Mathew, Try programming it for "tone only" control (I believe that is option "S" in both Repeater Control and Receiver Control. Mode Information screen) - this way even if the station hears a carrier, it wont "react" to it.
I'm planning on doing that with my station - right now it's set for "SC" Mark - N9WYS -----Original Message----- From: Repeater-Builder@yahoogroups.com On Behalf Of n9lv That is what I thought was wrong first of all, tried it both ways and no change either way. I thought for sure when I wired up the controller that it was fine, but not sure when the other repeater came into the picture. I am going to check the switches today and see if there is anything there. Mathew --- In Repeater-Builder@yahoogroups.com, Jim Brown <[EMAIL PROTECTED]> wrote: > > Check to see if Zone 2 Function 5 is turned on. If on, it could let a COR signal get to your repeater without having the correct CTCSS frequency decoded. > > 73 - Jim W5ZIT
