Re: More on cleaning slides/negatives
What has worked well for me, to remove dust from the slide - I simply use a bulb blower on the slide before it is scanned, I hold the slide horizontally and blow on the bottom and the flip the slide over and do the other side. I do a bunch at a time and then store the slides in plastic slide boxes that are also blown clean with the bulb blower. Most of the time this gets rid of all the dust specs. My scans are still inspected @ 100% to check for spots, but this has almost eliminated the need for using the rubber stamp tool. My slides are scanned by a comercial outfit. It sounds like your problem may also be with the scanner. Ken Waller - Original Message - From: Frits J. Wüthrich <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Sunday, December 30, 2001 6:46 PM Subject: RE: More on cleaning slides/negatives Christian Skofteland asked: > Ok, I know we've covered this in the past but I'm going to ask again (and > pay attention to the answers this time!): > > How the #$!%&*(^*%$ do you get all the dust off your slides or negatives > before you scan them? > > I've been trying to catch up on scanning slides with my new/used HP > PhotoSmart scanner. I've been using compressed air and anti-static wipes > on both the slides and the scanner itself but I'm still > frustrated with all > the crap that shows up on the final scan. > > Any help is greatly appreciated. Thanks in advance. > > Christian Skofteland > [EMAIL PROTECTED] - This message is from the Pentax-Discuss Mail List. To unsubscribe, go to http://www.pdml.net and follow the directions. Don't forget to visit the Pentax Users' Gallery at http://pug.komkon.org .
Re: Re: More on cleaning slides/negatives
Thanks everyone. I will have to re-think my office at home. I bet most of the dust comes from the carpet. Maybe an ionizer and a humidifier will help to keep it down. I'll also be looking for the various fluids and potions that were mentioned. As for the clone tool. I do it for the huge obvious stuff but honestly I've been too lazy to take out every spot. I'll be changing my mind on that as well. Thanks again Christian - This message is from the Pentax-Discuss Mail List. To unsubscribe, go to http://www.pdml.net and follow the directions. Don't forget to visit the Pentax Users' Gallery at http://pug.komkon.org .
RE: More on cleaning slides/negatives
You are not alone. Frits Wüthrich Cotty wrote: > Another reason why I'm waiting for the MZ-D! - This message is from the Pentax-Discuss Mail List. To unsubscribe, go to http://www.pdml.net and follow the directions. Don't forget to visit the Pentax Users' Gallery at http://pug.komkon.org .
Re: More on cleaning slides/negatives
>> How the #$!%&*(^*%$ do you get all the dust off your slides or negatives >> before you scan them? > >Two words: Clone Tool I final rinse my negs in Daz...;-) Seriously, I use a rubber dust blower to get as much crapola off the neg as possible, then scan, then the Rubber Stamp (Clone) Tool to get those hard-to-get bits off (usually from the corners). Laborious, but mandatory. Another reason why I'm waiting for the MZ-D! ___ Personal email traffic to [EMAIL PROTECTED] MacAds traffic to [EMAIL PROTECTED] Check out the UK Macintosh ads http://www.macads.co.uk - This message is from the Pentax-Discuss Mail List. To unsubscribe, go to http://www.pdml.net and follow the directions. Don't forget to visit the Pentax Users' Gallery at http://pug.komkon.org .
Re: More on cleaning slides/negatives
>I would bet it is pretty dry in your house. That causes a lot of static on >the slide that holds the dust in place like a magnet. My experience is that >when the humidity is 60% or so the dust pretty much blows off with >compressed air. Short of humidifying the house you might try one of those >anti-static gizmos, there used to be several on the market. Hey, I'm not saying it's dusty in our house, but we have a cat that sleeps on the neg scanner... ;-) Cotty ___ Personal email traffic to [EMAIL PROTECTED] MacAds traffic to [EMAIL PROTECTED] Check out the UK Macintosh ads http://www.macads.co.uk - This message is from the Pentax-Discuss Mail List. To unsubscribe, go to http://www.pdml.net and follow the directions. Don't forget to visit the Pentax Users' Gallery at http://pug.komkon.org .
Re: More on cleaning slides/negatives
I would bet it is pretty dry in your house. That causes a lot of static on the slide that holds the dust in place like a magnet. My experience is that when the humidity is 60% or so the dust pretty much blows off with compressed air. Short of humidifying the house you might try one of those anti-static gizmos, there used to be several on the market. Ciao, graywolf [EMAIL PROTECTED] - Original Message - From: Christian Skofteland <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Sunday, December 30, 2001 4:15 PM Subject: More on cleaning slides/negatives > Ok, I know we've covered this in the past but I'm going to ask again (and > pay attention to the answers this time!): > > How the #$!%&*(^*%$ do you get all the dust off your slides or negatives > before you scan them? > > I've been trying to catch up on scanning slides with my new/used HP > PhotoSmart scanner. I've been using compressed air and anti-static wipes > on both the slides and the scanner itself but I'm still frustrated with all > the crap that shows up on the final scan. > > Any help is greatly appreciated. Thanks in advance. > > Christian Skofteland > [EMAIL PROTECTED] > - > This message is from the Pentax-Discuss Mail List. To unsubscribe, > go to http://www.pdml.net and follow the directions. Don't forget to > visit the Pentax Users' Gallery at http://pug.komkon.org . - This message is from the Pentax-Discuss Mail List. To unsubscribe, go to http://www.pdml.net and follow the directions. Don't forget to visit the Pentax Users' Gallery at http://pug.komkon.org .
