[qmailtoaster] about clamav-toaster-0.97.3 build
hi all , who can help me ? how to build clamav-toaster? system:fedora16_x64 [root@demo6 rpm]# rpmbuild --rebuild --with fedora_1164 clamav-toaster-0.97.3-1.3.44.src.rpm Installing clamav-toaster-0.97.3-1.3.44.src.rpm Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.aDBAE3 + umask 022 + cd /root/rpmbuild/BUILD + LANG=C + export LANG + unset DISPLAY + cd /root/rpmbuild/BUILD + rm -rf clamav-0.97.3 + /bin/tar -xf - + /usr/bin/bzip2 -dc /root/rpmbuild/SOURCES/clamav-0.97.3.tar.bz2 + STATUS=0 + '[' 0 -ne 0 ']' + cd clamav-0.97.3 + /bin/chmod -Rf a+rX,u+w,g-w,o-w . + echo 'Patch #0 (clamav-0.9x-qmailtoaster.patch.bz2):' Patch #0 (clamav-0.9x-qmailtoaster.patch.bz2): + /usr/bin/patch -s -p1 --fuzz=0 + /usr/bin/bzip2 -dc /root/rpmbuild/SOURCES/clamav-0.9x-qmailtoaster.patch.bz2 1 out of 7 hunks FAILED -- saving rejects to file etc/clamd.conf.rej error: Bad exit status from /var/tmp/rpm-tmp.aDBAE3 (%prep) RPM build errors: Bad exit status from /var/tmp/rpm-tmp.aDBAE3 (%prep) 2012-03-08 qmt
Re: [qmailtoaster] Re: Spamdyke-Stats-Report script no longer working
Correct Eric, however when I ps'd for spamd it was in memory so I naturally assumed it was running. Thanks again... best wishes Tony White Yea Computing Services http://www.ycs.com.au 4 The Crescent Yea Victoria Australia 3717 Telephone No's VIC : 03 9008 5614 FAX : 03 9008 5610 (FAX2Email) IMPORTANT NOTICE This communication including any file attachments is intended solely for the use of the individual or entity to whom it is addressed. If you are not the intended recipient, or the person responsible for delivering this communication to the intended recipient, please immediately notify the sender by email and delete the original transmission and its contents. Any unauthorised use, dissemination, forwarding, printing or copying of this communication including file attachments is prohibited. It is your responsibility to scan this communication including any file attachments for viruses and other defects. To the extent permitted by law, Yea Computing Services and its associates will not be liable for any loss or damage arising in any way from this communication including any file attachments. You may not disclose this information to a third party without written permission from the Author. On 08/03/2012 08:53, Eric Shubert wrote: Then spamdyke's not running. Check the /var/qmail/supervise/smtp/run file. It should be a symlink to run.spamdyke (qtp-install-spamdyke should have set this up). If the symlink is there, then stop and start qmail. - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
[qmailtoaster] Re: Spamdyke-Stats-Report script no longer working
Then spamdyke's not running. Check the /var/qmail/supervise/smtp/run file. It should be a symlink to run.spamdyke (qtp-install-spamdyke should have set this up). If the symlink is there, then stop and start qmail. -- -Eric 'shubes' On 03/07/2012 02:43 PM, Tony White wrote: Not seeing spamdyke in the logs but there are threads for spamd. However I am now seeing this accepted any recipient for this domain in the logs! There are no entries in the smtp log since 4:45am 1st March 2012. best wishes Tony White Yea Computing Services http://www.ycs.com.au 4 The Crescent Yea Victoria Australia 3717 Telephone No's VIC : 03 9008 5614 FAX : 03 9008 5610 (FAX2Email) IMPORTANT NOTICE This communication including any file attachments is intended solely for the use of the individual or entity to whom it is addressed. If you are not the intended recipient, or the person responsible for delivering this communication to the intended recipient, please immediately notify the sender by email and delete the original transmission and its contents. Any unauthorised use, dissemination, forwarding, printing or copying of this communication including file attachments is prohibited. It is your responsibility to scan this communication including any file attachments for viruses and other defects. To the extent permitted by law, Yea Computing Services and its associates will not be liable for any loss or damage arising in any way from this communication including any file attachments. You may not disclose this information to a third party without written permission from the Author. On 08/03/2012 04:03, Eric Shubert wrote: On 03/06/2012 08:25 PM, Tony White wrote: Hello again, Thanks to Eric and to Brent but neither seem to be the issue. I have updated spamdyke and check the script at the command line and still only gets zeros for results! Also no errors reported at the command line. I have noticed getting more spam through since the update though! best wishes Tony White Are you seeing spamdyke messages in the smtp log? - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Re: Spamdyke-Stats-Report script no longer working
