

Cc: du.jiaqi...@zte.com.cn; onap-discuss@lists.onap.org
Subject: [onap-discuss] 答复: RE: RE: [clamp][holmes] A Sample Rule of Holmes &  
a Question on CLAMP


Hi Martial,



Two more questions:



1.  According your previous email, policy rules are designed in CLAMP and 
distributed by SDC. Then which system will be responsible for designing and 
distributing Holmes rules? CLAMP or SDC?

2.  What's the workflow to deploy analytic apps/collectors to DCAE? Will 
CLAMP portal talk with DCAE to deploy them?



Thanks in advnace.



Br,

Guangrong








原始邮件
发件人： >;
收件人：付光荣10144542;
抄送人： 
>;杜家强10071173; 
>; 
>; 
>;
日 期 ：2017年07月04日 20:48
主 题 ：RE: RE: [clamp][holmes] A Sample Rule of Holmes &  a Question on CLAMP


Hi Guangrong,

Yes, you need to ask help from Lusheng.

Concerning the Policy, the direction of the design is to have SDC directly 
distributing policy rules to Policy (instead of CLAMP), but this is still under 
design.

Br,
Martial

From: fu.guangr...@zte.com.cn 
[mailto:fu.guangr...@zte.com.cn]
Sent: mardi 4 juillet 2017 14:37
To: 
ngu...@m0049462.ppops.net-00191d01; 
Ngueko, Gervais-Martial >
Cc: onap-discuss@lists.onap.org; 
du.jiaqi...@zte.com.cn; SHACHAM, RON 
>; JI, LUSHENG 
>; DRAGOSH, PAM 
>
Subject: 答复: RE: [clamp][holmes] A Sample Rule of Holmes &  a Question on CLAMP


Morning Martial,



Do you mean I have to turn to Lusheng for help?



My understanding is that since the template in CLAMP is exactly the same as the 
blueprint in DCAE, if Holmes could translate the template given by CLAMP, there 
will be no problem for it to interpret the blueprint provided by DCAE. 
Therefore, what matters  now is that I need to have a clear idea on how the 
template is mapped into the rule so that I could have a better understanding on 
how the whole stuff works. That's the reason I asked for a sample from both 
CLAMP and Policy.



In a nutshell, I need to know how the rule is defined in the template and then 
converted into the format which could be consumed by the drools engine.



I hope I've made myself clear.



Thanks,



Guangrong










原始邮件
发件人： >;
收件人：付光荣10144542; 
>;
抄送人：杜家强10071173;  
>; 
>; 
>;
日 期 ：2017年07月04日 20:18
主 题 ：RE: [clamp][holmes] A Sample Rule of Holmes &  a Question on CLAMP


Hi Guangrong,

To be clear and precise, CLAMP template = DCAE blueprint. So what we refer to 
as CLAMP template is  really DCAE template that CLAMP customize and send to 
SDC.  SDC then distribute this template to DCAE Orchestrator.

Br,
Martial

From: fu.guangr...@zte.com.cn 
[mailto:fu.guangr...@zte.com.cn]
Sent: mardi 4 juillet 2017 13:40
To: Ngueko, Gervais-Martial >; 
onap-discuss@lists.onap.org
Cc: du.jiaqi...@zte.com.cn
Subject: [clamp][holmes] A Sample Rule of Holmes &  a Question on CLAMP


Hi Martial,



As agreed at the last weekly meeting of CLAMP, I’m sending a (quite simple but 
easy-to-understand) sample rule of Holmes (see below). To create such a rule, 
some information for alarm identification, such as alarm code or alarm name, 
resource (where the   alarm is raised) information, etc. must be provided in 
advance.



= rule starts here =

package gsm.bsc.test

import xxx.xxx.xxx;



rule "NFVO_SameHost_Relation_Rule"

salience 120

no-loop true

when

$root : Alarm(  eventType == Alarm.EVENT_RAISED,

Re: [onap-discuss] [SDC] Need your help to deploy SDC

2017-07-05 Thread Lando,Michael 
Hi,
I just want to align.

First
docker_version: 1.0-STAGING-latest
gerrit_branch: release-1.0.0

for release one were you successful in running the demo flow?

docker_version: 1.1-STAGING-latest
gerrit_branch: master

for release candidate were you successful in running the demo?

