[Repeater-Builder] WTB: Need manual for old Moto
Hi, all, I am restoring an old Moto L43GGB desktop base. (OK, stop laughing.) So, I would like to find a manual, if someone has one collecting dust in an old box and would wish to sell it. Contact me direct at (my call) (at) verizon (dot) net. Thanks Dennis Bridgeman KCØFWN Bridgeman Communications 202 Seventh Street Carmi, IL 62821 http://bridgemancommunications.com
Re: [Repeater-Builder] Midland UHF PA
Adam, The Midland 71-5400 base/repeater amps needs 5w of drive. Dennis Bridgeman KCØFWN Bridgeman Communications 202 Seventh Street Carmi, IL 62821 http://bridgemancommunications.com - Original Message - From: Adam C. Feuer To: repeater-builder@yahoogroups.com Sent: Monday, October 13, 2008 4:37 PM Subject: [Repeater-Builder] Midland UHF PA Hello All, I have come into a few Midland UHF power amplifiers. On the PA's, it's labeled as a model number 71-5400B, 120 watts out, and freq range of 450-470. Does anyone know the drive requirements for this PA? I've looked through the RB web site as well as Midlands web site and have found nothing. When I Google the amp the only info that comes up is a few Ebay auctions. Any help would be greatly appreciated. Thanks!! Adam N2ACF
Re: [Repeater-Builder] Re: Homebrew DB-408-Sort of...
Carl, On mine, they showed up as attachments, which when I clicked on them, they opened right up. Dennis Bridgeman KCØFWN Bridgeman Communications 202 Seventh Street Carmi, IL 62821 http://bridgemancommunications.com - Original Message - From: ka9gpx To: Repeater-Builder@yahoogroups.com Sent: Tuesday, June 03, 2008 7:33 PM Subject: [Repeater-Builder] Re: Homebrew DB-408-Sort of... --- In Repeater-Builder@yahoogroups.com, Dan Hancock <[EMAIL PROTECTED]> wrote: > > I saved this from previous posts a few years ago. This should help anyone re-build or modify any of the DB folded dipole antennas that use single dipole elements. > > The attachments are a Word doc and a PDF that should be added to the site somewhere. (hint hint) ;-] > > Dan N8DJP Hi Dan, Unfortunately, Your "attachments" are not "stored" by the groups e-mail system. I believe You would first have to "Post" them to a folder . Then everyone could "Take-a Peek".I'm "sorta new round these parts" so I'm not quite sure if this is something you could do, or if it has to be handled through one of the moderators..BUT...You could e-mail them "direct" to me at the E-Mail listed Would be most interested in taking a look at the info.Like you said, Maybe it could be put in the "files" section 73 Carl KA9GPX
Re: [Repeater-Builder] Midland Land Mobile Model 70-9020
Trevor, The radio is a 70-9020 and has the same pinout as the Midland XTR 8-channel radios. I have the pinouts on my website. Click on the "Midland Wiring Diagrams" tab. Under the "SynTech I and XTR models" section, click on the XTR (8-channel models) wiring diagram. It will have what you need. Contact me with any questions. Dennis Bridgeman KCØFWN Bridgeman Communications 202 Seventh Street Carmi, IL 62821 http://bridgemancommunications.com - Original Message - From: Trevor To: Repeater-Builder@yahoogroups.com Sent: Saturday, February 02, 2008 4:20 PM Subject: [Repeater-Builder] Midland Land Mobile Model 70-9020 Hello group:I need pin out info on this radio of the rear power connector so I can play with it !! any one help me out its 15 watt 800 mhz trunking 200 channel radio,, thin black ,,with plastic bottom cover... any info or file locations on the net would be nice as well.. I hope some one can help me..Ve3tlt Trevor.
Re: [Repeater-Builder] Wow!!! only $449!!!!
