Qmail and EZMLm
Hi. I have a little problem with my mailing lists. I use ezmlm to manage this mailing list , and Qmail to delivery the messages. This is what happens when I send the message that I want to mail. The ezmlm reply this message to the MOD ( myself ), this message is a confirmation, that my e-mail is ready to be launch to list. When I accept this message, the must start the delivery procedure, but this is not happenning since yesterday. Yesterday was working just fine, but now is not working. Can somebody help me please. Thanks a lot G.V
failure notice (qmail and ezmlm)
Hello all, I am having difficulty in getting my mailing lists to work. I believe that the lists addressed are not even being evaluated by ezmlm, but are being reject by qmail due to a configuration mistake on my part. The msg at the end of this email is a forward of the failure notice from qmail. Also, I am including my configs and other info below: "aquinas.pp.asu.edu" is the host's real name, and "hdshc.asu.edu" is an alias for this host. All mailing lists are in the form "[EMAIL PROTECTED]" (virtual domain) -- but seems to get reformatted to "[EMAIL PROTECTED]", which is annoying but workable; This system used to work until I screwed something up in the config files :( I would greatly appreciate any help on this. I have been fighting this for a day now and need to get the lists back up. BEGIN FILES: users/assign--- +hdshc.asu.edu-:hdshc.asu.edu:1002:83:/home/vpopmail/domains/hdshc.asu.edu:-:: +aquinas.pp.asu.edu-:aquinas.pp.asu.edu:1002:83:/home/vpopmail/domains/aquinas.pp.asu.edu:-:: . control/defaultdomain- pp.asu.edu -control/defaulthost-- hdshc.asu.edu control/locals-- localhost.asu.edu aquinas.pp.asu.edu -control/me- aquinas.pp.asu.edu --control/plusdomain- asu.edu ---control/rcpthosts- localhost.asu.edu aquinas.pp.asu.edu hdshc.asu.edu control/virtualdomains--- aquinas.pp.asu.edu:hdshc.asu.edu END FILES I know the problem is probably simple, but I can't see it. It has deffinately prompted me to want to learn more about email systems and qmail more specifically. Again, any assistance on this would be greatly appreciated. -- Ben Trussell Hugh Downs School of Human Communication [EMAIL PROTECTED] You can write a small letter to Grandma in the filename. -- Forbes Burkowski, CS, University of Washington -- Forwarded message -- Date: Fri, 26 Jan 2001 17:49:41 + From: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: failure notice Hi. This is the qmail-send program at aquinas.pp.asu.edu. I'm afraid I wasn't able to deliver your message to the following addresses. This is a permanent error; I've given up. Sorry it didn't work out. [EMAIL PROTECTED]: Sorry, no mailbox here by that name. (#5.1.1) --- Below this line is a copy of the message. Return-Path: [EMAIL PROTECTED] Received: (qmail 424 invoked from network); 26 Jan 2001 17:49:41 - Received: from post2.inre.asu.edu (129.219.110.73) by aquinas.pp.asu.edu with SMTP; 26 Jan 2001 17:49:41 - Received: from conversion.post2.inre.asu.edu by asu.edu (PMDF V6.0-24 #47347) id [EMAIL PROTECTED] for [EMAIL PROTECTED]; Fri, 26 Jan 2001 10:38:52 -0700 (MST) Received: from general2.asu.edu (general2.asu.edu [129.219.10.242]) by asu.edu (PMDF V6.0-24 #47347) with ESMTP id [EMAIL PROTECTED] for [EMAIL PROTECTED]; Fri, 26 Jan 2001 10:38:52 -0700 (MST) Received: from localhost (localhost [127.0.0.1]) by general2.asu.edu (8.9.3/8.9.3) with ESMTP id KAA00141for [EMAIL PROTECTED]; Fri, 26 Jan 2001 10:38:48 -0700 (MST) Date: Fri, 26 Jan 2001 10:38:48 -0700 (MST) From: Ben [EMAIL PROTECTED] X-Sender: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Message-id: [EMAIL PROTECTED] MIME-version: 1.0 Content-type: TEXT/PLAIN; charset=US-ASCII -- Ben Trussell Hugh Downs School of Human Communication [EMAIL PROTECTED] Dishonor will not trouble me, once I am dead. -- Euripides
Re: failure notice (qmail and ezmlm)
On Fri, Jan 26, 2001 at 11:08:49AM -0700, Ben wrote: All mailing lists are in the form "[EMAIL PROTECTED]" (virtual domain) -- but seems to get reformatted to "[EMAIL PROTECTED]", This is because of hdshc.asu.edu. IN CNAME aquinas.pp.asu.edu. hdshc.asu.edu will be rewritten to aquinas.pp.asu.edu by mailservers as a CNAME says kinda "this host does not exist and is really called aquinas.pp.asu.edu". control/locals-- localhost.asu.edu aquinas.pp.asu.edu control/virtualdomains--- aquinas.pp.asu.edu:hdshc.asu.edu A host may not be in locals and virtualdomains at the same time (i.e. it may, but locals takes precedence to virtualdomains). Another problem might be that if the ezmlm mailinglist is configured to be [EMAIL PROTECTED] it will not accept beeing called [EMAIL PROTECTED] The easiest way to fix your problem is probably to change hdshc.asu.edu. IN CNAME aquinas.pp.asu.edu. to hdshc.asu.edu. IN A 129.219.125.101 \Maex -- SpaceNet AG| Joseph-Dollinger-Bogen 14 | Fon: +49 (89) 32356-0 Research Development | D-80807 Muenchen| Fax: +49 (89) 32356-299 Stress is when you wake up screaming and you realize you haven't fallen asleep yet.
Re: failure notice (qmail and ezmlm)
On Fri, Jan 26, 2001 at 11:08:49AM -0700, Ben wrote: I am having difficulty in getting my mailing lists to work. I believe that the lists addressed are not even being evaluated by ezmlm, but are being reject by qmail due to a configuration mistake on my part. The msg at the end of this email is a forward of the failure notice from qmail. Also, I am including my configs and other info below: "aquinas.pp.asu.edu" is the host's real name, and "hdshc.asu.edu" is an alias for this host. All mailing lists are in the form "[EMAIL PROTECTED]" (virtual domain) -- but seems to get reformatted to "[EMAIL PROTECTED]", which is annoying but workable; Remove the CNAME record and make it an A or an MX record. That's what's causing the rewriting of the host name. BEGIN FILES: users/assign--- +hdshc.asu.edu-:hdshc.asu.edu:1002:83:/home/vpopmail/domains/hdshc.asu.edu:-:: +aquinas.pp.asu.edu-:aquinas.pp.asu.edu:1002:83:/home/vpopmail/domains/aquinas.pp.asu.edu:-:: . control/defaultdomain- pp.asu.edu -control/defaulthost-- hdshc.asu.edu control/locals-- localhost.asu.edu aquinas.pp.asu.edu -control/me- aquinas.pp.asu.edu --control/plusdomain- asu.edu ---control/rcpthosts- localhost.asu.edu aquinas.pp.asu.edu hdshc.asu.edu control/virtualdomains--- aquinas.pp.asu.edu:hdshc.asu.edu END FILES I know the problem is probably simple, but I can't see it. It has deffinately prompted me to want to learn more about email systems and qmail more specifically. You have aquinas.pp.asu.edu in both locals and virtualdomains. Having a domain in both files is always a mistake. To fix your problem, get rid of the CNAME, and add hdshc.asu.edu to virtualdomains and remove it from locals. Chris
