RE: User Profile Service

[Marko Salonen]

Did anyone configure other services first, because the way I read the Harbar 
procedure you don't. But then I thought UPS was dependent on other services? Or 
does it only work with other services like Managed Metadata once configured...

Regards,

Marko

--
Marko Salonen
Senior Applications Analyst
Moreton Bay Regional Council
220 Gympie Road, Strathpine Q 4500
P 07 3480 6531
F 07 5433 2188
www.moretonbay.qld.gov.au

From: ozmoss-boun...@ozmoss.com [mailto:ozmoss-boun...@ozmoss.com] On Behalf Of 
Marko Salonen
Sent: Friday, 24 August 2012 12:21 PM
To: ozMOSS (ozmoss@ozmoss.com)
Subject: User Profile Service

Hi All

Wow, what a week. I have been banging my head against a brick wall with this 
one, and I feel defeated. Not a great introduction to SharePoint for my 
colleagues, and I amazed that this is so difficult. To make myself feel a 
little better I just remember that the leader of Kony 2012 got arrested before 
Kony did! :)

Today I started from a completely clean environment. Recreated my service 
accounts, and went over the accounts in 
http://www.harbar.net/articles/sp2010ups.aspx step by step with our networking 
guys, and followed the instructions to the letter. Alas to no avail.

When others have followed the instructions by Harbar, have you started any 
other services?  If yes, which ones?

To recap

Win 2008 R2
SharePoint 2010 SP1 July 2012 CU

SQL 2008 R2

I open the 1433 port
I create an SQL Alias
I set local admin access
I set local login

Run Config Wizard (not using the AutoSPInstall)

I then follow the Harbar instructions to create the UPS.

Regards,

Marko

--
Marko Salonen
Senior Applications Analyst
Moreton Bay Regional Council
220 Gympie Road, Strathpine Q 4500
P 07 3480 6531
F 07 5433 2188
www.moretonbay.qld.gov.au


MORETON BAY REGIONAL COUNCIL (MBRC) PRIVILEGED PRIVATE AND CONFIDENTIAL - The 
information contained in this e-mail and any attachments is confidential and 
may attract legal privilege. It is only intended for the named recipient/s. If 
you are not a named recipient any use of this information including copying, 
distribution and publication is prohibited. Confidentiality and legal privilege 
are not waived or lost as a result of mistaken or erroneous delivery. If you 
are not a named recipient, please delete all copies immediately and contact the 
sender to advise of the error.

It is recommended that you scan this email and any attachment before opening. 
MBRC does not accept any responsibility or liability for loss or damage arising 
directly or indirectly from opening this email, opening any attachments or any 
communication errors.

The views expressed in this email and any attachments are the personal views of 
the sender unless otherwise stated.
___
ozmoss mailing list
ozmoss@ozmoss.com
http://prdlxvm0001.codify.net/mailman/listinfo/ozmoss

RE: User Profile Service

[Marko Salonen]

Not sure, cause when I ran the wizard to create the services the profile synch 
worked

Regards,

Marko

--
Marko Salonen
Senior Applications Analyst
Moreton Bay Regional Council
220 Gympie Road, Strathpine Q 4500
P 07 3480 6531
F 07 5433 2188
www.moretonbay.qld.gov.au

From: ozmoss-boun...@ozmoss.com [mailto:ozmoss-boun...@ozmoss.com] On Behalf Of 
Chris Howell
Sent: Friday, 24 August 2012 2:34 PM
To: ozMOSS
Subject: Re: User Profile Service

I believe the patch levels apply to R2 as well:

http://www.sqlsecurity.com/faqs-1/sql-server-versions/2008-r2
On 24 August 2012 13:28, Nigel Hertz 
mailto:nigel.he...@stockland.com.au>> wrote:
That's for SQL 2008, Marko is on SQL 2008 R2 I think.

From: ozmoss-boun...@ozmoss.com 
[mailto:ozmoss-boun...@ozmoss.com] On Behalf 
Of Chris Howell
Sent: Friday, 24 August 2012 1:27 PM

To: ozMOSS
Subject: Re: User Profile Service

The notes I have are that the SQL must be SP1 CU2 (or higher).

From:
http://technet.microsoft.com/en-us/library/ee721049.aspx#prereqs

"You must have a full installation of Microsoft SQL Server, not the Express 
edition. If you are using SQL Server 2008, you must have Service Pack 1 (SP1) 
and Cumulative Update 2 (CU2) "
On 24 August 2012 12:55, Marko Salonen 
mailto:marko.salo...@moretonbay.qld.gov.au>>
 wrote:
10.50.1600.1  so SQL 2008 R2 with no patches

Regards,

Marko

--
Marko Salonen
Senior Applications Analyst
Moreton Bay Regional Council
220 Gympie Road, Strathpine Q 4500
P 07 3480 6531
F 07 5433 2188
www.moretonbay.qld.gov.au

From: ozmoss-boun...@ozmoss.com 
[mailto:ozmoss-boun...@ozmoss.com] On Behalf 
Of Chris Howell
Sent: Friday, 24 August 2012 12:48 PM
To: ozMOSS
Subject: Re: User Profile Service

Hi Marco,

What is your patch level on the SQL server?

>From my experience with UPS, all my issues were fixed by a SQL patch.

Chris
On 24 August 2012 12:20, Marko Salonen 
mailto:marko.salo...@moretonbay.qld.gov.au>>
 wrote:
Hi All

Wow, what a week. I have been banging my head against a brick wall with this 
one, and I feel defeated. Not a great introduction to SharePoint for my 
colleagues, and I amazed that this is so difficult. To make myself feel a 
little better I just remember that the leader of Kony 2012 got arrested before 
Kony did! :)

Today I started from a completely clean environment. Recreated my service 
accounts, and went over the accounts in 
http://www.harbar.net/articles/sp2010ups.aspx step by step with our networking 
guys, and followed the instructions to the letter. Alas to no avail.

When others have followed the instructions by Harbar, have you started any 
other services?  If yes, which ones?

To recap

Win 2008 R2
SharePoint 2010 SP1 July 2012 CU

SQL 2008 R2

I open the 1433 port
I create an SQL Alias
I set local admin access
I set local login

Run Config Wizard (not using the AutoSPInstall)

I then follow the Harbar instructions to create the UPS.

Regards,

Marko

--
Marko Salonen
Senior Applications Analyst
Moreton Bay Regional Council
220 Gympie Road, Strathpine Q 4500
P 07 3480 6531
F 07 5433 2188
www.moretonbay.qld.gov.au


MORETON BAY REGIONAL COUNCIL (MBRC) PRIVILEGED PRIVATE AND CONFIDENTIAL - The 
information contained in this e-mail and any attachments is confidential and 
may attract legal privilege. It is only intended for the named recipient/s. If 
you are not a named recipient any use of this information including copying, 
distribution and publication is prohibited. Confidentiality and legal privilege 
are not waived or lost as a result of mistaken or erroneous delivery. If you 
are not a named recipient, please delete all copies immediately and contact the 
sender to advise of the error.

It is recommended that you scan this email and any attachment before opening. 
MBRC does not accept any responsibility or liability for loss or damage arising 
directly or indirectly from opening this email, opening any attachments or any 
communication errors.

The views expressed in this email and any attachments are the personal views of 
the sender unless otherwise stated.

___
ozmoss mailing list
ozmoss@ozmoss.com
http://prdlxvm0001.codify.net/mailman/listinfo/ozmoss


___
ozmoss mailing list
ozmoss@ozmoss.com
http://prdlxvm0001.codify.net/mailman/listinfo/ozmoss



Stockland Notice: If this communication has been sent to you by mistake, please 
delete and notify us. If it has been sent to you by mistake, legal privilege is 
not waived or lost and you are not entitled to use it in any way. Stockland and 
its subsidiaries reserve the right to monitor e-mail communication through its 
networks.

___

Re: User Profile Service

[Chris Howell]

I believe the patch levels apply to R2 as well:

http://www.sqlsecurity.com/faqs-1/sql-server-versions/2008-r2

On 24 August 2012 13:28, Nigel Hertz  wrote:

>  That’s for SQL 2008, Marko is on SQL 2008 R2 I think.
>
> ** **
>
> *From:* ozmoss-boun...@ozmoss.com [mailto:ozmoss-boun...@ozmoss.com] *On
> Behalf Of *Chris Howell
> *Sent:* Friday, 24 August 2012 1:27 PM
>
> *To:* ozMOSS
> *Subject:* Re: User Profile Service
>
> ** **
>
> The notes I have are that the SQL must be SP1 CU2 (or higher).
>
> ** **
>
> From:
>
> http://technet.microsoft.com/en-us/library/ee721049.aspx#prereqs
>
> "You must have a full installation of Microsoft SQL Server, not the
> Express edition. If you are using SQL Server 2008, you must have Service
> Pack 1 (SP1) and Cumulative Update 2 (CU2) " 
>
> On 24 August 2012 12:55, Marko Salonen <
> marko.salo...@moretonbay.qld.gov.au> wrote:
>
> 10.50.1600.1  so SQL 2008 R2 with no patches
>
>  
>
> Regards,
>
>  
>
> Marko
>
>  
>
> -- 
>
> Marko Salonen
> Senior Applications Analyst
>
> Moreton Bay Regional Council
> 220 Gympie Road, Strathpine Q 4500
> P 07 3480 6531
>
> F 07 5433 2188
>
> www.moretonbay.qld.gov.au
>
>  
>
> *From:* ozmoss-boun...@ozmoss.com [mailto:ozmoss-boun...@ozmoss.com] *On
> Behalf Of *Chris Howell
> *Sent:* Friday, 24 August 2012 12:48 PM
> *To:* ozMOSS
> *Subject:* Re: User Profile Service
>
>  
>
> Hi Marco,
>
>  
>
> What is your patch level on the SQL server?
>
>  
>
> From my experience with UPS, all my issues were fixed by a SQL patch.
>
>  
>
> Chris
>
> On 24 August 2012 12:20, Marko Salonen <
> marko.salo...@moretonbay.qld.gov.au> wrote:
>
> Hi All
>
>  
>
> Wow, what a week. I have been banging my head against a brick wall with
> this one, and I feel defeated. Not a great introduction to SharePoint for
> my colleagues, and I amazed that this is so difficult. To make myself feel
> a little better I just remember that the leader of Kony 2012 got arrested
> before Kony did! J
>
>  
>
> Today I started from a completely clean environment. Recreated my service
> accounts, and went over the accounts in
> http://www.harbar.net/articles/sp2010ups.aspx step by step with our
> networking guys, and followed the instructions to the letter. Alas to no
> avail. 
>
>  
>
> When others have followed the instructions by Harbar, have you started any
> other services?  If yes, which ones?
>
>  
>
> To recap
>
>  
>
> Win 2008 R2
>
> SharePoint 2010 SP1 July 2012 CU
>
>  
>
> SQL 2008 R2
>
>  
>
> I open the 1433 port
>
> I create an SQL Alias
>
> I set local admin access
>
> I set local login
>
>  
>
> Run Config Wizard (not using the AutoSPInstall)
>
>  
>
> I then follow the Harbar instructions to create the UPS.
>
>  
>
> Regards,
>
>  
>
> Marko
>
>  
>
> -- 
>
> Marko Salonen
> Senior Applications Analyst
>
> Moreton Bay Regional Council
> 220 Gympie Road, Strathpine Q 4500
> P 07 3480 6531
>
> F 07 5433 2188
>
> www.moretonbay.qld.gov.au
>
>  
>
> MORETON BAY REGIONAL COUNCIL (MBRC) PRIVILEGED PRIVATE AND CONFIDENTIAL -
> The information contained in this e-mail and any attachments is
> confidential and may attract legal privilege. It is only intended for the
> named recipient/s. If you are not a named recipient any use of this
> information including copying, distribution and publication is prohibited.
> Confidentiality and legal privilege are not waived or lost as a result of
> mistaken or erroneous delivery. If you are not a named recipient, please
> delete all copies immediately and contact the sender to advise of the error.
> 
>
> It is recommended that you scan this email and any attachment before
> opening. MBRC does not accept any responsibility or liability for loss or
> damage arising directly or indirectly from opening this email, opening any
> attachments or any communication errors.
>
> The views expressed in this email and any attachments are the personal
> views of the sender unless otherwise stated.
>
>
> ___
> ozmoss mailing list
> ozmoss@ozmoss.com
> http://prdlxvm0001.codify.net/mailman/listinfo/ozmoss
>
>  
>
>
> ___
> ozmoss mailing list
> ozmoss@ozmoss.com
> http://prdlxvm0001.codify.net/mailman/listinfo/ozmoss
>
> ** **
>
> --
> Stockland Notice: If this communication has been sent to you by mistake,
> please delete and notify us. If it has been sent to you by mistake, legal
> privilege is not waived or lost and you are not entitled to use it in any
> way. Stockland and its subsidiaries reserve the right to monitor e-mail
> communication through its networks.
>
> ___
> ozmoss mailing list
> ozmoss@ozmoss.com
> htt

RE: User Profile Service

[Marko Salonen]

Yes, R2. And I have configured the AD directory changes as required.

I think I am going to leave it for now, have a chillaxing weekend and look at 
it again next week with fresh eyes.

Appreciate everyone's input!

Regards,

Marko

--
Marko Salonen
Senior Applications Analyst
Moreton Bay Regional Council
220 Gympie Road, Strathpine Q 4500
P 07 3480 6531
F 07 5433 2188
www.moretonbay.qld.gov.au

From: ozmoss-boun...@ozmoss.com [mailto:ozmoss-boun...@ozmoss.com] On Behalf Of 
Roger Carran
Sent: Friday, 24 August 2012 1:02 PM
To: ozMOSS
Subject: RE: User Profile Service

Have you ensured that the service account has Replicate Directory Changes 
rights within AD?

Kind Regards,


Roger Carran
Sharing Minds
Knowledge | Communication | Collaboration | Productivity
Mobile: 0411 598 110
Web: www.SharingMinds.com.au

Thinking about upgrading your Intranet? Then think Sharing Minds!

From: ozmoss-boun...@ozmoss.com [mailto:ozmoss-boun...@ozmoss.com] On Behalf Of 
Marko Salonen
Sent: Friday, 24 August 2012 12:56 PM
To: ozMOSS
Subject: RE: User Profile Service

10.50.1600.1  so SQL 2008 R2 with no patches

Regards,

Marko

--
Marko Salonen
Senior Applications Analyst
Moreton Bay Regional Council
220 Gympie Road, Strathpine Q 4500
P 07 3480 6531
F 07 5433 2188
www.moretonbay.qld.gov.au

From: ozmoss-boun...@ozmoss.com 
[mailto:ozmoss-boun...@ozmoss.com] 
On Behalf Of Chris Howell
Sent: Friday, 24 August 2012 12:48 PM
To: ozMOSS
Subject: Re: User Profile Service

Hi Marco,

What is your patch level on the SQL server?

>From my experience with UPS, all my issues were fixed by a SQL patch.

Chris
On 24 August 2012 12:20, Marko Salonen 
mailto:marko.salo...@moretonbay.qld.gov.au>>
 wrote:
Hi All

Wow, what a week. I have been banging my head against a brick wall with this 
one, and I feel defeated. Not a great introduction to SharePoint for my 
colleagues, and I amazed that this is so difficult. To make myself feel a 
little better I just remember that the leader of Kony 2012 got arrested before 
Kony did! :)

Today I started from a completely clean environment. Recreated my service 
accounts, and went over the accounts in 
http://www.harbar.net/articles/sp2010ups.aspx step by step with our networking 
guys, and followed the instructions to the letter. Alas to no avail.

When others have followed the instructions by Harbar, have you started any 
other services?  If yes, which ones?

To recap

Win 2008 R2
SharePoint 2010 SP1 July 2012 CU

SQL 2008 R2

I open the 1433 port
I create an SQL Alias
I set local admin access
I set local login

Run Config Wizard (not using the AutoSPInstall)

I then follow the Harbar instructions to create the UPS.

Regards,

Marko

--
Marko Salonen
Senior Applications Analyst
Moreton Bay Regional Council
220 Gympie Road, Strathpine Q 4500
P 07 3480 6531
F 07 5433 2188
www.moretonbay.qld.gov.au


MORETON BAY REGIONAL COUNCIL (MBRC) PRIVILEGED PRIVATE AND CONFIDENTIAL - The 
information contained in this e-mail and any attachments is confidential and 
may attract legal privilege. It is only intended for the named recipient/s. If 
you are not a named recipient any use of this information including copying, 
distribution and publication is prohibited. Confidentiality and legal privilege 
are not waived or lost as a result of mistaken or erroneous delivery. If you 
are not a named recipient, please delete all copies immediately and contact the 
sender to advise of the error.

It is recommended that you scan this email and any attachment before opening. 
MBRC does not accept any responsibility or liability for loss or damage arising 
directly or indirectly from opening this email, opening any attachments or any 
communication errors.

The views expressed in this email and any attachments are the personal views of 
the sender unless otherwise stated.

___
ozmoss mailing list
ozmoss@ozmoss.com
http://prdlxvm0001.codify.net/mailman/listinfo/ozmoss

___
ozmoss mailing list
ozmoss@ozmoss.com
http://prdlxvm0001.codify.net/mailman/listinfo/ozmoss

Re: User Profile Service

[Sezai Komur]

Hey Marko,

The approach I take with setting this up in new non-prod environments is to:

Backup and restore the *ProfileDB* from production into the SQL Server of
the new environment, and also the *SocialDB*.
DO NOT restore the *SyncDB*
Use the following powershell to provision the service application:
New-SPServiceApplicationPool –Name "User Profile Service Application Pool"
–Account "DOMAIN\UPSAACCOUNT"
$upa= New-SPProfileServiceApplication –Name "User Profile Service
Application" –ApplicationPool "User Profile Service Application Pool"
–ProfileDBName "RESTORED_ProfileDB" –SocialDBName "RESTORED_SocialDB"
–ProfileSyncDBName "DOESNT_EXIST_YET_SyncDB"
New-SPProfileServiceApplicationProxy –ServiceApplication $upa –Name "User
Profile Service Application Proxy" –DefaultProxyGroup
Note the above command will create a fresh new SyncDB and reuse your
restored ProfileDB and SocialDB.

When completed, go in to the user profile service application and manually
recreate your synchronisation connection etc. and run a full sync.
The benefit of this approach is after you're done you should have your user
profile data from production restored into your new environment :)

I also restore the My Site content db from prod as as a seperate step as
well.