Ken, Can you verify the auction number? I don't get anything to come up. Whatever it is, at this price, I may want to get 2 or 3 of them! Dennis Bridgeman KCØFWN Bridgeman Communications 202 Seventh Street Carmi, IL 62821 http://bridgemancommunications.com - Original Message - From: Ken Arck To: Repeater-Builder@yahoogroups.com Sent: Saturday, December 22, 2007 12:56 PM Subject: [Repeater-Builder] Wow!!! only $449 Do an Ebay search for this item number 28018586872 Such a deal!! Ken -- President and CTO - Arcom Communications Makers of repeater controllers and accessories. http://www.arcomcontrollers.com/ Authorized Dealers for Kenwood and Telewave and we offer complete repeater packages! AH6LE/R - IRLP Node 3000 http://www.irlp.net "We don't just make 'em. We use 'em!"
Re: [Repeater-Builder] Re: check it out... the rare GE radio is back on eBay
I, also, bought from him. First and last time! I bought 7 Midland mobiles, with a few other odd pieces, which he just threw into a cardboard box. Of the 7 radios, 4 were physically damaged from shipping. Dennis Bridgeman KCØFWN Bridgeman Communications 202 Seventh Street Carmi, IL 62821 http://bridgemancommunications.com - Original Message - From: wb6ymh To: Repeater-Builder@yahoogroups.com Sent: Tuesday, November 13, 2007 2:55 PM Subject: [Repeater-Builder] Re: check it out... the rare GE radio is back on eBay --- In Repeater-Builder@yahoogroups.com, Nate Duehr <[EMAIL PROTECTED]> wrote: > > The rare GE "MASTR Eleven" has returned! > > <http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=150182394028> > > LOL! I've bought from that guy before. Nice guy, but he would mail eggs in an envelope! Luckily I bought Mitreks from him which are rectangular and hard to break. The postperson dropped the unpadded cardboard box on my concrete front porch before I could get to the door, maybe that's where that crack same from. 73's Skip WB6YMH
Re: [Repeater-Builder] Re: it's a Sinclair... Nope, its a Antenna Specialists!
Laryn, No, I haven't been able to test it out, since the harness is damaged. But, I didn't want to put a lot into a harness if it wasn't the "B" version. Dennis Bridgeman KCØFWN Bridgeman Communications 202 Seventh Street Carmi, IL 62821 http://bridgemancommunications.com - Original Message - From: Laryn Lohman To: Repeater-Builder@yahoogroups.com Sent: Tuesday, May 01, 2007 8:58 PM Subject: [Repeater-Builder] Re: it's a Sinclair... Nope, its a Antenna Specialists! --- In Repeater-Builder@yahoogroups.com, "Dennis Bridgeman" <[EMAIL PROTECTED]> wrote: > > Thanks, now just to try and find out which band it was made for. > Have you checked it with an analyzer or what the SWR is at your frequency of interest? I have a ASPB602 and it IS broad as a barn. Laryn K8TVZ
Re: [Repeater-Builder] Re: it's a Sinclair... Nope, its a Antenna Specialists!
Thanks, now just to try and find out which band it was made for. Dennis Bridgeman KCØFWN Bridgeman Communications 202 Seventh Street Carmi, IL 62821 http://bridgemancommunications.com - Original Message - From: [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Tuesday, May 01, 2007 4:42 PM Subject: [Repeater-Builder] Re: it's a Sinclair... Nope, its a Antenna Specialists! ASP602 Here is the only listing I found .I thought I had a PDF around here! http://www.wiscointl.com/decibel/dipoles/asp601-602.htm -- See what's free at AOL.com.
Re: [Repeater-Builder] Re: it's a Sinclair... Nope, its a Antenna Specialists!