Regarding the error you saw in the kibana please open a defect for us and we 
will review it.

The kibana is an additional functionality that is available in our application 
it does not impact the product functionality concerning the demo flow.

Regarding the vid issue you are seeing are you using the same version of vid 
and sdc (1.1-STAGING-latest for both)?










BR,

Michael Lando
Opensource & Frontend Team Lead, SDC
AT Network Application Development * NetCom
Tel Aviv | Tampa | Atlanta | New Jersey |Chicago
***
Office: +972 (3) 5451487
Mobile: +972 (54) 7833603
e-mail: ml6...@intl.att.com


From: onap-discuss-boun...@lists.onap.org 
[mailto:onap-discuss-boun...@lists.onap.org] On Behalf Of 
ajay.priyadar...@ril.com
Sent: Wednesday, July 05, 2017 9:52 AM
To: wei.d.c...@intel.com; onap-discuss@lists.onap.org
Subject: Re: [onap-discuss] [SDC] Need your help to deploy SDC

Hi Chen,

I have created two setups with
artifacts_version: 1.1.0-SNAPSHOT
docker_version: 1.1-STAGING-latest / 1.0-STAGING-latest
gerrit_branch: release-1.0.0

With docker version 1.1-STAGING-latest, I found the error you are getting.

Running handlers:
[2017-07-04T08:48:29+00:00] ERROR: Running exception handlers
Running handlers complete
[2017-07-04T08:48:29+00:00] ERROR: Exception handlers complete
Chef Client failed. 0 resources updated in 00 seconds
[2017-07-04T08:48:29+00:00] FATAL: Stacktrace dumped to 
/root/chef-solo/cache/chef-stacktrace.out
[2017-07-04T08:48:29+00:00] FATAL: Please provide the contents of the 
stacktrace.out file if you file a bug report
[2017-07-04T08:48:29+00:00] ERROR: 
cookbook_file[/usr/share/elasticsearch/config/kibana_dashboard_virtualization.json]
 (sdc-elasticsearch::ES_6_create_kibana_dashboard_virtualization line 1) had an 
error: Chef::Exceptions::FileNotFound: Cookbook 'sdc-elasticsearch' (0.0.0) 
does not contain a file at any of these locations:
  files/debian-8.6/kibana_dashboard_virtualization.json
  files/debian/kibana_dashboard_virtualization.json
  files/default/kibana_dashboard_virtualization.json
  files/kibana_dashboard_virtualization.json

This cookbook _does_ contain: 
['files/default/dashboard_Monitoring-Dashboared.json','files/default/dashboard_BI-Dashboard.json','files/default/visualization_JVM-used-Threads-Num.json','files/default/logging.yml','files/default/visualization_Show-all-distributed-services.json','files/default/visualization_host-used-CPU.json','files/default/visualization_JVM-used-CPU.json','files/default/visualization_host-used-Threads-Num.json','files/default/visualization_number-of-user-accesses.json','files/default/visualization_Show-all-created-Resources-slash-Services-slash-Products.json','files/default/visualization_JVM-used-Memory.json','files/default/visualization_Show-all-certified-services-ampersand-resources-(per-day).json']
[2017-07-04T08:48:29+00:00] FATAL: Chef::Exceptions::ChildConvergeError: Chef 
run process exited unsuccessfully (exit code 1)
[2017-07-04 09:38:50,215][INFO ][cluster.metadata ] [a196cd3a4697] 
[auditingevents-2017-07] update_mapping [distributionengineevent]
[2017-07-05 05:25:46,814][DEBUG][action.index ] [a196cd3a4697] 
[auditingevents-2017-07][0], node[hJtkhcP5S3yBoAL9_NqmAA], [P], v[4], 
s[STARTED], a[id=RZ9636CoT9qtFcMqRa0rvQ]: Failed to execute [index 
{[auditingevents-2017-07][externalapievent][AV0RNiK5ZsU_ZS6SiObx], 
source[{"MODIFIER":"","STATUS":"404","ACTION":"GetFilteredAssetList","TIMESTAMP":"2017-07-05
 05:25:46.809 
UTC","RESOURCE_URL":"\/sdc\/v1\/catalog\/services?distributionStatus=DISTRIBUTED","REQUEST_ID":"80c4e3e2-601e-431e-a710-dff9cd83325c","CONSUMER_ID":"VID","DESC":"SVC4642:
 No services were found to match criteria distributionStatus=DISTRIBUTED"}]}]
MapperParsingException[failed to parse [TIMESTAMP]]; nested: 
IllegalArgumentException[Invalid format: "2017-07-05 05:25:46.809 UTC" is 
malformed at " 05:25:46.809 UTC"];
at 
org.elasticsearch.index.mapper.FieldMapper.parse(FieldMapper.java:339)
at 
org.elasticsearch.index.mapper.DocumentParser.parseObjectOrField(DocumentParser.java:314)
at 
org.elasticsearch.index.mapper.DocumentParser.parseAndMergeUpdate(DocumentParser.java:762)
at 
org.elasticsearch.index.mapper.DocumentParser.parseDynamicValue(DocumentParser.java:676)
at 
org.elasticsearch.index.mapper.DocumentParser.parseValue(DocumentParser.java:447)
at 
org.elasticsearch.index.mapper.DocumentParser.parseObject(DocumentParser.java:267)
at 
org.elasticsearch.index.mapper.DocumentParser.innerParseDocument(DocumentParser.java:127)
at

