heh-maybe you've been down this path, but try unplugging the controller and see if the repeater can be brought up. If it does, you have an internal path somewhere.
n9lv wrote: > That is what I thought was wrong first of all, tried it both ways and > no change either way. I thought for sure when I wired up the > controller that it was fine, but not sure when the other repeater > came into the picture. I am going to check the switches today and > see if there is anything there. > > Mathew > > --- In Repeater-Builder@yahoogroups.com, Jim Brown <[EMAIL PROTECTED]> wrote: >> Check to see if Zone 2 Function 5 is turned on. If on, it could > let a COR signal get to your repeater without having the correct > CTCSS frequency decoded. >> 73 - Jim W5ZIT >> >> --- On Sun, 8/31/08, n9lv <[EMAIL PROTECTED]> wrote: >> From: n9lv <[EMAIL PROTECTED]> >> Subject: [Repeater-Builder] MSF5000 Tone Issue, PL 131.8 opens cor, > non 131.8 keys repeater but no audio >> To: Repeater-Builder@yahoogroups.com >> Date: Sunday, August 31, 2008, 10:44 AM >>