RE: More on cleaning slides/negatives
What I do is this: I took a blower brush, removed the brush (it simply slides off, easy to put back on again) and I blow the strip of negatives or mounted slides (whatever I am scanning at that moment) after I have put them in the scanning holder. Sometimes the scan result is so that I redo this cleaning to remove a particle that escaped the first treatment, but usually this is not needed. I also used a can with compressed air, but it just doesn't last very long, and with the UK prices I didn't want to buy another one. Frits Wüthrich Christian Skofteland asked: > Ok, I know we've covered this in the past but I'm going to ask again (and > pay attention to the answers this time!): > > How the #$!%&*(^*%$ do you get all the dust off your slides or negatives > before you scan them? > > I've been trying to catch up on scanning slides with my new/used HP > PhotoSmart scanner. I've been using compressed air and anti-static wipes > on both the slides and the scanner itself but I'm still > frustrated with all > the crap that shows up on the final scan. > > Any help is greatly appreciated. Thanks in advance. > > Christian Skofteland > [EMAIL PROTECTED] - This message is from the Pentax-Discuss Mail List. To unsubscribe, go to http://www.pdml.net and follow the directions. Don't forget to visit the Pentax Users' Gallery at http://pug.komkon.org .
Re: More on cleaning slides/negatives
> How the #$!%&*(^*%$ do you get all the dust off your slides or negatives > before you scan them? Two words: Clone Tool The scan doesn't have to be perfect dust-wise. I use a can of air to get big particles out, and try to do as good as possible with that. Then I use Photoshop's clone tool to digitally remove any specs of dust. Set the view to 1:1 and scroll around the whole image. A Wacom tablet or similar makes the process very easy. I'm using a small Wacom Graphire that costs $90 or so and comes with Photoshop LE. It is a bit of work, but you have to do it only once per negative, as opposed to a real darkroom, where you have to deal with dust once per print (I had a bad experience with a particularly dusty darkroom setup, I realize dust is something that can be controlled without much hassle, but I'm still frustrated about it) Hth, j = -- Juan J. Buhler http://www.jbuhler.com Send your FREE holiday greetings online! http://greetings.yahoo.com - This message is from the Pentax-Discuss Mail List. To unsubscribe, go to http://www.pdml.net and follow the directions. Don't forget to visit the Pentax Users' Gallery at http://pug.komkon.org .
Re: More on cleaning slides/negatives
On 30 Dec 2001 at 16:15, Christian Skofteland wrote: > Ok, I know we've covered this in the past but I'm going to ask again (and > pay attention to the answers this time!): > > How the #$!%&*(^*%$ do you get all the dust off your slides or negatives > before you scan them? Hi Christian, There are a few issues to consider WRT to your question, they are pertinent to both conventional printing and digital scanning (however scanning seems more sensitized to dust etc.) Firstly you will be chasing your tail if the room that you are working in is not clean ie it has to be regularly dusted and/or vacuum cleaned. Some photogs I know of even employ active filters and/or positive Ion generators to further reduce airborne dust and contaminants. The ultimate film cleaner that I found is from a company called Dycem, it consists of two opposing "sticky" rollers that the film is passed through along with an earthed anti-static brush across the film at the exit. The dust gets stuck on the rollers (which can be easily cleaned) and the brush neutralizes the charge on the film so that new dust is not immediately attracted to it. (I can't remember the URL but I have a pic.) The unfortunate thing is that this gear was really expensive (I don't remember just how much but I was glad that I was sitting down when I read the price :-) I thought that it was a good idea so I made a dodgy copy of it. I found some Taiwanese sticky lint removers made of what I guess was a similar material and have been using them with some success. BTW they just wash out in mild detergent, it's really weird rubbery stuff? I also have some really good water based foaming anti-static cleaner (VDU-99 from CRC Industries) that cleans and makes my work areas anti-static, this helps. Compressed Air (or Nitrogen) can make things a lot easier too, a quick spray before the film goes into the scanner ensures that all but sticky dust is removed from the film surface. Again though if the room is not clean this can serve to just stir up the dust and make more problems. I have a small bottle of nitrogen, a regulator (Oxygen), 10m of hose and a gun style fitting, I use this set-up to clean my film, scanners, cameras and lenses too. The cost of the hardware was under US$55 and I just rent the bottle. I hope that this helps :-) Just one more reason to love digital cameras. Cheers, Rob Studdert HURSTVILLE AUSTRALIA Tel +61-2-9554-4110 UTC(GMT) +10 Hours [EMAIL PROTECTED] http://members.ozemail.com.au/~distudio/publications.html - This message is from the Pentax-Discuss Mail List. To unsubscribe, go to http://www.pdml.net and follow the directions. Don't forget to visit the Pentax Users' Gallery at http://pug.komkon.org .
Re: More on cleaning slides/negatives
PEC-12 cleaning fluid applied sparingly with PEC Pads. Maris - Original Message - From: "Christian Skofteland" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Sunday, December 30, 2001 3:15 PM Subject: More on cleaning slides/negatives | Ok, I know we've covered this in the past but I'm going to ask again (and | pay attention to the answers this time!): | | How the #$!%&*(^*%$ do you get all the dust off your slides or negatives | before you scan them? | | I've been trying to catch up on scanning slides with my new/used HP | PhotoSmart scanner. I've been using compressed air and anti-static wipes | on both the slides and the scanner itself but I'm still frustrated with all | the crap that shows up on the final scan. | | Any help is greatly appreciated. Thanks in advance. | | Christian Skofteland | [EMAIL PROTECTED] | - | This message is from the Pentax-Discuss Mail List. To unsubscribe, | go to http://www.pdml.net and follow the directions. Don't forget to | visit the Pentax Users' Gallery at http://pug.komkon.org . | | - This message is from the Pentax-Discuss Mail List. To unsubscribe, go to http://www.pdml.net and follow the directions. Don't forget to visit the Pentax Users' Gallery at http://pug.komkon.org .