Hi all, I think it was a matter of restarting qmail! The logs are no filling nicely with spamdyke denies. Thank you for your efforts. best wishes Tony White Yea Computing Services http://www.ycs.com.au 4 The Crescent Yea Victoria Australia 3717 Telephone No's VIC : 03 9008 5614 FAX : 03 9008 5610 (FAX2Email) IMPORTANT NOTICE This communication including any file attachments is intended solely for the use of the individual or entity to whom it is addressed. If you are not the intended recipient, or the person responsible for delivering this communication to the intended recipient, please immediately notify the sender by email and delete the original transmission and its contents. Any unauthorised use, dissemination, forwarding, printing or copying of this communication including file attachments is prohibited. It is your responsibility to scan this communication including any file attachments for viruses and other defects. To the extent permitted by law, Yea Computing Services and its associates will not be liable for any loss or damage arising in any way from this communication including any file attachments. You may not disclose this information to a third party without written permission from the Author. On 08/03/2012 08:43, Tony White wrote: Not seeing spamdyke in the logs but there are threads for spamd. However I am now seeing this accepted any recipient for this domain in the logs! There are no entries in the smtp log since 4:45am 1st March 2012. best wishes Tony White Yea Computing Services http://www.ycs.com.au 4 The Crescent Yea Victoria Australia 3717 Telephone No's VIC : 03 9008 5614 FAX : 03 9008 5610 (FAX2Email) IMPORTANT NOTICE This communication including any file attachments is intended solely for the use of the individual or entity to whom it is addressed. If you are not the intended recipient, or the person responsible for delivering this communication to the intended recipient, please immediately notify the sender by email and delete the original transmission and its contents. Any unauthorised use, dissemination, forwarding, printing or copying of this communication including file attachments is prohibited. It is your responsibility to scan this communication including any file attachments for viruses and other defects. To the extent permitted by law, Yea Computing Services and its associates will not be liable for any loss or damage arising in any way from this communication including any file attachments. You may not disclose this information to a third party without written permission from the Author. On 08/03/2012 04:03, Eric Shubert wrote: On 03/06/2012 08:25 PM, Tony White wrote: Hello again, Thanks to Eric and to Brent but neither seem to be the issue. I have updated spamdyke and check the script at the command line and still only gets zeros for results! Also no errors reported at the command line. I have noticed getting more spam through since the update though! best wishes Tony White Are you seeing spamdyke messages in the smtp log? - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Re: Spamdyke-Stats-Report script no longer working
Not seeing spamdyke in the logs but there are threads for spamd. However I am now seeing this accepted any recipient for this domain in the logs! There are no entries in the smtp log since 4:45am 1st March 2012. best wishes Tony White Yea Computing Services http://www.ycs.com.au 4 The Crescent Yea Victoria Australia 3717 Telephone No's VIC : 03 9008 5614 FAX : 03 9008 5610 (FAX2Email) IMPORTANT NOTICE This communication including any file attachments is intended solely for the use of the individual or entity to whom it is addressed. If you are not the intended recipient, or the person responsible for delivering this communication to the intended recipient, please immediately notify the sender by email and delete the original transmission and its contents. Any unauthorised use, dissemination, forwarding, printing or copying of this communication including file attachments is prohibited. It is your responsibility to scan this communication including any file attachments for viruses and other defects. To the extent permitted by law, Yea Computing Services and its associates will not be liable for any loss or damage arising in any way from this communication including any file attachments. You may not disclose this information to a third party without written permission from the Author. On 08/03/2012 04:03, Eric Shubert wrote: On 03/06/2012 08:25 PM, Tony White wrote: Hello again, Thanks to Eric and to Brent but neither seem to be the issue. I have updated spamdyke and check the script at the command line and still only gets zeros for results! Also no errors reported at the command line. I have noticed getting more spam through since the update though! best wishes Tony White Are you seeing spamdyke messages in the smtp log? - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
