Re: FYI Pro Tools 11.1 is now available.
That may very well be accurate. The only versions of 10 and 11 that I ever had on the same partition were both betas of 10.3.8 and 11.1. Slau On Jan 5, 2014, at 9:12 AM, TheOreoMonster monkeypushe...@gmail.com wrote: From what i heard when Avid pushed Mavericks support in Pro Tools 11.0.3 it broke the compatibility with running version 10 on the same mavericks partition. 10.3.8 and 11.1 should be able to coexist on the same partition again though under mavericks. On Jan 3, 2014, at 11:30 PM, Slau Halatyn slauhala...@gmail.com wrote: Hi Scott, I'm not sure exactly what you read but Pro Tools 11 and 10 can coexist on the same partition. That's what I currently have on my laptop. Slau On Jan 3, 2014, at 4:17 AM, Scott Chesworth scottcheswo...@gmail.com wrote: Hey folks, In plundering the Avid site for an 11.1 demo (which still doesn't seem to be available), I noticed this potential gotcha in the late breaking readme stuff: •Pro Tools 11.1 co-install with Pro Tools 10.x is not supported using Mac OS X 10.9 Mavericks ( This is a bit of a bummer, seeing as it's exactly what I hoped to do until the cash for an upgrade to 11 becomes available. Does not supported mean it flat out doesn't work, or just that they won't take tech support requests about it? Cheers for any info Scott On 1/3/14, TheOreoMonster monkeypushe...@gmail.com wrote: Yes avid process of demoting into your system is accessible. If memory serves correct, they send you a link, you go there and click the accept or permit button allowing them into your system. Tech support should be on the phone with you th e whole time and tell you what they are doing if VO isn’t speaking it. BTW thanks for the tip on 10.3.8. I was wondering why it was only showing the Paid 11.0 upgrade and not 10.3.8 as well. On Jan 1, 2014, at 1:37 PM, Nick Gawronski n...@nickgawronski.com wrote: Hi, When trying to update to pro tools 10.3.7 I get to the software updates screen after the software update check upon pro tools startup told me a new version was out and there was that link you select after you press the get updates button that says internal link it is a red orange errow and I get one of two options either the 10.3.7 or the paid 11.0 update but when the 10.3.7 update is selected I am not able to find the download links for it no matter what I try. I have tried this process on both lion and mountain lion and no luck. I also talked to people at the Guitar Center and they suggested I call Avid about possibley remoting into my system once I buy the upgrade to transfer the ilok license my question is is that process of getting them into your computer accessible and how can I access this 10.3.7 update as I want to have 10 updated before buying 11? Nick Gawronski On 1/1/2014 9:10 AM, studiojay wrote: HHi Slau and every one, First of all, let me wish everyone on the list a very happy new year. Slau, thanks so much for a super Christmas and new year gift. I am really amazed at how much more of the program that is accessible now. The channel strip plug-in is amazing. Really appreciate every thing that's being done JasonTuesday, December 31, 2013 3:05:15 PM UTC-4, Slau Halatyn wrote: Thanks, Byron, but none of this would've happened without the foresight of key people at Digidesign and avid as well as Apple. There will be an opportunity for the community at large to help take it up a notch as well. More to come soon. Best, Slau On Dec 31, 2013, at 5:49 AM, byron harden stico...@gmail.com wrote: hello all. i would like to publicly thank slau for all of the hard work. it is paying off. chers to a great humanbing, On Dec 27, 2013, at 4:05 PM, Gordon Kent dbm...@cybernex.net wrote: This is good news. I was actually playing around a bit last night with the pro remote app for the iphone and pt10. It does give you a lot of stuff and you can do things like mix automation and select regions and run the transport. I haven’t figured out how to get at inserts and sends in the mix view yet. I should try it on the iPad instead because it would fit a lot more at once. You can run four instances of it to handle 32 tracks at once. If I could get it to take the whole screen on the iPad i imagine I could get at a lot of stuff. You do get values for everything, and PT responds quickly to your commands. It’s a bit quirky getting it to connect to your wifi network sometimes but once it is on it works wherever you go. I want to try it with braille so that I can do vocals and stuff with no speech going. Gord On Dec 27, 2013, at 3:59 PM, Slau Halatyn slauh...@gmail.com wrote: As many of you will recall, I practically threw in the towel a couple of months ago. As it turned out, there were programmers turning wheels without my knowledge. When I was made aware of this, frankly, it was a bit of a surprise. Actually, there are things in the works now that will bring
Re: FYI Pro Tools 11.1 is now available.