If your having dramas creating this, the above probably won't fix any of
your issues :(

Regards,

Sezai Komur
SharePoint Solutions Architect | SharePoint Server MVP
NEC IT Solutions

On Fri, Aug 24, 2012 at 10:55 AM, Marko Salonen <
marko.salo...@moretonbay.qld.gov.au> wrote:

>  10.50.1600.1  so SQL 2008 R2 with no patches
>
> ** **
>
> Regards,
>
> ** **
>
> Marko
>
> ** **
>
> -- 
>
> Marko Salonen
> Senior Applications Analyst
>
> Moreton Bay Regional Council
> 220 Gympie Road, Strathpine Q 4500
> P 07 3480 6531
>
> F 07 5433 2188
>
> www.moretonbay.qld.gov.au
>
> ** **
>
> *From:* ozmoss-boun...@ozmoss.com [mailto:ozmoss-boun...@ozmoss.com] *On
> Behalf Of *Chris Howell
> *Sent:* Friday, 24 August 2012 12:48 PM
> *To:* ozMOSS
> *Subject:* Re: User Profile Service
>
> ** **
>
> Hi Marco,
>
> ** **
>
> What is your patch level on the SQL server?
>
> ** **
>
> From my experience with UPS, all my issues were fixed by a SQL patch.
>
> ** **
>
> Chris
>
> On 24 August 2012 12:20, Marko Salonen <
> marko.salo...@moretonbay.qld.gov.au> wrote:
>
> Hi All
>
>  
>
> Wow, what a week. I have been banging my head against a brick wall with
> this one, and I feel defeated. Not a great introduction to SharePoint for
> my colleagues, and I amazed that this is so difficult. To make myself feel
> a little better I just remember that the leader of Kony 2012 got arrested
> before Kony did! J
>
>  
>
> Today I started from a completely clean environment. Recreated my service
> accounts, and went over the accounts in
> http://www.harbar.net/articles/sp2010ups.aspx step by step with our
> networking guys, and followed the instructions to the letter. Alas to no
> avail. 
>
>  
>
> When others have followed the instructions by Harbar, have you started any
> other services?  If yes, which ones?
>
>  
>
> To recap
>
>  
>
> Win 2008 R2
>
> SharePoint 2010 SP1 July 2012 CU
>
>  
>
> SQL 2008 R2
>
>  
>
> I open the 1433 port
>
> I create an SQL Alias
>
> I set local admin access
>
> I set local login
>
>  
>
> Run Config Wizard (not using the AutoSPInstall)
>
>  
>
> I then follow the Harbar instructions to create the UPS.
>
>  
>
> Regards,
>
>  
>
> Marko
>
>  
>
> -- 
>
> Marko Salonen
> Senior Applications Analyst
>
> Moreton Bay Regional Council
> 220 Gympie Road, Strathpine Q 4500
> P 07 3480 6531
>
> F 07 5433 2188
>
> www.moretonbay.qld.gov.au
>
>  
>
> MORETON BAY REGIONAL COUNCIL (MBRC) PRIVILEGED PRIVATE AND CONFIDENTIAL -
> The information contained in this e-mail and any attachments is
> confidential and may attract legal privilege. It is only intended for the
> named recipient/s. If you are not a named recipient any use of this
> information including copying, distribution and publication is prohibited.
> Confidentiality and legal privilege are not waived or lost as a result of
> mistaken or erroneous delivery. If you are not a named recipient, please
> delete all copies immediately and contact the sender to advise of the error.
> 
>
> It is recommended that you scan this email and any attachment before
> opening. MBRC does not accept any responsibility or liability for loss or
> damage arising directly or indirectly from opening this email, opening any
> attachments or any communication errors.
>
> The views expressed in this email and any attachments are the personal
> views of the sender unless otherwise stated.
>
>
> ___
> ozmoss mailing list
> ozmoss@ozmoss.com
> http://prdlxvm0001.codify.net/mailman/listinfo/ozmoss
>
> ** **
>
>

RE: User Profile Service

[Nigel Hertz]

That's for SQL 2008, Marko is on SQL 2008 R2 I think.

From: ozmoss-boun...@ozmoss.com [mailto:ozmoss-boun...@ozmoss.com] On Behalf Of 
Chris Howell
Sent: Friday, 24 August 2012 1:27 PM
To: ozMOSS
Subject: Re: User Profile Service

The notes I have are that the SQL must be SP1 CU2 (or higher).

From:
http://technet.microsoft.com/en-us/library/ee721049.aspx#prereqs

"You must have a full installation of Microsoft SQL Server, not the Express 
edition. If you are using SQL Server 2008, you must have Service Pack 1 (SP1) 
and Cumulative Update 2 (CU2) "
On 24 August 2012 12:55, Marko Salonen 
mailto:marko.salo...@moretonbay.qld.gov.au>>
 wrote:
10.50.1600.1  so SQL 2008 R2 with no patches

Regards,

Marko

--
Marko Salonen
Senior Applications Analyst
Moreton Bay Regional Council
220 Gympie Road, Strathpine Q 4500
P 07 3480 6531
F 07 5433 2188
www.moretonbay.qld.gov.au

From: ozmoss-boun...@ozmoss.com 
[mailto:ozmoss-boun...@ozmoss.com] On Behalf 
Of Chris Howell
Sent: Friday, 24 August 2012 12:48 PM
To: ozMOSS
Subject: Re: User Profile Service

Hi Marco,

What is your patch level on the SQL server?

>From my experience with UPS, all my issues were fixed by a SQL patch.

Chris
On 24 August 2012 12:20, Marko Salonen 
mailto:marko.salo...@moretonbay.qld.gov.au>>
 wrote:
Hi All

Wow, what a week. I have been banging my head against a brick wall with this 
one, and I feel defeated. Not a great introduction to SharePoint for my 
colleagues, and I amazed that this is so difficult. To make myself feel a 
little better I just remember that the leader of Kony 2012 got arrested before 
Kony did! :)

Today I started from a completely clean environment. Recreated my service 
accounts, and went over the accounts in 
http://www.harbar.net/articles/sp2010ups.aspx step by step with our networking 
guys, and followed the instructions to the letter. Alas to no avail.

When others have followed the instructions by Harbar, have you started any 
other services?  If yes, which ones?

To recap

Win 2008 R2
SharePoint 2010 SP1 July 2012 CU

SQL 2008 R2

I open the 1433 port
I create an SQL Alias
I set local admin access
I set local login

Run Config Wizard (not using the AutoSPInstall)

I then follow the Harbar instructions to create the UPS.

Regards,

Marko

--
Marko Salonen
Senior Applications Analyst
Moreton Bay Regional Council
220 Gympie Road, Strathpine Q 4500
P 07 3480 6531
F 07 5433 2188
www.moretonbay.qld.gov.au


MORETON BAY REGIONAL COUNCIL (MBRC) PRIVILEGED PRIVATE AND CONFIDENTIAL - The 
information contained in this e-mail and any attachments is confidential and 
may attract legal privilege. It is only intended for the named recipient/s. If 
you are not a named recipient any use of this information including copying, 
distribution and publication is prohibited. Confidentiality and legal privilege 
are not waived or lost as a result of mistaken or erroneous delivery. If you 
are not a named recipient, please delete all copies immediately and contact the 
sender to advise of the error.

It is recommended that you scan this email and any attachment before opening. 
MBRC does not accept any responsibility or liability for loss or damage arising 
directly or indirectly from opening this email, opening any attachments or any 
communication errors.

The views expressed in this email and any attachments are the personal views of 
the sender unless otherwise stated.

___
ozmoss mailing list
ozmoss@ozmoss.com
http://prdlxvm0001.codify.net/mailman/listinfo/ozmoss


___
ozmoss mailing list
ozmoss@ozmoss.com
http://prdlxvm0001.codify.net/mailman/listinfo/ozmoss



Stockland Notice: If this communication has been sent to you by mistake, please 
delete and notify us. If it has been sent to you by mistake, legal privilege is 
not waived or lost and you are not entitled to use it in any way. Stockland and 
its subsidiaries reserve the right to monitor e-mail communication through its 
networks.
___
ozmoss mailing list
ozmoss@ozmoss.com
http://prdlxvm0001.codify.net/mailman/listinfo/ozmoss

Re: User Profile Service

[Chris Howell]

The notes I have are that the SQL must be SP1 CU2 (or higher).