Help with qmail and ezmlm
Hello I'm using ezmlm. I have a list of people in a list. I use ezmlm-send to send the message in the following way # ezmlm-send ~/list "mail.file" I've checked the queue and the emails of the users that the message is suposed to go are ok. But after the email is sent by qmail the email that apears in the "To:" label isn't correct. It apears like this "pedro.pires?[EMAIL PROTECTED]" and it should apear "[EMAIL PROTECTED]" Anyone have experienced this? Thanks Pedro Pires
Re: Help with qmail and ezmlm
On Wed, Nov 15, 2000 at 12:51:43PM -, Pedro Pires wrote: Hello I'm using ezmlm. Good. Then try the list for ezmlm: [EMAIL PROTECTED] I have a list of people in a list. I use ezmlm-send to send the message in the following way # ezmlm-send ~/list "mail.file" I've checked the queue and the emails of the users that the message is suposed to go are ok. But after the email is sent by qmail the email that apears in the "To:" label isn't correct. It apears like this "pedro.pires?[EMAIL PROTECTED]" and it should apear "[EMAIL PROTECTED]" Anyone have experienced this? Thanks Pedro Pires -- +--- | Ricardo Cerqueira | PGP Key fingerprint - B7 05 13 CE 48 0A BF 1E 87 21 83 DB 28 DE 03 42 | Novis - Engenharia ISP / Rede Técnica | Pç. Duque Saldanha, 1, 7º E / 1050-094 Lisboa / Portugal | Tel: +351 2 1010 - Fax: +351 2 1010 4459 PGP signature
problems with qmail and ezmlm
hi everybody i've configured qmail 1.53 , ezmlm 0.53 and ezmlm-idx-0.324. the problem is when i try to create a moderate list, the moderator don't receive the mail for confirm the user's subscription i used the next comands: ezmlm-make -rdugm -5 [EMAIL PROTECTED] /var/qmail/alias/lista2 /var/qmail/alias/.qmail-lista2 lista2 pnt170.inycom.es ezmlm-sub /var/qmail/alias/lista2/mod [EMAIL PROTECTED] ezmlm-sub /var/qmail/alias/lista2/digest [EMAIL PROTECTED] ezmlm-sub /var/qmail/alias/lista2 [EMAIL PROTECTED] Then when an user wants to subscribe then he sends a mail to lista2-subscribe and he receives the next message: confirm subscribe to [EMAIL PROTECTED] then this user reply a this message, but the moderator [EMAIL PROTECTED] don't receive the message to confirm user's subscrition, and the user receive the next message: WELCOME to [EMAIL PROTECTED] Why don't the moderator receive the message. Can anybody help me, please? Thank in advance
Re: help qmail+vpopmail+ezmlm+qmailadmin+sqwebmail
Hi Ken I had three lines in the assign file, and a single period for the last line. I had added single period's after each line. But the problem still remains. Kapil You probably don't have a ending line with a single period . That is why qmail-newu is failing to compile. and without a compiled assign file, qmail won't be able to find the virtual domain directory to deliver it to.