So if you get a copy of PT 10 with an 11 upgrade, should a person get the 10.3.8 update before upgrading to the 11 versions? Is there any particular sequences of instalations and updates that should be followed if a person buys a PT 10 with an 11 upgrade? Thanks - Original Message - From: Slau Halatyn slauhala...@gmail.com To: ptaccess@googlegroups.com Sent: Monday, January 06, 2014 6:29 AM Subject: Re: FYI Pro Tools 11.1 is now available. That may very well be accurate. The only versions of 10 and 11 that I ever had on the same partition were both betas of 10.3.8 and 11.1. Slau On Jan 5, 2014, at 9:12 AM, TheOreoMonster monkeypushe...@gmail.com wrote: From what i heard when Avid pushed Mavericks support in Pro Tools 11.0.3 it broke the compatibility with running version 10 on the same mavericks partition. 10.3.8 and 11.1 should be able to coexist on the same partition again though under mavericks. On Jan 3, 2014, at 11:30 PM, Slau Halatyn slauhala...@gmail.com wrote: Hi Scott, I'm not sure exactly what you read but Pro Tools 11 and 10 can coexist on the same partition. That's what I currently have on my laptop. Slau On Jan 3, 2014, at 4:17 AM, Scott Chesworth scottcheswo...@gmail.com wrote: Hey folks, In plundering the Avid site for an 11.1 demo (which still doesn't seem to be available), I noticed this potential gotcha in the late breaking readme stuff: •Pro Tools 11.1 co-install with Pro Tools 10.x is not supported using Mac OS X 10.9 Mavericks ( This is a bit of a bummer, seeing as it's exactly what I hoped to do until the cash for an upgrade to 11 becomes available. Does not supported mean it flat out doesn't work, or just that they won't take tech support requests about it? Cheers for any info Scott On 1/3/14, TheOreoMonster monkeypushe...@gmail.com wrote: Yes avid process of demoting into your system is accessible. If memory serves correct, they send you a link, you go there and click the accept or permit button allowing them into your system. Tech support should be on the phone with you th e whole time and tell you what they are doing if VO isn’t speaking it. BTW thanks for the tip on 10.3.8. I was wondering why it was only showing the Paid 11.0 upgrade and not 10.3.8 as well. On Jan 1, 2014, at 1:37 PM, Nick Gawronski n...@nickgawronski.com wrote: Hi, When trying to update to pro tools 10.3.7 I get to the software updates screen after the software update check upon pro tools startup told me a new version was out and there was that link you select after you press the get updates button that says internal link it is a red orange errow and I get one of two options either the 10.3.7 or the paid 11.0 update but when the 10.3.7 update is selected I am not able to find the download links for it no matter what I try. I have tried this process on both lion and mountain lion and no luck. I also talked to people at the Guitar Center and they suggested I call Avid about possibley remoting into my system once I buy the upgrade to transfer the ilok license my question is is that process of getting them into your computer accessible and how can I access this 10.3.7 update as I want to have 10 updated before buying 11? Nick Gawronski On 1/1/2014 9:10 AM, studiojay wrote: HHi Slau and every one, First of all, let me wish everyone on the list a very happy new year. Slau, thanks so much for a super Christmas and new year gift. I am really amazed at how much more of the program that is accessible now. The channel strip plug-in is amazing. Really appreciate every thing that's being done JasonTuesday, December 31, 2013 3:05:15 PM UTC-4, Slau Halatyn wrote: Thanks, Byron, but none of this would've happened without the foresight of key people at Digidesign and avid as well as Apple. There will be an opportunity for the community at large to help take it up a notch as well. More to come soon. Best, Slau On Dec 31, 2013, at 5:49 AM, byron harden stico...@gmail.com wrote: hello all. i would like to publicly thank slau for all of the hard work. it is paying off. chers to a great humanbing, On Dec 27, 2013, at 4:05 PM, Gordon Kent dbm...@cybernex.net wrote: This is good news. I was actually playing around a bit last night with the pro remote app for the iphone and pt10. It does give you a lot of stuff and you can do things like mix automation and select regions and run the transport. I haven’t figured out how to get at inserts and sends in the mix view yet. I should try it on the iPad instead because it would fit a lot more at once. You can run four instances of it to handle 32 tracks at once. If I could get it to take the whole screen on the iPad i imagine I could get at a lot of stuff. You do get values for everything, and PT responds quickly to your commands. It’s a bit quirky getting it to connect to your wifi network sometimes but once it is on it works wherever you go. I want to try it with braille so that I can
Re: FYI Pro Tools 11.1 is now available.