Re: [onap-discuss] [clamp][holmes] A Sample Rule of Holmes &  a Question on CLAMP

2017-07-05 Thread Ngueko, Gervais-Martial 
Hi Guangrong,


1.  In the current CLAMP design the settings of the configuration of 
Micro-service (so in this case Holmes rules) are made in CLAMP and send as 
policies to Policy. Policy then distributes them to the micro-service. Those 
are called in CLAMP configuration policies.
In my previous emails I was talking about policies for policy itself (called in 
CLAMP operational policies) so not the configuration/rulings of micro-services 
which is different. Anyway, this is still under discussion! And at this point 
is just talk, so nothing has been implemented or finalized yet in that 
direction for operational policies (Policy specific rules) used by Policy 
itself!!.

2.  Yes, CLAMP talks to DCAE to trigger the deployment of DCAE 
micro-services.

Br,
Martial

From: fu.guangr...@zte.com.cn [mailto:fu.guangr...@zte.com.cn]
Sent: mercredi 5 juillet 2017 03:50
To: ngu...@m0049287.ppops.net-00191d01; Ngueko, Gervais-Martial 

Cc: onap-discuss@lists.onap.org; du.jiaqi...@zte.com.cn; SHACHAM, RON 
; JI, LUSHENG ; DRAGOSH, PAM 

Subject: 答复: RE: RE: [clamp][holmes] A Sample Rule of Holmes &  a Question on 
CLAMP


Hi Martial,



Two more questions:



1. According your previous email, policy rules are designed in CLAMP and 
distributed by SDC. Then which system will be responsible for designing and 
distributing Holmes rules? CLAMP or SDC?

2. What's the workflow to deploy analytic apps/collectors to DCAE? Will 
CLAMP portal talk with DCAE to deploy them?



Thanks in advnace.



Br,

Guangrong








原始邮件
发件人： >;
收件人：付光荣10144542;
抄送人： 
>;杜家强10071173; 
>; 
>; 
>;
日 期 ：2017年07月04日 20:48
主 题 ：RE: RE: [clamp][holmes] A Sample Rule of Holmes &  a Question on CLAMP


Hi Guangrong,

Yes, you need to ask help from Lusheng.

Concerning the Policy, the direction of the design is to have SDC directly 
distributing policy rules to Policy (instead of CLAMP), but this is still under 
design.

Br,
Martial

From: fu.guangr...@zte.com.cn 
[mailto:fu.guangr...@zte.com.cn]
Sent: mardi 4 juillet 2017 14:37
To: 
ngu...@m0049462.ppops.net-00191d01; 
Ngueko, Gervais-Martial >
Cc: onap-discuss@lists.onap.org; 
du.jiaqi...@zte.com.cn; SHACHAM, RON 
>; JI, LUSHENG 
>; DRAGOSH, PAM 
>
Subject: 答复: RE: [clamp][holmes] A Sample Rule of Holmes &  a Question on CLAMP


Morning Martial,



Do you mean I have to turn to Lusheng for help?