[qmailtoaster] Re: attachments
On 03/07/2012 01:53 PM, Sys wrote: Files are Identical, even down to the corredct byte size 8280. So , how do i force a reinstall SM Thanks # rpm -Uvh --force squirrelmail-toaster-*.rpm If you used qtp-newmodel to update, the rpm will be in /usr/src/qtp-upgrade/old-rpms/. -- -Eric 'shubes' - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Re: attachments
Files are Identical, even down to the corredct byte size 8280. So , how do i force a reinstall SM Thanks - Original Message - From: "Sys" To: Sent: Wednesday, March 07, 2012 1:46 PM Subject: Re: [qmailtoaster] Re: attachments I will check and post back. - Original Message - From: "Eric Shubert" To: Sent: Wednesday, March 07, 2012 12:56 PM Subject: [qmailtoaster] Re: attachments On 03/07/2012 11:45 AM, Dave MacDonald wrote: Users can open any attachment with horde ( it even shows a thumbnail pic ), but the same attachment when opened in squirrelmail failes, IE: error cannot open attachment, unknown file type. That`s any file type, except plain text docs So how does SM know (or think it knows) which file type is which? How does the file /usr/share/squirrelmail/functions/attachment_common.php compare between the system that works and the one that doesn't? -- -Eric 'shubes' - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Re: attachments
I will check and post back. - Original Message - From: "Eric Shubert" To: Sent: Wednesday, March 07, 2012 12:56 PM Subject: [qmailtoaster] Re: attachments On 03/07/2012 11:45 AM, Dave MacDonald wrote: Users can open any attachment with horde ( it even shows a thumbnail pic ), but the same attachment when opened in squirrelmail failes, IE: error cannot open attachment, unknown file type. That`s any file type, except plain text docs So how does SM know (or think it knows) which file type is which? How does the file /usr/share/squirrelmail/functions/attachment_common.php compare between the system that works and the one that doesn't? -- -Eric 'shubes' - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
[qmailtoaster] Re: attachments
On 03/07/2012 11:45 AM, Dave MacDonald wrote: Users can open any attachment with horde ( it even shows a thumbnail pic ), but the same attachment when opened in squirrelmail failes, IE: error cannot open attachment, unknown file type. That`s any file type, except plain text docs So how does SM know (or think it knows) which file type is which? How does the file /usr/share/squirrelmail/functions/attachment_common.php compare between the system that works and the one that doesn't? -- -Eric 'shubes' - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Re: attachments
Hi, On Wed, Mar 7, 2012 at 8:45 PM, Dave MacDonald wrote: > Users can open any attachment with horde ( it even shows a thumbnail pic ), > but the same attachment when opened in squirrelmail failes, IE: error cannot > open attachment, unknown file type. > That`s any file type, except plain text docs I'm out of answers then... It definetely seems like a Squirrelmail problem. If reinstallation does not help and Squirrelmail configs are identical on both servers, I really don't know what could be wrong. It has to be something on your server as you have reported that on the other server Squirrelmail works (and nobody else is experiencing this behavior with their squirrels). Regards, Peter - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Re: attachments
Selinux disabled, php.ini and Apache configs are identical I now have " hored " installed also, Users can open any attachment with horde ( it even shows a thumbnail pic ), but the same attachment when opened in squirrelmail failes, IE: error cannot open attachment, unknown file type. That`s any file type, except plain text docs On 3/7/2012 11:21 AM, Peter Peltonen wrote: Hi, On Wed, Mar 7, 2012 at 5:59 PM, Sys wrote: Found a ton of php errors in apache logs. Domain names and IP address`s have been changed to potect the inocent : ) [Mon Mar 05 15:35:47 2012] [error] [client 1.2.3.57] PHP Notice: Undefined index: domname in /usr/share/toaster/qcontrol/utils/list_users.php on line 3, referer: http://1.2.3.4/qcontrol/menu.html Notices are not errors and therefore do not explain the behavior you are experiencing. And those notices seems to relate to qcontrol, not squirrelmail. As the servers are *not* identical in their setup, I would start looking at differences in /etc/php.ini and Apache configs. Also, did you check if SElinux is enabled or not in both servers as I suggested earlier? Regards, Peter - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Re: attachments