As I've never gone the route of installing both purchased versions, I can't say what the precise process is. Frankly, I face the issue of iLok licensing as well so haven't gotten to install released masters yet. Regarding iLok issues, they're being addressed with PACE Anti-Piracy at the moment. That's a different topic, however. If anyone can say, definitively, what happens with the installation of purchased copies of 11 and 10, please share. Best, Slau On Jan 6, 2014, at 11:10 AM, Poppa Bear heavens4r...@gmail.com wrote: So if you get a copy of PT 10 with an 11 upgrade, should a person get the 10.3.8 update before upgrading to the 11 versions? Is there any particular sequences of instalations and updates that should be followed if a person buys a PT 10 with an 11 upgrade? Thanks - Original Message - From: Slau Halatyn slauhala...@gmail.com To: ptaccess@googlegroups.com Sent: Monday, January 06, 2014 6:29 AM Subject: Re: FYI Pro Tools 11.1 is now available. That may very well be accurate. The only versions of 10 and 11 that I ever had on the same partition were both betas of 10.3.8 and 11.1. Slau On Jan 5, 2014, at 9:12 AM, TheOreoMonster monkeypushe...@gmail.com wrote: From what i heard when Avid pushed Mavericks support in Pro Tools 11.0.3 it broke the compatibility with running version 10 on the same mavericks partition. 10.3.8 and 11.1 should be able to coexist on the same partition again though under mavericks. On Jan 3, 2014, at 11:30 PM, Slau Halatyn slauhala...@gmail.com wrote: Hi Scott, I'm not sure exactly what you read but Pro Tools 11 and 10 can coexist on the same partition. That's what I currently have on my laptop. Slau On Jan 3, 2014, at 4:17 AM, Scott Chesworth scottcheswo...@gmail.com wrote: Hey folks, In plundering the Avid site for an 11.1 demo (which still doesn't seem to be available), I noticed this potential gotcha in the late breaking readme stuff: •Pro Tools 11.1 co-install with Pro Tools 10.x is not supported using Mac OS X 10.9 Mavericks ( This is a bit of a bummer, seeing as it's exactly what I hoped to do until the cash for an upgrade to 11 becomes available. Does not supported mean it flat out doesn't work, or just that they won't take tech support requests about it? Cheers for any info Scott On 1/3/14, TheOreoMonster monkeypushe...@gmail.com wrote: Yes avid process of demoting into your system is accessible. If memory serves correct, they send you a link, you go there and click the accept or permit button allowing them into your system. Tech support should be on the phone with you th e whole time and tell you what they are doing if VO isn’t speaking it. BTW thanks for the tip on 10.3.8. I was wondering why it was only showing the Paid 11.0 upgrade and not 10.3.8 as well. On Jan 1, 2014, at 1:37 PM, Nick Gawronski n...@nickgawronski.com wrote: Hi, When trying to update to pro tools 10.3.7 I get to the software updates screen after the software update check upon pro tools startup told me a new version was out and there was that link you select after you press the get updates button that says internal link it is a red orange errow and I get one of two options either the 10.3.7 or the paid 11.0 update but when the 10.3.7 update is selected I am not able to find the download links for it no matter what I try. I have tried this process on both lion and mountain lion and no luck. I also talked to people at the Guitar Center and they suggested I call Avid about possibley remoting into my system once I buy the upgrade to transfer the ilok license my question is is that process of getting them into your computer accessible and how can I access this 10.3.7 update as I want to have 10 updated before buying 11? Nick Gawronski On 1/1/2014 9:10 AM, studiojay wrote: HHi Slau and every one, First of all, let me wish everyone on the list a very happy new year. Slau, thanks so much for a super Christmas and new year gift. I am really amazed at how much more of the program that is accessible now. The channel strip plug-in is amazing. Really appreciate every thing that's being done JasonTuesday, December 31, 2013 3:05:15 PM UTC-4, Slau Halatyn wrote: Thanks, Byron, but none of this would've happened without the foresight of key people at Digidesign and avid as well as Apple. There will be an opportunity for the community at large to help take it up a notch as well. More to come soon. Best, Slau On Dec 31, 2013, at 5:49 AM, byron harden stico...@gmail.com wrote: hello all. i would like to publicly thank slau for all of the hard work. it is paying off. chers to a great humanbing, On Dec 27, 2013, at 4:05 PM, Gordon Kent dbm...@cybernex.net wrote: This is good news. I was actually playing around a bit last night with the pro remote app for the iphone and pt10. It does give you a lot of stuff and you can do things like mix
Re: FYI Pro Tools 11.1 is now available.
