Re: CS>The MY 520S

2020-03-23 Thread Neville Munn 
Ha ha ha, Sorry Dan, you can stop slapping your forehead now...LOL. OK, I get 
it now, I just couldn't understand how the danged thing worked.

I put water in the 'unit', then put the medication 'cup' in, (with that rubber 
ring), and when I turned it on, I could see the 'medication' jumping all over 
the place.  I couldn't see how the danged thing worked.  Now I get it, that 
little cup sits *on top* of that little 'tower' in the unit, where the water 
is, and 'bumps' against the bottom of the medication cup, hence the medication 
jumps all over the place and causes mist.  The heat they are talking about must 
the temperature of water I figure, DON'T put hot water in it .

LOL, I did say I was a numpty...LOL.  Thanks mate.

OK, I'm ready to go, bring it on, gimme your best shot Corona "90210" thing, 
.  I got the old big one, now I have one for her who must be obeyed...LOL, 
if needed or backup.  It certainly pushes out some mist doesn't it, and I 
noticed it has an auto shut off as well, so you can re-start it again if you 
want.  What a great little gizmo.  Me and modern technology never were friends.

N.


From: Dan Nave 
Sent: Tuesday, 24 March 2020 4:30 PM
To: silver-list@eskimo.com 
Subject: Re: CS>The MY 520S

Neville, you and Reid are starting to scare me...

Ultrasonic nebulizers do not heat or boil the liquid to be nebulized.
Ultrasonic nebulizers work by vibrating at a frequency that is somewhat above 
the normal sound range for hearing, hence "ultra-sonic."
The ultrasonic vibrations must travel through a liquid for this to work, so you 
have to fill distilled water in the nebulizer up to the level where the clear 
plastic starts.
Then you fill your CS in the bottom half of the little cup and insert that into 
the unit.  There is a sealing ring that you install on top to keep it sealed 
properly.
The point of the little cup is to keep the liquid to be nebulized away from the 
vibrating part of the nebulizer so it doesn't gum it up.
Also, it lets you use less of the CS or whatever you are using.
This vibrating causes tiny particles on the surface of the liquid to "jump" 
into the air, so to speak, and float in the air as a mist.
Be careful installing the top of the nebulizer because it is somewhat fussy...

Hope that helps.

Dan

Re: CS>The MY 520S

2020-03-23 Thread Dan Nave 
Neville, you and Reid are starting to scare me...

Ultrasonic nebulizers do not heat or boil the liquid to be nebulized.
Ultrasonic nebulizers work by vibrating at a frequency that is somewhat
above the normal sound range for hearing, hence "ultra-sonic."
The ultrasonic vibrations must travel through a liquid for this to work, so
you have to fill distilled water in the nebulizer up to the level where the
clear plastic starts.
Then you fill your CS in the bottom half of the little cup and insert that
into the unit.  There is a sealing ring that you install on top to keep it
sealed properly.
The point of the little cup is to keep the liquid to be nebulized away from
the vibrating part of the nebulizer so it doesn't gum it up.
Also, it lets you use less of the CS or whatever you are using.
This vibrating causes tiny particles on the surface of the liquid to "jump"
into the air, so to speak, and float in the air as a mist.
Be careful installing the top of the nebulizer because it is somewhat
fussy...

Hope that helps.

Dan

On Mon, Mar 23, 2020 at 9:43 PM Neville Munn  wrote:

> These little Nebulisers.
>
> They say put water in the bottom bowl, insert medicine cup with your
> preferred medication, then turn it on.  I guess it heats the water up, but,
> is any of that water going to mix with my EIS?  Or does it just heat
> something up independently to the medication?  The old Nebuliser I have had
> for years doesn't take any water, so how do these little things work?
>
> Yeah, I know, I'm a dumb_rse, so humour me.  The little 'manual' talks
> about heat, which I guess is the water being heated?  I don't want to
> dilute my EIS.  My old one, you just put the medication in a little cup,
> turn it on and it's good to go.
>
> N.
>

Re: CS>The MY 520S

2020-03-23 Thread Reid Harvey 
Neville, I'm in your same boat and wondered if the water boiled, just
because I've been clueless about what 'ultrasonic' means.  Following is the
explanation I got from Ode, four days ago:

Not heated, but excited by very high frequency sound carried by the
distilled water surrounding the cup so that the silver doesn't contact the
ultrasonic transducer and pack silver into it via sound wave compression.

..which is really hard to clean out if it happens.
Ultrasonic Humidifiers work the same way and make MASSIVE clouds of
mist...but get clogged up after a while.

 Those sound waves will excite body parts too...stick a little finger in
bowl of water with an  Ultrasonic pond fogger in itand  it REALLY
HURTS.  ...makes the *bones *vibrate and feel HOT... OUCH!  [ Ultrasonic
Dental Scaler on small teeth..same thing ]

On Mon, Mar 23, 2020, 10:43 PM Neville Munn  wrote:

> These little Nebulisers.
>
> They say put water in the bottom bowl, insert medicine cup with your
> preferred medication, then turn it on.  I guess it heats the water up, but,
> is any of that water going to mix with my EIS?  Or does it just heat
> something up independently to the medication?  The old Nebuliser I have had
> for years doesn't take any water, so how do these little things work?
>
> Yeah, I know, I'm a dumb_rse, so humour me.  The little 'manual' talks
> about heat, which I guess is the water being heated?  I don't want to
> dilute my EIS.  My old one, you just put the medication in a little cup,
> turn it on and it's good to go.
>
> N.
>

CS>The MY 520S

2020-03-23 Thread Neville Munn 
These little Nebulisers.