Hi, On Wed, Mar 7, 2012 at 5:59 PM, Sys wrote: > Found a ton of php errors in apache logs. > Domain names and IP address`s have been changed to potect the inocent : ) > > [Mon Mar 05 15:35:47 2012] [error] [client 1.2.3.57] PHP Notice: Undefined > index: domname in /usr/share/toaster/qcontrol/utils/list_users.php on line > 3, referer: http://1.2.3.4/qcontrol/menu.html Notices are not errors and therefore do not explain the behavior you are experiencing. And those notices seems to relate to qcontrol, not squirrelmail. As the servers are *not* identical in their setup, I would start looking at differences in /etc/php.ini and Apache configs. Also, did you check if SElinux is enabled or not in both servers as I suggested earlier? Regards, Peter - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
[qmailtoaster] Re: chkuser rejecting mail to users with hyphens
On 03/03/2012 08:13 AM, Russ Goodwin wrote: Hi- I just upgraded our QMT install using the qtp-newmodel script and found that mail to users' virtual addresses (e.g. russ-t...@tidewinds.com) is getting rejected with the following message: SMTP error from remote mail server after RCPT TO:https://webmail.tidewinds.com/webmail/src/compose.php?send_to=russ-treg%40tidewinds.com>>: host mail.tidewinds.com [63.251.133.5]: 550 5.1.1 sorry, no mailbox here by that name (chkuser) Mail sent to my actual mailbox (r...@tidewinds.com) goes through just fine. I'm looking around but can't tell what needs to change to bring this functionality back. Any pointers would be greatly appreciated! Thanks. -Russ So did you follow all of that, Russ? (Thanks again to Tonino) I've verified that this feature (user extensions) was changed (turned off) in this latest version. I'm not sure what Jake's thinking was, but I'll get it turned back on in the next release. Since doing a build with custom chkuser settings is such a PITA, which I'll work on getting this out asap (hopefully in the next day or two). Thanks. -- -Eric 'shubes' - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
[qmailtoaster] Re: chkuser rejecting mail to users with hyphens
On 03/07/2012 02:03 AM, Tonix (Antonio Nati) wrote: Il 06/03/2012 20:37, Eric Shubert ha scritto: While I understand your scenario for when it should be used, I disagree that it should be avoided if possible. That may be the case for a service provider which has hundreds if not thousands of accounts, but not in all cases. I agree, it depends on situations. In my case, when a user need an extension, he adds an alias. I suggest only expert people should use catchall, as no error message is sent back, so senders are not notified about not existing recipients. I think this is a good guideline. It is true, but in this situation you are not really using chkuser, as any recipient is accepted for your domain. You (system manager) may change badmailfrom, but normal users or qmailadmin administrators cannot. As conseguence, all spam messages become real traffic instead of being stopped at SMTP level. I see your point. I do like seeing messages blocked at the SMTP level whenever possible (who wouldn't?). I'm not seeing much of a down side to enabling all 3 of these settings by default. What is the down side in your view? I'm inclined to change the QMT default configuration to allow all 3 by default, which brings QMT in line with qmail's default behavior. However I certainly wouldn't do this without consulting you, as well as anyone else who'd like to chime in on this. It is pretty normal to enable all three. This will let you avoid catchall accounts (unless there are other reasons to have catchall). That's what I'm thinking. I'll propose that we change the defaults in another thread. Thanks for your input on this Tonino. Your continued contributions have great value, and we appreciate your work. -- -Eric 'shubes' - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Spamdyke-Stats-Report script no longer working
On 03/06/2012 08:25 PM, Tony White wrote: Hello again, Thanks to Eric and to Brent but neither seem to be the issue. I have updated spamdyke and check the script at the command line and still only gets zeros for results! Also no errors reported at the command line. Do you run the script as root or as an unprivileged user? By default, unprivileged users don't have read rights to the qmail logs. If you had changed rights on the qmail log directories to allow access to unprivileged users, the qtp-newmodel process appears to reset the rights back to the stricter defaults. Brent Gardner - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
