Re: [RBW] TA Zephyr triple and bb length
I have a Zephyr triple, and I can't remember for sure, but think that might be the BB length. My middle ring is 36T, so clearance isn't a problem. I tried plain rings and couldn't get it to shift at all, so went back to TA ramped/pinned rings and it's perfect. FWIW I bought from wiggle.co.uk which seem to have the best supply & prices on TA rings. On Wed, Oct 19, 2011 at 7:01 PM, Norman Bone wrote: > Hello- > > Are you running a TA Zephyr triple on your Riv? What brand of bb and length > are you using? > > I have a match-built AR with a Phil 123+3 and the teeth on the 42 middle > ring are so close to the stay I can barely see light in the gap. Wondering > if I should go longer, live with it or go to a smaller chainring. > > Possible related issue: the chain skates on the middle ring when shifting > down from the 46t big ring. The rings are not ramped and pinned. Chain > angle? > > Thanks- > > Norm in Portland, OR > > -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To post to this group, send email to rbw-owners-bunch@googlegroups.com. > To unsubscribe from this group, send email to > rbw-owners-bunch+unsubscr...@googlegroups.com. > For more options, visit this group at > http://groups.google.com/group/rbw-owners-bunch?hl=en. > -- Cheers, David Redlands, CA ** -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to rbw-owners-bunch@googlegroups.com. To unsubscribe from this group, send email to rbw-owners-bunch+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.
Re: [RBW] TA Zephyr triple and bb length
I've run inners as close as 2 mm to the stay with no problems -- IIRC, Sheldon permits as little -- but would not want personally to go closer. IIRC, too, someone on the Boblist was selling a 125 mm Phil with rings for $85 shipped. I put a spare 113 Phil on the trike when I swapped out the SunTour triple for a TA Cyclotourist and found that, even shoved at least 3 mm to the right, it would not accomodate an inner 26, so I am running just a single 44, which is fine except for a couple of short area hills. Must find a 118 or so. On Wed, Oct 19, 2011 at 8:01 PM, Norman Bone wrote: > Hello- > Are you running a TA Zephyr triple on your Riv? What brand of bb and length > are you using? > I have a match-built AR with a Phil 123+3 and the teeth on the 42 middle > ring are so close to the stay I can barely see light in the gap. Wondering > if I should go longer, live with it or go to a smaller chainring. > > Possible related issue: the chain skates on the middle ring when shifting > down from the 46t big ring. The rings are not ramped and pinned. Chain > angle? > > Thanks- > Norm in Portland, OR > > -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To post to this group, send email to rbw-owners-bunch@googlegroups.com. > To unsubscribe from this group, send email to > rbw-owners-bunch+unsubscr...@googlegroups.com. > For more options, visit this group at > http://groups.google.com/group/rbw-owners-bunch?hl=en. > -- Patrick Moore Albuquerque, NM For professional resumes, contact Patrick Moore, ACRW http://resumespecialties.com/index.html -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to rbw-owners-bunch@googlegroups.com. To unsubscribe from this group, send email to rbw-owners-bunch+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.
Re: [RBW] TA Zephyr triple and bb length
No daylight between ring and chainstay eventually means a nice gouge in your frame. I seem to recall 125mm being spec'd for this application..you need that 125 Phil. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To view this discussion on the web visit https://groups.google.com/d/msg/rbw-owners-bunch/-/5_K18QIfP6EJ. To post to this group, send email to rbw-owners-bunch@googlegroups.com. To unsubscribe from this group, send email to rbw-owners-bunch+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.
Re: [RBW] TA Zephyr triple and bb length
Good morning- After doing some reading on PJW's site (http://www.peterwhitecycles.com/) it appears that TA switched from ISO to JIS tapers after my cranks were made. So how much of an issue is it to use ISO taper cranks on a JIS taper spindle? Could someone educate me on this or point me to some further reading? Thanks- Norman in Portland, OR From: Joe Bernard To: rbw-owners-bunch@googlegroups.com Sent: Thursday, October 20, 2011 8:31 AM Subject: Re: [RBW] TA Zephyr triple and bb length No daylight between ring and chainstay eventually means a nice gouge in your frame. I seem to recall 125mm being spec'd for this application..you need that 125 Phil. -- On Wed, Oct 19, 2011 at 8:01 PM, Norman Bone wrote: > Hello- > Are you running a TA Zephyr triple on your Riv? What brand of bb and length > are you using? > I have a match-built AR with a Phil 123+3 and the teeth on the 42 middle > ring are so close to the stay I can barely see light in the gap. Wondering > if I should go longer, live with it or go to a smaller chainring. > > Possible related issue: the chain skates on the middle ring when shifting > down from the 46t big ring. The rings are not ramped and pinned. Chain > angle? > > Thanks- > Norm in Portland, OR -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to rbw-owners-bunch@googlegroups.com. To unsubscribe from this group, send email to rbw-owners-bunch+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.
Re: [RBW] TA Zephyr triple and bb length
AASHTA: http://sheldonbrown.com/bbtaper.html -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To view this discussion on the web visit https://groups.google.com/d/msg/rbw-owners-bunch/-/oNNcfGXTdhUJ. To post to this group, send email to rbw-owners-bunch@googlegroups.com. To unsubscribe from this group, send email to rbw-owners-bunch+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.