Re: CS>Lyme Disease and Colostrum Milk

2007-11-21 Thread Clive Mitchell
In message <4743d07a.40...@blackfoot.net>, Levi Philos 
 writes
I knew the ring voltage was higher cause I got a shock while rewiring a 
phone line once. Always thought the normal working voltage was lower, 
like perhaps 24 volt. Obvious to me that the 9 volt ac transformer is 
creating mostly the ionic silver, and I need to get higher voltage to 
get small colloidal size. I can handle it; don't need any more info.


Normal phone line voltages are roughly 50V DC on the hook, 12V DC off 
the hook (in use) and 75V AC ringing voltage.  So you can get a DC 
tingle from the line even when it's not ringing.  Not quite as 
surprising as a ringing shock though.


I tried the AC at 50Hz and the conductance of the water did not vary at 
all and there wasn't even a hint of the ionic silver.  I think the AC 
method really does require slow alternating or a much higher voltage to 
force a greater current through the water to drive the silver particles 
clear of the electrodes to prevent instant re-plating.


I like the idea of the phone line ionic silver generator.  Theoretically 
it would require little more than a resistor to limit the current from 
the line in it's standby (DC) state.  The resistor value would have to 
be high enough to limit the current through the water to a sensible 
level and also to prevent the exchange from misinterpreting the current 
flow as indicating that the phone had been picked up.


If you draw too much current the automatic exchanges will detect it 
during their automatic testing and may flag your line as bad.  A few 
milliamps would be no problem though. A 24K (24,000 ohm) quarter watt 
resistor would give a max of about 2mA for instance.



--
Clive Mitchell
http://www.bigclive.com


--
The Silver List is a moderated forum for discussing Colloidal Silver.

Instructions for unsubscribing are posted at: http://silverlist.org

To post, address your message to: silver-list@eskimo.com

Address Off-Topic messages to: silver-off-topic-l...@eskimo.com

The Silver List and Off Topic List archives are currently down...

List maintainer: Mike Devour 
  


CS>Lyme Disease and Colostrum Milk

2007-11-20 Thread Levi Philos




Thanks for the information on the 52 volt telephone line source.

I knew the ring voltage was higher cause I got a shock while rewiring a
phone line once. Always thought the normal working voltage was lower,
like perhaps 24 volt. Obvious to me that the 9 volt ac transformer is
creating mostly the ionic silver, and I need to get higher voltage to
get small colloidal size. I can handle it; don't need any more info.

In regards to the Lyme disease problem, do a search for Odin Minnesota
dairy farmer Herb Saunders and his colostrum milk treatment for lyme.

He was finally bankrupted from the repeated attempts to prosecute
him for practicing medicine with a license, but the evidence seemed
clear that he had cured lyme and several other nasty problems generally
regarded as incurable. I no longer have the full story in my personal
archives, but the whole story is easy to discover. There is little
information (that I ever found) about how the blood may have been
factored prior to injection into the pregnant cow. 

Levi

PS. A good thread title can sometimes set the net afire. Search for
"Notes of Debt are not Income" for an example.





--
The Silver List is a moderated forum for discussing Colloidal Silver.

Instructions for unsubscribing are posted at: http://silverlist.org

To post, address your message to: silver-list@eskimo.com

Address Off-Topic messages to: silver-off-topic-l...@eskimo.com

The Silver List and Off Topic List archives are currently down...

List maintainer: Mike Devour