[qmailtoaster] Re: Spamdyke-Stats-Report script no longer working
On 03/06/2012 08:25 PM, Tony White wrote: Hello again, Thanks to Eric and to Brent but neither seem to be the issue. I have updated spamdyke and check the script at the command line and still only gets zeros for results! Also no errors reported at the command line. I have noticed getting more spam through since the update though! best wishes Tony White Are you seeing spamdyke messages in the smtp log? -- -Eric 'shubes' - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Re: attachments
Found a ton of php errors in apache logs. Domain names and IP address`s have been changed to potect the inocent : ) [Mon Mar 05 15:35:47 2012] [error] [client 1.2.3.57] PHP Notice: Undefined index: domname in /usr/share/toaster/qcontrol/utils/list_users.php on line 3, referer: http://1.2.3.4/qcontrol/menu.html [Mon Mar 05 15:35:47 2012] [error] [client 1.2.3.57] PHP Notice: Undefined index: beenthere in /usr/share/toaster/qcontrol/utils/list_users.php on line 4, referer: http://1.2.3.4/qcontrol/menu.html [Mon Mar 05 15:35:47 2012] [error] [client 1.2.3.57] File does not exist: /var/www/html/favicon.ico [Mon Mar 05 15:35:53 2012] [error] [client 1.2.3.57] PHP Notice: Undefined index: beenthere in /usr/share/toaster/qcontrol/utils/list_users.php on line 4, referer: http://1.2.3.4/qcontrol/utils/list_users.php [Mon Mar 05 15:35:53 2012] [error] [client 1.2.3.57] PHP Notice: Undefined offset: 6 in /usr/share/toaster/qcontrol/utils/list_users.php on line 23, referer: http://1.2.3.4/qcontrol/utils/list_users.php [Mon Mar 05 15:35:53 2012] [error] [client 1.2.3.57] PHP Notice: Undefined offset: 6 in /usr/share/toaster/qcontrol/utils/list_users.php on line 23, referer: http://1.2.3.4/qcontrol/utils/list_users.php [Mon Mar 05 15:35:54 2012] [error] [client 1.2.3.57] File does not exist: /var/www/html/favicon.ico [Mon Mar 05 15:35:56 2012] [error] [client 1.2.3.57] PHP Notice: Undefined index: beenthere in /usr/share/toaster/qcontrol/utils/edit_user.php on line 5, referer: http://1.2.3.4/qcontrol/utils/list_users.php?domname=nottruedomain.com [Mon Mar 05 15:35:56 2012] [error] [client 1.2.3.57] PHP Notice: Undefined offset: 5 in /usr/share/toaster/qcontrol/utils/edit_user.php on line 30, referer: http://1.2.3.4/qcontrol/utils/list_users.php?domname=nottruedomain.com [Mon Mar 05 15:35:56 2012] [error] [client 1.2.3.57] PHP Notice: Undefined offset: 6 in /usr/share/toaster/qcontrol/utils/edit_user.php on line 31, referer: http://1.2.3.4/qcontrol/utils/list_users.php?domname=nottruedomain.com [Mon Mar 05 15:35:56 2012] [error] [client 1.2.3.57] PHP Notice: Undefined offset: 7 in /usr/share/toaster/qcontrol/utils/edit_user.php on line 32, referer: http://1.2.3.4/qcontrol/utils/list_users.php?domname=nottruedomain.com [Mon Mar 05 15:35:56 2012] [error] [client 1.2.3.57] PHP Notice: Undefined offset: 8 in /usr/share/toaster/qcontrol/utils/edit_user.php on line 33, referer: http://1.2.3.4/qcontrol/utils/list_users.php?domname=nottruedomain.com [Mon Mar 05 15:35:56 2012] [error] [client 1.2.3.57] PHP Notice: Undefined offset: 9 in /usr/share/toaster/qcontrol/utils/edit_user.php on line 34, referer: http://1.2.3.4/qcontrol/utils/list_users.php?domname=nottruedomain.com [Mon Mar 05 15:35:56 2012] [error] [client 1.2.3.57] PHP Notice: Undefined offset: 10 in /usr/share/toaster/qcontrol/utils/edit_user.php on line 35, referer: http://1.2.3.4/qcontrol/utils/list_users.php?domname=nottruedomain.com [Mon Mar 05 15:35:56 2012] [error] [client 1.2.3.57] PHP Notice: Undefined variable: PHP_SELF in /usr/share/toaster/qcontrol/utils/edit_user.php on line 239, referer: http://1.2.3.4/qcontrol/utils/list_users.php?domname=nottruedomain.com [Mon Mar 05 15:35:56 2012] [error] [client 1.2.3.57] PHP Notice: Undefined variable: no_pop in /usr/share/toaster/qcontrol/utils/edit_user.php on line 246, referer: http://1.2.3.4/qcontrol/utils/list_users.php?domname=nottruedomain.com [Mon Mar 05 15:35:56 2012] [error] [client 1.2.3.57] PHP Notice: Undefined variable: no_imap in /usr/share/toaster/qcontrol/utils/edit_user.php on line 247, referer: http://1.2.3.4/qcontrol/utils/list_users.php?domname=nottruedomain.com [Mon Mar 05 15:35:56 2012] [error] [client 1.2.3.57] PHP Notice: Undefined variable: no_webmail in /usr/share/toaster/qcontrol/utils/edit_user.php on line 248, referer: http://1.2.3.4/qcontrol/utils/list_users.php?domname=nottruedomain.com [Mon Mar 05 15:35:56 2012] [error] [client 1.2.3.57] PHP Notice: Undefined variable: no_passwd_chng in /usr/share/toaster/qcontrol/utils/edit_user.php