Re: [RCSE] Common trim mode on JR 9303
Besides getting a better servo or linkage, you could use some other knob and a mix into the elevator as your drift compensator. Or don't use any flight modes and do your own mixes if you have minimal changes between flight modes. John Kappus wrote: Common trim mode on 9303 ? I have a question on the 9303 regarding the common trim mode when using flight modes. In the device select, I set trim mode to common, but I see in the monitor screen that common only refers to rudder and aileron. All other trim controls stay in flight mode. Even with the trim mode on common, a trim change to elevator in cruise does NOT affect thermal or launch trim. Since my servos in my DLGs have some drift, it's not uncommon for me to change trim on the 1st flight. I want this change to go to everything (all Flight Modes). I can get elevator presets as changes to 'normal' trim by adding in mixes. I know I can make FM trim work by changing sub trim IF I notice the drift before the round, but true common trim might work better for this problem. What am I missing? Thanks, John RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are generally NOT in text format
RE: [RCSE] Common trim mode on JR 9303
Or trim the elevator via the sub trim menu. That will cause the change to affect all flight modes From: Joe Rodriguez [mailto:[EMAIL PROTECTED] Sent: Tuesday, July 22, 2008 7:01 PM To: soaring@airage.com Subject: Re: [RCSE] Common trim mode on JR 9303 John, Buy some new servos... that will be a start - Original Message - From: John Kappus <mailto:[EMAIL PROTECTED]> To: soaring@airage.com Sent: Tuesday, July 22, 2008 2:19 PM Subject: [RCSE] Common trim mode on JR 9303 Common trim mode on 9303 ? I have a question on the 9303 regarding the common trim mode when using flight modes. In the device select, I set trim mode to common, but I see in the monitor screen that common only refers to rudder and aileron. All other trim controls stay in flight mode. Even with the trim mode on common, a trim change to elevator in cruise does NOT affect thermal or launch trim. Since my servos in my DLGs have some drift, it's not uncommon for me to change trim on the 1st flight. I want this change to go to everything (all Flight Modes). I can get elevator presets as changes to 'normal' trim by adding in mixes. I know I can make FM trim work by changing sub trim IF I notice the drift before the round, but true common trim might work better for this problem. What am I missing? Thanks, John
Re: [RCSE] Common trim mode on JR 9303
John, Buy some new servos... that will be a start - Original Message - From: John Kappus<mailto:[EMAIL PROTECTED]> To: soaring@airage.com<mailto:soaring@airage.com> Sent: Tuesday, July 22, 2008 2:19 PM Subject: [RCSE] Common trim mode on JR 9303 Common trim mode on 9303 ? I have a question on the 9303 regarding the common trim mode when using flight modes. In the device select, I set trim mode to common, but I see in the monitor screen that common only refers to rudder and aileron. All other trim controls stay in flight mode. Even with the trim mode on common, a trim change to elevator in cruise does NOT affect thermal or launch trim. Since my servos in my DLGs have some drift, it's not uncommon for me to change trim on the 1st flight. I want this change to go to everything (all Flight Modes). I can get elevator presets as changes to 'normal' trim by adding in mixes. I know I can make FM trim work by changing sub trim IF I notice the drift before the round, but true common trim might work better for this problem. What am I missing? Thanks, John
[RCSE] Common trim mode on JR 9303
Common trim mode on 9303 ? I have a question on the 9303 regarding the common trim mode when using flight modes. In the device select, I set trim mode to common, but I see in the monitor screen that common only refers to rudder and aileron. All other trim controls stay in flight mode. Even with the trim mode on common, a trim change to elevator in cruise does NOT affect thermal or launch trim. Since my servos in my DLGs have some drift, it's not uncommon for me to change trim on the 1st flight. I want this change to go to everything (all Flight Modes). I can get elevator presets as changes to 'normal' trim by adding in mixes. I know I can make FM trim work by changing sub trim IF I notice the drift before the round, but true common trim might work better for this problem. What am I missing? Thanks, John