Hi, everyone, I have been following this thread and maybe someone out there can help me out. I have what appears to be the same thing in storage here. I am fairly certain mine is the 4-bay ASP602, but I have been trying to find information to help identify the freq band for it. I have been trying to find measurement references, but with no luck. Also, on each of the mounts, there is the number "4" stamped. Is there anyone that might have some info to help solve my dilemma? I would be happy to provide measurements. Dennis Bridgeman KCØFWN Bridgeman Communications 202 Seventh Street Carmi, IL 62821 http://bridgemancommunications.com - Original Message - From: [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Tuesday, May 01, 2007 3:27 PM Subject: Re: [Repeater-Builder] Re: it's a Sinclair... Nope, its a Antenna Specialists! In a message dated 5/1/2007 1:55:56 P.M. Central Daylight Time, [EMAIL PROTECTED] writes: Dig out an Antenna Specialists catalog. Looks like their "Power Director" series to me. Chuck WB2EDV Hi All! I think Chuck is right it looks like a ASPC 601 or 602 (assuming its a 4 bay) I have one along the side of the house, the element and mount is a golden brass color 73, Brian, WD9HSY -- See what's free at AOL.com.
Re: [Repeater-Builder] N connectors
Jim, A few months back, I bought a big bag of crimp BNCs for RG58. They arrived without the pins. I think these sleeves should work for you, since specs show both cables are 3/16 inch diameter. Maybe someone out there can verify this, but if you think will they will work, let me know how many you need. If you have a good supply, I will trade you all the sleeves you need for a few complete connectors, in return. Dennis Bridgeman KCØFWN Bridgeman Communications 202 Seventh Street Carmi, IL 62821 http://bridgemancommunications.com - Original Message - From: wd0ekr To: Repeater-Builder@yahoogroups.com Sent: Saturday, March 10, 2007 6:30 AM Subject: [Repeater-Builder] N connectors I bought a bag of new N connectors for RG 142 on ebay and they arrived missing the crimp sleeve, does anyone know of a source for these sleeves? 73 Jim wd0ekr
Re: [Repeater-Builder] N connectors
Jim, A few months back, I bought a big bag of crimp BNCs for RG58. They arrived without the pins. I think these sleeves should work for you, since specs show both cables are 3/16 inch diameter. Maybe someone out there can verify this, but if you think will they will work, let me know how many you need. If you have a good supply, I will trade you all the sleeves you need for a few complete connectors, in return. Dennis Bridgeman KCØFWN Bridgeman Communications 202 Seventh Street Carmi, IL 62821 http://bridgemancommunications.com - Original Message - From: wd0ekr To: Repeater-Builder@yahoogroups.com Sent: Saturday, March 10, 2007 6:30 AM Subject: [Repeater-Builder] N connectors I bought a bag of new N connectors for RG 142 on ebay and they arrived missing the crimp sleeve, does anyone know of a source for these sleeves? 73 Jim wd0ekr
[Repeater-Builder] Midland transmitter and receiver
Hello, all, I am looking for a set of TCXO's for the Midland UHF BaseTech repeater transmitter, 71-5051B, and the receiver 71-5052B. If no one has a spare set, I would consider the complete exciter and receiver, but these will need to have the TCXO's included. Contact me off list with info on what you have, at [EMAIL PROTECTED]<mailto:[EMAIL PROTECTED]>. Dennis Bridgeman KC0FWN Bridgeman Communications 202 Seventh Street Carmi, Illinois 62821 http://bridgemancommunications.com<http://bridgemancommunications.com/>
[Repeater-Builder] FS: Kathrein 420-449 MHz Omni Antenna
Thank you to all that responded. The antenna has been sold. Dennis Bridgeman 202 Seventh Street Carmi, Illinois 62821 _ FREE pop-up blocking with the new MSN Toolbar get it now! http://toolbar.msn.click-url.com/go/onm00200415ave/direct/01/ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] FS: Kathrein 420-449 MHz Omni Antenna
For Sale: One (1) NEW Kathrein UHF commercial grade base/repeater station antenna. This omni-directional Kathrein model K 75 16 22 1 has 7dbi gain in the 420-449 MHz range. This is a 50 ohm, 70 watt, fiberglass model. Type N connector at base. $75 plus actual UPS shipping. For more info, check out the following link: http://www.kathrein.de/de/mca/produkte/download/936074.pdf If interested, please contact off list. Dennis Bridgeman 202 Seventh Street Carmi, Illinois 62821 _ Dont just search. Find. Check out the new MSN Search! http://search.msn.click-url.com/go/onm00200636ave/direct/01/ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/