on line 249, referer: http://1.2.3.4/qcontrol/utils/list_users.php?domname=nottruedomain.com [Mon Mar 05 15:35:56 2012] [error] [client 1.2.3.57] PHP Notice: Undefined variable: no_relay in /usr/share/toaster/qcontrol/utils/edit_user.php on line 250, referer: http://1.2.3.4/qcontrol/utils/list_users.php?domname=nottruedomain.com [Mon Mar 05 15:35:56 2012] [error] [client 1.2.3.57] PHP Notice: Undefined variable: no_inbound in /usr/share/toaster/qcontrol/utils/edit_user.php on line 251, referer: http://1.2.3.4/qcontrol/utils/list_users.php?domname=nottruedomain.com [Mon Mar 05 15:35:56 2012] [error] [client 1.2.3.57] PHP Notice: Undefined variable: admin_rights in /usr/share/toaster/qcontrol/utils/edit_user.php on line 253, referer: http://1.2.3.4/qcontrol/utils/list_users.php?domname=nottruedomain.com [Tue Mar 06 13:38:21 2012] [error] [client 1.2.3.5] P
Re: [qmailtoaster] Re: attachments
Checking now - Original Message - From: "Peter Peltonen" To: Sent: Wednesday, March 07, 2012 1:56 AM Subject: Re: [qmailtoaster] Re: attachments Hi, On Tue, Mar 6, 2012 at 11:50 PM, Eric Shubert wrote: Somehow I find that hard to believe. Something's different, and the chances of that being outside of the errant server are rather small indeed. ;) The problem, as is often the case, is finding the difference. Indeed. I assume there are no error messages in the Apache log? How about SElinux, is it disabled on both servers? If it is enabled, have you checked that you get no errors in audit.log? My experience with CentOS servers is that if something that should work does not, SElinux is usually to blame :) Regards, Peter - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Re: attachments
Update: There were minor differances when I ran update on the " good " server, ( qtp-ami-up2date ) It said there was 1 update . I rans same on " bad " server , no updates from qtp-ami-up2date So I updated " Good " server, Ran yum update on both, No updates. I will check the apache logs on " Bad " server see if it shows any thing. Thanks all On 3/6/2012 2:50 PM, Eric Shubert wrote: Somehow I find that hard to believe. Something's different, and the chances of that being outside of the errant server are rather small indeed. ;) The problem, as is often the case, is finding the difference. As this functionality appears to be provided by the FileManager plugin, have you tried removing and reinstalling that plugin? I'm afraid I'm not very familiar with SM, so am not of much help beyond this. - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Mail bouncing
> Hi Rajesh > > > Email id and domain name is valid. Is it end server > problem. > > > > Regards, > Rajesh > > On Wed, Mar 7, 2012 at 2:31 PM, Rajesh M <24x7ser...@24x7server.net> > wrote: > >> > HI, >> > >> > >> > While i am sending mail from my id to sender side. >> Getting >> > below error in log also showing same error. Please guide me to fix the >> > issue. >> > >> > >> > Hi. This is the qmail-send program at xxx..com. >> > I'm afraid I wasn't able to deliver your message to the following >> > addresses. >> > This is a permanent error; I've given up. Sorry it didn't work out. >> > >> > : >> > User and password not set, continuing without authentication. >> > 1.1.1.1 does not like recipient. >> > Remote host said: 550-Verification failed for >> > 550-No Such User Here >> > 550 Sender verify failed >> > Giving up on 1.1.1.1. >> > >> > >> > >> > Regards, >> > Rajesh >> > >> >> >> hi >> >> the error message you got is >> >> ## >> Remote host said: 550-Verification failed for >> 550-No Such User Here >> 550 Sender verify failed >> ## >> >> when you get the message that "remote host said" it means that your >> server >> has contacted the recipient's server and the recipient's server is >> giving >> the error message >> >> in this case error message is : no such user / sender verify failed >> which >> means that the email id does not exist in the recipient's email server >> >> check for spelling mistakes in user id >> or you may need to call the recipient's domain administrator and ask for >> the correct email id. >> >> rajesh >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> - >> Qmailtoaster is sponsored by Vickers Consulting Group ( >> www.vickersconsulting.com) >>Vickers Consulting Group offers Qmailtoaster support and >> installations. >> If you need professional help with your setup, contact them today! >> >> - >> Please visit qmailtoaster.com for the latest news, updates, and >> packages. >> >> To unsubscribe, e-mail: >> qmailtoaster-list-unsubscr...@qmailtoaster.com >> For additional commands, e-mail: >> qmailtoaster-list-h...@qmailtoaster.com >> >> >> > > > -- > Regards, > RAJESH.R, > VPSADMIN, > WEBINDIA INTERNET SERVICES PVT LTD. > rajesh it is possible that everything looks valid but there may be some small quotes, space or some other thing that makes it invalid. try to type the email id in a note pad and copy it in the to line and send. also try to use hotmail / gmail etc and email the same email id and see if the message gets delivered. Note that the rejection message is from the recipient party server so you have to contact them and verify with them in case the above do not work. rajesh - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Mail bouncing
