Re: [Repeater-Builder] Re: Need wacom duplexer mod info
Hello Freddy, Have you tried to tune it to your frequency? You may not need to cut the inner tuning rod, as it just may have enough travel to go to your frequency. It's worth a shot. My 42MHz cans went to 53Mhz with no problems. The loops will probably need to be modified. 73, Joe, K1ike Doug N3DAB --- In Repeater-Builder@yahoogroups.com, ag4uw ag...@... wrote: Hello group!! I am looking for someone that has info on mods for the wacom 604B duplexers to put them in the ham band 604D. And does anyone know how to remove the the tuning rod from the wacom duplexers??? Does the big nut on the top unscrew or can it be removed??? I am looking for info but have not been able to find anything on doing this mod. If I can remove the copper rod from the can I was going to try to cut it shorter,(If you know how long the tuning rod is on the D model please let me know. It can not be cut off from the end because it has finger stock on that end and will have to be cut off at the top. If anyone has any info please let me know. if you have the info on how long to cut the tunning rod off are know how long the tuning rod is on the 604D or have any info on how to remove the rod please let me know. any info you may have would be great. Thanks Freddy N4XW Yahoo! Groups Links
[Repeater-Builder] Re: Need wacom duplexer mod info
hey Joe Yes I have tried that and it will only go to 42mhz They are 35mhz to 40mhz cans and they will only go to 42mhz. The tuning rod is not the real problem I have it out and all I will need to do is cut more threads on the threaded rod so it will unscrew further up the can but the cooper sleave is what I need to get out to cut off and Im not sure how it comes out. There is a big nut on top of the can but have put some preasure on it but have had no luck on geting it to break loose. I dont wont to mess up the can so I am giving it a shot on here to see if anyone has done this are has any info on how short to cut the sleave. I have tried a plug in the end of the can to make it 8 shorter but that does not make a big change. The A B and C models are 80 long and the D is 72 But with the test I have done shows that the length of the cans is not the problem, it has a little effect, but very little. I can not find any info on the internal specs on these. Telewave and TX RX dont have any internal specs or can they tell me much info on them. If I make this work I will post the info on here for all to have I just need to figure out how to get my hands on the internal specs and how to remove the sleave and the length of the D model and the loop info will be the next thing I am going to need. Freddy N4XW --- In Repeater-Builder@yahoogroups.com, Joe k1ike_m...@... wrote: Hello Freddy, Have you tried to tune it to your frequency? You may not need to cut the inner tuning rod, as it just may have enough travel to go to your frequency. It's worth a shot. My 42MHz cans went to 53Mhz with no problems. The loops will probably need to be modified. 73, Joe, K1ike Doug N3DAB --- In Repeater-Builder@yahoogroups.com, ag4uw ag4uw@ wrote: Hello group!! I am looking for someone that has info on mods for the wacom 604B duplexers to put them in the ham band 604D. And does anyone know how to remove the the tuning rod from the wacom duplexers??? Does the big nut on the top unscrew or can it be removed??? I am looking for info but have not been able to find anything on doing this mod. If I can remove the copper rod from the can I was going to try to cut it shorter,(If you know how long the tuning rod is on the D model please let me know. It can not be cut off from the end because it has finger stock on that end and will have to be cut off at the top. If anyone has any info please let me know. if you have the info on how long to cut the tunning rod off are know how long the tuning rod is on the 604D or have any info on how to remove the rod please let me know. any info you may have would be great. Thanks Freddy N4XW Yahoo! Groups Links
[Repeater-Builder] Re: Need wacom duplexer mod info
I googled WACOM 604 duplexer and came up with a bunch of info., you might try the same. I found a 2 page WACOM 604 flyer with the specs says the A,B and C cans are 80 tall, and the D can is 72 tall. Logic would say shorten the inner rod 8, but loop size might be smaller and the harness cables may be different length as well. LOL on your project. Hope some one else has more info to help you out. Doug N3DAB --- In Repeater-Builder@yahoogroups.com, ag4uw ag...@... wrote: Hello group!! I am looking for someone that has info on mods for the wacom 604B duplexers to put them in the ham band 604D. And does anyone know how to remove the the tuning rod from the wacom duplexers??? Does the big nut on the top unscrew or can it be removed??? I am looking for info but have not been able to find anything on doing this mod. If I can remove the copper rod from the can I was going to try to cut it shorter,(If you know how long the tuning rod is on the D model please let me know. It can not be cut off from the end because it has finger stock on that end and will have to be cut off at the top. If anyone has any info please let me know. if you have the info on how long to cut the tunning rod off are know how long the tuning rod is on the 604D or have any info on how to remove the rod please let me know. any info you may have would be great. Thanks Freddy N4XW
[Repeater-Builder] Re: Need wacom duplexer mod info
Yes Doug I found that info but there was nothing about a Mod. Yes I did look before I posted. ??? Freddy --- In Repeater-Builder@yahoogroups.com, n3dab rb_n3...@... wrote: I googled WACOM 604 duplexer and came up with a bunch of info., you might try the same. I found a 2 page WACOM 604 flyer with the specs says the A,B and C cans are 80 tall, and the D can is 72 tall. Logic would say shorten the inner rod 8, but loop size might be smaller and the harness cables may be different length as well. LOL on your project. Hope some one else has more info to help you out. Doug N3DAB --- In Repeater-Builder@yahoogroups.com, ag4uw ag4uw@ wrote: Hello group!! I am looking for someone that has info on mods for the wacom 604B duplexers to put them in the ham band 604D. And does anyone know how to remove the the tuning rod from the wacom duplexers??? Does the big nut on the top unscrew or can it be removed??? I am looking for info but have not been able to find anything on doing this mod. If I can remove the copper rod from the can I was going to try to cut it shorter,(If you know how long the tuning rod is on the D model please let me know. It can not be cut off from the end because it has finger stock on that end and will have to be cut off at the top. If anyone has any info please let me know. if you have the info on how long to cut the tunning rod off are know how long the tuning rod is on the 604D or have any info on how to remove the rod please let me know. any info you may have would be great. Thanks Freddy N4XW