Re: help qmail+vpopmail+ezmlm+qmailadmin+sqwebmail
Cool Stuff Ken... Thanks... No No don't go away, now my one problem is solved i.e users/assign, by doing what you said. I am able to send+recieve the mails using sqwebmail. But when I use outlook express or Netscape messenger it gives me error There was a problem logging onto your mail server. Your Password was rejected. Account: 'kapil', Server: '208.248.123.45', Protocol: POP3, Server Response: '-ERR authorization failed', Port: 110, Secure(SSL): No, Server Error: 0x800CCC90, Error Number: 0x800CCC92. Any thoughts Regards, Kapil. - Original Message - From: Ken Jones [EMAIL PROTECTED] To: Kapil Nanda [EMAIL PROTECTED] Sent: Monday, May 08, 2000 9:02 PM Subject: Re: help qmail+vpopmail+ezmlm+qmailadmin+sqwebmail Kapil Nanda wrote: Hi Ken I had three lines in the assign file, and a single period for the last line. I had added single period's after each line. But the problem still remains. Kapil You probably don't have a ending line with a single period . That is why qmail-newu is failing to compile. and without a compiled assign file, qmail won't be able to find the virtual domain directory to deliver it to. dont' put periods at the end of each line. If you want to try starting over, run ~vpopmail/bin/vdeldomain domain for each of the current domains. Then remove the assign file, and start again by adding the domains with ~vpopmail/bin/vadddomain domain pass ken
help qmail+vpopmail+ezmlm+qmailadmin+sqwebmail
The scenariois : I have installed qmail1.03 on Mandrake Linux 6.0. And the local domain is "velosmed.com" and the local accounts by creating actual users on that system works. I am able to send and receive emails Then I installed vpopmail from www.inter7.com; then ezmlm ; and qmailadmin from www.inter7.com and finally installed sqwebmail on that system. Now the problem is that, when I create an virtual domain on that system by using vpopmail : /home/vpopmail/bin/vadddomainintranet.velosmed.com password it gives me "qmail-newu" error : fatal bad format in users/assign and I when I try to access that account using the outlook express, it gives me authentication error, says bad password when the password is correct. however I am able to create the accounts using the qmailadmin, and access that accounts using sqwebmail but the mail is not coming. If someone sends the mail to that virtually created accounts, the error comes that there is no mailbox by that name. Help ... Kapil
Segmentation Fault in Qmail-send (Ezmlm+idx 0.40 on Solaris 7)
I just tried upgrading to the latest and greatest. A couple of problems: a) Can't use getdate() as a function name in ezmlm-cgi.c, it conflicts with a Solaris /usr/include/time.h function - I had to hack that out by hand. I already sent this to Fred and he fixed up ezmlm-cgi.c so it's fine now. b) I compiled and installed idx per the instructions. Now, anytime an incoming message goes to an ezmlm list, I get the following: 953538244.357569 status: local 1/10 remote 4/80 953538245.050340 delivery 1219510: deferral: Segmentation_Fault_-_core_dumped/ 953538245.050372 status: local 0/10 remote 4/80 953538278.060982 starting delivery 1219511: msg 64726 to local [EMAIL PROTECTED] I'm using ezmlm+idx in conjunction with vpopmail (and have been for awhile). Running ezmlm-test returns the following: # ./ezmlm-test usage: ps [ -aAdeflcjLPy ] [ -o format ] [ -t termlist ] [ -u userlist ] [ -U userlist ] [ -G grouplist ] [ -p proclist ] [ -g pgrplist ] [ -s sidlist ] 'format' is one or more of: user ruser group rgroup uid ruid gid rgid pid ppid pgid sid pri opri pcpu pmem vsz rss osz nice class time etime stime f s c lwp nlwp psr tty addr wchan fname comm args qmail isn't running or ps doesn't work as expected. If qmail is not running, this script will fail. Will continue... testing ezmlm-idx:ezmlm-idx-0.40 Using FQDN host name: audi.x.org -n ezmlm-make (1/2): OK -n Using RDBMS support: No. -n testing for qmail: =1.02 -n ezmlm-reject: Broken Pipe Broken Pipe Broken Pipe Broken Pipe Broken Pipe Broken Pipe ... It's an endless broken pipe. I did hack out the ezmlm-reject portion of the file per the test instructions but that doesn't fix this nor does it help the actual mail server from core dumping. If I run "file core" on the core I get: core: ELF 32-bit MSB core file SPARC Version 1, from 'ezmlm-send' Any help would be greatly appreciated. I've searched the list archives online as best as possible (the ezmlm list seems to be missing from ezmlm.org..?) For the mean time, I'm going to downgrade back to 0.324. I really want to use the new ezmlm-cgi and VERH features, so any help comes with many a thank you in advance! :) Also - per Fred's recommendation, I compiled WITHOUT optimization using GCC 2.8.1 just to test another possibility and still the same error/break point. Looking forward to eventually getting the new version up and running. :) Brian