Hi Rajesh Email id and domain name is valid. Is it end server problem. Regards, Rajesh On Wed, Mar 7, 2012 at 2:31 PM, Rajesh M <24x7ser...@24x7server.net> wrote: > > HI, > > > > > > While i am sending mail from my id to sender side. Getting > > below error in log also showing same error. Please guide me to fix the > > issue. > > > > > > Hi. This is the qmail-send program at xxx..com. > > I'm afraid I wasn't able to deliver your message to the following > > addresses. > > This is a permanent error; I've given up. Sorry it didn't work out. > > > > : > > User and password not set, continuing without authentication. > > 1.1.1.1 does not like recipient. > > Remote host said: 550-Verification failed for > > 550-No Such User Here > > 550 Sender verify failed > > Giving up on 1.1.1.1. > > > > > > > > Regards, > > Rajesh > > > > > hi > > the error message you got is > > ## > Remote host said: 550-Verification failed for > 550-No Such User Here > 550 Sender verify failed > ## > > when you get the message that "remote host said" it means that your server > has contacted the recipient's server and the recipient's server is giving > the error message > > in this case error message is : no such user / sender verify failed which > means that the email id does not exist in the recipient's email server > > check for spelling mistakes in user id > or you may need to call the recipient's domain administrator and ask for > the correct email id. > > rajesh > > > > > > > > > > > > > > > > > > - > Qmailtoaster is sponsored by Vickers Consulting Group ( > www.vickersconsulting.com) >Vickers Consulting Group offers Qmailtoaster support and installations. > If you need professional help with your setup, contact them today! > > - > Please visit qmailtoaster.com for the latest news, updates, and > packages. > > To unsubscribe, e-mail: > qmailtoaster-list-unsubscr...@qmailtoaster.com > For additional commands, e-mail: > qmailtoaster-list-h...@qmailtoaster.com > > > -- Regards, RAJESH.R, VPSADMIN, WEBINDIA INTERNET SERVICES PVT LTD.
Re: [qmailtoaster] Mail bouncing
Hi Rajesh Email id and domain name is valid. Is it end server problem. Regards, Rajesh On Wed, Mar 7, 2012 at 2:31 PM, Rajesh M <24x7ser...@24x7server.net> wrote: > > HI, > > > > > > While i am sending mail from my id to sender side. Getting > > below error in log also showing same error. Please guide me to fix the > > issue. > > > > > > Hi. This is the qmail-send program at xxx..com. > > I'm afraid I wasn't able to deliver your message to the following > > addresses. > > This is a permanent error; I've given up. Sorry it didn't work out. > > > > : > > User and password not set, continuing without authentication. > > 1.1.1.1 does not like recipient. > > Remote host said: 550-Verification failed for > > 550-No Such User Here > > 550 Sender verify failed > > Giving up on 1.1.1.1. > > > > > > > > Regards, > > Rajesh > > > > > hi > > the error message you got is > > ## > Remote host said: 550-Verification failed for > 550-No Such User Here > 550 Sender verify failed > ## > > when you get the message that "remote host said" it means that your server > has contacted the recipient's server and the recipient's server is giving > the error message > > in this case error message is : no such user / sender verify failed which > means that the email id does not exist in the recipient's email server > > check for spelling mistakes in user id > or you may need to call the recipient's domain administrator and ask for > the correct email id. > > rajesh > > > > > > > > > > > > > > > > > > - > Qmailtoaster is sponsored by Vickers Consulting Group ( > www.vickersconsulting.com) >Vickers Consulting Group offers Qmailtoaster support and installations. > If you need professional help with your setup, contact them today! > > - > Please visit qmailtoaster.com for the latest news, updates, and > packages. > > To unsubscribe, e-mail: > qmailtoaster-list-unsubscr...@qmailtoaster.com > For additional commands, e-mail: > qmailtoaster-list-h...@qmailtoaster.com > > > -- Regards, RAJESH.R, VPSADMIN, WEBINDIA INTERNET SERVICES PVT LTD.