From:
http://technet.microsoft.com/en-us/library/ee721049.aspx#prereqs

"You must have a full installation of Microsoft SQL Server, not the Express
edition. If you are using SQL Server 2008, you must have Service Pack 1
(SP1) and Cumulative Update 2 (CU2) "

On 24 August 2012 12:55, Marko Salonen
wrote:

>  10.50.1600.1  so SQL 2008 R2 with no patches
>
> ** **
>
> Regards,
>
> ** **
>
> Marko
>
> ** **
>
> -- 
>
> Marko Salonen
> Senior Applications Analyst
>
> Moreton Bay Regional Council
> 220 Gympie Road, Strathpine Q 4500
> P 07 3480 6531
>
> F 07 5433 2188
>
> www.moretonbay.qld.gov.au
>
> ** **
>
> *From:* ozmoss-boun...@ozmoss.com [mailto:ozmoss-boun...@ozmoss.com] *On
> Behalf Of *Chris Howell
> *Sent:* Friday, 24 August 2012 12:48 PM
> *To:* ozMOSS
> *Subject:* Re: User Profile Service
>
> ** **
>
> Hi Marco,
>
> ** **
>
> What is your patch level on the SQL server?
>
> ** **
>
> From my experience with UPS, all my issues were fixed by a SQL patch.
>
> ** **
>
> Chris
>
> On 24 August 2012 12:20, Marko Salonen <
> marko.salo...@moretonbay.qld.gov.au> wrote:
>
> Hi All
>
>  
>
> Wow, what a week. I have been banging my head against a brick wall with
> this one, and I feel defeated. Not a great introduction to SharePoint for
> my colleagues, and I amazed that this is so difficult. To make myself feel
> a little better I just remember that the leader of Kony 2012 got arrested
> before Kony did! J
>
>  
>
> Today I started from a completely clean environment. Recreated my service
> accounts, and went over the accounts in
> http://www.harbar.net/articles/sp2010ups.aspx step by step with our
> networking guys, and followed the instructions to the letter. Alas to no
> avail. 
>
>  
>
> When others have followed the instructions by Harbar, have you started any
> other services?  If yes, which ones?
>
>  
>
> To recap
>
>  
>
> Win 2008 R2
>
> SharePoint 2010 SP1 July 2012 CU
>
>  
>
> SQL 2008 R2
>
>  
>
> I open the 1433 port
>
> I create an SQL Alias
>
> I set local admin access
>
> I set local login
>
>  
>
> Run Config Wizard (not using the AutoSPInstall)
>
>  
>
> I then follow the Harbar instructions to create the UPS.
>
>  
>
> Regards,
>
>  
>
> Marko
>
>  
>
> -- 
>
> Marko Salonen
> Senior Applications Analyst
>
> Moreton Bay Regional Council
> 220 Gympie Road, Strathpine Q 4500
> P 07 3480 6531
>
> F 07 5433 2188
>
> www.moretonbay.qld.gov.au
>
>  
>
> MORETON BAY REGIONAL COUNCIL (MBRC) PRIVILEGED PRIVATE AND CONFIDENTIAL -
> The information contained in this e-mail and any attachments is
> confidential and may attract legal privilege. It is only intended for the
> named recipient/s. If you are not a named recipient any use of this
> information including copying, distribution and publication is prohibited.
> Confidentiality and legal privilege are not waived or lost as a result of
> mistaken or erroneous delivery. If you are not a named recipient, please
> delete all copies immediately and contact the sender to advise of the error.
> 
>
> It is recommended that you scan this email and any attachment before
> opening. MBRC does not accept any responsibility or liability for loss or
> damage arising directly or indirectly from opening this email, opening any
> attachments or any communication errors.
>
> The views expressed in this email and any attachments are the personal
> views of the sender unless otherwise stated.
>
>
> ___
> ozmoss mailing list
> ozmoss@ozmoss.com
> http://prdlxvm0001.codify.net/mailman/listinfo/ozmoss
>
> ** **
>
> ___
> ozmoss mailing list
> ozmoss@ozmoss.com
> http://prdlxvm0001.codify.net/mailman/listinfo/ozmoss
>
>
___
ozmoss mailing list
ozmoss@ozmoss.com
http://prdlxvm0001.codify.net/mailman/listinfo/ozmoss

RE: Infopath

[Nigel Hertz]

I've experienced that a lot. Sometimes running a full text crawl rectifies it, 
but not always. I've found the easiest way to sort it out is to disable any 
workflows that run when the form is modified, create a dummy column, open the 
library in datasheet view, and then fill the dummy column with a 1 or 
something. That forces it to refresh somehow.

From: ozmoss-boun...@ozmoss.com [mailto:ozmoss-boun...@ozmoss.com] On Behalf Of 
Ajay
Sent: Friday, 24 August 2012 1:10 PM
To: ozMOSS
Subject: Infopath

I have added a field from Info-path form to share-point library as a column.

The new column is blank, to get it when I open and save info-path form the new 
column gets populated in share-point library.

Is there any easy/faster way to populate the new column for existing forms, 
then opening and saving 100's of existing forms






Stockland Notice: If this communication has been sent to you by mistake, please 
delete and notify us. If it has been sent to you by mistake, legal privilege is 
not waived or lost and you are not entitled to use it in any way. Stockland and 
its subsidiaries reserve the right to monitor e-mail communication through its 
networks.
___
ozmoss mailing list
ozmoss@ozmoss.com
http://prdlxvm0001.codify.net/mailman/listinfo/ozmoss

RE: User Profile Service

[Roger Carran]

Have you ensured that the service account has Replicate Directory Changes 
rights within AD?

Kind Regards,


Roger Carran
Sharing Minds
Knowledge | Communication | Collaboration | Productivity
Mobile: 0411 598 110
Web: www.SharingMinds.com.au

Thinking about upgrading your Intranet? Then think Sharing Minds!

From: ozmoss-boun...@ozmoss.com [mailto:ozmoss-boun...@ozmoss.com] On Behalf Of 
Marko Salonen
Sent: Friday, 24 August 2012 12:56 PM
To: ozMOSS
Subject: RE: User Profile Service

10.50.1600.1  so SQL 2008 R2 with no patches

Regards,

Marko

--
Marko Salonen
Senior Applications Analyst
Moreton Bay Regional Council
220 Gympie Road, Strathpine Q 4500
P 07 3480 6531
F 07 5433 2188
www.moretonbay.qld.gov.au

From: ozmoss-boun...@ozmoss.com 
[mailto:ozmoss-boun...@ozmoss.com] 
On Behalf Of Chris Howell
Sent: Friday, 24 August 2012 12:48 PM
To: ozMOSS
Subject: Re: User Profile Service

Hi Marco,

What is your patch level on the SQL server?

>From my experience with UPS, all my issues were fixed by a SQL patch.

Chris
On 24 August 2012 12:20, Marko Salonen 
mailto:marko.salo...@moretonbay.qld.gov.au>>
 wrote:
Hi All

Wow, what a week. I have been banging my head against a brick wall with this 
one, and I feel defeated. Not a great introduction to SharePoint for my 
colleagues, and I amazed that this is so difficult. To make myself feel a 
little better I just remember that the leader of Kony 2012 got arrested before 
Kony did! :)

Today I started from a completely clean environment. Recreated my service 
accounts, and went over the accounts in 
http://www.harbar.net/articles/sp2010ups.aspx step by step with our networking 
guys, and followed the instructions to the letter. Alas to no avail.

When others have followed the instructions by Harbar, have you started any 
other services?  If yes, which ones?

To recap

Win 2008 R2
SharePoint 2010 SP1 July 2012 CU

SQL 2008 R2

I open the 1433 port
I create an SQL Alias
I set local admin access
I set local login

Run Config Wizard (not using the AutoSPInstall)

I then follow the Harbar instructions to create the UPS.

Regards,

Marko

--
Marko Salonen
Senior Applications Analyst
Moreton Bay Regional Council
220 Gympie Road, Strathpine Q 4500
P 07 3480 6531
F 07 5433 2188
www.moretonbay.qld.gov.au


MORETON BAY REGIONAL COUNCIL (MBRC) PRIVILEGED PRIVATE AND CONFIDENTIAL - The 
information contained in this e-mail and any attachments is confidential and 
may attract legal privilege. It is only intended for the named recipient/s. If 
you are not a named recipient any use of this information including copying, 
distribution and publication is prohibited. Confidentiality and legal privilege 
are not waived or lost as a result of mistaken or erroneous delivery. If you 
are not a named recipient, please delete all copies immediately and contact the 
sender to advise of the error.

It is recommended that you scan this email and any attachment before opening. 
MBRC does not accept any responsibility or liability for loss or damage arising 
directly or indirectly from opening this email, opening any attachments or any 
communication errors.

The views expressed in this email and any attachments are the personal views of 
the sender unless otherwise stated.

___
ozmoss mailing list
ozmoss@ozmoss.com
http://prdlxvm0001.codify.net/mailman/listinfo/ozmoss

___
ozmoss mailing list
ozmoss@ozmoss.com
http://prdlxvm0001.codify.net/mailman/listinfo/ozmoss

RE: User Profile Service

[Marko Salonen]

10.50.1600.1  so SQL 2008 R2 with no patches

Regards,

Marko

--
Marko Salonen
Senior Applications Analyst
Moreton Bay Regional Council
220 Gympie Road, Strathpine Q 4500
P 07 3480 6531
F 07 5433 2188
www.moretonbay.qld.gov.au

From: ozmoss-boun...@ozmoss.com [mailto:ozmoss-boun...@ozmoss.com] On Behalf Of 
Chris Howell
Sent: Friday, 24 August 2012 12:48 PM
To: ozMOSS
Subject: Re: User Profile Service

Hi Marco,

What is your patch level on the SQL server?

>From my experience with UPS, all my issues were fixed by a SQL patch.