My understanding is that since the template in CLAMP is exactly the same as the 
blueprint in DCAE, if Holmes could translate the template given by CLAMP, there 
will be no problem for it to interpret the blueprint provided by DCAE. 
Therefore, what matters  now is that I need to have a clear idea on how the 
template is mapped into the rule so that I could have a better understanding on 
how the whole stuff works. That's the reason I asked for a sample from both 
CLAMP and Policy.



In a nutshell, I need to know how the rule is defined in the template and then 
converted into the format which could be consumed by the drools engine.



I hope I've made myself clear.



Thanks,



Guangrong










原始邮件
发件人： >;
收件人：付光荣10144542; 
>;
抄送人：杜家强10071173;  
>; 
>; 
>;
日 期 ：2017年07月04日 20:18
主 题 ：RE: [clamp][holmes] A Sample Rule of Holmes &  a Question on CLAMP


Hi Guangrong,

To be clear and precise, CLAMP template = DCAE blueprint. So what we refer to 
as CLAMP template is  really DCAE template that CLAMP customize and send to 
SDC.  SDC then distribute this template to DCAE Orchestrator.

Br,
Martial

From: fu.guangr...@zte.com.cn 
[mailto:fu.guangr...@zte.com.cn]
Sent: mardi 4 juillet 2017 13:40
To: Ngueko, Gervais-Martial >; 
onap-discuss@lists.onap.org
Cc: du.jiaqi...@zte.com.cn
Subject: [clamp][holmes] A Sample Rule of Holmes &  a Question on CLAMP


Hi Martial,



As agreed at the last weekly meeting of CLAMP, I’m sending a

Re: [onap-discuss] [SDC] Need your help to deploy SDC

2017-07-05 Thread Ajay.Priyadarshi 
Hi Chen,

I have created two setups with
artifacts_version: 1.1.0-SNAPSHOT
docker_version: 1.1-STAGING-latest / 1.0-STAGING-latest
gerrit_branch: release-1.0.0

With docker version 1.1-STAGING-latest, I found the error you are getting.

Running handlers:
[2017-07-04T08:48:29+00:00] ERROR: Running exception handlers
Running handlers complete
[2017-07-04T08:48:29+00:00] ERROR: Exception handlers complete
Chef Client failed. 0 resources updated in 00 seconds
[2017-07-04T08:48:29+00:00] FATAL: Stacktrace dumped to 
/root/chef-solo/cache/chef-stacktrace.out
[2017-07-04T08:48:29+00:00] FATAL: Please provide the contents of the 
stacktrace.out file if you file a bug report
[2017-07-04T08:48:29+00:00] ERROR: 
cookbook_file[/usr/share/elasticsearch/config/kibana_dashboard_virtualization.json]
 (sdc-elasticsearch::ES_6_create_kibana_dashboard_virtualization line 1) had an 
error: Chef::Exceptions::FileNotFound: Cookbook 'sdc-elasticsearch' (0.0.0) 
does not contain a file at any of these locations:
  files/debian-8.6/kibana_dashboard_virtualization.json
  files/debian/kibana_dashboard_virtualization.json
  files/default/kibana_dashboard_virtualization.json
  files/kibana_dashboard_virtualization.json