They say put water in the bottom bowl, insert medicine cup with your preferred 
medication, then turn it on.  I guess it heats the water up, but, is any of 
that water going to mix with my EIS?  Or does it just heat something up 
independently to the medication?  The old Nebuliser I have had for years 
doesn't take any water, so how do these little things work?

Yeah, I know, I'm a dumb_rse, so humour me.  The little 'manual' talks about 
heat, which I guess is the water being heated?  I don't want to dilute my EIS.  
My old one, you just put the medication in a little cup, turn it on and it's 
good to go.

N.

Re: CS>nebulizer MY-520

2020-03-23 Thread Catherine 



Sent from my iPhone

> On Mar 20, 2020, at 4:48 PM, JD  wrote:
> 
> For those looking for a nebulizer, I just bought one on ebay Thur.  Got
> a MY-520A for $18.85 will arrive on Monday.
> 
> 1) Go to  Ebay
> 
> 2) Search for "Portable Ultrasonic Nebulizer Handheld Nebuliser
> Respirator Humidifier Adult Kit"
> 
> 3) Select US only on left
> 
> 4) Should arrive in 3-4 days
> 
> Should pop up a few sellers for around $19 (this is a MY-520A). If you
> enter MY-520 you will get a a bunch from China that won't arrive for
> month or two. Or the price will be more.
> 
> 
> 
> 
> --
> The Silver List is a moderated forum for discussing Colloidal Silver.
> Rules and Instructions: http://www.silverlist.org
> 
> Unsubscribe:
> 
> Archives:  http://www.mail-archive.com/silver-list@eskimo.com/maillist.html
> 
> Off-Topic discussions: 
> List Owner: Mike Devour 
> 
>

Re: CS>Where do we find the three 9s generator schematic

2020-03-23 Thread maj.young 
work as good as cs for surfaces??? ,,ie kitchen, door knobs,,any advantage for 
either one ???  

From: Ode Coyote 
Sent: Monday, March 23, 2020 9:11 AM
To: silver-list@eskimo.com 
Subject: Re: CS>Where do we find the three 9s generator schematic

https://silverpuppy.com/article/using-the-silver-9-to-make-colloidal-copper.

You can use ANY generator, or any DC battery/power supply that puts out 20 or 
so volts..Auto off will not work...meters will not work... cannot 
"run-away"..no way to tell how strong you made it, but a strong flashlight will 
tell you that you made 'something'

Copper kills germs and is robust in the environment..used to sterilize pools 
and treat wood against fungus rot.


On Sun, Mar 22, 2020 at 9:07 AM  wrote:

  does colloidal copper work as a disinfectant,,how to make with a silver 
puppy

  From: Ode Coyote 
  Sent: Sunday, March 22, 2020 6:14 AM
  To: silver-list@eskimo.com 
  Subject: Re: CS>Where do we find the three 9s generator schematic

  https://www.colloidalsilver.com.au/FREE-DIY.html
  https://www.atlasnova.com  [for silver wire]

  Bullion coins will work.
  eBay for alligator clip leads.

  ode


  On Fri, Mar 20, 2020 at 11:04 PM Cyndiann Phillips  wrote:

Ebay has the little caps that go on the 9v batteries and also you an find 
the wire there as well. I use a . wire 

Cyndi

 Virus-free. www.avast.com  


On Fri, Mar 20, 2020 at 4:56 PM Reid Harvey  
wrote:

  Can someone answer this? And in the absence of Radio Shack where does one 
find the parts?  ...the 99.9% pure silver electrodes?

Re: CS>Where do we find the three 9s generator schematic

2020-03-23 Thread Ode Coyote 
https://silverpuppy.com/article/using-the-silver-9-to-make-colloidal-copper.

You can use ANY generator, or any DC battery/power supply that puts out 20
or so volts..Auto off will not work...meters will not work... cannot
"run-away"..no way to tell how strong you made it, but a strong flashlight
will tell you that you made 'something'

 Copper kills germs and is robust in the environment..used to sterilize
pools and treat wood against fungus rot.

On Sun, Mar 22, 2020 at 9:07 AM  wrote:

> does colloidal copper work as a disinfectant,,how to make with a silver
> puppy
>
> *From:* Ode Coyote 
> *Sent:* Sunday, March 22, 2020 6:14 AM
> *To:* silver-list@eskimo.com
> *Subject:* Re: CS>Where do we find the three 9s generator schematic
>
> https://www.colloidalsilver.com.au/FREE-DIY.html
> https://www.atlasnova.com  [for silver wire]
> Bullion coins will work.
> eBay for alligator clip leads.
>
> ode
>
> On Fri, Mar 20, 2020 at 11:04 PM Cyndiann Phillips 
> wrote:
>
>> Ebay has the little caps that go on the 9v batteries and also you an find
>> the wire there as well. I use a . wire
>>
>> Cyndi
>>
>>
>> 
>>  Virus-free.
>> www.avast.com
>> 
>>
>> On Fri, Mar 20, 2020 at 4:56 PM Reid Harvey 
>> wrote:
>>
>>> Can someone answer this? And in the absence of Radio Shack where does
>>> one find the parts?  ...the 99.9% pure silver electrodes?
>>>
>>