Chris
On 24 August 2012 12:20, Marko Salonen 
mailto:marko.salo...@moretonbay.qld.gov.au>>
 wrote:
Hi All

Wow, what a week. I have been banging my head against a brick wall with this 
one, and I feel defeated. Not a great introduction to SharePoint for my 
colleagues, and I amazed that this is so difficult. To make myself feel a 
little better I just remember that the leader of Kony 2012 got arrested before 
Kony did! :)

Today I started from a completely clean environment. Recreated my service 
accounts, and went over the accounts in 
http://www.harbar.net/articles/sp2010ups.aspx step by step with our networking 
guys, and followed the instructions to the letter. Alas to no avail.

When others have followed the instructions by Harbar, have you started any 
other services?  If yes, which ones?

To recap

Win 2008 R2
SharePoint 2010 SP1 July 2012 CU

SQL 2008 R2

I open the 1433 port
I create an SQL Alias
I set local admin access
I set local login

Run Config Wizard (not using the AutoSPInstall)

I then follow the Harbar instructions to create the UPS.

Regards,

Marko

--
Marko Salonen
Senior Applications Analyst
Moreton Bay Regional Council
220 Gympie Road, Strathpine Q 4500
P 07 3480 6531
F 07 5433 2188
www.moretonbay.qld.gov.au


MORETON BAY REGIONAL COUNCIL (MBRC) PRIVILEGED PRIVATE AND CONFIDENTIAL - The 
information contained in this e-mail and any attachments is confidential and 
may attract legal privilege. It is only intended for the named recipient/s. If 
you are not a named recipient any use of this information including copying, 
distribution and publication is prohibited. Confidentiality and legal privilege 
are not waived or lost as a result of mistaken or erroneous delivery. If you 
are not a named recipient, please delete all copies immediately and contact the 
sender to advise of the error.

It is recommended that you scan this email and any attachment before opening. 
MBRC does not accept any responsibility or liability for loss or damage arising 
directly or indirectly from opening this email, opening any attachments or any 
communication errors.

The views expressed in this email and any attachments are the personal views of 
the sender unless otherwise stated.

___
ozmoss mailing list
ozmoss@ozmoss.com
http://prdlxvm0001.codify.net/mailman/listinfo/ozmoss

___
ozmoss mailing list
ozmoss@ozmoss.com
http://prdlxvm0001.codify.net/mailman/listinfo/ozmoss

Re: User Profile Service

[Chris Howell]

Hi Marco,

What is your patch level on the SQL server?

>From my experience with UPS, all my issues were fixed by a SQL patch.

Chris

On 24 August 2012 12:20, Marko Salonen
wrote:

>  Hi All
>
> ** **
>
> Wow, what a week. I have been banging my head against a brick wall with
> this one, and I feel defeated. Not a great introduction to SharePoint for
> my colleagues, and I amazed that this is so difficult. To make myself feel
> a little better I just remember that the leader of Kony 2012 got arrested
> before Kony did! J
>
> ** **
>
> Today I started from a completely clean environment. Recreated my service
> accounts, and went over the accounts in
> http://www.harbar.net/articles/sp2010ups.aspx step by step with our
> networking guys, and followed the instructions to the letter. Alas to no
> avail. 
>
> ** **
>
> When others have followed the instructions by Harbar, have you started any
> other services?  If yes, which ones?
>
> ** **
>
> To recap
>
> ** **
>
> Win 2008 R2
>
> SharePoint 2010 SP1 July 2012 CU
>
> ** **
>
> SQL 2008 R2
>
> ** **
>
> I open the 1433 port
>
> I create an SQL Alias
>
> I set local admin access
>
> I set local login
>
> ** **
>
> Run Config Wizard (not using the AutoSPInstall)
>
> ** **
>
> I then follow the Harbar instructions to create the UPS.
>
> ** **
>
> Regards,
>
> ** **
>
> Marko
>
> ** **
>
> -- 
>
> Marko Salonen
> Senior Applications Analyst
>
> Moreton Bay Regional Council
> 220 Gympie Road, Strathpine Q 4500
> P 07 3480 6531
>
> F 07 5433 2188
>
> www.moretonbay.qld.gov.au
>
> ** **
>
> MORETON BAY REGIONAL COUNCIL (MBRC) PRIVILEGED PRIVATE AND CONFIDENTIAL -
> The information contained in this e-mail and any attachments is
> confidential and may attract legal privilege. It is only intended for the
> named recipient/s. If you are not a named recipient any use of this
> information including copying, distribution and publication is prohibited.
> Confidentiality and legal privilege are not waived or lost as a result of
> mistaken or erroneous delivery. If you are not a named recipient, please
> delete all copies immediately and contact the sender to advise of the error.
>
> It is recommended that you scan this email and any attachment before
> opening. MBRC does not accept any responsibility or liability for loss or
> damage arising directly or indirectly from opening this email, opening any
> attachments or any communication errors.
>
> The views expressed in this email and any attachments are the personal
> views of the sender unless otherwise stated.
>
> ___
> ozmoss mailing list
> ozmoss@ozmoss.com
> http://prdlxvm0001.codify.net/mailman/listinfo/ozmoss
>
>
___
ozmoss mailing list
ozmoss@ozmoss.com
http://prdlxvm0001.codify.net/mailman/listinfo/ozmoss

RE: User Profile Service

[Marko Salonen]

Hi Ivan

NetBios and FQDN are the same. I am using an alias for the database server, and 
I have opened port 1433. Trying to rerun SCW now to see if that helps but I 
don't have high hopes.

Regards,

Marko

--
Marko Salonen
Senior Applications Analyst
Moreton Bay Regional Council
220 Gympie Road, Strathpine Q 4500
P 07 3480 6531
F 07 5433 2188
www.moretonbay.qld.gov.au

From: ozmoss-boun...@ozmoss.com [mailto:ozmoss-boun...@ozmoss.com] On Behalf Of 
Ivan Wilson
Sent: Friday, 24 August 2012 12:36 PM
To: ozMOSS
Subject: RE: User Profile Service

Hi Marko

Is your domain's NETBIOS name different to its Fully Qualified Domain Name 
(FQDN)? This can add extra complexity with configuration.

On a SQL Server perspective, are you using a named instance of SQL or the 
default instance? If you are using a named instance then you may have to open 
additional ports. Search for "How to configure sql server to listen on a 
specific port" for more details.

I recently had a challenge with configuring User Profiles because the GAC 
didn't have the correct version of an assembly. I reran the configuration 
wizard and then restarted the user profile sync service to solve this one.

Hth

Ivan

From: ozmoss-boun...@ozmoss.com [mailto:ozmoss-boun...@ozmoss.com] On Behalf Of 
Marko Salonen
Sent: Friday, 24 August 2012 12:21 PM
To: ozMOSS (ozmoss@ozmoss.com)
Subject: User Profile Service

Hi All

Wow, what a week. I have been banging my head against a brick wall with this 
one, and I feel defeated. Not a great introduction to SharePoint for my 
colleagues, and I amazed that this is so difficult. To make myself feel a 
little better I just remember that the leader of Kony 2012 got arrested before 
Kony did! :)

Today I started from a completely clean environment. Recreated my service 
accounts, and went over the accounts in 
http://www.harbar.net/articles/sp2010ups.aspx step by step with our networking 
guys, and followed the instructions to the letter. Alas to no avail.

When others have followed the instructions by Harbar, have you started any 
other services?  If yes, which ones?

To recap

Win 2008 R2
SharePoint 2010 SP1 July 2012 CU

SQL 2008 R2

I open the 1433 port
I create an SQL Alias
I set local admin access
I set local login

Run Config Wizard (not using the AutoSPInstall)

I then follow the Harbar instructions to create the UPS.

Regards,

Marko

--
Marko Salonen
Senior Applications Analyst
Moreton Bay Regional Council
220 Gympie Road, Strathpine Q 4500
P 07 3480 6531
F 07 5433 2188
www.moretonbay.qld.gov.au


MORETON BAY REGIONAL COUNCIL (MBRC) PRIVILEGED PRIVATE AND CONFIDENTIAL - The 
information contained in this e-mail and any attachments is confidential and 
may attract legal privilege. It is only intended for the named recipient/s. If 
you are not a named recipient any use of this information including copying, 
distribution and publication is prohibited. Confidentiality and legal privilege 
are not waived or lost as a result of mistaken or erroneous delivery. If you 
are not a named recipient, please delete all copies immediately and contact the 
sender to advise of the error.

It is recommended that you scan this email and any attachment before opening. 
MBRC does not accept any responsibility or liability for loss or damage arising 
directly or indirectly from opening this email, opening any attachments or any 
communication errors.

The views expressed in this email and any attachments are the personal views of 
the sender unless otherwise stated.
___
ozmoss mailing list
ozmoss@ozmoss.com
http://prdlxvm0001.codify.net/mailman/listinfo/ozmoss

RE: User Profile Service

[Ivan Wilson]

Hi Marko

Is your domain's NETBIOS name different to its Fully Qualified Domain Name 
(FQDN)? This can add extra complexity with configuration.

On a SQL Server perspective, are you using a named instance of SQL or the 
default instance? If you are using a named instance then you may have to open 
additional ports. Search for "How to configure sql server to listen on a 
specific port" for more details.

I recently had a challenge with configuring User Profiles because the GAC 
didn't have the correct version of an assembly. I reran the configuration 
wizard and then restarted the user profile sync service to solve this one.