Prior to installing ProTools 11.1, I first installed the 10.3.8 upgrade. Coming from a software dev background, this is the way we always did things to insure installing earlier versions secondary, didn't introduce regressions. As far as iLok goes when I purchased my upgrade, a license for 10,11 bundle was deposited in my iLok account and My wife drug thebundle over via the iLok license manager. On 1/6/14, Slau Halatyn slauhala...@gmail.com wrote: As I've never gone the route of installing both purchased versions, I can't say what the precise process is. Frankly, I face the issue of iLok licensing as well so haven't gotten to install released masters yet. Regarding iLok issues, they're being addressed with PACE Anti-Piracy at the moment. That's a different topic, however. If anyone can say, definitively, what happens with the installation of purchased copies of 11 and 10, please share. Best, Slau On Jan 6, 2014, at 11:10 AM, Poppa Bear heavens4r...@gmail.com wrote: So if you get a copy of PT 10 with an 11 upgrade, should a person get the 10.3.8 update before upgrading to the 11 versions? Is there any particular sequences of instalations and updates that should be followed if a person buys a PT 10 with an 11 upgrade? Thanks - Original Message - From: Slau Halatyn slauhala...@gmail.com To: ptaccess@googlegroups.com Sent: Monday, January 06, 2014 6:29 AM Subject: Re: FYI Pro Tools 11.1 is now available. That may very well be accurate. The only versions of 10 and 11 that I ever had on the same partition were both betas of 10.3.8 and 11.1. Slau On Jan 5, 2014, at 9:12 AM, TheOreoMonster monkeypushe...@gmail.com wrote: From what i heard when Avid pushed Mavericks support in Pro Tools 11.0.3 it broke the compatibility with running version 10 on the same mavericks partition. 10.3.8 and 11.1 should be able to coexist on the same partition again though under mavericks. On Jan 3, 2014, at 11:30 PM, Slau Halatyn slauhala...@gmail.com wrote: Hi Scott, I'm not sure exactly what you read but Pro Tools 11 and 10 can coexist on the same partition. That's what I currently have on my laptop. Slau On Jan 3, 2014, at 4:17 AM, Scott Chesworth scottcheswo...@gmail.com wrote: Hey folks, In plundering the Avid site for an 11.1 demo (which still doesn't seem to be available), I noticed this potential gotcha in the late breaking readme stuff: •Pro Tools 11.1 co-install with Pro Tools 10.x is not supported using Mac OS X 10.9 Mavericks ( This is a bit of a bummer, seeing as it's exactly what I hoped to do until the cash for an upgrade to 11 becomes available. Does not supported mean it flat out doesn't work, or just that they won't take tech support requests about it? Cheers for any info Scott On 1/3/14, TheOreoMonster monkeypushe...@gmail.com wrote: Yes avid process of demoting into your system is accessible. If memory serves correct, they send you a link, you go there and click the accept or permit button allowing them into your system. Tech support should be on the phone with you th e whole time and tell you what they are doing if VO isn’t speaking it. BTW thanks for the tip on 10.3.8. I was wondering why it was only showing the Paid 11.0 upgrade and not 10.3.8 as well. On Jan 1, 2014, at 1:37 PM, Nick Gawronski n...@nickgawronski.com wrote: Hi, When trying to update to pro tools 10.3.7 I get to the software updates screen after the software update check upon pro tools startup told me a new version was out and there was that link you select after you press the get updates button that says internal link it is a red orange errow and I get one of two options either the 10.3.7 or the paid 11.0 update but when the 10.3.7 update is selected I am not able to find the download links for it no matter what I try. I have tried this process on both lion and mountain lion and no luck. I also talked to people at the Guitar Center and they suggested I call Avid about possibley remoting into my system once I buy the upgrade to transfer the ilok license my question is is that process of getting them into your computer accessible and how can I access this 10.3.7 update as I want to have 10 updated before buying 11? Nick Gawronski On 1/1/2014 9:10 AM, studiojay wrote: HHi Slau and every one, First of all, let me wish everyone on the list a very happy new year. Slau, thanks so much for a super Christmas and new year gift. I am really amazed at how much more of the program that is accessible now. The channel strip plug-in is amazing. Really appreciate every thing that's being done JasonTuesday, December 31, 2013 3:05:15 PM UTC-4, Slau Halatyn wrote: Thanks, Byron, but none of this would've happened without the foresight of key people at Digidesign and avid as well as Apple. There will be an opportunity for the community at large to help take it up a notch as well. More to come soon. Best, Slau On Dec 31,
Re: FYI Pro Tools 11.1 is now available.
