Thanks for the reply. This is kind of what I was thinking, but will the COR switches correspond to the other outputs?
Mathew
hwingate [EMAIL PROTECTED] wrote:
The CAT1000 has 8 outputs, pins 5,6,7 are outputs 1,2,3. Justconnect to 3 other outputs ( ex. pins18,19,20) and change the outputstatements in your macros to reflect the change. Do not use the samepins or you will have interaction between the two devices.--- In Repeater-Builder@yahoogroups.com, "w9mwq" <[EMAIL PROTECTED]>wrote: I am in the process of hooking up the RLS1000 to my Cat1000B Controller, but I also have a WX-200 hooked up to the system. The instruction tells me to wire control lines 5,6, and 7 to J1 on the Cat1000, but that is where I have control lines for the WX-200. There is connections already made at 5 and 6, and 7 is open. Do I piggy back them together? Or what should be done here? HELP. Thanks
MathewYahoo! Groups Links* To visit your group on the web, go to:http://groups.yahoo.com/group/Repeater-Builder/* To unsubscribe from this group, send an email to:[EMAIL PROTECTED]* Your use of Yahoo! Groups is subject to:http://docs.yahoo.com/info/terms/__Do You Yahoo!?Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com
Yahoo! Groups Links
To visit your group on the web, go to:http://groups.yahoo.com/group/Repeater-Builder/
To unsubscribe from this group, send an email to:[EMAIL PROTECTED]
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