Hth

Ivan

From: ozmoss-boun...@ozmoss.com [mailto:ozmoss-boun...@ozmoss.com] On Behalf Of 
Marko Salonen
Sent: Friday, 24 August 2012 12:21 PM
To: ozMOSS (ozmoss@ozmoss.com)
Subject: User Profile Service

Hi All

Wow, what a week. I have been banging my head against a brick wall with this 
one, and I feel defeated. Not a great introduction to SharePoint for my 
colleagues, and I amazed that this is so difficult. To make myself feel a 
little better I just remember that the leader of Kony 2012 got arrested before 
Kony did! :)

Today I started from a completely clean environment. Recreated my service 
accounts, and went over the accounts in 
http://www.harbar.net/articles/sp2010ups.aspx step by step with our networking 
guys, and followed the instructions to the letter. Alas to no avail.

When others have followed the instructions by Harbar, have you started any 
other services?  If yes, which ones?

To recap

Win 2008 R2
SharePoint 2010 SP1 July 2012 CU

SQL 2008 R2

I open the 1433 port
I create an SQL Alias
I set local admin access
I set local login

Run Config Wizard (not using the AutoSPInstall)

I then follow the Harbar instructions to create the UPS.

Regards,

Marko

--
Marko Salonen
Senior Applications Analyst
Moreton Bay Regional Council
220 Gympie Road, Strathpine Q 4500
P 07 3480 6531
F 07 5433 2188
www.moretonbay.qld.gov.au


MORETON BAY REGIONAL COUNCIL (MBRC) PRIVILEGED PRIVATE AND CONFIDENTIAL - The 
information contained in this e-mail and any attachments is confidential and 
may attract legal privilege. It is only intended for the named recipient/s. If 
you are not a named recipient any use of this information including copying, 
distribution and publication is prohibited. Confidentiality and legal privilege 
are not waived or lost as a result of mistaken or erroneous delivery. If you 
are not a named recipient, please delete all copies immediately and contact the 
sender to advise of the error.

It is recommended that you scan this email and any attachment before opening. 
MBRC does not accept any responsibility or liability for loss or damage arising 
directly or indirectly from opening this email, opening any attachments or any 
communication errors.

The views expressed in this email and any attachments are the personal views of 
the sender unless otherwise stated.
___
ozmoss mailing list
ozmoss@ozmoss.com
http://prdlxvm0001.codify.net/mailman/listinfo/ozmoss

User Profile Service

[Marko Salonen]

Hi All

Wow, what a week. I have been banging my head against a brick wall with this 
one, and I feel defeated. Not a great introduction to SharePoint for my 
colleagues, and I amazed that this is so difficult. To make myself feel a 
little better I just remember that the leader of Kony 2012 got arrested before 
Kony did! :)

Today I started from a completely clean environment. Recreated my service 
accounts, and went over the accounts in 
http://www.harbar.net/articles/sp2010ups.aspx step by step with our networking 
guys, and followed the instructions to the letter. Alas to no avail.

When others have followed the instructions by Harbar, have you started any 
other services?  If yes, which ones?

To recap

Win 2008 R2
SharePoint 2010 SP1 July 2012 CU

SQL 2008 R2

I open the 1433 port
I create an SQL Alias
I set local admin access
I set local login

Run Config Wizard (not using the AutoSPInstall)

I then follow the Harbar instructions to create the UPS.

Regards,

Marko

--
Marko Salonen
Senior Applications Analyst
Moreton Bay Regional Council
220 Gympie Road, Strathpine Q 4500
P 07 3480 6531
F 07 5433 2188
www.moretonbay.qld.gov.au


MORETON BAY REGIONAL COUNCIL (MBRC) PRIVILEGED PRIVATE AND CONFIDENTIAL - The 
information contained in this e-mail and any attachments is confidential and 
may attract legal privilege. It is only intended for the named recipient/s. If 
you are not a named recipient any use of this information including copying, 
distribution and publication is prohibited. Confidentiality and legal privilege 
are not waived or lost as a result of mistaken or erroneous delivery. If you 
are not a named recipient, please delete all copies immediately and contact the 
sender to advise of the error.

It is recommended that you scan this email and any attachment before opening. 
MBRC does not accept any responsibility or liability for loss or damage arising 
directly or indirectly from opening this email, opening any attachments or any 
communication errors.

The views expressed in this email and any attachments are the personal views of 
the sender unless otherwise stated.
___
ozmoss mailing list
ozmoss@ozmoss.com
http://prdlxvm0001.codify.net/mailman/listinfo/ozmoss

Re: ForeFron Identity error after installing using AutoSPInstaller

[Web Admin]

If anyone ever gets this sorted out please let me know. I still have only 5
profiles imported despite selecting our AD root.

And when attempting to create Audiences, the *Select Security Group or
Distribution List* is displaying SharePoint webs!!

[image: Inline images 1]

On 23 August 2012 23:41, Prashanth Thiyagalingam
wrote:

>  These are related services/service applications and they are not
> mandatory for the creation of UPS, they are required if you want make use
> of the full social computing features of SharePoint 2010.
> http://technet.microsoft.com/en-us/library/ee662538.aspx#related
>
> For debugging UP Synchronisation issues I found FIM Synchronisation
> Service Manager tool very useful, its in
> *C:\Program Files\Microsoft Office Servers\14.0\Synchronization
> Service\UIShell\miisclient.exe *
> **
> --
> From: akhanna...@gmail.com
> Date: Thu, 23 Aug 2012 20:31:42 +1200
>
> Subject: Re: ForeFron Identity error after installing using AutoSPInstaller
> To: ozmoss@ozmoss.com
>
>
> User Profile Services is dependent on
>
> - BCS
> - Managed metadata services
> - Subscription settings services
>
>
>
> On Thu, Aug 23, 2012 at 8:20 PM, Marko Salonen <
> marko.salo...@moretonbay.qld.gov.au> wrote:
>
>  Hi
>
> ** **
>
> I have followed that to the letter, and I still get the unexpected error
> when trying manage the UPS.
>
> ** **
>
> What I am doing now is manually configuring all the service (a good
> learning exercise I suppose) and I was wondering if anyone happens to have
> a list of services that should be running before I try to configure the UPS?
> 
>
> ** **
>
> Cheers guys!
>
> ** **
>
> Regards,
>
> ** **
>
> Marko
>
> ** **
>
> ** **
>
> *From:* ozmoss-boun...@ozmoss.com [mailto:ozmoss-boun...@ozmoss.com] *On
> Behalf Of *Ajay
> *Sent:* Tuesday, 21 August 2012 12:27 PM
> *To:* ozMOSS
> *Subject:* Re: ForeFron Identity error after installing using
> AutoSPInstaller
>
> ** **
>
> I have not seen this before.. but setting the profile service is a pain.**
> **
>
> I was able to successfully get the service and sync running on SharePoint
> 2013 using the following highly recommended article.
>
> ** **
>
> http://www.harbar.net/articles/sp2010ups.aspx 
>
> ** **
>
> And yes ensure to be patches noted below..
>
> ** **
>
> ** **
>
> On Tue, Aug 21, 2012 at 2:24 PM, Sezai Komur 
> wrote:
>
> Marko,
>
>  
>
> Have a detailed read of the following and compare to how you're setting
> this up:
>
> http://technet.microsoft.com/en-us/library/ee721049.aspx
>
> http://www.harbar.net/articles/sp2010ups.aspx
>
> http://www.harbar.net/articles/sp2010ups2.aspx
>
> There's a lot of fixes on this post SP1 + June 2011 CU refresh, ensure
> you're patched up well, try a more recent CU.
>
>  
>
> Regards,
>
>  
>
> Sezai.
>
> On Tue, Aug 21, 2012 at 10:06 AM, Marko Salonen <
> marko.salo...@moretonbay.qld.gov.au> wrote:
>
>   Hi
>
>  
>
> I am still trying get the User Profile Service to run after using
> AutoSPInstaller.
>
> 
>
> *The Forefront Identity Manager Service cannot connect to the SQL
> Database Server. The SQL Server could not be contacted. The connection
> failure may be due to a network failure, firewall misconfiguration, or
> other connection issue. Additionally, the SQL Server connection information
> could be configured incorrectly. Verify that the SQL Server is reachable
> from the Forefront Identity Manager Service computer. Ensure that SQL
> Server is running, that the network connection is active, and that the
> firewall is configured properly. Last, verify the connection information
> has been configured properly. This configuration is stored in the Windows
> Registry.*
>
>  
>
> I have opened 1433 port for SQL. 
>
>  
>
> I have created an ODBC connection with the account in question to verify
> access.
>
>  
>
> The Account complies with
>
> - It must have domain user account permissions.
>
> - It must be a member of the local administrators group on each server in
> the SharePoint Server 2010 farm, excluding SQL Server and the Simple Mail
> Transfer Protocol (SMTP) server.
>
> - This account must have access to the SharePoint Server 2010 databases.**
> **
>
> - If you use any Windows PowerShell operations that affect a database, the
> setup user administrator account must be a member of the db_owner role.***
> *
>
> - This account must be assigned to the securityadmin and dbcreator SQL
> Server security roles during setup and configuration.
>
>  
>
> For the life of me I can’t figure out why this worked using the Wizard to
> install but not when using AutoSPInstaller.
>
>  
>
>  
>
>  
>  MORETON BAY REGIONAL COUNCIL (MBRC) PRIVILEGED PRIVATE AND CONFIDENTIAL
> - The information contained in this e-mail and any attachments is
> confidential and may attract legal privilege. 