This cookbook _does_ contain: 
['files/default/dashboard_Monitoring-Dashboared.json','files/default/dashboard_BI-Dashboard.json','files/default/visualization_JVM-used-Threads-Num.json','files/default/logging.yml','files/default/visualization_Show-all-distributed-services.json','files/default/visualization_host-used-CPU.json','files/default/visualization_JVM-used-CPU.json','files/default/visualization_host-used-Threads-Num.json','files/default/visualization_number-of-user-accesses.json','files/default/visualization_Show-all-created-Resources-slash-Services-slash-Products.json','files/default/visualization_JVM-used-Memory.json','files/default/visualization_Show-all-certified-services-ampersand-resources-(per-day).json']
[2017-07-04T08:48:29+00:00] FATAL: Chef::Exceptions::ChildConvergeError: Chef 
run process exited unsuccessfully (exit code 1)
[2017-07-04 09:38:50,215][INFO ][cluster.metadata ] [a196cd3a4697] 
[auditingevents-2017-07] update_mapping [distributionengineevent]
[2017-07-05 05:25:46,814][DEBUG][action.index ] [a196cd3a4697] 
[auditingevents-2017-07][0], node[hJtkhcP5S3yBoAL9_NqmAA], [P], v[4], 
s[STARTED], a[id=RZ9636CoT9qtFcMqRa0rvQ]: Failed to execute [index 
{[auditingevents-2017-07][externalapievent][AV0RNiK5ZsU_ZS6SiObx], 
source[{"MODIFIER":"","STATUS":"404","ACTION":"GetFilteredAssetList","TIMESTAMP":"2017-07-05
 05:25:46.809 
UTC","RESOURCE_URL":"\/sdc\/v1\/catalog\/services?distributionStatus=DISTRIBUTED","REQUEST_ID":"80c4e3e2-601e-431e-a710-dff9cd83325c","CONSUMER_ID":"VID","DESC":"SVC4642:
 No services were found to match criteria distributionStatus=DISTRIBUTED"}]}]
MapperParsingException[failed to parse [TIMESTAMP]]; nested: 
IllegalArgumentException[Invalid format: "2017-07-05 05:25:46.809 UTC" is 
malformed at " 05:25:46.809 UTC"];
at 
org.elasticsearch.index.mapper.FieldMapper.parse(FieldMapper.java:339)
at 
org.elasticsearch.index.mapper.DocumentParser.parseObjectOrField(DocumentParser.java:314)
at 
org.elasticsearch.index.mapper.DocumentParser.parseAndMergeUpdate(DocumentParser.java:762)
at 
org.elasticsearch.index.mapper.DocumentParser.parseDynamicValue(DocumentParser.java:676)
at 
org.elasticsearch.index.mapper.DocumentParser.parseValue(DocumentParser.java:447)
at 
org.elasticsearch.index.mapper.DocumentParser.parseObject(DocumentParser.java:267)
at 
org.elasticsearch.index.mapper.DocumentParser.innerParseDocument(DocumentParser.java:127)
at 
org.elasticsearch.index.mapper.DocumentParser.parseDocument(DocumentParser.java:79)
at 
org.elasticsearch.index.mapper.DocumentMapper.parse(DocumentMapper.java:304)
at 
org.elasticsearch.index.shard.IndexShard.prepareCreate(IndexShard.java:517)
at 
org.elasticsearch.index.shard.IndexShard.prepareCreate(IndexShard.java:508)
at 
org.elasticsearch.action.support.replication.TransportReplicationAction.prepareIndexOperationOnPrimary(TransportReplicationAction.java:1053)
at 
org.elasticsearch.action.support.replication.TransportReplicationAction.executeIndexRequestOnPrimary(TransportReplicationAction.java:1061)
at 
org.elasticsearch.action.index.TransportIndexAction.shardOperationOnPrimary(TransportIndexAction.java:170)
at 
org.elasticsearch.action.support.replication.TransportReplicationAction$PrimaryPhase.performOnPrimary(TransportReplicationAction.java:579)
at 
org.elasticsearch.action.support.replication.TransportReplicationAction$PrimaryPhase$1.doRun(TransportReplicationAction.java:452)
at 
org.elasticsearch.common.util.concurrent.AbstractRunnable.run(AbstractRunnable.java:37)
at 
java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1142)
at

Re: [onap-discuss] [SDC] Need your help to deploy SDC

2017-07-05 Thread Chen, Wei D 
Hi Ajay,

Thanks for your feedback!
I think that is not the root cause in my side, I just need wait more time so 
that backend can connect with Cassandra, but SDC still cannot work, health 
checkup scripts always show me Titan graph is down, I have reinstalled ONAP and 
change the environment as below (as mentioned in another thread):
  * artifacts_version:  from 1.0.0  
 to  1.1.0-SNAPSHOT
  * docker_version:from 1.0-STAGING-latest to latest

Still doesn't work.

