Re: [Repeater-Builder] Re: MSF5000 Tone Issue, PL 131.8 opens cor, non 131.8 keys repeater but no audio
heh-maybe you've been down this path, but try unplugging the controller and see if the repeater can be brought up. If it does, you have an internal path somewhere. n9lv wrote: That is what I thought was wrong first of all, tried it both ways and no change either way. I thought for sure when I wired up the controller that it was fine, but not sure when the other repeater came into the picture. I am going to check the switches today and see if there is anything there. Mathew --- In Repeater-Builder@yahoogroups.com, Jim Brown [EMAIL PROTECTED] wrote: Check to see if Zone 2 Function 5 is turned on. If on, it could let a COR signal get to your repeater without having the correct CTCSS frequency decoded. 73 - Jim W5ZIT --- On Sun, 8/31/08, n9lv [EMAIL PROTECTED] wrote: From: n9lv [EMAIL PROTECTED] Subject: [Repeater-Builder] MSF5000 Tone Issue, PL 131.8 opens cor, non 131.8 keys repeater but no audio To: Repeater-Builder@yahoogroups.com Date: Sunday, August 31, 2008, 10:44 AM
RE: [Repeater-Builder] Re: MSF5000 Tone Issue, PL 131.8 opens cor, non 131.8 keys repeater but no audio
Mathew, Try programming it for tone only control (I believe that is option S in both Repeater Control and Receiver Control. Mode Information screen) - this way even if the station hears a carrier, it wont react to it. I'm planning on doing that with my station - right now it's set for SC Mark - N9WYS -Original Message- From: Repeater-Builder@yahoogroups.com On Behalf Of n9lv That is what I thought was wrong first of all, tried it both ways and no change either way. I thought for sure when I wired up the controller that it was fine, but not sure when the other repeater came into the picture. I am going to check the switches today and see if there is anything there. Mathew --- In Repeater-Builder@yahoogroups.com, Jim Brown [EMAIL PROTECTED] wrote: Check to see if Zone 2 Function 5 is turned on. If on, it could let a COR signal get to your repeater without having the correct CTCSS frequency decoded. 73 - Jim W5ZIT