RE: ForeFron Identity error after installing using AutoSPInstaller

[Prashanth Thiyagalingam]

These are related services/service applications and they are not mandatory for 
the creation of UPS, they are required if you want make use of the full social 
computing features of SharePoint 
2010.http://technet.microsoft.com/en-us/library/ee662538.aspx#related
 For debugging UP Synchronisation issues I found FIM Synchronisation Service 
Manager tool very useful, its inC:\Program Files\Microsoft Office 
Servers\14.0\Synchronization Service\UIShell\miisclient.exe  From: 
akhanna...@gmail.com
Date: Thu, 23 Aug 2012 20:31:42 +1200
Subject: Re: ForeFron Identity error after installing using AutoSPInstaller
To: ozmoss@ozmoss.com

User Profile Services is dependent on

- BCS
- Managed metadata services
- Subscription settings services



On Thu, Aug 23, 2012 at 8:20 PM, Marko Salonen 
 wrote:










Hi
 
I have followed that to the letter, and I still get the unexpected error when 
trying manage the UPS.


 
What I am doing now is manually configuring all the service (a good learning 
exercise I suppose) and I was wondering if anyone happens to have a list of 
services
 that should be running before I try to configure the UPS?
 
Cheers guys!
 
Regards,
 
Marko
 
 
From: ozmoss-boun...@ozmoss.com [mailto:ozmoss-boun...@ozmoss.com]
On Behalf Of Ajay

Sent: Tuesday, 21 August 2012 12:27 PM

To: ozMOSS

Subject: Re: ForeFron Identity error after installing using AutoSPInstaller
 
I have not seen this before.. but setting the profile service is a pain.

I was able to successfully get the service and sync running on SharePoint 2013 
using the following highly recommended article.


 


http://www.harbar.net/articles/sp2010ups.aspx 


 


And yes ensure to be patches noted below..


 

 

On Tue, Aug 21, 2012 at 2:24 PM, Sezai Komur  wrote:

Marko,


 


Have a detailed read of the following and compare to how you're setting this up:


http://technet.microsoft.com/en-us/library/ee721049.aspx


http://www.harbar.net/articles/sp2010ups.aspx


http://www.harbar.net/articles/sp2010ups2.aspx


There's a lot of fixes on this post SP1 + June 2011 CU refresh, ensure you're 
patched up well, try a more recent CU.


 


Regards,


 


Sezai.




On Tue, Aug 21, 2012 at 10:06 AM, Marko Salonen 
 wrote:







Hi
 
I am still trying get the User Profile Service to run after using 
AutoSPInstaller.
   


The Forefront Identity Manager Service cannot connect to the SQL Database 
Server. The SQL Server could not be contacted. The connection failure may be 
due to a network failure, firewall misconfiguration,
 or other connection issue. Additionally, the SQL Server connection information 
could be configured incorrectly. Verify that the SQL Server is reachable from 
the Forefront Identity Manager Service computer. Ensure that SQL Server is 
running, that the network
 connection is active, and that the firewall is configured properly. Last, 
verify the connection information has been configured properly. This 
configuration is stored in the Windows Registry.


 
I have opened 1433 port for SQL.

 
I have created an ODBC connection with the account in question to verify access.
 
The Account complies with
   
- It must have domain user account permissions.

- It must be a member of the local administrators group on each server in the 
SharePoint Server 2010 farm, excluding SQL Server and the Simple Mail Transfer 
Protocol (SMTP) server.



- This account must have access to the SharePoint Server 2010 databases.

- If you use any Windows PowerShell operations that affect a database, the 
setup user administrator account must be a member of the db_owner role.



- This account must be assigned to the securityadmin and dbcreator SQL Server 
security roles during setup and configuration.


 
For the life of me I can’t figure out why this worked using the Wizard to 
install but not when using AutoSPInstaller.


 
 
 

MORETON BAY REGIONAL COUNCIL (MBRC) PRIVILEGED PRIVATE AND CONFIDENTIAL - The 
information contained in this e-mail and any attachments is confidential and 
may attract legal privilege. It is
 only intended for the named recipient/s. If you are not a named recipient any 
use of this information including copying, distribution and publication is 
prohibited. Confidentiality and legal privilege are not waived or lost as a 
result of mistaken or erroneous
 delivery. If you are not a named recipient, please delete all copies 
immediately and contact the sender to advise of the error.
It is recommended that you scan this email and any attachment before opening. 
MBRC does not accept any responsibility or liability for loss or damage arising 
directly or indirectly from opening
 this email, opening any attachments or any communication errors.
The views expressed in this email and any attachments are the personal views of 
the sender unless otherwise stated.



 


___

ozmoss mailing list

ozmoss@ozmoss.com

http://prdlxvm0001.codify.net/mailman/listinfo/ozmoss






_

Re: ForeFron Identity error after installing using AutoSPInstaller

[Maxine Harwood]

If you get this working, please share the  solution... Ups drives me mad and I 
still don't have mine running perfectly!

Ya
Max. 

Sent from Max's iPhone 

On 23/08/2012, at 6:20 PM, Marko Salonen  
wrote:

> Hi
>  
> I have followed that to the letter, and I still get the unexpected error when 
> trying manage the UPS.
>  
> What I am doing now is manually configuring all the service (a good learning 
> exercise I suppose) and I was wondering if anyone happens to have a list of 
> services that should be running before I try to configure the UPS?
>  
> Cheers guys!
>  
> Regards,
>  
> Marko
>  
>  
> From: ozmoss-boun...@ozmoss.com [mailto:ozmoss-boun...@ozmoss.com] On Behalf 
> Of Ajay
> Sent: Tuesday, 21 August 2012 12:27 PM
> To: ozMOSS
> Subject: Re: ForeFron Identity error after installing using AutoSPInstaller
>  
> I have not seen this before.. but setting the profile service is a pain.
> I was able to successfully get the service and sync running on SharePoint 
> 2013 using the following highly recommended article.
>  
> http://www.harbar.net/articles/sp2010ups.aspx 
>  
> And yes ensure to be patches noted below..
>  
>  
> 
> On Tue, Aug 21, 2012 at 2:24 PM, Sezai Komur  
> wrote:
> Marko,
>  
> Have a detailed read of the following and compare to how you're setting this 
> up:
> http://technet.microsoft.com/en-us/library/ee721049.aspx
> http://www.harbar.net/articles/sp2010ups.aspx
> http://www.harbar.net/articles/sp2010ups2.aspx
> There's a lot of fixes on this post SP1 + June 2011 CU refresh, ensure you're 
> patched up well, try a more recent CU.
>  
> Regards,
>  
> Sezai.
> On Tue, Aug 21, 2012 at 10:06 AM, Marko Salonen 
>  wrote:
> Hi
>  
> I am still trying get the User Profile Service to run after using 
> AutoSPInstaller.
>
> The Forefront Identity Manager Service cannot connect to the SQL Database 
> Server. The SQL Server could not be contacted. The connection failure may be 
> due to a network failure, firewall misconfiguration, or other connection 
> issue. Additionally, the SQL Server connection information could be 
> configured incorrectly. Verify that the SQL Server is reachable from the 
> Forefront Identity Manager Service computer. Ensure that SQL Server is 
> running, that the network connection is active, and that the firewall is 
> configured properly. Last, verify the connection information has been 
> configured properly. This configuration is stored in the Windows Registry.
>  
> I have opened 1433 port for SQL.
>  
> I have created an ODBC connection with the account in question to verify 
> access.
>  
> The Account complies with
> - It must have domain user account permissions.
> - It must be a member of the local administrators group on each server in the 
> SharePoint Server 2010 farm, excluding SQL Server and the Simple Mail 
> Transfer Protocol (SMTP) server.
> - This account must have access to the SharePoint Server 2010 databases.
> - If you use any Windows PowerShell operations that affect a database, the 
> setup user administrator account must be a member of the db_owner role.
> - This account must be assigned to the securityadmin and dbcreator SQL Server 
> security roles during setup and configuration.
>  
> For the life of me I can’t figure out why this worked using the Wizard to 
> install but not when using AutoSPInstaller.
>  
>  
>  
> MORETON BAY REGIONAL COUNCIL (MBRC) PRIVILEGED PRIVATE AND CONFIDENTIAL - The 
> information contained in this e-mail and any attachments is confidential and 
> may attract legal privilege. It is only intended for the named recipient/s. 
> If you are not a named recipient any use of this information including 
> copying, distribution and publication is prohibited. Confidentiality and 
> legal privilege are not waived or lost as a result of mistaken or erroneous 
> delivery. If you are not a named recipient, please delete all copies 
> immediately and contact the sender to advise of the error.
> 
> It is recommended that you scan this email and any attachment before opening. 
> MBRC does not accept any responsibility or liability for loss or damage 
> arising directly or indirectly from opening this email, opening any 
> attachments or any communication errors.
> 
> The views expressed in this email and any attachments are the personal views 
> of the sender unless otherwise stated.
> 
>  
> ___
> ozmoss mailing list
> ozmoss@ozmoss.com
> http://prdlxvm0001.codify.net/mailman/listinfo/ozmoss
> 
> 
> 
> ___
> ozmoss mailing list
> ozmoss@ozmoss.com
> http://prdlxvm0001.codify.net/mailman/listinfo/ozmoss
> 
>  
> ___
> ozmoss mailing list
> ozmoss@ozmoss.com
> http://prdlxvm0001.codify.net/mailman/listinfo/ozmoss
___
ozmoss mailing list
ozmoss@ozmoss.com
http://prdlxvm0001.codify.net/mailman/listinfo/ozmoss