Ajay, how you ever enabled SDC? What's the artefact version and the docker 
version are you using?

sdc-es seems to fail as well,
$ sudo docker logs sdc-es
...
d: Cookbook 'sdc-elasticsearch' (0.0.0) does not contain a file at any of these 
locations:
  files/debian-8.6/kibana_dashboard_virtualization.json
  files/debian/kibana_dashboard_virtualization.json
  files/default/kibana_dashboard_virtualization.json
  files/kibana_dashboard_virtualization.json

This cookbook _does_ contain: 
['files/default/dashboard_Monitoring-Dashboared.json','files/default/logging.yml','files/default/visualization_JVM-used-CPU.json','files/default/visualization_JVM-used-Memory.json','files/default/visualization_JVM-used-Threads-Num.json','files/default/visualization_Show-all-certified-services-ampersand-resources-(per-day).json','files/default/visualization_Show-all-created-Resources-slash-Services-slash-Products.json','files/default/visualization_Show-all-distributed-services.json','files/default/visualization_host-used-CPU.json','files/default/visualization_host-used-Threads-Num.json','files/default/visualization_number-of-user-accesses.json','files/default/dashboard_BI-Dashboard.json']
[2017-07-04T21:38:40+00:00] FATAL: Chef::Exceptions::ChildConvergeError: Chef 
run process exited unsuccessfully (exit code 1)

From: ajay.priyadar...@ril.com [mailto:ajay.priyadar...@ril.com]
Sent: Wednesday, July 5, 2017 1:52 PM
To: Chen, Wei D ; onap-discuss@lists.onap.org
Subject: RE: [onap-discuss] [SDC] Need your help to deploy SDC


Hi Dave chen,

I observed this issue as using openstack_float, and found that CS and ES were 
not able to connect. Although this time all routing is working fine.
Errors:

1.  stderrout.log
com.datastax.driver.core.exceptions.NoHostAvailableException: All host(s) tried 
for query failed (tried: /10.64.105.82:9042 
(com.datastax.driver.core.TransportException: [/10.64.105.82:9042] Cannot 
connect))

2.  /data/logs/BE/ASDC/ASDC-BE/error.log

2017-06-23T06:12:11.828Z|||ES-Health-Check-Thread||ASDC-BE||ERROR|||192.168.3.1||o.o.sdc.be.dao.impl.ESCatalogDAO||ActivityType=,
 Desc=

Resolution:
File /opt/config/public_ip.txt uses sdc_floating_ip (public ip). Even (CS is up 
on -host-ip 0.0.0.0 -host-port 9042, ES is on -host-ip 0.0.0.0 -host-port 
9200). I changed the /opt/config/public_ip.txt value to private_ip .


You also have same error
Caused by: com.datastax.driver.core.exceptions.NoHostAvailableException: All 
host(s) tried for query failed (tried: /192.168.4.116:9042 
(com.datastax.driver.core.TransportException: [/192.168.4.116:9042] Cannot 
connect))

My cassandra was also showing all required namespaces, but unable to serve. So 
I observed and resolved as above. Hopefully it help you.

Regards,
Ajay Priyadarshi





Date: Sat, 1 Jul 2017 07:59:45 +

From: "Chen, Wei D" >

To: "onap-discuss@lists.onap.org" 
>

Subject: [onap-discuss]  [SDC] Need your help to deploy SDC

Message-ID:


>



Content-Type: text/plain; charset="us-ascii"



Hi All,



I am trying to enable SDC in the demo project, the ONAP is on top of vanilla 
OpenStack, just want to have a try on how it works from portal, but I got 
bunches of issues and the latest one is from Cassandra, seen from the log it 
seems like 9042 port is not available (log is attached), so I go to the 
container and run /root/startup.sh manually, firstly, I can access the DB, but 
some mins later I cannot access the DB anymore,



This is what I get from the DB couple of mins after run startup.sh.



# cqlsh -u cassandra -p Aa1234%^! 10.0.3.1







Namespaces:



cassandra@cqlsh> DESCRIBE keyspaces;







system_auth   titan   sdcaudit  sdcartifact



sdccomponent  system  dox   system_traces





I check both 9160 and 9042 inside container, seems like they are opened,

root@5aad37f3ec48:/var/log/cassandra# netstat -anp | grep 9042

tcp6   0  0 0.0.0.0:9042:::*LISTEN  
-

root@5aad37f3ec48:/var/log/cassandra# netstat -anp | grep 9160

tcp0  0 0.0.0.0:91600.0.0.0:*   LISTEN  
-