Hi Matt, OK, so that confirms that 10.3.8 is available to version 10 users regardless of their purchasing version 11. The iLok process, of course, is consistent with past experience. Best, Slau On Jan 6, 2014, at 12:06 PM, matt diemert mcdiem...@gmail.com wrote: Prior to installing ProTools 11.1, I first installed the 10.3.8 upgrade. Coming from a software dev background, this is the way we always did things to insure installing earlier versions secondary, didn't introduce regressions. As far as iLok goes when I purchased my upgrade, a license for 10,11 bundle was deposited in my iLok account and My wife drug thebundle over via the iLok license manager. On 1/6/14, Slau Halatyn slauhala...@gmail.com wrote: As I've never gone the route of installing both purchased versions, I can't say what the precise process is. Frankly, I face the issue of iLok licensing as well so haven't gotten to install released masters yet. Regarding iLok issues, they're being addressed with PACE Anti-Piracy at the moment. That's a different topic, however. If anyone can say, definitively, what happens with the installation of purchased copies of 11 and 10, please share. Best, Slau On Jan 6, 2014, at 11:10 AM, Poppa Bear heavens4r...@gmail.com wrote: So if you get a copy of PT 10 with an 11 upgrade, should a person get the 10.3.8 update before upgrading to the 11 versions? Is there any particular sequences of instalations and updates that should be followed if a person buys a PT 10 with an 11 upgrade? Thanks - Original Message - From: Slau Halatyn slauhala...@gmail.com To: ptaccess@googlegroups.com Sent: Monday, January 06, 2014 6:29 AM Subject: Re: FYI Pro Tools 11.1 is now available. That may very well be accurate. The only versions of 10 and 11 that I ever had on the same partition were both betas of 10.3.8 and 11.1. Slau On Jan 5, 2014, at 9:12 AM, TheOreoMonster monkeypushe...@gmail.com wrote: From what i heard when Avid pushed Mavericks support in Pro Tools 11.0.3 it broke the compatibility with running version 10 on the same mavericks partition. 10.3.8 and 11.1 should be able to coexist on the same partition again though under mavericks. On Jan 3, 2014, at 11:30 PM, Slau Halatyn slauhala...@gmail.com wrote: Hi Scott, I'm not sure exactly what you read but Pro Tools 11 and 10 can coexist on the same partition. That's what I currently have on my laptop. Slau On Jan 3, 2014, at 4:17 AM, Scott Chesworth scottcheswo...@gmail.com wrote: Hey folks, In plundering the Avid site for an 11.1 demo (which still doesn't seem to be available), I noticed this potential gotcha in the late breaking readme stuff: •Pro Tools 11.1 co-install with Pro Tools 10.x is not supported using Mac OS X 10.9 Mavericks ( This is a bit of a bummer, seeing as it's exactly what I hoped to do until the cash for an upgrade to 11 becomes available. Does not supported mean it flat out doesn't work, or just that they won't take tech support requests about it? Cheers for any info Scott On 1/3/14, TheOreoMonster monkeypushe...@gmail.com wrote: Yes avid process of demoting into your system is accessible. If memory serves correct, they send you a link, you go there and click the accept or permit button allowing them into your system. Tech support should be on the phone with you th e whole time and tell you what they are doing if VO isn’t speaking it. BTW thanks for the tip on 10.3.8. I was wondering why it was only showing the Paid 11.0 upgrade and not 10.3.8 as well. On Jan 1, 2014, at 1:37 PM, Nick Gawronski n...@nickgawronski.com wrote: Hi, When trying to update to pro tools 10.3.7 I get to the software updates screen after the software update check upon pro tools startup told me a new version was out and there was that link you select after you press the get updates button that says internal link it is a red orange errow and I get one of two options either the 10.3.7 or the paid 11.0 update but when the 10.3.7 update is selected I am not able to find the download links for it no matter what I try. I have tried this process on both lion and mountain lion and no luck. I also talked to people at the Guitar Center and they suggested I call Avid about possibley remoting into my system once I buy the upgrade to transfer the ilok license my question is is that process of getting them into your computer accessible and how can I access this 10.3.7 update as I want to have 10 updated before buying 11? Nick Gawronski On 1/1/2014 9:10 AM, studiojay wrote: HHi Slau and every one, First of all, let me wish everyone on the list a very happy new year. Slau, thanks so much for a super Christmas and new year gift. I am really amazed at how much more of the program that is accessible now. The channel strip plug-in is amazing. Really appreciate every thing that's being done JasonTuesday, December 31, 2013 3:05:15 PM
Re: Accessibility pt10.3.8 vs pt11.1