Re: ForeFron Identity error after installing using AutoSPInstaller

[Ajay]

User Profile Services is dependent on

- BCS
- Managed metadata services
- Subscription settings services



On Thu, Aug 23, 2012 at 8:20 PM, Marko Salonen <
marko.salo...@moretonbay.qld.gov.au> wrote:

>  Hi
>
> ** **
>
> I have followed that to the letter, and I still get the unexpected error
> when trying manage the UPS.
>
> ** **
>
> What I am doing now is manually configuring all the service (a good
> learning exercise I suppose) and I was wondering if anyone happens to have
> a list of services that should be running before I try to configure the UPS?
> 
>
> ** **
>
> Cheers guys!
>
> ** **
>
> Regards,
>
> ** **
>
> Marko
>
> ** **
>
> ** **
>
> *From:* ozmoss-boun...@ozmoss.com [mailto:ozmoss-boun...@ozmoss.com] *On
> Behalf Of *Ajay
> *Sent:* Tuesday, 21 August 2012 12:27 PM
> *To:* ozMOSS
> *Subject:* Re: ForeFron Identity error after installing using
> AutoSPInstaller
>
> ** **
>
> I have not seen this before.. but setting the profile service is a pain.**
> **
>
> I was able to successfully get the service and sync running on SharePoint
> 2013 using the following highly recommended article.
>
> ** **
>
> http://www.harbar.net/articles/sp2010ups.aspx 
>
> ** **
>
> And yes ensure to be patches noted below..
>
> ** **
>
> ** **
>
> On Tue, Aug 21, 2012 at 2:24 PM, Sezai Komur 
> wrote:
>
> Marko,
>
>  
>
> Have a detailed read of the following and compare to how you're setting
> this up:
>
> http://technet.microsoft.com/en-us/library/ee721049.aspx
>
> http://www.harbar.net/articles/sp2010ups.aspx
>
> http://www.harbar.net/articles/sp2010ups2.aspx
>
> There's a lot of fixes on this post SP1 + June 2011 CU refresh, ensure
> you're patched up well, try a more recent CU.
>
>  
>
> Regards,
>
>  
>
> Sezai.
>
> On Tue, Aug 21, 2012 at 10:06 AM, Marko Salonen <
> marko.salo...@moretonbay.qld.gov.au> wrote:
>
>   Hi
>
>  
>
> I am still trying get the User Profile Service to run after using
> AutoSPInstaller.
>
> 
>
> *The Forefront Identity Manager Service cannot connect to the SQL
> Database Server. The SQL Server could not be contacted. The connection
> failure may be due to a network failure, firewall misconfiguration, or
> other connection issue. Additionally, the SQL Server connection information
> could be configured incorrectly. Verify that the SQL Server is reachable
> from the Forefront Identity Manager Service computer. Ensure that SQL
> Server is running, that the network connection is active, and that the
> firewall is configured properly. Last, verify the connection information
> has been configured properly. This configuration is stored in the Windows
> Registry.*
>
>  
>
> I have opened 1433 port for SQL. 
>
>  
>
> I have created an ODBC connection with the account in question to verify
> access.
>
>  
>
> The Account complies with
>
> - It must have domain user account permissions.
>
> - It must be a member of the local administrators group on each server in
> the SharePoint Server 2010 farm, excluding SQL Server and the Simple Mail
> Transfer Protocol (SMTP) server.
>
> - This account must have access to the SharePoint Server 2010 databases.**
> **
>
> - If you use any Windows PowerShell operations that affect a database, the
> setup user administrator account must be a member of the db_owner role.***
> *
>
> - This account must be assigned to the securityadmin and dbcreator SQL
> Server security roles during setup and configuration.
>
>  
>
> For the life of me I can’t figure out why this worked using the Wizard to
> install but not when using AutoSPInstaller.
>
>  
>
>  
>
>  
>
> MORETON BAY REGIONAL COUNCIL (MBRC) PRIVILEGED PRIVATE AND CONFIDENTIAL -
> The information contained in this e-mail and any attachments is
> confidential and may attract legal privilege. It is only intended for the
> named recipient/s. If you are not a named recipient any use of this
> information including copying, distribution and publication is prohibited.
> Confidentiality and legal privilege are not waived or lost as a result of
> mistaken or erroneous delivery. If you are not a named recipient, please
> delete all copies immediately and contact the sender to advise of the error.
> 
>
> It is recommended that you scan this email and any attachment before
> opening. MBRC does not accept any responsibility or liability for loss or
> damage arising directly or indirectly from opening this email, opening any
> attachments or any communication errors.
>
> The views expressed in this email and any attachments are the personal
> views of the sender unless otherwise stated.
>
> ** **
>
> ___
> ozmoss mailing list
> ozmoss@ozmoss.com
> http://prdlxvm0001.codify.net/mailman/listinfo/ozmoss
>
>
>
> ___
> ozmoss mailing li

RE: ForeFron Identity error after installing using AutoSPInstaller

[Marko Salonen]

Hi

I have followed that to the letter, and I still get the unexpected error when 
trying manage the UPS.

What I am doing now is manually configuring all the service (a good learning 
exercise I suppose) and I was wondering if anyone happens to have a list of 
services that should be running before I try to configure the UPS?

Cheers guys!

Regards,

Marko


From: ozmoss-boun...@ozmoss.com [mailto:ozmoss-boun...@ozmoss.com] On Behalf Of 
Ajay
Sent: Tuesday, 21 August 2012 12:27 PM
To: ozMOSS
Subject: Re: ForeFron Identity error after installing using AutoSPInstaller

I have not seen this before.. but setting the profile service is a pain.
I was able to successfully get the service and sync running on SharePoint 2013 
using the following highly recommended article.

http://www.harbar.net/articles/sp2010ups.aspx

And yes ensure to be patches noted below..


On Tue, Aug 21, 2012 at 2:24 PM, Sezai Komur 
mailto:sharepointse...@gmail.com>> wrote:
Marko,

Have a detailed read of the following and compare to how you're setting this up:
http://technet.microsoft.com/en-us/library/ee721049.aspx
http://www.harbar.net/articles/sp2010ups.aspx
http://www.harbar.net/articles/sp2010ups2.aspx
There's a lot of fixes on this post SP1 + June 2011 CU refresh, ensure you're 
patched up well, try a more recent CU.

Regards,

Sezai.
On Tue, Aug 21, 2012 at 10:06 AM, Marko Salonen 
mailto:marko.salo...@moretonbay.qld.gov.au>>
 wrote:
Hi

I am still trying get the User Profile Service to run after using 
AutoSPInstaller.

The Forefront Identity Manager Service cannot connect to the SQL Database 
Server. The SQL Server could not be contacted. The connection failure may be 
due to a network failure, firewall misconfiguration, or other connection issue. 
Additionally, the SQL Server connection information could be configured 
incorrectly. Verify that the SQL Server is reachable from the Forefront 
Identity Manager Service computer. Ensure that SQL Server is running, that the 
network connection is active, and that the firewall is configured properly. 
Last, verify the connection information has been configured properly. This 
configuration is stored in the Windows Registry.

I have opened 1433 port for SQL.

I have created an ODBC connection with the account in question to verify access.

The Account complies with
- It must have domain user account permissions.
- It must be a member of the local administrators group on each server in the 
SharePoint Server 2010 farm, excluding SQL Server and the Simple Mail Transfer 
Protocol (SMTP) server.
- This account must have access to the SharePoint Server 2010 databases.
- If you use any Windows PowerShell operations that affect a database, the 
setup user administrator account must be a member of the db_owner role.
- This account must be assigned to the securityadmin and dbcreator SQL Server 
security roles during setup and configuration.

For the life of me I can't figure out why this worked using the Wizard to 
install but not when using AutoSPInstaller.




MORETON BAY REGIONAL COUNCIL (MBRC) PRIVILEGED PRIVATE AND CONFIDENTIAL - The 
information contained in this e-mail and any attachments is confidential and 
may attract legal privilege. It is only intended for the named recipient/s. If 
you are not a named recipient any use of this information including copying, 
distribution and publication is prohibited. Confidentiality and legal privilege 
are not waived or lost as a result of mistaken or erroneous delivery. If you 
are not a named recipient, please delete all copies immediately and contact the 
sender to advise of the error.

It is recommended that you scan this email and any attachment before opening. 
MBRC does not accept any responsibility or liability for loss or damage arising 
directly or indirectly from opening this email, opening any attachments or any 
communication errors.

The views expressed in this email and any attachments are the personal views of 
the sender unless otherwise stated.

___
ozmoss mailing list
ozmoss@ozmoss.com
http://prdlxvm0001.codify.net/mailman/listinfo/ozmoss


___
ozmoss mailing list
ozmoss@ozmoss.com
http://prdlxvm0001.codify.net/mailman/listinfo/ozmoss

___
ozmoss mailing list
ozmoss@ozmoss.com
http://prdlxvm0001.codify.net/mailman/listinfo/ozmoss