Re: [qmailtoaster] Re: chkuser rejecting mail to users with hyphens
Il 06/03/2012 20:37, Eric Shubert ha scritto: On 03/06/2012 10:44 AM, Tonix (Antonio Nati) wrote: Il 06/03/2012 18:29, Eric Shubert ha scritto: Would you suggest we be using the #define CHKUSER_ENABLE_USERS_EXTENSIONS by default? It seems to me we should, as the "-anything" extension is a standard part of qmail (unless I'm mistaken). If we should, can it be enabled with an environment variable, or is it strictly a #define setting? Extensions are used for TMDA (I don't know if it is still used), ezml maling lists, mailman lists, user extensions. chkuser has different options: - user extensions - mailman lists - ezmlm lists you do not need user extension if you are in normal situations (I have only ezmlm lists enabled). You need the user extension if you use TMDA or in cases in which you want to receive extensions. In this case, chkuser checks for recipient existance, and if fails tries again shifting towards left (using '-' as token to search). With ezmlm and mailman lists enabled, it checks if recipient is associated to a ezmlm/mailman list, and in such a case it accepts extensions for that recipient. Thanks for the great explanation Tonino. That clears things up for me. I still have a couple questions though. What's the down side of enabling user extensions? qmail provides this capability by default. It seems to me that QMT should as well. No? This is up to you. With extensions DJB probably wanted to extend recipients possibilities, giving different address (i.e. eric, eric-test, eric-lab, eric-sales) and handle ezmlm extensions (ezmlm works heavily with extensions). In my situation, extensions are not needed, and I prefer to keep a 'standard' situation (only real account/aliases/lists work). Other situations may be different. Regarding mailman extensions, I have a QMT host running mailman with chkuser's mailman extensions disabled. This domain also has a catchall account. If I were to set catchall to bounce, I would also need to enable mailman list extensions for mailman to continue to work. Correct? Yes, correct. Catchall does not benefit of chkuser capabilities, while user-extensions or mailman features do. If I understand correctly, applying this setting would fix Russ's problem. Or I suppose he could set a catchall account. Correct? catchall is to be avoided if possible, as it accept always any recipient and does not give any advantage to traffic/workload. It should be used when you setup a new domain (coming from another ISP) on which you don't know which accounts exist. So, for some time, you accept all recipients and create accounts as you understand which accounts are needed. At end of all you kill the catchall feauture and enable 'bouncing'. While I understand your scenario for when it should be used, I disagree that it should be avoided if possible. That may be the case for a service provider which has hundreds if not thousands of accounts, but not in all cases. I agree, it depends on situations. In my case, when a user need an extension, he adds an alias. I suggest only expert people should use catchall, as no error message is sent back, so senders are not notified about not existing recipients. In situations where a domain is more private, a catchall account allows a large degree of flexibility regarding how email addresses are used. For instance, when I shop at SomeStore and they want my email address, I give them somest...@mydomain.com, and the mail is delivered. I then typically set up a forward for that address to a real account once I receive an email to that address in my catchall account. If I happen to start receiving spam to that address, I can discontinue use of that address by adding to the badmailto file, or if I'm in a bad mood, forward the spam back to the store who I gave the address to. :) BL, the catchall account saves me from having to remember to create a forward for every email address I happen to hand out. As is the case so many time, one size does not fit all. ;) It is true, but in this situation you are not really using chkuser, as any recipient is accepted for your domain. You (system manager) may change badmailfrom, but normal users or qmailadmin administrators cannot. As conseguence, all spam messages become real traffic instead of being stopped at SMTP level. I didn't mean to suggest using a catchall account was a good solution to this problem, only a quick and dirty workaround. I suggest to create aliases if cases are a few, otherwise enable user extensions. I'm not seeing much of a down side to enabling all 3 of these settings by default. What is the down side in your view? I'm inclined to change the QMT default configuration to allow all 3 by default, which brings QMT in line with qmail's default behavior. However I certainly wouldn't do this without consulting you, as well as anyone else who'd like to chime in on this. It is pretty normal to enable all three. This will
Re: [qmailtoaster] Mail bouncing
> HI, > > > While i am sending mail from my id to sender side. Getting > below error in log also showing same error. Please guide me to fix the > issue. > > > Hi. This is the qmail-send program at xxx..com. > I'm afraid I wasn't able to deliver your message to the following > addresses. > This is a permanent error; I've given up. Sorry it didn't work out. > > : > User and password not set, continuing without authentication. > 1.1.1.1 does not like recipient. > Remote host said: 550-Verification failed for > 550-No Such User Here > 550 Sender verify failed > Giving up on 1.1.1.1. > > > > Regards, > Rajesh > hi the error message you got is ## Remote host said: 550-Verification failed for 550-No Such User Here 550 Sender verify failed ## when you get the message that "remote host said" it means that your server has contacted the recipient's server and the recipient's server is giving the error message in this case error message is : no such user / sender verify failed which means that the email id does not exist in the recipient's email server check for spelling mistakes in user id or you may need to call the recipient's domain administrator and ask for the correct email id. rajesh - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Re: attachments
Hi, On Tue, Mar 6, 2012 at 11:50 PM, Eric Shubert wrote: > Somehow I find that hard to believe. Something's different, and the chances > of that being outside of the errant server are rather small indeed. ;) The > problem, as is often the case, is finding the difference. Indeed. I assume there are no error messages in the Apache log? How about SElinux, is it disabled on both servers? If it is enabled, have you checked that you get no errors in audit.log? My experience with CentOS servers is that if something that should work does not, SElinux is usually to blame :) Regards, Peter - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com