Hi Slau, Thanks for the explanation. I was just wondering how much accessibility improvement in 11 was included in 10.3.8 as well. Regardless, I'm looking forward to upgrading to 11! Chi On 1/5/2014 12:27 PM, Slau Halatyn wrote: Hi Chi, Yes, there is a difference. The focus on accessibility in the future will be on version 11. There were improvements to 10.3.8 for sure but it was not the primary concentration. From now on, any updates to version 10 will be general maintenance and will not likely include significant improvements to accessibility. Much like bug fixes in other software, it's not expected that the developer will go back to previous versions of the software to fix the problem. The point is that it's fixed in the new version and that's it. In this situation, however, there are still people needing to use version 10 during the transition from 32 to 64 bit and while plug-in developers are pulling up the rear. I was surprised at how much was actually done in 10.3.8 to begin with. BTW, one task that is still only doable in 10 and not 11 is to create a custom nudge value. In 11, a VoiceOver user can only choose from the default values whereas in 10 they can click a button, type a value and be done. In neither version is the numeric value visible. Surely, it'll be fixed in 11 at some point but I doubt it'll be addressed in 10. Best, Slau On Jan 5, 2014, at 10:53 AM, Chi Kim chigook...@hotmail.com wrote: Hi, First Slau, congratulation on this milestone! Thank you for making this happen! Is there any difference in accessibility between pt10.3.8 vs pt11.1? Thanks, Chi -- You received this message because you are subscribed to the Google Groups Pro Tools Accessibility group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups Pro Tools Accessibility group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
Re: Accessibility pt10.3.8 vs pt11.1
Hi Chi, I haven't compared them side by side for that purpose but i'll try to look at it shortly to give a general sense. Slau On Jan 6, 2014, at 12:37 PM, Chi Kim chigook...@hotmail.com wrote: Hi Slau, Thanks for the explanation. I was just wondering how much accessibility improvement in 11 was included in 10.3.8 as well. Regardless, I'm looking forward to upgrading to 11! Chi On 1/5/2014 12:27 PM, Slau Halatyn wrote: Hi Chi, Yes, there is a difference. The focus on accessibility in the future will be on version 11. There were improvements to 10.3.8 for sure but it was not the primary concentration. From now on, any updates to version 10 will be general maintenance and will not likely include significant improvements to accessibility. Much like bug fixes in other software, it's not expected that the developer will go back to previous versions of the software to fix the problem. The point is that it's fixed in the new version and that's it. In this situation, however, there are still people needing to use version 10 during the transition from 32 to 64 bit and while plug-in developers are pulling up the rear. I was surprised at how much was actually done in 10.3.8 to begin with. BTW, one task that is still only doable in 10 and not 11 is to create a custom nudge value. In 11, a VoiceOver user can only choose from the default values whereas in 10 they can click a button, type a value and be done. In neither version is the numeric value visible. Surely, it'll be fixed in 11 at some point but I doubt it'll be addressed in 10. Best, Slau On Jan 5, 2014, at 10:53 AM, Chi Kim chigook...@hotmail.com wrote: Hi, First Slau, congratulation on this milestone! Thank you for making this happen! Is there any difference in accessibility between pt10.3.8 vs pt11.1? Thanks, Chi -- You received this message because you are subscribed to the Google Groups Pro Tools Accessibility group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups Pro Tools Accessibility group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups Pro Tools Accessibility group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
Re: Accessibility pt10.3.8 vs pt11.1
Hi Chi, OK, I've had a chance to review and refresh my memory of the issues of 10 versus 11. Upon review, version 11 really contains all of the improvements. The only substantive improvement that version 10 has is mainly the accessibility of the counters and AAX plug-ins. Regarding the counters, that could quite possibly be because of Mavericks versus Mountain Lion. It's been 8 months since I tried version 11 on Mountain Lion and there were a load of problems, not the least of which was the counter display issue. So, with version 10.3.8, the counters are readable but, whether that's because of Mavericks or not, I can't say for sure as I've been on Mavericks since the bulk of the accessibility work started. regarding plug-ins, the AAX plug-ins are accessible for the most part in version 10 but not in the same way as they are in 11. In a pinch, I was able to use some plug-ins for an emergency after my beta license for 11 ran out. iLok License Manager not yet being accessible, my only choice at the time was to use version 10 for which I had purchased a license back before the License Manager was introduced. So, with those two mentionable improvements but not much else that I can tell at a cursory glance, the focus is really on 11. Hope that helps, Slau On Jan 6, 2014, at 12:37 PM, Chi Kim chigook...@hotmail.com wrote: Hi Slau, Thanks for the explanation. I was just wondering how much accessibility improvement in 11 was included in 10.3.8 as well. Regardless, I'm looking forward to upgrading to 11! Chi On 1/5/2014 12:27 PM, Slau Halatyn wrote: Hi Chi, Yes, there is a difference. The focus on accessibility in the future will be on version 11. There were improvements to 10.3.8 for sure but it was not the primary concentration. From now on, any updates to version 10 will be general maintenance and will not likely include significant improvements to accessibility. Much like bug fixes in other software, it's not expected that the developer will go back to previous versions of the software to fix the problem. The point is that it's fixed in the new version and that's it. In this situation, however, there are still people needing to use version 10 during the transition from 32 to 64 bit and while plug-in developers are pulling up the rear. I was surprised at how much was actually done in 10.3.8 to begin with. BTW, one task that is still only doable in 10 and not 11 is to create a custom nudge value. In 11, a VoiceOver user can only choose from the default values whereas in 10 they can click a button, type a value and be done. In neither version is the numeric value visible. Surely, it'll be fixed in 11 at some point but I doubt it'll be addressed in 10. Best, Slau On Jan 5, 2014, at 10:53 AM, Chi Kim chigook...@hotmail.com wrote: Hi, First Slau, congratulation on this milestone! Thank you for making this happen! Is there any difference in accessibility between pt10.3.8 vs pt11.1? Thanks, Chi -- You received this message because you are subscribed to the Google Groups Pro Tools Accessibility group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups Pro Tools Accessibility group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups Pro Tools Accessibility group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
update on my midi controller issue
hi i wrote a couple days ago about my midi controller not being recognized well i googled it so far no luck get a error saying original hui device hui cannot be found i’m guessing its not supported in pt11 i went to the site but there page is horrible to navigate i went to contact info and could not find any where to fill out forms i have a novation impulse 61 it uses a software called auto map i’m also guessing its not updated yet for pt11 -- You received this message because you are subscribed to the Google Groups Pro Tools Accessibility group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
Re: update on my midi controller issue
Hi Chad, Have you tried to contact the manufacturer of the surface? They might be able to help. Slau On Jan 6, 2014, at 1:27 PM, chad baker baker3...@gmail.com wrote: hi i wrote a couple days ago about my midi controller not being recognized well i googled it so far no luck get a error saying original hui device hui cannot be found i’m guessing its not supported in pt11 i went to the site but there page is horrible to navigate i went to contact info and could not find any where to fill out forms i have a novation impulse 61 it uses a software called auto map i’m also guessing its not updated yet for pt11 -- You received this message because you are subscribed to the Google Groups Pro Tools Accessibility group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups Pro Tools Accessibility group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
Re: update on my midi controller issue
Hi Chad, Have you tried to contact the manufacturer of the surface? They might be abl On Jan 6, 2014, at 1:27 PM, chad baker baker3...@gmail.com wrote: hi i wrote a couple days ago about my midi controller not being recognized well i googled it so far no luck get a error saying original hui device hui cannot be found i’m guessing its not supported in pt11 i went to the site but there page is horrible to navigate i went to contact info and could not find any where to fill out forms i have a novation impulse 61 it uses a software called auto map i’m also guessing its not updated yet for pt11 -- You received this message because you are subscribed to the Google Groups Pro Tools Accessibility group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups Pro Tools Accessibility group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
Re: Understanding a Mackie universal pro with PT
They’re ok, but you might want to use the adat connector for input and a standalone a/d box. I have a presonus that is good. The good thing about the alesis is that the menus don’t rap, and there is a dedicated button called home/preset where you can use the value dial to step through something like 10 setups for different daws. Once you select pro tools and push the dial down which acts like enter you’re ready to go. Of course you have to tell pro tools what ports to use in the hui setup. The m-audio project mix is another alternative, and it has two adat connectors and eight mic pres. The mic pres suck in my oppinion, and I don’t think it is quite as stable, it was made a long time ago. But it does have more dedicated buttons on it for aux sends and the like. THe jog dial is detented though, not as good for scrubbing. GordOn Jan 5, 2014, at 9:05 PM, Poppa Bear heavens4r...@gmail.com wrote: I will check that out Gord, how are the AD converters? - Original Message - From: Gordon Kent To: ptaccess@googlegroups.com Sent: Sunday, January 05, 2014 4:40 PM Subject: Re: Understanding a Mackie universal pro with PT This is why I really like my alesis master mix control surface. It works well with a lot of daws including pro tools, and it does have a decent audio interface. Although it only has 2 mic pres, it does have 8 line inputs and s/pdif and adat inputs. The jog wheel is very smooth for scrubbing, and for around $750 you can’t beat it. GordOn Jan 5, 2014, at 1:23 PM, Poppa Bear heavens4r...@gmail.com wrote: So as far as I understand, the MC universal pro is only a control surface with no audio ins such as line ins, pre's or optical/SPDIF, so in order to run audio in you would still need an audio interface to run external press into the DAW? I do have a mackie Onyx 16 20I around, could that be the audio interface and the MC pro be the control surfase in theory? Thanks for any thoughts on this. -- You received this message because you are subscribed to the Google Groups Pro Tools Accessibility group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups Pro Tools Accessibility group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups Pro Tools Accessibility group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups Pro Tools Accessibility group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
Re: FYI Pro Tools 11.1 is now available.
Well, you’re lucky. I haven’t gotten my pt 11.1 license installed on mhy ilock account yet even though I registgered with A Avid. GOrd On Jan 6, 2014, at 12:17 PM, Slau Halatyn slauhala...@gmail.com wrote: Hi Matt, OK, so that confirms that 10.3.8 is available to version 10 users regardless of their purchasing version 11. The iLok process, of course, is consistent with past experience. Best, Slau On Jan 6, 2014, at 12:06 PM, matt diemert mcdiem...@gmail.com wrote: Prior to installing ProTools 11.1, I first installed the 10.3.8 upgrade. Coming from a software dev background, this is the way we always did things to insure installing earlier versions secondary, didn't introduce regressions. As far as iLok goes when I purchased my upgrade, a license for 10,11 bundle was deposited in my iLok account and My wife drug thebundle over via the iLok license manager. On 1/6/14, Slau Halatyn slauhala...@gmail.com wrote: As I've never gone the route of installing both purchased versions, I can't say what the precise process is. Frankly, I face the issue of iLok licensing as well so haven't gotten to install released masters yet. Regarding iLok issues, they're being addressed with PACE Anti-Piracy at the moment. That's a different topic, however. If anyone can say, definitively, what happens with the installation of purchased copies of 11 and 10, please share. Best, Slau On Jan 6, 2014, at 11:10 AM, Poppa Bear heavens4r...@gmail.com wrote: So if you get a copy of PT 10 with an 11 upgrade, should a person get the 10.3.8 update before upgrading to the 11 versions? Is there any particular sequences of instalations and updates that should be followed if a person buys a PT 10 with an 11 upgrade? Thanks - Original Message - From: Slau Halatyn slauhala...@gmail.com To: ptaccess@googlegroups.com Sent: Monday, January 06, 2014 6:29 AM Subject: Re: FYI Pro Tools 11.1 is now available. That may very well be accurate. The only versions of 10 and 11 that I ever had on the same partition were both betas of 10.3.8 and 11.1. Slau On Jan 5, 2014, at 9:12 AM, TheOreoMonster monkeypushe...@gmail.com wrote: From what i heard when Avid pushed Mavericks support in Pro Tools 11.0.3 it broke the compatibility with running version 10 on the same mavericks partition. 10.3.8 and 11.1 should be able to coexist on the same partition again though under mavericks. On Jan 3, 2014, at 11:30 PM, Slau Halatyn slauhala...@gmail.com wrote: Hi Scott, I'm not sure exactly what you read but Pro Tools 11 and 10 can coexist on the same partition. That's what I currently have on my laptop. Slau On Jan 3, 2014, at 4:17 AM, Scott Chesworth scottcheswo...@gmail.com wrote: Hey folks, In plundering the Avid site for an 11.1 demo (which still doesn't seem to be available), I noticed this potential gotcha in the late breaking readme stuff: •Pro Tools 11.1 co-install with Pro Tools 10.x is not supported using Mac OS X 10.9 Mavericks ( This is a bit of a bummer, seeing as it's exactly what I hoped to do until the cash for an upgrade to 11 becomes available. Does not supported mean it flat out doesn't work, or just that they won't take tech support requests about it? Cheers for any info Scott On 1/3/14, TheOreoMonster monkeypushe...@gmail.com wrote: Yes avid process of demoting into your system is accessible. If memory serves correct, they send you a link, you go there and click the accept or permit button allowing them into your system. Tech support should be on the phone with you th e whole time and tell you what they are doing if VO isn’t speaking it. BTW thanks for the tip on 10.3.8. I was wondering why it was only showing the Paid 11.0 upgrade and not 10.3.8 as well. On Jan 1, 2014, at 1:37 PM, Nick Gawronski n...@nickgawronski.com wrote: Hi, When trying to update to pro tools 10.3.7 I get to the software updates screen after the software update check upon pro tools startup told me a new version was out and there was that link you select after you press the get updates button that says internal link it is a red orange errow and I get one of two options either the 10.3.7 or the paid 11.0 update but when the 10.3.7 update is selected I am not able to find the download links for it no matter what I try. I have tried this process on both lion and mountain lion and no luck. I also talked to people at the Guitar Center and they suggested I call Avid about possibley remoting into my system once I buy the upgrade to transfer the ilok license my question is is that process of getting them into your computer accessible and how can I access this 10.3.7 update as I want to have 10 updated before buying 11? Nick Gawronski On 1/1/2014 9:10 AM, studiojay wrote: HHi Slau and every one, First of all, let me wish everyone on the list a very happy new year. Slau, thanks so much for a super Christmas and new